Add //third_party/sqlite to dirs_to_snapshot, remove net_sql.patch

third_party/sqlite/sqlite-src-3070603/ext/fts3/fts3_expr.c

Index: third_party/sqlite/sqlite-src-3070603/ext/fts3/fts3_expr.c
diff --git a/third_party/sqlite/sqlite-src-3070603/ext/fts3/fts3_expr.c b/third_party/sqlite/sqlite-src-3070603/ext/fts3/fts3_expr.c
new file mode 100644
index 0000000000000000000000000000000000000000..43f6d84a8409773ac32e76032a164eb91900ff44
--- /dev/null
+++ b/third_party/sqlite/sqlite-src-3070603/ext/fts3/fts3_expr.c
@@ -0,0 +1,937 @@
+/*
+** 2008 Nov 28
+**
+** The author disclaims copyright to this source code.  In place of
+** a legal notice, here is a blessing:
+**
+**    May you do good and not evil.
+**    May you find forgiveness for yourself and forgive others.
+**    May you share freely, never taking more than you give.
+**
+******************************************************************************
+**
+** This module contains code that implements a parser for fts3 query strings
+** (the right-hand argument to the MATCH operator). Because the supported 
+** syntax is relatively simple, the whole tokenizer/parser system is
+** hand-coded. 
+*/
+#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3)
+
+/*
+** By default, this module parses the legacy syntax that has been 
+** traditionally used by fts3. Or, if SQLITE_ENABLE_FTS3_PARENTHESIS
+** is defined, then it uses the new syntax. The differences between
+** the new and the old syntaxes are:
+**
+**  a) The new syntax supports parenthesis. The old does not.
+**
+**  b) The new syntax supports the AND and NOT operators. The old does not.
+**
+**  c) The old syntax supports the "-" token qualifier. This is not 
+**     supported by the new syntax (it is replaced by the NOT operator).
+**
+**  d) When using the old syntax, the OR operator has a greater precedence
+**     than an implicit AND. When using the new, both implicity and explicit
+**     AND operators have a higher precedence than OR.
+**
+** If compiled with SQLITE_TEST defined, then this module exports the
+** symbol "int sqlite3_fts3_enable_parentheses". Setting this variable
+** to zero causes the module to use the old syntax. If it is set to 
+** non-zero the new syntax is activated. This is so both syntaxes can
+** be tested using a single build of testfixture.
+**
+** The following describes the syntax supported by the fts3 MATCH
+** operator in a similar format to that used by the lemon parser
+** generator. This module does not use actually lemon, it uses a
+** custom parser.
+**
+**   query ::= andexpr (OR andexpr)*.
+**
+**   andexpr ::= notexpr (AND? notexpr)*.
+**
+**   notexpr ::= nearexpr (NOT nearexpr|-TOKEN)*.
+**   notexpr ::= LP query RP.
+**
+**   nearexpr ::= phrase (NEAR distance_opt nearexpr)*.
+**
+**   distance_opt ::= .
+**   distance_opt ::= / INTEGER.
+**
+**   phrase ::= TOKEN.
+**   phrase ::= COLUMN:TOKEN.
+**   phrase ::= "TOKEN TOKEN TOKEN...".
+*/
+
+#ifdef SQLITE_TEST
+int sqlite3_fts3_enable_parentheses = 0;
+#else
+# ifdef SQLITE_ENABLE_FTS3_PARENTHESIS 
+#  define sqlite3_fts3_enable_parentheses 1
+# else
+#  define sqlite3_fts3_enable_parentheses 0
+# endif
+#endif
+
+/*
+** Default span for NEAR operators.
+*/
+#define SQLITE_FTS3_DEFAULT_NEAR_PARAM 10
+
+#include "fts3Int.h"
+#include <string.h>
+#include <assert.h>
+
+typedef struct ParseContext ParseContext;
+struct ParseContext {
+  sqlite3_tokenizer *pTokenizer;      /* Tokenizer module */
+  const char **azCol;                 /* Array of column names for fts3 table */
+  int nCol;                           /* Number of entries in azCol[] */
+  int iDefaultCol;                    /* Default column to query */
+  sqlite3_context *pCtx;              /* Write error message here */
+  int nNest;                          /* Number of nested brackets */
+};
+
+/*
+** This function is equivalent to the standard isspace() function. 
+**
+** The standard isspace() can be awkward to use safely, because although it
+** is defined to accept an argument of type int, its behaviour when passed
+** an integer that falls outside of the range of the unsigned char type
+** is undefined (and sometimes, "undefined" means segfault). This wrapper
+** is defined to accept an argument of type char, and always returns 0 for
+** any values that fall outside of the range of the unsigned char type (i.e.
+** negative values).
