Revert 23028 - "MIPS: Add support for arch. revision 6 to mips32 port."

src/mips/constants-mips.h

 // Copyright 2012 the V8 project authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 
 #ifndef  V8_MIPS_CONSTANTS_H_
 #define  V8_MIPS_CONSTANTS_H_
-#include "src/globals.h"
+
 // UNIMPLEMENTED_ macro for MIPS.
 #ifdef DEBUG
 #define UNIMPLEMENTED_MIPS()                                                  \
   v8::internal::PrintF("%s, \tline %d: \tfunction %s not implemented. \n",    \
                        __FILE__, __LINE__, __func__)
 #else
 #define UNIMPLEMENTED_MIPS()
 #endif
 
 #define UNSUPPORTED_MIPS() v8::internal::PrintF("Unsupported instruction.\n")
 
 enum ArchVariants {
-  kMips32r1 = v8::internal::MIPSr1,
-  kMips32r2 = v8::internal::MIPSr2,
-  kMips32r6 = v8::internal::MIPSr6,
+  kMips32r2,
+  kMips32r1,
   kLoongson
 };
 
 #ifdef _MIPS_ARCH_MIPS32R2
   static const ArchVariants kArchVariant = kMips32r2;
-#elif _MIPS_ARCH_MIPS32R6
-  static const ArchVariants kArchVariant = kMips32r6;
 #elif _MIPS_ARCH_LOONGSON
 // The loongson flag refers to the LOONGSON architectures based on MIPS-III,
 // which predates (and is a subset of) the mips32r2 and r1 architectures.
   static const ArchVariants kArchVariant = kLoongson;
-#elif _MIPS_ARCH_MIPS32RX
-// This flags referred to compatibility mode that creates universal code that
-// can run on any MIPS32 architecture revision. The dynamically generated code
-// by v8 is specialized for the MIPS host detected in runtime probing.
-  static const ArchVariants kArchVariant = kMips32r1;
 #else
   static const ArchVariants kArchVariant = kMips32r1;
 #endif
 
 enum Endianness {
   kLittle,
   kBig
 };
 
 #if defined(V8_TARGET_LITTLE_ENDIAN)
   static const Endianness kArchEndian = kLittle;
 #elif defined(V8_TARGET_BIG_ENDIAN)
   static const Endianness kArchEndian = kBig;
 #else
 #error Unknown endianness
 #endif
 
-enum FpuMode {
-  kFP32,
-  kFP64,
-  kFPXX
-};
-
-#if defined(FPU_MODE_FP32)
-  static const FpuMode kFpuMode = kFP32;
-#elif defined(FPU_MODE_FP64)
-  static const FpuMode kFpuMode = kFP64;
-#elif defined(FPU_MODE_FPXX)
-  static const FpuMode kFpuMode = kFPXX;
-#else
-  static const FpuMode kFpuMode = kFP32;
-#endif
-
 #if(defined(__mips_hard_float) && __mips_hard_float != 0)
 // Use floating-point coprocessor instructions. This flag is raised when
 // -mhard-float is passed to the compiler.
 const bool IsMipsSoftFloatABI = false;
 #elif(defined(__mips_soft_float) && __mips_soft_float != 0)
 // This flag is raised when -msoft-float is passed to the compiler.
 // Although FPU is a base requirement for v8, soft-float ABI is used
 // on soft-float systems with FPU kernel emulation.
 const bool IsMipsSoftFloatABI = true;
 #else
 const bool IsMipsSoftFloatABI = true;
 #endif
 
 #if defined(V8_TARGET_LITTLE_ENDIAN)
 const uint32_t kHoleNanUpper32Offset = 4;
 const uint32_t kHoleNanLower32Offset = 0;
 #elif defined(V8_TARGET_BIG_ENDIAN)
 const uint32_t kHoleNanUpper32Offset = 0;
 const uint32_t kHoleNanLower32Offset = 4;
 #else
 #error Unknown endianness
 #endif
 
