Index: third_party/libxslt/Makefile.in |
diff --git a/third_party/libxslt/Makefile.in b/third_party/libxslt/Makefile.in |
new file mode 100644 |
index 0000000000000000000000000000000000000000..54a58e0c01ff868355ef662c329dd7fcae8c546b |
--- /dev/null |
+++ b/third_party/libxslt/Makefile.in |
@@ -0,0 +1,1071 @@ |
+# Makefile.in generated by automake 1.14.1 from Makefile.am. |
+# @configure_input@ |
+ |
+# Copyright (C) 1994-2013 Free Software Foundation, Inc. |
+ |
+# This Makefile.in is free software; the Free Software Foundation |
+# gives unlimited permission to copy and/or distribute it, |
+# with or without modifications, as long as this notice is preserved. |
+ |
+# This program is distributed in the hope that it will be useful, |
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
+# PARTICULAR PURPOSE. |
+ |
+@SET_MAKE@ |
+ |
+ |
+VPATH = @srcdir@ |
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' |
+am__make_running_with_option = \ |
+ case $${target_option-} in \ |
+ ?) ;; \ |
+ *) echo "am__make_running_with_option: internal error: invalid" \ |
+ "target option '$${target_option-}' specified" >&2; \ |
+ exit 1;; \ |
+ esac; \ |
+ has_opt=no; \ |
+ sane_makeflags=$$MAKEFLAGS; \ |
+ if $(am__is_gnu_make); then \ |
+ sane_makeflags=$$MFLAGS; \ |
+ else \ |
+ case $$MAKEFLAGS in \ |
+ *\\[\ \ ]*) \ |
+ bs=\\; \ |
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ |
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ |
+ esac; \ |
+ fi; \ |
+ skip_next=no; \ |
+ strip_trailopt () \ |
+ { \ |
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ |
+ }; \ |
+ for flg in $$sane_makeflags; do \ |
+ test $$skip_next = yes && { skip_next=no; continue; }; \ |
+ case $$flg in \ |
+ *=*|--*) continue;; \ |
+ -*I) strip_trailopt 'I'; skip_next=yes;; \ |
+ -*I?*) strip_trailopt 'I';; \ |
+ -*O) strip_trailopt 'O'; skip_next=yes;; \ |
+ -*O?*) strip_trailopt 'O';; \ |
+ -*l) strip_trailopt 'l'; skip_next=yes;; \ |
+ -*l?*) strip_trailopt 'l';; \ |
+ -[dEDm]) skip_next=yes;; \ |
+ -[JT]) skip_next=yes;; \ |
+ esac; \ |
+ case $$flg in \ |
+ *$$target_option*) has_opt=yes; break;; \ |
+ esac; \ |
+ done; \ |
+ test $$has_opt = yes |
+am__make_dryrun = (target_option=n; $(am__make_running_with_option)) |
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) |
+pkgdatadir = $(datadir)/@PACKAGE@ |
+pkgincludedir = $(includedir)/@PACKAGE@ |
+pkglibdir = $(libdir)/@PACKAGE@ |
+pkglibexecdir = $(libexecdir)/@PACKAGE@ |
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
+install_sh_DATA = $(install_sh) -c -m 644 |
+install_sh_PROGRAM = $(install_sh) -c |
+install_sh_SCRIPT = $(install_sh) -c |
+INSTALL_HEADER = $(INSTALL_DATA) |
+transform = $(program_transform_name) |
+NORMAL_INSTALL = : |
+PRE_INSTALL = : |
+POST_INSTALL = : |
+NORMAL_UNINSTALL = : |
+PRE_UNINSTALL = : |
+POST_UNINSTALL = : |
+build_triplet = @build@ |
+host_triplet = @host@ |
+subdir = . |
+DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog COPYING \ |
+ $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ |
+ $(top_srcdir)/configure $(am__configure_deps) \ |
+ $(srcdir)/config.h.in $(srcdir)/libxslt.pc.in \ |
+ $(srcdir)/libexslt.pc.in $(srcdir)/xslt-config.in \ |
+ $(srcdir)/libxslt.spec.in TODO compile config.guess config.sub \ |
+ install-sh missing ltmain.sh |
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
+am__aclocal_m4_deps = $(top_srcdir)/configure.in |
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
+ $(ACLOCAL_M4) |
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ |
+ configure.lineno config.status.lineno |
+mkinstalldirs = $(install_sh) -d |
+CONFIG_HEADER = config.h |
+CONFIG_CLEAN_FILES = libxslt.pc libexslt.pc xslt-config libxslt.spec |
+CONFIG_CLEAN_VPATH_FILES = |
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; |
+am__vpath_adj = case $$p in \ |
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ |
+ *) f=$$p;; \ |
+ esac; |
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; |
+am__install_max = 40 |
+am__nobase_strip_setup = \ |
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` |
+am__nobase_strip = \ |
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" |
+am__nobase_list = $(am__nobase_strip_setup); \ |
+ for p in $$list; do echo "$$p $$p"; done | \ |
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ |
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ |
+ if (++n[$$2] == $(am__install_max)) \ |
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ |
+ END { for (dir in files) print dir, files[dir] }' |
+am__base_list = \ |