+*/
+static int fts3isspace(char c){
+  return c==' ' || c=='\t' || c=='\n' || c=='\r' || c=='\v' || c=='\f';
+}
+
+/*
+** Allocate nByte bytes of memory using sqlite3_malloc(). If successful,
+** zero the memory before returning a pointer to it. If unsuccessful, 
+** return NULL.
+*/
+static void *fts3MallocZero(int nByte){
+  void *pRet = sqlite3_malloc(nByte);
+  if( pRet ) memset(pRet, 0, nByte);
+  return pRet;
+}
+
+
+/*
+** Extract the next token from buffer z (length n) using the tokenizer
+** and other information (column names etc.) in pParse. Create an Fts3Expr
+** structure of type FTSQUERY_PHRASE containing a phrase consisting of this
+** single token and set *ppExpr to point to it. If the end of the buffer is
+** reached before a token is found, set *ppExpr to zero. It is the
+** responsibility of the caller to eventually deallocate the allocated 
+** Fts3Expr structure (if any) by passing it to sqlite3_free().
+**
+** Return SQLITE_OK if successful, or SQLITE_NOMEM if a memory allocation
+** fails.
+*/
+static int getNextToken(
+  ParseContext *pParse,                   /* fts3 query parse context */
+  int iCol,                               /* Value for Fts3Phrase.iColumn */
+  const char *z, int n,                   /* Input string */
+  Fts3Expr **ppExpr,                      /* OUT: expression */
+  int *pnConsumed                         /* OUT: Number of bytes consumed */
+){
+  sqlite3_tokenizer *pTokenizer = pParse->pTokenizer;
+  sqlite3_tokenizer_module const *pModule = pTokenizer->pModule;
+  int rc;
+  sqlite3_tokenizer_cursor *pCursor;
+  Fts3Expr *pRet = 0;
+  int nConsumed = 0;
+
+  rc = pModule->xOpen(pTokenizer, z, n, &pCursor);
+  if( rc==SQLITE_OK ){
+    const char *zToken;
+    int nToken, iStart, iEnd, iPosition;
+    int nByte;                               /* total space to allocate */
+
+    pCursor->pTokenizer = pTokenizer;
+    rc = pModule->xNext(pCursor, &zToken, &nToken, &iStart, &iEnd, &iPosition);
+
+    if( rc==SQLITE_OK ){
+      nByte = sizeof(Fts3Expr) + sizeof(Fts3Phrase) + nToken;
+      pRet = (Fts3Expr *)fts3MallocZero(nByte);
+      if( !pRet ){
+        rc = SQLITE_NOMEM;
+      }else{
+        pRet->eType = FTSQUERY_PHRASE;
+        pRet->pPhrase = (Fts3Phrase *)&pRet[1];
+        pRet->pPhrase->nToken = 1;
+        pRet->pPhrase->iColumn = iCol;
+        pRet->pPhrase->aToken[0].n = nToken;
+        pRet->pPhrase->aToken[0].z = (char *)&pRet->pPhrase[1];
+        memcpy(pRet->pPhrase->aToken[0].z, zToken, nToken);
+
+        if( iEnd<n && z[iEnd]=='*' ){
+          pRet->pPhrase->aToken[0].isPrefix = 1;
+          iEnd++;
+        }
+        if( !sqlite3_fts3_enable_parentheses && iStart>0 && z[iStart-1]=='-' ){
+          pRet->pPhrase->isNot = 1;
+        }
+      }
+      nConsumed = iEnd;
+    }
+
+    pModule->xClose(pCursor);
+  }
+  
+  *pnConsumed = nConsumed;
+  *ppExpr = pRet;
+  return rc;
+}
+
+
+/*
+** Enlarge a memory allocation.  If an out-of-memory allocation occurs,
+** then free the old allocation.
+*/
+static void *fts3ReallocOrFree(void *pOrig, int nNew){
+  void *pRet = sqlite3_realloc(pOrig, nNew);
+  if( !pRet ){
+    sqlite3_free(pOrig);
+  }
+  return pRet;
+}
+
+/*
+** Buffer zInput, length nInput, contains the contents of a quoted string
+** that appeared as part of an fts3 query expression. Neither quote character
+** is included in the buffer. This function attempts to tokenize the entire
+** input buffer and create an Fts3Expr structure of type FTSQUERY_PHRASE 
+** containing the results.
+**
+** If successful, SQLITE_OK is returned and *ppExpr set to point at the
+** allocated Fts3Expr structure. Otherwise, either SQLITE_NOMEM (out of memory
+** error) or SQLITE_ERROR (tokenization error) is returned and *ppExpr set
+** to 0.