-#ifndef FPU_MODE_FPXX
-#define IsFp64Mode() \
-  (kFpuMode == kFP64)
-#else
-#define IsFp64Mode() \
-  (CpuFeatures::IsSupported(FP64))
-#endif
-
-#ifndef _MIPS_ARCH_MIPS32RX
-#define IsMipsArchVariant(check) \
-  (kArchVariant == check)
-#else
-#define IsMipsArchVariant(check) \
-  (CpuFeatures::IsSupported(check))
-#endif
-
-
-#define __STDC_FORMAT_MACROS
-#include <inttypes.h>
-
 // Defines constants and accessor classes to assemble, disassemble and
 // simulate MIPS32 instructions.
 //
 // See: MIPS32 Architecture For Programmers
 //      Volume II: The MIPS32 Instruction Set
 // Try www.cs.cornell.edu/courses/cs3410/2008fa/MIPS_Vol2.pdf.
 
 namespace v8 {
 namespace internal {
 
@@ skipping 11 matching lines @@
 const int kPCRegister = 34;
 
 // Number coprocessor registers.
 const int kNumFPURegisters = 32;
 const int kInvalidFPURegister = -1;
 
 // FPU (coprocessor 1) control registers. Currently only FCSR is implemented.
 const int kFCSRRegister = 31;
 const int kInvalidFPUControlRegister = -1;
 const uint32_t kFPUInvalidResult = static_cast<uint32_t>(1 << 31) - 1;
-const uint64_t kFPU64InvalidResult =
-    static_cast<uint64_t>(static_cast<uint64_t>(1) << 63) - 1;
 
 // FCSR constants.
 const uint32_t kFCSRInexactFlagBit = 2;
 const uint32_t kFCSRUnderflowFlagBit = 3;
 const uint32_t kFCSROverflowFlagBit = 4;
 const uint32_t kFCSRDivideByZeroFlagBit = 5;
 const uint32_t kFCSRInvalidOpFlagBit = 6;
 
 const uint32_t kFCSRInexactFlagMask = 1 << kFCSRInexactFlagBit;
 const uint32_t kFCSRUnderflowFlagMask = 1 << kFCSRUnderflowFlagBit;
@@ skipping 97 matching lines @@
 const int kRdShift       = 11;
 const int kRdBits        = 5;
 const int kSaShift       = 6;
 const int kSaBits        = 5;
 const int kFunctionShift = 0;
 const int kFunctionBits  = 6;
 const int kLuiShift      = 16;
 
 const int kImm16Shift = 0;
 const int kImm16Bits  = 16;
-const int kImm21Shift = 0;
-const int kImm21Bits  = 21;
 const int kImm26Shift = 0;
 const int kImm26Bits  = 26;
 const int kImm28Shift = 0;
 const int kImm28Bits  = 28;
-const int kImm32Shift = 0;
-const int kImm32Bits  = 32;
 
 // In branches and jumps immediate fields point to words, not bytes,
 // and are therefore shifted by 2.
 const int kImmFieldShift = 2;
 
 const int kFrBits        = 5;
 const int kFrShift       = 21;
 const int kFsShift       = 11;
 const int kFsBits        = 5;
 const int kFtShift       = 16;
@@ skipping 38 matching lines @@
   BLEZ      =   ((0 << 3) + 6) << kOpcodeShift,
   BGTZ      =   ((0 << 3) + 7) << kOpcodeShift,
 
   ADDI      =   ((1 << 3) + 0) << kOpcodeShift,
   ADDIU     =   ((1 << 3) + 1) << kOpcodeShift,
   SLTI      =   ((1 << 3) + 2) << kOpcodeShift,
   SLTIU     =   ((1 << 3) + 3) << kOpcodeShift,
   ANDI      =   ((1 << 3) + 4) << kOpcodeShift,
   ORI       =   ((1 << 3) + 5) << kOpcodeShift,
   XORI      =   ((1 << 3) + 6) << kOpcodeShift,
-  LUI       =   ((1 << 3) + 7) << kOpcodeShift,  // LUI/AUI family.
+  LUI       =   ((1 << 3) + 7) << kOpcodeShift,
 
-  BEQC      =   ((2 << 3) + 0) << kOpcodeShift,
   COP1      =   ((2 << 3) + 1) << kOpcodeShift,  // Coprocessor 1 class.
   BEQL      =   ((2 << 3) + 4) << kOpcodeShift,
   BNEL      =   ((2 << 3) + 5) << kOpcodeShift,
   BLEZL     =   ((2 << 3) + 6) << kOpcodeShift,
   BGTZL     =   ((2 << 3) + 7) << kOpcodeShift,
 