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ |
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' |
+am__uninstall_files_from_dir = { \ |
+ test -z "$$files" \ |
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ |
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ |
+ $(am__cd) "$$dir" && rm -f $$files; }; \ |
+ } |
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(confexecdir)" \ |
+ "$(DESTDIR)$(m4datadir)" "$(DESTDIR)$(pkgconfigdir)" |
+SCRIPTS = $(bin_SCRIPTS) |
+AM_V_P = $(am__v_P_@AM_V@) |
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) |
+am__v_P_0 = false |
+am__v_P_1 = : |
+AM_V_GEN = $(am__v_GEN_@AM_V@) |
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) |
+am__v_GEN_0 = @echo " GEN " $@; |
+am__v_GEN_1 = |
+AM_V_at = $(am__v_at_@AM_V@) |
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) |
+am__v_at_0 = @ |
+am__v_at_1 = |
+SOURCES = |
+DIST_SOURCES = |
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ |
+ ctags-recursive dvi-recursive html-recursive info-recursive \ |
+ install-data-recursive install-dvi-recursive \ |
+ install-exec-recursive install-html-recursive \ |
+ install-info-recursive install-pdf-recursive \ |
+ install-ps-recursive install-recursive installcheck-recursive \ |
+ installdirs-recursive pdf-recursive ps-recursive \ |
+ tags-recursive uninstall-recursive |
+am__can_run_installinfo = \ |
+ case $$AM_UPDATE_INFO_DIR in \ |
+ n|no|NO) false;; \ |
+ *) (install-info --version) >/dev/null 2>&1;; \ |
+ esac |
+DATA = $(confexec_DATA) $(m4data_DATA) $(pkgconfig_DATA) |
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ |
+ distclean-recursive maintainer-clean-recursive |
+am__recursive_targets = \ |
+ $(RECURSIVE_TARGETS) \ |
+ $(RECURSIVE_CLEAN_TARGETS) \ |
+ $(am__extra_recursive_targets) |
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ |
+ cscope distdir dist dist-all distcheck |
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ |
+ $(LISP)config.h.in |
+# Read a list of newline-separated strings from the standard input, |
+# and print each of them once, without duplicates. Input order is |
+# *not* preserved. |
+am__uniquify_input = $(AWK) '\ |
+ BEGIN { nonempty = 0; } \ |
+ { items[$$0] = 1; nonempty = 1; } \ |
+ END { if (nonempty) { for (i in items) print i; }; } \ |
+' |
+# Make sure the list of sources is unique. This is necessary because, |
+# e.g., the same source file might be shared among _SOURCES variables |
+# for different programs/libraries. |
+am__define_uniq_tagged_files = \ |
+ list='$(am__tagged_files)'; \ |
+ unique=`for i in $$list; do \ |
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
+ done | $(am__uniquify_input)` |
+ETAGS = etags |
+CTAGS = ctags |
+CSCOPE = cscope |
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
+distdir = $(PACKAGE)-$(VERSION) |
+top_distdir = $(distdir) |
+am__remove_distdir = \ |
+ if test -d "$(distdir)"; then \ |
+ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ |
+ && rm -rf "$(distdir)" \ |
+ || { sleep 5 && rm -rf "$(distdir)"; }; \ |
+ else :; fi |
+am__post_remove_distdir = $(am__remove_distdir) |
+am__relativize = \ |
+ dir0=`pwd`; \ |
+ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ |
+ sed_rest='s,^[^/]*/*,,'; \ |
+ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ |
+ sed_butlast='s,/*[^/]*$$,,'; \ |
+ while test -n "$$dir1"; do \ |
+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ |
+ if test "$$first" != "."; then \ |
+ if test "$$first" = ".."; then \ |
+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ |
+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ |
+ else \ |
+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ |
+ if test "$$first2" = "$$first"; then \ |
+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ |
+ else \ |
+ dir2="../$$dir2"; \ |
+ fi; \ |
+ dir0="$$dir0"/"$$first"; \ |
+ fi; \ |
+ fi; \ |
+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ |
+ done; \ |
+ reldir="$$dir2" |
+DIST_ARCHIVES = $(distdir).tar.gz |
+GZIP_ENV = --best |
+DIST_TARGETS = dist-gzip |
+distuninstallcheck_listfiles = find . -type f -print |
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ |
+ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' |
+distcleancheck_listfiles = find . -type f -print |
+ACLOCAL = @ACLOCAL@ |
+AMTAR = @AMTAR@ |
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ |
+AR = @AR@ |
+AS = @AS@ |
+AUTOCONF = @AUTOCONF@ |
+AUTOHEADER = @AUTOHEADER@ |
+AUTOMAKE = @AUTOMAKE@ |
+AWK = @AWK@ |
+CC = @CC@ |
+CCDEPMODE = @CCDEPMODE@ |
+CFLAGS = @CFLAGS@ |
+CPP = @CPP@ |
+CPPFLAGS = @CPPFLAGS@ |
