OLD | NEW |
(Empty) | |
| 1 # Makefile.in generated by automake 1.14.1 from Makefile.am. |
| 2 # @configure_input@ |
| 3 |
| 4 # Copyright (C) 1994-2013 Free Software Foundation, Inc. |
| 5 |
| 6 # This Makefile.in is free software; the Free Software Foundation |
| 7 # gives unlimited permission to copy and/or distribute it, |
| 8 # with or without modifications, as long as this notice is preserved. |
| 9 |
| 10 # This program is distributed in the hope that it will be useful, |
| 11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| 12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| 13 # PARTICULAR PURPOSE. |
| 14 |
| 15 @SET_MAKE@ |
| 16 |
| 17 |
| 18 VPATH = @srcdir@ |
| 19 am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' |
| 20 am__make_running_with_option = \ |
| 21 case $${target_option-} in \ |
| 22 ?) ;; \ |
| 23 *) echo "am__make_running_with_option: internal error: invalid" \ |
| 24 "target option '$${target_option-}' specified" >&2; \ |
| 25 exit 1;; \ |
| 26 esac; \ |
| 27 has_opt=no; \ |
| 28 sane_makeflags=$$MAKEFLAGS; \ |
| 29 if $(am__is_gnu_make); then \ |
| 30 sane_makeflags=$$MFLAGS; \ |
| 31 else \ |
| 32 case $$MAKEFLAGS in \ |
| 33 *\\[\ \ ]*) \ |
| 34 bs=\\; \ |
| 35 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ |
| 36 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ |
| 37 esac; \ |
| 38 fi; \ |
| 39 skip_next=no; \ |
| 40 strip_trailopt () \ |
| 41 { \ |
| 42 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ |
| 43 }; \ |
| 44 for flg in $$sane_makeflags; do \ |
| 45 test $$skip_next = yes && { skip_next=no; continue; }; \ |
| 46 case $$flg in \ |
| 47 *=*|--*) continue;; \ |
| 48 -*I) strip_trailopt 'I'; skip_next=yes;; \ |
| 49 -*I?*) strip_trailopt 'I';; \ |
| 50 -*O) strip_trailopt 'O'; skip_next=yes;; \ |
| 51 -*O?*) strip_trailopt 'O';; \ |
| 52 -*l) strip_trailopt 'l'; skip_next=yes;; \ |
| 53 -*l?*) strip_trailopt 'l';; \ |
| 54 -[dEDm]) skip_next=yes;; \ |
| 55 -[JT]) skip_next=yes;; \ |
| 56 esac; \ |
| 57 case $$flg in \ |
| 58 *$$target_option*) has_opt=yes; break;; \ |
| 59 esac; \ |
| 60 done; \ |
| 61 test $$has_opt = yes |
| 62 am__make_dryrun = (target_option=n; $(am__make_running_with_option)) |
| 63 am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) |
| 64 pkgdatadir = $(datadir)/@PACKAGE@ |
| 65 pkgincludedir = $(includedir)/@PACKAGE@ |
| 66 pkglibdir = $(libdir)/@PACKAGE@ |
| 67 pkglibexecdir = $(libexecdir)/@PACKAGE@ |
| 68 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| 69 install_sh_DATA = $(install_sh) -c -m 644 |
| 70 install_sh_PROGRAM = $(install_sh) -c |
| 71 install_sh_SCRIPT = $(install_sh) -c |
| 72 INSTALL_HEADER = $(INSTALL_DATA) |
| 73 transform = $(program_transform_name) |
| 74 NORMAL_INSTALL = : |
| 75 PRE_INSTALL = : |
| 76 POST_INSTALL = : |
| 77 NORMAL_UNINSTALL = : |
| 78 PRE_UNINSTALL = : |
| 79 POST_UNINSTALL = : |
| 80 build_triplet = @build@ |
| 81 host_triplet = @host@ |
| 82 subdir = . |
| 83 DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog COPYING \ |
| 84 $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ |
| 85 $(top_srcdir)/configure $(am__configure_deps) \ |
| 86 $(srcdir)/config.h.in $(srcdir)/libxslt.pc.in \ |
| 87 $(srcdir)/libexslt.pc.in $(srcdir)/xslt-config.in \ |
| 88 $(srcdir)/libxslt.spec.in TODO compile config.guess config.sub \ |
| 89 install-sh missing ltmain.sh |
| 90 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| 91 am__aclocal_m4_deps = $(top_srcdir)/configure.in |
| 92 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| 93 $(ACLOCAL_M4) |
| 94 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ |
| 95 configure.lineno config.status.lineno |
| 96 mkinstalldirs = $(install_sh) -d |
| 97 CONFIG_HEADER = config.h |
| 98 CONFIG_CLEAN_FILES = libxslt.pc libexslt.pc xslt-config libxslt.spec |
| 99 CONFIG_CLEAN_VPATH_FILES = |
| 100 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; |
| 101 am__vpath_adj = case $$p in \ |
| 102 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ |
| 103 *) f=$$p;; \ |
| 104 esac; |
| 105 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; |
| 106 am__install_max = 40 |
| 107 am__nobase_strip_setup = \ |
| 108 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` |
| 109 am__nobase_strip = \ |
| 110 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" |
| 111 am__nobase_list = $(am__nobase_strip_setup); \ |
| 112 for p in $$list; do echo "$$p $$p"; done | \ |
| 113 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ |
| 114 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ |
| 115 if (++n[$$2] == $(am__install_max)) \ |
| 116 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ |
| 117 END { for (dir in files) print dir, files[dir] }' |
| 118 am__base_list = \ |
| 119 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ |
| 120 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' |
| 121 am__uninstall_files_from_dir = { \ |
| 122 test -z "$$files" \ |
| 123 || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ |
| 124 || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ |
| 125 $(am__cd) "$$dir" && rm -f $$files; }; \ |
| 126 } |
| 127 am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(confexecdir)" \ |