-  DADDI     =   ((3 << 3) + 0) << kOpcodeShift,  // This is also BNEC.
   SPECIAL2  =   ((3 << 3) + 4) << kOpcodeShift,
   SPECIAL3  =   ((3 << 3) + 7) << kOpcodeShift,
 
   LB        =   ((4 << 3) + 0) << kOpcodeShift,
   LH        =   ((4 << 3) + 1) << kOpcodeShift,
   LWL       =   ((4 << 3) + 2) << kOpcodeShift,
   LW        =   ((4 << 3) + 3) << kOpcodeShift,
   LBU       =   ((4 << 3) + 4) << kOpcodeShift,
   LHU       =   ((4 << 3) + 5) << kOpcodeShift,
   LWR       =   ((4 << 3) + 6) << kOpcodeShift,
   SB        =   ((5 << 3) + 0) << kOpcodeShift,
   SH        =   ((5 << 3) + 1) << kOpcodeShift,
   SWL       =   ((5 << 3) + 2) << kOpcodeShift,
   SW        =   ((5 << 3) + 3) << kOpcodeShift,
   SWR       =   ((5 << 3) + 6) << kOpcodeShift,
 
   LWC1      =   ((6 << 3) + 1) << kOpcodeShift,
   LDC1      =   ((6 << 3) + 5) << kOpcodeShift,
-  BEQZC     =   ((6 << 3) + 6) << kOpcodeShift,
 
   PREF      =   ((6 << 3) + 3) << kOpcodeShift,
 
   SWC1      =   ((7 << 3) + 1) << kOpcodeShift,
   SDC1      =   ((7 << 3) + 5) << kOpcodeShift,
-  BNEZC     =   ((7 << 3) + 6) << kOpcodeShift,
 
   COP1X     =   ((1 << 4) + 3) << kOpcodeShift
 };
 
 enum SecondaryField {
   // SPECIAL Encoding of Function Field.
   SLL       =   ((0 << 3) + 0),
   MOVCI     =   ((0 << 3) + 1),
   SRL       =   ((0 << 3) + 2),
   SRA       =   ((0 << 3) + 3),
   SLLV      =   ((0 << 3) + 4),
   SRLV      =   ((0 << 3) + 6),
   SRAV      =   ((0 << 3) + 7),
 
   JR        =   ((1 << 3) + 0),
   JALR      =   ((1 << 3) + 1),
   MOVZ      =   ((1 << 3) + 2),
   MOVN      =   ((1 << 3) + 3),
   BREAK     =   ((1 << 3) + 5),
 
   MFHI      =   ((2 << 3) + 0),
-  CLZ_R6    =   ((2 << 3) + 0),
-  CLO_R6    =   ((2 << 3) + 1),
   MFLO      =   ((2 << 3) + 2),
 
   MULT      =   ((3 << 3) + 0),
   MULTU     =   ((3 << 3) + 1),
   DIV       =   ((3 << 3) + 2),
   DIVU      =   ((3 << 3) + 3),
 
   ADD       =   ((4 << 3) + 0),
   ADDU      =   ((4 << 3) + 1),
   SUB       =   ((4 << 3) + 2),
   SUBU      =   ((4 << 3) + 3),
   AND       =   ((4 << 3) + 4),
   OR        =   ((4 << 3) + 5),
   XOR       =   ((4 << 3) + 6),
   NOR       =   ((4 << 3) + 7),
 