+CRYPTO_TESTDIR = @CRYPTO_TESTDIR@ |
+CYGPATH_W = @CYGPATH_W@ |
+DEFS = @DEFS@ |
+DEPDIR = @DEPDIR@ |
+DLLTOOL = @DLLTOOL@ |
+DSYMUTIL = @DSYMUTIL@ |
+DUMPBIN = @DUMPBIN@ |
+ECHO_C = @ECHO_C@ |
+ECHO_N = @ECHO_N@ |
+ECHO_T = @ECHO_T@ |
+EGREP = @EGREP@ |
+EXEEXT = @EXEEXT@ |
+EXSLT_INCLUDEDIR = @EXSLT_INCLUDEDIR@ |
+EXSLT_LIBDIR = @EXSLT_LIBDIR@ |
+EXSLT_LIBS = @EXSLT_LIBS@ |
+EXTRA_LIBS = @EXTRA_LIBS@ |
+FGREP = @FGREP@ |
+GREP = @GREP@ |
+HTML_DIR = @HTML_DIR@ |
+INSTALL = @INSTALL@ |
+INSTALL_DATA = @INSTALL_DATA@ |
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
+INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
+LD = @LD@ |
+LDFLAGS = @LDFLAGS@ |
+LIBEXSLT_MAJOR_VERSION = @LIBEXSLT_MAJOR_VERSION@ |
+LIBEXSLT_MICRO_VERSION = @LIBEXSLT_MICRO_VERSION@ |
+LIBEXSLT_MINOR_VERSION = @LIBEXSLT_MINOR_VERSION@ |
+LIBEXSLT_VERSION = @LIBEXSLT_VERSION@ |
+LIBEXSLT_VERSION_EXTRA = @LIBEXSLT_VERSION_EXTRA@ |
+LIBEXSLT_VERSION_INFO = @LIBEXSLT_VERSION_INFO@ |
+LIBEXSLT_VERSION_NUMBER = @LIBEXSLT_VERSION_NUMBER@ |
+LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@ |
+LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@ |
+LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@ |
+LIBOBJS = @LIBOBJS@ |
+LIBS = @LIBS@ |
+LIBTOOL = @LIBTOOL@ |
+LIBXML_CFLAGS = @LIBXML_CFLAGS@ |
+LIBXML_LIBS = @LIBXML_LIBS@ |
+LIBXML_REQUIRED_VERSION = @LIBXML_REQUIRED_VERSION@ |
+LIBXML_SRC = @LIBXML_SRC@ |
+LIBXSLT_DEFAULT_PLUGINS_PATH = @LIBXSLT_DEFAULT_PLUGINS_PATH@ |
+LIBXSLT_MAJOR_MINOR_VERSION = @LIBXSLT_MAJOR_MINOR_VERSION@ |
+LIBXSLT_MAJOR_VERSION = @LIBXSLT_MAJOR_VERSION@ |
+LIBXSLT_MICRO_VERSION = @LIBXSLT_MICRO_VERSION@ |
+LIBXSLT_MINOR_VERSION = @LIBXSLT_MINOR_VERSION@ |
+LIBXSLT_VERSION = @LIBXSLT_VERSION@ |
+LIBXSLT_VERSION_EXTRA = @LIBXSLT_VERSION_EXTRA@ |
+LIBXSLT_VERSION_INFO = @LIBXSLT_VERSION_INFO@ |
+LIBXSLT_VERSION_NUMBER = @LIBXSLT_VERSION_NUMBER@ |
+LIPO = @LIPO@ |
+LN_S = @LN_S@ |
+LTLIBOBJS = @LTLIBOBJS@ |
+MAKEINFO = @MAKEINFO@ |
+MANIFEST_TOOL = @MANIFEST_TOOL@ |
+MKDIR_P = @MKDIR_P@ |
+MV = @MV@ |
+M_LIBS = @M_LIBS@ |
+NM = @NM@ |
+NMEDIT = @NMEDIT@ |
+OBJDUMP = @OBJDUMP@ |
+OBJEXT = @OBJEXT@ |
+OTOOL = @OTOOL@ |
+OTOOL64 = @OTOOL64@ |
+PACKAGE = @PACKAGE@ |
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
+PACKAGE_NAME = @PACKAGE_NAME@ |
+PACKAGE_STRING = @PACKAGE_STRING@ |
+PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
+PACKAGE_URL = @PACKAGE_URL@ |
+PACKAGE_VERSION = @PACKAGE_VERSION@ |
+PATH_SEPARATOR = @PATH_SEPARATOR@ |
+PERL = @PERL@ |
+PYTHON = @PYTHON@ |
+PYTHONSODV = @PYTHONSODV@ |
+PYTHON_INCLUDES = @PYTHON_INCLUDES@ |
+PYTHON_LIBS = @PYTHON_LIBS@ |
+PYTHON_SITE_PACKAGES = @PYTHON_SITE_PACKAGES@ |
+PYTHON_SUBDIR = @PYTHON_SUBDIR@ |
+PYTHON_VERSION = @PYTHON_VERSION@ |
+RANLIB = @RANLIB@ |
+RELDATE = @RELDATE@ |
+RM = @RM@ |
+SED = @SED@ |
+SET_MAKE = @SET_MAKE@ |
+SHELL = @SHELL@ |
+STRIP = @STRIP@ |
+TAR = @TAR@ |
+THREAD_LIBS = @THREAD_LIBS@ |
+VERSION = @VERSION@ |
+VERSION_SCRIPT_FLAGS = @VERSION_SCRIPT_FLAGS@ |
+WIN32_EXTRA_LDFLAGS = @WIN32_EXTRA_LDFLAGS@ |
+WIN32_EXTRA_LIBADD = @WIN32_EXTRA_LIBADD@ |
+WITH_CRYPTO = @WITH_CRYPTO@ |
+WITH_DEBUGGER = @WITH_DEBUGGER@ |
+WITH_MEM_DEBUG = @WITH_MEM_DEBUG@ |
+WITH_MODULES = @WITH_MODULES@ |
+WITH_TRIO = @WITH_TRIO@ |
+WITH_XSLT_DEBUG = @WITH_XSLT_DEBUG@ |
+XMLLINT = @XMLLINT@ |
+XML_CONFIG = @XML_CONFIG@ |
+XSLTPROC = @XSLTPROC@ |
+XSLTPROCDV = @XSLTPROCDV@ |
+XSLT_INCLUDEDIR = @XSLT_INCLUDEDIR@ |
+XSLT_LIBDIR = @XSLT_LIBDIR@ |
+XSLT_LIBS = @XSLT_LIBS@ |
+XSLT_LOCALE_WINAPI = @XSLT_LOCALE_WINAPI@ |
+XSLT_LOCALE_XLOCALE = @XSLT_LOCALE_XLOCALE@ |
+abs_builddir = @abs_builddir@ |
+abs_srcdir = @abs_srcdir@ |
+abs_top_builddir = @abs_top_builddir@ |
+abs_top_srcdir = @abs_top_srcdir@ |
+ac_ct_AR = @ac_ct_AR@ |
+ac_ct_CC = @ac_ct_CC@ |
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ |
+am__include = @am__include@ |
+am__leading_dot = @am__leading_dot@ |
+am__quote = @am__quote@ |
+am__tar = @am__tar@ |
+am__untar = @am__untar@ |
+bindir = @bindir@ |
+build = @build@ |
+build_alias = @build_alias@ |
+build_cpu = @build_cpu@ |
+build_os = @build_os@ |
+build_vendor = @build_vendor@ |
+builddir = @builddir@ |
+datadir = @datadir@ |
+datarootdir = @datarootdir@ |
+docdir = @docdir@ |
+dvidir = @dvidir@ |
+exec_prefix = @exec_prefix@ |
+host = @host@ |
+host_alias = @host_alias@ |
+host_cpu = @host_cpu@ |
+host_os = @host_os@ |
+host_vendor = @host_vendor@ |
+htmldir = @htmldir@ |
+includedir = @includedir@ |
+infodir = @infodir@ |
+install_sh = @install_sh@ |
+libdir = @libdir@ |
+libexecdir = @libexecdir@ |
