OLD | NEW |
(Empty) | |
| 1 /* orinoco_nortel.c |
| 2 * |
| 3 * Driver for Prism II devices which would usually be driven by orinoco_cs, |
| 4 * but are connected to the PCI bus by a PCI-to-PCMCIA adapter used in |
| 5 * Nortel emobility, Symbol LA-4113 and Symbol LA-4123. |
| 6 * |
| 7 * Copyright (C) 2002 Tobias Hoffmann |
| 8 * (C) 2003 Christoph Jungegger <disdos@traum404.de> |
| 9 * |
| 10 * Some of this code is borrowed from orinoco_plx.c |
| 11 * Copyright (C) 2001 Daniel Barlow |
| 12 * Some of this code is borrowed from orinoco_pci.c |
| 13 * Copyright (C) 2001 Jean Tourrilhes |
| 14 * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing |
| 15 * has been copied from it. linux-wlan-ng-0.1.10 is originally : |
| 16 * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. |
| 17 * |
| 18 * The contents of this file are subject to the Mozilla Public License |
| 19 * Version 1.1 (the "License"); you may not use this file except in |
| 20 * compliance with the License. You may obtain a copy of the License |
| 21 * at http://www.mozilla.org/MPL/ |
| 22 * |
| 23 * Software distributed under the License is distributed on an "AS IS" |
| 24 * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See |
| 25 * the License for the specific language governing rights and |
| 26 * limitations under the License. |
| 27 * |
| 28 * Alternatively, the contents of this file may be used under the |
| 29 * terms of the GNU General Public License version 2 (the "GPL"), in |
| 30 * which case the provisions of the GPL are applicable instead of the |
| 31 * above. If you wish to allow the use of your version of this file |
| 32 * only under the terms of the GPL and not to allow others to use your |
| 33 * version of this file under the MPL, indicate your decision by |
| 34 * deleting the provisions above and replace them with the notice and |
| 35 * other provisions required by the GPL. If you do not delete the |
| 36 * provisions above, a recipient may use your version of this file |
| 37 * under either the MPL or the GPL. |
| 38 */ |
| 39 |
| 40 #define DRIVER_NAME "orinoco_nortel" |
| 41 #define PFX DRIVER_NAME ": " |
| 42 |
| 43 #include <linux/module.h> |
| 44 #include <linux/kernel.h> |
| 45 #include <linux/init.h> |
| 46 #include <linux/delay.h> |
| 47 #include <linux/pci.h> |
| 48 #include <pcmcia/cisreg.h> |
| 49 |
| 50 #include "orinoco.h" |
| 51 #include "orinoco_pci.h" |
| 52 |
| 53 #define COR_OFFSET (0xe0) /* COR attribute offset of Prism2 PC card */ |
| 54 #define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with i
nterrupt in level trigger */ |
| 55 |
| 56 |
| 57 /* |
| 58 * Do a soft reset of the card using the Configuration Option Register |
| 59 * We need this to get going... |
| 60 * This is the part of the code that is strongly inspired from wlan-ng |
| 61 * |
| 62 * Note bis : Don't try to access HERMES_CMD during the reset phase. |
| 63 * It just won't work ! |
| 64 */ |
| 65 static int orinoco_nortel_cor_reset(struct orinoco_private *priv) |
| 66 { |
| 67 struct orinoco_pci_card *card = priv->card; |
| 68 |
| 69 /* Assert the reset until the card notices */ |
| 70 iowrite16(8, card->bridge_io + 2); |
| 71 ioread16(card->attr_io + COR_OFFSET); |
| 72 iowrite16(0x80, card->attr_io + COR_OFFSET); |
| 73 mdelay(1); |
| 74 |
| 75 /* Give time for the card to recover from this hard effort */ |
| 76 iowrite16(0, card->attr_io + COR_OFFSET); |
| 77 iowrite16(0, card->attr_io + COR_OFFSET); |
| 78 mdelay(1); |
| 79 |
| 80 /* Set COR as usual */ |
| 81 iowrite16(COR_VALUE, card->attr_io + COR_OFFSET); |