| 128 "$(DESTDIR)$(m4datadir)" "$(DESTDIR)$(pkgconfigdir)" |
| 129 SCRIPTS = $(bin_SCRIPTS) |
| 130 AM_V_P = $(am__v_P_@AM_V@) |
| 131 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) |
| 132 am__v_P_0 = false |
| 133 am__v_P_1 = : |
| 134 AM_V_GEN = $(am__v_GEN_@AM_V@) |
| 135 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) |
| 136 am__v_GEN_0 = @echo " GEN " $@; |
| 137 am__v_GEN_1 = |
| 138 AM_V_at = $(am__v_at_@AM_V@) |
| 139 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) |
| 140 am__v_at_0 = @ |
| 141 am__v_at_1 = |
| 142 SOURCES = |
| 143 DIST_SOURCES = |
| 144 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ |
| 145 ctags-recursive dvi-recursive html-recursive info-recursive \ |
| 146 install-data-recursive install-dvi-recursive \ |
| 147 install-exec-recursive install-html-recursive \ |
| 148 install-info-recursive install-pdf-recursive \ |
| 149 install-ps-recursive install-recursive installcheck-recursive \ |
| 150 installdirs-recursive pdf-recursive ps-recursive \ |
| 151 tags-recursive uninstall-recursive |
| 152 am__can_run_installinfo = \ |
| 153 case $$AM_UPDATE_INFO_DIR in \ |
| 154 n|no|NO) false;; \ |
| 155 *) (install-info --version) >/dev/null 2>&1;; \ |
| 156 esac |
| 157 DATA = $(confexec_DATA) $(m4data_DATA) $(pkgconfig_DATA) |
| 158 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ |
| 159 distclean-recursive maintainer-clean-recursive |
| 160 am__recursive_targets = \ |
| 161 $(RECURSIVE_TARGETS) \ |
| 162 $(RECURSIVE_CLEAN_TARGETS) \ |
| 163 $(am__extra_recursive_targets) |
| 164 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ |
| 165 cscope distdir dist dist-all distcheck |
| 166 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ |
| 167 $(LISP)config.h.in |
| 168 # Read a list of newline-separated strings from the standard input, |
| 169 # and print each of them once, without duplicates. Input order is |
| 170 # *not* preserved. |
| 171 am__uniquify_input = $(AWK) '\ |
| 172 BEGIN { nonempty = 0; } \ |
| 173 { items[$$0] = 1; nonempty = 1; } \ |
| 174 END { if (nonempty) { for (i in items) print i; }; } \ |
| 175 ' |
| 176 # Make sure the list of sources is unique. This is necessary because, |
| 177 # e.g., the same source file might be shared among _SOURCES variables |
| 178 # for different programs/libraries. |
| 179 am__define_uniq_tagged_files = \ |
| 180 list='$(am__tagged_files)'; \ |
| 181 unique=`for i in $$list; do \ |
| 182 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| 183 done | $(am__uniquify_input)` |
| 184 ETAGS = etags |
| 185 CTAGS = ctags |
| 186 CSCOPE = cscope |
| 187 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| 188 distdir = $(PACKAGE)-$(VERSION) |
| 189 top_distdir = $(distdir) |
| 190 am__remove_distdir = \ |
| 191 if test -d "$(distdir)"; then \ |
| 192 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ |
| 193 && rm -rf "$(distdir)" \ |
| 194 || { sleep 5 && rm -rf "$(distdir)"; }; \ |
| 195 else :; fi |
| 196 am__post_remove_distdir = $(am__remove_distdir) |
| 197 am__relativize = \ |
| 198 dir0=`pwd`; \ |
| 199 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ |
| 200 sed_rest='s,^[^/]*/*,,'; \ |
| 201 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ |
| 202 sed_butlast='s,/*[^/]*$$,,'; \ |
| 203 while test -n "$$dir1"; do \ |
| 204 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ |
| 205 if test "$$first" != "."; then \ |
| 206 if test "$$first" = ".."; then \ |
| 207 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ |
| 208 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ |
| 209 else \ |
| 210 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ |
| 211 if test "$$first2" = "$$first"; then \ |
| 212 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ |
| 213 else \ |
| 214 dir2="../$$dir2"; \ |
| 215 fi; \ |
| 216 dir0="$$dir0"/"$$first"; \ |
| 217 fi; \ |
| 218 fi; \ |
| 219 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ |
| 220 done; \ |
| 221 reldir="$$dir2" |
| 222 DIST_ARCHIVES = $(distdir).tar.gz |
| 223 GZIP_ENV = --best |
| 224 DIST_TARGETS = dist-gzip |
| 225 distuninstallcheck_listfiles = find . -type f -print |
| 226 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ |
| 227 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' |
| 228 distcleancheck_listfiles = find . -type f -print |
| 229 ACLOCAL = @ACLOCAL@ |
| 230 AMTAR = @AMTAR@ |
| 231 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ |
| 232 AR = @AR@ |
| 233 AS = @AS@ |
| 234 AUTOCONF = @AUTOCONF@ |
| 235 AUTOHEADER = @AUTOHEADER@ |
| 236 AUTOMAKE = @AUTOMAKE@ |
| 237 AWK = @AWK@ |
| 238 CC = @CC@ |
| 239 CCDEPMODE = @CCDEPMODE@ |
| 240 CFLAGS = @CFLAGS@ |
| 241 CPP = @CPP@ |
| 242 CPPFLAGS = @CPPFLAGS@ |
| 243 CRYPTO_TESTDIR = @CRYPTO_TESTDIR@ |
| 244 CYGPATH_W = @CYGPATH_W@ |
| 245 DEFS = @DEFS@ |
| 246 DEPDIR = @DEPDIR@ |
| 247 DLLTOOL = @DLLTOOL@ |
| 248 DSYMUTIL = @DSYMUTIL@ |
| 249 DUMPBIN = @DUMPBIN@ |
| 250 ECHO_C = @ECHO_C@ |
| 251 ECHO_N = @ECHO_N@ |
| 252 ECHO_T = @ECHO_T@ |
| 253 EGREP = @EGREP@ |
| 254 EXEEXT = @EXEEXT@ |
| 255 EXSLT_INCLUDEDIR = @EXSLT_INCLUDEDIR@ |
| 256 EXSLT_LIBDIR = @EXSLT_LIBDIR@ |
| 257 EXSLT_LIBS = @EXSLT_LIBS@ |
| 258 EXTRA_LIBS = @EXTRA_LIBS@ |
