Import SQLite 3.8.7.4.

third_party/sqlite/amalgamation/sqlite3.h

 /*
 ** 2001 September 15
 **
 ** The author disclaims copyright to this source code.  In place of
 ** a legal notice, here is a blessing:
 **
 **    May you do good and not evil.
 **    May you find forgiveness for yourself and forgive others.
 **    May you share freely, never taking more than you give.
 **
@@ skipping 89 matching lines @@
 ** system</a>.  ^The SQLITE_SOURCE_ID macro evaluates to
 ** a string which identifies a particular check-in of SQLite
 ** within its configuration management system.  ^The SQLITE_SOURCE_ID
 ** string contains the date and time of the check-in (UTC) and an SHA1
 ** hash of the entire source tree.
 **
 ** See also: [sqlite3_libversion()],
 ** [sqlite3_libversion_number()], [sqlite3_sourceid()],
 ** [sqlite_version()] and [sqlite_source_id()].
 */
-#define SQLITE_VERSION        "3.7.6.3"
-#define SQLITE_VERSION_NUMBER 3007006
-#define SQLITE_SOURCE_ID      "2011-05-19 13:26:54 ed1da510a239ea767a01dc332b667119fa3c908e"
+#define SQLITE_VERSION        "3.8.7.4"
+#define SQLITE_VERSION_NUMBER 3008007
+#define SQLITE_SOURCE_ID      "2014-12-09 01:34:36 f66f7a17b78ba617acde90fc810107f34f1a1f2e"
 
 /*
 ** CAPI3REF: Run-Time Library Version Numbers
 ** KEYWORDS: sqlite3_version, sqlite3_sourceid
 **
 ** These interfaces provide the same information as the [SQLITE_VERSION],
 ** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros
 ** but are associated with the library instead of the header file.  ^(Cautious
 ** programmers might include assert() statements in their application to
 ** verify that values returned by these interfaces match the macros in
@@ skipping 47 matching lines @@
 */
 #ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS
 SQLITE_API int sqlite3_compileoption_used(const char *zOptName);
 SQLITE_API const char *sqlite3_compileoption_get(int N);
 #endif
 
 /*
 ** CAPI3REF: Test To See If The Library Is Threadsafe
 **
 ** ^The sqlite3_threadsafe() function returns zero if and only if
-** SQLite was compiled mutexing code omitted due to the
+** SQLite was compiled with mutexing code omitted due to the
 ** [SQLITE_THREADSAFE] compile-time option being set to 0.
 **
 ** SQLite can be compiled with or without mutexes.  When
 ** the [SQLITE_THREADSAFE] C preprocessor macro is 1 or 2, mutexes
 ** are enabled and SQLite is threadsafe.  When the
 ** [SQLITE_THREADSAFE] macro is 0, 
 ** the mutexes are omitted.  Without the mutexes, it is not safe
 ** to use SQLite concurrently from more than one thread.
 **
 ** Enabling mutexes incurs a measurable performance penalty.
@@ skipping 21 matching lines @@
 SQLITE_API int sqlite3_threadsafe(void);
 
 /*
 ** CAPI3REF: Database Connection Handle
 ** KEYWORDS: {database connection} {database connections}
 **
 ** Each open SQLite database is represented by a pointer to an instance of
 ** the opaque structure named "sqlite3".  It is useful to think of an sqlite3
 ** pointer as an object.  The [sqlite3_open()], [sqlite3_open16()], and
 ** [sqlite3_open_v2()] interfaces are its constructors, and [sqlite3_close()]
-** is its destructor.  There are many other interfaces (such as
+** and [sqlite3_close_v2()] are its destructors.  There are many other
+** interfaces (such as
 ** [sqlite3_prepare_v2()], [sqlite3_create_function()], and
 ** [sqlite3_busy_timeout()] to name but three) that are methods on an
 ** sqlite3 object.
 */
 typedef struct sqlite3 sqlite3;
 
 /*
 ** CAPI3REF: 64-Bit Integer Types
 ** KEYWORDS: sqlite_int64 sqlite_uint64
 **
@@ skipping 26 matching lines @@
 ** If compiling for a processor that lacks floating point support,
 ** substitute integer for floating-point.
 */
 #ifdef SQLITE_OMIT_FLOATING_POINT
 # define double sqlite3_int64
 #endif
 
 /*
 ** CAPI3REF: Closing A Database Connection
 **
-** ^The sqlite3_close() routine is the destructor for the [sqlite3] object.
-** ^Calls to sqlite3_close() return SQLITE_OK if the [sqlite3] object is
-** successfully destroyed and all associated resources are deallocated.
+** ^The sqlite3_close() and sqlite3_close_v2() routines are destructors
+** for the [sqlite3] object.
+** ^Calls to sqlite3_close() and sqlite3_close_v2() return [SQLITE_OK] if
+** the [sqlite3] object is successfully destroyed and all associated
+** resources are deallocated.
 **
-** Applications must [sqlite3_finalize | finalize] all [prepared statements]
-** and [sqlite3_blob_close | close] all [BLOB handles] associated with
-** the [sqlite3] object prior to attempting to close the object.  ^If
-** sqlite3_close() is called on a [database connection] that still has
-** outstanding [prepared statements] or [BLOB handles], then it returns
-** SQLITE_BUSY.
+** ^If the database connection is associated with unfinalized prepared
+** statements or unfinished sqlite3_backup objects then sqlite3_close()
+** will leave the database connection open and return [SQLITE_BUSY].
+** ^If sqlite3_close_v2() is called with unfinalized prepared statements
+** and/or unfinished sqlite3_backups, then the database connection becomes
+** an unusable "zombie" which will automatically be deallocated when the
+** last prepared statement is finalized or the last sqlite3_backup is
+** finished.  The sqlite3_close_v2() interface is intended for use with
+** host languages that are garbage collected, and where the order in which
+** destructors are called is arbitrary.
 **
-** ^If [sqlite3_close()] is invoked while a transaction is open,
+** Applications should [sqlite3_finalize | finalize] all [prepared statements],
+** [sqlite3_blob_close | close] all [BLOB handles], and 
+** [sqlite3_backup_finish | finish] all [sqlite3_backup] objects associated
+** with the [sqlite3] object prior to attempting to close the object.  ^If
+** sqlite3_close_v2() is called on a [database connection] that still has
+** outstanding [prepared statements], [BLOB handles], and/or
+** [sqlite3_backup] objects then it returns [SQLITE_OK] and the deallocation
+** of resources is deferred until all [prepared statements], [BLOB handles],
+** and [sqlite3_backup] objects are also destroyed.
+**
+** ^If an [sqlite3] object is destroyed while a transaction is open,
 ** the transaction is automatically rolled back.
 **
-** The C parameter to [sqlite3_close(C)] must be either a NULL
+** The C parameter to [sqlite3_close(C)] and [sqlite3_close_v2(C)]
+** must be either a NULL
 ** pointer or an [sqlite3] object pointer obtained
 ** from [sqlite3_open()], [sqlite3_open16()], or
 ** [sqlite3_open_v2()], and not previously closed.
-** ^Calling sqlite3_close() with a NULL pointer argument is a 
-** harmless no-op.
+** ^Calling sqlite3_close() or sqlite3_close_v2() with a NULL pointer
+** argument is a harmless no-op.
 */
-SQLITE_API int sqlite3_close(sqlite3 *);
+SQLITE_API int sqlite3_close(sqlite3*);
+SQLITE_API int sqlite3_close_v2(sqlite3*);
 
 /*
 ** The type for a callback function.
 ** This is legacy and deprecated.  It is included for historical
 ** compatibility and is not documented.
 */
 typedef int (*sqlite3_callback)(void*,int,char**, char**);
 
 /*
 ** CAPI3REF: One-Step Query Execution Interface
 **
 ** The sqlite3_exec() interface is a convenience wrapper around
 ** [sqlite3_prepare_v2()], [sqlite3_step()], and [sqlite3_finalize()],
 ** that allows an application to run multiple statements of SQL
 ** without having to use a lot of C code. 
 **
 ** ^The sqlite3_exec() interface runs zero or more UTF-8 encoded,
 ** semicolon-separate SQL statements passed into its 2nd argument,
 ** in the context of the [database connection] passed in as its 1st
 ** argument.  ^If the callback function of the 3rd argument to
 ** sqlite3_exec() is not NULL, then it is invoked for each result row
 ** coming out of the evaluated SQL statements.  ^The 4th argument to
-** to sqlite3_exec() is relayed through to the 1st argument of each
+** sqlite3_exec() is relayed through to the 1st argument of each
 ** callback invocation.  ^If the callback pointer to sqlite3_exec()
 ** is NULL, then no callback is ever invoked and result rows are
 ** ignored.
 **
 ** ^If an error occurs while evaluating the SQL statements passed into
 ** sqlite3_exec(), then execution of the current statement stops and
 ** subsequent statements are skipped.  ^If the 5th parameter to sqlite3_exec()
 ** is not NULL then any error message is written into memory obtained
 ** from [sqlite3_malloc()] and passed back through the 5th parameter.
 ** To avoid memory leaks, the application should invoke [sqlite3_free()]
@@ skipping 20 matching lines @@
 ** ^If the 2nd parameter to sqlite3_exec() is a NULL pointer, a pointer
 ** to an empty string, or a pointer that contains only whitespace and/or 
 ** SQL comments, then no SQL statements are evaluated and the database
 ** is not changed.
 **
 ** Restrictions:
 **
 ** <ul>
 ** <li> The application must insure that the 1st parameter to sqlite3_exec()
 **      is a valid and open [database connection].
-** <li> The application must not close [database connection] specified by
+** <li> The application must not close the [database connection] specified by
 **      the 1st parameter to sqlite3_exec() while sqlite3_exec() is running.
 ** <li> The application must not modify the SQL statement text passed into
 **      the 2nd parameter of sqlite3_exec() while sqlite3_exec() is running.
 ** </ul>
 */
 SQLITE_API int sqlite3_exec(
   sqlite3*,                                  /* An open database */
   const char *sql,                           /* SQL to be evaluated */
   int (*callback)(void*,int,char**,char**),  /* Callback function */
   void *,                                    /* 1st argument to callback */
   char **errmsg                              /* Error msg written here */
 );
 
 /*
 ** CAPI3REF: Result Codes
-** KEYWORDS: SQLITE_OK {error code} {error codes}
-** KEYWORDS: {result code} {result codes}
+** KEYWORDS: {result code definitions}
 **
 ** Many SQLite functions return an integer result code from the set shown
-** here in order to indicates success or failure.
+** here in order to indicate success or failure.
 **
 ** New error codes may be added in future versions of SQLite.
 **
-** See also: [SQLITE_IOERR_READ | extended result codes]
+** See also: [extended result code definitions]
 */
 #define SQLITE_OK           0   /* Successful result */
 /* beginning-of-error-codes */
 #define SQLITE_ERROR        1   /* SQL error or missing database */
 #define SQLITE_INTERNAL     2   /* Internal logic error in SQLite */
 #define SQLITE_PERM         3   /* Access permission denied */
 #define SQLITE_ABORT        4   /* Callback routine requested an abort */
 #define SQLITE_BUSY         5   /* The database file is locked */
 #define SQLITE_LOCKED       6   /* A table in the database is locked */
 #define SQLITE_NOMEM        7   /* A malloc() failed */
 #define SQLITE_READONLY     8   /* Attempt to write a readonly database */
 #define SQLITE_INTERRUPT    9   /* Operation terminated by sqlite3_interrupt()*/
 #define SQLITE_IOERR       10   /* Some kind of disk I/O error occurred */
 #define SQLITE_CORRUPT     11   /* The database disk image is malformed */
 #define SQLITE_NOTFOUND    12   /* Unknown opcode in sqlite3_file_control() */
 #define SQLITE_FULL        13   /* Insertion failed because database is full */
 #define SQLITE_CANTOPEN    14   /* Unable to open the database file */
 #define SQLITE_PROTOCOL    15   /* Database lock protocol error */
 #define SQLITE_EMPTY       16   /* Database is empty */
 #define SQLITE_SCHEMA      17   /* The database schema changed */
 #define SQLITE_TOOBIG      18   /* String or BLOB exceeds size limit */
 #define SQLITE_CONSTRAINT  19   /* Abort due to constraint violation */
 #define SQLITE_MISMATCH    20   /* Data type mismatch */
 #define SQLITE_MISUSE      21   /* Library used incorrectly */
 #define SQLITE_NOLFS       22   /* Uses OS features not supported on host */
 #define SQLITE_AUTH        23   /* Authorization denied */
 #define SQLITE_FORMAT      24   /* Auxiliary database format error */
 #define SQLITE_RANGE       25   /* 2nd parameter to sqlite3_bind out of range */
 #define SQLITE_NOTADB      26   /* File opened that is not a database file */
+#define SQLITE_NOTICE      27   /* Notifications from sqlite3_log() */
+#define SQLITE_WARNING     28   /* Warnings from sqlite3_log() */
 #define SQLITE_ROW         100  /* sqlite3_step() has another row ready */
 #define SQLITE_DONE        101  /* sqlite3_step() has finished executing */
 /* end-of-error-codes */
 
