Index: third_party/sqlite/src/src/pcache.c |
diff --git a/third_party/sqlite/src/src/pcache.c b/third_party/sqlite/src/src/pcache.c |
index 242f3071d90ae2fec8c16b9f97ea93c8bbd4aae3..191a9d00f41ded328642e71fa5da12138f38bc35 100644 |
--- a/third_party/sqlite/src/src/pcache.c |
+++ b/third_party/sqlite/src/src/pcache.c |
@@ -20,10 +20,11 @@ struct PCache { |
PgHdr *pDirty, *pDirtyTail; /* List of dirty pages in LRU order */ |
PgHdr *pSynced; /* Last synced page in dirty page list */ |
int nRef; /* Number of referenced pages */ |
- int nMax; /* Configured cache size */ |
+ int szCache; /* Configured cache size */ |
int szPage; /* Size of every page in this cache */ |
int szExtra; /* Size of extra space for each page */ |
- int bPurgeable; /* True if pages are on backing store */ |
+ u8 bPurgeable; /* True if pages are on backing store */ |
+ u8 eCreate; /* eCreate value for for xFetch() */ |
int (*xStress)(void*,PgHdr*); /* Call to try make a page clean */ |
void *pStress; /* Argument to xStress */ |
sqlite3_pcache *pCache; /* Pluggable cache module */ |
@@ -44,81 +45,71 @@ struct PCache { |
/********************************** Linked List Management ********************/ |
-#if !defined(NDEBUG) && defined(SQLITE_ENABLE_EXPENSIVE_ASSERT) |
-/* |
-** Check that the pCache->pSynced variable is set correctly. If it |
-** is not, either fail an assert or return zero. Otherwise, return |
-** non-zero. This is only used in debugging builds, as follows: |
-** |
-** expensive_assert( pcacheCheckSynced(pCache) ); |
-*/ |
-static int pcacheCheckSynced(PCache *pCache){ |
- PgHdr *p; |
- for(p=pCache->pDirtyTail; p!=pCache->pSynced; p=p->pDirtyPrev){ |
- assert( p->nRef || (p->flags&PGHDR_NEED_SYNC) ); |
- } |
- return (p==0 || p->nRef || (p->flags&PGHDR_NEED_SYNC)==0); |
-} |
-#endif /* !NDEBUG && SQLITE_ENABLE_EXPENSIVE_ASSERT */ |
+/* Allowed values for second argument to pcacheManageDirtyList() */ |
+#define PCACHE_DIRTYLIST_REMOVE 1 /* Remove pPage from dirty list */ |
+#define PCACHE_DIRTYLIST_ADD 2 /* Add pPage to the dirty list */ |
+#define PCACHE_DIRTYLIST_FRONT 3 /* Move pPage to the front of the list */ |
/* |
-** Remove page pPage from the list of dirty pages. |
+** Manage pPage's participation on the dirty list. Bits of the addRemove |
+** argument determines what operation to do. The 0x01 bit means first |
+** remove pPage from the dirty list. The 0x02 means add pPage back to |
+** the dirty list. Doing both moves pPage to the front of the dirty list. |
*/ |
-static void pcacheRemoveFromDirtyList(PgHdr *pPage){ |
+static void pcacheManageDirtyList(PgHdr *pPage, u8 addRemove){ |
PCache *p = pPage->pCache; |
- assert( pPage->pDirtyNext || pPage==p->pDirtyTail ); |
- assert( pPage->pDirtyPrev || pPage==p->pDirty ); |
- |
- /* Update the PCache1.pSynced variable if necessary. */ |
- if( p->pSynced==pPage ){ |
- PgHdr *pSynced = pPage->pDirtyPrev; |
- while( pSynced && (pSynced->flags&PGHDR_NEED_SYNC) ){ |
- pSynced = pSynced->pDirtyPrev; |
+ if( addRemove & PCACHE_DIRTYLIST_REMOVE ){ |
+ assert( pPage->pDirtyNext || pPage==p->pDirtyTail ); |
