| OLD | NEW |
|---|
| (Empty) |
| 1 // Copyright 2013 The Chromium Authors. All rights reserved. | |
| 2 // Use of this source code is governed by a BSD-style license that can be | |
| 3 // found in the LICENSE file. | |
| 4 | |
| 5 #ifndef NET_TOOLS_BALSA_BALSA_HEADERS_H_ | |
| 6 #define NET_TOOLS_BALSA_BALSA_HEADERS_H_ | |
| 7 | |
| 8 #include <algorithm> | |
| 9 #include <iosfwd> | |
| 10 #include <iterator> | |
| 11 #include <string> | |
| 12 #include <utility> | |
| 13 #include <vector> | |
| 14 | |
| 15 #include "base/logging.h" | |
| 16 #include "base/port.h" | |
| 17 #include "base/strings/string_piece.h" | |
| 18 #include "net/tools/balsa/balsa_enums.h" | |
| 19 #include "net/tools/balsa/string_piece_utils.h" | |
| 20 | |
| 21 namespace net { | |
| 22 | |
| 23 // WARNING: | |
| 24 // Note that -no- char* returned by any function in this | |
| 25 // file is null-terminated. | |
| 26 | |
| 27 // This class exists to service the specific needs of BalsaHeaders. | |
| 28 // | |
| 29 // Functional goals: | |
| 30 // 1) provide a backing-store for all of the StringPieces that BalsaHeaders | |
| 31 // returns. Every StringPiece returned from BalsaHeaders should remain | |
| 32 // valid until the BalsaHeader's object is cleared, or the header-line is | |
| 33 // erased. | |
| 34 // 2) provide a backing-store for BalsaFrame, which requires contiguous memory | |
| 35 // for its fast-path parsing functions. Note that the cost of copying is | |
| 36 // less than the cost of requiring the parser to do slow-path parsing, as | |
| 37 // it would have to check for bounds every byte, instead of every 16 bytes. | |
| 38 // | |
| 39 // This class is optimized for the case where headers are stored in one of two | |
| 40 // buffers. It doesn't make a lot of effort to densely pack memory-- in fact, | |
| 41 // it -may- be somewhat memory inefficient. This possible inefficiency allows a | |
| 42 // certain simplicity of implementation and speed which makes it worthwhile. | |
| 43 // If, in the future, better memory density is required, it should be possible | |
| 44 // to reuse the abstraction presented by this object to achieve those goals. | |
| 45 // | |
| 46 // In the most common use-case, this memory inefficiency should be relatively | |
| 47 // small. | |
| 48 // | |
| 49 // Alternate implementations of BalsaBuffer may include: | |
| 50 // - vector of strings, one per header line (similar to HTTPHeaders) | |
| 51 // - densely packed strings: | |
| 52 // - keep a sorted array/map of free-space linked lists or numbers. | |
| 53 // - use the entry that most closely first your needs. | |
| 54 // - at this point, perhaps just use a vector of strings, and let | |
| 55 // the allocator do the right thing. | |
| 56 // | |
| 57 class BalsaBuffer { | |
| 58 public: | |
| 59 static const size_t kDefaultBlocksize = 4096; | |
| 60 // We have two friends here. These exist as friends as we | |
| 61 // want to allow access to the constructors for the test | |
| 62 // class and the Balsa* classes. We put this into the | |
| 63 // header file as we want this class to be inlined into the | |
| 64 // BalsaHeaders implementation, yet be testable. | |
| 65 friend class BalsaBufferTestSpouse; | |
| 66 friend class BalsaHeaders; | |
| 67 friend class BalsaBufferTest; | |
| 68 | |
| 69 // The BufferBlock is a structure used internally by the | |
| 70 // BalsaBuffer class to store the base buffer pointers to | |
| 71 // each block, as well as the important metadata for buffer | |
| 72 // sizes and bytes free. | |
| 73 struct BufferBlock { | |
| 74 public: | |
| 75 char* buffer; | |
| 76 size_t buffer_size; | |
| 77 size_t bytes_free; | |
| 78 | |
| 79 size_t bytes_used() const { | |
| 80 return buffer_size - bytes_free; | |
| 81 } | |
| 82 char* start_of_unused_bytes() const { | |
| 83 return buffer + bytes_used(); | |
| 84 } | |
| 85 | |
| 86 BufferBlock() : buffer(NULL), buffer_size(0), bytes_free(0) {} | |
| 87 ~BufferBlock() {} | |
| 88 | |
| 89 BufferBlock(char* buf, size_t size, size_t free) : | |
| 90 buffer(buf), buffer_size(size), bytes_free(free) {} | |
| 91 // Yes we want this to be copyable (it gets stuck into vectors). | |
| 92 // For this reason, we don't use scoped ptrs, etc. here-- it | |
| 93 // is more efficient to manage this memory externally to this | |
| 94 // object. | |
| 95 }; | |
| 96 | |
| 97 typedef std::vector<BufferBlock> Blocks; | |
| 98 | |
| 99 ~BalsaBuffer(); | |
| 100 | |
| 101 // Returns the total amount of memory used by the buffer blocks. | |
| 102 size_t GetTotalBufferBlockSize() const; | |
| 103 | |
| 104 const char* GetPtr(Blocks::size_type block_idx) const { | |
| 105 DCHECK_LT(block_idx, blocks_.size()) | |
| 106 << block_idx << ", " << blocks_.size(); | |
| 107 return blocks_[block_idx].buffer; | |
| 108 } | |
| 109 | |
| 110 char* GetPtr(Blocks::size_type block_idx) { | |
| 111 DCHECK_LT(block_idx, blocks_.size()) | |
| 112 << block_idx << ", " << blocks_.size(); | |
| 113 return blocks_[block_idx].buffer; | |
| 114 } | |
| 115 | |
| 116 // This function is different from Write(), as it ensures that the data | |
| 117 // stored via subsequent calls to this function are all contiguous (and in | |
| 118 // the order in which these writes happened). This is essentially the same | |
| 119 // as a string append. | |
| 120 // | |
| 121 // You may call this function at any time between object | |
| 122 // construction/Clear(), and the calling of the | |
| 123 // NoMoreWriteToContiguousBuffer() function. | |
| 124 // | |
| 125 // You must not call this function after the NoMoreWriteToContiguousBuffer() | |
| 126 // function is called, unless a Clear() has been called since. | |
| 127 // If you do, the program will abort(). | |
| 128 // | |
| 129 // This condition is placed upon this code so that calls to Write() can | |
| 130 // append to the buffer in the first block safely, and without invaliding | |
| 131 // the StringPiece which it returns. | |
| 132 // | |
| 133 // This function's main intended user is the BalsaFrame class, which, | |
| 134 // for reasons of efficiency, requires that the buffer from which it parses | |
| 135 // the headers be contiguous. | |
| 136 // | |
| 137 void WriteToContiguousBuffer(const base::StringPiece& sp); | |
| 138 | |
| 139 void NoMoreWriteToContiguousBuffer() { | |
| 140 can_write_to_contiguous_buffer_ = false; | |
| 141 } | |
| 142 | |