 /*
 ** CAPI3REF: Extended Result Codes
-** KEYWORDS: {extended error code} {extended error codes}
-** KEYWORDS: {extended result code} {extended result codes}
+** KEYWORDS: {extended result code definitions}
 **
-** In its default configuration, SQLite API routines return one of 26 integer
-** [SQLITE_OK | result codes].  However, experience has shown that many of
+** In its default configuration, SQLite API routines return one of 30 integer
+** [result codes].  However, experience has shown that many of
 ** these result codes are too coarse-grained.  They do not provide as
 ** much information about problems as programmers might like.  In an effort to
 ** address this, newer versions of SQLite (version 3.3.8 and later) include
 ** support for additional result codes that provide more detailed information
-** about errors. The extended result codes are enabled or disabled
+** about errors. These [extended result codes] are enabled or disabled
 ** on a per database connection basis using the
-** [sqlite3_extended_result_codes()] API.
-**
-** Some of the available extended result codes are listed here.
-** One may expect the number of extended result codes will be expand
-** over time.  Software that uses extended result codes should expect
-** to see new result codes in future releases of SQLite.
-**
-** The SQLITE_OK result code will never be extended.  It will always
-** be exactly zero.
+** [sqlite3_extended_result_codes()] API.  Or, the extended code for
+** the most recent error can be obtained using
+** [sqlite3_extended_errcode()].
 */
 #define SQLITE_IOERR_READ              (SQLITE_IOERR | (1<<8))
 #define SQLITE_IOERR_SHORT_READ        (SQLITE_IOERR | (2<<8))
 #define SQLITE_IOERR_WRITE             (SQLITE_IOERR | (3<<8))
 #define SQLITE_IOERR_FSYNC             (SQLITE_IOERR | (4<<8))
 #define SQLITE_IOERR_DIR_FSYNC         (SQLITE_IOERR | (5<<8))
 #define SQLITE_IOERR_TRUNCATE          (SQLITE_IOERR | (6<<8))
 #define SQLITE_IOERR_FSTAT             (SQLITE_IOERR | (7<<8))
 #define SQLITE_IOERR_UNLOCK            (SQLITE_IOERR | (8<<8))
 #define SQLITE_IOERR_RDLOCK            (SQLITE_IOERR | (9<<8))
 #define SQLITE_IOERR_DELETE            (SQLITE_IOERR | (10<<8))
 #define SQLITE_IOERR_BLOCKED           (SQLITE_IOERR | (11<<8))
 #define SQLITE_IOERR_NOMEM             (SQLITE_IOERR | (12<<8))
 #define SQLITE_IOERR_ACCESS            (SQLITE_IOERR | (13<<8))
 #define SQLITE_IOERR_CHECKRESERVEDLOCK (SQLITE_IOERR | (14<<8))
 #define SQLITE_IOERR_LOCK              (SQLITE_IOERR | (15<<8))
 #define SQLITE_IOERR_CLOSE             (SQLITE_IOERR | (16<<8))
 #define SQLITE_IOERR_DIR_CLOSE         (SQLITE_IOERR | (17<<8))
 #define SQLITE_IOERR_SHMOPEN           (SQLITE_IOERR | (18<<8))
 #define SQLITE_IOERR_SHMSIZE           (SQLITE_IOERR | (19<<8))
 #define SQLITE_IOERR_SHMLOCK           (SQLITE_IOERR | (20<<8))
+#define SQLITE_IOERR_SHMMAP            (SQLITE_IOERR | (21<<8))
+#define SQLITE_IOERR_SEEK              (SQLITE_IOERR | (22<<8))
+#define SQLITE_IOERR_DELETE_NOENT      (SQLITE_IOERR | (23<<8))
+#define SQLITE_IOERR_MMAP              (SQLITE_IOERR | (24<<8))
+#define SQLITE_IOERR_GETTEMPPATH       (SQLITE_IOERR | (25<<8))
+#define SQLITE_IOERR_CONVPATH          (SQLITE_IOERR | (26<<8))
 #define SQLITE_LOCKED_SHAREDCACHE      (SQLITE_LOCKED |  (1<<8))
 #define SQLITE_BUSY_RECOVERY           (SQLITE_BUSY   |  (1<<8))
+#define SQLITE_BUSY_SNAPSHOT           (SQLITE_BUSY   |  (2<<8))
 #define SQLITE_CANTOPEN_NOTEMPDIR      (SQLITE_CANTOPEN | (1<<8))
+#define SQLITE_CANTOPEN_ISDIR          (SQLITE_CANTOPEN | (2<<8))
+#define SQLITE_CANTOPEN_FULLPATH       (SQLITE_CANTOPEN | (3<<8))
+#define SQLITE_CANTOPEN_CONVPATH       (SQLITE_CANTOPEN | (4<<8))
+#define SQLITE_CORRUPT_VTAB            (SQLITE_CORRUPT | (1<<8))
+#define SQLITE_READONLY_RECOVERY       (SQLITE_READONLY | (1<<8))
+#define SQLITE_READONLY_CANTLOCK       (SQLITE_READONLY | (2<<8))
+#define SQLITE_READONLY_ROLLBACK       (SQLITE_READONLY | (3<<8))
+#define SQLITE_READONLY_DBMOVED        (SQLITE_READONLY | (4<<8))
+#define SQLITE_ABORT_ROLLBACK          (SQLITE_ABORT | (2<<8))
+#define SQLITE_CONSTRAINT_CHECK        (SQLITE_CONSTRAINT | (1<<8))
+#define SQLITE_CONSTRAINT_COMMITHOOK   (SQLITE_CONSTRAINT | (2<<8))
+#define SQLITE_CONSTRAINT_FOREIGNKEY   (SQLITE_CONSTRAINT | (3<<8))
+#define SQLITE_CONSTRAINT_FUNCTION     (SQLITE_CONSTRAINT | (4<<8))
+#define SQLITE_CONSTRAINT_NOTNULL      (SQLITE_CONSTRAINT | (5<<8))
+#define SQLITE_CONSTRAINT_PRIMARYKEY   (SQLITE_CONSTRAINT | (6<<8))
+#define SQLITE_CONSTRAINT_TRIGGER      (SQLITE_CONSTRAINT | (7<<8))
+#define SQLITE_CONSTRAINT_UNIQUE       (SQLITE_CONSTRAINT | (8<<8))
+#define SQLITE_CONSTRAINT_VTAB         (SQLITE_CONSTRAINT | (9<<8))
+#define SQLITE_CONSTRAINT_ROWID        (SQLITE_CONSTRAINT |(10<<8))
+#define SQLITE_NOTICE_RECOVER_WAL      (SQLITE_NOTICE | (1<<8))
+#define SQLITE_NOTICE_RECOVER_ROLLBACK (SQLITE_NOTICE | (2<<8))
+#define SQLITE_WARNING_AUTOINDEX       (SQLITE_WARNING | (1<<8))
+#define SQLITE_AUTH_USER               (SQLITE_AUTH | (1<<8))
 
 /*
 ** CAPI3REF: Flags For File Open Operations
 **
 ** These bit values are intended for use in the
 ** 3rd parameter to the [sqlite3_open_v2()] interface and
-** in the 4th parameter to the xOpen method of the
-** [sqlite3_vfs] object.
+** in the 4th parameter to the [sqlite3_vfs.xOpen] method.
 */
 #define SQLITE_OPEN_READONLY         0x00000001  /* Ok for sqlite3_open_v2() */
 #define SQLITE_OPEN_READWRITE        0x00000002  /* Ok for sqlite3_open_v2() */
 #define SQLITE_OPEN_CREATE           0x00000004  /* Ok for sqlite3_open_v2() */
 #define SQLITE_OPEN_DELETEONCLOSE    0x00000008  /* VFS only */
 #define SQLITE_OPEN_EXCLUSIVE        0x00000010  /* VFS only */
 #define SQLITE_OPEN_AUTOPROXY        0x00000020  /* VFS only */
+#define SQLITE_OPEN_URI              0x00000040  /* Ok for sqlite3_open_v2() */
+#define SQLITE_OPEN_MEMORY           0x00000080  /* Ok for sqlite3_open_v2() */
 #define SQLITE_OPEN_MAIN_DB          0x00000100  /* VFS only */
 #define SQLITE_OPEN_TEMP_DB          0x00000200  /* VFS only */
 #define SQLITE_OPEN_TRANSIENT_DB     0x00000400  /* VFS only */
 #define SQLITE_OPEN_MAIN_JOURNAL     0x00000800  /* VFS only */
 #define SQLITE_OPEN_TEMP_JOURNAL     0x00001000  /* VFS only */
 #define SQLITE_OPEN_SUBJOURNAL       0x00002000  /* VFS only */
 #define SQLITE_OPEN_MASTER_JOURNAL   0x00004000  /* VFS only */
 #define SQLITE_OPEN_NOMUTEX          0x00008000  /* Ok for sqlite3_open_v2() */
 #define SQLITE_OPEN_FULLMUTEX        0x00010000  /* Ok for sqlite3_open_v2() */
 #define SQLITE_OPEN_SHAREDCACHE      0x00020000  /* Ok for sqlite3_open_v2() */
 #define SQLITE_OPEN_PRIVATECACHE     0x00040000  /* Ok for sqlite3_open_v2() */
 #define SQLITE_OPEN_WAL              0x00080000  /* VFS only */
 
 /* Reserved:                         0x00F00000 */
 
 /*
 ** CAPI3REF: Device Characteristics
 **
 ** The xDeviceCharacteristics method of the [sqlite3_io_methods]
-** object returns an integer which is a vector of the these
+** object returns an integer which is a vector of these
 ** bit values expressing I/O characteristics of the mass storage
 ** device that holds the file that the [sqlite3_io_methods]
 ** refers to.
 **
 ** The SQLITE_IOCAP_ATOMIC property means that all writes of
 ** any size are atomic.  The SQLITE_IOCAP_ATOMICnnn values
 ** mean that writes of blocks that are nnn bytes in size and
 ** are aligned to an address which is an integer multiple of
 ** nnn are atomic.  The SQLITE_IOCAP_SAFE_APPEND value means
 ** that when data is appended to a file, the data is appended
 ** first then the size of the file is extended, never the other
 ** way around.  The SQLITE_IOCAP_SEQUENTIAL property means that
 ** information is written to disk in the same order as calls
-** to xWrite().
+** to xWrite().  The SQLITE_IOCAP_POWERSAFE_OVERWRITE property means that
+** after reboot following a crash or power loss, the only bytes in a
+** file that were written at the application level might have changed
+** and that adjacent bytes, even bytes within the same sector are
+** guaranteed to be unchanged.  The SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN
+** flag indicate that a file cannot be deleted when open.  The
+** SQLITE_IOCAP_IMMUTABLE flag indicates that the file is on
+** read-only media and cannot be changed even by processes with
+** elevated privileges.
 */
 #define SQLITE_IOCAP_ATOMIC                 0x00000001
 #define SQLITE_IOCAP_ATOMIC512              0x00000002
 #define SQLITE_IOCAP_ATOMIC1K               0x00000004
 #define SQLITE_IOCAP_ATOMIC2K               0x00000008
 #define SQLITE_IOCAP_ATOMIC4K               0x00000010
 #define SQLITE_IOCAP_ATOMIC8K               0x00000020
 #define SQLITE_IOCAP_ATOMIC16K              0x00000040
 #define SQLITE_IOCAP_ATOMIC32K              0x00000080
 #define SQLITE_IOCAP_ATOMIC64K              0x00000100
 #define SQLITE_IOCAP_SAFE_APPEND            0x00000200
 #define SQLITE_IOCAP_SEQUENTIAL             0x00000400
 #define SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN  0x00000800
+#define SQLITE_IOCAP_POWERSAFE_OVERWRITE    0x00001000
+#define SQLITE_IOCAP_IMMUTABLE              0x00002000
 
