Pepper VideoDecoder API definition.

ppapi/c/ppb_video_decoder.h

Index: ppapi/c/ppb_video_decoder.h
diff --git a/ppapi/c/ppb_video_decoder.h b/ppapi/c/ppb_video_decoder.h
new file mode 100644
index 0000000000000000000000000000000000000000..f09908c222ff31ddef42233c324517f260a66092
--- /dev/null
+++ b/ppapi/c/ppb_video_decoder.h
@@ -0,0 +1,209 @@
+/* Copyright (c) 2014 The Chromium Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+/* From ppb_video_decoder.idl modified Tue May  6 05:19:45 2014. */
+
+#ifndef PPAPI_C_PPB_VIDEO_DECODER_H_
+#define PPAPI_C_PPB_VIDEO_DECODER_H_
+
+#include "ppapi/c/pp_bool.h"
+#include "ppapi/c/pp_codecs.h"
+#include "ppapi/c/pp_completion_callback.h"
+#include "ppapi/c/pp_instance.h"
+#include "ppapi/c/pp_macros.h"
+#include "ppapi/c/pp_resource.h"
+#include "ppapi/c/pp_size.h"
+#include "ppapi/c/pp_stdint.h"
+
+#define PPB_VIDEODECODER_INTERFACE_0_1 "PPB_VideoDecoder;0.1" /* dev */
+/**
+ * @file
+ * This file defines the <code>PPB_VideoDecoder</code> interface.
+ */
+
+
+/**
+ * @addtogroup Interfaces
+ * @{
+ */
+/**
+ * Video decoder interface.
+ *
+ * Typical usage:
+ * - Call Create() to create a new video decoder resource.
+ * - Call Initialize() to initialize it with a 3d graphics context and the
+ *   desired codec profile.
+ * - Call Decode() continuously (waiting for each previous call to complete) to
+ *   push bitstream buffers to the decoder.
+ * - Call GetPicture() continuously (waiting for each previous call to complete)
+ *   to pull decoded pictures from the decoder.
+ * - Call Flush() to signal end of stream to the decoder and perform shutdown
+ *   when it completes.
+ * - Call Reset() to quickly stop the decoder (e.g. to implement Seek) and wait
+ *   for the callback before restarting decoding at another point.
+ * - To destroy the decoder, the plugin should release all of its references to
+ *   it. Any pending callbacks will abort before the decoder is destroyed.
+ *
+ * Available video codecs vary by platform.
+ * All: theora, vorbis, vp8.
+ * Chrome and ChromeOS: aac, h264.
+ * ChromeOS: mpeg4.
+ */
+struct PPB_VideoDecoder_0_1 { /* dev */
+  /**
+   * Creates a new video decoder resource.
+   *
+   * @param[in] instance A <code>PP_Instance</code> identifying the instance
+   * with the video decoder.
+   *
+   * @return A <code>PP_Resource</code> corresponding to a video decoder if
+   * successful or 0 otherwise.
+   */
+  PP_Resource (*Create)(PP_Instance instance);
+  /**
+   * Determines if the given resource is a video decoder.
+   *
+   * @param[in] resource A <code>PP_Resource</code> identifying a resource.
+   *
+   * @return <code>PP_TRUE</code> if the resource is a
+   * <code>PPB_VideoDecoder</code>, <code>PP_FALSE</code> if the resource is
+   * invalid or some other type.
+   */
+  PP_Bool (*IsVideoDecoder)(PP_Resource resource);
+  /**
+   * Initializes a video decoder resource. This should be called after Create()
+   * and before any other functions.
+   *
+   * @param[in] video_decoder A <code>PP_Resource</code> identifying the video
+   * decoder.
+   * @param[in] graphics3d_context A <code>PPB_Graphics3D</code> resource to use
+   * during decoding.
+   * @param[in] profile A <code>PP_VideoProfile</code> specifying the video
+   * codec profile.
+   * @param[in] allow_software_fallback A <code>PP_Bool</code> specifying
+   * whether the decoder can fall back to software decoding if a suitable
+   * hardware decoder isn't available.
+   * @param[in] callback A <code>PP_CompletionCallback</code> to be called upon
+   * completion.
+   *
+   * @return An int32_t containing an error code from <code>pp_errors.h</code>.
+   * Returns PP_ERROR_NOTSUPPORTED if video decoding is not available, or the
+   * requested profile is not supported. In this case, the client may call
+   * Initialize() again with different parameters to find a good configuration.
+   */
+  int32_t (*Initialize)(PP_Resource video_decoder,
+                        PP_Resource graphics3d_context,
+                        PP_VideoProfile profile,
+                        PP_Bool allow_software_fallback,
+                        struct PP_CompletionCallback callback);
+  /**
+   * Decodes a bitstream buffer. Copies |size| bytes of data from the plugin's
+   * |buffer|. The plugin should maintain the buffer and not call Decode() again
+   * until the decoder signals completion by returning PP_OK or by running
+   * |callback|.
