Index: src/arm/ic-arm.cc |
=================================================================== |
--- src/arm/ic-arm.cc (revision 6406) |
+++ src/arm/ic-arm.cc (working copy) |
@@ -1337,311 +1337,6 @@ |
} |
-// Convert unsigned integer with specified number of leading zeroes in binary |
-// representation to IEEE 754 double. |
-// Integer to convert is passed in register hiword. |
-// Resulting double is returned in registers hiword:loword. |
-// This functions does not work correctly for 0. |
-static void GenerateUInt2Double(MacroAssembler* masm, |
- Register hiword, |
- Register loword, |
- Register scratch, |
- int leading_zeroes) { |
- const int meaningful_bits = kBitsPerInt - leading_zeroes - 1; |
- const int biased_exponent = HeapNumber::kExponentBias + meaningful_bits; |
- |
- const int mantissa_shift_for_hi_word = |
- meaningful_bits - HeapNumber::kMantissaBitsInTopWord; |
- |
- const int mantissa_shift_for_lo_word = |
- kBitsPerInt - mantissa_shift_for_hi_word; |
- |
- __ mov(scratch, Operand(biased_exponent << HeapNumber::kExponentShift)); |
- if (mantissa_shift_for_hi_word > 0) { |
- __ mov(loword, Operand(hiword, LSL, mantissa_shift_for_lo_word)); |
- __ orr(hiword, scratch, Operand(hiword, LSR, mantissa_shift_for_hi_word)); |
- } else { |
- __ mov(loword, Operand(0, RelocInfo::NONE)); |
- __ orr(hiword, scratch, Operand(hiword, LSL, mantissa_shift_for_hi_word)); |
- } |
- |
- // If least significant bit of biased exponent was not 1 it was corrupted |
- // by most significant bit of mantissa so we should fix that. |
- if (!(biased_exponent & 1)) { |
- __ bic(hiword, hiword, Operand(1 << HeapNumber::kExponentShift)); |
- } |
-} |
- |
- |
-void KeyedLoadIC::GenerateExternalArray(MacroAssembler* masm, |
- ExternalArrayType array_type) { |
- // ---------- S t a t e -------------- |
- // -- lr : return address |
- // -- r0 : key |
- // -- r1 : receiver |
- // ----------------------------------- |
- Label slow, failed_allocation; |
- |
- Register key = r0; |
- Register receiver = r1; |
- |
- // Check that the object isn't a smi |
- __ BranchOnSmi(receiver, &slow); |
- |
- // Check that the key is a smi. |
- __ BranchOnNotSmi(key, &slow); |
- |
- // Check that the object is a JS object. Load map into r2. |
- __ CompareObjectType(receiver, r2, r3, FIRST_JS_OBJECT_TYPE); |
- __ b(lt, &slow); |
- |
- // Check that the receiver does not require access checks. We need |
- // to check this explicitly since this generic stub does not perform |
- // map checks. |
- __ ldrb(r3, FieldMemOperand(r2, Map::kBitFieldOffset)); |
- __ tst(r3, Operand(1 << Map::kIsAccessCheckNeeded)); |
- __ b(ne, &slow); |
- |
- // Check that the elements array is the appropriate type of |
- // ExternalArray. |
- __ ldr(r3, FieldMemOperand(receiver, JSObject::kElementsOffset)); |
- __ ldr(r2, FieldMemOperand(r3, HeapObject::kMapOffset)); |
- __ LoadRoot(ip, Heap::RootIndexForExternalArrayType(array_type)); |
- __ cmp(r2, ip); |
- __ b(ne, &slow); |
- |
