Index: source/libvpx/third_party/libyuv/source/row_mips.cc |
=================================================================== |
--- source/libvpx/third_party/libyuv/source/row_mips.cc (revision 0) |
+++ source/libvpx/third_party/libyuv/source/row_mips.cc (revision 0) |
@@ -0,0 +1,991 @@ |
+/* |
+ * Copyright (c) 2012 The LibYuv project authors. All Rights Reserved. |
+ * |
+ * Use of this source code is governed by a BSD-style license |
+ * that can be found in the LICENSE file in the root of the source |
+ * tree. An additional intellectual property rights grant can be found |
+ * in the file PATENTS. All contributing project authors may |
+ * be found in the AUTHORS file in the root of the source tree. |
+ */ |
+ |
+#include "third_party/libyuv/include/libyuv/row.h" |
+ |
+#ifdef __cplusplus |
+namespace libyuv { |
+extern "C" { |
+#endif |
+ |
+// The following are available on Mips platforms: |
+#if !defined(LIBYUV_DISABLE_MIPS) && defined(__mips__) |
+ |
+#ifdef HAS_COPYROW_MIPS |
+void CopyRow_MIPS(const uint8* src, uint8* dst, int count) { |
+ __asm__ __volatile__ ( |
+ ".set noreorder \n" |
+ ".set noat \n" |
+ "slti $at, %[count], 8 \n" |
+ "bne $at ,$zero, $last8 \n" |
+ "xor $t8, %[src], %[dst] \n" |
+ "andi $t8, $t8, 0x3 \n" |
+ |
+ "bne $t8, $zero, unaligned \n" |
+ "negu $a3, %[dst] \n" |
+ // make dst/src aligned |
+ "andi $a3, $a3, 0x3 \n" |
+ "beq $a3, $zero, $chk16w \n" |
+ // word-aligned now count is the remining bytes count |
+ "subu %[count], %[count], $a3 \n" |
+ |
+ "lwr $t8, 0(%[src]) \n" |
+ "addu %[src], %[src], $a3 \n" |
+ "swr $t8, 0(%[dst]) \n" |
+ "addu %[dst], %[dst], $a3 \n" |
+ |
+ // Now the dst/src are mutually word-aligned with word-aligned addresses |
+ "$chk16w: \n" |
+ "andi $t8, %[count], 0x3f \n" // whole 64-B chunks? |
+ // t8 is the byte count after 64-byte chunks |
+ "beq %[count], $t8, chk8w \n" |
+ // There will be at most 1 32-byte chunk after it |
+ "subu $a3, %[count], $t8 \n" // the reminder |
+ // Here a3 counts bytes in 16w chunks |
+ "addu $a3, %[dst], $a3 \n" |
+ // Now a3 is the final dst after 64-byte chunks |
+ "addu $t0, %[dst], %[count] \n" |
+ // t0 is the "past the end" address |
+ |
+ // When in the loop we exercise "pref 30,x(a1)", the a1+x should not be past |
+ // the "t0-32" address |
+ // This means: for x=128 the last "safe" a1 address is "t0-160" |
+ // Alternatively, for x=64 the last "safe" a1 address is "t0-96" |
+ // we will use "pref 30,128(a1)", so "t0-160" is the limit |
+ "subu $t9, $t0, 160 \n" |
+ // t9 is the "last safe pref 30,128(a1)" address |
+ "pref 0, 0(%[src]) \n" // first line of src |
+ "pref 0, 32(%[src]) \n" // second line of src |
+ "pref 0, 64(%[src]) \n" |
+ "pref 30, 32(%[dst]) \n" |
+ // In case the a1 > t9 don't use "pref 30" at all |
+ "sgtu $v1, %[dst], $t9 \n" |
+ "bgtz $v1, $loop16w \n" |
+ "nop \n" |
+ // otherwise, start with using pref30 |
+ "pref 30, 64(%[dst]) \n" |
+ "$loop16w: \n" |
+ "pref 0, 96(%[src]) \n" |
+ "lw $t0, 0(%[src]) \n" |
+ "bgtz $v1, $skip_pref30_96 \n" // skip |
+ "lw $t1, 4(%[src]) \n" |
+ "pref 30, 96(%[dst]) \n" // continue |
+ "$skip_pref30_96: \n" |
+ "lw $t2, 8(%[src]) \n" |
+ "lw $t3, 12(%[src]) \n" |
+ "lw $t4, 16(%[src]) \n" |
+ "lw $t5, 20(%[src]) \n" |
+ "lw $t6, 24(%[src]) \n" |
+ "lw $t7, 28(%[src]) \n" |
+ "pref 0, 128(%[src]) \n" |
+ // bring the next lines of src, addr 128 |
+ "sw $t0, 0(%[dst]) \n" |
+ "sw $t1, 4(%[dst]) \n" |
+ "sw $t2, 8(%[dst]) \n" |
+ "sw $t3, 12(%[dst]) \n" |
+ "sw $t4, 16(%[dst]) \n" |
+ "sw $t5, 20(%[dst]) \n" |
+ "sw $t6, 24(%[dst]) \n" |
+ "sw $t7, 28(%[dst]) \n" |
+ "lw $t0, 32(%[src]) \n" |
+ "bgtz $v1, $skip_pref30_128 \n" // skip pref 30,128(a1) |
+ "lw $t1, 36(%[src]) \n" |
+ "pref 30, 128(%[dst]) \n" // set dest, addr 128 |
+ "$skip_pref30_128: \n" |
+ "lw $t2, 40(%[src]) \n" |
+ "lw $t3, 44(%[src]) \n" |
+ "lw $t4, 48(%[src]) \n" |
+ "lw $t5, 52(%[src]) \n" |
+ "lw $t6, 56(%[src]) \n" |
+ "lw $t7, 60(%[src]) \n" |
