Index: chromeos/compat-wireless/drivers/net/wireless/orinoco/orinoco_nortel.c |
diff --git a/chromeos/compat-wireless/drivers/net/wireless/orinoco/orinoco_nortel.c b/chromeos/compat-wireless/drivers/net/wireless/orinoco/orinoco_nortel.c |
new file mode 100644 |
index 0000000000000000000000000000000000000000..bc3ea0b67a4f8ec83eb62f283455bdf4b05034af |
--- /dev/null |
+++ b/chromeos/compat-wireless/drivers/net/wireless/orinoco/orinoco_nortel.c |
@@ -0,0 +1,323 @@ |
+/* orinoco_nortel.c |
+ * |
+ * Driver for Prism II devices which would usually be driven by orinoco_cs, |
+ * but are connected to the PCI bus by a PCI-to-PCMCIA adapter used in |
+ * Nortel emobility, Symbol LA-4113 and Symbol LA-4123. |
+ * |
+ * Copyright (C) 2002 Tobias Hoffmann |
+ * (C) 2003 Christoph Jungegger <disdos@traum404.de> |
+ * |
+ * Some of this code is borrowed from orinoco_plx.c |
+ * Copyright (C) 2001 Daniel Barlow |
+ * Some of this code is borrowed from orinoco_pci.c |
+ * Copyright (C) 2001 Jean Tourrilhes |
+ * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing |
+ * has been copied from it. linux-wlan-ng-0.1.10 is originally : |
+ * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. |
+ * |
+ * The contents of this file are subject to the Mozilla Public License |
+ * Version 1.1 (the "License"); you may not use this file except in |
+ * compliance with the License. You may obtain a copy of the License |
+ * at http://www.mozilla.org/MPL/ |
+ * |
+ * Software distributed under the License is distributed on an "AS IS" |
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See |
+ * the License for the specific language governing rights and |
+ * limitations under the License. |
+ * |
+ * Alternatively, the contents of this file may be used under the |
+ * terms of the GNU General Public License version 2 (the "GPL"), in |
+ * which case the provisions of the GPL are applicable instead of the |
+ * above. If you wish to allow the use of your version of this file |
+ * only under the terms of the GPL and not to allow others to use your |
+ * version of this file under the MPL, indicate your decision by |
+ * deleting the provisions above and replace them with the notice and |
+ * other provisions required by the GPL. If you do not delete the |
+ * provisions above, a recipient may use your version of this file |
+ * under either the MPL or the GPL. |
+ */ |
+ |
+#define DRIVER_NAME "orinoco_nortel" |
+#define PFX DRIVER_NAME ": " |
+ |
+#include <linux/module.h> |
+#include <linux/kernel.h> |
+#include <linux/init.h> |
+#include <linux/delay.h> |
+#include <linux/pci.h> |
+#include <pcmcia/cisreg.h> |
+ |
+#include "orinoco.h" |
+#include "orinoco_pci.h" |
+ |
+#define COR_OFFSET (0xe0) /* COR attribute offset of Prism2 PC card */ |
+#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */ |
+ |
+ |
+/* |
+ * Do a soft reset of the card using the Configuration Option Register |
+ * We need this to get going... |
+ * This is the part of the code that is strongly inspired from wlan-ng |
+ * |
+ * Note bis : Don't try to access HERMES_CMD during the reset phase. |
+ * It just won't work ! |
+ */ |
+static int orinoco_nortel_cor_reset(struct orinoco_private *priv) |
+{ |
+ struct orinoco_pci_card *card = priv->card; |
+ |