- // Check that the index is in range. |
- __ ldr(ip, FieldMemOperand(r3, ExternalArray::kLengthOffset)); |
- __ cmp(ip, Operand(key, ASR, kSmiTagSize)); |
- // Unsigned comparison catches both negative and too-large values. |
- __ b(lo, &slow); |
- |
- // r3: elements array |
- __ ldr(r3, FieldMemOperand(r3, ExternalArray::kExternalPointerOffset)); |
- // r3: base pointer of external storage |
- |
- // We are not untagging smi key and instead work with it |
- // as if it was premultiplied by 2. |
- ASSERT((kSmiTag == 0) && (kSmiTagSize == 1)); |
- |
- Register value = r2; |
- switch (array_type) { |
- case kExternalByteArray: |
- __ ldrsb(value, MemOperand(r3, key, LSR, 1)); |
- break; |
- case kExternalUnsignedByteArray: |
- __ ldrb(value, MemOperand(r3, key, LSR, 1)); |
- break; |
- case kExternalShortArray: |
- __ ldrsh(value, MemOperand(r3, key, LSL, 0)); |
- break; |
- case kExternalUnsignedShortArray: |
- __ ldrh(value, MemOperand(r3, key, LSL, 0)); |
- break; |
- case kExternalIntArray: |
- case kExternalUnsignedIntArray: |
- __ ldr(value, MemOperand(r3, key, LSL, 1)); |
- break; |
- case kExternalFloatArray: |
- if (CpuFeatures::IsSupported(VFP3)) { |
- CpuFeatures::Scope scope(VFP3); |
- __ add(r2, r3, Operand(key, LSL, 1)); |
- __ vldr(s0, r2, 0); |
- } else { |
- __ ldr(value, MemOperand(r3, key, LSL, 1)); |
- } |
- break; |
- default: |
- UNREACHABLE(); |
- break; |
- } |
- |
- // For integer array types: |
- // r2: value |
- // For floating-point array type |
- // s0: value (if VFP3 is supported) |
- // r2: value (if VFP3 is not supported) |
- |
- if (array_type == kExternalIntArray) { |
- // For the Int and UnsignedInt array types, we need to see whether |
- // the value can be represented in a Smi. If not, we need to convert |
- // it to a HeapNumber. |
- Label box_int; |
- __ cmp(value, Operand(0xC0000000)); |
- __ b(mi, &box_int); |
- // Tag integer as smi and return it. |
- __ mov(r0, Operand(value, LSL, kSmiTagSize)); |
- __ Ret(); |
- |
- __ bind(&box_int); |
- // Allocate a HeapNumber for the result and perform int-to-double |
- // conversion. Don't touch r0 or r1 as they are needed if allocation |
- // fails. |
- __ LoadRoot(r6, Heap::kHeapNumberMapRootIndex); |
- __ AllocateHeapNumber(r5, r3, r4, r6, &slow); |
- // Now we can use r0 for the result as key is not needed any more. |
- __ mov(r0, r5); |
- |
- if (CpuFeatures::IsSupported(VFP3)) { |
- CpuFeatures::Scope scope(VFP3); |
- __ vmov(s0, value); |
- __ vcvt_f64_s32(d0, s0); |
- __ sub(r3, r0, Operand(kHeapObjectTag)); |
- __ vstr(d0, r3, HeapNumber::kValueOffset); |
- __ Ret(); |
- } else { |
- WriteInt32ToHeapNumberStub stub(value, r0, r3); |
- __ TailCallStub(&stub); |
- } |
- } else if (array_type == kExternalUnsignedIntArray) { |
- // The test is different for unsigned int values. Since we need |
- // the value to be in the range of a positive smi, we can't |
- // handle either of the top two bits being set in the value. |
- if (CpuFeatures::IsSupported(VFP3)) { |