+localedir = @localedir@ |
+localstatedir = @localstatedir@ |
+mandir = @mandir@ |
+mkdir_p = @mkdir_p@ |
+oldincludedir = @oldincludedir@ |
+pdfdir = @pdfdir@ |
+prefix = @prefix@ |
+program_transform_name = @program_transform_name@ |
+psdir = @psdir@ |
+pythondir = @pythondir@ |
+sbindir = @sbindir@ |
+sharedstatedir = @sharedstatedir@ |
+srcdir = @srcdir@ |
+sysconfdir = @sysconfdir@ |
+target_alias = @target_alias@ |
+top_build_prefix = @top_build_prefix@ |
+top_builddir = @top_builddir@ |
+top_srcdir = @top_srcdir@ |
+SUBDIRS = \ |
+ libxslt \ |
+ libexslt \ |
+ xsltproc \ |
+ doc \ |
+ $(PYTHON_SUBDIR) \ |
+ tests |
+ |
+DIST_SUBDIRS = libxslt libexslt xsltproc python doc tests |
+confexecdir = $(libdir) |
+confexec_DATA = xsltConf.sh |
+bin_SCRIPTS = xslt-config |
+CVS_EXTRA_DIST = |
+EXTRA_DIST = xsltConf.sh.in xslt-config.in libxslt.spec libxslt.spec.in \ |
+ FEATURES TODO Copyright libxslt.m4 \ |
+ win32/libxslt/libxslt.def win32/libxslt/libxslt.dsw \ |
+ win32/libxslt/libxslt_so.dsp win32/libxslt/xsltproc.dsp \ |
+ $(CVS_EXTRA_DIST) |
+ |
+CLEANFILES = xsltConf.sh |
+pkgconfigdir = $(libdir)/pkgconfig |
+pkgconfig_DATA = libxslt.pc libexslt.pc |
+m4datadir = $(datadir)/aclocal |
+m4data_DATA = libxslt.m4 |
+all: config.h |
+ $(MAKE) $(AM_MAKEFLAGS) all-recursive |
+ |
+.SUFFIXES: |
+am--refresh: Makefile |
+ @: |
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) |
+ @for dep in $?; do \ |
+ case '$(am__configure_deps)' in \ |
+ *$$dep*) \ |
+ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ |
+ $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ |
+ && exit 0; \ |
+ exit 1;; \ |
+ esac; \ |
+ done; \ |
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ |
+ $(am__cd) $(top_srcdir) && \ |
+ $(AUTOMAKE) --gnu Makefile |
+.PRECIOUS: Makefile |
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
+ @case '$?' in \ |
+ *config.status*) \ |
+ echo ' $(SHELL) ./config.status'; \ |
+ $(SHELL) ./config.status;; \ |
+ *) \ |
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ |
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ |
+ esac; |
+ |
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
+ $(SHELL) ./config.status --recheck |
+ |
+$(top_srcdir)/configure: $(am__configure_deps) |
+ $(am__cd) $(srcdir) && $(AUTOCONF) |
+$(ACLOCAL_M4): $(am__aclocal_m4_deps) |
+ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) |
+$(am__aclocal_m4_deps): |
+ |
+config.h: stamp-h1 |
+ @test -f $@ || rm -f stamp-h1 |
+ @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 |
+ |
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status |
+ @rm -f stamp-h1 |
+ cd $(top_builddir) && $(SHELL) ./config.status config.h |
+$(srcdir)/config.h.in: $(am__configure_deps) |
+ ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) |
+ rm -f stamp-h1 |
+ touch $@ |
+ |
+distclean-hdr: |
+ -rm -f config.h stamp-h1 |
+libxslt.pc: $(top_builddir)/config.status $(srcdir)/libxslt.pc.in |
+ cd $(top_builddir) && $(SHELL) ./config.status $@ |
+libexslt.pc: $(top_builddir)/config.status $(srcdir)/libexslt.pc.in |
+ cd $(top_builddir) && $(SHELL) ./config.status $@ |
+xslt-config: $(top_builddir)/config.status $(srcdir)/xslt-config.in |
+ cd $(top_builddir) && $(SHELL) ./config.status $@ |
+libxslt.spec: $(top_builddir)/config.status $(srcdir)/libxslt.spec.in |
+ cd $(top_builddir) && $(SHELL) ./config.status $@ |
+install-binSCRIPTS: $(bin_SCRIPTS) |
+ @$(NORMAL_INSTALL) |
+ @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \ |
+ if test -n "$$list"; then \ |
+ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ |
+ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ |
+ fi; \ |
+ for p in $$list; do \ |
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
+ if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ |
+ done | \ |
+ sed -e 'p;s,.*/,,;n' \ |
+ -e 'h;s|.*|.|' \ |
+ -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ |
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ |
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ |
+ if ($$2 == $$4) { files[d] = files[d] " " $$1; \ |
+ if (++n[d] == $(am__install_max)) { \ |
+ print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ |
+ else { print "f", d "/" $$4, $$1 } } \ |
+ END { for (d in files) print "f", d, files[d] }' | \ |
+ while read type dir files; do \ |
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ |
+ test -z "$$files" || { \ |
+ echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \ |
+ $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ |
+ } \ |
+ ; done |
+ |
+uninstall-binSCRIPTS: |