+ "pref 0, 160(%[src]) \n" |
+ // bring the next lines of src, addr 160 |
+ "sw $t0, 32(%[dst]) \n" |
+ "sw $t1, 36(%[dst]) \n" |
+ "sw $t2, 40(%[dst]) \n" |
+ "sw $t3, 44(%[dst]) \n" |
+ "sw $t4, 48(%[dst]) \n" |
+ "sw $t5, 52(%[dst]) \n" |
+ "sw $t6, 56(%[dst]) \n" |
+ "sw $t7, 60(%[dst]) \n" |
+ |
+ "addiu %[dst], %[dst], 64 \n" // adding 64 to dest |
+ "sgtu $v1, %[dst], $t9 \n" |
+ "bne %[dst], $a3, $loop16w \n" |
+ " addiu %[src], %[src], 64 \n" // adding 64 to src |
+ "move %[count], $t8 \n" |
+ |
+ // Here we have src and dest word-aligned but less than 64-bytes to go |
+ |
+ "chk8w: \n" |
+ "pref 0, 0x0(%[src]) \n" |
+ "andi $t8, %[count], 0x1f \n" // 32-byte chunk? |
+ // the t8 is the reminder count past 32-bytes |
+ "beq %[count], $t8, chk1w \n" |
+ // count=t8,no 32-byte chunk |
+ " nop \n" |
+ |
+ "lw $t0, 0(%[src]) \n" |
+ "lw $t1, 4(%[src]) \n" |
+ "lw $t2, 8(%[src]) \n" |
+ "lw $t3, 12(%[src]) \n" |
+ "lw $t4, 16(%[src]) \n" |
+ "lw $t5, 20(%[src]) \n" |
+ "lw $t6, 24(%[src]) \n" |
+ "lw $t7, 28(%[src]) \n" |
+ "addiu %[src], %[src], 32 \n" |
+ |
+ "sw $t0, 0(%[dst]) \n" |
+ "sw $t1, 4(%[dst]) \n" |
+ "sw $t2, 8(%[dst]) \n" |
+ "sw $t3, 12(%[dst]) \n" |
+ "sw $t4, 16(%[dst]) \n" |
+ "sw $t5, 20(%[dst]) \n" |
+ "sw $t6, 24(%[dst]) \n" |
+ "sw $t7, 28(%[dst]) \n" |
+ "addiu %[dst], %[dst], 32 \n" |
+ |
+ "chk1w: \n" |
+ "andi %[count], $t8, 0x3 \n" |
+ // now count is the reminder past 1w chunks |
+ "beq %[count], $t8, $last8 \n" |
+ " subu $a3, $t8, %[count] \n" |
+ // a3 is count of bytes in 1w chunks |
+ "addu $a3, %[dst], $a3 \n" |
+ // now a3 is the dst address past the 1w chunks |
+ // copying in words (4-byte chunks) |
+ "$wordCopy_loop: \n" |
+ "lw $t3, 0(%[src]) \n" |
+ // the first t3 may be equal t0 ... optimize? |
+ "addiu %[src], %[src],4 \n" |
+ "addiu %[dst], %[dst],4 \n" |
+ "bne %[dst], $a3,$wordCopy_loop \n" |
+ " sw $t3, -4(%[dst]) \n" |
+ |
+ // For the last (<8) bytes |
+ "$last8: \n" |
+ "blez %[count], leave \n" |
+ " addu $a3, %[dst], %[count] \n" // a3 -last dst address |
+ "$last8loop: \n" |
+ "lb $v1, 0(%[src]) \n" |
+ "addiu %[src], %[src], 1 \n" |
+ "addiu %[dst], %[dst], 1 \n" |
+ "bne %[dst], $a3, $last8loop \n" |
+ " sb $v1, -1(%[dst]) \n" |
+ |
+ "leave: \n" |
+ " j $ra \n" |
+ " nop \n" |
+ |
+ // |
+ // UNALIGNED case |
+ // |
+ |
+ "unaligned: \n" |
+ // got here with a3="negu a1" |
+ "andi $a3, $a3, 0x3 \n" // a1 is word aligned? |
+ "beqz $a3, $ua_chk16w \n" |
+ " subu %[count], %[count], $a3 \n" |
+ // bytes left after initial a3 bytes |
+ "lwr $v1, 0(%[src]) \n" |
+ "lwl $v1, 3(%[src]) \n" |
+ "addu %[src], %[src], $a3 \n" // a3 may be 1, 2 or 3 |
+ "swr $v1, 0(%[dst]) \n" |
+ "addu %[dst], %[dst], $a3 \n" |
+ // below the dst will be word aligned (NOTE1) |
+ "$ua_chk16w: \n" |
+ "andi $t8, %[count], 0x3f \n" // whole 64-B chunks? |
+ // t8 is the byte count after 64-byte chunks |
+ "beq %[count], $t8, ua_chk8w \n" |
+ // if a2==t8, no 64-byte chunks |
+ // There will be at most 1 32-byte chunk after it |
+ "subu $a3, %[count], $t8 \n" // the reminder |
+ // Here a3 counts bytes in 16w chunks |
+ "addu $a3, %[dst], $a3 \n" |
+ // Now a3 is the final dst after 64-byte chunks |
+ "addu $t0, %[dst], %[count] \n" // t0 "past the end" |
+ "subu $t9, $t0, 160 \n" |
+ // t9 is the "last safe pref 30,128(a1)" address |
+ "pref 0, 0(%[src]) \n" // first line of src |
+ "pref 0, 32(%[src]) \n" // second line addr 32 |
+ "pref 0, 64(%[src]) \n" |
+ "pref 30, 32(%[dst]) \n" |
+ // safe, as we have at least 64 bytes ahead |
+ // In case the a1 > t9 don't use "pref 30" at all |
+ "sgtu $v1, %[dst], $t9 \n" |
+ "bgtz $v1, $ua_loop16w \n" |
+ // skip "pref 30,64(a1)" for too short arrays |
+ " nop \n" |
+ // otherwise, start with using pref30 |
+ "pref 30, 64(%[dst]) \n" |
+ "$ua_loop16w: \n" |
+ "pref 0, 96(%[src]) \n" |
+ "lwr $t0, 0(%[src]) \n" |
+ "lwl $t0, 3(%[src]) \n" |
+ "lwr $t1, 4(%[src]) \n" |
+ "bgtz $v1, $ua_skip_pref30_96 \n" |