- CpuFeatures::Scope scope(VFP3); |
- Label box_int, done; |
- __ tst(value, Operand(0xC0000000)); |
- __ b(ne, &box_int); |
- // Tag integer as smi and return it. |
- __ mov(r0, Operand(value, LSL, kSmiTagSize)); |
- __ Ret(); |
- |
- __ bind(&box_int); |
- __ vmov(s0, value); |
- // Allocate a HeapNumber for the result and perform int-to-double |
- // conversion. Don't use r0 and r1 as AllocateHeapNumber clobbers all |
- // registers - also when jumping due to exhausted young space. |
- __ LoadRoot(r6, Heap::kHeapNumberMapRootIndex); |
- __ AllocateHeapNumber(r2, r3, r4, r6, &slow); |
- |
- __ vcvt_f64_u32(d0, s0); |
- __ sub(r1, r2, Operand(kHeapObjectTag)); |
- __ vstr(d0, r1, HeapNumber::kValueOffset); |
- |
- __ mov(r0, r2); |
- __ Ret(); |
- } else { |
- // Check whether unsigned integer fits into smi. |
- Label box_int_0, box_int_1, done; |
- __ tst(value, Operand(0x80000000)); |
- __ b(ne, &box_int_0); |
- __ tst(value, Operand(0x40000000)); |
- __ b(ne, &box_int_1); |
- // Tag integer as smi and return it. |
- __ mov(r0, Operand(value, LSL, kSmiTagSize)); |
- __ Ret(); |
- |
- Register hiword = value; // r2. |
- Register loword = r3; |
- |
- __ bind(&box_int_0); |
- // Integer does not have leading zeros. |
- GenerateUInt2Double(masm, hiword, loword, r4, 0); |
- __ b(&done); |
- |
- __ bind(&box_int_1); |
- // Integer has one leading zero. |
- GenerateUInt2Double(masm, hiword, loword, r4, 1); |
- |
- |
- __ bind(&done); |
- // Integer was converted to double in registers hiword:loword. |
- // Wrap it into a HeapNumber. Don't use r0 and r1 as AllocateHeapNumber |
- // clobbers all registers - also when jumping due to exhausted young |
- // space. |
- __ LoadRoot(r6, Heap::kHeapNumberMapRootIndex); |
- __ AllocateHeapNumber(r4, r5, r7, r6, &slow); |
- |
- __ str(hiword, FieldMemOperand(r4, HeapNumber::kExponentOffset)); |
- __ str(loword, FieldMemOperand(r4, HeapNumber::kMantissaOffset)); |
- |
- __ mov(r0, r4); |
- __ Ret(); |
- } |
- } else if (array_type == kExternalFloatArray) { |
- // For the floating-point array type, we need to always allocate a |
- // HeapNumber. |
- if (CpuFeatures::IsSupported(VFP3)) { |
- CpuFeatures::Scope scope(VFP3); |
- // Allocate a HeapNumber for the result. Don't use r0 and r1 as |
- // AllocateHeapNumber clobbers all registers - also when jumping due to |
- // exhausted young space. |
- __ LoadRoot(r6, Heap::kHeapNumberMapRootIndex); |
- __ AllocateHeapNumber(r2, r3, r4, r6, &slow); |
- __ vcvt_f64_f32(d0, s0); |
- __ sub(r1, r2, Operand(kHeapObjectTag)); |
- __ vstr(d0, r1, HeapNumber::kValueOffset); |
- |
- __ mov(r0, r2); |
- __ Ret(); |
- } else { |
- // Allocate a HeapNumber for the result. Don't use r0 and r1 as |
- // AllocateHeapNumber clobbers all registers - also when jumping due to |
- // exhausted young space. |
- __ LoadRoot(r6, Heap::kHeapNumberMapRootIndex); |
- __ AllocateHeapNumber(r3, r4, r5, r6, &slow); |
- // VFP is not available, do manual single to double conversion. |
- |
