Add bignum fall-back when the fast dtoa doesn't succeed. This removes Gay's d...

src/bignum-dtoa.cc

Index: src/bignum-dtoa.cc
===================================================================
--- src/bignum-dtoa.cc	(revision 0)
+++ src/bignum-dtoa.cc	(revision 0)
@@ -0,0 +1,655 @@
+// Copyright 2010 the V8 project authors. All rights reserved.
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+//     * Redistributions of source code must retain the above copyright
+//       notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+//       copyright notice, this list of conditions and the following
+//       disclaimer in the documentation and/or other materials provided
+//       with the distribution.
+//     * Neither the name of Google Inc. nor the names of its
+//       contributors may be used to endorse or promote products derived
+//       from this software without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+#include <math.h>
+
+#include "v8.h"
+#include "bignum-dtoa.h"
+
+#include "bignum.h"
+#include "double.h"
+
+namespace v8 {
+namespace internal {
+
+static int NormalizedExponent(uint64_t significand, int exponent) {
+  ASSERT(significand != 0);
+  while ((significand & Double::kHiddenBit) == 0) {
+    significand = significand << 1;
+    exponent = exponent - 1;
+  }
+  return exponent;
+}
+
+
+// Forward declarations:
+// Returns an estimation of k such that 10^(k-1) <= v < 10^k.
+static int EstimatePower(int);
+// Computes v / 10^estimated_power exactly, as a ratio of two bignums, numerator
+// and denominator.
+static void InitialScaledStartValues(double v,
+                                     int estimated_power,
+                                     bool need_boundary_deltas,
+                                     Bignum* numerator,
+                                     Bignum* denominator,
+                                     Bignum* delta_minus,
+                                     Bignum* delta_plus);
+// Multiplies numerator/denominator so that its values lies in the range 1-10.
+// Returns decimal_point s.t.
+//  v = numerator'/denominator' * 10^(decimal_point-1)
+//     where numerator' and denominator' are the values of numerator and
+//     denominator after the call to this function.
+static void FixupMultiply10(int estimated_power, bool is_even,
+                            int* decimal_point,
+                            Bignum* numerator, Bignum* denominator,
+                            Bignum* delta_minus, Bignum* delta_plus);
+// Generates digits from the left to the right and stops when the generated
+// digits yield the shortest decimal representation of v.
+static void GenerateShortestDigits(Bignum* numerator, Bignum* denominator,
+                                   Bignum* delta_minus, Bignum* delta_plus,
+                                   bool is_even,
+                                   Vector<char> buffer, int* length);
+// Generates 'requested_digits' after the decimal point.
+static void BignumToFixed(int requested_digits, int* decimal_point,
+                          Bignum* numerator, Bignum* denominator,
+                          Vector<char>(buffer), int* length);
+// Generates 'count' digits of numerator/denominator.
+// Once 'count' digits have been produced rounds the result depending on the
+// remainder (remainders of exactly .5 round upwards). Might update the
+// decimal_point when rounding up (for example for 0.9999).
+static void GenerateCountedDigits(int count, int* decimal_point,
+                                  Bignum* numerator, Bignum* denominator,
+                                  Vector<char>(buffer), int* length);
+
+
+void BignumDtoa(double v, BignumDtoaMode mode, int requested_digits,
+                Vector<char> buffer, int* length, int* decimal_point) {
+  ASSERT(v > 0);
+  ASSERT(!Double(v).IsSpecial());
+  uint64_t significand = Double(v).Significand();
+  bool is_even = (significand & 1) == 0;
+  int exponent = Double(v).Exponent();
+  int normalized_exponent = NormalizedExponent(significand, exponent);
+  // estimated_power might be too low by 1.
+  int estimated_power = EstimatePower(normalized_exponent);
+
+  // Shortcut for Fixed.
+  // The requested digits correspond to the digits after the point. If the
+  // number is much too small, then there is no need in trying to get any
+  // digits.
+  if (mode == BIGNUM_DTOA_FIXED && -estimated_power - 1 > requested_digits) {
+    buffer[0] = '\0';
+    *length = 0;
+    // Set decimal-point to -requested_digits. This is what Gay does.
