Index: source/libvpx/third_party/googletest/src/test/gtest_output_test_golden_lin.txt |
=================================================================== |
--- source/libvpx/third_party/googletest/src/test/gtest_output_test_golden_lin.txt (revision 232233) |
+++ source/libvpx/third_party/googletest/src/test/gtest_output_test_golden_lin.txt (working copy) |
@@ -1,711 +0,0 @@ |
-The non-test part of the code is expected to have 2 failures. |
- |
-gtest_output_test_.cc:#: Failure |
-Value of: false |
- Actual: false |
-Expected: true |
-gtest_output_test_.cc:#: Failure |
-Value of: 3 |
-Expected: 2 |
-[0;32m[==========] [mRunning 62 tests from 27 test cases. |
-[0;32m[----------] [mGlobal test environment set-up. |
-FooEnvironment::SetUp() called. |
-BarEnvironment::SetUp() called. |
-[0;32m[----------] [m1 test from ADeathTest |
-[0;32m[ RUN ] [mADeathTest.ShouldRunFirst |
-[0;32m[ OK ] [mADeathTest.ShouldRunFirst |
-[0;32m[----------] [m1 test from ATypedDeathTest/0, where TypeParam = int |
-[0;32m[ RUN ] [mATypedDeathTest/0.ShouldRunFirst |
-[0;32m[ OK ] [mATypedDeathTest/0.ShouldRunFirst |
-[0;32m[----------] [m1 test from ATypedDeathTest/1, where TypeParam = double |
-[0;32m[ RUN ] [mATypedDeathTest/1.ShouldRunFirst |
-[0;32m[ OK ] [mATypedDeathTest/1.ShouldRunFirst |
-[0;32m[----------] [m1 test from My/ATypeParamDeathTest/0, where TypeParam = int |
-[0;32m[ RUN ] [mMy/ATypeParamDeathTest/0.ShouldRunFirst |
-[0;32m[ OK ] [mMy/ATypeParamDeathTest/0.ShouldRunFirst |
-[0;32m[----------] [m1 test from My/ATypeParamDeathTest/1, where TypeParam = double |
-[0;32m[ RUN ] [mMy/ATypeParamDeathTest/1.ShouldRunFirst |
-[0;32m[ OK ] [mMy/ATypeParamDeathTest/1.ShouldRunFirst |
-[0;32m[----------] [m2 tests from PassingTest |
-[0;32m[ RUN ] [mPassingTest.PassingTest1 |
-[0;32m[ OK ] [mPassingTest.PassingTest1 |
-[0;32m[ RUN ] [mPassingTest.PassingTest2 |
-[0;32m[ OK ] [mPassingTest.PassingTest2 |
-[0;32m[----------] [m3 tests from FatalFailureTest |
-[0;32m[ RUN ] [mFatalFailureTest.FatalFailureInSubroutine |
-(expecting a failure that x should be 1) |
-gtest_output_test_.cc:#: Failure |
-Value of: x |
- Actual: 2 |
-Expected: 1 |
-[0;31m[ FAILED ] [mFatalFailureTest.FatalFailureInSubroutine |
-[0;32m[ RUN ] [mFatalFailureTest.FatalFailureInNestedSubroutine |
-(expecting a failure that x should be 1) |
-gtest_output_test_.cc:#: Failure |
-Value of: x |
- Actual: 2 |
-Expected: 1 |
-[0;31m[ FAILED ] [mFatalFailureTest.FatalFailureInNestedSubroutine |
-[0;32m[ RUN ] [mFatalFailureTest.NonfatalFailureInSubroutine |
-(expecting a failure on false) |
-gtest_output_test_.cc:#: Failure |
-Value of: false |
- Actual: false |
-Expected: true |
-[0;31m[ FAILED ] [mFatalFailureTest.NonfatalFailureInSubroutine |
-[0;32m[----------] [m1 test from LoggingTest |
-[0;32m[ RUN ] [mLoggingTest.InterleavingLoggingAndAssertions |
-(expecting 2 failures on (3) >= (a[i])) |
-i == 0 |
-i == 1 |
-gtest_output_test_.cc:#: Failure |
-Expected: (3) >= (a[i]), actual: 3 vs 9 |
-i == 2 |
-i == 3 |
-gtest_output_test_.cc:#: Failure |
-Expected: (3) >= (a[i]), actual: 3 vs 6 |
-[0;31m[ FAILED ] [mLoggingTest.InterleavingLoggingAndAssertions |
-[0;32m[----------] [m6 tests from SCOPED_TRACETest |
-[0;32m[ RUN ] [mSCOPED_TRACETest.ObeysScopes |
-(expected to fail) |
-gtest_output_test_.cc:#: Failure |
-Failed |
-This failure is expected, and shouldn't have a trace. |
-gtest_output_test_.cc:#: Failure |
-Failed |
-This failure is expected, and should have a trace. |
-Google Test trace: |
-gtest_output_test_.cc:#: Expected trace |
-gtest_output_test_.cc:#: Failure |
-Failed |
-This failure is expected, and shouldn't have a trace. |