| 143 // Takes a StringPiece and writes it to "permanent" storage, then returns a | |
| 144 // StringPiece which points to that data. If block_idx != NULL, it will be | |
| 145 // assigned the index of the block into which the data was stored. | |
| 146 // Note that the 'permanent' storage in which it stores data may be in | |
| 147 // the first block IFF the NoMoreWriteToContiguousBuffer function has | |
| 148 // been called since the last Clear/Construction. | |
| 149 base::StringPiece Write(const base::StringPiece& sp, | |
| 150 Blocks::size_type* block_buffer_idx); | |
| 151 | |
| 152 // Reserves "permanent" storage of the size indicated. Returns a pointer to | |
| 153 // the beginning of that storage, and assigns the index of the block used to | |
| 154 // block_buffer_idx. This function uses the first block IFF the | |
| 155 // NoMoreWriteToContiguousBuffer function has been called since the last | |
| 156 // Clear/Construction. | |
| 157 char* Reserve(size_t size, Blocks::size_type* block_buffer_idx); | |
| 158 | |
| 159 void Clear(); | |
| 160 | |
| 161 void Swap(BalsaBuffer* b); | |
| 162 | |
| 163 void CopyFrom(const BalsaBuffer& b); | |
| 164 | |
| 165 const char* StartOfFirstBlock() const { | |
| 166 return blocks_[0].buffer; | |
| 167 } | |
| 168 | |
| 169 const char* EndOfFirstBlock() const { | |
| 170 return blocks_[0].buffer + blocks_[0].bytes_used(); | |
| 171 } | |
| 172 | |
| 173 bool can_write_to_contiguous_buffer() const { | |
| 174 return can_write_to_contiguous_buffer_; | |
| 175 } | |
| 176 size_t blocksize() const { return blocksize_; } | |
| 177 Blocks::size_type num_blocks() const { return blocks_.size(); } | |
| 178 size_t buffer_size(size_t idx) const { return blocks_[idx].buffer_size; } | |
| 179 size_t bytes_used(size_t idx) const { return blocks_[idx].bytes_used(); } | |
| 180 | |
| 181 protected: | |
| 182 BalsaBuffer(); | |
| 183 | |
| 184 explicit BalsaBuffer(size_t blocksize); | |
| 185 | |
| 186 BufferBlock AllocBlock(); | |
| 187 | |
| 188 BufferBlock AllocCustomBlock(size_t blocksize); | |
| 189 | |
| 190 BufferBlock CopyBlock(const BufferBlock& b); | |
| 191 | |
| 192 // Cleans up the object. | |
| 193 // The block at start_idx, and all subsequent blocks | |
| 194 // will be cleared and have associated memory deleted. | |
| 195 void CleanupBlocksStartingFrom(Blocks::size_type start_idx); | |
| 196 | |
| 197 // A container of BufferBlocks | |
| 198 Blocks blocks_; | |
| 199 | |
| 200 // The default allocation size for a block. | |
| 201 // In general, blocksize_ bytes will be allocated for | |
| 202 // each buffer. | |
| 203 size_t blocksize_; | |
| 204 | |
| 205 // If set to true, then the first block cannot be used for Write() calls as | |
| 206 // the WriteToContiguous... function will modify the base pointer for this | |
| 207 // block, and the Write() calls need to be sure that the base pointer will | |
| 208 // not be changing in order to provide the user with StringPieces which | |
| 209 // continue to be valid. | |
| 210 bool can_write_to_contiguous_buffer_; | |
| 211 }; | |
| 212 | |
| 213 //////////////////////////////////////////////////////////////////////////////// | |
| 214 | |
| 215 // All of the functions in the BalsaHeaders class use string pieces, by either | |
| 216 // using the StringPiece class, or giving an explicit size and char* (as these | |
| 217 // are the native representation for these string pieces). | |
| 218 // This is done for several reasons. | |
| 219 // 1) This minimizes copying/allocation/deallocation as compared to using | |
| 220 // string parameters | |
| 221 // 2) This reduces the number of strlen() calls done (as the length of any | |
| 222 // string passed in is relatively likely to be known at compile time, and for | |
| 223 // those strings passed back we obviate the need for a strlen() to determine | |
| 224 // the size of new storage allocations if a new allocation is required. | |
| 225 // 3) This class attempts to store all of its data in two linear buffers in | |
| 226 // order to enhance the speed of parsing and writing out to a buffer. As a | |
| 227 // result, many string pieces are -not- terminated by '\0', and are not | |
| 228 // c-strings. Since this is the case, we must delineate the length of the | |
| 229 // string explicitly via a length. | |
| 230 // | |
| 231 // WARNING: The side effect of using StringPiece is that if the underlying | |
| 232 // buffer changes (due to modifying the headers) the StringPieces which point | |
| 233 // to the data which was modified, may now contain "garbage", and should not | |
| 234 // be dereferenced. | |
| 235 // For example, If you fetch some component of the first-line, (request or | |
| 236 // response), and then you modify the first line, the StringPieces you | |
| 237 // originally received from the original first-line may no longer be valid). | |
| 238 // | |
| 239 // StringPieces pointing to pieces of header lines which have not been | |
| 240 // erased() or modified should be valid until the object is cleared or | |
| 241 // destroyed. | |
| 242 | |
| 243 class BalsaHeaders { | |
| 244 public: | |
| 245 struct HeaderLineDescription { | |
| 246 HeaderLineDescription(size_t first_character_index, | |
| 247 size_t key_end_index, | |
| 248 size_t value_begin_index, | |
| 249 size_t last_character_index, | |
| 250 size_t buffer_base_index) : | |
| 251 first_char_idx(first_character_index), | |
| 252 key_end_idx(key_end_index), | |
| 253 value_begin_idx(value_begin_index), | |
| 254 last_char_idx(last_character_index), | |
| 255 buffer_base_idx(buffer_base_index), | |
| 256 skip(false) {} | |
| 257 | |
| 258 HeaderLineDescription() : | |
| 259 first_char_idx(0), | |
| 260 key_end_idx(0), | |
| 261 value_begin_idx(0), | |
| 262 last_char_idx(0), | |
| 263 buffer_base_idx(0), | |
| 264 skip(false) {} | |
| 265 | |
| 266 size_t first_char_idx; | |
| 267 size_t key_end_idx; | |
| 268 size_t value_begin_idx; | |
| 269 size_t last_char_idx; | |
| 270 BalsaBuffer::Blocks::size_type buffer_base_idx; | |
| 271 bool skip; | |
| 272 }; | |
| 273 | |
| 274 typedef std::vector<base::StringPiece> HeaderTokenList; | |
| 275 friend bool ParseHTTPFirstLine(const char* begin, | |
| 276 const char* end, | |
| 277 bool is_request, | |
| 278 size_t max_request_uri_length, | |
| 279 BalsaHeaders* headers, | |
| 280 BalsaFrameEnums::ErrorCode* error_code); | |