+    // Note that it should not have any effect anyways since the string is
+    // empty.
+    *decimal_point = -requested_digits;
+    return;
+  }
+
+  Bignum numerator;
+  Bignum denominator;
+  Bignum delta_minus;
+  Bignum delta_plus;
+  // Make sure the bignum can grow large enough. The smallest double equals
+  // 4e-324. In this case the denominator needs fewer than 324*4 binary digits.
+  // The maximum double is 1.7976931348623157e308 which needs fewer than
+  // 308*4 binary digits.
+  ASSERT(Bignum::kMaxSignificantBits >= 324*4);
+  bool need_boundary_deltas = (mode == BIGNUM_DTOA_SHORTEST);
+  InitialScaledStartValues(v, estimated_power, need_boundary_deltas,
+                           &numerator, &denominator,
+                           &delta_minus, &delta_plus);
+  // We now have v = (numerator / denominator) * 10^estimated_power.
+  FixupMultiply10(estimated_power, is_even, decimal_point,
+                  &numerator, &denominator,
+                  &delta_minus, &delta_plus);
+  // We now have v = (numerator / denominator) * 10^(decimal_point-1), and
+  //  1 <= (numerator + delta_plus) / denominator < 10
+  switch (mode) {
+    case BIGNUM_DTOA_SHORTEST:
+      GenerateShortestDigits(&numerator, &denominator,
+                             &delta_minus, &delta_plus,
+                             is_even, buffer, length);
+      break;
+    case BIGNUM_DTOA_FIXED:
+      BignumToFixed(requested_digits, decimal_point,
+                    &numerator, &denominator,
+                    buffer, length);
+      break;
+    case BIGNUM_DTOA_PRECISION:
+      GenerateCountedDigits(requested_digits, decimal_point,
+                            &numerator, &denominator,
+                            buffer, length);
+      break;
+    default:
+      UNREACHABLE();
+  }
+  buffer[*length] = '\0';
+}
+
+
+// The procedure starts generating digits from the left to the right and stops
+// when the generated digits yield the shortest decimal representation of v. A
+// decimal representation of v is a number lying closer to v than to any other
+// double, so it converts to v when read.
+//
+// This is true if d, the decimal representation, is between m- and m+, the
+// upper and lower boundaries. d must be strictly between them if !is_even.
+//           m- := (numerator - delta_minus) / denominator
+//           m+ := (numerator + delta_plus) / denominator
+//
+// Precondition: 0 <= (numerator+delta_plus) / denominator < 10.
+//   If 1 <= (numerator+delta_plus) / denominator < 10 then no leading 0 digit
+//   will be produced. This should be the standard precondition.
+static void GenerateShortestDigits(Bignum* numerator, Bignum* denominator,
+                                   Bignum* delta_minus, Bignum* delta_plus,
+                                   bool is_even,
+                                   Vector<char> buffer, int* length) {
+  // Small optimization: if delta_minus and delta_plus are the same just reuse
+  // one of the two bignums.
+  if (Bignum::Equal(*delta_minus, *delta_plus)) {
+    delta_plus = delta_minus;
+  }
+  *length = 0;
+  while (true) {
+    uint16_t digit;
+    digit = numerator->DivideModuloIntBignum(*denominator);
+    ASSERT(digit <= 9);  // digit is a uint16_t and therefore always positive.
+    // digit = numerator / denominator (integer division).
+    // numerator = numerator % denominator.
+    buffer[(*length)++] = digit + '0';
+
+    // Can we stop already?
+    // If the remainder of the division is less than the distance to the lower
+    // boundary we can stop. In this case we simply round down (discarding the
+    // remainder).
+    // Similarly we test if we can round up (using the upper boundary).