+*/
+static int getNextString(
+  ParseContext *pParse,                   /* fts3 query parse context */
+  const char *zInput, int nInput,         /* Input string */
+  Fts3Expr **ppExpr                       /* OUT: expression */
+){
+  sqlite3_tokenizer *pTokenizer = pParse->pTokenizer;
+  sqlite3_tokenizer_module const *pModule = pTokenizer->pModule;
+  int rc;
+  Fts3Expr *p = 0;
+  sqlite3_tokenizer_cursor *pCursor = 0;
+  char *zTemp = 0;
+  int nTemp = 0;
+
+  rc = pModule->xOpen(pTokenizer, zInput, nInput, &pCursor);
+  if( rc==SQLITE_OK ){
+    int ii;
+    pCursor->pTokenizer = pTokenizer;
+    for(ii=0; rc==SQLITE_OK; ii++){
+      const char *zToken;
+      int nToken, iBegin, iEnd, iPos;
+      rc = pModule->xNext(pCursor, &zToken, &nToken, &iBegin, &iEnd, &iPos);
+      if( rc==SQLITE_OK ){
+        int nByte = sizeof(Fts3Expr) + sizeof(Fts3Phrase);
+        p = fts3ReallocOrFree(p, nByte+ii*sizeof(Fts3PhraseToken));
+        zTemp = fts3ReallocOrFree(zTemp, nTemp + nToken);
+        if( !p || !zTemp ){
+          goto no_mem;
+        }
+        if( ii==0 ){
+          memset(p, 0, nByte);
+          p->pPhrase = (Fts3Phrase *)&p[1];
+        }
+        p->pPhrase = (Fts3Phrase *)&p[1];
+        memset(&p->pPhrase->aToken[ii], 0, sizeof(Fts3PhraseToken));
+        p->pPhrase->nToken = ii+1;
+        p->pPhrase->aToken[ii].n = nToken;
+        memcpy(&zTemp[nTemp], zToken, nToken);
+        nTemp += nToken;
+        if( iEnd<nInput && zInput[iEnd]=='*' ){
+          p->pPhrase->aToken[ii].isPrefix = 1;
+        }else{
+          p->pPhrase->aToken[ii].isPrefix = 0;
+        }
+      }
+    }
+
+    pModule->xClose(pCursor);
+    pCursor = 0;
+  }
+
+  if( rc==SQLITE_DONE ){
+    int jj;
+    char *zNew = NULL;
+    int nNew = 0;
+    int nByte = sizeof(Fts3Expr) + sizeof(Fts3Phrase);
+    nByte += (p?(p->pPhrase->nToken-1):0) * sizeof(Fts3PhraseToken);
+    p = fts3ReallocOrFree(p, nByte + nTemp);
+    if( !p ){
+      goto no_mem;
+    }
+    if( zTemp ){
+      zNew = &(((char *)p)[nByte]);
+      memcpy(zNew, zTemp, nTemp);
+    }else{
+      memset(p, 0, nByte+nTemp);
+    }
+    p->pPhrase = (Fts3Phrase *)&p[1];
+    for(jj=0; jj<p->pPhrase->nToken; jj++){
+      p->pPhrase->aToken[jj].z = &zNew[nNew];
+      nNew += p->pPhrase->aToken[jj].n;
+    }
+    sqlite3_free(zTemp);
+    p->eType = FTSQUERY_PHRASE;
+    p->pPhrase->iColumn = pParse->iDefaultCol;
+    rc = SQLITE_OK;
+  }
+
+  *ppExpr = p;
+  return rc;
+no_mem:
+
+  if( pCursor ){
+    pModule->xClose(pCursor);
+  }
+  sqlite3_free(zTemp);
+  sqlite3_free(p);
+  *ppExpr = 0;
+  return SQLITE_NOMEM;
+}
+
+/*
+** Function getNextNode(), which is called by fts3ExprParse(), may itself
+** call fts3ExprParse(). So this forward declaration is required.
+*/
+static int fts3ExprParse(ParseContext *, const char *, int, Fts3Expr **, int *);
+
+/*
+** The output variable *ppExpr is populated with an allocated Fts3Expr 
+** structure, or set to 0 if the end of the input buffer is reached.
+**
+** Returns an SQLite error code. SQLITE_OK if everything works, SQLITE_NOMEM
+** if a malloc failure occurs, or SQLITE_ERROR if a parse error is encountered.
+** If SQLITE_ERROR is returned, pContext is populated with an error message.