| 281 | |
| 282 protected: | |
| 283 typedef std::vector<HeaderLineDescription> HeaderLines; | |
| 284 | |
| 285 // Why these base classes (iterator_base, reverse_iterator_base)? Well, if | |
| 286 // we do want to export both iterator and const_iterator types (currently we | |
| 287 // only have const_iterator), then this is useful to avoid code duplication. | |
| 288 // Additionally, having this base class makes comparisons of iterators of | |
| 289 // different types (they're different types to ensure that operator= and | |
| 290 // constructors do not work in the places where they're expected to not work) | |
| 291 // work properly. There could be as many as 4 iterator types, all based on | |
| 292 // the same data as iterator_base... so it makes sense to simply have some | |
| 293 // base classes. | |
| 294 | |
| 295 class iterator_base { | |
| 296 public: | |
| 297 friend class BalsaHeaders; | |
| 298 friend class reverse_iterator_base; | |
| 299 typedef std::pair<base::StringPiece, base::StringPiece> StringPiecePair; | |
| 300 typedef StringPiecePair value_type; | |
| 301 typedef value_type& reference; | |
| 302 typedef value_type* pointer; | |
| 303 | |
| 304 typedef std::forward_iterator_tag iterator_category; | |
| 305 typedef ptrdiff_t difference_type; | |
| 306 | |
| 307 typedef iterator_base self; | |
| 308 | |
| 309 // default constructor. | |
| 310 iterator_base(); | |
| 311 | |
| 312 // copy constructor. | |
| 313 iterator_base(const iterator_base& it); | |
| 314 | |
| 315 reference operator*() const { | |
| 316 return Lookup(idx_); | |
| 317 } | |
| 318 | |
| 319 pointer operator->() const { | |
| 320 return &(this->operator*()); | |
| 321 } | |
| 322 | |
| 323 bool operator==(const self& it) const { | |
| 324 return idx_ == it.idx_; | |
| 325 } | |
| 326 | |
| 327 bool operator<(const self& it) const { | |
| 328 return idx_ < it.idx_; | |
| 329 } | |
| 330 | |
| 331 bool operator<=(const self& it) const { | |
| 332 return idx_ <= it.idx_; | |
| 333 } | |
| 334 | |
| 335 bool operator!=(const self& it) const { | |
| 336 return !(*this == it); | |
| 337 } | |
| 338 | |
| 339 bool operator>(const self& it) const { | |
| 340 return it < *this; | |
| 341 } | |
| 342 | |
| 343 bool operator>=(const self& it) const { | |
| 344 return it <= *this; | |
| 345 } | |
| 346 | |
| 347 // This mainly exists so that we can have interesting output for | |
| 348 // unittesting. The EXPECT_EQ, EXPECT_NE functions require that | |
| 349 // operator<< work for the classes it sees. It would be better if there | |
| 350 // was an additional traits-like system for the gUnit output... but oh | |
| 351 // well. | |
| 352 std::ostream& operator<<(std::ostream& os) const; | |
| 353 | |
| 354 protected: | |
| 355 iterator_base(const BalsaHeaders* headers, HeaderLines::size_type index); | |
| 356 | |
| 357 void increment() { | |
| 358 const HeaderLines& header_lines = headers_->header_lines_; | |
| 359 const HeaderLines::size_type header_lines_size = header_lines.size(); | |
| 360 const HeaderLines::size_type original_idx = idx_; | |
| 361 do { | |
| 362 ++idx_; | |
| 363 } while (idx_ < header_lines_size && header_lines[idx_].skip == true); | |
| 364 // The condition below exists so that ++(end() - 1) == end(), even | |
| 365 // if there are only 'skip == true' elements between the end() iterator | |
| 366 // and the end of the vector of HeaderLineDescriptions. | |
| 367 // TODO(fenix): refactor this list so that we don't have to do | |
| 368 // linear scanning through skipped headers (and this condition is | |
| 369 // then unnecessary) | |
| 370 if (idx_ == header_lines_size) { | |
| 371 idx_ = original_idx + 1; | |
| 372 } | |
| 373 } | |
| 374 | |
| 375 void decrement() { | |
| 376 const HeaderLines& header_lines = headers_->header_lines_; | |
| 377 const HeaderLines::size_type header_lines_size = header_lines.size(); | |
| 378 const HeaderLines::size_type original_idx = idx_; | |
| 379 do { | |
| 380 --idx_; | |
| 381 } while (idx_ < header_lines_size && header_lines[idx_].skip == true); | |
| 382 // The condition below exists so that --(rbegin() + 1) == rbegin(), even | |
| 383 // if there are only 'skip == true' elements between the rbegin() iterator | |
| 384 // and the beginning of the vector of HeaderLineDescriptions. | |
| 385 // TODO(fenix): refactor this list so that we don't have to do | |
| 386 // linear scanning through skipped headers (and this condition is | |
| 387 // then unnecessary) | |
| 388 if (idx_ > header_lines_size) { | |
| 389 idx_ = original_idx - 1; | |
| 390 } | |
| 391 } | |
| 392 | |
| 393 reference Lookup(HeaderLines::size_type index) const { | |
| 394 DCHECK_LT(index, headers_->header_lines_.size()); | |
| 395 const HeaderLineDescription& line = headers_->header_lines_[index]; | |
| 396 const char* stream_begin = headers_->GetPtr(line.buffer_base_idx); | |
| 397 value_ = value_type( | |
| 398 base::StringPiece(stream_begin + line.first_char_idx, | |
| 399 line.key_end_idx - line.first_char_idx), | |
| 400 base::StringPiece(stream_begin + line.value_begin_idx, | |
| 401 line.last_char_idx - line.value_begin_idx)); | |
| 402 DCHECK_GE(line.key_end_idx, line.first_char_idx); | |
| 403 DCHECK_GE(line.last_char_idx, line.value_begin_idx); | |
| 404 return value_; | |
| 405 } | |
| 406 | |
| 407 const BalsaHeaders* headers_; | |
| 408 HeaderLines::size_type idx_; | |
| 409 mutable StringPiecePair value_; | |
| 410 }; | |
| 411 | |
| 412 class reverse_iterator_base : public iterator_base { | |
| 413 public: | |
| 414 typedef reverse_iterator_base self; | |
| 415 typedef iterator_base::reference reference; | |
| 416 typedef iterator_base::pointer pointer; | |
| 417 using iterator_base::headers_; | |
| 418 using iterator_base::idx_; | |
| 419 | |
| 420 reverse_iterator_base() : iterator_base() {} | |
| 421 | |
| 422 // This constructor is no explicit purposely. | |
| 423 reverse_iterator_base(const iterator_base& it) : // NOLINT | |
| 424 iterator_base(it) { | |
| 425 } | |
| 426 | |
| 427 self& operator=(const iterator_base& it) { | |
| 428 idx_ = it.idx_; | |
| 429 headers_ = it.headers_; | |
| 430 return *this; | |
| 431 } | |
| 432 | |
| 433 self& operator=(const reverse_iterator_base& it) { | |
| 434 idx_ = it.idx_; | |
| 435 headers_ = it.headers_; | |
| 436 return *this; | |
| 437 } | |
| 438 | |
| 439 reference operator*() const { | |
| 440 return Lookup(idx_ - 1); | |