+ @$(NORMAL_UNINSTALL) |
+ @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \ |
+ files=`for p in $$list; do echo "$$p"; done | \ |
+ sed -e 's,.*/,,;$(transform)'`; \ |
+ dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir) |
+ |
+mostlyclean-libtool: |
+ -rm -f *.lo |
+ |
+clean-libtool: |
+ -rm -rf .libs _libs |
+ |
+distclean-libtool: |
+ -rm -f libtool config.lt |
+install-confexecDATA: $(confexec_DATA) |
+ @$(NORMAL_INSTALL) |
+ @list='$(confexec_DATA)'; test -n "$(confexecdir)" || list=; \ |
+ if test -n "$$list"; then \ |
+ echo " $(MKDIR_P) '$(DESTDIR)$(confexecdir)'"; \ |
+ $(MKDIR_P) "$(DESTDIR)$(confexecdir)" || exit 1; \ |
+ fi; \ |
+ for p in $$list; do \ |
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
+ echo "$$d$$p"; \ |
+ done | $(am__base_list) | \ |
+ while read files; do \ |
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(confexecdir)'"; \ |
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(confexecdir)" || exit $$?; \ |
+ done |
+ |
+uninstall-confexecDATA: |
+ @$(NORMAL_UNINSTALL) |
+ @list='$(confexec_DATA)'; test -n "$(confexecdir)" || list=; \ |
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
+ dir='$(DESTDIR)$(confexecdir)'; $(am__uninstall_files_from_dir) |
+install-m4dataDATA: $(m4data_DATA) |
+ @$(NORMAL_INSTALL) |
+ @list='$(m4data_DATA)'; test -n "$(m4datadir)" || list=; \ |
+ if test -n "$$list"; then \ |
+ echo " $(MKDIR_P) '$(DESTDIR)$(m4datadir)'"; \ |
+ $(MKDIR_P) "$(DESTDIR)$(m4datadir)" || exit 1; \ |
+ fi; \ |
+ for p in $$list; do \ |
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
+ echo "$$d$$p"; \ |
+ done | $(am__base_list) | \ |
+ while read files; do \ |
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(m4datadir)'"; \ |
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(m4datadir)" || exit $$?; \ |
+ done |
+ |
+uninstall-m4dataDATA: |
+ @$(NORMAL_UNINSTALL) |
+ @list='$(m4data_DATA)'; test -n "$(m4datadir)" || list=; \ |
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
+ dir='$(DESTDIR)$(m4datadir)'; $(am__uninstall_files_from_dir) |
+install-pkgconfigDATA: $(pkgconfig_DATA) |
+ @$(NORMAL_INSTALL) |
+ @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ |
+ if test -n "$$list"; then \ |
+ echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \ |
+ $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \ |
+ fi; \ |
+ for p in $$list; do \ |
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
+ echo "$$d$$p"; \ |
+ done | $(am__base_list) | \ |
+ while read files; do \ |
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ |
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ |
+ done |
+ |
+uninstall-pkgconfigDATA: |
+ @$(NORMAL_UNINSTALL) |
+ @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ |
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
+ dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir) |
+ |
+# This directory's subdirectories are mostly independent; you can cd |
+# into them and run 'make' without going through this Makefile. |
+# To change the values of 'make' variables: instead of editing Makefiles, |
+# (1) if the variable is set in 'config.status', edit 'config.status' |
+# (which will cause the Makefiles to be regenerated when you run 'make'); |
+# (2) otherwise, pass the desired values on the 'make' command line. |
+$(am__recursive_targets): |
+ @fail=; \ |
+ if $(am__make_keepgoing); then \ |
+ failcom='fail=yes'; \ |
+ else \ |
+ failcom='exit 1'; \ |
+ fi; \ |
+ dot_seen=no; \ |
+ target=`echo $@ | sed s/-recursive//`; \ |
+ case "$@" in \ |
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
+ *) list='$(SUBDIRS)' ;; \ |
+ esac; \ |
+ for subdir in $$list; do \ |
+ echo "Making $$target in $$subdir"; \ |
+ if test "$$subdir" = "."; then \ |
+ dot_seen=yes; \ |
+ local_target="$$target-am"; \ |
+ else \ |
+ local_target="$$target"; \ |
+ fi; \ |
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
+ || eval $$failcom; \ |
+ done; \ |
+ if test "$$dot_seen" = "no"; then \ |
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
+ fi; test -z "$$fail" |
+ |
+ID: $(am__tagged_files) |
+ $(am__define_uniq_tagged_files); mkid -fID $$unique |
+tags: tags-recursive |
+TAGS: tags |
+ |
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) |
+ set x; \ |
+ here=`pwd`; \ |
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ |
+ include_option=--etags-include; \ |
+ empty_fix=.; \ |
+ else \ |
+ include_option=--include; \ |
+ empty_fix=; \ |
+ fi; \ |
+ list='$(SUBDIRS)'; for subdir in $$list; do \ |
+ if test "$$subdir" = .; then :; else \ |