+    bool in_delta_room_minus;
+    bool in_delta_room_plus;
+    if (is_even) {
+      in_delta_room_minus = Bignum::LessEqual(*numerator, *delta_minus);
+    } else {
+      in_delta_room_minus = Bignum::Less(*numerator, *delta_minus);
+    }
+    if (is_even) {
+      in_delta_room_plus =
+          Bignum::PlusCompare(*numerator, *delta_plus, *denominator) >= 0;
+    } else {
+      in_delta_room_plus =
+          Bignum::PlusCompare(*numerator, *delta_plus, *denominator) > 0;
+    }
+    if (!in_delta_room_minus && !in_delta_room_plus) {
+      // Prepare for next iteration.
+      numerator->Times10();
+      delta_minus->Times10();
+      // We optimized delta_plus to be equal to delta_minus (if they share the
+      // same value). So don't multiply delta_plus if they point to the same
+      // object.
+      if (delta_minus != delta_plus) {
+        delta_plus->Times10();
+      }
+    } else if (in_delta_room_minus && in_delta_room_plus) {
+      // Let's see if 2*numerator < denominator.
+      // If yes, then the next digit would be < 5 and we can round down.
+      int compare = Bignum::PlusCompare(*numerator, *numerator, *denominator);
+      if (compare < 0) {
+        // Remaining digits are less than .5. -> Round down (== do nothing).
+      } else if (compare > 0) {
+        // Remaining digits are more than .5 of denominator. -> Round up.
+        // Note that the last digit could not be a '9' as otherwise the whole
+        // loop would have stopped earlier.
+        // We still have an assert here in case the preconditions were not
+        // satisfied.
+        ASSERT(buffer[(*length) - 1] != '9');
+        buffer[(*length) - 1]++;
+      } else {
+        // Halfway case.
+        // TODO(floitsch): need a way to solve half-way cases.
+        //   For now let's round towards even (since this is what Gay seems to
+        //   do).
+
+        if ((buffer[(*length) - 1] - '0') % 2 == 0) {
+          // Round down => Do nothing.
+        } else {
+          ASSERT(buffer[(*length) - 1] != '9');
+          buffer[(*length) - 1]++;
+        }
+      }
+      return;
+    } else if (in_delta_room_minus) {
+      // Round down (== do nothing).
+      return;
+    } else {  // in_delta_room_plus
+      // Round up.
+      // Note again that the last digit could not be '9' since this would have
+      // stopped the loop earlier.
+      // We still have an ASSERT here, in case the preconditions were not
+      // satisfied.
+      ASSERT(buffer[(*length) -1] != '9');
+      buffer[(*length) - 1]++;
+      return;
+    }
+  }
+}
+
+
+// Let v = numerator / denominator < 10.
+// Then we generate 'count' digits of d = x.xxxxx... (without the decimal point)
+// from left to right. Once 'count' digits have been produced we decide wether
+// to round up or down. Remainders of exactly .5 round upwards. Numbers such
+// as 9.999999 propagate a carry all the way, and change the
+// exponent (decimal_point), when rounding upwards.
+static void GenerateCountedDigits(int count, int* decimal_point,
+                                  Bignum* numerator, Bignum* denominator,
+                                  Vector<char>(buffer), int* length) {
+  ASSERT(count >= 0);
+  for (int i = 0; i < count - 1; ++i) {
+    uint16_t digit;
+    digit = numerator->DivideModuloIntBignum(*denominator);
+    ASSERT(digit <= 9);  // digit is a uint16_t and therefore always positive.
+    // digit = numerator / denominator (integer division).
+    // numerator = numerator % denominator.
+    buffer[i] = digit + '0';
+    // Prepare for next iteration.
+    numerator->Times10();
+  }
+  // Generate the last digit.
+  uint16_t digit;
+  digit = numerator->DivideModuloIntBignum(*denominator);
+  if (Bignum::PlusCompare(*numerator, *numerator, *denominator) >= 0) {
+    digit++;
+  }
+  buffer[count - 1] = digit + '0';
+  // Correct bad digits (in case we had a sequence of '9's). Propagate the
+  // carry until we hat a non-'9' or til we reach the first digit.
+  for (int i = count - 1; i > 0; --i) {
+    if (buffer[i] != '0' + 10) break;
+    buffer[i] = '0';
+    buffer[i - 1]++;
+  }
+  if (buffer[0] == '0' + 10) {
+    // Propagate a carry past the top place.