+ /* Assert the reset until the card notices */ |
+ iowrite16(8, card->bridge_io + 2); |
+ ioread16(card->attr_io + COR_OFFSET); |
+ iowrite16(0x80, card->attr_io + COR_OFFSET); |
+ mdelay(1); |
+ |
+ /* Give time for the card to recover from this hard effort */ |
+ iowrite16(0, card->attr_io + COR_OFFSET); |
+ iowrite16(0, card->attr_io + COR_OFFSET); |
+ mdelay(1); |
+ |
+ /* Set COR as usual */ |
+ iowrite16(COR_VALUE, card->attr_io + COR_OFFSET); |
+ iowrite16(COR_VALUE, card->attr_io + COR_OFFSET); |
+ mdelay(1); |
+ |
+ iowrite16(0x228, card->bridge_io + 2); |
+ |
+ return 0; |
+} |
+ |
+static int orinoco_nortel_hw_init(struct orinoco_pci_card *card) |
+{ |
+ int i; |
+ u32 reg; |
+ |
+ /* Setup bridge */ |
+ if (ioread16(card->bridge_io) & 1) { |
+ printk(KERN_ERR PFX "brg1 answer1 wrong\n"); |
+ return -EBUSY; |
+ } |
+ iowrite16(0x118, card->bridge_io + 2); |
+ iowrite16(0x108, card->bridge_io + 2); |
+ mdelay(30); |
+ iowrite16(0x8, card->bridge_io + 2); |
+ for (i = 0; i < 30; i++) { |
+ mdelay(30); |
+ if (ioread16(card->bridge_io) & 0x10) |
+ break; |
+ } |
+ if (i == 30) { |
+ printk(KERN_ERR PFX "brg1 timed out\n"); |
+ return -EBUSY; |
+ } |
+ if (ioread16(card->attr_io + COR_OFFSET) & 1) { |
+ printk(KERN_ERR PFX "brg2 answer1 wrong\n"); |
+ return -EBUSY; |
+ } |
+ if (ioread16(card->attr_io + COR_OFFSET + 2) & 1) { |
+ printk(KERN_ERR PFX "brg2 answer2 wrong\n"); |
+ return -EBUSY; |
+ } |
+ if (ioread16(card->attr_io + COR_OFFSET + 4) & 1) { |
+ printk(KERN_ERR PFX "brg2 answer3 wrong\n"); |
+ return -EBUSY; |
+ } |
+ |
+ /* Set the PCMCIA COR register */ |
+ iowrite16(COR_VALUE, card->attr_io + COR_OFFSET); |
+ mdelay(1); |
+ reg = ioread16(card->attr_io + COR_OFFSET); |
+ if (reg != COR_VALUE) { |
+ printk(KERN_ERR PFX "Error setting COR value (reg=%x)\n", |
+ reg); |
+ return -EBUSY; |
+ } |
+ |
+ /* Set LEDs */ |
+ iowrite16(1, card->bridge_io + 10); |
+ return 0; |
+} |
+ |
+static int orinoco_nortel_init_one(struct pci_dev *pdev, |
+ const struct pci_device_id *ent) |
+{ |
+ int err; |
+ struct orinoco_private *priv; |
+ struct orinoco_pci_card *card; |
+ void __iomem *hermes_io, *bridge_io, *attr_io; |
+ |
+ err = pci_enable_device(pdev); |
+ if (err) { |
+ printk(KERN_ERR PFX "Cannot enable PCI device\n"); |
+ return err; |
+ } |
+ |
+ err = pci_request_regions(pdev, DRIVER_NAME); |
+ if (err) { |
+ printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); |
+ goto fail_resources; |
+ } |
+ |
+ bridge_io = pci_iomap(pdev, 0, 0); |
+ if (!bridge_io) { |
+ printk(KERN_ERR PFX "Cannot map bridge registers\n"); |
+ err = -EIO; |
+ goto fail_map_bridge; |
+ } |
+ |
+ attr_io = pci_iomap(pdev, 1, 0); |
+ if (!attr_io) { |
+ printk(KERN_ERR PFX "Cannot map PCMCIA attributes\n"); |
+ err = -EIO; |
+ goto fail_map_attr; |
+ } |
+ |
+ hermes_io = pci_iomap(pdev, 2, 0); |
+ if (!hermes_io) { |
+ printk(KERN_ERR PFX "Cannot map chipset registers\n"); |
+ err = -EIO; |
+ goto fail_map_hermes; |
+ } |
+ |
+ /* Allocate network device */ |
+ priv = alloc_orinocodev(sizeof(*card), &pdev->dev, |
+ orinoco_nortel_cor_reset, NULL); |
+ if (!priv) { |
+ printk(KERN_ERR PFX "Cannot allocate network device\n"); |
+ err = -ENOMEM; |
+ goto fail_alloc; |
+ } |
+ |
+ card = priv->card; |
+ card->bridge_io = bridge_io; |