+ test ! -f $$subdir/TAGS || \ |
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ |
+ fi; \ |
+ done; \ |
+ $(am__define_uniq_tagged_files); \ |
+ shift; \ |
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ |
+ test -n "$$unique" || unique=$$empty_fix; \ |
+ if test $$# -gt 0; then \ |
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
+ "$$@" $$unique; \ |
+ else \ |
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
+ $$unique; \ |
+ fi; \ |
+ fi |
+ctags: ctags-recursive |
+ |
+CTAGS: ctags |
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) |
+ $(am__define_uniq_tagged_files); \ |
+ test -z "$(CTAGS_ARGS)$$unique" \ |
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
+ $$unique |
+ |
+GTAGS: |
+ here=`$(am__cd) $(top_builddir) && pwd` \ |
+ && $(am__cd) $(top_srcdir) \ |
+ && gtags -i $(GTAGS_ARGS) "$$here" |
+cscope: cscope.files |
+ test ! -s cscope.files \ |
+ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) |
+clean-cscope: |
+ -rm -f cscope.files |
+cscope.files: clean-cscope cscopelist |
+cscopelist: cscopelist-recursive |
+ |
+cscopelist-am: $(am__tagged_files) |
+ list='$(am__tagged_files)'; \ |
+ case "$(srcdir)" in \ |
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ |
+ *) sdir=$(subdir)/$(srcdir) ;; \ |
+ esac; \ |
+ for i in $$list; do \ |
+ if test -f "$$i"; then \ |
+ echo "$(subdir)/$$i"; \ |
+ else \ |
+ echo "$$sdir/$$i"; \ |
+ fi; \ |
+ done >> $(top_builddir)/cscope.files |
+ |
+distclean-tags: |
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
+ -rm -f cscope.out cscope.in.out cscope.po.out cscope.files |
+ |
+distdir: $(DISTFILES) |
+ $(am__remove_distdir) |
+ test -d "$(distdir)" || mkdir "$(distdir)" |
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
+ list='$(DISTFILES)'; \ |
+ dist_files=`for file in $$list; do echo $$file; done | \ |
+ sed -e "s|^$$srcdirstrip/||;t" \ |
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
+ case $$dist_files in \ |
+ */*) $(MKDIR_P) `echo "$$dist_files" | \ |
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
+ sort -u` ;; \ |
+ esac; \ |
+ for file in $$dist_files; do \ |
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
+ if test -d $$d/$$file; then \ |
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
+ if test -d "$(distdir)/$$file"; then \ |
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
+ fi; \ |
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ |
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
+ fi; \ |
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ |
+ else \ |
+ test -f "$(distdir)/$$file" \ |
+ || cp -p $$d/$$file "$(distdir)/$$file" \ |
+ || exit 1; \ |
+ fi; \ |
+ done |
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ |
+ if test "$$subdir" = .; then :; else \ |
+ $(am__make_dryrun) \ |
+ || test -d "$(distdir)/$$subdir" \ |
+ || $(MKDIR_P) "$(distdir)/$$subdir" \ |
+ || exit 1; \ |
+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ |
+ $(am__relativize); \ |
+ new_distdir=$$reldir; \ |
+ dir1=$$subdir; dir2="$(top_distdir)"; \ |
+ $(am__relativize); \ |
+ new_top_distdir=$$reldir; \ |
+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ |
+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ |
+ ($(am__cd) $$subdir && \ |
+ $(MAKE) $(AM_MAKEFLAGS) \ |
+ top_distdir="$$new_top_distdir" \ |
+ distdir="$$new_distdir" \ |
+ am__remove_distdir=: \ |
+ am__skip_length_check=: \ |
+ am__skip_mode_fix=: \ |
+ distdir) \ |
+ || exit 1; \ |
+ fi; \ |
+ done |
+ $(MAKE) $(AM_MAKEFLAGS) \ |
+ top_distdir="$(top_distdir)" distdir="$(distdir)" \ |
+ dist-hook |
+ -test -n "$(am__skip_mode_fix)" \ |
+ || find "$(distdir)" -type d ! -perm -755 \ |
+ -exec chmod u+rwx,go+rx {} \; -o \ |
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ |
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ |
+ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ |
+ || chmod -R a+r "$(distdir)" |
+dist-gzip: distdir |
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz |
+ $(am__post_remove_distdir) |
+ |
+dist-bzip2: distdir |
+ tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 |
+ $(am__post_remove_distdir) |
+ |
+dist-lzip: distdir |
+ tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz |
+ $(am__post_remove_distdir) |
+ |
+dist-xz: distdir |
+ tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz |
+ $(am__post_remove_distdir) |
+ |
+dist-tarZ: distdir |
+ @echo WARNING: "Support for shar distribution archives is" \ |
+ "deprecated." >&2 |
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 |
+ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z |