+   *
+   * In general, each bitstream buffer should contain a demuxed bitstream frame
+   * for the selected video codec. For example, H264 decoders expect to receive
+   * one AnnexB NAL unit, including the 4 byte start code prefix, while VP8
+   * decoders expect to receive a bitstream frame without the IVF frame header.
+   *
+   * If the call to Decode() eventually results in a picture, the |decode_id|
+   * parameter is copied into the returned picture. The plugin can use this to
+   * associate decoded pictures with Decode() calls (e.g. to assign timestamps
+   * or frame numbers to pictures.) This value is opaque to the API so the
+   * plugin is free to pass any value.
+   *
+   * @param[in] video_decoder A <code>PP_Resource</code> identifying the video
+   * decoder.
+   * @param[in] decode_id An optional value, chosen by the plugin, that can be
+   * used to associate calls to Decode() with decoded pictures returned by
+   * GetPicture().
+   * @param[in] size Buffer size in bytes.
+   * @param[in] buffer Starting address of buffer.
+   * @param[in] callback A <code>PP_CompletionCallback</code> to be called on
+   * completion.
+   *
+   * @return An int32_t containing an error code from <code>pp_errors.h</code>.
+   */
+  int32_t (*Decode)(PP_Resource video_decoder,
+                    uint32_t decode_id,
+                    uint32_t size,
+                    const void* buffer,
+                    struct PP_CompletionCallback callback);
+  /**
+   * Gets the next picture from the decoder. The picture is valid after the
+   * decoder signals completion by returning PP_OK or running |callback|. The
+   * plugin can call GetPicture() again after the decoder signals completion.
+   * When the plugin is finished using the picture, it should return it to the
+   * system by calling RecyclePicture().
+   *
+   * @param[in] video_decoder A <code>PP_Resource</code> identifying the video
+   * decoder.
+   * @param[out] picture A <code>PP_VideoPicture</code> to hold the decoded
+   * picture.
+   * @param[in] callback A <code>PP_CompletionCallback</code> to be called on
+   * completion.
+   *
+   * @return An int32_t containing an error code from <code>pp_errors.h</code>.
+   * Returns PP_OK if a picture is available.
+   * Returns PP_ERROR_ABORTED when Reset() is called, or if a call to Flush()
+   * completes while GetPicture() is pending.
+   */
+  int32_t (*GetPicture)(PP_Resource video_decoder,
+                        struct PP_VideoPicture* picture,
+                        struct PP_CompletionCallback callback);
+  /**
+   * Recycles a picture that the plugin has received from the decoder.
+   * The plugin should call this as soon as it has finished using the texture so
+   * the decoder can decode more pictures.
+   *
+   * @param[in] video_decoder A <code>PP_Resource</code> identifying the video
+   * decoder.
+   * @param[in] picture A <code>PP_VideoPicture</code> to return to
+   * the decoder.
+   */
+  void (*RecyclePicture)(PP_Resource video_decoder,
+                         const struct PP_VideoPicture* picture);
+  /**
+   * Flushes the decoder. The plugin should call this when it reaches the end of
+   * its video stream in order to stop cleanly. The decoder will run all pending
+   * calls to completion. The plugin should make no further calls to the decoder
+   * other than GetPicture() and RecyclePicture() until the decoder signals
+   * completion by running the callback. Just before completion, any pending
+   * GetPicture() call will complete by running the callback with result
+   * PP_ERROR_ABORTED to signal that no more pictures are available.
+   *
+   * @param[in] video_decoder A <code>PP_Resource</code> identifying the video
+   * decoder.
+   * @param[in] callback A <code>PP_CompletionCallback</code> to be called on
+   * completion.
+   *
+   * @return An int32_t containing an error code from <code>pp_errors.h</code>.
+   */
+  int32_t (*Flush)(PP_Resource video_decoder,
+                   struct PP_CompletionCallback callback);
+  /**
+   * Resets the decoder as quickly as possible. The plugin can call Reset() to
+   * skip to another position in the video stream. Pending calls to Decode() and
+   * GetPicture()) are immediately aborted, causing their callbacks to run with
+   * PP_ERROR_ABORTED. The plugin should not make any further calls to the
+   * decoder until the decoder signals completion by running |callback|.
+   *
+   * @param[in] video_decoder A <code>PP_Resource</code> identifying the video
+   * decoder.
+   * @param[in] callback A <code>PP_CompletionCallback</code> to be called on
+   * completion.
+   *
+   * @return An int32_t containing an error code from <code>pp_errors.h</code>.
+   */
+  int32_t (*Reset)(PP_Resource video_decoder,
+                   struct PP_CompletionCallback callback);
+};
+/**
+ * @}
+ */
+
+#endif  /* PPAPI_C_PPB_VIDEO_DECODER_H_ */
+