+ " lwl $t1, 7(%[src]) \n" |
+ "pref 30, 96(%[dst]) \n" |
+ // continue setting up the dest, addr 96 |
+ "$ua_skip_pref30_96: \n" |
+ "lwr $t2, 8(%[src]) \n" |
+ "lwl $t2, 11(%[src]) \n" |
+ "lwr $t3, 12(%[src]) \n" |
+ "lwl $t3, 15(%[src]) \n" |
+ "lwr $t4, 16(%[src]) \n" |
+ "lwl $t4, 19(%[src]) \n" |
+ "lwr $t5, 20(%[src]) \n" |
+ "lwl $t5, 23(%[src]) \n" |
+ "lwr $t6, 24(%[src]) \n" |
+ "lwl $t6, 27(%[src]) \n" |
+ "lwr $t7, 28(%[src]) \n" |
+ "lwl $t7, 31(%[src]) \n" |
+ "pref 0, 128(%[src]) \n" |
+ // bring the next lines of src, addr 128 |
+ "sw $t0, 0(%[dst]) \n" |
+ "sw $t1, 4(%[dst]) \n" |
+ "sw $t2, 8(%[dst]) \n" |
+ "sw $t3, 12(%[dst]) \n" |
+ "sw $t4, 16(%[dst]) \n" |
+ "sw $t5, 20(%[dst]) \n" |
+ "sw $t6, 24(%[dst]) \n" |
+ "sw $t7, 28(%[dst]) \n" |
+ "lwr $t0, 32(%[src]) \n" |
+ "lwl $t0, 35(%[src]) \n" |
+ "lwr $t1, 36(%[src]) \n" |
+ "bgtz $v1, ua_skip_pref30_128 \n" |
+ " lwl $t1, 39(%[src]) \n" |
+ "pref 30, 128(%[dst]) \n" |
+ // continue setting up the dest, addr 128 |
+ "ua_skip_pref30_128: \n" |
+ |
+ "lwr $t2, 40(%[src]) \n" |
+ "lwl $t2, 43(%[src]) \n" |
+ "lwr $t3, 44(%[src]) \n" |
+ "lwl $t3, 47(%[src]) \n" |
+ "lwr $t4, 48(%[src]) \n" |
+ "lwl $t4, 51(%[src]) \n" |
+ "lwr $t5, 52(%[src]) \n" |
+ "lwl $t5, 55(%[src]) \n" |
+ "lwr $t6, 56(%[src]) \n" |
+ "lwl $t6, 59(%[src]) \n" |
+ "lwr $t7, 60(%[src]) \n" |
+ "lwl $t7, 63(%[src]) \n" |
+ "pref 0, 160(%[src]) \n" |
+ // bring the next lines of src, addr 160 |
+ "sw $t0, 32(%[dst]) \n" |
+ "sw $t1, 36(%[dst]) \n" |
+ "sw $t2, 40(%[dst]) \n" |
+ "sw $t3, 44(%[dst]) \n" |
+ "sw $t4, 48(%[dst]) \n" |
+ "sw $t5, 52(%[dst]) \n" |
+ "sw $t6, 56(%[dst]) \n" |
+ "sw $t7, 60(%[dst]) \n" |
+ |
+ "addiu %[dst],%[dst],64 \n" // adding 64 to dest |
+ "sgtu $v1,%[dst],$t9 \n" |
+ "bne %[dst],$a3,$ua_loop16w \n" |
+ " addiu %[src],%[src],64 \n" // adding 64 to src |
+ "move %[count],$t8 \n" |
+ |
+ // Here we have src and dest word-aligned but less than 64-bytes to go |
+ |
+ "ua_chk8w: \n" |
+ "pref 0, 0x0(%[src]) \n" |
+ "andi $t8, %[count], 0x1f \n" // 32-byte chunk? |
+ // the t8 is the reminder count |
+ "beq %[count], $t8, $ua_chk1w \n" |
+ // when count==t8, no 32-byte chunk |
+ |
+ "lwr $t0, 0(%[src]) \n" |
+ "lwl $t0, 3(%[src]) \n" |
+ "lwr $t1, 4(%[src]) \n" |
+ "lwl $t1, 7(%[src]) \n" |
+ "lwr $t2, 8(%[src]) \n" |
+ "lwl $t2, 11(%[src]) \n" |
+ "lwr $t3, 12(%[src]) \n" |
+ "lwl $t3, 15(%[src]) \n" |
+ "lwr $t4, 16(%[src]) \n" |
+ "lwl $t4, 19(%[src]) \n" |
+ "lwr $t5, 20(%[src]) \n" |
+ "lwl $t5, 23(%[src]) \n" |
+ "lwr $t6, 24(%[src]) \n" |
+ "lwl $t6, 27(%[src]) \n" |
+ "lwr $t7, 28(%[src]) \n" |
+ "lwl $t7, 31(%[src]) \n" |
+ "addiu %[src], %[src], 32 \n" |
+ |
+ "sw $t0, 0(%[dst]) \n" |
+ "sw $t1, 4(%[dst]) \n" |
+ "sw $t2, 8(%[dst]) \n" |
+ "sw $t3, 12(%[dst]) \n" |
+ "sw $t4, 16(%[dst]) \n" |
+ "sw $t5, 20(%[dst]) \n" |
+ "sw $t6, 24(%[dst]) \n" |
+ "sw $t7, 28(%[dst]) \n" |
+ "addiu %[dst], %[dst], 32 \n" |
+ |
+ "$ua_chk1w: \n" |
+ "andi %[count], $t8, 0x3 \n" |
+ // now count is the reminder past 1w chunks |
+ "beq %[count], $t8, ua_smallCopy \n" |
+ "subu $a3, $t8, %[count] \n" |
+ // a3 is count of bytes in 1w chunks |
+ "addu $a3, %[dst], $a3 \n" |
+ // now a3 is the dst address past the 1w chunks |
+ |
+ // copying in words (4-byte chunks) |
+ "$ua_wordCopy_loop: \n" |
+ "lwr $v1, 0(%[src]) \n" |
+ "lwl $v1, 3(%[src]) \n" |
+ "addiu %[src], %[src], 4 \n" |
+ "addiu %[dst], %[dst], 4 \n" |
+ // note: dst=a1 is word aligned here, see NOTE1 |
+ "bne %[dst], $a3, $ua_wordCopy_loop \n" |
+ " sw $v1,-4(%[dst]) \n" |
+ |
+ // Now less than 4 bytes (value in count) left to copy |
+ "ua_smallCopy: \n" |
+ "beqz %[count], leave \n" |
+ " addu $a3, %[dst], %[count] \n" // a3 = last dst address |
+ "$ua_smallCopy_loop: \n" |
+ "lb $v1, 0(%[src]) \n" |
+ "addiu %[src], %[src], 1 \n" |
+ "addiu %[dst], %[dst], 1 \n" |
+ "bne %[dst],$a3,$ua_smallCopy_loop \n" |
+ " sb $v1, -1(%[dst]) \n" |
+ |
+ "j $ra \n" |
+ " nop \n" |