-[0;31m[ FAILED ] [mSCOPED_TRACETest.ObeysScopes |
-[0;32m[ RUN ] [mSCOPED_TRACETest.WorksInLoop |
-(expected to fail) |
-gtest_output_test_.cc:#: Failure |
-Value of: n |
- Actual: 1 |
-Expected: 2 |
-Google Test trace: |
-gtest_output_test_.cc:#: i = 1 |
-gtest_output_test_.cc:#: Failure |
-Value of: n |
- Actual: 2 |
-Expected: 1 |
-Google Test trace: |
-gtest_output_test_.cc:#: i = 2 |
-[0;31m[ FAILED ] [mSCOPED_TRACETest.WorksInLoop |
-[0;32m[ RUN ] [mSCOPED_TRACETest.WorksInSubroutine |
-(expected to fail) |
-gtest_output_test_.cc:#: Failure |
-Value of: n |
- Actual: 1 |
-Expected: 2 |
-Google Test trace: |
-gtest_output_test_.cc:#: n = 1 |
-gtest_output_test_.cc:#: Failure |
-Value of: n |
- Actual: 2 |
-Expected: 1 |
-Google Test trace: |
-gtest_output_test_.cc:#: n = 2 |
-[0;31m[ FAILED ] [mSCOPED_TRACETest.WorksInSubroutine |
-[0;32m[ RUN ] [mSCOPED_TRACETest.CanBeNested |
-(expected to fail) |
-gtest_output_test_.cc:#: Failure |
-Value of: n |
- Actual: 2 |
-Expected: 1 |
-Google Test trace: |
-gtest_output_test_.cc:#: n = 2 |
-gtest_output_test_.cc:#: |
-[0;31m[ FAILED ] [mSCOPED_TRACETest.CanBeNested |
-[0;32m[ RUN ] [mSCOPED_TRACETest.CanBeRepeated |
-(expected to fail) |
-gtest_output_test_.cc:#: Failure |
-Failed |
-This failure is expected, and should contain trace point A. |
-Google Test trace: |
-gtest_output_test_.cc:#: A |
-gtest_output_test_.cc:#: Failure |
-Failed |
-This failure is expected, and should contain trace point A and B. |
-Google Test trace: |
-gtest_output_test_.cc:#: B |
-gtest_output_test_.cc:#: A |
-gtest_output_test_.cc:#: Failure |
-Failed |
-This failure is expected, and should contain trace point A, B, and C. |
-Google Test trace: |
-gtest_output_test_.cc:#: C |
-gtest_output_test_.cc:#: B |
-gtest_output_test_.cc:#: A |
-gtest_output_test_.cc:#: Failure |
-Failed |
-This failure is expected, and should contain trace point A, B, and D. |
-Google Test trace: |
-gtest_output_test_.cc:#: D |
-gtest_output_test_.cc:#: B |
-gtest_output_test_.cc:#: A |
-[0;31m[ FAILED ] [mSCOPED_TRACETest.CanBeRepeated |
-[0;32m[ RUN ] [mSCOPED_TRACETest.WorksConcurrently |
-(expecting 6 failures) |
-gtest_output_test_.cc:#: Failure |
-Failed |
-Expected failure #1 (in thread B, only trace B alive). |
-Google Test trace: |
-gtest_output_test_.cc:#: Trace B |
-gtest_output_test_.cc:#: Failure |
-Failed |
-Expected failure #2 (in thread A, trace A & B both alive). |
-Google Test trace: |
-gtest_output_test_.cc:#: Trace A |
-gtest_output_test_.cc:#: Failure |
-Failed |
-Expected failure #3 (in thread B, trace A & B both alive). |
-Google Test trace: |
-gtest_output_test_.cc:#: Trace B |
-gtest_output_test_.cc:#: Failure |
-Failed |
-Expected failure #4 (in thread B, only trace A alive). |
-gtest_output_test_.cc:#: Failure |
-Failed |
-Expected failure #5 (in thread A, only trace A alive). |
-Google Test trace: |
-gtest_output_test_.cc:#: Trace A |
-gtest_output_test_.cc:#: Failure |
-Failed |
-Expected failure #6 (in thread A, no trace alive). |
-[0;31m[ FAILED ] [mSCOPED_TRACETest.WorksConcurrently |
-[0;32m[----------] [m1 test from NonFatalFailureInFixtureConstructorTest |
-[0;32m[ RUN ] [mNonFatalFailureInFixtureConstructorTest.FailureInConstructor |
-(expecting 5 failures) |
-gtest_output_test_.cc:#: Failure |
-Failed |
-Expected failure #1, in the test fixture c'tor. |
-gtest_output_test_.cc:#: Failure |
-Failed |
-Expected failure #2, in SetUp(). |
-gtest_output_test_.cc:#: Failure |
-Failed |
-Expected failure #3, in the test body. |
-gtest_output_test_.cc:#: Failure |
-Failed |
-Expected failure #4, in TearDown. |