+*/
+static int getNextNode(
+  ParseContext *pParse,                   /* fts3 query parse context */
+  const char *z, int n,                   /* Input string */
+  Fts3Expr **ppExpr,                      /* OUT: expression */
+  int *pnConsumed                         /* OUT: Number of bytes consumed */
+){
+  static const struct Fts3Keyword {
+    char *z;                              /* Keyword text */
+    unsigned char n;                      /* Length of the keyword */
+    unsigned char parenOnly;              /* Only valid in paren mode */
+    unsigned char eType;                  /* Keyword code */
+  } aKeyword[] = {
+    { "OR" ,  2, 0, FTSQUERY_OR   },
+    { "AND",  3, 1, FTSQUERY_AND  },
+    { "NOT",  3, 1, FTSQUERY_NOT  },
+    { "NEAR", 4, 0, FTSQUERY_NEAR }
+  };
+  int ii;
+  int iCol;
+  int iColLen;
+  int rc;
+  Fts3Expr *pRet = 0;
+
+  const char *zInput = z;
+  int nInput = n;
+
+  /* Skip over any whitespace before checking for a keyword, an open or
+  ** close bracket, or a quoted string. 
+  */
+  while( nInput>0 && fts3isspace(*zInput) ){
+    nInput--;
+    zInput++;
+  }
+  if( nInput==0 ){
+    return SQLITE_DONE;
+  }
+
+  /* See if we are dealing with a keyword. */
+  for(ii=0; ii<(int)(sizeof(aKeyword)/sizeof(struct Fts3Keyword)); ii++){
+    const struct Fts3Keyword *pKey = &aKeyword[ii];
+
+    if( (pKey->parenOnly & ~sqlite3_fts3_enable_parentheses)!=0 ){
+      continue;
+    }
+
+    if( nInput>=pKey->n && 0==memcmp(zInput, pKey->z, pKey->n) ){
+      int nNear = SQLITE_FTS3_DEFAULT_NEAR_PARAM;
+      int nKey = pKey->n;
+      char cNext;
+
+      /* If this is a "NEAR" keyword, check for an explicit nearness. */
+      if( pKey->eType==FTSQUERY_NEAR ){
+        assert( nKey==4 );
+        if( zInput[4]=='/' && zInput[5]>='0' && zInput[5]<='9' ){
+          nNear = 0;
+          for(nKey=5; zInput[nKey]>='0' && zInput[nKey]<='9'; nKey++){
+            nNear = nNear * 10 + (zInput[nKey] - '0');
+          }
+        }
+      }
+
+      /* At this point this is probably a keyword. But for that to be true,
+      ** the next byte must contain either whitespace, an open or close
+      ** parenthesis, a quote character, or EOF. 
+      */
+      cNext = zInput[nKey];
+      if( fts3isspace(cNext) 
+       || cNext=='"' || cNext=='(' || cNext==')' || cNext==0
+      ){
+        pRet = (Fts3Expr *)fts3MallocZero(sizeof(Fts3Expr));
+        if( !pRet ){
+          return SQLITE_NOMEM;
+        }
+        pRet->eType = pKey->eType;
+        pRet->nNear = nNear;
+        *ppExpr = pRet;
+        *pnConsumed = (int)((zInput - z) + nKey);
+        return SQLITE_OK;
+      }
+
+      /* Turns out that wasn't a keyword after all. This happens if the
+      ** user has supplied a token such as "ORacle". Continue.
+      */
+    }
+  }
+
+  /* Check for an open bracket. */
+  if( sqlite3_fts3_enable_parentheses ){
+    if( *zInput=='(' ){
+      int nConsumed;
+      pParse->nNest++;
+      rc = fts3ExprParse(pParse, &zInput[1], nInput-1, ppExpr, &nConsumed);
+      if( rc==SQLITE_OK && !*ppExpr ){
+        rc = SQLITE_DONE;
+      }
+      *pnConsumed = (int)((zInput - z) + 1 + nConsumed);
+      return rc;
+    }
+  
+    /* Check for a close bracket. */
+    if( *zInput==')' ){
+      pParse->nNest--;
+      *pnConsumed = (int)((zInput - z) + 1);
+      return SQLITE_DONE;
+    }
+  }
+
+  /* See if we are dealing with a quoted phrase. If this is the case, then
+  ** search for the closing quote and pass the whole string to getNextString()
+  ** for processing. This is easy to do, as fts3 has no syntax for escaping
+  ** a quote character embedded in a string.
+  */
+  if( *zInput=='"' ){
+    for(ii=1; ii<nInput && zInput[ii]!='"'; ii++);
+    *pnConsumed = (int)((zInput - z) + ii + 1);
+    if( ii==nInput ){
+      return SQLITE_ERROR;
+    }
+    return getNextString(pParse, &zInput[1], ii-1, ppExpr);
+  }
+
+
+  /* If control flows to this point, this must be a regular token, or 
+  ** the end of the input. Read a regular token using the sqlite3_tokenizer
+  ** interface. Before doing so, figure out if there is an explicit
+  ** column specifier for the token. 
+  **
+  ** TODO: Strangely, it is not possible to associate a column specifier
+  ** with a quoted phrase, only with a single token. Not sure if this was
+  ** an implementation artifact or an intentional decision when fts3 was
+  ** first implemented. Whichever it was, this module duplicates the 
+  ** limitation.