- // r2: floating point value (binary32) |
- // r3: heap number for result |
- |
- // Extract mantissa to r0. OK to clobber r0 now as there are no jumps to |
- // the slow case from here. |
- __ and_(r0, value, Operand(kBinary32MantissaMask)); |
- |
- // Extract exponent to r1. OK to clobber r1 now as there are no jumps to |
- // the slow case from here. |
- __ mov(r1, Operand(value, LSR, kBinary32MantissaBits)); |
- __ and_(r1, r1, Operand(kBinary32ExponentMask >> kBinary32MantissaBits)); |
- |
- Label exponent_rebiased; |
- __ teq(r1, Operand(0x00, RelocInfo::NONE)); |
- __ b(eq, &exponent_rebiased); |
- |
- __ teq(r1, Operand(0xff)); |
- __ mov(r1, Operand(0x7ff), LeaveCC, eq); |
- __ b(eq, &exponent_rebiased); |
- |
- // Rebias exponent. |
- __ add(r1, |
- r1, |
- Operand(-kBinary32ExponentBias + HeapNumber::kExponentBias)); |
- |
- __ bind(&exponent_rebiased); |
- __ and_(r2, value, Operand(kBinary32SignMask)); |
- value = no_reg; |
- __ orr(r2, r2, Operand(r1, LSL, HeapNumber::kMantissaBitsInTopWord)); |
- |
- // Shift mantissa. |
- static const int kMantissaShiftForHiWord = |
- kBinary32MantissaBits - HeapNumber::kMantissaBitsInTopWord; |
- |
- static const int kMantissaShiftForLoWord = |
- kBitsPerInt - kMantissaShiftForHiWord; |
- |
- __ orr(r2, r2, Operand(r0, LSR, kMantissaShiftForHiWord)); |
- __ mov(r0, Operand(r0, LSL, kMantissaShiftForLoWord)); |
- |
- __ str(r2, FieldMemOperand(r3, HeapNumber::kExponentOffset)); |
- __ str(r0, FieldMemOperand(r3, HeapNumber::kMantissaOffset)); |
- |
- __ mov(r0, r3); |
- __ Ret(); |
- } |
- |
- } else { |
- // Tag integer as smi and return it. |
- __ mov(r0, Operand(value, LSL, kSmiTagSize)); |
- __ Ret(); |
- } |
- |
- // Slow case, key and receiver still in r0 and r1. |
- __ bind(&slow); |
- __ IncrementCounter(&Counters::keyed_load_external_array_slow, 1, r2, r3); |
- GenerateRuntimeGetProperty(masm); |
-} |
- |
- |
void KeyedLoadIC::GenerateIndexedInterceptor(MacroAssembler* masm) { |
// ---------- S t a t e -------------- |
// -- lr : return address |
@@ -1838,384 +1533,6 @@ |
} |
-// Convert and store int passed in register ival to IEEE 754 single precision |
-// floating point value at memory location (dst + 4 * wordoffset) |
-// If VFP3 is available use it for conversion. |
-static void StoreIntAsFloat(MacroAssembler* masm, |
- Register dst, |
- Register wordoffset, |
- Register ival, |
- Register fval, |
- Register scratch1, |
- Register scratch2) { |
- if (CpuFeatures::IsSupported(VFP3)) { |
- CpuFeatures::Scope scope(VFP3); |
- __ vmov(s0, ival); |
- __ add(scratch1, dst, Operand(wordoffset, LSL, 2)); |
- __ vcvt_f32_s32(s0, s0); |
- __ vstr(s0, scratch1, 0); |
- } else { |
- Label not_special, done; |
- // Move sign bit from source to destination. This works because the sign |
- // bit in the exponent word of the double has the same position and polarity |
- // as the 2's complement sign bit in a Smi. |
- ASSERT(kBinary32SignMask == 0x80000000u); |
- |
- __ and_(fval, ival, Operand(kBinary32SignMask), SetCC); |