 /*
 ** CAPI3REF: File Locking Levels
 **
 ** SQLite uses one of these integer values as the second
 ** argument to calls it makes to the xLock() and xUnlock() methods
 ** of an [sqlite3_io_methods] object.
 */
 #define SQLITE_LOCK_NONE          0
 #define SQLITE_LOCK_SHARED        1
@@ skipping 43 matching lines @@
 ** I/O operations on the open file.
 */
 typedef struct sqlite3_file sqlite3_file;
 struct sqlite3_file {
   const struct sqlite3_io_methods *pMethods;  /* Methods for an open file */
 };
 
 /*
 ** CAPI3REF: OS Interface File Virtual Methods Object
 **
-** Every file opened by the [sqlite3_vfs] xOpen method populates an
+** Every file opened by the [sqlite3_vfs.xOpen] method populates an
 ** [sqlite3_file] object (or, more commonly, a subclass of the
 ** [sqlite3_file] object) with a pointer to an instance of this object.
 ** This object defines the methods used to perform various operations
 ** against the open file represented by the [sqlite3_file] object.
 **
-** If the xOpen method sets the sqlite3_file.pMethods element 
+** If the [sqlite3_vfs.xOpen] method sets the sqlite3_file.pMethods element 
 ** to a non-NULL pointer, then the sqlite3_io_methods.xClose method
-** may be invoked even if the xOpen reported that it failed.  The
-** only way to prevent a call to xClose following a failed xOpen
-** is for the xOpen to set the sqlite3_file.pMethods element to NULL.
+** may be invoked even if the [sqlite3_vfs.xOpen] reported that it failed.  The
+** only way to prevent a call to xClose following a failed [sqlite3_vfs.xOpen]
+** is for the [sqlite3_vfs.xOpen] to set the sqlite3_file.pMethods element
+** to NULL.
 **
 ** The flags argument to xSync may be one of [SQLITE_SYNC_NORMAL] or
 ** [SQLITE_SYNC_FULL].  The first choice is the normal fsync().
 ** The second choice is a Mac OS X style fullsync.  The [SQLITE_SYNC_DATAONLY]
 ** flag may be ORed in to indicate that only the data of the file
 ** and not its inode needs to be synced.
 **
 ** The integer values to xLock() and xUnlock() are one of
 ** <ul>
 ** <li> [SQLITE_LOCK_NONE],
@@ skipping 11 matching lines @@
 ** The xFileControl() method is a generic interface that allows custom
 ** VFS implementations to directly control an open file using the
 ** [sqlite3_file_control()] interface.  The second "op" argument is an
 ** integer opcode.  The third argument is a generic pointer intended to
 ** point to a structure that may contain arguments or space in which to
 ** write return values.  Potential uses for xFileControl() might be
 ** functions to enable blocking locks with timeouts, to change the
 ** locking strategy (for example to use dot-file locks), to inquire
 ** about the status of a lock, or to break stale locks.  The SQLite
 ** core reserves all opcodes less than 100 for its own use.
-** A [SQLITE_FCNTL_LOCKSTATE | list of opcodes] less than 100 is available.
+** A [file control opcodes | list of opcodes] less than 100 is available.
 ** Applications that define a custom xFileControl method should use opcodes
 ** greater than 100 to avoid conflicts.  VFS implementations should
 ** return [SQLITE_NOTFOUND] for file control opcodes that they do not
 ** recognize.
 **
 ** The xSectorSize() method returns the sector size of the
 ** device that underlies the file.  The sector size is the
 ** minimum write that can be performed without disturbing
 ** other bytes in the file.  The xDeviceCharacteristics()
 ** method returns a bit vector describing behaviors of the
@@ skipping 44 matching lines @@
   int (*xCheckReservedLock)(sqlite3_file*, int *pResOut);
   int (*xFileControl)(sqlite3_file*, int op, void *pArg);
   int (*xSectorSize)(sqlite3_file*);
   int (*xDeviceCharacteristics)(sqlite3_file*);
   /* Methods above are valid for version 1 */
   int (*xShmMap)(sqlite3_file*, int iPg, int pgsz, int, void volatile**);
   int (*xShmLock)(sqlite3_file*, int offset, int n, int flags);
   void (*xShmBarrier)(sqlite3_file*);
   int (*xShmUnmap)(sqlite3_file*, int deleteFlag);
   /* Methods above are valid for version 2 */
+  int (*xFetch)(sqlite3_file*, sqlite3_int64 iOfst, int iAmt, void **pp);
+  int (*xUnfetch)(sqlite3_file*, sqlite3_int64 iOfst, void *p);
+  /* Methods above are valid for version 3 */
   /* Additional methods may be added in future releases */
 };
 