+ $(am__post_remove_distdir) |
+ |
+dist-shar: distdir |
+ @echo WARNING: "Support for distribution archives compressed with" \ |
+ "legacy program 'compress' is deprecated." >&2 |
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 |
+ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz |
+ $(am__post_remove_distdir) |
+ |
+dist-zip: distdir |
+ -rm -f $(distdir).zip |
+ zip -rq $(distdir).zip $(distdir) |
+ $(am__post_remove_distdir) |
+ |
+dist dist-all: |
+ $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' |
+ $(am__post_remove_distdir) |
+ |
+# This target untars the dist file and tries a VPATH configuration. Then |
+# it guarantees that the distribution is self-contained by making another |
+# tarfile. |
+distcheck: dist |
+ case '$(DIST_ARCHIVES)' in \ |
+ *.tar.gz*) \ |
+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ |
+ *.tar.bz2*) \ |
+ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ |
+ *.tar.lz*) \ |
+ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ |
+ *.tar.xz*) \ |
+ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ |
+ *.tar.Z*) \ |
+ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ |
+ *.shar.gz*) \ |
+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ |
+ *.zip*) \ |
+ unzip $(distdir).zip ;;\ |
+ esac |
+ chmod -R a-w $(distdir) |
+ chmod u+w $(distdir) |
+ mkdir $(distdir)/_build $(distdir)/_inst |
+ chmod a-w $(distdir) |
+ test -d $(distdir)/_build || exit 0; \ |
+ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ |
+ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ |
+ && am__cwd=`pwd` \ |
+ && $(am__cd) $(distdir)/_build \ |
+ && ../configure \ |
+ $(AM_DISTCHECK_CONFIGURE_FLAGS) \ |
+ $(DISTCHECK_CONFIGURE_FLAGS) \ |
+ --srcdir=.. --prefix="$$dc_install_base" \ |
+ && $(MAKE) $(AM_MAKEFLAGS) \ |
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \ |
+ && $(MAKE) $(AM_MAKEFLAGS) check \ |
+ && $(MAKE) $(AM_MAKEFLAGS) install \ |
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ |
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ |
+ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ |
+ distuninstallcheck \ |
+ && chmod -R a-w "$$dc_install_base" \ |
+ && ({ \ |
+ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ |
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ |
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ |
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ |
+ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ |
+ } || { rm -rf "$$dc_destdir"; exit 1; }) \ |
+ && rm -rf "$$dc_destdir" \ |
+ && $(MAKE) $(AM_MAKEFLAGS) dist \ |
+ && rm -rf $(DIST_ARCHIVES) \ |
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ |
+ && cd "$$am__cwd" \ |
+ || exit 1 |
+ $(am__post_remove_distdir) |
+ @(echo "$(distdir) archives ready for distribution: "; \ |
+ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ |
+ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' |
+distuninstallcheck: |
+ @test -n '$(distuninstallcheck_dir)' || { \ |
+ echo 'ERROR: trying to run $@ with an empty' \ |
+ '$$(distuninstallcheck_dir)' >&2; \ |
+ exit 1; \ |
+ }; \ |
+ $(am__cd) '$(distuninstallcheck_dir)' || { \ |
+ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ |
+ exit 1; \ |
+ }; \ |
+ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ |
+ || { echo "ERROR: files left after uninstall:" ; \ |
+ if test -n "$(DESTDIR)"; then \ |
+ echo " (check DESTDIR support)"; \ |
+ fi ; \ |
+ $(distuninstallcheck_listfiles) ; \ |
+ exit 1; } >&2 |
+distcleancheck: distclean |
+ @if test '$(srcdir)' = . ; then \ |
+ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ |
+ exit 1 ; \ |
+ fi |
+ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ |
+ || { echo "ERROR: files left in build directory after distclean:" ; \ |
+ $(distcleancheck_listfiles) ; \ |
+ exit 1; } >&2 |
+check-am: all-am |
+ $(MAKE) $(AM_MAKEFLAGS) check-local |
+check: check-recursive |
+all-am: Makefile $(SCRIPTS) $(DATA) config.h |
+installdirs: installdirs-recursive |
+installdirs-am: |
+ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(confexecdir)" "$(DESTDIR)$(m4datadir)" "$(DESTDIR)$(pkgconfigdir)"; do \ |
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ |
+ done |
+install: install-recursive |
+install-exec: install-exec-recursive |
+install-data: install-data-recursive |
+uninstall: uninstall-recursive |
+ |
+install-am: all-am |
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
+ |
+installcheck: installcheck-recursive |
+install-strip: |
+ if test -z '$(STRIP)'; then \ |
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