+ assert( pPage->pDirtyPrev || pPage==p->pDirty ); |
+ |
+ /* Update the PCache1.pSynced variable if necessary. */ |
+ if( p->pSynced==pPage ){ |
+ PgHdr *pSynced = pPage->pDirtyPrev; |
+ while( pSynced && (pSynced->flags&PGHDR_NEED_SYNC) ){ |
+ pSynced = pSynced->pDirtyPrev; |
+ } |
+ p->pSynced = pSynced; |
+ } |
+ |
+ if( pPage->pDirtyNext ){ |
+ pPage->pDirtyNext->pDirtyPrev = pPage->pDirtyPrev; |
+ }else{ |
+ assert( pPage==p->pDirtyTail ); |
+ p->pDirtyTail = pPage->pDirtyPrev; |
+ } |
+ if( pPage->pDirtyPrev ){ |
+ pPage->pDirtyPrev->pDirtyNext = pPage->pDirtyNext; |
+ }else{ |
+ assert( pPage==p->pDirty ); |
+ p->pDirty = pPage->pDirtyNext; |
+ if( p->pDirty==0 && p->bPurgeable ){ |
+ assert( p->eCreate==1 ); |
+ p->eCreate = 2; |
+ } |
+ } |
+ pPage->pDirtyNext = 0; |
+ pPage->pDirtyPrev = 0; |
+ } |
+ if( addRemove & PCACHE_DIRTYLIST_ADD ){ |
+ assert( pPage->pDirtyNext==0 && pPage->pDirtyPrev==0 && p->pDirty!=pPage ); |
+ |
+ pPage->pDirtyNext = p->pDirty; |
+ if( pPage->pDirtyNext ){ |
+ assert( pPage->pDirtyNext->pDirtyPrev==0 ); |
+ pPage->pDirtyNext->pDirtyPrev = pPage; |
+ }else{ |
+ p->pDirtyTail = pPage; |
+ if( p->bPurgeable ){ |
+ assert( p->eCreate==2 ); |
+ p->eCreate = 1; |
+ } |
+ } |
+ p->pDirty = pPage; |
+ if( !p->pSynced && 0==(pPage->flags&PGHDR_NEED_SYNC) ){ |
+ p->pSynced = pPage; |
} |
- p->pSynced = pSynced; |
- } |
- |
- if( pPage->pDirtyNext ){ |
- pPage->pDirtyNext->pDirtyPrev = pPage->pDirtyPrev; |
- }else{ |
- assert( pPage==p->pDirtyTail ); |
- p->pDirtyTail = pPage->pDirtyPrev; |
- } |
- if( pPage->pDirtyPrev ){ |
- pPage->pDirtyPrev->pDirtyNext = pPage->pDirtyNext; |
- }else{ |
- assert( pPage==p->pDirty ); |
- p->pDirty = pPage->pDirtyNext; |
- } |
- pPage->pDirtyNext = 0; |
- pPage->pDirtyPrev = 0; |
- |
- expensive_assert( pcacheCheckSynced(p) ); |
-} |
- |
-/* |
-** Add page pPage to the head of the dirty list (PCache1.pDirty is set to |
-** pPage). |
-*/ |
-static void pcacheAddToDirtyList(PgHdr *pPage){ |
- PCache *p = pPage->pCache; |
- |
- assert( pPage->pDirtyNext==0 && pPage->pDirtyPrev==0 && p->pDirty!=pPage ); |
- |
- pPage->pDirtyNext = p->pDirty; |
- if( pPage->pDirtyNext ){ |
- assert( pPage->pDirtyNext->pDirtyPrev==0 ); |
- pPage->pDirtyNext->pDirtyPrev = pPage; |
- } |
- p->pDirty = pPage; |
- if( !p->pDirtyTail ){ |
- p->pDirtyTail = pPage; |
- } |
- if( !p->pSynced && 0==(pPage->flags&PGHDR_NEED_SYNC) ){ |
- p->pSynced = pPage; |
} |
- expensive_assert( pcacheCheckSynced(p) ); |
} |
/* |
@@ -126,12 +117,22 @@ static void pcacheAddToDirtyList(PgHdr *pPage){ |
** being used for an in-memory database, this function is a no-op. |
*/ |
static void pcacheUnpin(PgHdr *p){ |
- PCache *pCache = p->pCache; |
- if( pCache->bPurgeable ){ |
+ if( p->pCache->bPurgeable ){ |
if( p->pgno==1 ){ |
- pCache->pPage1 = 0; |
+ p->pCache->pPage1 = 0; |
} |
- sqlite3GlobalConfig.pcache.xUnpin(pCache->pCache, p, 0); |
+ sqlite3GlobalConfig.pcache2.xUnpin(p->pCache->pCache, p->pPage, 0); |
+ } |
+} |
+ |
+/* |
+** Compute the number of pages of cache requested. |
+*/ |
+static int numberOfCachePages(PCache *p){ |