+ ".set at \n" |
+ ".set reorder \n" |
+ : [dst] "+r" (dst), [src] "+r" (src) |
+ : [count] "r" (count) |
+ : "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", |
+ "t8", "t9", "a3", "v1", "at" |
+ ); |
+} |
+#endif // HAS_COPYROW_MIPS |
+ |
+// MIPS DSPR2 functions |
+#if !defined(LIBYUV_DISABLE_MIPS) && defined(__mips_dsp) && \ |
+ (__mips_dsp_rev >= 2) |
+void SplitUVRow_MIPS_DSPR2(const uint8* src_uv, uint8* dst_u, uint8* dst_v, |
+ int width) { |
+ __asm__ __volatile__ ( |
+ ".set push \n" |
+ ".set noreorder \n" |
+ "srl $t4, %[width], 4 \n" // multiplies of 16 |
+ "blez $t4, 2f \n" |
+ " andi %[width], %[width], 0xf \n" // residual |
+ |
+ ".p2align 2 \n" |
+ "1: \n" |
+ "addiu $t4, $t4, -1 \n" |
+ "lw $t0, 0(%[src_uv]) \n" // V1 | U1 | V0 | U0 |
+ "lw $t1, 4(%[src_uv]) \n" // V3 | U3 | V2 | U2 |
+ "lw $t2, 8(%[src_uv]) \n" // V5 | U5 | V4 | U4 |
+ "lw $t3, 12(%[src_uv]) \n" // V7 | U7 | V6 | U6 |
+ "lw $t5, 16(%[src_uv]) \n" // V9 | U9 | V8 | U8 |
+ "lw $t6, 20(%[src_uv]) \n" // V11 | U11 | V10 | U10 |
+ "lw $t7, 24(%[src_uv]) \n" // V13 | U13 | V12 | U12 |
+ "lw $t8, 28(%[src_uv]) \n" // V15 | U15 | V14 | U14 |
+ "addiu %[src_uv], %[src_uv], 32 \n" |
+ "precrq.qb.ph $t9, $t1, $t0 \n" // V3 | V2 | V1 | V0 |
+ "precr.qb.ph $t0, $t1, $t0 \n" // U3 | U2 | U1 | U0 |
+ "precrq.qb.ph $t1, $t3, $t2 \n" // V7 | V6 | V5 | V4 |
+ "precr.qb.ph $t2, $t3, $t2 \n" // U7 | U6 | U5 | U4 |
+ "precrq.qb.ph $t3, $t6, $t5 \n" // V11 | V10 | V9 | V8 |
+ "precr.qb.ph $t5, $t6, $t5 \n" // U11 | U10 | U9 | U8 |
+ "precrq.qb.ph $t6, $t8, $t7 \n" // V15 | V14 | V13 | V12 |
+ "precr.qb.ph $t7, $t8, $t7 \n" // U15 | U14 | U13 | U12 |
+ "sw $t9, 0(%[dst_v]) \n" |
+ "sw $t0, 0(%[dst_u]) \n" |
+ "sw $t1, 4(%[dst_v]) \n" |
+ "sw $t2, 4(%[dst_u]) \n" |
+ "sw $t3, 8(%[dst_v]) \n" |
+ "sw $t5, 8(%[dst_u]) \n" |
+ "sw $t6, 12(%[dst_v]) \n" |
+ "sw $t7, 12(%[dst_u]) \n" |
+ "addiu %[dst_v], %[dst_v], 16 \n" |
+ "bgtz $t4, 1b \n" |
+ " addiu %[dst_u], %[dst_u], 16 \n" |
+ |
+ "beqz %[width], 3f \n" |
+ " nop \n" |
+ |
+ "2: \n" |
+ "lbu $t0, 0(%[src_uv]) \n" |
+ "lbu $t1, 1(%[src_uv]) \n" |
+ "addiu %[src_uv], %[src_uv], 2 \n" |
+ "addiu %[width], %[width], -1 \n" |
+ "sb $t0, 0(%[dst_u]) \n" |
+ "sb $t1, 0(%[dst_v]) \n" |
+ "addiu %[dst_u], %[dst_u], 1 \n" |
+ "bgtz %[width], 2b \n" |
+ " addiu %[dst_v], %[dst_v], 1 \n" |
+ |
+ "3: \n" |
+ ".set pop \n" |
+ : [src_uv] "+r" (src_uv), |
+ [width] "+r" (width), |
+ [dst_u] "+r" (dst_u), |
+ [dst_v] "+r" (dst_v) |
+ : |
+ : "t0", "t1", "t2", "t3", |
+ "t4", "t5", "t6", "t7", "t8", "t9" |
+ ); |
+} |
+ |
+void SplitUVRow_Unaligned_MIPS_DSPR2(const uint8* src_uv, uint8* dst_u, |
+ uint8* dst_v, int width) { |
+ __asm__ __volatile__ ( |
+ ".set push \n" |
+ ".set noreorder \n" |
+ "srl $t4, %[width], 4 \n" // multiplies of 16 |
+ "blez $t4, 2f \n" |
+ " andi %[width], %[width], 0xf \n" // residual |
+ |
+ ".p2align 2 \n" |
+ "1: \n" |
+ "addiu $t4, $t4, -1 \n" |
+ "lwr $t0, 0(%[src_uv]) \n" |
+ "lwl $t0, 3(%[src_uv]) \n" // V1 | U1 | V0 | U0 |
+ "lwr $t1, 4(%[src_uv]) \n" |
+ "lwl $t1, 7(%[src_uv]) \n" // V3 | U3 | V2 | U2 |
+ "lwr $t2, 8(%[src_uv]) \n" |
+ "lwl $t2, 11(%[src_uv]) \n" // V5 | U5 | V4 | U4 |
+ "lwr $t3, 12(%[src_uv]) \n" |
+ "lwl $t3, 15(%[src_uv]) \n" // V7 | U7 | V6 | U6 |
+ "lwr $t5, 16(%[src_uv]) \n" |
+ "lwl $t5, 19(%[src_uv]) \n" // V9 | U9 | V8 | U8 |
+ "lwr $t6, 20(%[src_uv]) \n" |
+ "lwl $t6, 23(%[src_uv]) \n" // V11 | U11 | V10 | U10 |
+ "lwr $t7, 24(%[src_uv]) \n" |
+ "lwl $t7, 27(%[src_uv]) \n" // V13 | U13 | V12 | U12 |
+ "lwr $t8, 28(%[src_uv]) \n" |
+ "lwl $t8, 31(%[src_uv]) \n" // V15 | U15 | V14 | U14 |
+ "precrq.qb.ph $t9, $t1, $t0 \n" // V3 | V2 | V1 | V0 |
+ "precr.qb.ph $t0, $t1, $t0 \n" // U3 | U2 | U1 | U0 |
+ "precrq.qb.ph $t1, $t3, $t2 \n" // V7 | V6 | V5 | V4 |
+ "precr.qb.ph $t2, $t3, $t2 \n" // U7 | U6 | U5 | U4 |
+ "precrq.qb.ph $t3, $t6, $t5 \n" // V11 | V10 | V9 | V8 |
+ "precr.qb.ph $t5, $t6, $t5 \n" // U11 | U10 | U9 | U8 |