+ card->attr_io = attr_io; |
+ |
+ hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING); |
+ |
+ err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, |
+ DRIVER_NAME, priv); |
+ if (err) { |
+ printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); |
+ err = -EBUSY; |
+ goto fail_irq; |
+ } |
+ |
+ err = orinoco_nortel_hw_init(card); |
+ if (err) { |
+ printk(KERN_ERR PFX "Hardware initialization failed\n"); |
+ goto fail; |
+ } |
+ |
+ err = orinoco_nortel_cor_reset(priv); |
+ if (err) { |
+ printk(KERN_ERR PFX "Initial reset failed\n"); |
+ goto fail; |
+ } |
+ |
+ err = orinoco_init(priv); |
+ if (err) { |
+ printk(KERN_ERR PFX "orinoco_init() failed\n"); |
+ goto fail; |
+ } |
+ |
+ err = orinoco_if_add(priv, 0, 0, NULL); |
+ if (err) { |
+ printk(KERN_ERR PFX "orinoco_if_add() failed\n"); |
+ goto fail; |
+ } |
+ |
+ pci_set_drvdata(pdev, priv); |
+ |
+ return 0; |
+ |
+ fail: |
+ free_irq(pdev->irq, priv); |
+ |
+ fail_irq: |
+ pci_set_drvdata(pdev, NULL); |
+ free_orinocodev(priv); |
+ |
+ fail_alloc: |
+ pci_iounmap(pdev, hermes_io); |
+ |
+ fail_map_hermes: |
+ pci_iounmap(pdev, attr_io); |
+ |
+ fail_map_attr: |
+ pci_iounmap(pdev, bridge_io); |
+ |
+ fail_map_bridge: |
+ pci_release_regions(pdev); |
+ |
+ fail_resources: |
+ pci_disable_device(pdev); |
+ |
+ return err; |
+} |
+ |
+static void __devexit orinoco_nortel_remove_one(struct pci_dev *pdev) |
+{ |
+ struct orinoco_private *priv = pci_get_drvdata(pdev); |
+ struct orinoco_pci_card *card = priv->card; |
+ |
+ /* Clear LEDs */ |
+ iowrite16(0, card->bridge_io + 10); |
+ |
+ orinoco_if_del(priv); |
+ free_irq(pdev->irq, priv); |
+ pci_set_drvdata(pdev, NULL); |
+ free_orinocodev(priv); |
+ pci_iounmap(pdev, priv->hw.iobase); |
+ pci_iounmap(pdev, card->attr_io); |
+ pci_iounmap(pdev, card->bridge_io); |
+ pci_release_regions(pdev); |
+ pci_disable_device(pdev); |
+} |
+ |
+static DEFINE_PCI_DEVICE_TABLE(orinoco_nortel_id_table) = { |
+ /* Nortel emobility PCI */ |
+ {0x126c, 0x8030, PCI_ANY_ID, PCI_ANY_ID,}, |
+ /* Symbol LA-4123 PCI */ |
+ {0x1562, 0x0001, PCI_ANY_ID, PCI_ANY_ID,}, |
+ {0,}, |
+}; |
+ |
+MODULE_DEVICE_TABLE(pci, orinoco_nortel_id_table); |
+ |
+static struct pci_driver orinoco_nortel_driver = { |
+ .name = DRIVER_NAME, |
+ .id_table = orinoco_nortel_id_table, |
+ .probe = orinoco_nortel_init_one, |
+ .remove = __devexit_p(orinoco_nortel_remove_one), |
+ .suspend = orinoco_pci_suspend, |
+ .resume = orinoco_pci_resume, |
+}; |
+ |
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION |
+ " (Tobias Hoffmann & Christoph Jungegger <disdos@traum404.de>)"; |
+MODULE_AUTHOR("Christoph Jungegger <disdos@traum404.de>"); |
+MODULE_DESCRIPTION |
+ ("Driver for wireless LAN cards using the Nortel PCI bridge"); |
+MODULE_LICENSE("Dual MPL/GPL"); |
+ |
+static int __init orinoco_nortel_init(void) |
+{ |
+ printk(KERN_DEBUG "%s\n", version); |
+ return pci_register_driver(&orinoco_nortel_driver); |
+} |
+ |
+static void __exit orinoco_nortel_exit(void) |
+{ |
+ pci_unregister_driver(&orinoco_nortel_driver); |
+} |
+ |
+module_init(orinoco_nortel_init); |
+module_exit(orinoco_nortel_exit); |
+ |
+/* |
+ * Local variables: |
+ * c-indent-level: 8 |
+ * c-basic-offset: 8 |
+ * tab-width: 8 |
+ * End: |
+ */ |