+ if( p->szCache>=0 ){ |
+ return p->szCache; |
+ }else{ |
+ return (int)((-1024*(i64)p->szCache)/(p->szPage+p->szExtra)); |
} |
} |
@@ -141,18 +142,18 @@ static void pcacheUnpin(PgHdr *p){ |
** functions are threadsafe. |
*/ |
int sqlite3PcacheInitialize(void){ |
- if( sqlite3GlobalConfig.pcache.xInit==0 ){ |
+ if( sqlite3GlobalConfig.pcache2.xInit==0 ){ |
/* IMPLEMENTATION-OF: R-26801-64137 If the xInit() method is NULL, then the |
** built-in default page cache is used instead of the application defined |
** page cache. */ |
sqlite3PCacheSetDefault(); |
} |
- return sqlite3GlobalConfig.pcache.xInit(sqlite3GlobalConfig.pcache.pArg); |
+ return sqlite3GlobalConfig.pcache2.xInit(sqlite3GlobalConfig.pcache2.pArg); |
} |
void sqlite3PcacheShutdown(void){ |
- if( sqlite3GlobalConfig.pcache.xShutdown ){ |
+ if( sqlite3GlobalConfig.pcache2.xShutdown ){ |
/* IMPLEMENTATION-OF: R-26000-56589 The xShutdown() method may be NULL. */ |
- sqlite3GlobalConfig.pcache.xShutdown(sqlite3GlobalConfig.pcache.pArg); |
+ sqlite3GlobalConfig.pcache2.xShutdown(sqlite3GlobalConfig.pcache2.pArg); |
} |
} |
@@ -167,7 +168,7 @@ int sqlite3PcacheSize(void){ return sizeof(PCache); } |
** The caller discovers how much space needs to be allocated by |
** calling sqlite3PcacheSize(). |
*/ |
-void sqlite3PcacheOpen( |
+int sqlite3PcacheOpen( |
int szPage, /* Size of every page */ |
int szExtra, /* Extra space associated with each page */ |
int bPurgeable, /* True if pages are on backing store */ |
@@ -176,134 +177,211 @@ void sqlite3PcacheOpen( |
PCache *p /* Preallocated space for the PCache */ |
){ |
memset(p, 0, sizeof(PCache)); |
- p->szPage = szPage; |
+ p->szPage = 1; |
p->szExtra = szExtra; |
p->bPurgeable = bPurgeable; |
+ p->eCreate = 2; |
p->xStress = xStress; |
p->pStress = pStress; |
- p->nMax = 100; |
+ p->szCache = 100; |
+ return sqlite3PcacheSetPageSize(p, szPage); |
} |
/* |
** Change the page size for PCache object. The caller must ensure that there |
** are no outstanding page references when this function is called. |
*/ |
-void sqlite3PcacheSetPageSize(PCache *pCache, int szPage){ |
+int sqlite3PcacheSetPageSize(PCache *pCache, int szPage){ |
assert( pCache->nRef==0 && pCache->pDirty==0 ); |
- if( pCache->pCache ){ |
- sqlite3GlobalConfig.pcache.xDestroy(pCache->pCache); |
- pCache->pCache = 0; |
+ if( pCache->szPage ){ |
+ sqlite3_pcache *pNew; |
+ pNew = sqlite3GlobalConfig.pcache2.xCreate( |
+ szPage, pCache->szExtra + sizeof(PgHdr), pCache->bPurgeable |
+ ); |
+ if( pNew==0 ) return SQLITE_NOMEM; |
+ sqlite3GlobalConfig.pcache2.xCachesize(pNew, numberOfCachePages(pCache)); |
+ if( pCache->pCache ){ |
+ sqlite3GlobalConfig.pcache2.xDestroy(pCache->pCache); |
+ } |
+ pCache->pCache = pNew; |
pCache->pPage1 = 0; |
+ pCache->szPage = szPage; |
} |
- pCache->szPage = szPage; |
+ return SQLITE_OK; |
} |
/* |
** Try to obtain a page from the cache. |
-*/ |
-int sqlite3PcacheFetch( |
+** |
+** This routine returns a pointer to an sqlite3_pcache_page object if |
+** such an object is already in cache, or if a new one is created. |