+ "precrq.qb.ph $t6, $t8, $t7 \n" // V15 | V14 | V13 | V12 |
+ "precr.qb.ph $t7, $t8, $t7 \n" // U15 | U14 | U13 | U12 |
+ "addiu %[src_uv], %[src_uv], 32 \n" |
+ "swr $t9, 0(%[dst_v]) \n" |
+ "swl $t9, 3(%[dst_v]) \n" |
+ "swr $t0, 0(%[dst_u]) \n" |
+ "swl $t0, 3(%[dst_u]) \n" |
+ "swr $t1, 4(%[dst_v]) \n" |
+ "swl $t1, 7(%[dst_v]) \n" |
+ "swr $t2, 4(%[dst_u]) \n" |
+ "swl $t2, 7(%[dst_u]) \n" |
+ "swr $t3, 8(%[dst_v]) \n" |
+ "swl $t3, 11(%[dst_v]) \n" |
+ "swr $t5, 8(%[dst_u]) \n" |
+ "swl $t5, 11(%[dst_u]) \n" |
+ "swr $t6, 12(%[dst_v]) \n" |
+ "swl $t6, 15(%[dst_v]) \n" |
+ "swr $t7, 12(%[dst_u]) \n" |
+ "swl $t7, 15(%[dst_u]) \n" |
+ "addiu %[dst_u], %[dst_u], 16 \n" |
+ "bgtz $t4, 1b \n" |
+ " addiu %[dst_v], %[dst_v], 16 \n" |
+ |
+ "beqz %[width], 3f \n" |
+ " nop \n" |
+ |
+ "2: \n" |
+ "lbu $t0, 0(%[src_uv]) \n" |
+ "lbu $t1, 1(%[src_uv]) \n" |
+ "addiu %[src_uv], %[src_uv], 2 \n" |
+ "addiu %[width], %[width], -1 \n" |
+ "sb $t0, 0(%[dst_u]) \n" |
+ "sb $t1, 0(%[dst_v]) \n" |
+ "addiu %[dst_u], %[dst_u], 1 \n" |
+ "bgtz %[width], 2b \n" |
+ " addiu %[dst_v], %[dst_v], 1 \n" |
+ |
+ "3: \n" |
+ ".set pop \n" |
+ : [src_uv] "+r" (src_uv), |
+ [width] "+r" (width), |
+ [dst_u] "+r" (dst_u), |
+ [dst_v] "+r" (dst_v) |
+ : |
+ : "t0", "t1", "t2", "t3", |
+ "t4", "t5", "t6", "t7", "t8", "t9" |
+ ); |
+} |
+ |
+void MirrorRow_MIPS_DSPR2(const uint8* src, uint8* dst, int width) { |
+ __asm__ __volatile__ ( |
+ ".set push \n" |
+ ".set noreorder \n" |
+ |
+ "srl $t4, %[width], 4 \n" // multiplies of 16 |
+ "andi $t5, %[width], 0xf \n" |
+ "blez $t4, 2f \n" |
+ " addu %[src], %[src], %[width] \n" // src += width |
+ |
+ ".p2align 2 \n" |
+ "1: \n" |
+ "lw $t0, -16(%[src]) \n" // |3|2|1|0| |
+ "lw $t1, -12(%[src]) \n" // |7|6|5|4| |
+ "lw $t2, -8(%[src]) \n" // |11|10|9|8| |
+ "lw $t3, -4(%[src]) \n" // |15|14|13|12| |
+ "wsbh $t0, $t0 \n" // |2|3|0|1| |
+ "wsbh $t1, $t1 \n" // |6|7|4|5| |
+ "wsbh $t2, $t2 \n" // |10|11|8|9| |
+ "wsbh $t3, $t3 \n" // |14|15|12|13| |
+ "rotr $t0, $t0, 16 \n" // |0|1|2|3| |
+ "rotr $t1, $t1, 16 \n" // |4|5|6|7| |
+ "rotr $t2, $t2, 16 \n" // |8|9|10|11| |
+ "rotr $t3, $t3, 16 \n" // |12|13|14|15| |
+ "addiu %[src], %[src], -16 \n" |
+ "addiu $t4, $t4, -1 \n" |
+ "sw $t3, 0(%[dst]) \n" // |15|14|13|12| |
+ "sw $t2, 4(%[dst]) \n" // |11|10|9|8| |
+ "sw $t1, 8(%[dst]) \n" // |7|6|5|4| |
+ "sw $t0, 12(%[dst]) \n" // |3|2|1|0| |
+ "bgtz $t4, 1b \n" |
+ " addiu %[dst], %[dst], 16 \n" |
+ "beqz $t5, 3f \n" |
+ " nop \n" |
+ |
+ "2: \n" |
+ "lbu $t0, -1(%[src]) \n" |
+ "addiu $t5, $t5, -1 \n" |
+ "addiu %[src], %[src], -1 \n" |
+ "sb $t0, 0(%[dst]) \n" |
+ "bgez $t5, 2b \n" |
+ " addiu %[dst], %[dst], 1 \n" |
+ |
+ "3: \n" |
+ ".set pop \n" |
+ : [src] "+r" (src), [dst] "+r" (dst) |
+ : [width] "r" (width) |
+ : "t0", "t1", "t2", "t3", "t4", "t5" |
+ ); |
+} |
+ |
+void MirrorUVRow_MIPS_DSPR2(const uint8* src_uv, uint8* dst_u, uint8* dst_v, |
+ int width) { |
+ int x = 0; |
+ int y = 0; |
+ __asm__ __volatile__ ( |
+ ".set push \n" |
+ ".set noreorder \n" |
+ |
+ "addu $t4, %[width], %[width] \n" |
+ "srl %[x], %[width], 4 \n" |
+ "andi %[y], %[width], 0xf \n" |
+ "blez %[x], 2f \n" |
+ " addu %[src_uv], %[src_uv], $t4 \n" |
+ |
+ ".p2align 2 \n" |
+ "1: \n" |
+ "lw $t0, -32(%[src_uv]) \n" // |3|2|1|0| |
+ "lw $t1, -28(%[src_uv]) \n" // |7|6|5|4| |
+ "lw $t2, -24(%[src_uv]) \n" // |11|10|9|8| |
+ "lw $t3, -20(%[src_uv]) \n" // |15|14|13|12| |
+ "lw $t4, -16(%[src_uv]) \n" // |19|18|17|16| |
+ "lw $t6, -12(%[src_uv]) \n" // |23|22|21|20| |
+ "lw $t7, -8(%[src_uv]) \n" // |27|26|25|24| |
+ "lw $t8, -4(%[src_uv]) \n" // |31|30|29|28| |
+ |
+ "rotr $t0, $t0, 16 \n" // |1|0|3|2| |
+ "rotr $t1, $t1, 16 \n" // |5|4|7|6| |
+ "rotr $t2, $t2, 16 \n" // |9|8|11|10| |
+ "rotr $t3, $t3, 16 \n" // |13|12|15|14| |
+ "rotr $t4, $t4, 16 \n" // |17|16|19|18| |
+ "rotr $t6, $t6, 16 \n" // |21|20|23|22| |
+ "rotr $t7, $t7, 16 \n" // |25|24|27|26| |