+    buffer[0] = '1';
+    (*decimal_point)++;
+  }
+  *length = count;
+}
+
+
+// Generates 'requested_digits' after the decimal point. It might omit
+// trailing '0's. If the input number is too small then no digits at all are
+// generated (ex.: 2 fixed digits for 0.00001).
+//
+// Input verifies:  1 <= (numerator + delta) / denominator < 10.
+static void BignumToFixed(int requested_digits, int* decimal_point,
+                          Bignum* numerator, Bignum* denominator,
+                          Vector<char>(buffer), int* length) {
+  // Note that we have to look at more than just the requested_digits, since
+  // a number could be rounded up. Example: v=0.5 with requested_digits=0.
+  // Even though the power of v equals 0 we can't just stop here.
+  if (-(*decimal_point) > requested_digits) {
+    // The number is definitively too small.
+    // Ex: 0.001 with requested_digits == 1.
+    // Set decimal-point to -requested_digits. This is what Gay does.
+    // Note that it should not have any effect anyways since the string is
+    // empty.
+    *decimal_point = -requested_digits;
+    *length = 0;
+    return;
+  } else if (-(*decimal_point) == requested_digits) {
+    // We only need to verify if the number rounds down or up.
+    // Ex: 0.04 and 0.06 with requested_digits == 1.
+    ASSERT(*decimal_point == -requested_digits);
+    // Initially the fraction lies in range (1, 10]. Multiply the denominator
+    // by 10 so that we can compare more easily.
+    denominator->Times10();
+    if (Bignum::PlusCompare(*numerator, *numerator, *denominator) >= 0) {
+      // If the fraction is >= 0.5 then we have to include the rounded
+      // digit.
+      buffer[0] = '1';
+      *length = 1;
+      (*decimal_point)++;
+    } else {
+      // Note that we caught most of similar cases earlier.
+      *length = 0;
+    }
+    return;
+  } else {
+    // The requested digits correspond to the digits after the point.
+    // The variable 'needed_digits' includes the digits before the point.
+    int needed_digits = (*decimal_point) + requested_digits;
+    GenerateCountedDigits(needed_digits, decimal_point,
+                          numerator, denominator,
+                          buffer, length);
+  }
+}
+
+
+// Returns an estimation of k such that 10^(k-1) <= v < 10^k where
+// v = f * 2^exponent and 2^52 <= f < 2^53.
+// v is hence a normalized double with the given exponent. The output is an
+// approximation for the exponent of the decimal approimation .digits * 10^k.
+//
+// The result might undershoot by 1 in which case 10^k <= v < 10^k+1.
+// Note: this property holds for v's upper boundary m+ too.
+//    10^k <= m+ < 10^k+1.
+//   (see explanation below).
+//
+// Examples:
+//  EstimatePower(0)   => 16
+//  EstimatePower(-52) => 0
+//
+// Note: e >= 0 => EstimatedPower(e) > 0. No similar claim can be made for e<0.
+static int EstimatePower(int exponent) {
+  // This function estimates log10 of v where v = f*2^e (with e == exponent).
+  // Note that 10^floor(log10(v)) <= v, but v <= 10^ceil(log10(v)).
+  // Note that f is bounded by its container size. Let p = 53 (the double's
+  // significand size). Then 2^(p-1) <= f < 2^p.
+  //
+  // Given that log10(v) == log2(v)/log2(10) and e+(len(f)-1) is quite close
+  // to log2(v) the function is simplified to (e+(len(f)-1)/log2(10)).
+  // The computed number undershoots by less than 0.631 (when we compute log3
+  // and not log10).
+  //
+  // Optimization: since we only need an approximated result this computation
+  // can be performed on 64 bit integers. On x86/x64 architecture the speedup is
+  // not really measurable, though.
+  //
+  // Since we want to avoid overshooting we decrement by 1e10 so that
+  // floating-point imprecisions don't affect us.
+  //
+  // Explanation for v's boundary m+: the computation takes advantage of
+  // the fact that 2^(p-1) <= f < 2^p. Boundaries still satisfy this requirement
+  // (even for denormals where the delta can be much more important).
