Remove ChromeOS specific configs from the U-Boot repository.

include/configs/chromeos/st15/common.h

Index: include/configs/chromeos/st15/common.h
diff --git a/include/configs/chromeos/st15/common.h b/include/configs/chromeos/st15/common.h
deleted file mode 100644
index b2b9b1a6f4dc1e7a5376e10173dda04c74dbffac..0000000000000000000000000000000000000000
--- a/include/configs/chromeos/st15/common.h
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
- *
- * (C) Copyright 2002-2005
- * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- * Gary Jennejohn <gj@denx.de>
- *
- * Configuation settings for the st1q board, based on the Qualcomm
- * QSD8x50 surf board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIGS_CHROMEOS_ST15_COMMON_H
-#define __CONFIGS_CHROMEOS_ST15_COMMON_H
-
-#define CPU_IS_QSD8x50A
-
-#include <asm/arch/QSD8x50A_reg.h>
-#include <asm-armv7Scorpion/armv7Scorpion.h>
-#include <config.h>
-
-#define CONFIG_CHROMEOS_HWID	"ARM ST15 TEST 7712"
-
-#define IO_READ32(addr)        (*((volatile unsigned int *) (addr)))
-#define IO_WRITE32(addr, val)  (*((volatile unsigned int *) (addr)) = ((unsigned int) (val)))
-#define IO_READ16(addr)        (*((volatile unsigned short *) (addr)))
-#define IO_WRITE16(addr, val)  (*((volatile unsigned short *) (addr)) = ((unsigned short) (val)))
-#define IO_READ8(addr)         (*((volatile char *) (addr)))
-#define IO_WRITE8(addr, val)   (*((volatile unsigned char *) (addr)) = ((unsigned char) (val)))
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_STACK_BASE
-
-#define CONFIG_ARCH_CPU_INIT
-
-/*
- * Machine ID for ST1.5
- */
-#define LINUX_MACH_TYPE	2627
-
-#define CONFIG_SYS_HZ	(32768)  /* GPT Timer frequency */
-#define CONFIG_TCXO_HZ	19200000 /* TCX0 frequency */
-
-#undef  CONFIG_SHOW_BOOT_PROGRESS
-
-#define CONFIG_CMDLINE_TAG	   	  /* enable passing of ATAGs  */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-/*
- * Enable to pass framebuffer info to kernel
- * but after implementing calc_fbsize() in lcdc.c
- */
-#define CONFIG_VIDEOFLB_ATAG_NOT_SUPPORTED
-
-#define ATAG_CORE_FLAGS 	0x00000001
-#define ATAG_PAGE_SIZE	  	0x00001000
-#define ATAG_CORE_RDEV		0x000000FF
-
-#define CONFIG_MISC_INIT_R	1	/* call misc_init_r during start up */
-
-/* Warm boot related constants */
-#define CONFIG_WARMBOOT_TRUE			0xBAC4F00D
-#define CONFIG_WARMBOOT_FALSE   		0x15FA15E2
-
-/*
- * Address where ATAGs are stored and where bootwedge used to be.
- * 2 words at ATAGs are overwritten by power collapse routine
- * in the kernel to cause a jump back to the
- * power collapse exit routine in the kernel.
- * These are restored back to their original values
- * after successful power collapse .
- */
-#define CONFIG_WARMBOOT_POWER_COLLAPSE_EXIT_ADDRESS 	PHYS_SDRAM_1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128*1024)
-
-/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE	128
-
-/*
- * Stack space needed =
- * Stack + Global Data + 3 words abort stack
- * This is checked by linker script to define stack section
- */
-#define CONFIG_SYS_MAX_STACK_SPACE (CONFIG_STACKSIZE + \
-		                    CONFIG_SYS_GBL_DATA_SIZE + 12)
-
-/*
- * Serial port Configuration
- */
-#undef  CONFIG_SILENT_CONSOLE
-#define CFG_QC_SERIAL
-#define CONFIG_CONS_INDEX		0
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-#define CONFIG_BOOTP_MASK		CONFIG_BOOTP_DEFAULT
-
-#define CONFIG_CMD_SOURCE
-
-#define CONFIG_BOOTDELAY		0
-
-#define CONFIG_BOOTARGS			"quiet root=/dev/mmcblk0p3 rootwait noresume noswap ro loglevel=1 pmem_kernel_ebi1_size=96M pmem_adsp_size=34200K"
-#define CONFIG_BOOTCOMMAND                                              \
-        "if mmcinfo 0; then "                                           \
-           "if ext2load mmc 0:3 0x00000000 boot/boot_script.uimg; then "\
-              "source 0x00000000; "                                     \
-           "elif ext2load mmc 0:3 0x00007fc0 boot/vmlinux.uimg; then "  \
-                "bootm 0x00007fc0; "                                    \
-           "fi; "                                                       \
-        "elif mmcinfo 1; then "                                         \
-           "if ext2load mmc 1:3 0x00000000 boot/boot_script.uimg; then "\
-              "source 0x00000000; "                                     \
-           "elif ext2load mmc 1:3 0x00007fc0 boot/vmlinux.uimg; then "  \
-              "bootm 0x00007fc0; "                                      \
-           "fi; "                                                       \
-        "fi;"
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
-#define CONFIG_SYS_PROMPT	"ChromeOS> "
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size  */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args   */
-#define CONFIG_SYS_BARGSIZE	2048 /* Boot Argument Buffer Size    */
-
-#define CONFIG_SYS_LOAD_ADDR	(PHYS_SDRAM_1 + 0x7FC0) 	/* default load address in EBI1 SDRAM */
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-#endif
-
-/*
- * SDRAM is split into 2 regions to accommodate ADSP as a memory hole.