+ "rotr $t8, $t8, 16 \n" // |29|28|31|30| |
+ "precr.qb.ph $t9, $t0, $t1 \n" // |0|2|4|6| |
+ "precrq.qb.ph $t5, $t0, $t1 \n" // |1|3|5|7| |
+ "precr.qb.ph $t0, $t2, $t3 \n" // |8|10|12|14| |
+ "precrq.qb.ph $t1, $t2, $t3 \n" // |9|11|13|15| |
+ "precr.qb.ph $t2, $t4, $t6 \n" // |16|18|20|22| |
+ "precrq.qb.ph $t3, $t4, $t6 \n" // |17|19|21|23| |
+ "precr.qb.ph $t4, $t7, $t8 \n" // |24|26|28|30| |
+ "precrq.qb.ph $t6, $t7, $t8 \n" // |25|27|29|31| |
+ "addiu %[src_uv], %[src_uv], -32 \n" |
+ "addiu %[x], %[x], -1 \n" |
+ "swr $t4, 0(%[dst_u]) \n" |
+ "swl $t4, 3(%[dst_u]) \n" // |30|28|26|24| |
+ "swr $t6, 0(%[dst_v]) \n" |
+ "swl $t6, 3(%[dst_v]) \n" // |31|29|27|25| |
+ "swr $t2, 4(%[dst_u]) \n" |
+ "swl $t2, 7(%[dst_u]) \n" // |22|20|18|16| |
+ "swr $t3, 4(%[dst_v]) \n" |
+ "swl $t3, 7(%[dst_v]) \n" // |23|21|19|17| |
+ "swr $t0, 8(%[dst_u]) \n" |
+ "swl $t0, 11(%[dst_u]) \n" // |14|12|10|8| |
+ "swr $t1, 8(%[dst_v]) \n" |
+ "swl $t1, 11(%[dst_v]) \n" // |15|13|11|9| |
+ "swr $t9, 12(%[dst_u]) \n" |
+ "swl $t9, 15(%[dst_u]) \n" // |6|4|2|0| |
+ "swr $t5, 12(%[dst_v]) \n" |
+ "swl $t5, 15(%[dst_v]) \n" // |7|5|3|1| |
+ "addiu %[dst_v], %[dst_v], 16 \n" |
+ "bgtz %[x], 1b \n" |
+ " addiu %[dst_u], %[dst_u], 16 \n" |
+ "beqz %[y], 3f \n" |
+ " nop \n" |
+ "b 2f \n" |
+ " nop \n" |
+ |
+ "2: \n" |
+ "lbu $t0, -2(%[src_uv]) \n" |
+ "lbu $t1, -1(%[src_uv]) \n" |
+ "addiu %[src_uv], %[src_uv], -2 \n" |
+ "addiu %[y], %[y], -1 \n" |
+ "sb $t0, 0(%[dst_u]) \n" |
+ "sb $t1, 0(%[dst_v]) \n" |
+ "addiu %[dst_u], %[dst_u], 1 \n" |
+ "bgtz %[y], 2b \n" |
+ " addiu %[dst_v], %[dst_v], 1 \n" |
+ |
+ "3: \n" |
+ ".set pop \n" |
+ : [src_uv] "+r" (src_uv), |
+ [dst_u] "+r" (dst_u), |
+ [dst_v] "+r" (dst_v), |
+ [x] "=&r" (x), |
+ [y] "+r" (y) |
+ : [width] "r" (width) |
+ : "t0", "t1", "t2", "t3", "t4", |
+ "t5", "t7", "t8", "t9" |
+ ); |
+} |
+ |
+// Convert (4 Y and 2 VU) I422 and arrange RGB values into |
+// t5 = | 0 | B0 | 0 | b0 | |
+// t4 = | 0 | B1 | 0 | b1 | |
+// t9 = | 0 | G0 | 0 | g0 | |
+// t8 = | 0 | G1 | 0 | g1 | |
+// t2 = | 0 | R0 | 0 | r0 | |
+// t1 = | 0 | R1 | 0 | r1 | |
+#define I422ToTransientMipsRGB \ |
+ "lw $t0, 0(%[y_buf]) \n" \ |
+ "lhu $t1, 0(%[u_buf]) \n" \ |
+ "lhu $t2, 0(%[v_buf]) \n" \ |
+ "preceu.ph.qbr $t1, $t1 \n" \ |
+ "preceu.ph.qbr $t2, $t2 \n" \ |
+ "preceu.ph.qbra $t3, $t0 \n" \ |
+ "preceu.ph.qbla $t0, $t0 \n" \ |
+ "subu.ph $t1, $t1, $s5 \n" \ |
+ "subu.ph $t2, $t2, $s5 \n" \ |
+ "subu.ph $t3, $t3, $s4 \n" \ |
+ "subu.ph $t0, $t0, $s4 \n" \ |
+ "mul.ph $t3, $t3, $s0 \n" \ |
+ "mul.ph $t0, $t0, $s0 \n" \ |
+ "shll.ph $t4, $t1, 0x7 \n" \ |
+ "subu.ph $t4, $t4, $t1 \n" \ |
+ "mul.ph $t6, $t1, $s1 \n" \ |
+ "mul.ph $t1, $t2, $s2 \n" \ |
+ "addq_s.ph $t5, $t4, $t3 \n" \ |
+ "addq_s.ph $t4, $t4, $t0 \n" \ |
+ "shra.ph $t5, $t5, 6 \n" \ |
+ "shra.ph $t4, $t4, 6 \n" \ |
+ "addiu %[u_buf], 2 \n" \ |
+ "addiu %[v_buf], 2 \n" \ |
+ "addu.ph $t6, $t6, $t1 \n" \ |
+ "mul.ph $t1, $t2, $s3 \n" \ |
+ "addu.ph $t9, $t6, $t3 \n" \ |
+ "addu.ph $t8, $t6, $t0 \n" \ |
+ "shra.ph $t9, $t9, 6 \n" \ |
+ "shra.ph $t8, $t8, 6 \n" \ |
+ "addu.ph $t2, $t1, $t3 \n" \ |
+ "addu.ph $t1, $t1, $t0 \n" \ |
+ "shra.ph $t2, $t2, 6 \n" \ |
+ "shra.ph $t1, $t1, 6 \n" \ |
+ "subu.ph $t5, $t5, $s5 \n" \ |
+ "subu.ph $t4, $t4, $s5 \n" \ |
+ "subu.ph $t9, $t9, $s5 \n" \ |
+ "subu.ph $t8, $t8, $s5 \n" \ |
+ "subu.ph $t2, $t2, $s5 \n" \ |
+ "subu.ph $t1, $t1, $s5 \n" \ |
+ "shll_s.ph $t5, $t5, 8 \n" \ |
+ "shll_s.ph $t4, $t4, 8 \n" \ |
+ "shll_s.ph $t9, $t9, 8 \n" \ |
+ "shll_s.ph $t8, $t8, 8 \n" \ |
+ "shll_s.ph $t2, $t2, 8 \n" \ |
+ "shll_s.ph $t1, $t1, 8 \n" \ |
+ "shra.ph $t5, $t5, 8 \n" \ |
+ "shra.ph $t4, $t4, 8 \n" \ |
+ "shra.ph $t9, $t9, 8 \n" \ |
+ "shra.ph $t8, $t8, 8 \n" \ |
+ "shra.ph $t2, $t2, 8 \n" \ |
+ "shra.ph $t1, $t1, 8 \n" \ |
+ "addu.ph $t5, $t5, $s5 \n" \ |
+ "addu.ph $t4, $t4, $s5 \n" \ |
+ "addu.ph $t9, $t9, $s5 \n" \ |
+ "addu.ph $t8, $t8, $s5 \n" \ |
+ "addu.ph $t2, $t2, $s5 \n" \ |