-gtest_output_test_.cc:#: Failure |
-Failed |
-Expected failure #5, in the test fixture d'tor. |
-[0;31m[ FAILED ] [mNonFatalFailureInFixtureConstructorTest.FailureInConstructor |
-[0;32m[----------] [m1 test from FatalFailureInFixtureConstructorTest |
-[0;32m[ RUN ] [mFatalFailureInFixtureConstructorTest.FailureInConstructor |
-(expecting 2 failures) |
-gtest_output_test_.cc:#: Failure |
-Failed |
-Expected failure #1, in the test fixture c'tor. |
-gtest_output_test_.cc:#: Failure |
-Failed |
-Expected failure #2, in the test fixture d'tor. |
-[0;31m[ FAILED ] [mFatalFailureInFixtureConstructorTest.FailureInConstructor |
-[0;32m[----------] [m1 test from NonFatalFailureInSetUpTest |
-[0;32m[ RUN ] [mNonFatalFailureInSetUpTest.FailureInSetUp |
-(expecting 4 failures) |
-gtest_output_test_.cc:#: Failure |
-Failed |
-Expected failure #1, in SetUp(). |
-gtest_output_test_.cc:#: Failure |
-Failed |
-Expected failure #2, in the test function. |
-gtest_output_test_.cc:#: Failure |
-Failed |
-Expected failure #3, in TearDown(). |
-gtest_output_test_.cc:#: Failure |
-Failed |
-Expected failure #4, in the test fixture d'tor. |
-[0;31m[ FAILED ] [mNonFatalFailureInSetUpTest.FailureInSetUp |
-[0;32m[----------] [m1 test from FatalFailureInSetUpTest |
-[0;32m[ RUN ] [mFatalFailureInSetUpTest.FailureInSetUp |
-(expecting 3 failures) |
-gtest_output_test_.cc:#: Failure |
-Failed |
-Expected failure #1, in SetUp(). |
-gtest_output_test_.cc:#: Failure |
-Failed |
-Expected failure #2, in TearDown(). |
-gtest_output_test_.cc:#: Failure |
-Failed |
-Expected failure #3, in the test fixture d'tor. |
-[0;31m[ FAILED ] [mFatalFailureInSetUpTest.FailureInSetUp |
-[0;32m[----------] [m1 test from AddFailureAtTest |
-[0;32m[ RUN ] [mAddFailureAtTest.MessageContainsSpecifiedFileAndLineNumber |
-foo.cc:42: Failure |
-Failed |
-Expected failure in foo.cc |
-[0;31m[ FAILED ] [mAddFailureAtTest.MessageContainsSpecifiedFileAndLineNumber |
-[0;32m[----------] [m4 tests from MixedUpTestCaseTest |
-[0;32m[ RUN ] [mMixedUpTestCaseTest.FirstTestFromNamespaceFoo |
-[0;32m[ OK ] [mMixedUpTestCaseTest.FirstTestFromNamespaceFoo |
-[0;32m[ RUN ] [mMixedUpTestCaseTest.SecondTestFromNamespaceFoo |
-[0;32m[ OK ] [mMixedUpTestCaseTest.SecondTestFromNamespaceFoo |
-[0;32m[ RUN ] [mMixedUpTestCaseTest.ThisShouldFail |
-gtest.cc:#: Failure |
-Failed |
-All tests in the same test case must use the same test fixture |
-class. However, in test case MixedUpTestCaseTest, |
-you defined test FirstTestFromNamespaceFoo and test ThisShouldFail |
-using two different test fixture classes. This can happen if |
-the two classes are from different namespaces or translation |
-units and have the same name. You should probably rename one |
-of the classes to put the tests into different test cases. |
-[0;31m[ FAILED ] [mMixedUpTestCaseTest.ThisShouldFail |
-[0;32m[ RUN ] [mMixedUpTestCaseTest.ThisShouldFailToo |
-gtest.cc:#: Failure |
-Failed |
-All tests in the same test case must use the same test fixture |
-class. However, in test case MixedUpTestCaseTest, |
-you defined test FirstTestFromNamespaceFoo and test ThisShouldFailToo |
-using two different test fixture classes. This can happen if |
-the two classes are from different namespaces or translation |
-units and have the same name. You should probably rename one |
-of the classes to put the tests into different test cases. |
-[0;31m[ FAILED ] [mMixedUpTestCaseTest.ThisShouldFailToo |
-[0;32m[----------] [m2 tests from MixedUpTestCaseWithSameTestNameTest |
-[0;32m[ RUN ] [mMixedUpTestCaseWithSameTestNameTest.TheSecondTestWithThisNameShouldFail |
-[0;32m[ OK ] [mMixedUpTestCaseWithSameTestNameTest.TheSecondTestWithThisNameShouldFail |