 /*
 ** CAPI3REF: Standard File Control Opcodes
+** KEYWORDS: {file control opcodes} {file control opcode}
 **
 ** These integer constants are opcodes for the xFileControl method
 ** of the [sqlite3_io_methods] object and for the [sqlite3_file_control()]
 ** interface.
 **
 ** The [SQLITE_FCNTL_LOCKSTATE] opcode is used for debugging.  This
 ** opcode causes the xFileControl method to write the current state of
 ** the lock (one of [SQLITE_LOCK_NONE], [SQLITE_LOCK_SHARED],
 ** [SQLITE_LOCK_RESERVED], [SQLITE_LOCK_PENDING], or [SQLITE_LOCK_EXCLUSIVE])
 ** into an integer that the pArg argument points to. This capability
 ** is used during testing and only needs to be supported when SQLITE_TEST
 ** is defined.
-**
+** <ul>
+** <li>[[SQLITE_FCNTL_SIZE_HINT]]
 ** The [SQLITE_FCNTL_SIZE_HINT] opcode is used by SQLite to give the VFS
 ** layer a hint of how large the database file will grow to be during the
 ** current transaction.  This hint is not guaranteed to be accurate but it
 ** is often close.  The underlying VFS might choose to preallocate database
 ** file space based on this hint in order to help writes to the database
 ** file run faster.
 **
+** <li>[[SQLITE_FCNTL_CHUNK_SIZE]]
 ** The [SQLITE_FCNTL_CHUNK_SIZE] opcode is used to request that the VFS
 ** extends and truncates the database file in chunks of a size specified
 ** by the user. The fourth argument to [sqlite3_file_control()] should 
 ** point to an integer (type int) containing the new chunk-size to use
 ** for the nominated database. Allocating database file space in large
 ** chunks (say 1MB at a time), may reduce file-system fragmentation and
 ** improve performance on some systems.
 **
+** <li>[[SQLITE_FCNTL_FILE_POINTER]]
 ** The [SQLITE_FCNTL_FILE_POINTER] opcode is used to obtain a pointer
 ** to the [sqlite3_file] object associated with a particular database
 ** connection.  See the [sqlite3_file_control()] documentation for
 ** additional information.
 **
-** ^(The [SQLITE_FCNTL_SYNC_OMITTED] opcode is generated internally by
-** SQLite and sent to all VFSes in place of a call to the xSync method
-** when the database connection has [PRAGMA synchronous] set to OFF.)^
-** Some specialized VFSes need this signal in order to operate correctly
-** when [PRAGMA synchronous | PRAGMA synchronous=OFF] is set, but most 
-** VFSes do not need this signal and should silently ignore this opcode.
-** Applications should not call [sqlite3_file_control()] with this
-** opcode as doing so may disrupt the operation of the specialized VFSes
-** that do require it.  
+** <li>[[SQLITE_FCNTL_SYNC_OMITTED]]
+** No longer in use.
+**
+** <li>[[SQLITE_FCNTL_SYNC]]
+** The [SQLITE_FCNTL_SYNC] opcode is generated internally by SQLite and
+** sent to the VFS immediately before the xSync method is invoked on a
+** database file descriptor. Or, if the xSync method is not invoked 
+** because the user has configured SQLite with 
+** [PRAGMA synchronous | PRAGMA synchronous=OFF] it is invoked in place 
+** of the xSync method. In most cases, the pointer argument passed with
+** this file-control is NULL. However, if the database file is being synced
+** as part of a multi-database commit, the argument points to a nul-terminated
+** string containing the transactions master-journal file name. VFSes that 
+** do not need this signal should silently ignore this opcode. Applications 
+** should not call [sqlite3_file_control()] with this opcode as doing so may 
+** disrupt the operation of the specialized VFSes that do require it.  
+**
+** <li>[[SQLITE_FCNTL_COMMIT_PHASETWO]]
+** The [SQLITE_FCNTL_COMMIT_PHASETWO] opcode is generated internally by SQLite
+** and sent to the VFS after a transaction has been committed immediately
+** but before the database is unlocked. VFSes that do not need this signal
+** should silently ignore this opcode. Applications should not call
+** [sqlite3_file_control()] with this opcode as doing so may disrupt the 
+** operation of the specialized VFSes that do require it.  
+**
+** <li>[[SQLITE_FCNTL_WIN32_AV_RETRY]]
+** ^The [SQLITE_FCNTL_WIN32_AV_RETRY] opcode is used to configure automatic
+** retry counts and intervals for certain disk I/O operations for the
+** windows [VFS] in order to provide robustness in the presence of
+** anti-virus programs.  By default, the windows VFS will retry file read,
+** file write, and file delete operations up to 10 times, with a delay
+** of 25 milliseconds before the first retry and with the delay increasing
+** by an additional 25 milliseconds with each subsequent retry.  This
+** opcode allows these two values (10 retries and 25 milliseconds of delay)
+** to be adjusted.  The values are changed for all database connections
+** within the same process.  The argument is a pointer to an array of two
+** integers where the first integer i the new retry count and the second
+** integer is the delay.  If either integer is negative, then the setting
+** is not changed but instead the prior value of that setting is written
+** into the array entry, allowing the current retry settings to be
+** interrogated.  The zDbName parameter is ignored.
+**
+** <li>[[SQLITE_FCNTL_PERSIST_WAL]]
+** ^The [SQLITE_FCNTL_PERSIST_WAL] opcode is used to set or query the
+** persistent [WAL | Write Ahead Log] setting.  By default, the auxiliary
+** write ahead log and shared memory files used for transaction control
+** are automatically deleted when the latest connection to the database
+** closes.  Setting persistent WAL mode causes those files to persist after
+** close.  Persisting the files is useful when other processes that do not
+** have write permission on the directory containing the database file want
+** to read the database file, as the WAL and shared memory files must exist
+** in order for the database to be readable.  The fourth parameter to
+** [sqlite3_file_control()] for this opcode should be a pointer to an integer.
+** That integer is 0 to disable persistent WAL mode or 1 to enable persistent
+** WAL mode.  If the integer is -1, then it is overwritten with the current
+** WAL persistence setting.
+**
+** <li>[[SQLITE_FCNTL_POWERSAFE_OVERWRITE]]
+** ^The [SQLITE_FCNTL_POWERSAFE_OVERWRITE] opcode is used to set or query the
+** persistent "powersafe-overwrite" or "PSOW" setting.  The PSOW setting
+** determines the [SQLITE_IOCAP_POWERSAFE_OVERWRITE] bit of the
+** xDeviceCharacteristics methods. The fourth parameter to
+** [sqlite3_file_control()] for this opcode should be a pointer to an integer.
+** That integer is 0 to disable zero-damage mode or 1 to enable zero-damage
+** mode.  If the integer is -1, then it is overwritten with the current
+** zero-damage mode setting.
+**
+** <li>[[SQLITE_FCNTL_OVERWRITE]]
+** ^The [SQLITE_FCNTL_OVERWRITE] opcode is invoked by SQLite after opening
+** a write transaction to indicate that, unless it is rolled back for some
+** reason, the entire database file will be overwritten by the current 
+** transaction. This is used by VACUUM operations.
+**
+** <li>[[SQLITE_FCNTL_VFSNAME]]
+** ^The [SQLITE_FCNTL_VFSNAME] opcode can be used to obtain the names of
+** all [VFSes] in the VFS stack.  The names are of all VFS shims and the
+** final bottom-level VFS are written into memory obtained from 
+** [sqlite3_malloc()] and the result is stored in the char* variable
+** that the fourth parameter of [sqlite3_file_control()] points to.
+** The caller is responsible for freeing the memory when done.  As with
+** all file-control actions, there is no guarantee that this will actually
+** do anything.  Callers should initialize the char* variable to a NULL
+** pointer in case this file-control is not implemented.  This file-control
+** is intended for diagnostic use only.
+**
+** <li>[[SQLITE_FCNTL_PRAGMA]]
+** ^Whenever a [PRAGMA] statement is parsed, an [SQLITE_FCNTL_PRAGMA] 
+** file control is sent to the open [sqlite3_file] object corresponding
+** to the database file to which the pragma statement refers. ^The argument
+** to the [SQLITE_FCNTL_PRAGMA] file control is an array of
+** pointers to strings (char**) in which the second element of the array
+** is the name of the pragma and the third element is the argument to the
+** pragma or NULL if the pragma has no argument.  ^The handler for an
+** [SQLITE_FCNTL_PRAGMA] file control can optionally make the first element
+** of the char** argument point to a string obtained from [sqlite3_mprintf()]
+** or the equivalent and that string will become the result of the pragma or
+** the error message if the pragma fails. ^If the
+** [SQLITE_FCNTL_PRAGMA] file control returns [SQLITE_NOTFOUND], then normal 
+** [PRAGMA] processing continues.  ^If the [SQLITE_FCNTL_PRAGMA]
+** file control returns [SQLITE_OK], then the parser assumes that the
+** VFS has handled the PRAGMA itself and the parser generates a no-op
+** prepared statement.  ^If the [SQLITE_FCNTL_PRAGMA] file control returns
+** any result code other than [SQLITE_OK] or [SQLITE_NOTFOUND], that means
+** that the VFS encountered an error while handling the [PRAGMA] and the
+** compilation of the PRAGMA fails with an error.  ^The [SQLITE_FCNTL_PRAGMA]
+** file control occurs at the beginning of pragma statement analysis and so
+** it is able to override built-in [PRAGMA] statements.
+**
+** <li>[[SQLITE_FCNTL_BUSYHANDLER]]
+** ^The [SQLITE_FCNTL_BUSYHANDLER]
+** file-control may be invoked by SQLite on the database file handle
+** shortly after it is opened in order to provide a custom VFS with access
+** to the connections busy-handler callback. The argument is of type (void **)
+** - an array of two (void *) values. The first (void *) actually points
+** to a function of type (int (*)(void *)). In order to invoke the connections
+** busy-handler, this function should be invoked with the second (void *) in
+** the array as the only argument. If it returns non-zero, then the operation
+** should be retried. If it returns zero, the custom VFS should abandon the
+** current operation.
+**
+** <li>[[SQLITE_FCNTL_TEMPFILENAME]]
+** ^Application can invoke the [SQLITE_FCNTL_TEMPFILENAME] file-control
+** to have SQLite generate a
+** temporary filename using the same algorithm that is followed to generate
+** temporary filenames for TEMP tables and other internal uses.  The
+** argument should be a char** which will be filled with the filename
+** written into memory obtained from [sqlite3_malloc()].  The caller should
+** invoke [sqlite3_free()] on the result to avoid a memory leak.
+**
+** <li>[[SQLITE_FCNTL_MMAP_SIZE]]
+** The [SQLITE_FCNTL_MMAP_SIZE] file control is used to query or set the
+** maximum number of bytes that will be used for memory-mapped I/O.
+** The argument is a pointer to a value of type sqlite3_int64 that
+** is an advisory maximum number of bytes in the file to memory map.  The
+** pointer is overwritten with the old value.  The limit is not changed if
+** the value originally pointed to is negative, and so the current limit 
+** can be queried by passing in a pointer to a negative number.  This
+** file-control is used internally to implement [PRAGMA mmap_size].
+**
+** <li>[[SQLITE_FCNTL_TRACE]]
+** The [SQLITE_FCNTL_TRACE] file control provides advisory information
+** to the VFS about what the higher layers of the SQLite stack are doing.
+** This file control is used by some VFS activity tracing [shims].
+** The argument is a zero-terminated string.  Higher layers in the
+** SQLite stack may generate instances of this file control if
+** the [SQLITE_USE_FCNTL_TRACE] compile-time option is enabled.
+**
+** <li>[[SQLITE_FCNTL_HAS_MOVED]]
+** The [SQLITE_FCNTL_HAS_MOVED] file control interprets its argument as a
+** pointer to an integer and it writes a boolean into that integer depending
+** on whether or not the file has been renamed, moved, or deleted since it
+** was first opened.
+**
+** <li>[[SQLITE_FCNTL_WIN32_SET_HANDLE]]
+** The [SQLITE_FCNTL_WIN32_SET_HANDLE] opcode is used for debugging.  This
+** opcode causes the xFileControl method to swap the file handle with the one
+** pointed to by the pArg argument.  This capability is used during testing
+** and only needs to be supported when SQLITE_TEST is defined.
+**
+** </ul>
 */
-#define SQLITE_FCNTL_LOCKSTATE        1
-#define SQLITE_GET_LOCKPROXYFILE      2
-#define SQLITE_SET_LOCKPROXYFILE      3
-#define SQLITE_LAST_ERRNO             4
-#define SQLITE_FCNTL_SIZE_HINT        5
-#define SQLITE_FCNTL_CHUNK_SIZE       6
-#define SQLITE_FCNTL_FILE_POINTER     7
-#define SQLITE_FCNTL_SYNC_OMITTED     8
-
+#define SQLITE_FCNTL_LOCKSTATE               1
+#define SQLITE_GET_LOCKPROXYFILE             2
+#define SQLITE_SET_LOCKPROXYFILE             3
+#define SQLITE_LAST_ERRNO                    4
+#define SQLITE_FCNTL_SIZE_HINT               5
+#define SQLITE_FCNTL_CHUNK_SIZE              6
+#define SQLITE_FCNTL_FILE_POINTER            7
+#define SQLITE_FCNTL_SYNC_OMITTED            8
+#define SQLITE_FCNTL_WIN32_AV_RETRY          9
+#define SQLITE_FCNTL_PERSIST_WAL            10
+#define SQLITE_FCNTL_OVERWRITE              11
+#define SQLITE_FCNTL_VFSNAME                12
+#define SQLITE_FCNTL_POWERSAFE_OVERWRITE    13
+#define SQLITE_FCNTL_PRAGMA                 14
+#define SQLITE_FCNTL_BUSYHANDLER            15
+#define SQLITE_FCNTL_TEMPFILENAME           16
+#define SQLITE_FCNTL_MMAP_SIZE              18
+#define SQLITE_FCNTL_TRACE                  19
+#define SQLITE_FCNTL_HAS_MOVED              20
+#define SQLITE_FCNTL_SYNC                   21
+#define SQLITE_FCNTL_COMMIT_PHASETWO        22
+#define SQLITE_FCNTL_WIN32_SET_HANDLE       23
 
 /*
 ** CAPI3REF: Mutex Handle
 **
 ** The mutex module within SQLite defines [sqlite3_mutex] to be an
 ** abstract type for a mutex object.  The SQLite core never looks
 ** at the internal representation of an [sqlite3_mutex].  It only
 ** deals with pointers to the [sqlite3_mutex] object.
 **
 ** Mutexes are created using [sqlite3_mutex_alloc()].
 */
 typedef struct sqlite3_mutex sqlite3_mutex;
 
 /*
 ** CAPI3REF: OS Interface Object
 **
 ** An instance of the sqlite3_vfs object defines the interface between
 ** the SQLite core and the underlying operating system.  The "vfs"
-** in the name of the object stands for "virtual file system".
+** in the name of the object stands for "virtual file system".  See
+** the [VFS | VFS documentation] for further information.
 **
 ** The value of the iVersion field is initially 1 but may be larger in
 ** future versions of SQLite.  Additional fields may be appended to this
 ** object when the iVersion value is increased.  Note that the structure
 ** of the sqlite3_vfs object changes in the transaction between
 ** SQLite version 3.5.9 and 3.6.0 and yet the iVersion field was not
 ** modified.
 **
 ** The szOsFile field is the size of the subclassed [sqlite3_file]
 ** structure used by this VFS.  mxPathname is the maximum length of
 ** a pathname in this VFS.
 **
 ** Registered sqlite3_vfs objects are kept on a linked list formed by
 ** the pNext pointer.  The [sqlite3_vfs_register()]
 ** and [sqlite3_vfs_unregister()] interfaces manage this list
 ** in a thread-safe way.  The [sqlite3_vfs_find()] interface
 ** searches the list.  Neither the application code nor the VFS
 ** implementation should use the pNext pointer.
 **
 ** The pNext field is the only field in the sqlite3_vfs
 ** structure that SQLite will ever modify.  SQLite will only access
 ** or modify this field while holding a particular static mutex.
 ** The application should never modify anything within the sqlite3_vfs
 ** object once the object has been registered.
 **
 ** The zName field holds the name of the VFS module.  The name must
 ** be unique across all VFS modules.
 **
+** [[sqlite3_vfs.xOpen]]
 ** ^SQLite guarantees that the zFilename parameter to xOpen
 ** is either a NULL pointer or string obtained
 ** from xFullPathname() with an optional suffix added.
 ** ^If a suffix is added to the zFilename parameter, it will
 ** consist of a single "-" character followed by no more than
-** 10 alphanumeric and/or "-" characters.
+** 11 alphanumeric and/or "-" characters.
 ** ^SQLite further guarantees that
 ** the string will be valid and unchanged until xClose() is
 ** called. Because of the previous sentence,
 ** the [sqlite3_file] can safely store a pointer to the
 ** filename if it needs to remember the filename for some reason.
 ** If the zFilename parameter to xOpen is a NULL pointer then xOpen
 ** must invent its own temporary name for the file.  ^Whenever the 
 ** xFilename parameter is NULL it will also be the case that the
 ** flags parameter will include [SQLITE_OPEN_DELETEONCLOSE].
 **
@@ skipping 51 matching lines @@
 ** ^At least szOsFile bytes of memory are allocated by SQLite
 ** to hold the  [sqlite3_file] structure passed as the third
 ** argument to xOpen.  The xOpen method does not have to
 ** allocate the structure; it should just fill it in.  Note that
 ** the xOpen method must set the sqlite3_file.pMethods to either
 ** a valid [sqlite3_io_methods] object or to NULL.  xOpen must do
 ** this even if the open fails.  SQLite expects that the sqlite3_file.pMethods
 ** element will be valid after xOpen returns regardless of the success
 ** or failure of the xOpen call.
 **
+** [[sqlite3_vfs.xAccess]]
 ** ^The flags argument to xAccess() may be [SQLITE_ACCESS_EXISTS]
 ** to test for the existence of a file, or [SQLITE_ACCESS_READWRITE] to
 ** test whether a file is readable and writable, or [SQLITE_ACCESS_READ]
 ** to test whether a file is at least readable.   The file can be a
 ** directory.
 **
 ** ^SQLite will always allocate at least mxPathname+1 bytes for the
 ** output buffer xFullPathname.  The exact size of the output buffer
 ** is also passed as a parameter to both  methods. If the output buffer
 ** is not large enough, [SQLITE_CANTOPEN] should be returned. Since this is
 ** handled as a fatal error by SQLite, vfs implementations should endeavor
 ** to prevent this by setting mxPathname to a sufficiently large value.
 **
 ** The xRandomness(), xSleep(), xCurrentTime(), and xCurrentTimeInt64()
 ** interfaces are not strictly a part of the filesystem, but they are
 ** included in the VFS structure for completeness.
 ** The xRandomness() function attempts to return nBytes bytes
 ** of good-quality randomness into zOut.  The return value is
 ** the actual number of bytes of randomness obtained.
 ** The xSleep() method causes the calling thread to sleep for at
 ** least the number of microseconds given.  ^The xCurrentTime()
 ** method returns a Julian Day Number for the current date and time as
 ** a floating point value.
 ** ^The xCurrentTimeInt64() method returns, as an integer, the Julian
-** Day Number multipled by 86400000 (the number of milliseconds in 
+** Day Number multiplied by 86400000 (the number of milliseconds in 
 ** a 24-hour day).  
 ** ^SQLite will use the xCurrentTimeInt64() method to get the current
 ** date and time if that method is available (if iVersion is 2 or 
 ** greater and the function pointer is not NULL) and will fall back
 ** to xCurrentTime() if xCurrentTimeInt64() is unavailable.
 **
 ** ^The xSetSystemCall(), xGetSystemCall(), and xNestSystemCall() interfaces
 ** are not used by the SQLite core.  These optional interfaces are provided
 ** by some VFSes to facilitate testing of the VFS code. By overriding 
 ** system calls with functions under its control, a test program can
@@ skipping 201 matching lines @@
 ** must insure that no other SQLite interfaces are invoked by other
 ** threads while sqlite3_config() is running.  Furthermore, sqlite3_config()
 ** may only be invoked prior to library initialization using
 ** [sqlite3_initialize()] or after shutdown by [sqlite3_shutdown()].
 ** ^If sqlite3_config() is called after [sqlite3_initialize()] and before
 ** [sqlite3_shutdown()] then it will return SQLITE_MISUSE.
 ** Note, however, that ^sqlite3_config() can be called as part of the
 ** implementation of an application-defined [sqlite3_os_init()].
 **
 ** The first argument to sqlite3_config() is an integer
-** [SQLITE_CONFIG_SINGLETHREAD | configuration option] that determines
+** [configuration option] that determines
 ** what property of SQLite is to be configured.  Subsequent arguments
-** vary depending on the [SQLITE_CONFIG_SINGLETHREAD | configuration option]
+** vary depending on the [configuration option]
 ** in the first argument.
 **
 ** ^When a configuration option is set, sqlite3_config() returns [SQLITE_OK].
 ** ^If the option is unknown or SQLite is unable to set the option
 ** then this routine returns a non-zero [error code].
 */
 SQLITE_API int sqlite3_config(int, ...);
 
