Baseline of hwcplus package taken from KitKat AOSP.

third_party/hwcplus/include/hardware/hardware.h

Index: third_party/hwcplus/include/hardware/hardware.h
diff --git a/third_party/hwcplus/include/hardware/hardware.h b/third_party/hwcplus/include/hardware/hardware.h
new file mode 100644
index 0000000000000000000000000000000000000000..416ae390527c9c3b191bf7ef1d5188bc6be88e6f
--- /dev/null
+++ b/third_party/hwcplus/include/hardware/hardware.h
@@ -0,0 +1,230 @@
+/*
+ * Copyright (C) 2008 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_INCLUDE_HARDWARE_HARDWARE_H
+#define ANDROID_INCLUDE_HARDWARE_HARDWARE_H
+
+#include <stdint.h>
+#include <sys/cdefs.h>
+
+#include <cutils/native_handle.h>
+#include <system/graphics.h>
+
+__BEGIN_DECLS
+
+/*
+ * Value for the hw_module_t.tag field
+ */
+
+#define MAKE_TAG_CONSTANT(A,B,C,D) (((A) << 24) | ((B) << 16) | ((C) << 8) | (D))
+
+#define HARDWARE_MODULE_TAG MAKE_TAG_CONSTANT('H', 'W', 'M', 'T')
+#define HARDWARE_DEVICE_TAG MAKE_TAG_CONSTANT('H', 'W', 'D', 'T')
+
+#define HARDWARE_MAKE_API_VERSION(maj,min) \
+            ((((maj) & 0xff) << 8) | ((min) & 0xff))
+
+#define HARDWARE_MAKE_API_VERSION_2(maj,min,hdr) \
+            ((((maj) & 0xff) << 24) | (((min) & 0xff) << 16) | ((hdr) & 0xffff))
+#define HARDWARE_API_VERSION_2_MAJ_MIN_MASK 0xffff0000
+#define HARDWARE_API_VERSION_2_HEADER_MASK  0x0000ffff
+
+
+/*
+ * The current HAL API version.
+ *
+ * All module implementations must set the hw_module_t.hal_api_version field
+ * to this value when declaring the module with HAL_MODULE_INFO_SYM.
+ *
+ * Note that previous implementations have always set this field to 0.
+ * Therefore, libhardware HAL API will always consider versions 0.0 and 1.0
+ * to be 100% binary compatible.
+ *
+ */
+#define HARDWARE_HAL_API_VERSION HARDWARE_MAKE_API_VERSION(1, 0)
+
+/*
+ * Helper macros for module implementors.
+ *
+ * The derived modules should provide convenience macros for supported
+ * versions so that implementations can explicitly specify module/device
+ * versions at definition time.
+ *
+ * Use this macro to set the hw_module_t.module_api_version field.
+ */
+#define HARDWARE_MODULE_API_VERSION(maj,min) HARDWARE_MAKE_API_VERSION(maj,min)
+#define HARDWARE_MODULE_API_VERSION_2(maj,min,hdr) HARDWARE_MAKE_API_VERSION_2(maj,min,hdr)
+
+/*
+ * Use this macro to set the hw_device_t.version field
+ */
+#define HARDWARE_DEVICE_API_VERSION(maj,min) HARDWARE_MAKE_API_VERSION(maj,min)
+#define HARDWARE_DEVICE_API_VERSION_2(maj,min,hdr) HARDWARE_MAKE_API_VERSION_2(maj,min,hdr)
+
+struct hw_module_t;
+struct hw_module_methods_t;
+struct hw_device_t;
+
+/**
+ * Every hardware module must have a data structure named HAL_MODULE_INFO_SYM
+ * and the fields of this data structure must begin with hw_module_t
+ * followed by module specific information.
+ */
+typedef struct hw_module_t {
+    /** tag must be initialized to HARDWARE_MODULE_TAG */
+    uint32_t tag;
+
+    /**
+     * The API version of the implemented module. The module owner is
+     * responsible for updating the version when a module interface has
+     * changed.
+     *
+     * The derived modules such as gralloc and audio own and manage this field.
+     * The module user must interpret the version field to decide whether or
+     * not to inter-operate with the supplied module implementation.