-[0;32m[ RUN ] [mMixedUpTestCaseWithSameTestNameTest.TheSecondTestWithThisNameShouldFail |
-gtest.cc:#: Failure |
-Failed |
-All tests in the same test case must use the same test fixture |
-class. However, in test case MixedUpTestCaseWithSameTestNameTest, |
-you defined test TheSecondTestWithThisNameShouldFail and test TheSecondTestWithThisNameShouldFail |
-using two different test fixture classes. This can happen if |
-the two classes are from different namespaces or translation |
-units and have the same name. You should probably rename one |
-of the classes to put the tests into different test cases. |
-[0;31m[ FAILED ] [mMixedUpTestCaseWithSameTestNameTest.TheSecondTestWithThisNameShouldFail |
-[0;32m[----------] [m2 tests from TEST_F_before_TEST_in_same_test_case |
-[0;32m[ RUN ] [mTEST_F_before_TEST_in_same_test_case.DefinedUsingTEST_F |
-[0;32m[ OK ] [mTEST_F_before_TEST_in_same_test_case.DefinedUsingTEST_F |
-[0;32m[ RUN ] [mTEST_F_before_TEST_in_same_test_case.DefinedUsingTESTAndShouldFail |
-gtest.cc:#: Failure |
-Failed |
-All tests in the same test case must use the same test fixture |
-class, so mixing TEST_F and TEST in the same test case is |
-illegal. In test case TEST_F_before_TEST_in_same_test_case, |
-test DefinedUsingTEST_F is defined using TEST_F but |
-test DefinedUsingTESTAndShouldFail is defined using TEST. You probably |
-want to change the TEST to TEST_F or move it to another test |
-case. |
-[0;31m[ FAILED ] [mTEST_F_before_TEST_in_same_test_case.DefinedUsingTESTAndShouldFail |
-[0;32m[----------] [m2 tests from TEST_before_TEST_F_in_same_test_case |
-[0;32m[ RUN ] [mTEST_before_TEST_F_in_same_test_case.DefinedUsingTEST |
-[0;32m[ OK ] [mTEST_before_TEST_F_in_same_test_case.DefinedUsingTEST |
-[0;32m[ RUN ] [mTEST_before_TEST_F_in_same_test_case.DefinedUsingTEST_FAndShouldFail |
-gtest.cc:#: Failure |
-Failed |
-All tests in the same test case must use the same test fixture |
-class, so mixing TEST_F and TEST in the same test case is |
-illegal. In test case TEST_before_TEST_F_in_same_test_case, |
-test DefinedUsingTEST_FAndShouldFail is defined using TEST_F but |
-test DefinedUsingTEST is defined using TEST. You probably |
-want to change the TEST to TEST_F or move it to another test |
-case. |
-[0;31m[ FAILED ] [mTEST_before_TEST_F_in_same_test_case.DefinedUsingTEST_FAndShouldFail |
-[0;32m[----------] [m8 tests from ExpectNonfatalFailureTest |
-[0;32m[ RUN ] [mExpectNonfatalFailureTest.CanReferenceGlobalVariables |
-[0;32m[ OK ] [mExpectNonfatalFailureTest.CanReferenceGlobalVariables |
-[0;32m[ RUN ] [mExpectNonfatalFailureTest.CanReferenceLocalVariables |
-[0;32m[ OK ] [mExpectNonfatalFailureTest.CanReferenceLocalVariables |
-[0;32m[ RUN ] [mExpectNonfatalFailureTest.SucceedsWhenThereIsOneNonfatalFailure |
-[0;32m[ OK ] [mExpectNonfatalFailureTest.SucceedsWhenThereIsOneNonfatalFailure |
-[0;32m[ RUN ] [mExpectNonfatalFailureTest.FailsWhenThereIsNoNonfatalFailure |
-(expecting a failure) |
-gtest.cc:#: Failure |
-Expected: 1 non-fatal failure |
- Actual: 0 failures |
-[0;31m[ FAILED ] [mExpectNonfatalFailureTest.FailsWhenThereIsNoNonfatalFailure |
-[0;32m[ RUN ] [mExpectNonfatalFailureTest.FailsWhenThereAreTwoNonfatalFailures |
-(expecting a failure) |
-gtest.cc:#: Failure |
-Expected: 1 non-fatal failure |
- Actual: 2 failures |
-gtest_output_test_.cc:#: Non-fatal failure: |
-Failed |
-Expected non-fatal failure 1. |
- |
-gtest_output_test_.cc:#: Non-fatal failure: |
-Failed |
-Expected non-fatal failure 2. |
- |
-[0;31m[ FAILED ] [mExpectNonfatalFailureTest.FailsWhenThereAreTwoNonfatalFailures |