 /*
 ** CAPI3REF: Configure database connections
@@ skipping 31 matching lines @@
 **
 ** Note that SQLite comes with several [built-in memory allocators]
 ** that are perfectly adequate for the overwhelming majority of applications
 ** and that this object is only useful to a tiny minority of applications
 ** with specialized memory allocation requirements.  This object is
 ** also used during testing of SQLite in order to specify an alternative
 ** memory allocator that simulates memory out-of-memory conditions in
 ** order to verify that SQLite recovers gracefully from such
 ** conditions.
 **
-** The xMalloc and xFree methods must work like the
-** malloc() and free() functions from the standard C library.
-** The xRealloc method must work like realloc() from the standard C library
-** with the exception that if the second argument to xRealloc is zero,
-** xRealloc must be a no-op - it must not perform any allocation or
-** deallocation.  ^SQLite guarantees that the second argument to
+** The xMalloc, xRealloc, and xFree methods must work like the
+** malloc(), realloc() and free() functions from the standard C library.
+** ^SQLite guarantees that the second argument to
 ** xRealloc is always a value returned by a prior call to xRoundup.
-** And so in cases where xRoundup always returns a positive number,
-** xRealloc can perform exactly as the standard library realloc() and
-** still be in compliance with this specification.
 **
 ** xSize should return the allocated size of a memory allocation
 ** previously obtained from xMalloc or xRealloc.  The allocated size
 ** is always at least as big as the requested size but may be larger.
 **
 ** The xRoundup method returns what would be the allocated size of
 ** a memory allocation given a particular requested size.  Most memory
 ** allocators round up memory allocations at least to the next multiple
 ** of 8.  Some allocators round up to a larger multiple or to a power of 2.
 ** Every memory allocation request coming in through [sqlite3_malloc()]
 ** or [sqlite3_realloc()] first calls xRoundup.  If xRoundup returns 0, 
 ** that causes the corresponding memory allocation to fail.
 **
-** The xInit method initializes the memory allocator.  (For example,
+** The xInit method initializes the memory allocator.  For example,
 ** it might allocate any require mutexes or initialize internal data
 ** structures.  The xShutdown method is invoked (indirectly) by
 ** [sqlite3_shutdown()] and should deallocate any resources acquired
 ** by xInit.  The pAppData pointer is used as the only parameter to
 ** xInit and xShutdown.
 **
 ** SQLite holds the [SQLITE_MUTEX_STATIC_MASTER] mutex when it invokes
 ** the xInit method, so the xInit method need not be threadsafe.  The
 ** xShutdown method is only called from [sqlite3_shutdown()] so it does
 ** not need to be threadsafe either.  For all other methods, SQLite
@@ skipping 14 matching lines @@
   void *(*xRealloc)(void*,int);  /* Resize an allocation */
   int (*xSize)(void*);           /* Return the size of an allocation */
   int (*xRoundup)(int);          /* Round up request size to allocation size */
   int (*xInit)(void*);           /* Initialize the memory allocator */
   void (*xShutdown)(void*);      /* Deinitialize the memory allocator */
   void *pAppData;                /* Argument to xInit() and xShutdown() */
 };
 
