Baseline of hwcplus package taken from KitKat AOSP.

third_party/hwcplus/include/hardware/gralloc.h

Index: third_party/hwcplus/include/hardware/gralloc.h
diff --git a/third_party/hwcplus/include/hardware/gralloc.h b/third_party/hwcplus/include/hardware/gralloc.h
new file mode 100644
index 0000000000000000000000000000000000000000..0dbebcff214da43e69fd3227e2c3c1ba68626cc8
--- /dev/null
+++ b/third_party/hwcplus/include/hardware/gralloc.h
@@ -0,0 +1,313 @@
+/*
+ * Copyright (C) 2008 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+
+#ifndef ANDROID_GRALLOC_INTERFACE_H
+#define ANDROID_GRALLOC_INTERFACE_H
+
+#include <system/window.h>
+#include <system/graphics.h>
+#include <hardware/hardware.h>
+
+#include <stdint.h>
+#include <sys/cdefs.h>
+#include <sys/types.h>
+
+#include <cutils/native_handle.h>
+
+#include <hardware/hardware.h>
+#include <hardware/fb.h>
+
+__BEGIN_DECLS
+
+/**
+ * Module versioning information for the Gralloc hardware module, based on
+ * gralloc_module_t.common.module_api_version.
+ *
+ * Version History:
+ *
+ * GRALLOC_MODULE_API_VERSION_0_1:
+ * Initial Gralloc hardware module API.
+ *
+ * GRALLOC_MODULE_API_VERSION_0_2:
+ * Add support for flexible YCbCr format with (*lock_ycbcr)() method.
+ */
+
+#define GRALLOC_MODULE_API_VERSION_0_1  HARDWARE_MODULE_API_VERSION(0, 1)
+#define GRALLOC_MODULE_API_VERSION_0_2  HARDWARE_MODULE_API_VERSION(0, 2)
+
+#define GRALLOC_DEVICE_API_VERSION_0_1  HARDWARE_DEVICE_API_VERSION(0, 1)
+
+/**
+ * The id of this module
+ */
+#define GRALLOC_HARDWARE_MODULE_ID "gralloc"
+
+/**
+ * Name of the graphics device to open
+ */
+
+#define GRALLOC_HARDWARE_GPU0 "gpu0"
+
+enum {
+    /* buffer is never read in software */
+    GRALLOC_USAGE_SW_READ_NEVER         = 0x00000000,
+    /* buffer is rarely read in software */
+    GRALLOC_USAGE_SW_READ_RARELY        = 0x00000002,
+    /* buffer is often read in software */
+    GRALLOC_USAGE_SW_READ_OFTEN         = 0x00000003,
+    /* mask for the software read values */
+    GRALLOC_USAGE_SW_READ_MASK          = 0x0000000F,
+    
+    /* buffer is never written in software */
+    GRALLOC_USAGE_SW_WRITE_NEVER        = 0x00000000,
+    /* buffer is rarely written in software */
+    GRALLOC_USAGE_SW_WRITE_RARELY       = 0x00000020,
+    /* buffer is often written in software */
+    GRALLOC_USAGE_SW_WRITE_OFTEN        = 0x00000030,
+    /* mask for the software write values */
+    GRALLOC_USAGE_SW_WRITE_MASK         = 0x000000F0,
+
+    /* buffer will be used as an OpenGL ES texture */
+    GRALLOC_USAGE_HW_TEXTURE            = 0x00000100,
+    /* buffer will be used as an OpenGL ES render target */
+    GRALLOC_USAGE_HW_RENDER             = 0x00000200,
+    /* buffer will be used by the 2D hardware blitter */
+    GRALLOC_USAGE_HW_2D                 = 0x00000400,
+    /* buffer will be used by the HWComposer HAL module */
+    GRALLOC_USAGE_HW_COMPOSER           = 0x00000800,
+    /* buffer will be used with the framebuffer device */
+    GRALLOC_USAGE_HW_FB                 = 0x00001000,
+    /* buffer will be used with the HW video encoder */
+    GRALLOC_USAGE_HW_VIDEO_ENCODER      = 0x00010000,
+    /* buffer will be written by the HW camera pipeline */
+    GRALLOC_USAGE_HW_CAMERA_WRITE       = 0x00020000,
+    /* buffer will be read by the HW camera pipeline */
+    GRALLOC_USAGE_HW_CAMERA_READ        = 0x00040000,
+    /* buffer will be used as part of zero-shutter-lag queue */
+    GRALLOC_USAGE_HW_CAMERA_ZSL         = 0x00060000,
+    /* mask for the camera access values */
+    GRALLOC_USAGE_HW_CAMERA_MASK        = 0x00060000,
+    /* mask for the software usage bit-mask */
+    GRALLOC_USAGE_HW_MASK               = 0x00071F00,
+
+    /* buffer will be used as a RenderScript Allocation */
+    GRALLOC_USAGE_RENDERSCRIPT          = 0x00100000,
+
+    /* buffer should be displayed full-screen on an external display when
+     * possible
+     */
+    GRALLOC_USAGE_EXTERNAL_DISP         = 0x00002000,
+
+    /* Must have a hardware-protected path to external display sink for
+     * this buffer.  If a hardware-protected path is not available, then
+     * either don't composite only this buffer (preferred) to the
+     * external sink, or (less desirable) do not route the entire
+     * composition to the external sink.