-[0;32m[ RUN ] [mExpectNonfatalFailureTest.FailsWhenThereIsOneFatalFailure |
-(expecting a failure) |
-gtest.cc:#: Failure |
-Expected: 1 non-fatal failure |
- Actual: |
-gtest_output_test_.cc:#: Fatal failure: |
-Failed |
-Expected fatal failure. |
- |
-[0;31m[ FAILED ] [mExpectNonfatalFailureTest.FailsWhenThereIsOneFatalFailure |
-[0;32m[ RUN ] [mExpectNonfatalFailureTest.FailsWhenStatementReturns |
-(expecting a failure) |
-gtest.cc:#: Failure |
-Expected: 1 non-fatal failure |
- Actual: 0 failures |
-[0;31m[ FAILED ] [mExpectNonfatalFailureTest.FailsWhenStatementReturns |
-[0;32m[ RUN ] [mExpectNonfatalFailureTest.FailsWhenStatementThrows |
-(expecting a failure) |
-gtest.cc:#: Failure |
-Expected: 1 non-fatal failure |
- Actual: 0 failures |
-[0;31m[ FAILED ] [mExpectNonfatalFailureTest.FailsWhenStatementThrows |
-[0;32m[----------] [m8 tests from ExpectFatalFailureTest |
-[0;32m[ RUN ] [mExpectFatalFailureTest.CanReferenceGlobalVariables |
-[0;32m[ OK ] [mExpectFatalFailureTest.CanReferenceGlobalVariables |
-[0;32m[ RUN ] [mExpectFatalFailureTest.CanReferenceLocalStaticVariables |
-[0;32m[ OK ] [mExpectFatalFailureTest.CanReferenceLocalStaticVariables |
-[0;32m[ RUN ] [mExpectFatalFailureTest.SucceedsWhenThereIsOneFatalFailure |
-[0;32m[ OK ] [mExpectFatalFailureTest.SucceedsWhenThereIsOneFatalFailure |
-[0;32m[ RUN ] [mExpectFatalFailureTest.FailsWhenThereIsNoFatalFailure |
-(expecting a failure) |
-gtest.cc:#: Failure |
-Expected: 1 fatal failure |
- Actual: 0 failures |
-[0;31m[ FAILED ] [mExpectFatalFailureTest.FailsWhenThereIsNoFatalFailure |
-[0;32m[ RUN ] [mExpectFatalFailureTest.FailsWhenThereAreTwoFatalFailures |
-(expecting a failure) |
-gtest.cc:#: Failure |
-Expected: 1 fatal failure |
- Actual: 2 failures |
-gtest_output_test_.cc:#: Fatal failure: |
-Failed |
-Expected fatal failure. |
- |
-gtest_output_test_.cc:#: Fatal failure: |
-Failed |
-Expected fatal failure. |
- |
-[0;31m[ FAILED ] [mExpectFatalFailureTest.FailsWhenThereAreTwoFatalFailures |
-[0;32m[ RUN ] [mExpectFatalFailureTest.FailsWhenThereIsOneNonfatalFailure |
-(expecting a failure) |
-gtest.cc:#: Failure |
-Expected: 1 fatal failure |
- Actual: |
-gtest_output_test_.cc:#: Non-fatal failure: |
-Failed |
-Expected non-fatal failure. |
- |
-[0;31m[ FAILED ] [mExpectFatalFailureTest.FailsWhenThereIsOneNonfatalFailure |
-[0;32m[ RUN ] [mExpectFatalFailureTest.FailsWhenStatementReturns |
-(expecting a failure) |
-gtest.cc:#: Failure |
-Expected: 1 fatal failure |
- Actual: 0 failures |
-[0;31m[ FAILED ] [mExpectFatalFailureTest.FailsWhenStatementReturns |
-[0;32m[ RUN ] [mExpectFatalFailureTest.FailsWhenStatementThrows |
-(expecting a failure) |
-gtest.cc:#: Failure |
-Expected: 1 fatal failure |
- Actual: 0 failures |
-[0;31m[ FAILED ] [mExpectFatalFailureTest.FailsWhenStatementThrows |
-[0;32m[----------] [m2 tests from TypedTest/0, where TypeParam = int |
-[0;32m[ RUN ] [mTypedTest/0.Success |
-[0;32m[ OK ] [mTypedTest/0.Success |
-[0;32m[ RUN ] [mTypedTest/0.Failure |
-gtest_output_test_.cc:#: Failure |
-Value of: TypeParam() |
- Actual: 0 |
-Expected: 1 |
-Expected failure |
-[0;31m[ FAILED ] [mTypedTest/0.Failure, where TypeParam = int |
-[0;32m[----------] [m2 tests from Unsigned/TypedTestP/0, where TypeParam = unsigned char |
-[0;32m[ RUN ] [mUnsigned/TypedTestP/0.Success |
-[0;32m[ OK ] [mUnsigned/TypedTestP/0.Success |
-[0;32m[ RUN ] [mUnsigned/TypedTestP/0.Failure |
-gtest_output_test_.cc:#: Failure |
-Value of: TypeParam() |
- Actual: '\0' |
-Expected: 1U |
-Which is: 1 |
-Expected failure |
-[0;31m[ FAILED ] [mUnsigned/TypedTestP/0.Failure, where TypeParam = unsigned char |