 /*
 ** CAPI3REF: Configuration Options
+** KEYWORDS: {configuration option}
 **
 ** These constants are the available integer configuration options that
 ** can be passed as the first argument to the [sqlite3_config()] interface.
 **
 ** New configuration options may be added in future releases of SQLite.
 ** Existing configuration options might be discontinued.  Applications
 ** should check the return code from [sqlite3_config()] to make sure that
 ** the call worked.  The [sqlite3_config()] interface will return a
 ** non-zero [error code] if a discontinued or unsupported configuration option
 ** is invoked.
 **
 ** <dl>
-** <dt>SQLITE_CONFIG_SINGLETHREAD</dt>
+** [[SQLITE_CONFIG_SINGLETHREAD]] <dt>SQLITE_CONFIG_SINGLETHREAD</dt>
 ** <dd>There are no arguments to this option.  ^This option sets the
 ** [threading mode] to Single-thread.  In other words, it disables
 ** all mutexing and puts SQLite into a mode where it can only be used
 ** by a single thread.   ^If SQLite is compiled with
 ** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
 ** it is not possible to change the [threading mode] from its default
 ** value of Single-thread and so [sqlite3_config()] will return 
 ** [SQLITE_ERROR] if called with the SQLITE_CONFIG_SINGLETHREAD
 ** configuration option.</dd>
 **
-** <dt>SQLITE_CONFIG_MULTITHREAD</dt>
+** [[SQLITE_CONFIG_MULTITHREAD]] <dt>SQLITE_CONFIG_MULTITHREAD</dt>
 ** <dd>There are no arguments to this option.  ^This option sets the
 ** [threading mode] to Multi-thread.  In other words, it disables
 ** mutexing on [database connection] and [prepared statement] objects.
 ** The application is responsible for serializing access to
 ** [database connections] and [prepared statements].  But other mutexes
 ** are enabled so that SQLite will be safe to use in a multi-threaded
 ** environment as long as no two threads attempt to use the same
 ** [database connection] at the same time.  ^If SQLite is compiled with
 ** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
 ** it is not possible to set the Multi-thread [threading mode] and
 ** [sqlite3_config()] will return [SQLITE_ERROR] if called with the
 ** SQLITE_CONFIG_MULTITHREAD configuration option.</dd>
 **
-** <dt>SQLITE_CONFIG_SERIALIZED</dt>
+** [[SQLITE_CONFIG_SERIALIZED]] <dt>SQLITE_CONFIG_SERIALIZED</dt>
 ** <dd>There are no arguments to this option.  ^This option sets the
 ** [threading mode] to Serialized. In other words, this option enables
 ** all mutexes including the recursive
 ** mutexes on [database connection] and [prepared statement] objects.
 ** In this mode (which is the default when SQLite is compiled with
 ** [SQLITE_THREADSAFE=1]) the SQLite library will itself serialize access
 ** to [database connections] and [prepared statements] so that the
 ** application is free to use the same [database connection] or the
 ** same [prepared statement] in different threads at the same time.
 ** ^If SQLite is compiled with
 ** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
 ** it is not possible to set the Serialized [threading mode] and
 ** [sqlite3_config()] will return [SQLITE_ERROR] if called with the
 ** SQLITE_CONFIG_SERIALIZED configuration option.</dd>
 **
-** <dt>SQLITE_CONFIG_MALLOC</dt>
+** [[SQLITE_CONFIG_MALLOC]] <dt>SQLITE_CONFIG_MALLOC</dt>
 ** <dd> ^(This option takes a single argument which is a pointer to an
 ** instance of the [sqlite3_mem_methods] structure.  The argument specifies
 ** alternative low-level memory allocation routines to be used in place of
 ** the memory allocation routines built into SQLite.)^ ^SQLite makes
 ** its own private copy of the content of the [sqlite3_mem_methods] structure
 ** before the [sqlite3_config()] call returns.</dd>
 **
-** <dt>SQLITE_CONFIG_GETMALLOC</dt>
+** [[SQLITE_CONFIG_GETMALLOC]] <dt>SQLITE_CONFIG_GETMALLOC</dt>
 ** <dd> ^(This option takes a single argument which is a pointer to an
 ** instance of the [sqlite3_mem_methods] structure.  The [sqlite3_mem_methods]
 ** structure is filled with the currently defined memory allocation routines.)^
 ** This option can be used to overload the default memory allocation
 ** routines with a wrapper that simulations memory allocation failure or
 ** tracks memory usage, for example. </dd>
 **
-** <dt>SQLITE_CONFIG_MEMSTATUS</dt>
+** [[SQLITE_CONFIG_MEMSTATUS]] <dt>SQLITE_CONFIG_MEMSTATUS</dt>
 ** <dd> ^This option takes single argument of type int, interpreted as a 
 ** boolean, which enables or disables the collection of memory allocation 
 ** statistics. ^(When memory allocation statistics are disabled, the 
 ** following SQLite interfaces become non-operational:
 **   <ul>
 **   <li> [sqlite3_memory_used()]
 **   <li> [sqlite3_memory_highwater()]
 **   <li> [sqlite3_soft_heap_limit64()]
 **   <li> [sqlite3_status()]
 **   </ul>)^
 ** ^Memory allocation statistics are enabled by default unless SQLite is
 ** compiled with [SQLITE_DEFAULT_MEMSTATUS]=0 in which case memory
 ** allocation statistics are disabled by default.
 ** </dd>
 **
-** <dt>SQLITE_CONFIG_SCRATCH</dt>
+** [[SQLITE_CONFIG_SCRATCH]] <dt>SQLITE_CONFIG_SCRATCH</dt>
 ** <dd> ^This option specifies a static memory buffer that SQLite can use for
 ** scratch memory.  There are three arguments:  A pointer an 8-byte
 ** aligned memory buffer from which the scratch allocations will be
 ** drawn, the size of each scratch allocation (sz),
 ** and the maximum number of scratch allocations (N).  The sz
 ** argument must be a multiple of 16.
 ** The first argument must be a pointer to an 8-byte aligned buffer
 ** of at least sz*N bytes of memory.
 ** ^SQLite will use no more than two scratch buffers per thread.  So
 ** N should be set to twice the expected maximum number of threads.
 ** ^SQLite will never require a scratch buffer that is more than 6
 ** times the database page size. ^If SQLite needs needs additional
 ** scratch memory beyond what is provided by this configuration option, then 
 ** [sqlite3_malloc()] will be used to obtain the memory needed.</dd>
 **
-** <dt>SQLITE_CONFIG_PAGECACHE</dt>
+** [[SQLITE_CONFIG_PAGECACHE]] <dt>SQLITE_CONFIG_PAGECACHE</dt>
 ** <dd> ^This option specifies a static memory buffer that SQLite can use for
-** the database page cache with the default page cache implemenation.  
+** the database page cache with the default page cache implementation.  
 ** This configuration should not be used if an application-define page
-** cache implementation is loaded using the SQLITE_CONFIG_PCACHE option.
+** cache implementation is loaded using the SQLITE_CONFIG_PCACHE2 option.
 ** There are three arguments to this option: A pointer to 8-byte aligned
 ** memory, the size of each page buffer (sz), and the number of pages (N).
 ** The sz argument should be the size of the largest database page
 ** (a power of two between 512 and 32768) plus a little extra for each
 ** page header.  ^The page header size is 20 to 40 bytes depending on
 ** the host architecture.  ^It is harmless, apart from the wasted memory,
 ** to make sz a little too large.  The first
 ** argument should point to an allocation of at least sz*N bytes of memory.
 ** ^SQLite will use the memory provided by the first argument to satisfy its
 ** memory needs for the first N pages that it adds to cache.  ^If additional
 ** page cache memory is needed beyond what is provided by this option, then
 ** SQLite goes to [sqlite3_malloc()] for the additional storage space.
 ** The pointer in the first argument must
 ** be aligned to an 8-byte boundary or subsequent behavior of SQLite
 ** will be undefined.</dd>
 **
-** <dt>SQLITE_CONFIG_HEAP</dt>
+** [[SQLITE_CONFIG_HEAP]] <dt>SQLITE_CONFIG_HEAP</dt>
 ** <dd> ^This option specifies a static memory buffer that SQLite will use
 ** for all of its dynamic memory allocation needs beyond those provided
 ** for by [SQLITE_CONFIG_SCRATCH] and [SQLITE_CONFIG_PAGECACHE].
 ** There are three arguments: An 8-byte aligned pointer to the memory,
 ** the number of bytes in the memory buffer, and the minimum allocation size.
 ** ^If the first pointer (the memory pointer) is NULL, then SQLite reverts
 ** to using its default memory allocator (the system malloc() implementation),
 ** undoing any prior invocation of [SQLITE_CONFIG_MALLOC].  ^If the
 ** memory pointer is not NULL and either [SQLITE_ENABLE_MEMSYS3] or
 ** [SQLITE_ENABLE_MEMSYS5] are defined, then the alternative memory
 ** allocator is engaged to handle all of SQLites memory allocation needs.
 ** The first pointer (the memory pointer) must be aligned to an 8-byte
 ** boundary or subsequent behavior of SQLite will be undefined.
-** The minimum allocation size is capped at 2^12. Reasonable values
-** for the minimum allocation size are 2^5 through 2^8.</dd>
+** The minimum allocation size is capped at 2**12. Reasonable values
+** for the minimum allocation size are 2**5 through 2**8.</dd>
 **
-** <dt>SQLITE_CONFIG_MUTEX</dt>
+** [[SQLITE_CONFIG_MUTEX]] <dt>SQLITE_CONFIG_MUTEX</dt>
 ** <dd> ^(This option takes a single argument which is a pointer to an
 ** instance of the [sqlite3_mutex_methods] structure.  The argument specifies
 ** alternative low-level mutex routines to be used in place
 ** the mutex routines built into SQLite.)^  ^SQLite makes a copy of the
 ** content of the [sqlite3_mutex_methods] structure before the call to
 ** [sqlite3_config()] returns. ^If SQLite is compiled with
 ** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
 ** the entire mutexing subsystem is omitted from the build and hence calls to
 ** [sqlite3_config()] with the SQLITE_CONFIG_MUTEX configuration option will
 ** return [SQLITE_ERROR].</dd>
 **
-** <dt>SQLITE_CONFIG_GETMUTEX</dt>
+** [[SQLITE_CONFIG_GETMUTEX]] <dt>SQLITE_CONFIG_GETMUTEX</dt>
 ** <dd> ^(This option takes a single argument which is a pointer to an
 ** instance of the [sqlite3_mutex_methods] structure.  The
 ** [sqlite3_mutex_methods]
 ** structure is filled with the currently defined mutex routines.)^
 ** This option can be used to overload the default mutex allocation
 ** routines with a wrapper used to track mutex usage for performance
 ** profiling or testing, for example.   ^If SQLite is compiled with
 ** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
 ** the entire mutexing subsystem is omitted from the build and hence calls to
 ** [sqlite3_config()] with the SQLITE_CONFIG_GETMUTEX configuration option will
 ** return [SQLITE_ERROR].</dd>
 **
-** <dt>SQLITE_CONFIG_LOOKASIDE</dt>
+** [[SQLITE_CONFIG_LOOKASIDE]] <dt>SQLITE_CONFIG_LOOKASIDE</dt>
 ** <dd> ^(This option takes two arguments that determine the default
 ** memory allocation for the lookaside memory allocator on each
 ** [database connection].  The first argument is the
 ** size of each lookaside buffer slot and the second is the number of
 ** slots allocated to each database connection.)^  ^(This option sets the
 ** <i>default</i> lookaside size. The [SQLITE_DBCONFIG_LOOKASIDE]
 ** verb to [sqlite3_db_config()] can be used to change the lookaside
 ** configuration on individual connections.)^ </dd>
 **
-** <dt>SQLITE_CONFIG_PCACHE</dt>
+** [[SQLITE_CONFIG_PCACHE2]] <dt>SQLITE_CONFIG_PCACHE2</dt>
 ** <dd> ^(This option takes a single argument which is a pointer to
-** an [sqlite3_pcache_methods] object.  This object specifies the interface
+** an [sqlite3_pcache_methods2] object.  This object specifies the interface
 ** to a custom page cache implementation.)^  ^SQLite makes a copy of the
 ** object and uses it for page cache memory allocations.</dd>
 **
-** <dt>SQLITE_CONFIG_GETPCACHE</dt>
+** [[SQLITE_CONFIG_GETPCACHE2]] <dt>SQLITE_CONFIG_GETPCACHE2</dt>
 ** <dd> ^(This option takes a single argument which is a pointer to an
-** [sqlite3_pcache_methods] object.  SQLite copies of the current
+** [sqlite3_pcache_methods2] object.  SQLite copies of the current
 ** page cache implementation into that object.)^ </dd>
 **
-** <dt>SQLITE_CONFIG_LOG</dt>
-** <dd> ^The SQLITE_CONFIG_LOG option takes two arguments: a pointer to a
+** [[SQLITE_CONFIG_LOG]] <dt>SQLITE_CONFIG_LOG</dt>
+** <dd> The SQLITE_CONFIG_LOG option is used to configure the SQLite
+** global [error log].
+** (^The SQLITE_CONFIG_LOG option takes two arguments: a pointer to a
 ** function with a call signature of void(*)(void*,int,const char*), 
 ** and a pointer to void. ^If the function pointer is not NULL, it is
 ** invoked by [sqlite3_log()] to process each logging event.  ^If the
 ** function pointer is NULL, the [sqlite3_log()] interface becomes a no-op.
 ** ^The void pointer that is the second argument to SQLITE_CONFIG_LOG is
 ** passed through as the first parameter to the application-defined logger
 ** function whenever that function is invoked.  ^The second parameter to
 ** the logger function is a copy of the first parameter to the corresponding
 ** [sqlite3_log()] call and is intended to be a [result code] or an
 ** [extended result code].  ^The third parameter passed to the logger is
 ** log message after formatting via [sqlite3_snprintf()].
 ** The SQLite logging interface is not reentrant; the logger function
 ** supplied by the application must not invoke any SQLite interface.
 ** In a multi-threaded application, the application-defined logger
 ** function must be threadsafe. </dd>
 **
+** [[SQLITE_CONFIG_URI]] <dt>SQLITE_CONFIG_URI
+** <dd>^(This option takes a single argument of type int. If non-zero, then
+** URI handling is globally enabled. If the parameter is zero, then URI handling
+** is globally disabled.)^ ^If URI handling is globally enabled, all filenames
+** passed to [sqlite3_open()], [sqlite3_open_v2()], [sqlite3_open16()] or
+** specified as part of [ATTACH] commands are interpreted as URIs, regardless
+** of whether or not the [SQLITE_OPEN_URI] flag is set when the database
+** connection is opened. ^If it is globally disabled, filenames are
+** only interpreted as URIs if the SQLITE_OPEN_URI flag is set when the
+** database connection is opened. ^(By default, URI handling is globally
+** disabled. The default value may be changed by compiling with the
+** [SQLITE_USE_URI] symbol defined.)^
+**
+** [[SQLITE_CONFIG_COVERING_INDEX_SCAN]] <dt>SQLITE_CONFIG_COVERING_INDEX_SCAN
+** <dd>^This option takes a single integer argument which is interpreted as
+** a boolean in order to enable or disable the use of covering indices for
+** full table scans in the query optimizer.  ^The default setting is determined
+** by the [SQLITE_ALLOW_COVERING_INDEX_SCAN] compile-time option, or is "on"
+** if that compile-time option is omitted.
+** The ability to disable the use of covering indices for full table scans
+** is because some incorrectly coded legacy applications might malfunction
+** when the optimization is enabled.  Providing the ability to
+** disable the optimization allows the older, buggy application code to work
+** without change even with newer versions of SQLite.
+**
+** [[SQLITE_CONFIG_PCACHE]] [[SQLITE_CONFIG_GETPCACHE]]
+** <dt>SQLITE_CONFIG_PCACHE and SQLITE_CONFIG_GETPCACHE
+** <dd> These options are obsolete and should not be used by new code.
+** They are retained for backwards compatibility but are now no-ops.
+** </dd>
+**
+** [[SQLITE_CONFIG_SQLLOG]]
+** <dt>SQLITE_CONFIG_SQLLOG
+** <dd>This option is only available if sqlite is compiled with the
+** [SQLITE_ENABLE_SQLLOG] pre-processor macro defined. The first argument should
+** be a pointer to a function of type void(*)(void*,sqlite3*,const char*, int).
+** The second should be of type (void*). The callback is invoked by the library
+** in three separate circumstances, identified by the value passed as the
+** fourth parameter. If the fourth parameter is 0, then the database connection
+** passed as the second argument has just been opened. The third argument
+** points to a buffer containing the name of the main database file. If the
+** fourth parameter is 1, then the SQL statement that the third parameter
+** points to has just been executed. Or, if the fourth parameter is 2, then
+** the connection being passed as the second parameter is being closed. The
+** third parameter is passed NULL In this case.  An example of using this
+** configuration option can be seen in the "test_sqllog.c" source file in
+** the canonical SQLite source tree.</dd>
+**
+** [[SQLITE_CONFIG_MMAP_SIZE]]
+** <dt>SQLITE_CONFIG_MMAP_SIZE
+** <dd>^SQLITE_CONFIG_MMAP_SIZE takes two 64-bit integer (sqlite3_int64) values
+** that are the default mmap size limit (the default setting for
+** [PRAGMA mmap_size]) and the maximum allowed mmap size limit.
+** ^The default setting can be overridden by each database connection using
+** either the [PRAGMA mmap_size] command, or by using the
+** [SQLITE_FCNTL_MMAP_SIZE] file control.  ^(The maximum allowed mmap size
+** cannot be changed at run-time.  Nor may the maximum allowed mmap size
+** exceed the compile-time maximum mmap size set by the
+** [SQLITE_MAX_MMAP_SIZE] compile-time option.)^
+** ^If either argument to this option is negative, then that argument is
+** changed to its compile-time default.
+**
+** [[SQLITE_CONFIG_WIN32_HEAPSIZE]]
+** <dt>SQLITE_CONFIG_WIN32_HEAPSIZE
+** <dd>^This option is only available if SQLite is compiled for Windows
+** with the [SQLITE_WIN32_MALLOC] pre-processor macro defined.
+** SQLITE_CONFIG_WIN32_HEAPSIZE takes a 32-bit unsigned integer value
+** that specifies the maximum size of the created heap.
 ** </dl>
 */
 #define SQLITE_CONFIG_SINGLETHREAD  1  /* nil */
 #define SQLITE_CONFIG_MULTITHREAD   2  /* nil */
 #define SQLITE_CONFIG_SERIALIZED    3  /* nil */
 #define SQLITE_CONFIG_MALLOC        4  /* sqlite3_mem_methods* */
 #define SQLITE_CONFIG_GETMALLOC     5  /* sqlite3_mem_methods* */
 #define SQLITE_CONFIG_SCRATCH       6  /* void*, int sz, int N */
 #define SQLITE_CONFIG_PAGECACHE     7  /* void*, int sz, int N */
 #define SQLITE_CONFIG_HEAP          8  /* void*, int nByte, int min */
 #define SQLITE_CONFIG_MEMSTATUS     9  /* boolean */
 #define SQLITE_CONFIG_MUTEX        10  /* sqlite3_mutex_methods* */
 #define SQLITE_CONFIG_GETMUTEX     11  /* sqlite3_mutex_methods* */
 /* previously SQLITE_CONFIG_CHUNKALLOC 12 which is now unused. */ 
 #define SQLITE_CONFIG_LOOKASIDE    13  /* int int */
-#define SQLITE_CONFIG_PCACHE       14  /* sqlite3_pcache_methods* */
-#define SQLITE_CONFIG_GETPCACHE    15  /* sqlite3_pcache_methods* */
+#define SQLITE_CONFIG_PCACHE       14  /* no-op */
+#define SQLITE_CONFIG_GETPCACHE    15  /* no-op */
 #define SQLITE_CONFIG_LOG          16  /* xFunc, void* */
+#define SQLITE_CONFIG_URI          17  /* int */
+#define SQLITE_CONFIG_PCACHE2      18  /* sqlite3_pcache_methods2* */
+#define SQLITE_CONFIG_GETPCACHE2   19  /* sqlite3_pcache_methods2* */
+#define SQLITE_CONFIG_COVERING_INDEX_SCAN 20  /* int */
+#define SQLITE_CONFIG_SQLLOG       21  /* xSqllog, void* */
+#define SQLITE_CONFIG_MMAP_SIZE    22  /* sqlite3_int64, sqlite3_int64 */
+#define SQLITE_CONFIG_WIN32_HEAPSIZE      23  /* int nByte */
 