+  */
+  iCol = pParse->iDefaultCol;
+  iColLen = 0;
+  for(ii=0; ii<pParse->nCol; ii++){
+    const char *zStr = pParse->azCol[ii];
+    int nStr = (int)strlen(zStr);
+    if( nInput>nStr && zInput[nStr]==':' 
+     && sqlite3_strnicmp(zStr, zInput, nStr)==0 
+    ){
+      iCol = ii;
+      iColLen = (int)((zInput - z) + nStr + 1);
+      break;
+    }
+  }
+  rc = getNextToken(pParse, iCol, &z[iColLen], n-iColLen, ppExpr, pnConsumed);
+  *pnConsumed += iColLen;
+  return rc;
+}
+
+/*
+** The argument is an Fts3Expr structure for a binary operator (any type
+** except an FTSQUERY_PHRASE). Return an integer value representing the
+** precedence of the operator. Lower values have a higher precedence (i.e.
+** group more tightly). For example, in the C language, the == operator
+** groups more tightly than ||, and would therefore have a higher precedence.
+**
+** When using the new fts3 query syntax (when SQLITE_ENABLE_FTS3_PARENTHESIS
+** is defined), the order of the operators in precedence from highest to
+** lowest is:
+**
+**   NEAR
+**   NOT
+**   AND (including implicit ANDs)
+**   OR
+**
+** Note that when using the old query syntax, the OR operator has a higher
+** precedence than the AND operator.
+*/
+static int opPrecedence(Fts3Expr *p){
+  assert( p->eType!=FTSQUERY_PHRASE );
+  if( sqlite3_fts3_enable_parentheses ){
+    return p->eType;
+  }else if( p->eType==FTSQUERY_NEAR ){
+    return 1;
+  }else if( p->eType==FTSQUERY_OR ){
+    return 2;
+  }
+  assert( p->eType==FTSQUERY_AND );
+  return 3;
+}
+
+/*
+** Argument ppHead contains a pointer to the current head of a query 
+** expression tree being parsed. pPrev is the expression node most recently
+** inserted into the tree. This function adds pNew, which is always a binary
+** operator node, into the expression tree based on the relative precedence
+** of pNew and the existing nodes of the tree. This may result in the head
+** of the tree changing, in which case *ppHead is set to the new root node.
+*/
+static void insertBinaryOperator(
+  Fts3Expr **ppHead,       /* Pointer to the root node of a tree */
+  Fts3Expr *pPrev,         /* Node most recently inserted into the tree */
+  Fts3Expr *pNew           /* New binary node to insert into expression tree */
+){
+  Fts3Expr *pSplit = pPrev;
+  while( pSplit->pParent && opPrecedence(pSplit->pParent)<=opPrecedence(pNew) ){
+    pSplit = pSplit->pParent;
+  }
+
+  if( pSplit->pParent ){
+    assert( pSplit->pParent->pRight==pSplit );
+    pSplit->pParent->pRight = pNew;
+    pNew->pParent = pSplit->pParent;
+  }else{
+    *ppHead = pNew;
+  }
+  pNew->pLeft = pSplit;
+  pSplit->pParent = pNew;
+}
+
+/*
+** Parse the fts3 query expression found in buffer z, length n. This function
+** returns either when the end of the buffer is reached or an unmatched 
+** closing bracket - ')' - is encountered.
+**
+** If successful, SQLITE_OK is returned, *ppExpr is set to point to the
+** parsed form of the expression and *pnConsumed is set to the number of
+** bytes read from buffer z. Otherwise, *ppExpr is set to 0 and SQLITE_NOMEM
+** (out of memory error) or SQLITE_ERROR (parse error) is returned.
+*/
+static int fts3ExprParse(
+  ParseContext *pParse,                   /* fts3 query parse context */
+  const char *z, int n,                   /* Text of MATCH query */
+  Fts3Expr **ppExpr,                      /* OUT: Parsed query structure */
+  int *pnConsumed                         /* OUT: Number of bytes consumed */
+){
+  Fts3Expr *pRet = 0;
+  Fts3Expr *pPrev = 0;
+  Fts3Expr *pNotBranch = 0;               /* Only used in legacy parse mode */
+  int nIn = n;
+  const char *zIn = z;
+  int rc = SQLITE_OK;
+  int isRequirePhrase = 1;
+
+  while( rc==SQLITE_OK ){
+    Fts3Expr *p = 0;
+    int nByte = 0;
+    rc = getNextNode(pParse, zIn, nIn, &p, &nByte);
+    if( rc==SQLITE_OK ){
+      int isPhrase;
+
+      if( !sqlite3_fts3_enable_parentheses 
+       && p->eType==FTSQUERY_PHRASE && p->pPhrase->isNot 
+      ){
+        /* Create an implicit NOT operator. */
+        Fts3Expr *pNot = fts3MallocZero(sizeof(Fts3Expr));
+        if( !pNot ){
+          sqlite3Fts3ExprFree(p);
+          rc = SQLITE_NOMEM;
+          goto exprparse_out;
+        }
+        pNot->eType = FTSQUERY_NOT;
+        pNot->pRight = p;
+        if( pNotBranch ){
+          pNot->pLeft = pNotBranch;
+        }
+        pNotBranch = pNot;
+        p = pPrev;
+      }else{
+        int eType = p->eType;
+        assert( eType!=FTSQUERY_PHRASE || !p->pPhrase->isNot );
+        isPhrase = (eType==FTSQUERY_PHRASE || p->pLeft);
+
+        /* The isRequirePhrase variable is set to true if a phrase or
+        ** an expression contained in parenthesis is required. If a
+        ** binary operator (AND, OR, NOT or NEAR) is encounted when
+        ** isRequirePhrase is set, this is a syntax error.