+ "addu.ph $t1, $t1, $s5 \n" |
+ |
+void I422ToARGBRow_MIPS_DSPR2(const uint8* y_buf, |
+ const uint8* u_buf, |
+ const uint8* v_buf, |
+ uint8* rgb_buf, |
+ int width) { |
+ __asm__ __volatile__ ( |
+ ".set push \n" |
+ ".set noreorder \n" |
+ "beqz %[width], 2f \n" |
+ " repl.ph $s0, 74 \n" // |YG|YG| = |74|74| |
+ "repl.ph $s1, -25 \n" // |UG|UG| = |-25|-25| |
+ "repl.ph $s2, -52 \n" // |VG|VG| = |-52|-52| |
+ "repl.ph $s3, 102 \n" // |VR|VR| = |102|102| |
+ "repl.ph $s4, 16 \n" // |0|16|0|16| |
+ "repl.ph $s5, 128 \n" // |128|128| // clipping |
+ "lui $s6, 0xff00 \n" |
+ "ori $s6, 0xff00 \n" // |ff|00|ff|00|ff| |
+ |
+ ".p2align 2 \n" |
+ "1: \n" |
+ I422ToTransientMipsRGB |
+// Arranging into argb format |
+ "precr.qb.ph $t4, $t8, $t4 \n" // |G1|g1|B1|b1| |
+ "precr.qb.ph $t5, $t9, $t5 \n" // |G0|g0|B0|b0| |
+ "addiu %[width], -4 \n" |
+ "precrq.qb.ph $t8, $t4, $t5 \n" // |G1|B1|G0|B0| |
+ "precr.qb.ph $t9, $t4, $t5 \n" // |g1|b1|g0|b0| |
+ "precr.qb.ph $t2, $t1, $t2 \n" // |R1|r1|R0|r0| |
+ |
+ "addiu %[y_buf], 4 \n" |
+ "preceu.ph.qbla $t1, $t2 \n" // |0 |R1|0 |R0| |
+ "preceu.ph.qbra $t2, $t2 \n" // |0 |r1|0 |r0| |
+ "or $t1, $t1, $s6 \n" // |ff|R1|ff|R0| |
+ "or $t2, $t2, $s6 \n" // |ff|r1|ff|r0| |
+ "precrq.ph.w $t0, $t2, $t9 \n" // |ff|r1|g1|b1| |
+ "precrq.ph.w $t3, $t1, $t8 \n" // |ff|R1|G1|B1| |
+ "sll $t9, $t9, 16 \n" |
+ "sll $t8, $t8, 16 \n" |
+ "packrl.ph $t2, $t2, $t9 \n" // |ff|r0|g0|b0| |
+ "packrl.ph $t1, $t1, $t8 \n" // |ff|R0|G0|B0| |
+// Store results. |
+ "sw $t2, 0(%[rgb_buf]) \n" |
+ "sw $t0, 4(%[rgb_buf]) \n" |
+ "sw $t1, 8(%[rgb_buf]) \n" |
+ "sw $t3, 12(%[rgb_buf]) \n" |
+ "bnez %[width], 1b \n" |
+ " addiu %[rgb_buf], 16 \n" |
+ "2: \n" |
+ ".set pop \n" |
+ :[y_buf] "+r" (y_buf), |
+ [u_buf] "+r" (u_buf), |
+ [v_buf] "+r" (v_buf), |
+ [width] "+r" (width), |
+ [rgb_buf] "+r" (rgb_buf) |
+ : |
+ : "t0", "t1", "t2", "t3", "t4", "t5", |
+ "t6", "t7", "t8", "t9", |
+ "s0", "s1", "s2", "s3", |
+ "s4", "s5", "s6" |
+ ); |
+} |
+ |
+void I422ToABGRRow_MIPS_DSPR2(const uint8* y_buf, |
+ const uint8* u_buf, |
+ const uint8* v_buf, |
+ uint8* rgb_buf, |
+ int width) { |
+ __asm__ __volatile__ ( |
+ ".set push \n" |
+ ".set noreorder \n" |
+ "beqz %[width], 2f \n" |
+ " repl.ph $s0, 74 \n" // |YG|YG| = |74|74| |
+ "repl.ph $s1, -25 \n" // |UG|UG| = |-25|-25| |
+ "repl.ph $s2, -52 \n" // |VG|VG| = |-52|-52| |
+ "repl.ph $s3, 102 \n" // |VR|VR| = |102|102| |
+ "repl.ph $s4, 16 \n" // |0|16|0|16| |
+ "repl.ph $s5, 128 \n" // |128|128| |
+ "lui $s6, 0xff00 \n" |
+ "ori $s6, 0xff00 \n" // |ff|00|ff|00| |
+ |
+ ".p2align 2 \n" |
+ "1: \n" |
+ I422ToTransientMipsRGB |
+// Arranging into abgr format |
+ "precr.qb.ph $t0, $t8, $t1 \n" // |G1|g1|R1|r1| |
+ "precr.qb.ph $t3, $t9, $t2 \n" // |G0|g0|R0|r0| |
+ "precrq.qb.ph $t8, $t0, $t3 \n" // |G1|R1|G0|R0| |
+ "precr.qb.ph $t9, $t0, $t3 \n" // |g1|r1|g0|r0| |
+ |
+ "precr.qb.ph $t2, $t4, $t5 \n" // |B1|b1|B0|b0| |
+ "addiu %[width], -4 \n" |
+ "addiu %[y_buf], 4 \n" |
+ "preceu.ph.qbla $t1, $t2 \n" // |0 |B1|0 |B0| |
+ "preceu.ph.qbra $t2, $t2 \n" // |0 |b1|0 |b0| |
+ "or $t1, $t1, $s6 \n" // |ff|B1|ff|B0| |
+ "or $t2, $t2, $s6 \n" // |ff|b1|ff|b0| |
+ "precrq.ph.w $t0, $t2, $t9 \n" // |ff|b1|g1|r1| |
+ "precrq.ph.w $t3, $t1, $t8 \n" // |ff|B1|G1|R1| |
+ "sll $t9, $t9, 16 \n" |
+ "sll $t8, $t8, 16 \n" |
+ "packrl.ph $t2, $t2, $t9 \n" // |ff|b0|g0|r0| |
+ "packrl.ph $t1, $t1, $t8 \n" // |ff|B0|G0|R0| |
+// Store results. |
+ "sw $t2, 0(%[rgb_buf]) \n" |
+ "sw $t0, 4(%[rgb_buf]) \n" |
+ "sw $t1, 8(%[rgb_buf]) \n" |
+ "sw $t3, 12(%[rgb_buf]) \n" |
+ "bnez %[width], 1b \n" |
+ " addiu %[rgb_buf], 16 \n" |
+ "2: \n" |
+ ".set pop \n" |
+ :[y_buf] "+r" (y_buf), |
+ [u_buf] "+r" (u_buf), |
+ [v_buf] "+r" (v_buf), |
+ [width] "+r" (width), |
+ [rgb_buf] "+r" (rgb_buf) |
+ : |
+ : "t0", "t1", "t2", "t3", "t4", "t5", |
+ "t6", "t7", "t8", "t9", |
+ "s0", "s1", "s2", "s3", |
+ "s4", "s5", "s6" |
+ ); |
+} |
+ |
+void I422ToBGRARow_MIPS_DSPR2(const uint8* y_buf, |