 /*
 ** CAPI3REF: Database Connection Configuration Options
 **
 ** These constants are the available integer configuration options that
 ** can be passed as the second argument to the [sqlite3_db_config()] interface.
 **
 ** New configuration options may be added in future releases of SQLite.
 ** Existing configuration options might be discontinued.  Applications
 ** should check the return code from [sqlite3_db_config()] to make sure that
@@ skipping 56 matching lines @@
 **
 ** ^The sqlite3_extended_result_codes() routine enables or disables the
 ** [extended result codes] feature of SQLite. ^The extended result
 ** codes are disabled by default for historical compatibility.
 */
 SQLITE_API int sqlite3_extended_result_codes(sqlite3*, int onoff);
 
 /*
 ** CAPI3REF: Last Insert Rowid
 **
-** ^Each entry in an SQLite table has a unique 64-bit signed
+** ^Each entry in most SQLite tables (except for [WITHOUT ROWID] tables)
+** has a unique 64-bit signed
 ** integer key called the [ROWID | "rowid"]. ^The rowid is always available
 ** as an undeclared column named ROWID, OID, or _ROWID_ as long as those
 ** names are not also used by explicitly declared columns. ^If
 ** the table has a column of type [INTEGER PRIMARY KEY] then that column
 ** is another alias for the rowid.
 **
-** ^This routine returns the [rowid] of the most recent
-** successful [INSERT] into the database from the [database connection]
-** in the first argument.  ^If no successful [INSERT]s
-** have ever occurred on that database connection, zero is returned.
+** ^The sqlite3_last_insert_rowid(D) interface returns the [rowid] of the 
+** most recent successful [INSERT] into a rowid table or [virtual table]
+** on database connection D.
+** ^Inserts into [WITHOUT ROWID] tables are not recorded.
+** ^If no successful [INSERT]s into rowid tables
+** have ever occurred on the database connection D, 
+** then sqlite3_last_insert_rowid(D) returns zero.
 **
-** ^(If an [INSERT] occurs within a trigger, then the [rowid] of the inserted
-** row is returned by this routine as long as the trigger is running.
-** But once the trigger terminates, the value returned by this routine
-** reverts to the last value inserted before the trigger fired.)^
+** ^(If an [INSERT] occurs within a trigger or within a [virtual table]
+** method, then this routine will return the [rowid] of the inserted
+** row as long as the trigger or virtual table method is running.
+** But once the trigger or virtual table method ends, the value returned 
+** by this routine reverts to what it was before the trigger or virtual
+** table method began.)^
 **
 ** ^An [INSERT] that fails due to a constraint violation is not a
 ** successful [INSERT] and does not change the value returned by this
 ** routine.  ^Thus INSERT OR FAIL, INSERT OR IGNORE, INSERT OR ROLLBACK,
 ** and INSERT OR ABORT make no changes to the return value of this
 ** routine when their insertion fails.  ^(When INSERT OR REPLACE
 ** encounters a constraint violation, it does not fail.  The
 ** INSERT continues to completion after deleting rows that caused
 ** the constraint problem so INSERT OR REPLACE will always change
 ** the return value of this interface.)^
@@ skipping 164 matching lines @@
 **
 ** The input to [sqlite3_complete16()] must be a zero-terminated
 ** UTF-16 string in native byte order.
 */
 SQLITE_API int sqlite3_complete(const char *sql);
 SQLITE_API int sqlite3_complete16(const void *sql);
 
 /*
 ** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors
 **
-** ^This routine sets a callback function that might be invoked whenever
-** an attempt is made to open a database table that another thread
-** or process has locked.
+** ^The sqlite3_busy_handler(D,X,P) routine sets a callback function X
+** that might be invoked with argument P whenever
+** an attempt is made to access a database table associated with
+** [database connection] D when another thread
+** or process has the table locked.
+** The sqlite3_busy_handler() interface is used to implement
+** [sqlite3_busy_timeout()] and [PRAGMA busy_timeout].
 **
-** ^If the busy callback is NULL, then [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED]
+** ^If the busy callback is NULL, then [SQLITE_BUSY]
 ** is returned immediately upon encountering the lock.  ^If the busy callback
 ** is not NULL, then the callback might be invoked with two arguments.
 **
 ** ^The first argument to the busy handler is a copy of the void* pointer which
 ** is the third argument to sqlite3_busy_handler().  ^The second argument to
 ** the busy handler callback is the number of times that the busy handler has
-** been invoked for this locking event.  ^If the
+** been invoked for the same locking event.  ^If the
 ** busy callback returns 0, then no additional attempts are made to
-** access the database and [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED] is returned.
+** access the database and [SQLITE_BUSY] is returned
+** to the application.
 ** ^If the callback returns non-zero, then another attempt
-** is made to open the database for reading and the cycle repeats.
+** is made to access the database and the cycle repeats.
 **
 ** The presence of a busy handler does not guarantee that it will be invoked
 ** when there is lock contention. ^If SQLite determines that invoking the busy
 ** handler could result in a deadlock, it will go ahead and return [SQLITE_BUSY]
-** or [SQLITE_IOERR_BLOCKED] instead of invoking the busy handler.
+** to the application instead of invoking the 
+** busy handler.
 ** Consider a scenario where one process is holding a read lock that
 ** it is trying to promote to a reserved lock and
 ** a second process is holding a reserved lock that it is trying
 ** to promote to an exclusive lock.  The first process cannot proceed
 ** because it is blocked by the second and the second process cannot
 ** proceed because it is blocked by the first.  If both processes
 ** invoke the busy handlers, neither will make any progress.  Therefore,
 ** SQLite returns [SQLITE_BUSY] for the first process, hoping that this
 ** will induce the first process to release its read lock and allow
 ** the second process to proceed.
 **
 ** ^The default busy callback is NULL.
 **
-** ^The [SQLITE_BUSY] error is converted to [SQLITE_IOERR_BLOCKED]
-** when SQLite is in the middle of a large transaction where all the
-** changes will not fit into the in-memory cache.  SQLite will
-** already hold a RESERVED lock on the database file, but it needs
-** to promote this lock to EXCLUSIVE so that it can spill cache
-** pages into the database file without harm to concurrent
-** readers.  ^If it is unable to promote the lock, then the in-memory
-** cache will be left in an inconsistent state and so the error
-** code is promoted from the relatively benign [SQLITE_BUSY] to
-** the more severe [SQLITE_IOERR_BLOCKED].  ^This error code promotion
-** forces an automatic rollback of the changes.  See the
-** <a href="/cvstrac/wiki?p=CorruptionFollowingBusyError">
-** CorruptionFollowingBusyError</a> wiki page for a discussion of why
-** this is important.
-**
 ** ^(There can only be a single busy handler defined for each
 ** [database connection].  Setting a new busy handler clears any
 ** previously set handler.)^  ^Note that calling [sqlite3_busy_timeout()]
-** will also set or clear the busy handler.
+** or evaluating [PRAGMA busy_timeout=N] will change the
+** busy handler and thus clear any previously set busy handler.
 **
 ** The busy callback should not take any actions which modify the
-** database connection that invoked the busy handler.  Any such actions
+** database connection that invoked the busy handler.  In other words,
+** the busy handler is not reentrant.  Any such actions
 ** result in undefined behavior.
 ** 
 ** A busy handler must not close the database connection
 ** or [prepared statement] that invoked the busy handler.
 */
 SQLITE_API int sqlite3_busy_handler(sqlite3*, int(*)(void*,int), void*);
 
 /*
 ** CAPI3REF: Set A Busy Timeout
 **
 ** ^This routine sets a [sqlite3_busy_handler | busy handler] that sleeps
 ** for a specified amount of time when a table is locked.  ^The handler
 ** will sleep multiple times until at least "ms" milliseconds of sleeping
 ** have accumulated.  ^After at least "ms" milliseconds of sleeping,
 ** the handler returns 0 which causes [sqlite3_step()] to return
-** [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED].
+** [SQLITE_BUSY].
 **
 ** ^Calling this routine with an argument less than or equal to zero
 ** turns off all busy handlers.
 **
 ** ^(There can only be a single busy handler for a particular
-** [database connection] any any given moment.  If another busy handler
+** [database connection] at any given moment.  If another busy handler
 ** was defined  (using [sqlite3_busy_handler()]) prior to calling
 ** this routine, that other busy handler is cleared.)^
+**
+** See also:  [PRAGMA busy_timeout]
 */
 SQLITE_API int sqlite3_busy_timeout(sqlite3*, int ms);
 