+
+  const double k1Log10 = 0.30102999566398114;  // 1/lg(10)
+
+  // For doubles len(f) == 53 (don't forget the hidden bit).
+  const int kSignificandSize = 53;
+  double estimate = ceil((exponent + kSignificandSize - 1) * k1Log10 - 1e-10);
+  return static_cast<int>(estimate);
+}
+
+
+// See comments for InitialScaledStartValues.
+static void InitialScaledStartValuesPositiveExponent(
+    double v, int estimated_power, bool need_boundary_deltas,
+    Bignum* numerator, Bignum* denominator,
+    Bignum* delta_minus, Bignum* delta_plus) {
+  // A positive exponent implies a positive power.
+  ASSERT(estimated_power >= 0);
+  // Since the estimated_power is positive we simply multiply the denominator
+  // by 10^estimated_power.
+
+  // numerator = v.
+  numerator->AssignUInt64(Double(v).Significand());
+  numerator->ShiftLeft(Double(v).Exponent());
+  // denominator = 10^estimated_power.
+  denominator->AssignPowerUInt16(10, estimated_power);
+
+  if (need_boundary_deltas) {
+    // Introduce a common denominator so that the deltas to the boundaries are
+    // integers.
+    denominator->ShiftLeft(1);
+    numerator->ShiftLeft(1);
+    // Let v = f * 2^e, then m+ - v = 1/2 * 2^e; With the common
+    // denominator (of 2) delta_plus equals 2^e.
+    delta_plus->AssignUInt16(1);
+    delta_plus->ShiftLeft(Double(v).Exponent());
+    // Same for delta_minus (with adjustments below if f == 2^p-1).
+    delta_minus->AssignUInt16(1);
+    delta_minus->ShiftLeft(Double(v).Exponent());
+
+    // If the significand (without the hidden bit) is 0, then the lower
+    // boundary is closer than just half a ulp (unit in the last place).
+    // There is only one exception: if the next lower number is a denormal then
+    // the distance is 1 ulp. This cannot be the case for exponent >= 0 (but we
+    // have to test it in the other function where exponent < 0).
+    uint64_t v_bits = Double(v).AsUint64();
+    if ((v_bits & Double::kSignificandMask) == 0) {
+      // The lower boundary is closer at half the distance of "normal" numbers.
+      // Increase the common denominator and adapt all but the delta_minus.
+      denominator->ShiftLeft(1);  // *2
+      numerator->ShiftLeft(1);    // *2
+      delta_plus->ShiftLeft(1);   // *2
+    }
+  }
+}
+
+
+// See comments for InitialScaledStartValues
+static void InitialScaledStartValuesNegativeExponentPositivePower(
+    double v, int estimated_power, bool need_boundary_deltas,
+    Bignum* numerator, Bignum* denominator,
+    Bignum* delta_minus, Bignum* delta_plus) {
+  uint64_t significand = Double(v).Significand();
+  int exponent = Double(v).Exponent();
+  // v = f * 2^e with e < 0, and with estimated_power >= 0.
+  // This means that e is close to 0 (have a look at how estimated_power is
+  // computed).
+
+  // numerator = significand
+  //  since v = significand * 2^exponent this is equivalent to
+  //  numerator = v * / 2^-exponent
+  numerator->AssignUInt64(significand);
+  // denominator = 10^estimated_power * 2^-exponent (with exponent < 0)
+  denominator->AssignPowerUInt16(10, estimated_power);
+  denominator->ShiftLeft(-exponent);
+
+  if (need_boundary_deltas) {
+    // Introduce a common denominator so that the deltas to the boundaries are
+    // integers.
+    denominator->ShiftLeft(1);
+    numerator->ShiftLeft(1);
+    // Let v = f * 2^e, then m+ - v = 1/2 * 2^e; With the common
+    // denominator (of 2) delta_plus equals 2^e.
+    // Given that the denominator already includes v's exponent the distance
+    // to the boundaries is simply 1.
+    delta_plus->AssignUInt16(1);
+    // Same for delta_minus (with adjustments below if f == 2^p-1).