| 259 FGREP = @FGREP@ |
| 260 GREP = @GREP@ |
| 261 HTML_DIR = @HTML_DIR@ |
| 262 INSTALL = @INSTALL@ |
| 263 INSTALL_DATA = @INSTALL_DATA@ |
| 264 INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| 265 INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| 266 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| 267 LD = @LD@ |
| 268 LDFLAGS = @LDFLAGS@ |
| 269 LIBEXSLT_MAJOR_VERSION = @LIBEXSLT_MAJOR_VERSION@ |
| 270 LIBEXSLT_MICRO_VERSION = @LIBEXSLT_MICRO_VERSION@ |
| 271 LIBEXSLT_MINOR_VERSION = @LIBEXSLT_MINOR_VERSION@ |
| 272 LIBEXSLT_VERSION = @LIBEXSLT_VERSION@ |
| 273 LIBEXSLT_VERSION_EXTRA = @LIBEXSLT_VERSION_EXTRA@ |
| 274 LIBEXSLT_VERSION_INFO = @LIBEXSLT_VERSION_INFO@ |
| 275 LIBEXSLT_VERSION_NUMBER = @LIBEXSLT_VERSION_NUMBER@ |
| 276 LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@ |
| 277 LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@ |
| 278 LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@ |
| 279 LIBOBJS = @LIBOBJS@ |
| 280 LIBS = @LIBS@ |
| 281 LIBTOOL = @LIBTOOL@ |
| 282 LIBXML_CFLAGS = @LIBXML_CFLAGS@ |
| 283 LIBXML_LIBS = @LIBXML_LIBS@ |
| 284 LIBXML_REQUIRED_VERSION = @LIBXML_REQUIRED_VERSION@ |
| 285 LIBXML_SRC = @LIBXML_SRC@ |
| 286 LIBXSLT_DEFAULT_PLUGINS_PATH = @LIBXSLT_DEFAULT_PLUGINS_PATH@ |
| 287 LIBXSLT_MAJOR_MINOR_VERSION = @LIBXSLT_MAJOR_MINOR_VERSION@ |
| 288 LIBXSLT_MAJOR_VERSION = @LIBXSLT_MAJOR_VERSION@ |
| 289 LIBXSLT_MICRO_VERSION = @LIBXSLT_MICRO_VERSION@ |
| 290 LIBXSLT_MINOR_VERSION = @LIBXSLT_MINOR_VERSION@ |
| 291 LIBXSLT_VERSION = @LIBXSLT_VERSION@ |
| 292 LIBXSLT_VERSION_EXTRA = @LIBXSLT_VERSION_EXTRA@ |
| 293 LIBXSLT_VERSION_INFO = @LIBXSLT_VERSION_INFO@ |
| 294 LIBXSLT_VERSION_NUMBER = @LIBXSLT_VERSION_NUMBER@ |
| 295 LIPO = @LIPO@ |
| 296 LN_S = @LN_S@ |
| 297 LTLIBOBJS = @LTLIBOBJS@ |
| 298 MAKEINFO = @MAKEINFO@ |
| 299 MANIFEST_TOOL = @MANIFEST_TOOL@ |
| 300 MKDIR_P = @MKDIR_P@ |
| 301 MV = @MV@ |
| 302 M_LIBS = @M_LIBS@ |
| 303 NM = @NM@ |
| 304 NMEDIT = @NMEDIT@ |
| 305 OBJDUMP = @OBJDUMP@ |
| 306 OBJEXT = @OBJEXT@ |
| 307 OTOOL = @OTOOL@ |
| 308 OTOOL64 = @OTOOL64@ |
| 309 PACKAGE = @PACKAGE@ |
| 310 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| 311 PACKAGE_NAME = @PACKAGE_NAME@ |
| 312 PACKAGE_STRING = @PACKAGE_STRING@ |
| 313 PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| 314 PACKAGE_URL = @PACKAGE_URL@ |
| 315 PACKAGE_VERSION = @PACKAGE_VERSION@ |
| 316 PATH_SEPARATOR = @PATH_SEPARATOR@ |
| 317 PERL = @PERL@ |
| 318 PYTHON = @PYTHON@ |
| 319 PYTHONSODV = @PYTHONSODV@ |
| 320 PYTHON_INCLUDES = @PYTHON_INCLUDES@ |
| 321 PYTHON_LIBS = @PYTHON_LIBS@ |
| 322 PYTHON_SITE_PACKAGES = @PYTHON_SITE_PACKAGES@ |
| 323 PYTHON_SUBDIR = @PYTHON_SUBDIR@ |
| 324 PYTHON_VERSION = @PYTHON_VERSION@ |
| 325 RANLIB = @RANLIB@ |
| 326 RELDATE = @RELDATE@ |
| 327 RM = @RM@ |
| 328 SED = @SED@ |
| 329 SET_MAKE = @SET_MAKE@ |
| 330 SHELL = @SHELL@ |
| 331 STRIP = @STRIP@ |
| 332 TAR = @TAR@ |
| 333 THREAD_LIBS = @THREAD_LIBS@ |
| 334 VERSION = @VERSION@ |
| 335 VERSION_SCRIPT_FLAGS = @VERSION_SCRIPT_FLAGS@ |
| 336 WIN32_EXTRA_LDFLAGS = @WIN32_EXTRA_LDFLAGS@ |
| 337 WIN32_EXTRA_LIBADD = @WIN32_EXTRA_LIBADD@ |
| 338 WITH_CRYPTO = @WITH_CRYPTO@ |
| 339 WITH_DEBUGGER = @WITH_DEBUGGER@ |
| 340 WITH_MEM_DEBUG = @WITH_MEM_DEBUG@ |
| 341 WITH_MODULES = @WITH_MODULES@ |
| 342 WITH_TRIO = @WITH_TRIO@ |
| 343 WITH_XSLT_DEBUG = @WITH_XSLT_DEBUG@ |
| 344 XMLLINT = @XMLLINT@ |
| 345 XML_CONFIG = @XML_CONFIG@ |
| 346 XSLTPROC = @XSLTPROC@ |
| 347 XSLTPROCDV = @XSLTPROCDV@ |
| 348 XSLT_INCLUDEDIR = @XSLT_INCLUDEDIR@ |
| 349 XSLT_LIBDIR = @XSLT_LIBDIR@ |
| 350 XSLT_LIBS = @XSLT_LIBS@ |
| 351 XSLT_LOCALE_WINAPI = @XSLT_LOCALE_WINAPI@ |
| 352 XSLT_LOCALE_XLOCALE = @XSLT_LOCALE_XLOCALE@ |
| 353 abs_builddir = @abs_builddir@ |
| 354 abs_srcdir = @abs_srcdir@ |
| 355 abs_top_builddir = @abs_top_builddir@ |
| 356 abs_top_srcdir = @abs_top_srcdir@ |
| 357 ac_ct_AR = @ac_ct_AR@ |
| 358 ac_ct_CC = @ac_ct_CC@ |
| 359 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ |
| 360 am__include = @am__include@ |
| 361 am__leading_dot = @am__leading_dot@ |
| 362 am__quote = @am__quote@ |
| 363 am__tar = @am__tar@ |
| 364 am__untar = @am__untar@ |
| 365 bindir = @bindir@ |
| 366 build = @build@ |
| 367 build_alias = @build_alias@ |
| 368 build_cpu = @build_cpu@ |
| 369 build_os = @build_os@ |
| 370 build_vendor = @build_vendor@ |
| 371 builddir = @builddir@ |
| 372 datadir = @datadir@ |
| 373 datarootdir = @datarootdir@ |
| 374 docdir = @docdir@ |
| 375 dvidir = @dvidir@ |
| 376 exec_prefix = @exec_prefix@ |
| 377 host = @host@ |
| 378 host_alias = @host_alias@ |
| 379 host_cpu = @host_cpu@ |
| 380 host_os = @host_os@ |
| 381 host_vendor = @host_vendor@ |
| 382 htmldir = @htmldir@ |
| 383 includedir = @includedir@ |
| 384 infodir = @infodir@ |
| 385 install_sh = @install_sh@ |
| 386 libdir = @libdir@ |
| 387 libexecdir = @libexecdir@ |
| 388 localedir = @localedir@ |
| 389 localstatedir = @localstatedir@ |
| 390 mandir = @mandir@ |
| 391 mkdir_p = @mkdir_p@ |
| 392 oldincludedir = @oldincludedir@ |
| 393 pdfdir = @pdfdir@ |
| 394 prefix = @prefix@ |
| 395 program_transform_name = @program_transform_name@ |
| 396 psdir = @psdir@ |
| 397 pythondir = @pythondir@ |
| 398 sbindir = @sbindir@ |