| 441 } | |
| 442 | |
| 443 pointer operator->() const { | |
| 444 return &(this->operator*()); | |
| 445 } | |
| 446 | |
| 447 reverse_iterator_base(const reverse_iterator_base& it) : | |
| 448 iterator_base(it) { } | |
| 449 | |
| 450 protected: | |
| 451 void increment() { | |
| 452 --idx_; | |
| 453 iterator_base::decrement(); | |
| 454 ++idx_; | |
| 455 } | |
| 456 | |
| 457 void decrement() { | |
| 458 ++idx_; | |
| 459 iterator_base::increment(); | |
| 460 --idx_; | |
| 461 } | |
| 462 | |
| 463 reverse_iterator_base(const BalsaHeaders* headers, | |
| 464 HeaderLines::size_type index) : | |
| 465 iterator_base(headers, index) {} | |
| 466 }; | |
| 467 | |
| 468 public: | |
| 469 class const_header_lines_iterator : public iterator_base { | |
| 470 friend class BalsaHeaders; | |
| 471 public: | |
| 472 typedef const_header_lines_iterator self; | |
| 473 const_header_lines_iterator() : iterator_base() {} | |
| 474 | |
| 475 const_header_lines_iterator(const const_header_lines_iterator& it) : | |
| 476 iterator_base(it.headers_, it.idx_) {} | |
| 477 | |
| 478 self& operator++() { | |
| 479 iterator_base::increment(); | |
| 480 return *this; | |
| 481 } | |
| 482 | |
| 483 self& operator--() { | |
| 484 iterator_base::decrement(); | |
| 485 return *this; | |
| 486 } | |
| 487 protected: | |
| 488 const_header_lines_iterator(const BalsaHeaders* headers, | |
| 489 HeaderLines::size_type index) : | |
| 490 iterator_base(headers, index) {} | |
| 491 }; | |
| 492 | |
| 493 class const_reverse_header_lines_iterator : public reverse_iterator_base { | |
| 494 public: | |
| 495 typedef const_reverse_header_lines_iterator self; | |
| 496 const_reverse_header_lines_iterator() : reverse_iterator_base() {} | |
| 497 | |
| 498 const_reverse_header_lines_iterator( | |
| 499 const const_header_lines_iterator& it) : | |
| 500 reverse_iterator_base(it.headers_, it.idx_) {} | |
| 501 | |
| 502 const_reverse_header_lines_iterator( | |
| 503 const const_reverse_header_lines_iterator& it) : | |
| 504 reverse_iterator_base(it.headers_, it.idx_) {} | |
| 505 | |
| 506 const_header_lines_iterator base() { | |
| 507 return const_header_lines_iterator(headers_, idx_); | |
| 508 } | |
| 509 | |
| 510 self& operator++() { | |
| 511 reverse_iterator_base::increment(); | |
| 512 return *this; | |
| 513 } | |
| 514 | |
| 515 self& operator--() { | |
| 516 reverse_iterator_base::decrement(); | |
| 517 return *this; | |
| 518 } | |
| 519 protected: | |
| 520 const_reverse_header_lines_iterator(const BalsaHeaders* headers, | |
| 521 HeaderLines::size_type index) : | |
| 522 reverse_iterator_base(headers, index) {} | |
| 523 | |
| 524 friend class BalsaHeaders; | |
| 525 }; | |
| 526 | |
| 527 // An iterator that only stops at lines with a particular key. | |
| 528 // See also GetIteratorForKey. | |
| 529 // | |
| 530 // Check against header_lines_key_end() to determine when iteration is | |
| 531 // finished. header_lines_end() will also work. | |
| 532 class const_header_lines_key_iterator : public iterator_base { | |
| 533 friend class BalsaHeaders; | |
| 534 public: | |
| 535 typedef const_header_lines_key_iterator self; | |
| 536 const_header_lines_key_iterator(const const_header_lines_key_iterator&); | |
| 537 | |
| 538 self& operator++() { | |
| 539 do { | |
| 540 iterator_base::increment(); | |
| 541 } while (!AtEnd() && | |
| 542 !StringPieceUtils::EqualIgnoreCase(key_, (**this).first)); | |
| 543 return *this; | |
| 544 } | |
| 545 | |
| 546 void operator++(int ignore) { | |
| 547 ++(*this); | |
| 548 } | |
| 549 | |
| 550 // Only forward-iteration makes sense, so no operator-- defined. | |
| 551 | |
| 552 private: | |
| 553 const_header_lines_key_iterator(const BalsaHeaders* headers, | |
| 554 HeaderLines::size_type index, | |
| 555 const base::StringPiece& key); | |
| 556 | |
| 557 // Should only be used for creating an end iterator. | |
| 558 const_header_lines_key_iterator(const BalsaHeaders* headers, | |
| 559 HeaderLines::size_type index); | |
| 560 | |
| 561 bool AtEnd() const { | |
| 562 return *this >= headers_->header_lines_end(); | |
| 563 } | |
| 564 | |
| 565 base::StringPiece key_; | |
| 566 }; | |
| 567 | |
| 568 // TODO(fenix): Revisit the amount of bytes initially allocated to the second | |
| 569 // block of the balsa_buffer_. It may make sense to pre-allocate some amount | |
| 570 // (roughly the amount we'd append in new headers such as X-User-Ip, etc.) | |
| 571 BalsaHeaders(); | |
| 572 ~BalsaHeaders(); | |
| 573 | |
| 574 const_header_lines_iterator header_lines_begin() { | |
| 575 return HeaderLinesBeginHelper<const_header_lines_iterator>(); | |
| 576 } | |
| 577 | |
| 578 const_header_lines_iterator header_lines_begin() const { | |
| 579 return HeaderLinesBeginHelper<const_header_lines_iterator>(); | |
| 580 } | |
| 581 | |
| 582 const_header_lines_iterator header_lines_end() { | |
| 583 return HeaderLinesEndHelper<const_header_lines_iterator>(); | |
| 584 } | |
| 585 | |
| 586 const_header_lines_iterator header_lines_end() const { | |
| 587 return HeaderLinesEndHelper<const_header_lines_iterator>(); | |
| 588 } | |
| 589 | |
| 590 const_reverse_header_lines_iterator header_lines_rbegin() { | |
| 591 return const_reverse_header_lines_iterator(header_lines_end()); | |
| 592 } | |
| 593 | |
| 594 const_reverse_header_lines_iterator header_lines_rbegin() const { | |
| 595 return const_reverse_header_lines_iterator(header_lines_end()); | |
| 596 } | |
| 597 | |
| 598 const_reverse_header_lines_iterator header_lines_rend() { | |
| 599 return const_reverse_header_lines_iterator(header_lines_begin()); | |
| 600 } | |
| 601 | |
| 602 const_reverse_header_lines_iterator header_lines_rend() const { | |
| 603 return const_reverse_header_lines_iterator(header_lines_begin()); | |
| 604 } | |
| 605 | |
| 606 const_header_lines_key_iterator header_lines_key_end() const { | |
| 607 return HeaderLinesEndHelper<const_header_lines_key_iterator>(); | |
| 608 } | |
| 609 | |
| 610 void erase(const const_header_lines_iterator& it) { | |
| 611 DCHECK_EQ(it.headers_, this); | |
| 612 DCHECK_LT(it.idx_, header_lines_.size()); | |
| 613 DCHECK_GE(it.idx_, 0u); | |
| 614 header_lines_[it.idx_].skip = true; | |
| 615 } | |
| 616 | |
| 617 void Clear(); | |
| 618 | |
| 619 void Swap(BalsaHeaders* other); | |
| 620 | |
| 621 void CopyFrom(const BalsaHeaders& other); | |
| 622 | |