+    delta_minus->AssignUInt16(1);
+
+    // If the significand (without the hidden bit) is 0, then the lower
+    // boundary is closer than just one ulp (unit in the last place).
+    // There is only one exception: if the next lower number is a denormal
+    // then the distance is 1 ulp. Since the exponent is close to zero
+    // (otherwise estimated_power would have been negative) this cannot happen
+    // here either.
+    uint64_t v_bits = Double(v).AsUint64();
+    if ((v_bits & Double::kSignificandMask) == 0) {
+      // The lower boundary is closer at half the distance of "normal" numbers.
+      // Increase the denominator and adapt all but the delta_minus.
+      denominator->ShiftLeft(1);  // *2
+      numerator->ShiftLeft(1);    // *2
+      delta_plus->ShiftLeft(1);   // *2
+    }
+  }
+}
+
+
+// See comments for InitialScaledStartValues
+static void InitialScaledStartValuesNegativeExponentNegativePower(
+    double v, int estimated_power, bool need_boundary_deltas,
+    Bignum* numerator, Bignum* denominator,
+    Bignum* delta_minus, Bignum* delta_plus) {
+  const uint64_t kMinimalNormalizedExponent =
+      V8_2PART_UINT64_C(0x00100000, 00000000);
+  uint64_t significand = Double(v).Significand();
+  int exponent = Double(v).Exponent();
+  // Instead of multiplying the denominator with 10^estimated_power we
+  // multiply all values (numerator and deltas) by 10^-estimated_power.
+
+  // Use numerator as temporary container for power_ten.
+  Bignum* power_ten = numerator;
+  power_ten->AssignPowerUInt16(10, -estimated_power);
+
+  if (need_boundary_deltas) {
+    // Since power_ten == numerator we must make a copy of 10^estimated_power
+    // before we complete the computation of the numerator.
+    // delta_plus = delta_minus = 10^estimated_power
+    delta_plus->AssignBignum(*power_ten);
+    delta_minus->AssignBignum(*power_ten);
+  }
+
+  // numerator = significand * 2 * 10^-estimated_power
+  //  since v = significand * 2^exponent this is equivalent to
+  // numerator = v * 10^-estimated_power * 2 * 2^-exponent.
+  // Remember: numerator has been abused as power_ten. So no need to assign it
+  //  to itself.
+  ASSERT(numerator == power_ten);
+  numerator->MultiplyByUInt64(significand);
+
+  // denominator = 2 * 2^-exponent with exponent < 0.
+  denominator->AssignUInt16(1);
+  denominator->ShiftLeft(-exponent);
+
+  if (need_boundary_deltas) {
+    // Introduce a common denominator so that the deltas to the boundaries are
+    // integers.
+    numerator->ShiftLeft(1);
+    denominator->ShiftLeft(1);
+    // With this shift the boundaries have their correct value, since
+    // delta_plus = 10^-estimated_power, and
+    // delta_minus = 10^-estimated_power.
+    // These assignments have been done earlier.
+
+    // The special case where the lower boundary is twice as close.
+    // This time we have to look out for the exception too.
+    uint64_t v_bits = Double(v).AsUint64();
+    if ((v_bits & Double::kSignificandMask) == 0 &&
+        // The only exception where a significand == 0 has its boundaries at
+        // "normal" distances:
+        (v_bits & Double::kExponentMask) != kMinimalNormalizedExponent) {
+      numerator->ShiftLeft(1);    // *2
+      denominator->ShiftLeft(1);  // *2
+      delta_plus->ShiftLeft(1);   // *2
+    }
+  }
+}
+
+
+// Let v = significand * 2^exponent.
+// Computes v / 10^estimated_power exactly, as a ratio of two bignums, numerator
+// and denominator. The functions GenerateShortestDigits and
+// GenerateCountedDigits will then convert this ratio to its decimal
+// representation d, with the required accuracy.
+// Then d * 10^estimated_power is the representation of v.
+// (Note: the fraction and the estimated_power might get adjusted before
+// generating the decimal representation.)
+//
+// The initial start values consist of:
+//  - a scaled numerator: s.t. numerator/denominator == v / 10^estimated_power.