+     */
+    GRALLOC_USAGE_PROTECTED             = 0x00004000,
+
+    /* implementation-specific private usage flags */
+    GRALLOC_USAGE_PRIVATE_0             = 0x10000000,
+    GRALLOC_USAGE_PRIVATE_1             = 0x20000000,
+    GRALLOC_USAGE_PRIVATE_2             = 0x40000000,
+    GRALLOC_USAGE_PRIVATE_3             = 0x80000000,
+    GRALLOC_USAGE_PRIVATE_MASK          = 0xF0000000,
+};
+
+/*****************************************************************************/
+
+/**
+ * Every hardware module must have a data structure named HAL_MODULE_INFO_SYM
+ * and the fields of this data structure must begin with hw_module_t
+ * followed by module specific information.
+ */
+typedef struct gralloc_module_t {
+    struct hw_module_t common;
+    
+    /*
+     * (*registerBuffer)() must be called before a buffer_handle_t that has not
+     * been created with (*alloc_device_t::alloc)() can be used.
+     * 
+     * This is intended to be used with buffer_handle_t's that have been
+     * received in this process through IPC.
+     * 
+     * This function checks that the handle is indeed a valid one and prepares
+     * it for use with (*lock)() and (*unlock)().
+     * 
+     * It is not necessary to call (*registerBuffer)() on a handle created 
+     * with (*alloc_device_t::alloc)().
+     * 
+     * returns an error if this buffer_handle_t is not valid.
+     */
+    int (*registerBuffer)(struct gralloc_module_t const* module,
+            buffer_handle_t handle);
+
+    /*
+     * (*unregisterBuffer)() is called once this handle is no longer needed in
+     * this process. After this call, it is an error to call (*lock)(),
+     * (*unlock)(), or (*registerBuffer)().
+     * 
+     * This function doesn't close or free the handle itself; this is done
+     * by other means, usually through libcutils's native_handle_close() and
+     * native_handle_free(). 
+     * 
+     * It is an error to call (*unregisterBuffer)() on a buffer that wasn't
+     * explicitly registered first.
+     */
+    int (*unregisterBuffer)(struct gralloc_module_t const* module,
+            buffer_handle_t handle);
+    
+    /*
+     * The (*lock)() method is called before a buffer is accessed for the 
+     * specified usage. This call may block, for instance if the h/w needs
+     * to finish rendering or if CPU caches need to be synchronized.
+     * 
+     * The caller promises to modify only pixels in the area specified 
+     * by (l,t,w,h).
+     * 
+     * The content of the buffer outside of the specified area is NOT modified
+     * by this call.
+     *
+     * If usage specifies GRALLOC_USAGE_SW_*, vaddr is filled with the address
+     * of the buffer in virtual memory.
+     *
+     * Note calling (*lock)() on HAL_PIXEL_FORMAT_YCbCr_*_888 buffers will fail
+     * and return -EINVAL.  These buffers must be locked with (*lock_ycbcr)()
+     * instead.