+** This routine returns a NULL pointer if the object was not in cache |
+** and could not be created. |
+** |
+** The createFlags should be 0 to check for existing pages and should |
+** be 3 (not 1, but 3) to try to create a new page. |
+** |
+** If the createFlag is 0, then NULL is always returned if the page |
+** is not already in the cache. If createFlag is 1, then a new page |
+** is created only if that can be done without spilling dirty pages |
+** and without exceeding the cache size limit. |
+** |
+** The caller needs to invoke sqlite3PcacheFetchFinish() to properly |
+** initialize the sqlite3_pcache_page object and convert it into a |
+** PgHdr object. The sqlite3PcacheFetch() and sqlite3PcacheFetchFinish() |
+** routines are split this way for performance reasons. When separated |
+** they can both (usually) operate without having to push values to |
+** the stack on entry and pop them back off on exit, which saves a |
+** lot of pushing and popping. |
+*/ |
+sqlite3_pcache_page *sqlite3PcacheFetch( |
PCache *pCache, /* Obtain the page from this cache */ |
Pgno pgno, /* Page number to obtain */ |
- int createFlag, /* If true, create page if it does not exist already */ |
- PgHdr **ppPage /* Write the page here */ |
+ int createFlag /* If true, create page if it does not exist already */ |
){ |
- PgHdr *pPage = 0; |
int eCreate; |
assert( pCache!=0 ); |
- assert( createFlag==1 || createFlag==0 ); |
+ assert( pCache->pCache!=0 ); |
+ assert( createFlag==3 || createFlag==0 ); |
assert( pgno>0 ); |
- /* If the pluggable cache (sqlite3_pcache*) has not been allocated, |
- ** allocate it now. |
+ /* eCreate defines what to do if the page does not exist. |
+ ** 0 Do not allocate a new page. (createFlag==0) |
+ ** 1 Allocate a new page if doing so is inexpensive. |
+ ** (createFlag==1 AND bPurgeable AND pDirty) |
+ ** 2 Allocate a new page even it doing so is difficult. |
+ ** (createFlag==1 AND !(bPurgeable AND pDirty) |
*/ |
- if( !pCache->pCache && createFlag ){ |
- sqlite3_pcache *p; |
- int nByte; |
- nByte = pCache->szPage + pCache->szExtra + sizeof(PgHdr); |
- p = sqlite3GlobalConfig.pcache.xCreate(nByte, pCache->bPurgeable); |
- if( !p ){ |
- return SQLITE_NOMEM; |
- } |
- sqlite3GlobalConfig.pcache.xCachesize(p, pCache->nMax); |
- pCache->pCache = p; |
- } |
+ eCreate = createFlag & pCache->eCreate; |
+ assert( eCreate==0 || eCreate==1 || eCreate==2 ); |
+ assert( createFlag==0 || pCache->eCreate==eCreate ); |
+ assert( createFlag==0 || eCreate==1+(!pCache->bPurgeable||!pCache->pDirty) ); |
+ return sqlite3GlobalConfig.pcache2.xFetch(pCache->pCache, pgno, eCreate); |
+} |
- eCreate = createFlag * (1 + (!pCache->bPurgeable || !pCache->pDirty)); |
- if( pCache->pCache ){ |
- pPage = sqlite3GlobalConfig.pcache.xFetch(pCache->pCache, pgno, eCreate); |
- } |
+/* |
+** If the sqlite3PcacheFetch() routine is unable to allocate a new |
+** page because new clean pages are available for reuse and the cache |
+** size limit has been reached, then this routine can be invoked to |
+** try harder to allocate a page. This routine might invoke the stress |