- // Negate value if it is negative. |
- __ rsb(ival, ival, Operand(0, RelocInfo::NONE), LeaveCC, ne); |
- |
- // We have -1, 0 or 1, which we treat specially. Register ival contains |
- // absolute value: it is either equal to 1 (special case of -1 and 1), |
- // greater than 1 (not a special case) or less than 1 (special case of 0). |
- __ cmp(ival, Operand(1)); |
- __ b(gt, ¬_special); |
- |
- // For 1 or -1 we need to or in the 0 exponent (biased). |
- static const uint32_t exponent_word_for_1 = |
- kBinary32ExponentBias << kBinary32ExponentShift; |
- |
- __ orr(fval, fval, Operand(exponent_word_for_1), LeaveCC, eq); |
- __ b(&done); |
- |
- __ bind(¬_special); |
- // Count leading zeros. |
- // Gets the wrong answer for 0, but we already checked for that case above. |
- Register zeros = scratch2; |
- __ CountLeadingZeros(zeros, ival, scratch1); |
- |
- // Compute exponent and or it into the exponent register. |
- __ rsb(scratch1, |
- zeros, |
- Operand((kBitsPerInt - 1) + kBinary32ExponentBias)); |
- |
- __ orr(fval, |
- fval, |
- Operand(scratch1, LSL, kBinary32ExponentShift)); |
- |
- // Shift up the source chopping the top bit off. |
- __ add(zeros, zeros, Operand(1)); |
- // This wouldn't work for 1 and -1 as the shift would be 32 which means 0. |
- __ mov(ival, Operand(ival, LSL, zeros)); |
- // And the top (top 20 bits). |
- __ orr(fval, |
- fval, |
- Operand(ival, LSR, kBitsPerInt - kBinary32MantissaBits)); |
- |
- __ bind(&done); |
- __ str(fval, MemOperand(dst, wordoffset, LSL, 2)); |
- } |
-} |
- |
- |
-static bool IsElementTypeSigned(ExternalArrayType array_type) { |
- switch (array_type) { |
- case kExternalByteArray: |
- case kExternalShortArray: |
- case kExternalIntArray: |
- return true; |
- |
- case kExternalUnsignedByteArray: |
- case kExternalUnsignedShortArray: |
- case kExternalUnsignedIntArray: |
- return false; |
- |
- default: |
- UNREACHABLE(); |
- return false; |
- } |
-} |
- |
- |
-void KeyedStoreIC::GenerateExternalArray(MacroAssembler* masm, |
- ExternalArrayType array_type) { |
- // ---------- S t a t e -------------- |
- // -- r0 : value |
- // -- r1 : key |
- // -- r2 : receiver |
- // -- lr : return address |
- // ----------------------------------- |
- Label slow, check_heap_number; |
- |
- // Register usage. |
- Register value = r0; |
- Register key = r1; |
- Register receiver = r2; |
- // r3 mostly holds the elements array or the destination external array. |
- |
- // Check that the object isn't a smi. |
- __ BranchOnSmi(receiver, &slow); |
- |
- // Check that the object is a JS object. Load map into r3. |
- __ CompareObjectType(receiver, r3, r4, FIRST_JS_OBJECT_TYPE); |
- __ b(le, &slow); |
- |
- // Check that the receiver does not require access checks. We need |
- // to do this because this generic stub does not perform map checks. |
- __ ldrb(ip, FieldMemOperand(r3, Map::kBitFieldOffset)); |
- __ tst(ip, Operand(1 << Map::kIsAccessCheckNeeded)); |
- __ b(ne, &slow); |
- |
- // Check that the key is a smi. |