| 623 void HackHeader(const base::StringPiece& key, const base::StringPiece& value); | |
| 624 | |
| 625 // Same as AppendToHeader, except that it will attempt to preserve | |
| 626 // header ordering. | |
| 627 // Note that this will always append to an existing header, if available, | |
| 628 // without moving the header around, or collapsing multiple header lines | |
| 629 // with the same key together. For this reason, it only 'attempts' to | |
| 630 // preserve header ordering. | |
| 631 // TODO(fenix): remove this function and rename all occurances | |
| 632 // of it in the code to AppendToHeader when the condition above | |
| 633 // has been satisified. | |
| 634 void HackAppendToHeader(const base::StringPiece& key, | |
| 635 const base::StringPiece& value); | |
| 636 | |
| 637 // Replaces header entries with key 'key' if they exist, or appends | |
| 638 // a new header if none exist. See 'AppendHeader' below for additional | |
| 639 // comments about ContentLength and TransferEncoding headers. Note that this | |
| 640 // will allocate new storage every time that it is called. | |
| 641 // TODO(fenix): modify this function to reuse existing storage | |
| 642 // if it is available. | |
| 643 void ReplaceOrAppendHeader(const base::StringPiece& key, | |
| 644 const base::StringPiece& value); | |
| 645 | |
| 646 // Append a new header entry to the header object. Clients who wish to append | |
| 647 // Content-Length header should use SetContentLength() method instead of | |
| 648 // adding the content length header using AppendHeader (manually adding the | |
| 649 // content length header will not update the content_length_ and | |
| 650 // content_length_status_ values). | |
| 651 // Similarly, clients who wish to add or remove the transfer encoding header | |
| 652 // in order to apply or remove chunked encoding should use SetChunkEncoding() | |
| 653 // instead. | |
| 654 void AppendHeader(const base::StringPiece& key, | |
| 655 const base::StringPiece& value); | |
| 656 | |
| 657 // Appends ',value' to an existing header named 'key'. If no header with the | |
| 658 // correct key exists, it will call AppendHeader(key, value). Calling this | |
| 659 // function on a key which exists several times in the headers will produce | |
| 660 // unpredictable results. | |
| 661 void AppendToHeader(const base::StringPiece& key, | |
| 662 const base::StringPiece& value); | |
| 663 | |
| 664 // Prepends 'value,' to an existing header named 'key'. If no header with the | |
| 665 // correct key exists, it will call AppendHeader(key, value). Calling this | |
| 666 // function on a key which exists several times in the headers will produce | |
| 667 // unpredictable results. | |
| 668 void PrependToHeader(const base::StringPiece& key, | |
| 669 const base::StringPiece& value); | |
| 670 | |
| 671 const base::StringPiece GetHeader(const base::StringPiece& key) const; | |
| 672 | |
| 673 // Iterates over all currently valid header lines, appending their | |
| 674 // values into the vector 'out', in top-to-bottom order. | |
| 675 // Header-lines which have been erased are not currently valid, and | |
| 676 // will not have their values appended. Empty values will be | |
| 677 // represented as empty string. If 'key' doesn't exist in the headers at | |
| 678 // all, out will not be changed. We do not clear the vector out | |
| 679 // before adding new entries. If there are header lines with matching | |
| 680 // key but empty value then they are also added to the vector out. | |
| 681 // (Basically empty values are not treated in any special manner). | |
| 682 // | |
| 683 // Example: | |
| 684 // Input header: | |
| 685 // "GET / HTTP/1.0\r\n" | |
| 686 // "key1: v1\r\n" | |
| 687 // "key1: \r\n" | |
| 688 // "key1:\r\n" | |
| 689 // "key1: v1\r\n" | |
| 690 // "key1:v2\r\n" | |
| 691 // | |
| 692 // vector out is initially: ["foo"] | |
| 693 // vector out after GetAllOfHeader("key1", &out) is: | |
| 694 // ["foo", "v1", "", "", "v2", "v1", "v2"] | |
| 695 | |
| 696 void GetAllOfHeader(const base::StringPiece& key, | |
| 697 std::vector<base::StringPiece>* out) const; | |
| 698 | |
| 699 // Joins all values for key into a comma-separated string in out. | |
| 700 // More efficient than calling JoinStrings on result of GetAllOfHeader if | |
| 701 // you don't need the intermediate vector<StringPiece>. | |
| 702 void GetAllOfHeaderAsString(const base::StringPiece& key, | |
| 703 std::string* out) const; | |
| 704 | |
| 705 // Returns true if RFC 2616 Section 14 indicates that header can | |
| 706 // have multiple values. | |
| 707 static bool IsMultivaluedHeader(const base::StringPiece& header); | |
| 708 | |
| 709 // Determine if a given header is present. | |
| 710 inline bool HasHeader(const base::StringPiece& key) const { | |
| 711 return (GetConstHeaderLinesIterator(key, header_lines_.begin()) != | |
| 712 header_lines_.end()); | |
| 713 } | |
| 714 | |
| 715 // Returns true iff any header 'key' exists with non-empty value. | |
| 716 bool HasNonEmptyHeader(const base::StringPiece& key) const; | |
| 717 | |
| 718 const_header_lines_iterator GetHeaderPosition( | |
| 719 const base::StringPiece& key) const; | |
| 720 | |
| 721 // Returns a forward-only iterator that only stops at lines matching key. | |
| 722 // String backing 'key' must remain valid for lifetime of iterator. | |
| 723 // | |
| 724 // Check returned iterator against header_lines_key_end() to determine when | |
| 725 // iteration is finished. | |
| 726 const_header_lines_key_iterator GetIteratorForKey( | |
| 727 const base::StringPiece& key) const; | |
| 728 | |
| 729 void RemoveAllOfHeader(const base::StringPiece& key); | |
| 730 | |
| 731 // Removes all headers starting with 'key' [case insensitive] | |
| 732 void RemoveAllHeadersWithPrefix(const base::StringPiece& key); | |
| 733 | |
| 734 // Returns the lower bound of memory used by this header object, including | |
| 735 // all internal buffers and data structure. Some of the memory used cannot be | |
| 736 // directly measure. For example, memory used for bookkeeping by standard | |
| 737 // containers. | |
| 738 size_t GetMemoryUsedLowerBound() const; | |
| 739 | |
| 740 // Returns the upper bound on the required buffer space to fully write out | |
| 741 // the header object (this include the first line, all header lines, and the | |
| 742 // final CRLF that marks the ending of the header). | |