| 399 sharedstatedir = @sharedstatedir@ |
| 400 srcdir = @srcdir@ |
| 401 sysconfdir = @sysconfdir@ |
| 402 target_alias = @target_alias@ |
| 403 top_build_prefix = @top_build_prefix@ |
| 404 top_builddir = @top_builddir@ |
| 405 top_srcdir = @top_srcdir@ |
| 406 SUBDIRS = \ |
| 407 libxslt \ |
| 408 libexslt \ |
| 409 xsltproc \ |
| 410 doc \ |
| 411 $(PYTHON_SUBDIR) \ |
| 412 tests |
| 413 |
| 414 DIST_SUBDIRS = libxslt libexslt xsltproc python doc tests |
| 415 confexecdir = $(libdir) |
| 416 confexec_DATA = xsltConf.sh |
| 417 bin_SCRIPTS = xslt-config |
| 418 CVS_EXTRA_DIST = |
| 419 EXTRA_DIST = xsltConf.sh.in xslt-config.in libxslt.spec libxslt.spec.in \ |
| 420 FEATURES TODO Copyright libxslt.m4 \ |
| 421 win32/libxslt/libxslt.def win32/libxslt/libxslt.dsw \ |
| 422 win32/libxslt/libxslt_so.dsp win32/libxslt/xsltproc.dsp \ |
| 423 $(CVS_EXTRA_DIST) |
| 424 |
| 425 CLEANFILES = xsltConf.sh |
| 426 pkgconfigdir = $(libdir)/pkgconfig |
| 427 pkgconfig_DATA = libxslt.pc libexslt.pc |
| 428 m4datadir = $(datadir)/aclocal |
| 429 m4data_DATA = libxslt.m4 |
| 430 all: config.h |
| 431 $(MAKE) $(AM_MAKEFLAGS) all-recursive |
| 432 |
| 433 .SUFFIXES: |
| 434 am--refresh: Makefile |
| 435 @: |
| 436 $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) |
| 437 @for dep in $?; do \ |
| 438 case '$(am__configure_deps)' in \ |
| 439 *$$dep*) \ |
| 440 echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ |
| 441 $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ |
| 442 && exit 0; \ |
| 443 exit 1;; \ |
| 444 esac; \ |
| 445 done; \ |
| 446 echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ |
| 447 $(am__cd) $(top_srcdir) && \ |
| 448 $(AUTOMAKE) --gnu Makefile |
| 449 .PRECIOUS: Makefile |
| 450 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| 451 @case '$?' in \ |
| 452 *config.status*) \ |
| 453 echo ' $(SHELL) ./config.status'; \ |
| 454 $(SHELL) ./config.status;; \ |
| 455 *) \ |
| 456 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfi
les_maybe)'; \ |
| 457 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_may
be);; \ |
| 458 esac; |
| 459 |
| 460 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENC
IES) |
| 461 $(SHELL) ./config.status --recheck |
| 462 |
| 463 $(top_srcdir)/configure: $(am__configure_deps) |
| 464 $(am__cd) $(srcdir) && $(AUTOCONF) |
| 465 $(ACLOCAL_M4): $(am__aclocal_m4_deps) |
| 466 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) |
| 467 $(am__aclocal_m4_deps): |
| 468 |
| 469 config.h: stamp-h1 |
| 470 @test -f $@ || rm -f stamp-h1 |
| 471 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 |
| 472 |
| 473 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status |
| 474 @rm -f stamp-h1 |
| 475 cd $(top_builddir) && $(SHELL) ./config.status config.h |
| 476 $(srcdir)/config.h.in: $(am__configure_deps) |
| 477 ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) |
| 478 rm -f stamp-h1 |
| 479 touch $@ |
| 480 |
| 481 distclean-hdr: |
| 482 -rm -f config.h stamp-h1 |
| 483 libxslt.pc: $(top_builddir)/config.status $(srcdir)/libxslt.pc.in |
| 484 cd $(top_builddir) && $(SHELL) ./config.status $@ |
| 485 libexslt.pc: $(top_builddir)/config.status $(srcdir)/libexslt.pc.in |
| 486 cd $(top_builddir) && $(SHELL) ./config.status $@ |
| 487 xslt-config: $(top_builddir)/config.status $(srcdir)/xslt-config.in |
| 488 cd $(top_builddir) && $(SHELL) ./config.status $@ |
| 489 libxslt.spec: $(top_builddir)/config.status $(srcdir)/libxslt.spec.in |
| 490 cd $(top_builddir) && $(SHELL) ./config.status $@ |
| 491 install-binSCRIPTS: $(bin_SCRIPTS) |
| 492 @$(NORMAL_INSTALL) |
| 493 @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \ |
| 494 if test -n "$$list"; then \ |
| 495 echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ |
| 496 $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ |
| 497 fi; \ |
| 498 for p in $$list; do \ |
| 499 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| 500 if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ |
| 501 done | \ |
| 502 sed -e 'p;s,.*/,,;n' \ |
| 503 -e 'h;s|.*|.|' \ |
| 504 -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ |
| 505 $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ |
| 506 { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ |
| 507 if ($$2 == $$4) { files[d] = files[d] " " $$1; \ |
| 508 if (++n[d] == $(am__install_max)) { \ |
| 509 print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ |
| 510 else { print "f", d "/" $$4, $$1 } } \ |
| 511 END { for (d in files) print "f", d, files[d] }' | \ |
| 512 while read type dir files; do \ |
| 513 if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ |
| 514 test -z "$$files" || { \ |
| 515 echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \ |
| 516 $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?;
\ |
| 517 } \ |
| 518 ; done |
| 519 |
| 520 uninstall-binSCRIPTS: |
| 521 @$(NORMAL_UNINSTALL) |
| 522 @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \ |
| 523 files=`for p in $$list; do echo "$$p"; done | \ |
| 524 sed -e 's,.*/,,;$(transform)'`; \ |
| 525 dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir) |
| 526 |
| 527 mostlyclean-libtool: |
| 528 -rm -f *.lo |
| 529 |
| 530 clean-libtool: |
