Revert "Add gsutil 4.13 to telemetry/third_party"

tools/telemetry/third_party/gsutil/gslib/addlhelp/wildcards.py

Index: tools/telemetry/third_party/gsutil/gslib/addlhelp/wildcards.py
diff --git a/tools/telemetry/third_party/gsutil/gslib/addlhelp/wildcards.py b/tools/telemetry/third_party/gsutil/gslib/addlhelp/wildcards.py
deleted file mode 100644
index ae2e74d1589304b85c98814b6b14a4b5ab227d61..0000000000000000000000000000000000000000
--- a/tools/telemetry/third_party/gsutil/gslib/addlhelp/wildcards.py
+++ /dev/null
@@ -1,178 +0,0 @@
-# -*- coding: utf-8 -*-
-# Copyright 2012 Google Inc. All Rights Reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-"""Additional help about wildcards."""
-
-from __future__ import absolute_import
-
-from gslib.help_provider import HelpProvider
-
-_DETAILED_HELP_TEXT = ("""
-<B>DESCRIPTION</B>
-  gsutil supports URI wildcards. For example, the command:
-
-    gsutil cp gs://bucket/data/abc* .
-
-  will copy all objects that start with gs://bucket/data/abc followed by any
-  number of characters within that subdirectory.
-
-
-<B>DIRECTORY BY DIRECTORY VS RECURSIVE WILDCARDS</B>
-  The "*" wildcard only matches up to the end of a path within
-  a subdirectory. For example, if bucket contains objects
-  named gs://bucket/data/abcd, gs://bucket/data/abcdef,
-  and gs://bucket/data/abcxyx, as well as an object in a sub-directory
-  (gs://bucket/data/abc/def) the above gsutil cp command would match the
-  first 3 object names but not the last one.
-
-  If you want matches to span directory boundaries, use a '**' wildcard:
-
-    gsutil cp gs://bucket/data/abc** .
-
-  will match all four objects above.
-
-  Note that gsutil supports the same wildcards for both objects and file names.
-  Thus, for example:
-
-    gsutil cp data/abc* gs://bucket
-
-  will match all names in the local file system. Most command shells also
-  support wildcarding, so if you run the above command probably your shell
-  is expanding the matches before running gsutil. However, most shells do not
-  support recursive wildcards ('**'), and you can cause gsutil's wildcarding
-  support to work for such shells by single-quoting the arguments so they
-  don't get interpreted by the shell before being passed to gsutil:
-
-    gsutil cp 'data/abc**' gs://bucket
-
-
-<B>BUCKET WILDCARDS</B>
-  You can specify wildcards for bucket names within a single project. For
-  example:
-
-    gsutil ls gs://data*.example.com
-
-  will list the contents of all buckets whose name starts with "data" and
-  ends with ".example.com" in the default project. The -p option can be used
-  to specify a project other than the default.  For example:
-
-    gsutil ls -p other-project gs://data*.example.com
-
-  You can also combine bucket and object name wildcards. For example this
-  command will remove all ".txt" files in any of your Google Cloud Storage
-  buckets in the default project:
-
-    gsutil rm gs://*/**.txt
-
-
-<B>OTHER WILDCARD CHARACTERS</B>
-  In addition to '*', you can use these wildcards:
-
-  ?
-    Matches a single character. For example "gs://bucket/??.txt"
-    only matches objects with two characters followed by .txt.
-
-  [chars]
-    Match any of the specified characters. For example
-    "gs://bucket/[aeiou].txt" matches objects that contain a single vowel
-    character followed by .txt
-
-  [char range]
-    Match any of the range of characters. For example
-    "gs://bucket/[a-m].txt" matches objects that contain letters
-    a, b, c, ... or m, and end with .txt.
-
-  You can combine wildcards to provide more powerful matches, for example:
-
-    gs://bucket/[a-m]??.j*g
-
-
-<B>EFFICIENCY CONSIDERATION: USING WILDCARDS OVER MANY OBJECTS</B>
-  It is more efficient, faster, and less network traffic-intensive
-  to use wildcards that have a non-wildcard object-name prefix, like:
-
-    gs://bucket/abc*.txt
-
-  than it is to use wildcards as the first part of the object name, like:
-
-    gs://bucket/*abc.txt
-
-  This is because the request for "gs://bucket/abc*.txt" asks the server to send
-  back the subset of results whose object name start with "abc" at the bucket
-  root, and then gsutil filters the result list for objects whose name ends with
-  ".txt".  In contrast, "gs://bucket/*abc.txt" asks the server for the complete
-  list of objects in the bucket root, and then filters for those objects whose
-  name ends with "abc.txt". This efficiency consideration becomes increasingly
-  noticeable when you use buckets containing thousands or more objects. It is
-  sometimes possible to set up the names of your objects to fit with expected
-  wildcard matching patterns, to take advantage of the efficiency of doing
-  server-side prefix requests. See, for example "gsutil help prod" for a
-  concrete use case example.
-
-
-<B>EFFICIENCY CONSIDERATION: USING MID-PATH WILDCARDS</B>
-  Suppose you have a bucket with these objects:
-
-    gs://bucket/obj1
-    gs://bucket/obj2
-    gs://bucket/obj3
-    gs://bucket/obj4
-    gs://bucket/dir1/obj5
-    gs://bucket/dir2/obj6
-
-  If you run the command:
-
-    gsutil ls gs://bucket/*/obj5
-
-  gsutil will perform a /-delimited top-level bucket listing and then one bucket
-  listing for each subdirectory, for a total of 3 bucket listings:
-
-    GET /bucket/?delimiter=/
-    GET /bucket/?prefix=dir1/obj5&delimiter=/
-    GET /bucket/?prefix=dir2/obj5&delimiter=/
-
-  The more bucket listings your wildcard requires, the slower and more expensive
-  it will be. The number of bucket listings required grows as:
-
-  - the number of wildcard components (e.g., "gs://bucket/a??b/c*/*/d"
-    has 3 wildcard components);
-  - the number of subdirectories that match each component; and
-  - the number of results (pagination is implemented using one GET
-    request per 1000 results, specifying markers for each).
-
-  If you want to use a mid-path wildcard, you might try instead using a
-  recursive wildcard, for example:
-
-    gsutil ls gs://bucket/**/obj5
-
-  This will match more objects than "gs://bucket/*/obj5" (since it spans
-  directories), but is implemented using a delimiter-less bucket listing
-  request (which means fewer bucket requests, though it will list the entire
-  bucket and filter locally, so that could require a non-trivial amount of
-  network traffic).
-""")
-
-
-class CommandOptions(HelpProvider):
-  """Additional help about wildcards."""
-
-  # Help specification. See help_provider.py for documentation.
-  help_spec = HelpProvider.HelpSpec(
-      help_name='wildcards',
-      help_name_aliases=['wildcard', '*', '**'],
-      help_type='additional_help',
-      help_one_line_summary='Wildcard Names',
-      help_text=_DETAILED_HELP_TEXT,
-      subcommand_help_text={},
-  )