Add //third_party/sqlite to dirs_to_snapshot, remove net_sql.patch

third_party/sqlite/sqlite-src-3080704/test/ioerr2.test

+# 2007 April 2
+#
+# The author disclaims copyright to this source code.  In place of
+# a legal notice, here is a blessing:
+#
+#    May you do good and not evil.
+#    May you find forgiveness for yourself and forgive others.
+#    May you share freely, never taking more than you give.
+#
+#***********************************************************************
+# This file implements regression tests for SQLite library.  The
+# focus of this file is testing for correct handling of I/O errors
+# such as writes failing because the disk is full.
+# 
+# The tests in this file use special facilities that are only
+# available in the SQLite test fixture.
+#
+# $Id: ioerr2.test,v 1.12 2009/06/05 17:09:12 drh Exp $
+
+set testdir [file dirname $argv0]
+source $testdir/tester.tcl
+
+ifcapable !integrityck {
+  finish_test
+  return
+}
+
+do_test ioerr2-1.1 {
+  execsql {
+    PRAGMA cache_size = 10;
+    PRAGMA default_cache_size = 10;
+    CREATE TABLE t1(a, b, PRIMARY KEY(a, b));
+    INSERT INTO t1 VALUES(randstr(400,400),randstr(400,400));
+    INSERT INTO t1 SELECT randstr(400,400), randstr(400,400) FROM t1; -- 2
+    INSERT INTO t1 SELECT randstr(400,400), randstr(400,400) FROM t1; -- 4
+    INSERT INTO t1 SELECT randstr(400,400), randstr(400,400) FROM t1; -- 8
+    INSERT INTO t1 SELECT randstr(400,400), randstr(400,400) FROM t1; -- 16
+    INSERT INTO t1 SELECT randstr(400,400), randstr(400,400) FROM t1; -- 32
+  }
+} {}
+
+set ::cksum [execsql {SELECT md5sum(a, b) FROM t1}]
+proc check_db {testname} {
+
+  # Make sure no I/O errors are simulated in this proc.
+  set ::sqlite_io_error_hit 0
+  set ::sqlite_io_error_persist 0
+  set ::sqlite_io_error_pending 0
+
+  # Run an integrity-check. If "disk I/O error" is returned, the
+  # pager must be in error state. In this case open a new database
+  # connection. Otherwise, try a ROLLBACK, in case a transaction 
+  # is still active.
+  set rc [catch {execsql {PRAGMA integrity_check}} msg]
+  if {$rc && ($msg eq "disk I/O error" || $msg eq "database is locked")} {
+    db close
+    sqlite3 db test.db
+    set refcnt 0
+  } else {
+    if {$rc || $msg ne "ok"} {
+      error $msg
+    }
+    catch {execsql ROLLBACK}
+  }
+
+  # Check that the database checksum is still $::cksum, and that
+  # the integrity-check passes.
+  set ck [execsql {SELECT md5sum(a, b) FROM t1}]
+  do_test ${testname}.cksum [list set ck $ck] $::cksum
+  integrity_check ${testname}.integrity
+  do_test ${testname}.refcnt {
+    lindex [sqlite3_pager_refcounts db] 0
+  } 0
+}
+
+check_db ioerr2-2
+
+set sql {
+  PRAGMA cache_size = 10;
+  PRAGMA default_cache_size = 10;
+  BEGIN;
+  DELETE FROM t1 WHERE (oid%7)==0;
+  INSERT INTO t1 SELECT randstr(400,400), randstr(400,400) 
+    WHERE (random()%7)==0;
+  UPDATE t1 SET a = randstr(400,400), b = randstr(400,400) 
+    WHERE (random()%7)==0;
+  ROLLBACK;
+}
+
+foreach bPersist [list 0 1] {
+  set ::go 1
+  for {set ::N 1} {$::go} {incr ::N} {
+    db close
+    sqlite3 db test.db
+    set ::sqlite_io_error_hit 0
+    set ::sqlite_io_error_persist $bPersist
+    set ::sqlite_io_error_pending $::N
+
+    foreach {::go res} [catchsql $sql] {}
+    check_db ioerr2-3.$bPersist.$::N
+  }
+}
+foreach bPersist [list 0 1] {
+  set ::go 1
+  for {set ::N 1} {$::go} {incr ::N} {
+    set ::sqlite_io_error_hit 0
+    set ::sqlite_io_error_persist $bPersist
+    set ::sqlite_io_error_pending $::N
+
+    foreach {::go res} [catchsql $sql] {}
+    check_db ioerr2-4.[expr {$bPersist+2}].$::N
+  }
+}
+
+# When this test was written, an IO error within the UPDATE statement caused
+# a rollback, which tripped all read-cursors, causing the outer SELECT to
+# fail with "abort due to ROLLBACK". Now, the loop continues until the UPDATE
+# is run successfully. At this point the next IO error occurs within the 
+# SELECT - throwing the "disk I/O error" that the test case now expects.
+#
+do_test ioerr2-5 {
+  execsql {
+    CREATE TABLE t2 AS SELECT * FROM t1;
+    PRAGMA temp_store = memory;
+  }
+  set ::sqlite_io_error_persist 0
+  set ::go 1
+  set rc [catch {
+    for {set ::N 2} {$::N<200} {incr ::N} {
+      db eval {SELECT * FROM t1 WHERE rowid IN (1, 5, 10, 15, 20)} {
+        set ::sqlite_io_error_hit 0
+        set ::sqlite_io_error_pending $::N
+        set sql {UPDATE t2 SET b = randstr(400,400)}
+        foreach {::go res} [catchsql $sql] {}
+      }
+    }
+  } msg]
+  list $rc $msg
+} {1 {disk I/O error}} ;# used to be "{1 {abort due to ROLLBACK}}"
+
+if {$::tcl_platform(platform) == "unix"} {
+  # Cause the call to xAccess used by [pragma temp_store_directory] to
+  # determine if the specified directory is writable to fail. This causes
+  # SQLite to report "not a writable directory", which is probably the
+  # right answer.
+  #
+  do_test ioerr2-6 {
+    set ::sqlite_io_error_hit 0
+    set ::sqlite_io_error_pending 1
+    catchsql {PRAGMA temp_store_directory = '/tmp/'}
+  } {1 {not a writable directory}}
+}
+
+do_ioerr_test ioerr2-7 -persist 0 -sqlprep {
+  PRAGMA cache_size = 10;
+  PRAGMA auto_vacuum = 1;
+  CREATE TABLE ab(a, b);
+  CREATE TABLE de(d, e);
+  INSERT INTO ab VALUES(1, randstr(200,200));
+  INSERT INTO ab SELECT a+1, randstr(200,200) FROM ab;
+  INSERT INTO ab SELECT a+2, randstr(200,200) FROM ab;
+  INSERT INTO ab SELECT a+4, randstr(200,200) FROM ab;
+  INSERT INTO ab SELECT a+8, randstr(200,200) FROM ab;
+  INSERT INTO ab SELECT a+16, randstr(200,200) FROM ab;
+  INSERT INTO ab SELECT a+32, randstr(200,200) FROM ab;
+  INSERT INTO ab SELECT a+64, randstr(200,200) FROM ab;
+  INSERT INTO de SELECT * FROM ab;
+} -sqlbody {
+  BEGIN;
+  UPDATE ab SET b = randstr(200,200);
+  UPDATE de SET e = randstr(200,200) WHERE d = (SELECT max(d) FROM de);
+  DELETE FROM ab;
+  COMMIT;
+}
+
+finish_test