| 531 -rm -rf .libs _libs |
| 532 |
| 533 distclean-libtool: |
| 534 -rm -f libtool config.lt |
| 535 install-confexecDATA: $(confexec_DATA) |
| 536 @$(NORMAL_INSTALL) |
| 537 @list='$(confexec_DATA)'; test -n "$(confexecdir)" || list=; \ |
| 538 if test -n "$$list"; then \ |
| 539 echo " $(MKDIR_P) '$(DESTDIR)$(confexecdir)'"; \ |
| 540 $(MKDIR_P) "$(DESTDIR)$(confexecdir)" || exit 1; \ |
| 541 fi; \ |
| 542 for p in $$list; do \ |
| 543 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| 544 echo "$$d$$p"; \ |
| 545 done | $(am__base_list) | \ |
| 546 while read files; do \ |
| 547 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(confexecdir)'"; \ |
| 548 $(INSTALL_DATA) $$files "$(DESTDIR)$(confexecdir)" || exit $$?; \ |
| 549 done |
| 550 |
| 551 uninstall-confexecDATA: |
| 552 @$(NORMAL_UNINSTALL) |
| 553 @list='$(confexec_DATA)'; test -n "$(confexecdir)" || list=; \ |
| 554 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| 555 dir='$(DESTDIR)$(confexecdir)'; $(am__uninstall_files_from_dir) |
| 556 install-m4dataDATA: $(m4data_DATA) |
| 557 @$(NORMAL_INSTALL) |
| 558 @list='$(m4data_DATA)'; test -n "$(m4datadir)" || list=; \ |
| 559 if test -n "$$list"; then \ |
| 560 echo " $(MKDIR_P) '$(DESTDIR)$(m4datadir)'"; \ |
| 561 $(MKDIR_P) "$(DESTDIR)$(m4datadir)" || exit 1; \ |
| 562 fi; \ |
| 563 for p in $$list; do \ |
| 564 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| 565 echo "$$d$$p"; \ |
| 566 done | $(am__base_list) | \ |
| 567 while read files; do \ |
| 568 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(m4datadir)'"; \ |
| 569 $(INSTALL_DATA) $$files "$(DESTDIR)$(m4datadir)" || exit $$?; \ |
| 570 done |
| 571 |
| 572 uninstall-m4dataDATA: |
| 573 @$(NORMAL_UNINSTALL) |
| 574 @list='$(m4data_DATA)'; test -n "$(m4datadir)" || list=; \ |
| 575 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| 576 dir='$(DESTDIR)$(m4datadir)'; $(am__uninstall_files_from_dir) |
| 577 install-pkgconfigDATA: $(pkgconfig_DATA) |
| 578 @$(NORMAL_INSTALL) |
| 579 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ |
| 580 if test -n "$$list"; then \ |
| 581 echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \ |
| 582 $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \ |
| 583 fi; \ |
| 584 for p in $$list; do \ |
| 585 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| 586 echo "$$d$$p"; \ |
| 587 done | $(am__base_list) | \ |
| 588 while read files; do \ |
| 589 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ |
| 590 $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ |
| 591 done |
| 592 |
| 593 uninstall-pkgconfigDATA: |
| 594 @$(NORMAL_UNINSTALL) |
| 595 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ |
| 596 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| 597 dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir) |
| 598 |
| 599 # This directory's subdirectories are mostly independent; you can cd |
| 600 # into them and run 'make' without going through this Makefile. |
| 601 # To change the values of 'make' variables: instead of editing Makefiles, |
| 602 # (1) if the variable is set in 'config.status', edit 'config.status' |
| 603 # (which will cause the Makefiles to be regenerated when you run 'make'); |
| 604 # (2) otherwise, pass the desired values on the 'make' command line. |
| 605 $(am__recursive_targets): |
| 606 @fail=; \ |
| 607 if $(am__make_keepgoing); then \ |
| 608 failcom='fail=yes'; \ |
| 609 else \ |
| 610 failcom='exit 1'; \ |
| 611 fi; \ |
| 612 dot_seen=no; \ |
| 613 target=`echo $@ | sed s/-recursive//`; \ |
| 614 case "$@" in \ |
| 615 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
| 616 *) list='$(SUBDIRS)' ;; \ |
| 617 esac; \ |
| 618 for subdir in $$list; do \ |
| 619 echo "Making $$target in $$subdir"; \ |
| 620 if test "$$subdir" = "."; then \ |
| 621 dot_seen=yes; \ |
| 622 local_target="$$target-am"; \ |
| 623 else \ |
| 624 local_target="$$target"; \ |
| 625 fi; \ |
| 626 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| 627 || eval $$failcom; \ |
| 628 done; \ |
| 629 if test "$$dot_seen" = "no"; then \ |
| 630 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| 631 fi; test -z "$$fail" |
| 632 |
| 633 ID: $(am__tagged_files) |
| 634 $(am__define_uniq_tagged_files); mkid -fID $$unique |
| 635 tags: tags-recursive |
| 636 TAGS: tags |
| 637 |
| 638 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) |
| 639 set x; \ |
| 640 here=`pwd`; \ |
| 641 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ |
| 642 include_option=--etags-include; \ |
| 643 empty_fix=.; \ |
| 644 else \ |
| 645 include_option=--include; \ |
| 646 empty_fix=; \ |
| 647 fi; \ |
| 648 list='$(SUBDIRS)'; for subdir in $$list; do \ |
| 649 if test "$$subdir" = .; then :; else \ |
| 650 test ! -f $$subdir/TAGS || \ |
| 651 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ |
| 652 fi; \ |
| 653 done; \ |
| 654 $(am__define_uniq_tagged_files); \ |
| 655 shift; \ |
| 656 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ |
| 657 test -n "$$unique" || unique=$$empty_fix; \ |
| 658 if test $$# -gt 0; then \ |
| 659 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| 660 "$$@" $$unique; \ |
| 661 else \ |
| 662 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| 663 $$unique; \ |