- * Memory available for kernel: 224 + 768 = 992MB.
- */
-#define CONFIG_NR_DRAM_BANKS	2
-#define PHYS_SDRAM_1		0x00000000	    /* EBI1 start */
-#define PHYS_SDRAM_1_SIZE	0x0E000000	    /* 256 - 32(adsp) = 224MB (0x0E000000)*/
-#define PHYS_SDRAM_2		0x10000000	    /* EBI1, AFTER ADSP */
-#define PHYS_SDRAM_2_SIZE	0x30000000	    /* 768MB */
-
-#define CONFIG_ARM_DCC
-#define CONFIG_ARM_DCC_MULTI
-#define CONFIG_CPU_V7
-
-/* Console setup */
-#if defined(CONFIG_SERIAL_CONSOLE)
- #define CONFIG_STDOUT "serial"
- #define CONFIG_STDERR "serial"
- #define CONFIG_STDIN  "serial"
-#elif defined(CONFIG_DCC_CONSOLE)
- #define CONFIG_STDOUT "dcc"
- #define CONFIG_STDERR "dcc"
- #define CONFIG_STDIN  "dcc"
-#else /* default */
- #define CONFIG_STDOUT "lcd"
- #define CONFIG_STDERR "lcd"
- #define CONFIG_STDIN  "dcc"
-#endif
-
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-
-/*-----------------------------------------------------------------------
- * Shared Memory Location -
- */
-#define SMEM_START  0xE0100000
-#define SMEM_SIZE   0x00100000
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map -
- * U-Boot code, data, stack, etc. reside in SMI SDRAM 0x00000000-0x000FFFFF.
- * There are similar parameters in the u-boot.lds linker script which also
- * need to be updated.
- */
-#define UBOOT_SDRAM_BASE         0xE0000000      /* SMI */
-#define UBOOT_SDRAM_SIZE         0x00100000
-
-/* Memory Test */
-#define CONFIG_SYS_MEMTEST_START       PHYS_SDRAM_1
-#define CONFIG_SYS_MEMTEST_END         (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)
-
-/* Environment */
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_SIZE         0x2000
-
-/* Boot parameter address - offset of 0x100 from base of first sdram region */
-#define CFG_QC_BOOT_PARAM_ADDR    (PHYS_SDRAM_1 + 0x100)
-
-/*-----------------------------------------------------------------------
- * The qc_serial driver uses the register names below. Set UART_BASE
- * for the desired UART.
- */
-#define UART_BASE     UART3_BASE
-
-/* MMC interface */
-#define CONFIG_GENERIC_MMC
-#define CONFIG_GENERIC_MMC_MULTI_BLOCK_READ
-#define CONFIG_QSD_SDCC
-
-
-#ifndef CONFIG_GENERIC_MMC
-/* This section regarding legacy mmc will be removed once the new
- * mmc framework has been verified/tested sufficiently. If there are
- * any major issues, you could go back to the legacy mmc by undefining
- * the generic mmc code.
- */
-
-/*-----------------------------------------------------------------------
- * Choose the SD controller to use. SDC1, 2, 3, or 4.
- */
-#define SDC_INSTANCE  1
-#define USE_DM
-#define USE_HIGH_SPEED_MODE
-#define USE_4_BIT_BUS_MODE
-#define CONFIG_SYS_MMC_BASE             0xF0000000    // not used, but defined to prevent compile error
-#define PROC_COMM_VREG_SDC  PM_VREG_WLAN_ID
-#endif
-
-/*-----------------------------------------------------------------------
- * NAND configuration
- */
-#define CONFIG_USE_ACCELERATED_PAGE_READ
-
-#define CONFIG_SYS_MAX_NAND_DEVICE  1
-#define CONFIG_SYS_NAND_BASE        0xF0000000  // not used, but defined to prevent compile error
-
-// NAND device specific register values for the NAND controller
-// These values are for the Samsung MFG=0xEC DEV=0xAA device (x8, 1.65~1.95V, 2K page)
-// NAND_DEVn_CFG0 and 1 registers. These parameters are are used for page r/w
-#define CONFIG_QC_NAND_NAND_DEVn_CFG0_VAL    0xAAD400C0
-#define CONFIG_QC_NAND_NAND_DEVn_CFG1_VAL    0x0004745C
-
-// NAND_DEVn_CFG0 and 1 registers. These parameters are are used for READ ID command
-#define CONFIG_QC_NAND_NAND_DEVn_CFG0_RD_ID_VAL    0xA2D40000;
-#define CONFIG_QC_NAND_NAND_DEVn_CFG1_RD_ID_VAL    0x0005019C;
-
-//Decide whether to use proc comm to communicate with modem
-//This will eventually go away.
-#define USE_PROC_COMM
-#define PROC_COMM_MPP_FOR_USB_VBUS PM_MPP_16
-#undef  USE_PROC_COMM_USB_PHY_RESET /* proc_comm cmd to reset phy not working
-                                       rt now, but eventually it will*/
-
-#endif /* __CONFIGS_CHROMEOS_ST15_COMMON_H */