+     *
+     * THREADING CONSIDERATIONS:
+     *
+     * It is legal for several different threads to lock a buffer from 
+     * read access, none of the threads are blocked.
+     * 
+     * However, locking a buffer simultaneously for write or read/write is
+     * undefined, but:
+     * - shall not result in termination of the process
+     * - shall not block the caller
+     * It is acceptable to return an error or to leave the buffer's content
+     * into an indeterminate state.
+     *
+     * If the buffer was created with a usage mask incompatible with the
+     * requested usage flags here, -EINVAL is returned. 
+     * 
+     */
+    
+    int (*lock)(struct gralloc_module_t const* module,
+            buffer_handle_t handle, int usage,
+            int l, int t, int w, int h,
+            void** vaddr);
+
+    
+    /*
+     * The (*unlock)() method must be called after all changes to the buffer
+     * are completed.
+     */
+    
+    int (*unlock)(struct gralloc_module_t const* module,
+            buffer_handle_t handle);
+
+
+    /* reserved for future use */
+    int (*perform)(struct gralloc_module_t const* module,
+            int operation, ... );
+
+    /*
+     * The (*lock_ycbcr)() method is like the (*lock)() method, with the
+     * difference that it fills a struct ycbcr with a description of the buffer
+     * layout, and zeroes out the reserved fields.
+     *
+     * This will only work on buffers with HAL_PIXEL_FORMAT_YCbCr_*_888, and
+     * will return -EINVAL on any other buffer formats.
+     *
+     * Added in GRALLOC_MODULE_API_VERSION_0_2.
+     */
+
+    int (*lock_ycbcr)(struct gralloc_module_t const* module,
+            buffer_handle_t handle, int usage,
+            int l, int t, int w, int h,
+            struct android_ycbcr *ycbcr);
+
+    /* reserved for future use */
+    void* reserved_proc[6];
+} gralloc_module_t;
+
+/*****************************************************************************/
+
+/**
+ * Every device data structure must begin with hw_device_t
+ * followed by module specific public methods and attributes.
+ */
+
+typedef struct alloc_device_t {
+    struct hw_device_t common;
+
+    /* 
+     * (*alloc)() Allocates a buffer in graphic memory with the requested
+     * parameters and returns a buffer_handle_t and the stride in pixels to
+     * allow the implementation to satisfy hardware constraints on the width
+     * of a pixmap (eg: it may have to be multiple of 8 pixels). 
+     * The CALLER TAKES OWNERSHIP of the buffer_handle_t.
+     *
+     * If format is HAL_PIXEL_FORMAT_YCbCr_420_888, the returned stride must be
+     * 0, since the actual strides are available from the android_ycbcr
+     * structure.
+     * 
+     * Returns 0 on success or -errno on error.
+     */
+    
+    int (*alloc)(struct alloc_device_t* dev,
+            int w, int h, int format, int usage,
+            buffer_handle_t* handle, int* stride);
+
+    /*
+     * (*free)() Frees a previously allocated buffer. 
+     * Behavior is undefined if the buffer is still mapped in any process,
+     * but shall not result in termination of the program or security breaches
+     * (allowing a process to get access to another process' buffers).
+     * THIS FUNCTION TAKES OWNERSHIP of the buffer_handle_t which becomes
+     * invalid after the call. 
+     * 
+     * Returns 0 on success or -errno on error.
+     */
+    int (*free)(struct alloc_device_t* dev,
+            buffer_handle_t handle);
+
+    /* This hook is OPTIONAL.
+     *
+     * If non NULL it will be caused by SurfaceFlinger on dumpsys
+     */
+    void (*dump)(struct alloc_device_t *dev, char *buff, int buff_len);
+
+    void* reserved_proc[7];
+} alloc_device_t;
+
+
+/** convenience API for opening and closing a supported device */
+
+static inline int gralloc_open(const struct hw_module_t* module, 
+        struct alloc_device_t** device) {
+    return module->methods->open(module, 
+            GRALLOC_HARDWARE_GPU0, (struct hw_device_t**)device);
+}
+
+static inline int gralloc_close(struct alloc_device_t* device) {
+    return device->common.close(&device->common);
+}
+
+__END_DECLS
+
+#endif  // ANDROID_GRALLOC_INTERFACE_H