| 664 fi; \ |
| 665 fi |
| 666 ctags: ctags-recursive |
| 667 |
| 668 CTAGS: ctags |
| 669 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) |
| 670 $(am__define_uniq_tagged_files); \ |
| 671 test -z "$(CTAGS_ARGS)$$unique" \ |
| 672 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| 673 $$unique |
| 674 |
| 675 GTAGS: |
| 676 here=`$(am__cd) $(top_builddir) && pwd` \ |
| 677 && $(am__cd) $(top_srcdir) \ |
| 678 && gtags -i $(GTAGS_ARGS) "$$here" |
| 679 cscope: cscope.files |
| 680 test ! -s cscope.files \ |
| 681 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(
CSCOPE_ARGS) |
| 682 clean-cscope: |
| 683 -rm -f cscope.files |
| 684 cscope.files: clean-cscope cscopelist |
| 685 cscopelist: cscopelist-recursive |
| 686 |
| 687 cscopelist-am: $(am__tagged_files) |
| 688 list='$(am__tagged_files)'; \ |
| 689 case "$(srcdir)" in \ |
| 690 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ |
| 691 *) sdir=$(subdir)/$(srcdir) ;; \ |
| 692 esac; \ |
| 693 for i in $$list; do \ |
| 694 if test -f "$$i"; then \ |
| 695 echo "$(subdir)/$$i"; \ |
| 696 else \ |
| 697 echo "$$sdir/$$i"; \ |
| 698 fi; \ |
| 699 done >> $(top_builddir)/cscope.files |
| 700 |
| 701 distclean-tags: |
| 702 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| 703 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files |
| 704 |
| 705 distdir: $(DISTFILES) |
| 706 $(am__remove_distdir) |
| 707 test -d "$(distdir)" || mkdir "$(distdir)" |
| 708 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| 709 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| 710 list='$(DISTFILES)'; \ |
| 711 dist_files=`for file in $$list; do echo $$file; done | \ |
| 712 sed -e "s|^$$srcdirstrip/||;t" \ |
| 713 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
| 714 case $$dist_files in \ |
| 715 */*) $(MKDIR_P) `echo "$$dist_files" | \ |
| 716 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
| 717 sort -u` ;; \ |
| 718 esac; \ |
| 719 for file in $$dist_files; do \ |
| 720 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| 721 if test -d $$d/$$file; then \ |
| 722 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| 723 if test -d "$(distdir)/$$file"; then \ |
| 724 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {}
\;; \ |
| 725 fi; \ |
| 726 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| 727 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ |
| 728 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {}
\;; \ |
| 729 fi; \ |
| 730 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ |
| 731 else \ |
| 732 test -f "$(distdir)/$$file" \ |
| 733 || cp -p $$d/$$file "$(distdir)/$$file" \ |
| 734 || exit 1; \ |
| 735 fi; \ |
| 736 done |
| 737 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ |
| 738 if test "$$subdir" = .; then :; else \ |
| 739 $(am__make_dryrun) \ |
| 740 || test -d "$(distdir)/$$subdir" \ |
| 741 || $(MKDIR_P) "$(distdir)/$$subdir" \ |
| 742 || exit 1; \ |
| 743 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ |
| 744 $(am__relativize); \ |
| 745 new_distdir=$$reldir; \ |
| 746 dir1=$$subdir; dir2="$(top_distdir)"; \ |
| 747 $(am__relativize); \ |
| 748 new_top_distdir=$$reldir; \ |
| 749 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_to
p_distdir" distdir="$$new_distdir" \\"; \ |
| 750 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mod
e_fix=: distdir)"; \ |
| 751 ($(am__cd) $$subdir && \ |
| 752 $(MAKE) $(AM_MAKEFLAGS) \ |
| 753 top_distdir="$$new_top_distdir" \ |
| 754 distdir="$$new_distdir" \ |
| 755 am__remove_distdir=: \ |
| 756 am__skip_length_check=: \ |
| 757 am__skip_mode_fix=: \ |
| 758 distdir) \ |
| 759 || exit 1; \ |
| 760 fi; \ |
| 761 done |
| 762 $(MAKE) $(AM_MAKEFLAGS) \ |
| 763 top_distdir="$(top_distdir)" distdir="$(distdir)" \ |
| 764 dist-hook |
| 765 -test -n "$(am__skip_mode_fix)" \ |
| 766 || find "$(distdir)" -type d ! -perm -755 \ |
| 767 -exec chmod u+rwx,go+rx {} \; -o \ |
| 768 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ |
| 769 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ |
| 770 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ |
| 771 || chmod -R a+r "$(distdir)" |
| 772 dist-gzip: distdir |
| 773 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).t
ar.gz |
| 774 $(am__post_remove_distdir) |
| 775 |
| 776 dist-bzip2: distdir |
| 777 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir
).tar.bz2 |
| 778 $(am__post_remove_distdir) |
| 779 |
| 780 dist-lzip: distdir |
| 781 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).ta
r.lz |
| 782 $(am__post_remove_distdir) |
| 783 |
| 784 dist-xz: distdir |
| 785 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir)
.tar.xz |
| 786 $(am__post_remove_distdir) |
| 787 |
| 788 dist-tarZ: distdir |
| 789 @echo WARNING: "Support for shar distribution archives is" \ |
| 790 "deprecated." >&2 |
| 791 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 |
| 792 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z |
| 793 $(am__post_remove_distdir) |
| 794 |
| 795 dist-shar: distdir |
| 796 @echo WARNING: "Support for distribution archives compressed with" \ |
| 797 "legacy program 'compress' is deprecated." >&2 |