+        */
+        if( !isPhrase && isRequirePhrase ){
+          sqlite3Fts3ExprFree(p);
+          rc = SQLITE_ERROR;
+          goto exprparse_out;
+        }
+  
+        if( isPhrase && !isRequirePhrase ){
+          /* Insert an implicit AND operator. */
+          Fts3Expr *pAnd;
+          assert( pRet && pPrev );
+          pAnd = fts3MallocZero(sizeof(Fts3Expr));
+          if( !pAnd ){
+            sqlite3Fts3ExprFree(p);
+            rc = SQLITE_NOMEM;
+            goto exprparse_out;
+          }
+          pAnd->eType = FTSQUERY_AND;
+          insertBinaryOperator(&pRet, pPrev, pAnd);
+          pPrev = pAnd;
+        }
+
+        /* This test catches attempts to make either operand of a NEAR
+        ** operator something other than a phrase. For example, either of
+        ** the following:
+        **
+        **    (bracketed expression) NEAR phrase
+        **    phrase NEAR (bracketed expression)
+        **
+        ** Return an error in either case.
+        */
+        if( pPrev && (
+            (eType==FTSQUERY_NEAR && !isPhrase && pPrev->eType!=FTSQUERY_PHRASE)
+         || (eType!=FTSQUERY_PHRASE && isPhrase && pPrev->eType==FTSQUERY_NEAR)
+        )){
+          sqlite3Fts3ExprFree(p);
+          rc = SQLITE_ERROR;
+          goto exprparse_out;
+        }
+  
+        if( isPhrase ){
+          if( pRet ){
+            assert( pPrev && pPrev->pLeft && pPrev->pRight==0 );
+            pPrev->pRight = p;
+            p->pParent = pPrev;
+          }else{
+            pRet = p;
+          }
+        }else{
+          insertBinaryOperator(&pRet, pPrev, p);
+        }
+        isRequirePhrase = !isPhrase;
+      }
+      assert( nByte>0 );
+    }
+    assert( rc!=SQLITE_OK || (nByte>0 && nByte<=nIn) );
+    nIn -= nByte;
+    zIn += nByte;
+    pPrev = p;
+  }
+
+  if( rc==SQLITE_DONE && pRet && isRequirePhrase ){
+    rc = SQLITE_ERROR;
+  }
+
+  if( rc==SQLITE_DONE ){
+    rc = SQLITE_OK;
+    if( !sqlite3_fts3_enable_parentheses && pNotBranch ){
+      if( !pRet ){
+        rc = SQLITE_ERROR;
+      }else{
+        Fts3Expr *pIter = pNotBranch;
+        while( pIter->pLeft ){
+          pIter = pIter->pLeft;
+        }
+        pIter->pLeft = pRet;
+        pRet = pNotBranch;
+      }
+    }
+  }
+  *pnConsumed = n - nIn;
+
+exprparse_out:
+  if( rc!=SQLITE_OK ){
+    sqlite3Fts3ExprFree(pRet);
+    sqlite3Fts3ExprFree(pNotBranch);
+    pRet = 0;
+  }
+  *ppExpr = pRet;
+  return rc;
+}
+
+/*
+** Parameters z and n contain a pointer to and length of a buffer containing
+** an fts3 query expression, respectively. This function attempts to parse the
+** query expression and create a tree of Fts3Expr structures representing the
+** parsed expression. If successful, *ppExpr is set to point to the head
+** of the parsed expression tree and SQLITE_OK is returned. If an error
+** occurs, either SQLITE_NOMEM (out-of-memory error) or SQLITE_ERROR (parse
+** error) is returned and *ppExpr is set to 0.
+**
+** If parameter n is a negative number, then z is assumed to point to a
+** nul-terminated string and the length is determined using strlen().