- __ BranchOnNotSmi(key, &slow); |
- |
- // Check that the elements array is the appropriate type of ExternalArray. |
- __ ldr(r3, FieldMemOperand(receiver, JSObject::kElementsOffset)); |
- __ ldr(r4, FieldMemOperand(r3, HeapObject::kMapOffset)); |
- __ LoadRoot(ip, Heap::RootIndexForExternalArrayType(array_type)); |
- __ cmp(r4, ip); |
- __ b(ne, &slow); |
- |
- // Check that the index is in range. |
- __ mov(r4, Operand(key, ASR, kSmiTagSize)); // Untag the index. |
- __ ldr(ip, FieldMemOperand(r3, ExternalArray::kLengthOffset)); |
- __ cmp(r4, ip); |
- // Unsigned comparison catches both negative and too-large values. |
- __ b(hs, &slow); |
- |
- // Handle both smis and HeapNumbers in the fast path. Go to the |
- // runtime for all other kinds of values. |
- // r3: external array. |
- // r4: key (integer). |
- __ BranchOnNotSmi(value, &check_heap_number); |
- __ mov(r5, Operand(value, ASR, kSmiTagSize)); // Untag the value. |
- __ ldr(r3, FieldMemOperand(r3, ExternalArray::kExternalPointerOffset)); |
- |
- // r3: base pointer of external storage. |
- // r4: key (integer). |
- // r5: value (integer). |
- switch (array_type) { |
- case kExternalByteArray: |
- case kExternalUnsignedByteArray: |
- __ strb(r5, MemOperand(r3, r4, LSL, 0)); |
- break; |
- case kExternalShortArray: |
- case kExternalUnsignedShortArray: |
- __ strh(r5, MemOperand(r3, r4, LSL, 1)); |
- break; |
- case kExternalIntArray: |
- case kExternalUnsignedIntArray: |
- __ str(r5, MemOperand(r3, r4, LSL, 2)); |
- break; |
- case kExternalFloatArray: |
- // Perform int-to-float conversion and store to memory. |
- StoreIntAsFloat(masm, r3, r4, r5, r6, r7, r9); |
- break; |
- default: |
- UNREACHABLE(); |
- break; |
- } |
- |
- // Entry registers are intact, r0 holds the value which is the return value. |
- __ Ret(); |
- |
- |
- // r3: external array. |
- // r4: index (integer). |
- __ bind(&check_heap_number); |
- __ CompareObjectType(value, r5, r6, HEAP_NUMBER_TYPE); |
- __ b(ne, &slow); |
- |
- __ ldr(r3, FieldMemOperand(r3, ExternalArray::kExternalPointerOffset)); |
- |
- // r3: base pointer of external storage. |
- // r4: key (integer). |
- |
- // The WebGL specification leaves the behavior of storing NaN and |
- // +/-Infinity into integer arrays basically undefined. For more |
- // reproducible behavior, convert these to zero. |
- if (CpuFeatures::IsSupported(VFP3)) { |
- CpuFeatures::Scope scope(VFP3); |
- |
- |
- if (array_type == kExternalFloatArray) { |
- // vldr requires offset to be a multiple of 4 so we can not |
- // include -kHeapObjectTag into it. |
- __ sub(r5, r0, Operand(kHeapObjectTag)); |
- __ vldr(d0, r5, HeapNumber::kValueOffset); |
- __ add(r5, r3, Operand(r4, LSL, 2)); |
- __ vcvt_f32_f64(s0, d0); |
- __ vstr(s0, r5, 0); |
- } else { |
- // Need to perform float-to-int conversion. |
- // Test for NaN or infinity (both give zero). |
- __ ldr(r6, FieldMemOperand(r5, HeapNumber::kExponentOffset)); |
- |