| 798 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 |
| 799 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz |
| 800 $(am__post_remove_distdir) |
| 801 |
| 802 dist-zip: distdir |
| 803 -rm -f $(distdir).zip |
| 804 zip -rq $(distdir).zip $(distdir) |
| 805 $(am__post_remove_distdir) |
| 806 |
| 807 dist dist-all: |
| 808 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' |
| 809 $(am__post_remove_distdir) |
| 810 |
| 811 # This target untars the dist file and tries a VPATH configuration. Then |
| 812 # it guarantees that the distribution is self-contained by making another |
| 813 # tarfile. |
| 814 distcheck: dist |
| 815 case '$(DIST_ARCHIVES)' in \ |
| 816 *.tar.gz*) \ |
| 817 GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ |
| 818 *.tar.bz2*) \ |
| 819 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ |
| 820 *.tar.lz*) \ |
| 821 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ |
| 822 *.tar.xz*) \ |
| 823 xz -dc $(distdir).tar.xz | $(am__untar) ;;\ |
| 824 *.tar.Z*) \ |
| 825 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ |
| 826 *.shar.gz*) \ |
| 827 GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ |
| 828 *.zip*) \ |
| 829 unzip $(distdir).zip ;;\ |
| 830 esac |
| 831 chmod -R a-w $(distdir) |
| 832 chmod u+w $(distdir) |
| 833 mkdir $(distdir)/_build $(distdir)/_inst |
| 834 chmod a-w $(distdir) |
| 835 test -d $(distdir)/_build || exit 0; \ |
| 836 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:
[\\/],/,'` \ |
| 837 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ |
| 838 && am__cwd=`pwd` \ |
| 839 && $(am__cd) $(distdir)/_build \ |
| 840 && ../configure \ |
| 841 $(AM_DISTCHECK_CONFIGURE_FLAGS) \ |
| 842 $(DISTCHECK_CONFIGURE_FLAGS) \ |
| 843 --srcdir=.. --prefix="$$dc_install_base" \ |
| 844 && $(MAKE) $(AM_MAKEFLAGS) \ |
| 845 && $(MAKE) $(AM_MAKEFLAGS) dvi \ |
| 846 && $(MAKE) $(AM_MAKEFLAGS) check \ |
| 847 && $(MAKE) $(AM_MAKEFLAGS) install \ |
| 848 && $(MAKE) $(AM_MAKEFLAGS) installcheck \ |
| 849 && $(MAKE) $(AM_MAKEFLAGS) uninstall \ |
| 850 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base"
\ |
| 851 distuninstallcheck \ |
| 852 && chmod -R a-w "$$dc_install_base" \ |
| 853 && ({ \ |
| 854 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ |
| 855 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ |
| 856 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ |
| 857 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ |
| 858 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ |
| 859 } || { rm -rf "$$dc_destdir"; exit 1; }) \ |
| 860 && rm -rf "$$dc_destdir" \ |
| 861 && $(MAKE) $(AM_MAKEFLAGS) dist \ |
| 862 && rm -rf $(DIST_ARCHIVES) \ |
| 863 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ |
| 864 && cd "$$am__cwd" \ |
| 865 || exit 1 |
| 866 $(am__post_remove_distdir) |
| 867 @(echo "$(distdir) archives ready for distribution: "; \ |
| 868 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ |
| 869 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' |
| 870 distuninstallcheck: |
| 871 @test -n '$(distuninstallcheck_dir)' || { \ |
| 872 echo 'ERROR: trying to run $@ with an empty' \ |
| 873 '$$(distuninstallcheck_dir)' >&2; \ |
| 874 exit 1; \ |
| 875 }; \ |
| 876 $(am__cd) '$(distuninstallcheck_dir)' || { \ |
| 877 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ |
| 878 exit 1; \ |
| 879 }; \ |
| 880 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ |
| 881 || { echo "ERROR: files left after uninstall:" ; \ |
| 882 if test -n "$(DESTDIR)"; then \ |
| 883 echo " (check DESTDIR support)"; \ |
| 884 fi ; \ |
| 885 $(distuninstallcheck_listfiles) ; \ |
| 886 exit 1; } >&2 |
| 887 distcleancheck: distclean |
| 888 @if test '$(srcdir)' = . ; then \ |
| 889 echo "ERROR: distcleancheck can only run from a VPATH build" ; \ |
| 890 exit 1 ; \ |
| 891 fi |
| 892 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ |
| 893 || { echo "ERROR: files left in build directory after distclean:" ; \ |
| 894 $(distcleancheck_listfiles) ; \ |
| 895 exit 1; } >&2 |
| 896 check-am: all-am |
| 897 $(MAKE) $(AM_MAKEFLAGS) check-local |
| 898 check: check-recursive |
| 899 all-am: Makefile $(SCRIPTS) $(DATA) config.h |
| 900 installdirs: installdirs-recursive |
| 901 installdirs-am: |
| 902 for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(confexecdir)" "$(DESTDIR)$
(m4datadir)" "$(DESTDIR)$(pkgconfigdir)"; do \ |
| 903 test -z "$$dir" || $(MKDIR_P) "$$dir"; \ |
| 904 done |
| 905 install: install-recursive |
| 906 install-exec: install-exec-recursive |
| 907 install-data: install-data-recursive |
| 908 uninstall: uninstall-recursive |
| 909 |
| 910 install-am: all-am |
| 911 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| 912 |
| 913 installcheck: installcheck-recursive |
| 914 install-strip: |
| 915 if test -z '$(STRIP)'; then \ |
| 916 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| 917 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s
\ |
| 918 install; \ |
| 919 else \ |
| 920 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| 921 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s
\ |
| 922 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ |
| 923 fi |
| 924 mostlyclean-generic: |
| 925 |
| 926 clean-generic: |