   SLT       =   ((5 << 3) + 2),
   SLTU      =   ((5 << 3) + 3),
 
   TGE       =   ((6 << 3) + 0),
   TGEU      =   ((6 << 3) + 1),
   TLT       =   ((6 << 3) + 2),
   TLTU      =   ((6 << 3) + 3),
   TEQ       =   ((6 << 3) + 4),
-  SELEQZ_S  =   ((6 << 3) + 5),
   TNE       =   ((6 << 3) + 6),
-  SELNEZ_S  =   ((6 << 3) + 7),
-
-  // Multiply integers in r6.
-  MUL_MUH   =   ((3 << 3) + 0),  // MUL, MUH.
-  MUL_MUH_U =   ((3 << 3) + 1),  // MUL_U, MUH_U.
-
-  MUL_OP    =   ((0 << 3) + 2),
-  MUH_OP    =   ((0 << 3) + 3),
-  DIV_OP    =   ((0 << 3) + 2),
-  MOD_OP    =   ((0 << 3) + 3),
-
-  DIV_MOD   =   ((3 << 3) + 2),
-  DIV_MOD_U =   ((3 << 3) + 3),
 
   // SPECIAL2 Encoding of Function Field.
   MUL       =   ((0 << 3) + 2),
   CLZ       =   ((4 << 3) + 0),
   CLO       =   ((4 << 3) + 1),
 
   // SPECIAL3 Encoding of Function Field.
   EXT       =   ((0 << 3) + 0),
   INS       =   ((0 << 3) + 4),
 
   // REGIMM  encoding of rt Field.
   BLTZ      =   ((0 << 3) + 0) << 16,
   BGEZ      =   ((0 << 3) + 1) << 16,
   BLTZAL    =   ((2 << 3) + 0) << 16,
   BGEZAL    =   ((2 << 3) + 1) << 16,
-  BGEZALL   =   ((2 << 3) + 3) << 16,
 
   // COP1 Encoding of rs Field.
   MFC1      =   ((0 << 3) + 0) << 21,
   CFC1      =   ((0 << 3) + 2) << 21,
   MFHC1     =   ((0 << 3) + 3) << 21,
   MTC1      =   ((0 << 3) + 4) << 21,
   CTC1      =   ((0 << 3) + 6) << 21,
   MTHC1     =   ((0 << 3) + 7) << 21,
   BC1       =   ((1 << 3) + 0) << 21,
   S         =   ((2 << 3) + 0) << 21,
@@ skipping 24 matching lines @@
   MOV_D     =   ((0 << 3) + 6),
   NEG_D     =   ((0 << 3) + 7),
   ROUND_L_D =   ((1 << 3) + 0),
   TRUNC_L_D =   ((1 << 3) + 1),
   CEIL_L_D  =   ((1 << 3) + 2),
   FLOOR_L_D =   ((1 << 3) + 3),
   ROUND_W_D =   ((1 << 3) + 4),
   TRUNC_W_D =   ((1 << 3) + 5),
   CEIL_W_D  =   ((1 << 3) + 6),
   FLOOR_W_D =   ((1 << 3) + 7),
-  MIN       =   ((3 << 3) + 4),
-  MINA      =   ((3 << 3) + 5),
-  MAX       =   ((3 << 3) + 6),
-  MAXA      =   ((3 << 3) + 7),
   CVT_S_D   =   ((4 << 3) + 0),
   CVT_W_D   =   ((4 << 3) + 4),
   CVT_L_D   =   ((4 << 3) + 5),
   C_F_D     =   ((6 << 3) + 0),
   C_UN_D    =   ((6 << 3) + 1),
   C_EQ_D    =   ((6 << 3) + 2),
   C_UEQ_D   =   ((6 << 3) + 3),
   C_OLT_D   =   ((6 << 3) + 4),
   C_ULT_D   =   ((6 << 3) + 5),
   C_OLE_D   =   ((6 << 3) + 6),
   C_ULE_D   =   ((6 << 3) + 7),
   // COP1 Encoding of Function Field When rs=W or L.
   CVT_S_W   =   ((4 << 3) + 0),
   CVT_D_W   =   ((4 << 3) + 1),
   CVT_S_L   =   ((4 << 3) + 0),
   CVT_D_L   =   ((4 << 3) + 1),
-  BC1EQZ    =   ((2 << 2) + 1) << 21,
-  BC1NEZ    =   ((3 << 2) + 1) << 21,
-  // COP1 CMP positive predicates Bit 5..4 = 00.
-  CMP_AF    =   ((0 << 3) + 0),
-  CMP_UN    =   ((0 << 3) + 1),
-  CMP_EQ    =   ((0 << 3) + 2),
-  CMP_UEQ   =   ((0 << 3) + 3),
-  CMP_LT    =   ((0 << 3) + 4),
-  CMP_ULT   =   ((0 << 3) + 5),
-  CMP_LE    =   ((0 << 3) + 6),
-  CMP_ULE   =   ((0 << 3) + 7),
-  CMP_SAF   =   ((1 << 3) + 0),
-  CMP_SUN   =   ((1 << 3) + 1),
-  CMP_SEQ   =   ((1 << 3) + 2),
-  CMP_SUEQ  =   ((1 << 3) + 3),
-  CMP_SSLT  =   ((1 << 3) + 4),
-  CMP_SSULT =   ((1 << 3) + 5),
-  CMP_SLE   =   ((1 << 3) + 6),
-  CMP_SULE  =   ((1 << 3) + 7),
-  // COP1 CMP negative predicates Bit 5..4 = 01.
-  CMP_AT    =   ((2 << 3) + 0),  // Reserved, not implemented.
-  CMP_OR    =   ((2 << 3) + 1),
-  CMP_UNE   =   ((2 << 3) + 2),
-  CMP_NE    =   ((2 << 3) + 3),
-  CMP_UGE   =   ((2 << 3) + 4),  // Reserved, not implemented.
-  CMP_OGE   =   ((2 << 3) + 5),  // Reserved, not implemented.
-  CMP_UGT   =   ((2 << 3) + 6),  // Reserved, not implemented.
-  CMP_OGT   =   ((2 << 3) + 7),  // Reserved, not implemented.
-  CMP_SAT   =   ((3 << 3) + 0),  // Reserved, not implemented.
-  CMP_SOR   =   ((3 << 3) + 1),
-  CMP_SUNE  =   ((3 << 3) + 2),
-  CMP_SNE   =   ((3 << 3) + 3),
-  CMP_SUGE  =   ((3 << 3) + 4),  // Reserved, not implemented.
-  CMP_SOGE  =   ((3 << 3) + 5),  // Reserved, not implemented.
-  CMP_SUGT  =   ((3 << 3) + 6),  // Reserved, not implemented.
-  CMP_SOGT  =   ((3 << 3) + 7),  // Reserved, not implemented.
-
-  SEL       =   ((2 << 3) + 0),
-  SELEQZ_C  =   ((2 << 3) + 4),  // COP1 on FPR registers.
-  SELNEZ_C  =   ((2 << 3) + 7),  // COP1 on FPR registers.
   // COP1 Encoding of Function Field When rs=PS.
   // COP1X Encoding of Function Field.
   MADD_D    =   ((4 << 3) + 1),
 