- // Hoisted load. vldr requires offset to be a multiple of 4 so we can not |
- // include -kHeapObjectTag into it. |
- __ sub(r5, r0, Operand(kHeapObjectTag)); |
- __ vldr(d0, r5, HeapNumber::kValueOffset); |
- |
- __ Sbfx(r6, r6, HeapNumber::kExponentShift, HeapNumber::kExponentBits); |
- // NaNs and Infinities have all-one exponents so they sign extend to -1. |
- __ cmp(r6, Operand(-1)); |
- __ mov(r5, Operand(Smi::FromInt(0)), LeaveCC, eq); |
- |
- // Not infinity or NaN simply convert to int. |
- if (IsElementTypeSigned(array_type)) { |
- __ vcvt_s32_f64(s0, d0, Assembler::RoundToZero, ne); |
- } else { |
- __ vcvt_u32_f64(s0, d0, Assembler::RoundToZero, ne); |
- } |
- __ vmov(r5, s0, ne); |
- |
- switch (array_type) { |
- case kExternalByteArray: |
- case kExternalUnsignedByteArray: |
- __ strb(r5, MemOperand(r3, r4, LSL, 0)); |
- break; |
- case kExternalShortArray: |
- case kExternalUnsignedShortArray: |
- __ strh(r5, MemOperand(r3, r4, LSL, 1)); |
- break; |
- case kExternalIntArray: |
- case kExternalUnsignedIntArray: |
- __ str(r5, MemOperand(r3, r4, LSL, 2)); |
- break; |
- default: |
- UNREACHABLE(); |
- break; |
- } |
- } |
- |
- // Entry registers are intact, r0 holds the value which is the return value. |
- __ Ret(); |
- } else { |
- // VFP3 is not available do manual conversions. |
- __ ldr(r5, FieldMemOperand(value, HeapNumber::kExponentOffset)); |
- __ ldr(r6, FieldMemOperand(value, HeapNumber::kMantissaOffset)); |
- |
- if (array_type == kExternalFloatArray) { |
- Label done, nan_or_infinity_or_zero; |
- static const int kMantissaInHiWordShift = |
- kBinary32MantissaBits - HeapNumber::kMantissaBitsInTopWord; |
- |
- static const int kMantissaInLoWordShift = |
- kBitsPerInt - kMantissaInHiWordShift; |
- |
- // Test for all special exponent values: zeros, subnormal numbers, NaNs |
- // and infinities. All these should be converted to 0. |
- __ mov(r7, Operand(HeapNumber::kExponentMask)); |
- __ and_(r9, r5, Operand(r7), SetCC); |
- __ b(eq, &nan_or_infinity_or_zero); |
- |
- __ teq(r9, Operand(r7)); |
- __ mov(r9, Operand(kBinary32ExponentMask), LeaveCC, eq); |
- __ b(eq, &nan_or_infinity_or_zero); |
- |
- // Rebias exponent. |
- __ mov(r9, Operand(r9, LSR, HeapNumber::kExponentShift)); |
- __ add(r9, |
- r9, |
- Operand(kBinary32ExponentBias - HeapNumber::kExponentBias)); |
- |
- __ cmp(r9, Operand(kBinary32MaxExponent)); |
- __ and_(r5, r5, Operand(HeapNumber::kSignMask), LeaveCC, gt); |
- __ orr(r5, r5, Operand(kBinary32ExponentMask), LeaveCC, gt); |
- __ b(gt, &done); |
- |
- __ cmp(r9, Operand(kBinary32MinExponent)); |
- __ and_(r5, r5, Operand(HeapNumber::kSignMask), LeaveCC, lt); |
- __ b(lt, &done); |
- |
- __ and_(r7, r5, Operand(HeapNumber::kSignMask)); |
- __ and_(r5, r5, Operand(HeapNumber::kMantissaMask)); |
- __ orr(r7, r7, Operand(r5, LSL, kMantissaInHiWordShift)); |
- __ orr(r7, r7, Operand(r6, LSR, kMantissaInLoWordShift)); |
- __ orr(r5, r7, Operand(r9, LSL, kBinary32ExponentShift)); |
- |
- __ bind(&done); |
- __ str(r5, MemOperand(r3, r4, LSL, 2)); |