| 927 -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) |
| 928 |
| 929 distclean-generic: |
| 930 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| 931 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f
$(CONFIG_CLEAN_VPATH_FILES) |
| 932 |
| 933 maintainer-clean-generic: |
| 934 @echo "This command is intended for maintainers to use" |
| 935 @echo "it deletes files that may require special tools to rebuild." |
| 936 clean: clean-recursive |
| 937 |
| 938 clean-am: clean-generic clean-libtool mostlyclean-am |
| 939 |
| 940 distclean: distclean-recursive |
| 941 -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| 942 -rm -f Makefile |
| 943 distclean-am: clean-am distclean-generic distclean-hdr \ |
| 944 distclean-libtool distclean-tags |
| 945 |
| 946 dvi: dvi-recursive |
| 947 |
| 948 dvi-am: |
| 949 |
| 950 html: html-recursive |
| 951 |
| 952 html-am: |
| 953 |
| 954 info: info-recursive |
| 955 |
| 956 info-am: |
| 957 |
| 958 install-data-am: install-m4dataDATA install-pkgconfigDATA |
| 959 |
| 960 install-dvi: install-dvi-recursive |
| 961 |
| 962 install-dvi-am: |
| 963 |
| 964 install-exec-am: install-binSCRIPTS install-confexecDATA |
| 965 |
| 966 install-html: install-html-recursive |
| 967 |
| 968 install-html-am: |
| 969 |
| 970 install-info: install-info-recursive |
| 971 |
| 972 install-info-am: |
| 973 |
| 974 install-man: |
| 975 |
| 976 install-pdf: install-pdf-recursive |
| 977 |
| 978 install-pdf-am: |
| 979 |
| 980 install-ps: install-ps-recursive |
| 981 |
| 982 install-ps-am: |
| 983 |
| 984 installcheck-am: |
| 985 |
| 986 maintainer-clean: maintainer-clean-recursive |
| 987 -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| 988 -rm -rf $(top_srcdir)/autom4te.cache |
| 989 -rm -f Makefile |
| 990 maintainer-clean-am: distclean-am maintainer-clean-generic |
| 991 |
| 992 mostlyclean: mostlyclean-recursive |
| 993 |
| 994 mostlyclean-am: mostlyclean-generic mostlyclean-libtool |
| 995 |
| 996 pdf: pdf-recursive |
| 997 |
| 998 pdf-am: |
| 999 |
| 1000 ps: ps-recursive |
| 1001 |
| 1002 ps-am: |
| 1003 |
| 1004 uninstall-am: uninstall-binSCRIPTS uninstall-confexecDATA \ |
| 1005 uninstall-m4dataDATA uninstall-pkgconfigDATA |
| 1006 |
| 1007 .MAKE: $(am__recursive_targets) all check-am install-am install-strip |
| 1008 |
| 1009 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ |
| 1010 am--refresh check check-am check-local clean clean-cscope \ |
| 1011 clean-generic clean-libtool cscope cscopelist-am ctags \ |
| 1012 ctags-am dist dist-all dist-bzip2 dist-gzip dist-hook \ |
| 1013 dist-lzip dist-shar dist-tarZ dist-xz dist-zip distcheck \ |
| 1014 distclean distclean-generic distclean-hdr distclean-libtool \ |
| 1015 distclean-tags distcleancheck distdir distuninstallcheck dvi \ |
| 1016 dvi-am html html-am info info-am install install-am \ |
| 1017 install-binSCRIPTS install-confexecDATA install-data \ |
| 1018 install-data-am install-dvi install-dvi-am install-exec \ |
| 1019 install-exec-am install-html install-html-am install-info \ |
| 1020 install-info-am install-m4dataDATA install-man install-pdf \ |
| 1021 install-pdf-am install-pkgconfigDATA install-ps install-ps-am \ |
| 1022 install-strip installcheck installcheck-am installdirs \ |
| 1023 installdirs-am maintainer-clean maintainer-clean-generic \ |
| 1024 mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ |
| 1025 ps ps-am tags tags-am uninstall uninstall-am \ |
| 1026 uninstall-binSCRIPTS uninstall-confexecDATA \ |
| 1027 uninstall-m4dataDATA uninstall-pkgconfigDATA |
| 1028 |
| 1029 |
| 1030 dist-hook: cleanup libxslt.spec |
| 1031 touch $(distdir)/doc/*.xml |
| 1032 touch $(distdir)/doc/EXSLT/*.xml |
| 1033 touch $(distdir)/libxslt/*.syms |
| 1034 (cd $(srcdir) ; tar -cf - --exclude CVS --exclude .svn win32 vms example
s) | (cd $(distdir); tar xf -) |
| 1035 |
| 1036 xsltConf.sh: xsltConf.sh.in Makefile |
| 1037 sed -e 's?\@XSLT_LIBDIR\@?$(XSLT_LIBDIR)?g' \ |
| 1038 -e 's?\@XSLT_INCLUDEDIR\@?$(XSLT_INCLUDEDIR)?g' \ |
| 1039 -e 's?\@VERSION\@?$(VERSION)?g' \ |
| 1040 -e 's?\@XSLT_LIBS\@?$(XSLT_LIBS) $(EXTRA_LIBS)?g' \ |
| 1041 < $(srcdir)/xsltConf.sh.in > xsltConf.tmp \ |
| 1042 && mv xsltConf.tmp xsltConf.sh |
| 1043 |
| 1044 check-local: tests |
| 1045 |
| 1046 dummy: |
| 1047 |
| 1048 tests: dummy |
| 1049 @echo '## Running the regression test suite' |
| 1050 @(cd tests ; $(MAKE) tests) |
| 1051 @(cd xsltproc ; $(MAKE) tests) |
| 1052 @(if [ "$(PYTHON_SUBDIR)" != "" ] ; then cd python ; $(MAKE) tests ; fi) |
| 1053 |
| 1054 valgrind: |
| 1055 @echo '## Running the regression tests under Valgrind' |
| 1056 @echo '## Go get a cup of coffee it is gonna take a while ...' |
| 1057 @(cd tests ; $(MAKE) CHECKER='valgrind -q' tests) |
| 1058 @(cd xsltproc ; $(MAKE) CHECKER='valgrind -q' tests) |
| 1059 |
| 1060 cleanup: |
| 1061 -@(find . -name .\#\* -exec rm {} \;) |
| 1062 |
| 1063 cleantar: |
| 1064 @(rm -f libxslt*.tar.gz) |
| 1065 |
| 1066 rpm: cleantar |
| 1067 @(unset CDPATH ; $(MAKE) dist && rpmbuild -ta $(distdir).tar.gz) |
| 1068 |
| 1069 # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| 1070 # Otherwise a system limit (for SysV at least) may be exceeded. |
| 1071 .NOEXPORT: |
OLD | NEW |