+**
+** The first parameter, pTokenizer, is passed the fts3 tokenizer module to
+** use to normalize query tokens while parsing the expression. The azCol[]
+** array, which is assumed to contain nCol entries, should contain the names
+** of each column in the target fts3 table, in order from left to right. 
+** Column names must be nul-terminated strings.
+**
+** The iDefaultCol parameter should be passed the index of the table column
+** that appears on the left-hand-side of the MATCH operator (the default
+** column to match against for tokens for which a column name is not explicitly
+** specified as part of the query string), or -1 if tokens may by default
+** match any table column.
+*/
+int sqlite3Fts3ExprParse(
+  sqlite3_tokenizer *pTokenizer,      /* Tokenizer module */
+  char **azCol,                       /* Array of column names for fts3 table */
+  int nCol,                           /* Number of entries in azCol[] */
+  int iDefaultCol,                    /* Default column to query */
+  const char *z, int n,               /* Text of MATCH query */
+  Fts3Expr **ppExpr                   /* OUT: Parsed query structure */
+){
+  int nParsed;
+  int rc;
+  ParseContext sParse;
+  sParse.pTokenizer = pTokenizer;
+  sParse.azCol = (const char **)azCol;
+  sParse.nCol = nCol;
+  sParse.iDefaultCol = iDefaultCol;
+  sParse.nNest = 0;
+  if( z==0 ){
+    *ppExpr = 0;
+    return SQLITE_OK;
+  }
+  if( n<0 ){
+    n = (int)strlen(z);
+  }
+  rc = fts3ExprParse(&sParse, z, n, ppExpr, &nParsed);
+
+  /* Check for mismatched parenthesis */
+  if( rc==SQLITE_OK && sParse.nNest ){
+    rc = SQLITE_ERROR;
+    sqlite3Fts3ExprFree(*ppExpr);
+    *ppExpr = 0;
+  }
+
+  return rc;
+}
+
+/*
+** Free a parsed fts3 query expression allocated by sqlite3Fts3ExprParse().
+*/
+void sqlite3Fts3ExprFree(Fts3Expr *p){
+  if( p ){
+    sqlite3Fts3ExprFree(p->pLeft);
+    sqlite3Fts3ExprFree(p->pRight);
+    sqlite3_free(p->aDoclist);
+    sqlite3_free(p);
+  }
+}
+
+/****************************************************************************
+*****************************************************************************
+** Everything after this point is just test code.
+*/
+
+#ifdef SQLITE_TEST
+
+#include <stdio.h>
+
+/*
+** Function to query the hash-table of tokenizers (see README.tokenizers).
+*/
+static int queryTestTokenizer(
+  sqlite3 *db, 
+  const char *zName,  
+  const sqlite3_tokenizer_module **pp
+){
+  int rc;
+  sqlite3_stmt *pStmt;
+  const char zSql[] = "SELECT fts3_tokenizer(?)";
+
+  *pp = 0;
+  rc = sqlite3_prepare_v2(db, zSql, -1, &pStmt, 0);
+  if( rc!=SQLITE_OK ){
+    return rc;
+  }
+
+  sqlite3_bind_text(pStmt, 1, zName, -1, SQLITE_STATIC);
+  if( SQLITE_ROW==sqlite3_step(pStmt) ){
+    if( sqlite3_column_type(pStmt, 0)==SQLITE_BLOB ){
+      memcpy((void *)pp, sqlite3_column_blob(pStmt, 0), sizeof(*pp));
+    }
+  }
+
+  return sqlite3_finalize(pStmt);
+}
+
+/*
+** Return a pointer to a buffer containing a text representation of the
+** expression passed as the first argument. The buffer is obtained from
+** sqlite3_malloc(). It is the responsibility of the caller to use 
+** sqlite3_free() to release the memory. If an OOM condition is encountered,
+** NULL is returned.
+**
+** If the second argument is not NULL, then its contents are prepended to 
+** the returned expression text and then freed using sqlite3_free().