- // Entry registers are intact, r0 holds the value which is the return |
- // value. |
- __ Ret(); |
- |
- __ bind(&nan_or_infinity_or_zero); |
- __ and_(r7, r5, Operand(HeapNumber::kSignMask)); |
- __ and_(r5, r5, Operand(HeapNumber::kMantissaMask)); |
- __ orr(r9, r9, r7); |
- __ orr(r9, r9, Operand(r5, LSL, kMantissaInHiWordShift)); |
- __ orr(r5, r9, Operand(r6, LSR, kMantissaInLoWordShift)); |
- __ b(&done); |
- } else { |
- bool is_signed_type = IsElementTypeSigned(array_type); |
- int meaningfull_bits = is_signed_type ? (kBitsPerInt - 1) : kBitsPerInt; |
- int32_t min_value = is_signed_type ? 0x80000000 : 0x00000000; |
- |
- Label done, sign; |
- |
- // Test for all special exponent values: zeros, subnormal numbers, NaNs |
- // and infinities. All these should be converted to 0. |
- __ mov(r7, Operand(HeapNumber::kExponentMask)); |
- __ and_(r9, r5, Operand(r7), SetCC); |
- __ mov(r5, Operand(0, RelocInfo::NONE), LeaveCC, eq); |
- __ b(eq, &done); |
- |
- __ teq(r9, Operand(r7)); |
- __ mov(r5, Operand(0, RelocInfo::NONE), LeaveCC, eq); |
- __ b(eq, &done); |
- |
- // Unbias exponent. |
- __ mov(r9, Operand(r9, LSR, HeapNumber::kExponentShift)); |
- __ sub(r9, r9, Operand(HeapNumber::kExponentBias), SetCC); |
- // If exponent is negative than result is 0. |
- __ mov(r5, Operand(0, RelocInfo::NONE), LeaveCC, mi); |
- __ b(mi, &done); |
- |
- // If exponent is too big than result is minimal value. |
- __ cmp(r9, Operand(meaningfull_bits - 1)); |
- __ mov(r5, Operand(min_value), LeaveCC, ge); |
- __ b(ge, &done); |
- |
- __ and_(r7, r5, Operand(HeapNumber::kSignMask), SetCC); |
- __ and_(r5, r5, Operand(HeapNumber::kMantissaMask)); |
- __ orr(r5, r5, Operand(1u << HeapNumber::kMantissaBitsInTopWord)); |
- |
- __ rsb(r9, r9, Operand(HeapNumber::kMantissaBitsInTopWord), SetCC); |
- __ mov(r5, Operand(r5, LSR, r9), LeaveCC, pl); |
- __ b(pl, &sign); |
- |
- __ rsb(r9, r9, Operand(0, RelocInfo::NONE)); |
- __ mov(r5, Operand(r5, LSL, r9)); |
- __ rsb(r9, r9, Operand(meaningfull_bits)); |
- __ orr(r5, r5, Operand(r6, LSR, r9)); |
- |
- __ bind(&sign); |
- __ teq(r7, Operand(0, RelocInfo::NONE)); |
- __ rsb(r5, r5, Operand(0, RelocInfo::NONE), LeaveCC, ne); |
- |
- __ bind(&done); |
- switch (array_type) { |
- case kExternalByteArray: |
- case kExternalUnsignedByteArray: |
- __ strb(r5, MemOperand(r3, r4, LSL, 0)); |
- break; |
- case kExternalShortArray: |
- case kExternalUnsignedShortArray: |
- __ strh(r5, MemOperand(r3, r4, LSL, 1)); |
- break; |
- case kExternalIntArray: |
- case kExternalUnsignedIntArray: |
- __ str(r5, MemOperand(r3, r4, LSL, 2)); |
- break; |
- default: |
- UNREACHABLE(); |
- break; |
- } |
- } |
- } |
- |
- // Slow case: call runtime. |
- __ bind(&slow); |
- |
- // Entry registers are intact. |
- // r0: value |
- // r1: key |
- // r2: receiver |
- GenerateRuntimeSetProperty(masm); |
-} |
- |
- |
void StoreIC::GenerateMegamorphic(MacroAssembler* masm) { |
// ----------- S t a t e ------------- |
// -- r0 : value |