Remove telemetry/third_party/gsutilz

tools/telemetry/third_party/gsutilz/gslib/addlhelp/creds.py

Index: tools/telemetry/third_party/gsutilz/gslib/addlhelp/creds.py
diff --git a/tools/telemetry/third_party/gsutilz/gslib/addlhelp/creds.py b/tools/telemetry/third_party/gsutilz/gslib/addlhelp/creds.py
deleted file mode 100644
index 497984aac2ba0734b327493225b84e76e507c8a1..0000000000000000000000000000000000000000
--- a/tools/telemetry/third_party/gsutilz/gslib/addlhelp/creds.py
+++ /dev/null
@@ -1,162 +0,0 @@
-# -*- coding: utf-8 -*-
-# Copyright 2013 Google Inc. All Rights Reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-"""Additional help about types of credentials and authentication."""
-
-from __future__ import absolute_import
-
-from gslib.help_provider import HelpProvider
-
-_DETAILED_HELP_TEXT = ("""
-<B>OVERVIEW</B>
-  gsutil currently supports several types of credentials/authentication, as
-  well as the ability to access public data anonymously (see "gsutil help anon"
-  for more on anonymous access). Each of these type of credentials is discussed
-  in more detail below, along with information about configuring and using
-  credentials via either the Cloud SDK or standalone installations of gsutil.
-
-
-<B>Configuring/Using Credentials via Cloud SDK Distribution of gsutil</B>
-  When gsutil is installed/used via the Cloud SDK ("gcloud"), credentials are
-  stored by Cloud SDK in a non-user-editable file located under
-  ~/.config/gcloud (any manipulation of credentials should be done via the
-  gcloud auth command). If you need to set up multiple credentials (e.g., one
-  for an individual user account and a second for a service account), the
-  gcloud auth command manages the credentials for you, and you switch between
-  credentials using the gcloud auth command as well (for more details see
-  https://developers.google.com/cloud/sdk/gcloud/#gcloud.auth).
-
-  Once credentials have been configured via gcloud auth, those credentials will
-  be used regardless of whether the user has any boto configuration files (which
-  are located at ~/.boto unless a different path is specified in the BOTO_CONFIG
-  environment variable). However, gsutil will still look for credentials in the
-  boto config file if a type of credential is needed that's not stored in the
-  gcloud credential store (e.g., an HMAC credential for an S3 account).
-
-
-<B>Configuring/Using Credentials via Standalone gsutil Distribution</B>
-  If you installed a standalone distribution of gsutil (downloaded from
-  https://pub.storage.googleapis.com/gsutil.tar.gz,
-  https://pub.storage.googleapis.com/gsutil.zip, or PyPi), credentials are
-  configured using the gsutil config command, and are stored in the
-  user-editable boto config file (located at ~/.boto unless a different path is
-  specified in the BOTO_CONFIG environment). In this case if you want to set up
-  multiple credentials (e.g., one for an individual user account and a second
-  for a service account), you run gsutil config once for each credential, and
-  save each of the generated boto config files (e.g., renaming one to
-  ~/.boto_user_account and the second to ~/.boto_service_account), and you
-  switch between the credentials using the BOTO_CONFIG environment variable
-  (e.g., by running BOTO_CONFIG=~/.boto_user_account gsutil ls).
-
-  Note that when using the standalone version of gsutil with the JSON API you
-  can configure at most one of the following types of GCS credentials in a
-  single boto config file: OAuth2 User Account, OAuth2 Service Account. In
-  addition to these, you may also have S3 HMAC credentials (necessary for using
-  s3:// URLs) and GCE Internal Service Account credentials. GCE Internal Service
-  Account credentials are used only when OAuth2 credentials are not present.
-
-
-<B>SUPPORTED CREDENTIAL TYPES</B>
-  gsutil supports several types of credentials (the specific subset depends on
-  which distribution of gsutil you are using; see above discussion).
-
-  OAuth2 User Account:
-    This is the preferred type of credentials for authenticating requests on
-    behalf of a specific user (which is probably the most common use of gsutil).
-    This is the default type of credential that will be created when you run
-    "gsutil config".
-    For more details about OAuth2 authentication, see:
-    https://developers.google.com/accounts/docs/OAuth2#scenarios
-
-  HMAC:
-    This type of credential can be used by programs that are implemented using
-    HMAC authentication, which is an authentication mechanism supported by
-    certain other cloud storage service providers. This type of credential can
-    also be used for interactive use when moving data to/from service providers
-    that support HMAC credentials. This is the type of credential that will be
-    created when you run "gsutil config -a".
-
-    Note that it's possible to set up HMAC credentials for both Google Cloud
-    Storage and another service provider; or to set up OAuth2 user account
-    credentials for Google Cloud Storage and HMAC credentials for another
-    service provider. To do so, after you run the gsutil config command, you
-    can edit the generated ~/.boto config file and look for comments for where
-    other credentials can be added.
-
-    For more details about HMAC authentication, see:
-      https://developers.google.com/storage/docs/reference/v1/getting-startedv1#keys
-
-  OAuth2 Service Account:
-    This is the preferred type of credential to use when authenticating on
-    behalf of a service or application (as opposed to a user). For example, if
-    you will run gsutil out of a nightly cron job to upload/download data,
-    using a service account allows the cron job not to depend on credentials of
-    an individual employee at your company. This is the type of credential that
-    will be configured when you run "gsutil config -e".
-
-    It is important to note that a service account is considered an Editor by
-    default for the purposes of API access, rather than an Owner. In particular,
-    the fact that Editors have OWNER access in the default object and
-    bucket ACLs, but the canned ACL options remove OWNER access from
-    Editors, can lead to unexpected results. The solution to this problem is to
-    add the email address for your service account as a project editor. To find
-    the email address, visit the
-    `Google Developers Console <https://cloud.google.com/console#/project>`_,
-    click on the project you're using, click "APIs & auth", and click
-    "Credentials".
-
-    To create a service account, visit the Google Developers Console and then:
-
-       - Click "APIs & auth" in the left sidebar.
-
-       - Click "Credentials".
-
-       - Click "Create New Client ID".
-
-       - Select "Service Account" as your application type.
-
-       - Save the JSON private key or the .p12 private key and password
-         provided.
-
-    For further information about account roles, see:
-      https://developers.google.com/console/help/#DifferentRoles
-
-    For more details about OAuth2 service accounts, see:
-      https://developers.google.com/accounts/docs/OAuth2ServiceAccount
-
-  GCE Internal Service Account:
-    This is the type of service account used for accounts hosted by App Engine
-    or GCE. Such credentials are created automatically for you on GCE when you
-    run the gcutil addinstance command with the --service_account flag.
-
-    For more details about GCE service accounts, see:
-      https://developers.google.com/compute/docs/authentication;
-
-    For more details about App Engine service accounts, see:
-      https://developers.google.com/appengine/docs/python/appidentity/overview
-""")
-
-
-class CommandOptions(HelpProvider):
-  """Additional help about types of credentials and authentication."""
-
-  # Help specification. See help_provider.py for documentation.
-  help_spec = HelpProvider.HelpSpec(
-      help_name='creds',
-      help_name_aliases=['credentials', 'authentication', 'auth', 'gcloud'],
-      help_type='additional_help',
-      help_one_line_summary='Credential Types Supporting Various Use Cases',
-      help_text=_DETAILED_HELP_TEXT,
-      subcommand_help_text={},
-  )