+*/
+static char *exprToString(Fts3Expr *pExpr, char *zBuf){
+  switch( pExpr->eType ){
+    case FTSQUERY_PHRASE: {
+      Fts3Phrase *pPhrase = pExpr->pPhrase;
+      int i;
+      zBuf = sqlite3_mprintf(
+          "%zPHRASE %d %d", zBuf, pPhrase->iColumn, pPhrase->isNot);
+      for(i=0; zBuf && i<pPhrase->nToken; i++){
+        zBuf = sqlite3_mprintf("%z %.*s%s", zBuf, 
+            pPhrase->aToken[i].n, pPhrase->aToken[i].z,
+            (pPhrase->aToken[i].isPrefix?"+":"")
+        );
+      }
+      return zBuf;
+    }
+
+    case FTSQUERY_NEAR:
+      zBuf = sqlite3_mprintf("%zNEAR/%d ", zBuf, pExpr->nNear);
+      break;
+    case FTSQUERY_NOT:
+      zBuf = sqlite3_mprintf("%zNOT ", zBuf);
+      break;
+    case FTSQUERY_AND:
+      zBuf = sqlite3_mprintf("%zAND ", zBuf);
+      break;
+    case FTSQUERY_OR:
+      zBuf = sqlite3_mprintf("%zOR ", zBuf);
+      break;
+  }
+
+  if( zBuf ) zBuf = sqlite3_mprintf("%z{", zBuf);
+  if( zBuf ) zBuf = exprToString(pExpr->pLeft, zBuf);
+  if( zBuf ) zBuf = sqlite3_mprintf("%z} {", zBuf);
+
+  if( zBuf ) zBuf = exprToString(pExpr->pRight, zBuf);
+  if( zBuf ) zBuf = sqlite3_mprintf("%z}", zBuf);
+
+  return zBuf;
+}
+
+/*
+** This is the implementation of a scalar SQL function used to test the 
+** expression parser. It should be called as follows:
+**
+**   fts3_exprtest(<tokenizer>, <expr>, <column 1>, ...);
+**
+** The first argument, <tokenizer>, is the name of the fts3 tokenizer used
+** to parse the query expression (see README.tokenizers). The second argument
+** is the query expression to parse. Each subsequent argument is the name
+** of a column of the fts3 table that the query expression may refer to.
+** For example:
+**
+**   SELECT fts3_exprtest('simple', 'Bill col2:Bloggs', 'col1', 'col2');
+*/
+static void fts3ExprTest(
+  sqlite3_context *context,
+  int argc,
+  sqlite3_value **argv
+){
+  sqlite3_tokenizer_module const *pModule = 0;
+  sqlite3_tokenizer *pTokenizer = 0;
+  int rc;
+  char **azCol = 0;
+  const char *zExpr;
+  int nExpr;
+  int nCol;
+  int ii;
+  Fts3Expr *pExpr;
+  char *zBuf = 0;
+  sqlite3 *db = sqlite3_context_db_handle(context);
+
+  if( argc<3 ){
+    sqlite3_result_error(context, 
+        "Usage: fts3_exprtest(tokenizer, expr, col1, ...", -1
+    );
+    return;
+  }
+
+  rc = queryTestTokenizer(db,
+                          (const char *)sqlite3_value_text(argv[0]), &pModule);
+  if( rc==SQLITE_NOMEM ){
+    sqlite3_result_error_nomem(context);
+    goto exprtest_out;
+  }else if( !pModule ){
+    sqlite3_result_error(context, "No such tokenizer module", -1);
+    goto exprtest_out;
+  }
+
+  rc = pModule->xCreate(0, 0, &pTokenizer);
+  assert( rc==SQLITE_NOMEM || rc==SQLITE_OK );
+  if( rc==SQLITE_NOMEM ){
+    sqlite3_result_error_nomem(context);
+    goto exprtest_out;
+  }
+  pTokenizer->pModule = pModule;
+
+  zExpr = (const char *)sqlite3_value_text(argv[1]);
+  nExpr = sqlite3_value_bytes(argv[1]);
+  nCol = argc-2;
+  azCol = (char **)sqlite3_malloc(nCol*sizeof(char *));
+  if( !azCol ){
+    sqlite3_result_error_nomem(context);
+    goto exprtest_out;
+  }
+  for(ii=0; ii<nCol; ii++){
+    azCol[ii] = (char *)sqlite3_value_text(argv[ii+2]);
+  }
+
+  rc = sqlite3Fts3ExprParse(
+      pTokenizer, azCol, nCol, nCol, zExpr, nExpr, &pExpr
+  );
+  if( rc!=SQLITE_OK && rc!=SQLITE_NOMEM ){
+    sqlite3_result_error(context, "Error parsing expression", -1);
+  }else if( rc==SQLITE_NOMEM || !(zBuf = exprToString(pExpr, 0)) ){
+    sqlite3_result_error_nomem(context);
+  }else{
+    sqlite3_result_text(context, zBuf, -1, SQLITE_TRANSIENT);
+    sqlite3_free(zBuf);
+  }
+
+  sqlite3Fts3ExprFree(pExpr);
+
+exprtest_out:
+  if( pModule && pTokenizer ){
+    rc = pModule->xDestroy(pTokenizer);
+  }
+  sqlite3_free(azCol);
+}
+
+/*
+** Register the query expression parser test function fts3_exprtest() 
+** with database connection db. 
+*/
+int sqlite3Fts3ExprInitTestInterface(sqlite3* db){
+  return sqlite3_create_function(
+      db, "fts3_exprtest", -1, SQLITE_UTF8, 0, fts3ExprTest, 0, 0
+  );
+}
+
+#endif
+#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) */