| 743 size_t GetSizeForWriteBuffer() const; | |
| 744 | |
| 745 // The following WriteHeader* methods are template member functions that | |
| 746 // place one requirement on the Buffer class: it must implement a Write | |
| 747 // method that takes a pointer and a length. The buffer passed in is not | |
| 748 // required to be stretchable. For non-stretchable buffers, the user must | |
| 749 // call GetSizeForWriteBuffer() to find out the upper bound on the output | |
| 750 // buffer space required to make sure that the entire header is serialized. | |
| 751 // BalsaHeaders will not check that there is adequate space in the buffer | |
| 752 // object during the write. | |
| 753 | |
| 754 // Writes the entire header and the final CRLF that marks the end of the HTTP | |
| 755 // header section to the buffer. After this method returns, no more header | |
| 756 // data should be written to the buffer. | |
| 757 template <typename Buffer> | |
| 758 void WriteHeaderAndEndingToBuffer(Buffer* buffer) const { | |
| 759 WriteToBuffer(buffer); | |
| 760 WriteHeaderEndingToBuffer(buffer); | |
| 761 } | |
| 762 | |
| 763 // Writes the final CRLF to the buffer to terminate the HTTP header section. | |
| 764 // After this method returns, no more header data should be written to the | |
| 765 // buffer. | |
| 766 template <typename Buffer> | |
| 767 static void WriteHeaderEndingToBuffer(Buffer* buffer) { | |
| 768 buffer->Write("\r\n", 2); | |
| 769 } | |
| 770 | |
| 771 // Writes the entire header to the buffer without the CRLF that terminates | |
| 772 // the HTTP header. This lets users append additional header lines using | |
| 773 // WriteHeaderLineToBuffer and then terminate the header with | |
| 774 // WriteHeaderEndingToBuffer as the header is serialized to the | |
| 775 // buffer, without having to first copy the header. | |
| 776 template <typename Buffer> | |
| 777 void WriteToBuffer(Buffer* buffer) const { | |
| 778 // write the first line. | |
| 779 const size_t firstline_len = whitespace_4_idx_ - non_whitespace_1_idx_; | |
| 780 const char* stream_begin = GetPtr(firstline_buffer_base_idx_); | |
| 781 buffer->Write(stream_begin + non_whitespace_1_idx_, firstline_len); | |
| 782 buffer->Write("\r\n", 2); | |
| 783 const HeaderLines::size_type end = header_lines_.size(); | |
| 784 for (HeaderLines::size_type i = 0; i < end; ++i) { | |
| 785 const HeaderLineDescription& line = header_lines_[i]; | |
| 786 if (line.skip) { | |
| 787 continue; | |
| 788 } | |
| 789 const char* line_ptr = GetPtr(line.buffer_base_idx); | |
| 790 WriteHeaderLineToBuffer( | |
| 791 buffer, | |
| 792 base::StringPiece(line_ptr + line.first_char_idx, | |
| 793 line.key_end_idx - line.first_char_idx), | |
| 794 base::StringPiece(line_ptr + line.value_begin_idx, | |
| 795 line.last_char_idx - line.value_begin_idx)); | |
| 796 } | |
| 797 } | |
| 798 | |
| 799 // Takes a header line in the form of a key/value pair and append it to the | |
| 800 // buffer. This function should be called after WriteToBuffer to | |
| 801 // append additional header lines to the header without copying the header. | |
| 802 // When the user is done with appending to the buffer, | |
| 803 // WriteHeaderEndingToBuffer must be used to terminate the HTTP | |
| 804 // header in the buffer. This method is a no-op if key is empty. | |
| 805 template <typename Buffer> | |
| 806 static void WriteHeaderLineToBuffer(Buffer* buffer, | |
| 807 const base::StringPiece& key, | |
| 808 const base::StringPiece& value) { | |
| 809 // if the key is empty, we don't want to write the rest because it | |
| 810 // will not be a well-formed header line. | |
| 811 if (!key.empty()) { | |
| 812 buffer->Write(key.data(), key.size()); | |
| 813 buffer->Write(": ", 2); | |
| 814 buffer->Write(value.data(), value.size()); | |
| 815 buffer->Write("\r\n", 2); | |
| 816 } | |
| 817 } | |
| 818 | |
| 819 // Dump the textural representation of the header object to a string, which | |
| 820 // is suitable for writing out to logs. All CRLF will be printed out as \n. | |
| 821 // This function can be called on a header object in any state. The header | |
| 822 // content is appended to the string; the original content is not cleared. | |
| 823 void DumpHeadersToString(std::string* str) const; | |
| 824 | |
| 825 // Calls DumpHeadersToString to dump the textural representation of the header | |
| 826 // object to a string. Raw header data will be printed out if the header | |
| 827 // object is not completely parsed, e.g., when there was an error in the | |
| 828 // middle of parsing. | |
| 829 void DumpToString(std::string* str) const; | |
| 830 | |
| 831 const base::StringPiece first_line() const { | |
| 832 DCHECK_GE(whitespace_4_idx_, non_whitespace_1_idx_); | |
| 833 return base::StringPiece(BeginningOfFirstLine() + non_whitespace_1_idx_, | |
| 834 whitespace_4_idx_ - non_whitespace_1_idx_); | |
| 835 } | |
| 836 | |
| 837 // Returns the parsed value of the response code if it has been parsed. | |
| 838 // Guaranteed to return 0 when unparsed (though it is a much better idea to | |
| 839 // verify that the BalsaFrame had no errors while parsing). | |
| 840 // This may return response codes which are outside the normal bounds of | |
| 841 // HTTP response codes-- it is up to the user of this class to ensure that | |
| 842 // the response code is one which is interpretable. | |
| 843 size_t parsed_response_code() const { return parsed_response_code_; } | |
| 844 | |
| 845 const base::StringPiece request_method() const { | |
| 846 DCHECK_GE(whitespace_2_idx_, non_whitespace_1_idx_); | |
| 847 return base::StringPiece(BeginningOfFirstLine() + non_whitespace_1_idx_, | |
| 848 whitespace_2_idx_ - non_whitespace_1_idx_); | |
| 849 } | |
| 850 | |
| 851 const base::StringPiece response_version() const { | |
| 852 // Note: There is no difference between request_method() and | |
| 853 // response_version(). They both could be called | |
| 854 // GetFirstTokenFromFirstline()... but that wouldn't be anywhere near as | |
| 855 // descriptive. | |
| 856 return request_method(); | |
| 857 } | |
| 858 | |
| 859 const base::StringPiece request_uri() const { | |
| 860 DCHECK_GE(whitespace_3_idx_, non_whitespace_2_idx_); | |
| 861 return base::StringPiece(BeginningOfFirstLine() + non_whitespace_2_idx_, | |
| 862 whitespace_3_idx_ - non_whitespace_2_idx_); | |
| 863 } | |