   NULLSF    =   0
 };
 
 
 // ----- Emulated conditions.
 // On MIPS we use this enum to abstract from conditionnal branch instructions.
@@ skipping 325 matching lines @@
       default:
         return NULLSF;
     }
   }
 
   inline int32_t Imm16Value() const {
     DCHECK(InstructionType() == kImmediateType);
     return Bits(kImm16Shift + kImm16Bits - 1, kImm16Shift);
   }
 
-  inline int32_t Imm21Value() const {
-    DCHECK(InstructionType() == kImmediateType);
-    return Bits(kImm21Shift + kImm21Bits - 1, kImm21Shift);
-  }
-
   inline int32_t Imm26Value() const {
     DCHECK(InstructionType() == kJumpType);
     return Bits(kImm26Shift + kImm26Bits - 1, kImm26Shift);
   }
 
   // Say if the instruction should not be used in a branch delay slot.
   bool IsForbiddenInBranchDelay() const;
   // Say if the instruction 'links'. e.g. jal, bal.
   bool IsLinkingInstruction() const;
   // Say if the instruction is a break or a trap.
@@ skipping 22 matching lines @@
 // JS argument slots size.
 const int kJSArgsSlotsSize = 0 * Instruction::kInstrSize;
 // Assembly builtins argument slots size.
 const int kBArgsSlotsSize = 0 * Instruction::kInstrSize;
 
 const int kBranchReturnOffset = 2 * Instruction::kInstrSize;
 
 } }   // namespace v8::internal
 
 #endif    // #ifndef V8_MIPS_CONSTANTS_H_