+** callback to spill dirty pages to the journal. It will then try to |
+** allocate the new page and will only fail to allocate a new page on |
+** an OOM error. |
+** |
+** This routine should be invoked only after sqlite3PcacheFetch() fails. |
+*/ |
+int sqlite3PcacheFetchStress( |
+ PCache *pCache, /* Obtain the page from this cache */ |
+ Pgno pgno, /* Page number to obtain */ |
+ sqlite3_pcache_page **ppPage /* Write result here */ |
+){ |
+ PgHdr *pPg; |
+ if( pCache->eCreate==2 ) return 0; |
- if( !pPage && eCreate==1 ){ |
- PgHdr *pPg; |
- |
- /* Find a dirty page to write-out and recycle. First try to find a |
- ** page that does not require a journal-sync (one with PGHDR_NEED_SYNC |
- ** cleared), but if that is not possible settle for any other |
- ** unreferenced dirty page. |
- */ |
- expensive_assert( pcacheCheckSynced(pCache) ); |
- for(pPg=pCache->pSynced; |
- pPg && (pPg->nRef || (pPg->flags&PGHDR_NEED_SYNC)); |
- pPg=pPg->pDirtyPrev |
- ); |
- pCache->pSynced = pPg; |
- if( !pPg ){ |
- for(pPg=pCache->pDirtyTail; pPg && pPg->nRef; pPg=pPg->pDirtyPrev); |
- } |
- if( pPg ){ |
- int rc; |
- rc = pCache->xStress(pCache->pStress, pPg); |
- if( rc!=SQLITE_OK && rc!=SQLITE_BUSY ){ |
- return rc; |
- } |
- } |
- pPage = sqlite3GlobalConfig.pcache.xFetch(pCache->pCache, pgno, 2); |
+ /* Find a dirty page to write-out and recycle. First try to find a |
+ ** page that does not require a journal-sync (one with PGHDR_NEED_SYNC |
+ ** cleared), but if that is not possible settle for any other |
+ ** unreferenced dirty page. |
+ */ |
+ for(pPg=pCache->pSynced; |
+ pPg && (pPg->nRef || (pPg->flags&PGHDR_NEED_SYNC)); |
+ pPg=pPg->pDirtyPrev |
+ ); |
+ pCache->pSynced = pPg; |
+ if( !pPg ){ |
+ for(pPg=pCache->pDirtyTail; pPg && pPg->nRef; pPg=pPg->pDirtyPrev); |
+ } |
+ if( pPg ){ |
+ int rc; |
+#ifdef SQLITE_LOG_CACHE_SPILL |
+ sqlite3_log(SQLITE_FULL, |
+ "spill page %d making room for %d - cache used: %d/%d", |
+ pPg->pgno, pgno, |
+ sqlite3GlobalConfig.pcache.xPagecount(pCache->pCache), |
+ numberOfCachePages(pCache)); |
+#endif |
+ rc = pCache->xStress(pCache->pStress, pPg); |
+ if( rc!=SQLITE_OK && rc!=SQLITE_BUSY ){ |
+ return rc; |
+ } |
} |
+ *ppPage = sqlite3GlobalConfig.pcache2.xFetch(pCache->pCache, pgno, 2); |
+ return *ppPage==0 ? SQLITE_NOMEM : SQLITE_OK; |
+} |
- if( pPage ){ |
- if( !pPage->pData ){ |
- memset(pPage, 0, sizeof(PgHdr)); |
- pPage->pData = (void *)&pPage[1]; |
- pPage->pExtra = (void*)&((char *)pPage->pData)[pCache->szPage]; |
- memset(pPage->pExtra, 0, pCache->szExtra); |
- pPage->pCache = pCache; |
- pPage->pgno = pgno; |
- } |
- assert( pPage->pCache==pCache ); |
- assert( pPage->pgno==pgno ); |
- assert( pPage->pData==(void *)&pPage[1] ); |
- assert( pPage->pExtra==(void *)&((char *)&pPage[1])[pCache->szPage] ); |
+/* |
+** This is a helper routine for sqlite3PcacheFetchFinish() |
+** |
+** In the uncommon case where the page being fetched has not been |
+** initialized, this routine is invoked to do the initialization. |
+** This routine is broken out into a separate function since it |