| 82 iowrite16(COR_VALUE, card->attr_io + COR_OFFSET); |
| 83 mdelay(1); |
| 84 |
| 85 iowrite16(0x228, card->bridge_io + 2); |
| 86 |
| 87 return 0; |
| 88 } |
| 89 |
| 90 static int orinoco_nortel_hw_init(struct orinoco_pci_card *card) |
| 91 { |
| 92 int i; |
| 93 u32 reg; |
| 94 |
| 95 /* Setup bridge */ |
| 96 if (ioread16(card->bridge_io) & 1) { |
| 97 printk(KERN_ERR PFX "brg1 answer1 wrong\n"); |
| 98 return -EBUSY; |
| 99 } |
| 100 iowrite16(0x118, card->bridge_io + 2); |
| 101 iowrite16(0x108, card->bridge_io + 2); |
| 102 mdelay(30); |
| 103 iowrite16(0x8, card->bridge_io + 2); |
| 104 for (i = 0; i < 30; i++) { |
| 105 mdelay(30); |
| 106 if (ioread16(card->bridge_io) & 0x10) |
| 107 break; |
| 108 } |
| 109 if (i == 30) { |
| 110 printk(KERN_ERR PFX "brg1 timed out\n"); |
| 111 return -EBUSY; |
| 112 } |
| 113 if (ioread16(card->attr_io + COR_OFFSET) & 1) { |
| 114 printk(KERN_ERR PFX "brg2 answer1 wrong\n"); |
| 115 return -EBUSY; |
| 116 } |
| 117 if (ioread16(card->attr_io + COR_OFFSET + 2) & 1) { |
| 118 printk(KERN_ERR PFX "brg2 answer2 wrong\n"); |
| 119 return -EBUSY; |
| 120 } |
| 121 if (ioread16(card->attr_io + COR_OFFSET + 4) & 1) { |
| 122 printk(KERN_ERR PFX "brg2 answer3 wrong\n"); |
| 123 return -EBUSY; |
| 124 } |
| 125 |
| 126 /* Set the PCMCIA COR register */ |
| 127 iowrite16(COR_VALUE, card->attr_io + COR_OFFSET); |
| 128 mdelay(1); |
| 129 reg = ioread16(card->attr_io + COR_OFFSET); |
| 130 if (reg != COR_VALUE) { |
| 131 printk(KERN_ERR PFX "Error setting COR value (reg=%x)\n", |
| 132 reg); |
| 133 return -EBUSY; |
| 134 } |
| 135 |
| 136 /* Set LEDs */ |
| 137 iowrite16(1, card->bridge_io + 10); |
| 138 return 0; |
| 139 } |
| 140 |
| 141 static int orinoco_nortel_init_one(struct pci_dev *pdev, |
| 142 const struct pci_device_id *ent) |
| 143 { |
| 144 int err; |
| 145 struct orinoco_private *priv; |
| 146 struct orinoco_pci_card *card; |
| 147 void __iomem *hermes_io, *bridge_io, *attr_io; |
| 148 |
| 149 err = pci_enable_device(pdev); |
| 150 if (err) { |
| 151 printk(KERN_ERR PFX "Cannot enable PCI device\n"); |
| 152 return err; |
| 153 } |
| 154 |
| 155 err = pci_request_regions(pdev, DRIVER_NAME); |
| 156 if (err) { |
| 157 printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); |
| 158 goto fail_resources; |
| 159 } |
| 160 |
| 161 bridge_io = pci_iomap(pdev, 0, 0); |
| 162 if (!bridge_io) { |
| 163 printk(KERN_ERR PFX "Cannot map bridge registers\n"); |
| 164 err = -EIO; |
| 165 goto fail_map_bridge; |
| 166 } |
| 167 |
| 168 attr_io = pci_iomap(pdev, 1, 0); |
| 169 if (!attr_io) { |
| 170 printk(KERN_ERR PFX "Cannot map PCMCIA attributes\n"); |
| 171 err = -EIO; |
| 172 goto fail_map_attr; |
| 173 } |
| 174 |
| 175 hermes_io = pci_iomap(pdev, 2, 0); |
| 176 if (!hermes_io) { |
| 177 printk(KERN_ERR PFX "Cannot map chipset registers\n"); |
| 178 err = -EIO; |
| 179 goto fail_map_hermes; |
| 180 } |
| 181 |
| 182 /* Allocate network device */ |
| 183 priv = alloc_orinocodev(sizeof(*card), &pdev->dev, |
| 184 orinoco_nortel_cor_reset, NULL); |
| 185 if (!priv) { |
| 186 printk(KERN_ERR PFX "Cannot allocate network device\n"); |
| 187 err = -ENOMEM; |
| 188 goto fail_alloc; |
| 189 } |
| 190 |
| 191 card = priv->card; |
| 192 card->bridge_io = bridge_io; |
| 193 card->attr_io = attr_io; |
| 194 |
| 195 hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING); |
| 196 |
| 197 err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, |
| 198 DRIVER_NAME, priv); |
| 199 if (err) { |
| 200 printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); |