+//  - a scaled (common) denominator.
+//  optionally (used by GenerateShortestDigits to decide if it has the shortest
+//  decimal converting back to v):
+//  - v - m-: the distance to the lower boundary.
+//  - m+ - v: the distance to the upper boundary.
+//
+// v, m+, m-, and therefore v - m- and m+ - v all share the same denominator.
+//
+// Let ep == estimated_power, then the returned values will satisfy:
+//  v / 10^ep = numerator / denominator.
+//  v's boundarys m- and m+:
+//    m- / 10^ep == v / 10^ep - delta_minus / denominator
+//    m+ / 10^ep == v / 10^ep + delta_plus / denominator
+//  Or in other words:
+//    m- == v - delta_minus * 10^ep / denominator;
+//    m+ == v + delta_plus * 10^ep / denominator;
+//
+// Since 10^(k-1) <= v < 10^k    (with k == estimated_power)
+//  or       10^k <= v < 10^(k+1)
+//  we then have 0.1 <= numerator/denominator < 1
+//           or    1 <= numerator/denominator < 10
+//
+// It is then easy to kickstart the digit-generation routine.
+//
+// The boundary-deltas are only filled if need_boundary_deltas is set.
+static void InitialScaledStartValues(double v,
+                                     int estimated_power,
+                                     bool need_boundary_deltas,
+                                     Bignum* numerator,
+                                     Bignum* denominator,
+                                     Bignum* delta_minus,
+                                     Bignum* delta_plus) {
+  if (Double(v).Exponent() >= 0) {
+    InitialScaledStartValuesPositiveExponent(
+        v, estimated_power, need_boundary_deltas,
+        numerator, denominator, delta_minus, delta_plus);
+  } else if (estimated_power >= 0) {
+    InitialScaledStartValuesNegativeExponentPositivePower(
+        v, estimated_power, need_boundary_deltas,
+        numerator, denominator, delta_minus, delta_plus);
+  } else {
+    InitialScaledStartValuesNegativeExponentNegativePower(
+        v, estimated_power, need_boundary_deltas,
+        numerator, denominator, delta_minus, delta_plus);
+  }
+}
+
+
+// This routine multiplies numerator/denominator so that its values lies in the
+// range 1-10. That is after a call to this function we have:
+//    1 <= (numerator + delta_plus) /denominator < 10.
+// Let numerator the input before modification and numerator' the argument
+// after modification, then the output-parameter decimal_point is such that
+//  numerator / denominator * 10^estimated_power ==
+//    numerator' / denominator' * 10^(decimal_point - 1)
+// In some cases estimated_power was too low, and this is already the case. We
+// then simply adjust the power so that 10^(k-1) <= v < 10^k (with k ==
+// estimated_power) but do not touch the numerator or denominator.
+// Otherwise the routine multiplies the numerator and the deltas by 10.
+static void FixupMultiply10(int estimated_power, bool is_even,
+                            int* decimal_point,
+                            Bignum* numerator, Bignum* denominator,
+                            Bignum* delta_minus, Bignum* delta_plus) {
+  bool in_range;
+  if (is_even) {
+    // For IEEE doubles half-way cases (in decimal system numbers ending with 5)
+    // are rounded to the closest floating-point number with even significand.
+    in_range = Bignum::PlusCompare(*numerator, *delta_plus, *denominator) >= 0;
+  } else {
+    in_range = Bignum::PlusCompare(*numerator, *delta_plus, *denominator) > 0;
+  }
+  if (in_range) {
+    // Since numerator + delta_plus >= denominator we already have
+    // 1 <= numerator/denominator < 10. Simply update the estimated_power.
+    *decimal_point = estimated_power + 1;
+  } else {
+    *decimal_point = estimated_power;
+    numerator->Times10();
+    if (Bignum::Equal(*delta_minus, *delta_plus)) {
+      delta_minus->Times10();
+      delta_plus->AssignBignum(*delta_minus);
+    } else {
+      delta_minus->Times10();
+      delta_plus->Times10();
+    }
+  }
+}
+
+} }  // namespace v8::internal