+** requires extra stack manipulation that can be avoided in the common |
+** case. |
+*/ |
+static SQLITE_NOINLINE PgHdr *pcacheFetchFinishWithInit( |
+ PCache *pCache, /* Obtain the page from this cache */ |
+ Pgno pgno, /* Page number obtained */ |
+ sqlite3_pcache_page *pPage /* Page obtained by prior PcacheFetch() call */ |
+){ |
+ PgHdr *pPgHdr; |
+ assert( pPage!=0 ); |
+ pPgHdr = (PgHdr*)pPage->pExtra; |
+ assert( pPgHdr->pPage==0 ); |
+ memset(pPgHdr, 0, sizeof(PgHdr)); |
+ pPgHdr->pPage = pPage; |
+ pPgHdr->pData = pPage->pBuf; |
+ pPgHdr->pExtra = (void *)&pPgHdr[1]; |
+ memset(pPgHdr->pExtra, 0, pCache->szExtra); |
+ pPgHdr->pCache = pCache; |
+ pPgHdr->pgno = pgno; |
+ return sqlite3PcacheFetchFinish(pCache,pgno,pPage); |
+} |
- if( 0==pPage->nRef ){ |
- pCache->nRef++; |
- } |
- pPage->nRef++; |
- if( pgno==1 ){ |
- pCache->pPage1 = pPage; |
- } |
+/* |
+** This routine converts the sqlite3_pcache_page object returned by |
+** sqlite3PcacheFetch() into an initialized PgHdr object. This routine |
+** must be called after sqlite3PcacheFetch() in order to get a usable |
+** result. |
+*/ |
+PgHdr *sqlite3PcacheFetchFinish( |
+ PCache *pCache, /* Obtain the page from this cache */ |
+ Pgno pgno, /* Page number obtained */ |
+ sqlite3_pcache_page *pPage /* Page obtained by prior PcacheFetch() call */ |
+){ |
+ PgHdr *pPgHdr; |
+ |
+ if( pPage==0 ) return 0; |
+ pPgHdr = (PgHdr *)pPage->pExtra; |
+ |
+ if( !pPgHdr->pPage ){ |
+ return pcacheFetchFinishWithInit(pCache, pgno, pPage); |
+ } |
+ if( 0==pPgHdr->nRef ){ |
+ pCache->nRef++; |
} |
- *ppPage = pPage; |
- return (pPage==0 && eCreate) ? SQLITE_NOMEM : SQLITE_OK; |
+ pPgHdr->nRef++; |
+ if( pgno==1 ){ |
+ pCache->pPage1 = pPgHdr; |
+ } |
+ return pPgHdr; |
} |
/* |
** Decrement the reference count on a page. If the page is clean and the |
-** reference count drops to 0, then it is made elible for recycling. |
+** reference count drops to 0, then it is made eligible for recycling. |
*/ |
-void sqlite3PcacheRelease(PgHdr *p){ |
+void SQLITE_NOINLINE sqlite3PcacheRelease(PgHdr *p){ |
assert( p->nRef>0 ); |
p->nRef--; |
if( p->nRef==0 ){ |
- PCache *pCache = p->pCache; |
- pCache->nRef--; |
+ p->pCache->nRef--; |
if( (p->flags&PGHDR_DIRTY)==0 ){ |
pcacheUnpin(p); |
- }else{ |
+ }else if( p->pDirtyPrev!=0 ){ |
/* Move the page to the head of the dirty list. */ |
- pcacheRemoveFromDirtyList(p); |
- pcacheAddToDirtyList(p); |
+ pcacheManageDirtyList(p, PCACHE_DIRTYLIST_FRONT); |
} |
} |
} |
@@ -322,17 +400,15 @@ void sqlite3PcacheRef(PgHdr *p){ |
** page pointed to by p is invalid. |
*/ |
void sqlite3PcacheDrop(PgHdr *p){ |
- PCache *pCache; |
assert( p->nRef==1 ); |
if( p->flags&PGHDR_DIRTY ){ |
- pcacheRemoveFromDirtyList(p); |
+ pcacheManageDirtyList(p, PCACHE_DIRTYLIST_REMOVE); |
} |
- pCache = p->pCache; |
- pCache->nRef--; |
+ p->pCache->nRef--; |
if( p->pgno==1 ){ |
- pCache->pPage1 = 0; |
+ p->pCache->pPage1 = 0; |
} |
- sqlite3GlobalConfig.pcache.xUnpin(pCache->pCache, p, 1); |
+ sqlite3GlobalConfig.pcache2.xUnpin(p->pCache->pCache, p->pPage, 1); |
} |
/* |