+     * For example, SurfaceFlinger is responsible for making sure that
+     * it knows how to manage different versions of the gralloc-module API,
+     * and AudioFlinger must know how to do the same for audio-module API.
+     *
+     * The module API version should include a major and a minor component.
+     * For example, version 1.0 could be represented as 0x0100. This format
+     * implies that versions 0x0100-0x01ff are all API-compatible.
+     *
+     * In the future, libhardware will expose a hw_get_module_version()
+     * (or equivalent) function that will take minimum/maximum supported
+     * versions as arguments and would be able to reject modules with
+     * versions outside of the supplied range.
+     */
+    uint16_t module_api_version;
+#define version_major module_api_version
+    /**
+     * version_major/version_minor defines are supplied here for temporary
+     * source code compatibility. They will be removed in the next version.
+     * ALL clients must convert to the new version format.
+     */
+
+    /**
+     * The API version of the HAL module interface. This is meant to
+     * version the hw_module_t, hw_module_methods_t, and hw_device_t
+     * structures and definitions.
+     *
+     * The HAL interface owns this field. Module users/implementations
+     * must NOT rely on this value for version information.
+     *
+     * Presently, 0 is the only valid value.
+     */
+    uint16_t hal_api_version;
+#define version_minor hal_api_version
+
+    /** Identifier of module */
+    const char *id;
+
+    /** Name of this module */
+    const char *name;
+
+    /** Author/owner/implementor of the module */
+    const char *author;
+
+    /** Modules methods */
+    struct hw_module_methods_t* methods;
+
+    /** module's dso */
+    void* dso;
+
+    /** padding to 128 bytes, reserved for future use */
+    uint32_t reserved[32-7];
+
+} hw_module_t;
+
+typedef struct hw_module_methods_t {
+    /** Open a specific device */
+    int (*open)(const struct hw_module_t* module, const char* id,
+            struct hw_device_t** device);
+
+} hw_module_methods_t;
+
+/**
+ * Every device data structure must begin with hw_device_t
+ * followed by module specific public methods and attributes.
+ */
+typedef struct hw_device_t {
+    /** tag must be initialized to HARDWARE_DEVICE_TAG */
+    uint32_t tag;
+
+    /**
+     * Version of the module-specific device API. This value is used by
+     * the derived-module user to manage different device implementations.
+     *
+     * The module user is responsible for checking the module_api_version
+     * and device version fields to ensure that the user is capable of
+     * communicating with the specific module implementation.
+     *
+     * One module can support multiple devices with different versions. This
+     * can be useful when a device interface changes in an incompatible way
+     * but it is still necessary to support older implementations at the same
+     * time. One such example is the Camera 2.0 API.
+     *
+     * This field is interpreted by the module user and is ignored by the
+     * HAL interface itself.
+     */
+    uint32_t version;
+
+    /** reference to the module this device belongs to */
+    struct hw_module_t* module;
+
+    /** padding reserved for future use */
+    uint32_t reserved[12];
+
+    /** Close this device */
+    int (*close)(struct hw_device_t* device);
+
+} hw_device_t;
+
+/**
+ * Name of the hal_module_info
+ */
+#define HAL_MODULE_INFO_SYM         HMI
+
+/**
+ * Name of the hal_module_info as a string
+ */
+#define HAL_MODULE_INFO_SYM_AS_STR  "HMI"
+
+/**
+ * Get the module info associated with a module by id.
+ *
+ * @return: 0 == success, <0 == error and *module == NULL
+ */
+int hw_get_module(const char *id, const struct hw_module_t **module);
+
+/**
+ * Get the module info associated with a module instance by class 'class_id'
+ * and instance 'inst'.
+ *
+ * Some modules types necessitate multiple instances. For example audio supports
+ * multiple concurrent interfaces and thus 'audio' is the module class
+ * and 'primary' or 'a2dp' are module interfaces. This implies that the files
+ * providing these modules would be named audio.primary.<variant>.so and
+ * audio.a2dp.<variant>.so
+ *
+ * @return: 0 == success, <0 == error and *module == NULL
+ */
+int hw_get_module_by_class(const char *class_id, const char *inst,
+                           const struct hw_module_t **module);
+
+__END_DECLS
+
+#endif  /* ANDROID_INCLUDE_HARDWARE_HARDWARE_H */