-[0;32m[----------] [m2 tests from Unsigned/TypedTestP/1, where TypeParam = unsigned int |
-[0;32m[ RUN ] [mUnsigned/TypedTestP/1.Success |
-[0;32m[ OK ] [mUnsigned/TypedTestP/1.Success |
-[0;32m[ RUN ] [mUnsigned/TypedTestP/1.Failure |
-gtest_output_test_.cc:#: Failure |
-Value of: TypeParam() |
- Actual: 0 |
-Expected: 1U |
-Which is: 1 |
-Expected failure |
-[0;31m[ FAILED ] [mUnsigned/TypedTestP/1.Failure, where TypeParam = unsigned int |
-[0;32m[----------] [m4 tests from ExpectFailureTest |
-[0;32m[ RUN ] [mExpectFailureTest.ExpectFatalFailure |
-(expecting 1 failure) |
-gtest.cc:#: Failure |
-Expected: 1 fatal failure |
- Actual: |
-gtest_output_test_.cc:#: Success: |
-Succeeded |
- |
-(expecting 1 failure) |
-gtest.cc:#: Failure |
-Expected: 1 fatal failure |
- Actual: |
-gtest_output_test_.cc:#: Non-fatal failure: |
-Failed |
-Expected non-fatal failure. |
- |
-(expecting 1 failure) |
-gtest.cc:#: Failure |
-Expected: 1 fatal failure containing "Some other fatal failure expected." |
- Actual: |
-gtest_output_test_.cc:#: Fatal failure: |
-Failed |
-Expected fatal failure. |
- |
-[0;31m[ FAILED ] [mExpectFailureTest.ExpectFatalFailure |
-[0;32m[ RUN ] [mExpectFailureTest.ExpectNonFatalFailure |
-(expecting 1 failure) |
-gtest.cc:#: Failure |
-Expected: 1 non-fatal failure |
- Actual: |
-gtest_output_test_.cc:#: Success: |
-Succeeded |
- |
-(expecting 1 failure) |
-gtest.cc:#: Failure |
-Expected: 1 non-fatal failure |
- Actual: |
-gtest_output_test_.cc:#: Fatal failure: |
-Failed |
-Expected fatal failure. |
- |
-(expecting 1 failure) |
-gtest.cc:#: Failure |
-Expected: 1 non-fatal failure containing "Some other non-fatal failure." |
- Actual: |
-gtest_output_test_.cc:#: Non-fatal failure: |
-Failed |
-Expected non-fatal failure. |
- |
-[0;31m[ FAILED ] [mExpectFailureTest.ExpectNonFatalFailure |
-[0;32m[ RUN ] [mExpectFailureTest.ExpectFatalFailureOnAllThreads |
-(expecting 1 failure) |
-gtest.cc:#: Failure |
-Expected: 1 fatal failure |
- Actual: |
-gtest_output_test_.cc:#: Success: |
-Succeeded |
- |
-(expecting 1 failure) |
-gtest.cc:#: Failure |
-Expected: 1 fatal failure |
- Actual: |
-gtest_output_test_.cc:#: Non-fatal failure: |
-Failed |
-Expected non-fatal failure. |
- |
-(expecting 1 failure) |
-gtest.cc:#: Failure |
-Expected: 1 fatal failure containing "Some other fatal failure expected." |
- Actual: |
-gtest_output_test_.cc:#: Fatal failure: |
-Failed |
-Expected fatal failure. |
- |
-[0;31m[ FAILED ] [mExpectFailureTest.ExpectFatalFailureOnAllThreads |
-[0;32m[ RUN ] [mExpectFailureTest.ExpectNonFatalFailureOnAllThreads |
-(expecting 1 failure) |
-gtest.cc:#: Failure |
-Expected: 1 non-fatal failure |
- Actual: |
-gtest_output_test_.cc:#: Success: |
-Succeeded |
- |
-(expecting 1 failure) |
-gtest.cc:#: Failure |
-Expected: 1 non-fatal failure |
- Actual: |
-gtest_output_test_.cc:#: Fatal failure: |
-Failed |
-Expected fatal failure. |
- |
-(expecting 1 failure) |
-gtest.cc:#: Failure |
-Expected: 1 non-fatal failure containing "Some other non-fatal failure." |
- Actual: |
-gtest_output_test_.cc:#: Non-fatal failure: |
-Failed |
-Expected non-fatal failure. |
- |
-[0;31m[ FAILED ] [mExpectFailureTest.ExpectNonFatalFailureOnAllThreads |
-[0;32m[----------] [m2 tests from ExpectFailureWithThreadsTest |
-[0;32m[ RUN ] [mExpectFailureWithThreadsTest.ExpectFatalFailure |
-(expecting 2 failures) |
-gtest_output_test_.cc:#: Failure |
-Failed |
-Expected fatal failure. |
-gtest.cc:#: Failure |
-Expected: 1 fatal failure |
- Actual: 0 failures |
-[0;31m[ FAILED ] [mExpectFailureWithThreadsTest.ExpectFatalFailure |
-[0;32m[ RUN ] [mExpectFailureWithThreadsTest.ExpectNonFatalFailure |