@@ -344,7 +420,7 @@ void sqlite3PcacheMakeDirty(PgHdr *p){ |
assert( p->nRef>0 ); |
if( 0==(p->flags & PGHDR_DIRTY) ){ |
p->flags |= PGHDR_DIRTY; |
- pcacheAddToDirtyList( p); |
+ pcacheManageDirtyList(p, PCACHE_DIRTYLIST_ADD); |
} |
} |
@@ -354,7 +430,7 @@ void sqlite3PcacheMakeDirty(PgHdr *p){ |
*/ |
void sqlite3PcacheMakeClean(PgHdr *p){ |
if( (p->flags & PGHDR_DIRTY) ){ |
- pcacheRemoveFromDirtyList(p); |
+ pcacheManageDirtyList(p, PCACHE_DIRTYLIST_REMOVE); |
p->flags &= ~(PGHDR_DIRTY|PGHDR_NEED_SYNC); |
if( p->nRef==0 ){ |
pcacheUnpin(p); |
@@ -390,11 +466,10 @@ void sqlite3PcacheMove(PgHdr *p, Pgno newPgno){ |
PCache *pCache = p->pCache; |
assert( p->nRef>0 ); |
assert( newPgno>0 ); |
- sqlite3GlobalConfig.pcache.xRekey(pCache->pCache, p, p->pgno, newPgno); |
+ sqlite3GlobalConfig.pcache2.xRekey(pCache->pCache, p->pPage, p->pgno,newPgno); |
p->pgno = newPgno; |
if( (p->flags&PGHDR_DIRTY) && (p->flags&PGHDR_NEED_SYNC) ){ |
- pcacheRemoveFromDirtyList(p); |
- pcacheAddToDirtyList(p); |
+ pcacheManageDirtyList(p, PCACHE_DIRTYLIST_FRONT); |
} |
} |
@@ -427,7 +502,7 @@ void sqlite3PcacheTruncate(PCache *pCache, Pgno pgno){ |
memset(pCache->pPage1->pData, 0, pCache->szPage); |
pgno = 1; |
} |
- sqlite3GlobalConfig.pcache.xTruncate(pCache->pCache, pgno+1); |
+ sqlite3GlobalConfig.pcache2.xTruncate(pCache->pCache, pgno+1); |
} |
} |
@@ -435,9 +510,8 @@ void sqlite3PcacheTruncate(PCache *pCache, Pgno pgno){ |
** Close a cache. |
*/ |
void sqlite3PcacheClose(PCache *pCache){ |
- if( pCache->pCache ){ |
- sqlite3GlobalConfig.pcache.xDestroy(pCache->pCache); |
- } |
+ assert( pCache->pCache!=0 ); |
+ sqlite3GlobalConfig.pcache2.xDestroy(pCache->pCache); |
} |
/* |
@@ -546,11 +620,8 @@ int sqlite3PcachePageRefcount(PgHdr *p){ |
** Return the total number of pages in the cache. |
*/ |
int sqlite3PcachePagecount(PCache *pCache){ |
- int nPage = 0; |
- if( pCache->pCache ){ |
- nPage = sqlite3GlobalConfig.pcache.xPagecount(pCache->pCache); |
- } |
- return nPage; |
+ assert( pCache->pCache!=0 ); |
+ return sqlite3GlobalConfig.pcache2.xPagecount(pCache->pCache); |
} |
#ifdef SQLITE_TEST |
@@ -558,7 +629,7 @@ int sqlite3PcachePagecount(PCache *pCache){ |
** Get the suggested cache-size value. |
*/ |
int sqlite3PcacheGetCachesize(PCache *pCache){ |
- return pCache->nMax; |
+ return numberOfCachePages(pCache); |
} |
#endif |
@@ -566,10 +637,18 @@ int sqlite3PcacheGetCachesize(PCache *pCache){ |
** Set the suggested cache-size value. |
*/ |
void sqlite3PcacheSetCachesize(PCache *pCache, int mxPage){ |
- pCache->nMax = mxPage; |
- if( pCache->pCache ){ |
- sqlite3GlobalConfig.pcache.xCachesize(pCache->pCache, mxPage); |
- } |
+ assert( pCache->pCache!=0 ); |
+ pCache->szCache = mxPage; |
+ sqlite3GlobalConfig.pcache2.xCachesize(pCache->pCache, |
+ numberOfCachePages(pCache)); |
+} |
+ |
+/* |
+** Free up as much memory as possible from the page cache. |
+*/ |
+void sqlite3PcacheShrink(PCache *pCache){ |
+ assert( pCache->pCache!=0 ); |
+ sqlite3GlobalConfig.pcache2.xShrink(pCache->pCache); |
} |
#if defined(SQLITE_CHECK_PAGES) || defined(SQLITE_DEBUG) |