+ install; \ |
+ else \ |
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ |
+ fi |
+mostlyclean-generic: |
+ |
+clean-generic: |
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) |
+ |
+distclean-generic: |
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) |
+ |
+maintainer-clean-generic: |
+ @echo "This command is intended for maintainers to use" |
+ @echo "it deletes files that may require special tools to rebuild." |
+clean: clean-recursive |
+ |
+clean-am: clean-generic clean-libtool mostlyclean-am |
+ |
+distclean: distclean-recursive |
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
+ -rm -f Makefile |
+distclean-am: clean-am distclean-generic distclean-hdr \ |
+ distclean-libtool distclean-tags |
+ |
+dvi: dvi-recursive |
+ |
+dvi-am: |
+ |
+html: html-recursive |
+ |
+html-am: |
+ |
+info: info-recursive |
+ |
+info-am: |
+ |
+install-data-am: install-m4dataDATA install-pkgconfigDATA |
+ |
+install-dvi: install-dvi-recursive |
+ |
+install-dvi-am: |
+ |
+install-exec-am: install-binSCRIPTS install-confexecDATA |
+ |
+install-html: install-html-recursive |
+ |
+install-html-am: |
+ |
+install-info: install-info-recursive |
+ |
+install-info-am: |
+ |
+install-man: |
+ |
+install-pdf: install-pdf-recursive |
+ |
+install-pdf-am: |
+ |
+install-ps: install-ps-recursive |
+ |
+install-ps-am: |
+ |
+installcheck-am: |
+ |
+maintainer-clean: maintainer-clean-recursive |
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
+ -rm -rf $(top_srcdir)/autom4te.cache |
+ -rm -f Makefile |
+maintainer-clean-am: distclean-am maintainer-clean-generic |
+ |
+mostlyclean: mostlyclean-recursive |
+ |
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool |
+ |
+pdf: pdf-recursive |
+ |
+pdf-am: |
+ |
+ps: ps-recursive |
+ |
+ps-am: |
+ |
+uninstall-am: uninstall-binSCRIPTS uninstall-confexecDATA \ |
+ uninstall-m4dataDATA uninstall-pkgconfigDATA |
+ |
+.MAKE: $(am__recursive_targets) all check-am install-am install-strip |
+ |
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ |
+ am--refresh check check-am check-local clean clean-cscope \ |
+ clean-generic clean-libtool cscope cscopelist-am ctags \ |
+ ctags-am dist dist-all dist-bzip2 dist-gzip dist-hook \ |
+ dist-lzip dist-shar dist-tarZ dist-xz dist-zip distcheck \ |
+ distclean distclean-generic distclean-hdr distclean-libtool \ |
+ distclean-tags distcleancheck distdir distuninstallcheck dvi \ |
+ dvi-am html html-am info info-am install install-am \ |
+ install-binSCRIPTS install-confexecDATA install-data \ |
+ install-data-am install-dvi install-dvi-am install-exec \ |
+ install-exec-am install-html install-html-am install-info \ |
+ install-info-am install-m4dataDATA install-man install-pdf \ |
+ install-pdf-am install-pkgconfigDATA install-ps install-ps-am \ |
+ install-strip installcheck installcheck-am installdirs \ |
+ installdirs-am maintainer-clean maintainer-clean-generic \ |
+ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ |
+ ps ps-am tags tags-am uninstall uninstall-am \ |
+ uninstall-binSCRIPTS uninstall-confexecDATA \ |
+ uninstall-m4dataDATA uninstall-pkgconfigDATA |
+ |
+ |
+dist-hook: cleanup libxslt.spec |
+ touch $(distdir)/doc/*.xml |
+ touch $(distdir)/doc/EXSLT/*.xml |
+ touch $(distdir)/libxslt/*.syms |
+ (cd $(srcdir) ; tar -cf - --exclude CVS --exclude .svn win32 vms examples) | (cd $(distdir); tar xf -) |
+ |
+xsltConf.sh: xsltConf.sh.in Makefile |
+ sed -e 's?\@XSLT_LIBDIR\@?$(XSLT_LIBDIR)?g' \ |
+ -e 's?\@XSLT_INCLUDEDIR\@?$(XSLT_INCLUDEDIR)?g' \ |
+ -e 's?\@VERSION\@?$(VERSION)?g' \ |
+ -e 's?\@XSLT_LIBS\@?$(XSLT_LIBS) $(EXTRA_LIBS)?g' \ |
+ < $(srcdir)/xsltConf.sh.in > xsltConf.tmp \ |
+ && mv xsltConf.tmp xsltConf.sh |
+ |
+check-local: tests |
+ |
+dummy: |
+ |
+tests: dummy |
+ @echo '## Running the regression test suite' |
+ @(cd tests ; $(MAKE) tests) |
+ @(cd xsltproc ; $(MAKE) tests) |
+ @(if [ "$(PYTHON_SUBDIR)" != "" ] ; then cd python ; $(MAKE) tests ; fi) |
+ |
+valgrind: |
+ @echo '## Running the regression tests under Valgrind' |
+ @echo '## Go get a cup of coffee it is gonna take a while ...' |
+ @(cd tests ; $(MAKE) CHECKER='valgrind -q' tests) |
+ @(cd xsltproc ; $(MAKE) CHECKER='valgrind -q' tests) |
+ |
+cleanup: |
+ -@(find . -name .\#\* -exec rm {} \;) |
+ |
+cleantar: |
+ @(rm -f libxslt*.tar.gz) |
+ |
+rpm: cleantar |
+ @(unset CDPATH ; $(MAKE) dist && rpmbuild -ta $(distdir).tar.gz) |
+ |
+# Tell versions [3.59,3.63) of GNU make to not export all variables. |
+# Otherwise a system limit (for SysV at least) may be exceeded. |
+.NOEXPORT: |