+ const uint8* u_buf, |
+ const uint8* v_buf, |
+ uint8* rgb_buf, |
+ int width) { |
+ __asm__ __volatile__ ( |
+ ".set push \n" |
+ ".set noreorder \n" |
+ "beqz %[width], 2f \n" |
+ " repl.ph $s0, 74 \n" // |YG|YG| = |74 |74 | |
+ "repl.ph $s1, -25 \n" // |UG|UG| = |-25|-25| |
+ "repl.ph $s2, -52 \n" // |VG|VG| = |-52|-52| |
+ "repl.ph $s3, 102 \n" // |VR|VR| = |102|102| |
+ "repl.ph $s4, 16 \n" // |0|16|0|16| |
+ "repl.ph $s5, 128 \n" // |128|128| |
+ "lui $s6, 0xff \n" |
+ "ori $s6, 0xff \n" // |00|ff|00|ff| |
+ |
+ ".p2align 2 \n" |
+ "1: \n" |
+ I422ToTransientMipsRGB |
+ // Arranging into bgra format |
+ "precr.qb.ph $t4, $t4, $t8 \n" // |B1|b1|G1|g1| |
+ "precr.qb.ph $t5, $t5, $t9 \n" // |B0|b0|G0|g0| |
+ "precrq.qb.ph $t8, $t4, $t5 \n" // |B1|G1|B0|G0| |
+ "precr.qb.ph $t9, $t4, $t5 \n" // |b1|g1|b0|g0| |
+ |
+ "precr.qb.ph $t2, $t1, $t2 \n" // |R1|r1|R0|r0| |
+ "addiu %[width], -4 \n" |
+ "addiu %[y_buf], 4 \n" |
+ "preceu.ph.qbla $t1, $t2 \n" // |0 |R1|0 |R0| |
+ "preceu.ph.qbra $t2, $t2 \n" // |0 |r1|0 |r0| |
+ "sll $t1, $t1, 8 \n" // |R1|0 |R0|0 | |
+ "sll $t2, $t2, 8 \n" // |r1|0 |r0|0 | |
+ "or $t1, $t1, $s6 \n" // |R1|ff|R0|ff| |
+ "or $t2, $t2, $s6 \n" // |r1|ff|r0|ff| |
+ "precrq.ph.w $t0, $t9, $t2 \n" // |b1|g1|r1|ff| |
+ "precrq.ph.w $t3, $t8, $t1 \n" // |B1|G1|R1|ff| |
+ "sll $t1, $t1, 16 \n" |
+ "sll $t2, $t2, 16 \n" |
+ "packrl.ph $t2, $t9, $t2 \n" // |b0|g0|r0|ff| |
+ "packrl.ph $t1, $t8, $t1 \n" // |B0|G0|R0|ff| |
+// Store results. |
+ "sw $t2, 0(%[rgb_buf]) \n" |
+ "sw $t0, 4(%[rgb_buf]) \n" |
+ "sw $t1, 8(%[rgb_buf]) \n" |
+ "sw $t3, 12(%[rgb_buf]) \n" |
+ "bnez %[width], 1b \n" |
+ " addiu %[rgb_buf], 16 \n" |
+ "2: \n" |
+ ".set pop \n" |
+ :[y_buf] "+r" (y_buf), |
+ [u_buf] "+r" (u_buf), |
+ [v_buf] "+r" (v_buf), |
+ [width] "+r" (width), |
+ [rgb_buf] "+r" (rgb_buf) |
+ : |
+ : "t0", "t1", "t2", "t3", "t4", "t5", |
+ "t6", "t7", "t8", "t9", |
+ "s0", "s1", "s2", "s3", |
+ "s4", "s5", "s6" |
+ ); |
+} |
+ |
+// Bilinear filter 8x2 -> 8x1 |
+void InterpolateRows_MIPS_DSPR2(uint8* dst_ptr, const uint8* src_ptr, |
+ ptrdiff_t src_stride, int dst_width, |
+ int source_y_fraction) { |
+ int y0_fraction = 256 - source_y_fraction; |
+ const uint8* src_ptr1 = src_ptr + src_stride; |
+ |
+ __asm__ __volatile__ ( |
+ ".set push \n" |
+ ".set noreorder \n" |
+ |
+ "replv.ph $t0, %[y0_fraction] \n" |
+ "replv.ph $t1, %[source_y_fraction] \n" |
+ |
+ ".p2align 2 \n" |
+ "1: \n" |
+ "lw $t2, 0(%[src_ptr]) \n" |
+ "lw $t3, 0(%[src_ptr1]) \n" |
+ "lw $t4, 4(%[src_ptr]) \n" |
+ "lw $t5, 4(%[src_ptr1]) \n" |
+ "muleu_s.ph.qbl $t6, $t2, $t0 \n" |
+ "muleu_s.ph.qbr $t7, $t2, $t0 \n" |
+ "muleu_s.ph.qbl $t8, $t3, $t1 \n" |
+ "muleu_s.ph.qbr $t9, $t3, $t1 \n" |
+ "muleu_s.ph.qbl $t2, $t4, $t0 \n" |
+ "muleu_s.ph.qbr $t3, $t4, $t0 \n" |
+ "muleu_s.ph.qbl $t4, $t5, $t1 \n" |
+ "muleu_s.ph.qbr $t5, $t5, $t1 \n" |
+ "addq.ph $t6, $t6, $t8 \n" |
+ "addq.ph $t7, $t7, $t9 \n" |
+ "addq.ph $t2, $t2, $t4 \n" |
+ "addq.ph $t3, $t3, $t5 \n" |
+ "shra.ph $t6, $t6, 8 \n" |
+ "shra.ph $t7, $t7, 8 \n" |
+ "shra.ph $t2, $t2, 8 \n" |
+ "shra.ph $t3, $t3, 8 \n" |
+ "precr.qb.ph $t6, $t6, $t7 \n" |
+ "precr.qb.ph $t2, $t2, $t3 \n" |
+ "addiu %[src_ptr], %[src_ptr], 8 \n" |
+ "addiu %[src_ptr1], %[src_ptr1], 8 \n" |
+ "addiu %[dst_width], %[dst_width], -8 \n" |
+ "sw $t6, 0(%[dst_ptr]) \n" |
+ "sw $t2, 4(%[dst_ptr]) \n" |
+ "bgtz %[dst_width], 1b \n" |
+ " addiu %[dst_ptr], %[dst_ptr], 8 \n" |
+ |
+ ".set pop \n" |
+ : [dst_ptr] "+r" (dst_ptr), |
+ [src_ptr1] "+r" (src_ptr1), |
+ [src_ptr] "+r" (src_ptr), |
+ [dst_width] "+r" (dst_width) |
+ : [source_y_fraction] "r" (source_y_fraction), |
+ [y0_fraction] "r" (y0_fraction), |
+ [src_stride] "r" (src_stride) |
+ : "t0", "t1", "t2", "t3", "t4", "t5", |
+ "t6", "t7", "t8", "t9" |
+ ); |
+} |
+#endif // __mips_dsp_rev >= 2 |
+ |
+#endif // defined(__mips__) |
+ |
+#ifdef __cplusplus |
+} // extern "C" |
+} // namespace libyuv |
+#endif |