-(expecting 2 failures) |
-gtest_output_test_.cc:#: Failure |
-Failed |
-Expected non-fatal failure. |
-gtest.cc:#: Failure |
-Expected: 1 non-fatal failure |
- Actual: 0 failures |
-[0;31m[ FAILED ] [mExpectFailureWithThreadsTest.ExpectNonFatalFailure |
-[0;32m[----------] [m1 test from ScopedFakeTestPartResultReporterTest |
-[0;32m[ RUN ] [mScopedFakeTestPartResultReporterTest.InterceptOnlyCurrentThread |
-(expecting 2 failures) |
-gtest_output_test_.cc:#: Failure |
-Failed |
-Expected fatal failure. |
-gtest_output_test_.cc:#: Failure |
-Failed |
-Expected non-fatal failure. |
-[0;31m[ FAILED ] [mScopedFakeTestPartResultReporterTest.InterceptOnlyCurrentThread |
-[0;32m[----------] [m1 test from PrintingFailingParams/FailingParamTest |
-[0;32m[ RUN ] [mPrintingFailingParams/FailingParamTest.Fails/0 |
-gtest_output_test_.cc:#: Failure |
-Value of: GetParam() |
- Actual: 2 |
-Expected: 1 |
-[0;31m[ FAILED ] [mPrintingFailingParams/FailingParamTest.Fails/0, where GetParam() = 2 |
-[0;32m[----------] [mGlobal test environment tear-down |
-BarEnvironment::TearDown() called. |
-gtest_output_test_.cc:#: Failure |
-Failed |
-Expected non-fatal failure. |
-FooEnvironment::TearDown() called. |
-gtest_output_test_.cc:#: Failure |
-Failed |
-Expected fatal failure. |
-[0;32m[==========] [m62 tests from 27 test cases ran. |
-[0;32m[ PASSED ] [m21 tests. |
-[0;31m[ FAILED ] [m41 tests, listed below: |
-[0;31m[ FAILED ] [mFatalFailureTest.FatalFailureInSubroutine |
-[0;31m[ FAILED ] [mFatalFailureTest.FatalFailureInNestedSubroutine |
-[0;31m[ FAILED ] [mFatalFailureTest.NonfatalFailureInSubroutine |
-[0;31m[ FAILED ] [mLoggingTest.InterleavingLoggingAndAssertions |
-[0;31m[ FAILED ] [mSCOPED_TRACETest.ObeysScopes |
-[0;31m[ FAILED ] [mSCOPED_TRACETest.WorksInLoop |
-[0;31m[ FAILED ] [mSCOPED_TRACETest.WorksInSubroutine |
-[0;31m[ FAILED ] [mSCOPED_TRACETest.CanBeNested |
-[0;31m[ FAILED ] [mSCOPED_TRACETest.CanBeRepeated |
-[0;31m[ FAILED ] [mSCOPED_TRACETest.WorksConcurrently |
-[0;31m[ FAILED ] [mNonFatalFailureInFixtureConstructorTest.FailureInConstructor |
-[0;31m[ FAILED ] [mFatalFailureInFixtureConstructorTest.FailureInConstructor |
-[0;31m[ FAILED ] [mNonFatalFailureInSetUpTest.FailureInSetUp |
-[0;31m[ FAILED ] [mFatalFailureInSetUpTest.FailureInSetUp |
-[0;31m[ FAILED ] [mAddFailureAtTest.MessageContainsSpecifiedFileAndLineNumber |
-[0;31m[ FAILED ] [mMixedUpTestCaseTest.ThisShouldFail |
-[0;31m[ FAILED ] [mMixedUpTestCaseTest.ThisShouldFailToo |
-[0;31m[ FAILED ] [mMixedUpTestCaseWithSameTestNameTest.TheSecondTestWithThisNameShouldFail |
-[0;31m[ FAILED ] [mTEST_F_before_TEST_in_same_test_case.DefinedUsingTESTAndShouldFail |
-[0;31m[ FAILED ] [mTEST_before_TEST_F_in_same_test_case.DefinedUsingTEST_FAndShouldFail |
-[0;31m[ FAILED ] [mExpectNonfatalFailureTest.FailsWhenThereIsNoNonfatalFailure |
-[0;31m[ FAILED ] [mExpectNonfatalFailureTest.FailsWhenThereAreTwoNonfatalFailures |
-[0;31m[ FAILED ] [mExpectNonfatalFailureTest.FailsWhenThereIsOneFatalFailure |
-[0;31m[ FAILED ] [mExpectNonfatalFailureTest.FailsWhenStatementReturns |
-[0;31m[ FAILED ] [mExpectNonfatalFailureTest.FailsWhenStatementThrows |
-[0;31m[ FAILED ] [mExpectFatalFailureTest.FailsWhenThereIsNoFatalFailure |
-[0;31m[ FAILED ] [mExpectFatalFailureTest.FailsWhenThereAreTwoFatalFailures |
-[0;31m[ FAILED ] [mExpectFatalFailureTest.FailsWhenThereIsOneNonfatalFailure |
-[0;31m[ FAILED ] [mExpectFatalFailureTest.FailsWhenStatementReturns |
-[0;31m[ FAILED ] [mExpectFatalFailureTest.FailsWhenStatementThrows |
-[0;31m[ FAILED ] [mTypedTest/0.Failure, where TypeParam = int |