| 201 err = -EBUSY; |
| 202 goto fail_irq; |
| 203 } |
| 204 |
| 205 err = orinoco_nortel_hw_init(card); |
| 206 if (err) { |
| 207 printk(KERN_ERR PFX "Hardware initialization failed\n"); |
| 208 goto fail; |
| 209 } |
| 210 |
| 211 err = orinoco_nortel_cor_reset(priv); |
| 212 if (err) { |
| 213 printk(KERN_ERR PFX "Initial reset failed\n"); |
| 214 goto fail; |
| 215 } |
| 216 |
| 217 err = orinoco_init(priv); |
| 218 if (err) { |
| 219 printk(KERN_ERR PFX "orinoco_init() failed\n"); |
| 220 goto fail; |
| 221 } |
| 222 |
| 223 err = orinoco_if_add(priv, 0, 0, NULL); |
| 224 if (err) { |
| 225 printk(KERN_ERR PFX "orinoco_if_add() failed\n"); |
| 226 goto fail; |
| 227 } |
| 228 |
| 229 pci_set_drvdata(pdev, priv); |
| 230 |
| 231 return 0; |
| 232 |
| 233 fail: |
| 234 free_irq(pdev->irq, priv); |
| 235 |
| 236 fail_irq: |
| 237 pci_set_drvdata(pdev, NULL); |
| 238 free_orinocodev(priv); |
| 239 |
| 240 fail_alloc: |
| 241 pci_iounmap(pdev, hermes_io); |
| 242 |
| 243 fail_map_hermes: |
| 244 pci_iounmap(pdev, attr_io); |
| 245 |
| 246 fail_map_attr: |
| 247 pci_iounmap(pdev, bridge_io); |
| 248 |
| 249 fail_map_bridge: |
| 250 pci_release_regions(pdev); |
| 251 |
| 252 fail_resources: |
| 253 pci_disable_device(pdev); |
| 254 |
| 255 return err; |
| 256 } |
| 257 |
| 258 static void __devexit orinoco_nortel_remove_one(struct pci_dev *pdev) |
| 259 { |
| 260 struct orinoco_private *priv = pci_get_drvdata(pdev); |
| 261 struct orinoco_pci_card *card = priv->card; |
| 262 |
| 263 /* Clear LEDs */ |
| 264 iowrite16(0, card->bridge_io + 10); |
| 265 |
| 266 orinoco_if_del(priv); |
| 267 free_irq(pdev->irq, priv); |
| 268 pci_set_drvdata(pdev, NULL); |
| 269 free_orinocodev(priv); |
| 270 pci_iounmap(pdev, priv->hw.iobase); |
| 271 pci_iounmap(pdev, card->attr_io); |
| 272 pci_iounmap(pdev, card->bridge_io); |
| 273 pci_release_regions(pdev); |
| 274 pci_disable_device(pdev); |
| 275 } |
| 276 |
| 277 static DEFINE_PCI_DEVICE_TABLE(orinoco_nortel_id_table) = { |
| 278 /* Nortel emobility PCI */ |
| 279 {0x126c, 0x8030, PCI_ANY_ID, PCI_ANY_ID,}, |
| 280 /* Symbol LA-4123 PCI */ |
| 281 {0x1562, 0x0001, PCI_ANY_ID, PCI_ANY_ID,}, |
| 282 {0,}, |
| 283 }; |
| 284 |
| 285 MODULE_DEVICE_TABLE(pci, orinoco_nortel_id_table); |
| 286 |
| 287 static struct pci_driver orinoco_nortel_driver = { |
| 288 .name = DRIVER_NAME, |
| 289 .id_table = orinoco_nortel_id_table, |
| 290 .probe = orinoco_nortel_init_one, |
| 291 .remove = __devexit_p(orinoco_nortel_remove_one), |
| 292 .suspend = orinoco_pci_suspend, |
| 293 .resume = orinoco_pci_resume, |
| 294 }; |
| 295 |
| 296 static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION |
| 297 " (Tobias Hoffmann & Christoph Jungegger <disdos@traum404.de>)"; |
| 298 MODULE_AUTHOR("Christoph Jungegger <disdos@traum404.de>"); |
| 299 MODULE_DESCRIPTION |
| 300 ("Driver for wireless LAN cards using the Nortel PCI bridge"); |
| 301 MODULE_LICENSE("Dual MPL/GPL"); |
| 302 |
| 303 static int __init orinoco_nortel_init(void) |
| 304 { |
| 305 printk(KERN_DEBUG "%s\n", version); |
| 306 return pci_register_driver(&orinoco_nortel_driver); |
| 307 } |
| 308 |
| 309 static void __exit orinoco_nortel_exit(void) |
| 310 { |
| 311 pci_unregister_driver(&orinoco_nortel_driver); |
| 312 } |
| 313 |
| 314 module_init(orinoco_nortel_init); |
| 315 module_exit(orinoco_nortel_exit); |
| 316 |
| 317 /* |
| 318 * Local variables: |
| 319 * c-indent-level: 8 |
| 320 * c-basic-offset: 8 |
| 321 * tab-width: 8 |
| 322 * End: |
| 323 */ |
OLD | NEW |