| 864 | |
| 865 const base::StringPiece response_code() const { | |
| 866 // Note: There is no difference between request_uri() and response_code(). | |
| 867 // They both could be called GetSecondtTokenFromFirstline(), but, as noted | |
| 868 // in an earlier comment, that wouldn't be as descriptive. | |
| 869 return request_uri(); | |
| 870 } | |
| 871 | |
| 872 const base::StringPiece request_version() const { | |
| 873 DCHECK_GE(whitespace_4_idx_, non_whitespace_3_idx_); | |
| 874 return base::StringPiece(BeginningOfFirstLine() + non_whitespace_3_idx_, | |
| 875 whitespace_4_idx_ - non_whitespace_3_idx_); | |
| 876 } | |
| 877 | |
| 878 const base::StringPiece response_reason_phrase() const { | |
| 879 // Note: There is no difference between request_version() and | |
| 880 // response_reason_phrase(). They both could be called | |
| 881 // GetThirdTokenFromFirstline(), but, as noted in an earlier comment, that | |
| 882 // wouldn't be as descriptive. | |
| 883 return request_version(); | |
| 884 } | |
| 885 | |
| 886 // Note that SetFirstLine will not update the internal indices for the | |
| 887 // various bits of the first-line (and may set them all to zero). | |
| 888 // If you'd like to use the accessors for the various bits of the firstline, | |
| 889 // then you should use the Set* functions, or SetFirstlineFromStringPieces, | |
| 890 // below, instead. | |
| 891 // | |
| 892 void SetFirstlineFromStringPieces(const base::StringPiece& firstline_a, | |
| 893 const base::StringPiece& firstline_b, | |
| 894 const base::StringPiece& firstline_c); | |
| 895 | |
| 896 void SetRequestFirstlineFromStringPieces(const base::StringPiece& method, | |
| 897 const base::StringPiece& uri, | |
| 898 const base::StringPiece& version) { | |
| 899 SetFirstlineFromStringPieces(method, uri, version); | |
| 900 } | |
| 901 | |
| 902 void SetResponseFirstlineFromStringPieces( | |
| 903 const base::StringPiece& version, | |
| 904 const base::StringPiece& code, | |
| 905 const base::StringPiece& reason_phrase) { | |
| 906 SetFirstlineFromStringPieces(version, code, reason_phrase); | |
| 907 } | |
| 908 | |
| 909 // These functions are exactly the same, except that their names are | |
| 910 // different. This is done so that the code using this class is more | |
| 911 // expressive. | |
| 912 void SetRequestMethod(const base::StringPiece& method); | |
| 913 void SetResponseVersion(const base::StringPiece& version); | |
| 914 | |
| 915 void SetRequestUri(const base::StringPiece& uri); | |
| 916 void SetResponseCode(const base::StringPiece& code); | |
| 917 void set_parsed_response_code(size_t parsed_response_code) { | |
| 918 parsed_response_code_ = parsed_response_code; | |
| 919 } | |
| 920 void SetParsedResponseCodeAndUpdateFirstline(size_t parsed_response_code); | |
| 921 | |
| 922 // These functions are exactly the same, except that their names are | |
| 923 // different. This is done so that the code using this class is more | |
| 924 // expressive. | |
| 925 void SetRequestVersion(const base::StringPiece& version); | |
| 926 void SetResponseReasonPhrase(const base::StringPiece& reason_phrase); | |
| 927 | |
| 928 // The biggest problem with SetFirstLine is that we don't want to use a | |
| 929 // separate buffer for it. The second biggest problem with it is that the | |
| 930 // first biggest problem requires that we store offsets into a buffer instead | |
| 931 // of pointers into a buffer. Cuteness aside, SetFirstLine doesn't parse | |
| 932 // the individual fields of the firstline, and so accessors to those fields | |
| 933 // will not work properly after calling SetFirstLine. If you want those | |
| 934 // accessors to work, use the Set* functions above this one. | |
| 935 // SetFirstLine is stuff useful, however, if all you care about is correct | |
| 936 // serialization with the rest of the header object. | |
| 937 void SetFirstLine(const base::StringPiece& line); | |
| 938 | |
| 939 // Simple accessors to some of the internal state | |
| 940 bool transfer_encoding_is_chunked() const { | |
| 941 return transfer_encoding_is_chunked_; | |
| 942 } | |
| 943 | |
| 944 static bool ResponseCodeImpliesNoBody(size_t code) { | |
| 945 // From HTTP spec section 6.1.1 all 1xx responses must not have a body, | |
| 946 // as well as 204 No Content and 304 Not Modified. | |
| 947 return ((code >= 100) && (code <= 199)) || (code == 204) || (code == 304); | |
| 948 } | |
| 949 | |
| 950 // Note: never check this for requests. Nothing bad will happen if you do, | |
| 951 // but spec does not allow requests framed by connection close. | |
| 952 // TODO(vitaliyl): refactor. | |
| 953 bool is_framed_by_connection_close() const { | |
| 954 // We declare that response is framed by connection close if it has no | |
| 955 // content-length, no transfer encoding, and is allowed to have a body by | |
| 956 // the HTTP spec. | |
| 957 // parsed_response_code_ is 0 for requests, so ResponseCodeImpliesNoBody | |
| 958 // will return false. | |
| 959 return (content_length_status_ == BalsaHeadersEnums::NO_CONTENT_LENGTH) && | |
| 960 !transfer_encoding_is_chunked_ && | |
| 961 !ResponseCodeImpliesNoBody(parsed_response_code_); | |
| 962 } | |
| 963 | |
| 964 size_t content_length() const { return content_length_; } | |
| 965 BalsaHeadersEnums::ContentLengthStatus content_length_status() const { | |
| 966 return content_length_status_; | |
| 967 } | |
| 968 | |
| 969 // SetContentLength and SetChunkEncoding modifies the header object to use | |
| 970 // content-length and transfer-encoding headers in a consistent manner. They | |
| 971 // set all internal flags and status so client can get a consistent view from | |
| 972 // various accessors. | |
| 973 void SetContentLength(size_t length); | |
| 974 void SetChunkEncoding(bool chunk_encode); | |
| 975 | |
| 976 protected: | |
| 977 friend class BalsaFrame; | |
| 978 friend class SpdyFrame; | |
| 979 friend class HTTPMessage; | |
| 980 friend class BalsaHeadersTokenUtils; | |
| 981 | |
| 982 const char* BeginningOfFirstLine() const { | |
| 983 return GetPtr(firstline_buffer_base_idx_); | |
| 984 } | |
| 985 | |
| 986 char* GetPtr(BalsaBuffer::Blocks::size_type block_idx) { | |
| 987 return balsa_buffer_.GetPtr(block_idx); | |
| 988 } | |
| 989 | |
| 990 const char* GetPtr(BalsaBuffer::Blocks::size_type block_idx) const { | |
| 991 return balsa_buffer_.GetPtr(block_idx); | |