-[0;31m[ FAILED ] [mUnsigned/TypedTestP/0.Failure, where TypeParam = unsigned char |
-[0;31m[ FAILED ] [mUnsigned/TypedTestP/1.Failure, where TypeParam = unsigned int |
-[0;31m[ FAILED ] [mExpectFailureTest.ExpectFatalFailure |
-[0;31m[ FAILED ] [mExpectFailureTest.ExpectNonFatalFailure |
-[0;31m[ FAILED ] [mExpectFailureTest.ExpectFatalFailureOnAllThreads |
-[0;31m[ FAILED ] [mExpectFailureTest.ExpectNonFatalFailureOnAllThreads |
-[0;31m[ FAILED ] [mExpectFailureWithThreadsTest.ExpectFatalFailure |
-[0;31m[ FAILED ] [mExpectFailureWithThreadsTest.ExpectNonFatalFailure |
-[0;31m[ FAILED ] [mScopedFakeTestPartResultReporterTest.InterceptOnlyCurrentThread |
-[0;31m[ FAILED ] [mPrintingFailingParams/FailingParamTest.Fails/0, where GetParam() = 2 |
- |
-41 FAILED TESTS |
-[0;33m YOU HAVE 1 DISABLED TEST |
- |
-[mNote: Google Test filter = FatalFailureTest.*:LoggingTest.* |
-[==========] Running 4 tests from 2 test cases. |
-[----------] Global test environment set-up. |
-[----------] 3 tests from FatalFailureTest |
-[ RUN ] FatalFailureTest.FatalFailureInSubroutine |
-(expecting a failure that x should be 1) |
-gtest_output_test_.cc:#: Failure |
-Value of: x |
- Actual: 2 |
-Expected: 1 |
-[ FAILED ] FatalFailureTest.FatalFailureInSubroutine (? ms) |
-[ RUN ] FatalFailureTest.FatalFailureInNestedSubroutine |
-(expecting a failure that x should be 1) |
-gtest_output_test_.cc:#: Failure |
-Value of: x |
- Actual: 2 |
-Expected: 1 |
-[ FAILED ] FatalFailureTest.FatalFailureInNestedSubroutine (? ms) |
-[ RUN ] FatalFailureTest.NonfatalFailureInSubroutine |
-(expecting a failure on false) |
-gtest_output_test_.cc:#: Failure |
-Value of: false |
- Actual: false |
-Expected: true |
-[ FAILED ] FatalFailureTest.NonfatalFailureInSubroutine (? ms) |
-[----------] 3 tests from FatalFailureTest (? ms total) |
- |
-[----------] 1 test from LoggingTest |
-[ RUN ] LoggingTest.InterleavingLoggingAndAssertions |
-(expecting 2 failures on (3) >= (a[i])) |
-i == 0 |
-i == 1 |
-gtest_output_test_.cc:#: Failure |
-Expected: (3) >= (a[i]), actual: 3 vs 9 |
-i == 2 |
-i == 3 |
-gtest_output_test_.cc:#: Failure |
-Expected: (3) >= (a[i]), actual: 3 vs 6 |
-[ FAILED ] LoggingTest.InterleavingLoggingAndAssertions (? ms) |
-[----------] 1 test from LoggingTest (? ms total) |
- |
-[----------] Global test environment tear-down |
-[==========] 4 tests from 2 test cases ran. (? ms total) |
-[ PASSED ] 0 tests. |
-[ FAILED ] 4 tests, listed below: |
-[ FAILED ] FatalFailureTest.FatalFailureInSubroutine |
-[ FAILED ] FatalFailureTest.FatalFailureInNestedSubroutine |
-[ FAILED ] FatalFailureTest.NonfatalFailureInSubroutine |
-[ FAILED ] LoggingTest.InterleavingLoggingAndAssertions |
- |
- 4 FAILED TESTS |
- YOU HAVE 1 DISABLED TEST |
- |
-Note: Google Test filter = *DISABLED_* |
-[==========] Running 1 test from 1 test case. |
-[----------] Global test environment set-up. |
-[----------] 1 test from DisabledTestsWarningTest |
-[ RUN ] DisabledTestsWarningTest.DISABLED_AlsoRunDisabledTestsFlagSuppressesWarning |
-[ OK ] DisabledTestsWarningTest.DISABLED_AlsoRunDisabledTestsFlagSuppressesWarning |
-[----------] Global test environment tear-down |
-[==========] 1 test from 1 test case ran. |
-[ PASSED ] 1 test. |
-Note: Google Test filter = PassingTest.* |
-Note: This is test shard 2 of 2. |
-[==========] Running 1 test from 1 test case. |
-[----------] Global test environment set-up. |
-[----------] 1 test from PassingTest |
-[ RUN ] PassingTest.PassingTest2 |
-[ OK ] PassingTest.PassingTest2 |
-[----------] Global test environment tear-down |
-[==========] 1 test from 1 test case ran. |
-[ PASSED ] 1 test. |
- |
- YOU HAVE 1 DISABLED TEST |
- |