| 992 } | |
| 993 | |
| 994 void WriteFromFramer(const char* ptr, size_t size) { | |
| 995 balsa_buffer_.WriteToContiguousBuffer(base::StringPiece(ptr, size)); | |
| 996 } | |
| 997 | |
| 998 void DoneWritingFromFramer() { | |
| 999 balsa_buffer_.NoMoreWriteToContiguousBuffer(); | |
| 1000 } | |
| 1001 | |
| 1002 const char* OriginalHeaderStreamBegin() const { | |
| 1003 return balsa_buffer_.StartOfFirstBlock(); | |
| 1004 } | |
| 1005 | |
| 1006 const char* OriginalHeaderStreamEnd() const { | |
| 1007 return balsa_buffer_.EndOfFirstBlock(); | |
| 1008 } | |
| 1009 | |
| 1010 size_t GetReadableBytesFromHeaderStream() const { | |
| 1011 return OriginalHeaderStreamEnd() - OriginalHeaderStreamBegin(); | |
| 1012 } | |
| 1013 | |
| 1014 void GetReadablePtrFromHeaderStream(const char** p, size_t* s) { | |
| 1015 *p = OriginalHeaderStreamBegin(); | |
| 1016 *s = GetReadableBytesFromHeaderStream(); | |
| 1017 } | |
| 1018 | |
| 1019 base::StringPiece GetValueFromHeaderLineDescription( | |
| 1020 const HeaderLineDescription& line) const; | |
| 1021 | |
| 1022 void AddAndMakeDescription(const base::StringPiece& key, | |
| 1023 const base::StringPiece& value, | |
| 1024 HeaderLineDescription* d); | |
| 1025 | |
| 1026 void AppendOrPrependAndMakeDescription(const base::StringPiece& key, | |
| 1027 const base::StringPiece& value, | |
| 1028 bool append, | |
| 1029 HeaderLineDescription* d); | |
| 1030 | |
| 1031 // Removes all header lines with the given key starting at start. | |
| 1032 void RemoveAllOfHeaderStartingAt(const base::StringPiece& key, | |
| 1033 HeaderLines::iterator start); | |
| 1034 | |
| 1035 // If the 'key' does not exist in the headers, calls | |
| 1036 // AppendHeader(key, value). Otherwise if append is true, appends ',value' | |
| 1037 // to the first existing header with key 'key'. If append is false, prepends | |
| 1038 // 'value,' to the first existing header with key 'key'. | |
| 1039 void AppendOrPrependToHeader(const base::StringPiece& key, | |
| 1040 const base::StringPiece& value, | |
| 1041 bool append); | |
| 1042 | |
| 1043 HeaderLines::const_iterator GetConstHeaderLinesIterator( | |
| 1044 const base::StringPiece& key, | |
| 1045 HeaderLines::const_iterator start) const; | |
| 1046 | |
| 1047 HeaderLines::iterator GetHeaderLinesIteratorNoSkip( | |
| 1048 const base::StringPiece& key, | |
| 1049 HeaderLines::iterator start); | |
| 1050 | |
| 1051 HeaderLines::iterator GetHeaderLinesIterator( | |
| 1052 const base::StringPiece& key, | |
| 1053 HeaderLines::iterator start); | |
| 1054 | |
| 1055 template <typename IteratorType> | |
| 1056 const IteratorType HeaderLinesBeginHelper() const { | |
| 1057 if (header_lines_.empty()) { | |
| 1058 return IteratorType(this, 0); | |
| 1059 } | |
| 1060 const HeaderLines::size_type header_lines_size = header_lines_.size(); | |
| 1061 for (HeaderLines::size_type i = 0; i < header_lines_size; ++i) { | |
| 1062 if (header_lines_[i].skip == false) { | |
| 1063 return IteratorType(this, i); | |
| 1064 } | |
| 1065 } | |
| 1066 return IteratorType(this, 0); | |
| 1067 } | |
| 1068 | |
| 1069 template <typename IteratorType> | |
| 1070 const IteratorType HeaderLinesEndHelper() const { | |
| 1071 if (header_lines_.empty()) { | |
| 1072 return IteratorType(this, 0); | |
| 1073 } | |
| 1074 const HeaderLines::size_type header_lines_size = header_lines_.size(); | |
| 1075 HeaderLines::size_type i = header_lines_size; | |
| 1076 do { | |
| 1077 --i; | |
| 1078 if (header_lines_[i].skip == false) { | |
| 1079 return IteratorType(this, i + 1); | |
| 1080 } | |
| 1081 } while (i != 0); | |
| 1082 return IteratorType(this, 0); | |
| 1083 } | |
| 1084 | |
| 1085 // At the moment, this function will always return the original headers. | |
| 1086 // In the future, it may not do so after erasing header lines, modifying | |
| 1087 // header lines, or modifying the first line. | |
| 1088 // For this reason, it is strongly suggested that use of this function is | |
| 1089 // only acceptable for the purpose of debugging parse errors seen by the | |
| 1090 // BalsaFrame class. | |
| 1091 base::StringPiece OriginalHeadersForDebugging() const { | |
| 1092 return base::StringPiece(OriginalHeaderStreamBegin(), | |
| 1093 OriginalHeaderStreamEnd() - OriginalHeaderStreamBegin()); | |
| 1094 } | |
| 1095 | |
| 1096 BalsaBuffer balsa_buffer_; | |
| 1097 | |
| 1098 size_t content_length_; | |
| 1099 BalsaHeadersEnums::ContentLengthStatus content_length_status_; | |
| 1100 size_t parsed_response_code_; | |
| 1101 // HTTP firstlines all have the following structure: | |
| 1102 // LWS NONWS LWS NONWS LWS NONWS NOTCRLF CRLF | |
| 1103 // [\t \r\n]+ [^\t ]+ [\t ]+ [^\t ]+ [\t ]+ [^\t ]+ [^\r\n]+ "\r\n" | |
| 1104 // ws1 nws1 ws2 nws2 ws3 nws3 ws4 | |
| 1105 // | [-------) [-------) [----------------) | |
| 1106 // REQ: method request_uri version | |
| 1107 // RESP: version statuscode reason | |
| 1108 // | |
| 1109 // The first NONWS->LWS component we'll call firstline_a. | |
| 1110 // The second firstline_b, and the third firstline_c. | |
| 1111 // | |
| 1112 // firstline_a goes from nws1 to (but not including) ws2 | |
| 1113 // firstline_b goes from nws2 to (but not including) ws3 | |
| 1114 // firstline_c goes from nws3 to (but not including) ws4 | |
| 1115 // | |
| 1116 // In the code: | |
| 1117 // ws1 == whitespace_1_idx_ | |
| 1118 // nws1 == non_whitespace_1_idx_ | |
| 1119 // ws2 == whitespace_2_idx_ | |
| 1120 // nws2 == non_whitespace_2_idx_ | |
| 1121 // ws3 == whitespace_3_idx_ | |
| 1122 // nws3 == non_whitespace_3_idx_ | |
| 1123 // ws4 == whitespace_4_idx_ | |
| 1124 BalsaBuffer::Blocks::size_type firstline_buffer_base_idx_; | |
| 1125 size_t whitespace_1_idx_; | |
| 1126 size_t non_whitespace_1_idx_; | |
| 1127 size_t whitespace_2_idx_; | |
| 1128 size_t non_whitespace_2_idx_; | |
| 1129 size_t whitespace_3_idx_; | |
| 1130 size_t non_whitespace_3_idx_; | |
| 1131 size_t whitespace_4_idx_; | |
| 1132 size_t end_of_firstline_idx_; | |
| 1133 | |
| 1134 bool transfer_encoding_is_chunked_; | |
| 1135 | |
| 1136 HeaderLines header_lines_; | |
| 1137 }; | |
| 1138 | |
| 1139 } // namespace net | |
| 1140 | |
| 1141 #endif // NET_TOOLS_BALSA_BALSA_HEADERS_H_ | |
| OLD | NEW |
|---|
Chromium Code Reviews
Issue 992733002:
Remove //net (except for Android test stuff) and sdch (Closed)
Base URL: git@github.com:domokit/mojo.git@master