 /*
 ** CAPI3REF: Convenience Routines For Running Queries
 **
 ** This is a legacy interface that is preserved for backwards compatibility.
 ** Use of this interface is not recommended.
 **
 ** Definition: A <b>result table</b> is memory data structure created by the
@@ skipping 104 matching lines @@
 ** the zero terminator.  So the longest string that can be completely
 ** written will be n-1 characters.
 **
 ** ^The sqlite3_vsnprintf() routine is a varargs version of sqlite3_snprintf().
 **
 ** These routines all implement some additional formatting
 ** options that are useful for constructing SQL statements.
 ** All of the usual printf() formatting options apply.  In addition, there
 ** is are "%q", "%Q", and "%z" options.
 **
-** ^(The %q option works like %s in that it substitutes a null-terminated
+** ^(The %q option works like %s in that it substitutes a nul-terminated
 ** string from the argument list.  But %q also doubles every '\'' character.
 ** %q is designed for use inside a string literal.)^  By doubling each '\''
 ** character it escapes that character and allows it to be inserted into
 ** the string.
 **
 ** For example, assume the string variable zText contains text as follows:
 **
 ** <blockquote><pre>
 **  char *zText = "It's a happy day!";
 ** </pre></blockquote>
@@ skipping 54 matching lines @@
 ** does not include operating-system specific VFS implementation.  The
 ** Windows VFS uses native malloc() and free() for some operations.
 **
 ** ^The sqlite3_malloc() routine returns a pointer to a block
 ** of memory at least N bytes in length, where N is the parameter.
 ** ^If sqlite3_malloc() is unable to obtain sufficient free
 ** memory, it returns a NULL pointer.  ^If the parameter N to
 ** sqlite3_malloc() is zero or negative then sqlite3_malloc() returns
 ** a NULL pointer.
 **
+** ^The sqlite3_malloc64(N) routine works just like
+** sqlite3_malloc(N) except that N is an unsigned 64-bit integer instead
+** of a signed 32-bit integer.
+**
 ** ^Calling sqlite3_free() with a pointer previously returned
 ** by sqlite3_malloc() or sqlite3_realloc() releases that memory so
 ** that it might be reused.  ^The sqlite3_free() routine is
 ** a no-op if is called with a NULL pointer.  Passing a NULL pointer
 ** to sqlite3_free() is harmless.  After being freed, memory
 ** should neither be read nor written.  Even reading previously freed
 ** memory might result in a segmentation fault or other severe error.
 ** Memory corruption, a segmentation fault, or other severe error
 ** might result if sqlite3_free() is called with a non-NULL pointer that
 ** was not obtained from sqlite3_malloc() or sqlite3_realloc().
 **
-** ^(The sqlite3_realloc() interface attempts to resize a
-** prior memory allocation to be at least N bytes, where N is the
-** second parameter.  The memory allocation to be resized is the first
-** parameter.)^ ^ If the first parameter to sqlite3_realloc()
+** ^The sqlite3_realloc(X,N) interface attempts to resize a
+** prior memory allocation X to be at least N bytes.
+** ^If the X parameter to sqlite3_realloc(X,N)
 ** is a NULL pointer then its behavior is identical to calling
-** sqlite3_malloc(N) where N is the second parameter to sqlite3_realloc().
-** ^If the second parameter to sqlite3_realloc() is zero or
+** sqlite3_malloc(N).
+** ^If the N parameter to sqlite3_realloc(X,N) is zero or
 ** negative then the behavior is exactly the same as calling
-** sqlite3_free(P) where P is the first parameter to sqlite3_realloc().
-** ^sqlite3_realloc() returns a pointer to a memory allocation
-** of at least N bytes in size or NULL if sufficient memory is unavailable.
+** sqlite3_free(X).
+** ^sqlite3_realloc(X,N) returns a pointer to a memory allocation
+** of at least N bytes in size or NULL if insufficient memory is available.
 ** ^If M is the size of the prior allocation, then min(N,M) bytes
 ** of the prior allocation are copied into the beginning of buffer returned
-** by sqlite3_realloc() and the prior allocation is freed.
-** ^If sqlite3_realloc() returns NULL, then the prior allocation
-** is not freed.
+** by sqlite3_realloc(X,N) and the prior allocation is freed.
+** ^If sqlite3_realloc(X,N) returns NULL and N is positive, then the
+** prior allocation is not freed.
 **
-** ^The memory returned by sqlite3_malloc() and sqlite3_realloc()
+** ^The sqlite3_realloc64(X,N) interfaces works the same as
+** sqlite3_realloc(X,N) except that N is a 64-bit unsigned integer instead
+** of a 32-bit signed integer.
+**
+** ^If X is a memory allocation previously obtained from sqlite3_malloc(),
+** sqlite3_malloc64(), sqlite3_realloc(), or sqlite3_realloc64(), then
+** sqlite3_msize(X) returns the size of that memory allocation in bytes.
+** ^The value returned by sqlite3_msize(X) might be larger than the number
+** of bytes requested when X was allocated.  ^If X is a NULL pointer then
+** sqlite3_msize(X) returns zero.  If X points to something that is not
+** the beginning of memory allocation, or if it points to a formerly
+** valid memory allocation that has now been freed, then the behavior
+** of sqlite3_msize(X) is undefined and possibly harmful.
+**
+** ^The memory returned by sqlite3_malloc(), sqlite3_realloc(),
+** sqlite3_malloc64(), and sqlite3_realloc64()
 ** is always aligned to at least an 8 byte boundary, or to a
 ** 4 byte boundary if the [SQLITE_4_BYTE_ALIGNED_MALLOC] compile-time
 ** option is used.
 **
 ** In SQLite version 3.5.0 and 3.5.1, it was possible to define
 ** the SQLITE_OMIT_MEMORY_ALLOCATION which would cause the built-in
 ** implementation of these routines to be omitted.  That capability
 ** is no longer provided.  Only built-in memory allocators can be used.
 **
-** The Windows OS interface layer calls
+** Prior to SQLite version 3.7.10, the Windows OS interface layer called
 ** the system malloc() and free() directly when converting
 ** filenames between the UTF-8 encoding used by SQLite
 ** and whatever filename encoding is used by the particular Windows
-** installation.  Memory allocation errors are detected, but
-** they are reported back as [SQLITE_CANTOPEN] or
+** installation.  Memory allocation errors were detected, but
+** they were reported back as [SQLITE_CANTOPEN] or
 ** [SQLITE_IOERR] rather than [SQLITE_NOMEM].
 **
 ** The pointer arguments to [sqlite3_free()] and [sqlite3_realloc()]
 ** must be either NULL or else pointers obtained from a prior
 ** invocation of [sqlite3_malloc()] or [sqlite3_realloc()] that have
 ** not yet been released.
 **
 ** The application must not read or write any part of
 ** a block of memory after it has been released using
 ** [sqlite3_free()] or [sqlite3_realloc()].
 */
 SQLITE_API void *sqlite3_malloc(int);
+SQLITE_API void *sqlite3_malloc64(sqlite3_uint64);
 SQLITE_API void *sqlite3_realloc(void*, int);
+SQLITE_API void *sqlite3_realloc64(void*, sqlite3_uint64);
 SQLITE_API void sqlite3_free(void*);
+SQLITE_API sqlite3_uint64 sqlite3_msize(void*);
 
 /*
 ** CAPI3REF: Memory Allocator Statistics
 **
 ** SQLite provides these two interfaces for reporting on the status
 ** of the [sqlite3_malloc()], [sqlite3_free()], and [sqlite3_realloc()]
 ** routines, which form the built-in memory allocation subsystem.
 **
 ** ^The [sqlite3_memory_used()] routine returns the number of bytes
 ** of memory currently outstanding (malloced but not freed).
@@ skipping 17 matching lines @@
 /*
 ** CAPI3REF: Pseudo-Random Number Generator
 **
 ** SQLite contains a high-quality pseudo-random number generator (PRNG) used to
 ** select random [ROWID | ROWIDs] when inserting new records into a table that
 ** already uses the largest possible [ROWID].  The PRNG is also used for
 ** the build-in random() and randomblob() SQL functions.  This interface allows
 ** applications to access the same PRNG for other purposes.
 **
 ** ^A call to this routine stores N bytes of randomness into buffer P.
+** ^If N is less than one, then P can be a NULL pointer.
 **
-** ^The first time this routine is invoked (either internally or by
-** the application) the PRNG is seeded using randomness obtained
-** from the xRandomness method of the default [sqlite3_vfs] object.
-** ^On all subsequent invocations, the pseudo-randomness is generated
+** ^If this routine has not been previously called or if the previous
+** call had N less than one, then the PRNG is seeded using randomness
+** obtained from the xRandomness method of the default [sqlite3_vfs] object.
+** ^If the previous call to this routine had an N of 1 or more then
+** the pseudo-randomness is generated
 ** internally and without recourse to the [sqlite3_vfs] xRandomness
 ** method.
 */
 SQLITE_API void sqlite3_randomness(int N, void *P);
 
 /*
 ** CAPI3REF: Compile-Time Authorization Callbacks
 **
 ** ^This routine registers an authorizer callback with a particular
 ** [database connection], supplied in the first argument.
@@ skipping 79 matching lines @@
 );
 
 /*
 ** CAPI3REF: Authorizer Return Codes
 **
 ** The [sqlite3_set_authorizer | authorizer callback function] must
 ** return either [SQLITE_OK] or one of these two constants in order
 ** to signal SQLite whether or not the action is permitted.  See the
 ** [sqlite3_set_authorizer | authorizer documentation] for additional
 ** information.
+**
+** Note that SQLITE_IGNORE is also used as a [conflict resolution mode]
+** returned from the [sqlite3_vtab_on_conflict()] interface.
 */
 #define SQLITE_DENY   1   /* Abort the SQL statement with an error */
 #define SQLITE_IGNORE 2   /* Don't allow access, but don't generate an error */
 
 /*
 ** CAPI3REF: Authorizer Action Codes
 **
 ** The [sqlite3_set_authorizer()] interface registers a callback function
 ** that is invoked to authorize certain SQL statement actions.  The
 ** second parameter to the callback is an integer code that specifies
@@ skipping 37 matching lines @@
 #define SQLITE_ATTACH               24   /* Filename        NULL            */
 #define SQLITE_DETACH               25   /* Database Name   NULL            */
 #define SQLITE_ALTER_TABLE          26   /* Database Name   Table Name      */
 #define SQLITE_REINDEX              27   /* Index Name      NULL            */
 #define SQLITE_ANALYZE              28   /* Table Name      NULL            */
 #define SQLITE_CREATE_VTABLE        29   /* Table Name      Module Name     */
 #define SQLITE_DROP_VTABLE          30   /* Table Name      Module Name     */
 #define SQLITE_FUNCTION             31   /* NULL            Function Name   */
 #define SQLITE_SAVEPOINT            32   /* Operation       Savepoint Name  */
 #define SQLITE_COPY                  0   /* No longer used */
+#define SQLITE_RECURSIVE            33   /* NULL            NULL            */
 
 /*
 ** CAPI3REF: Tracing And Profiling Functions
 **
 ** These routines register callback functions that can be used for
 ** tracing and profiling the execution of SQL statements.
 **
 ** ^The callback function registered by sqlite3_trace() is invoked at
 ** various times when an SQL statement is being run by [sqlite3_step()].
 ** ^The sqlite3_trace() callback is invoked with a UTF-8 rendering of the
 ** SQL statement text as the statement first begins executing.
 ** ^(Additional sqlite3_trace() callbacks might occur
 ** as each triggered subprogram is entered.  The callbacks for triggers
 ** contain a UTF-8 SQL comment that identifies the trigger.)^
 **
+** The [SQLITE_TRACE_SIZE_LIMIT] compile-time option can be used to limit
+** the length of [bound parameter] expansion in the output of sqlite3_trace().
+**
 ** ^The callback function registered by sqlite3_profile() is invoked
 ** as each SQL statement finishes.  ^The profile callback contains
 ** the original statement text and an estimate of wall-clock time
 ** of how long that statement took to run.  ^The profile callback
 ** time is in units of nanoseconds, however the current implementation
 ** is only capable of millisecond resolution so the six least significant
 ** digits in the time are meaningless.  Future versions of SQLite
 ** might provide greater resolution on the profiler callback.  The
 ** sqlite3_profile() function is considered experimental and is
 ** subject to change in future versions of SQLite.
 */
 SQLITE_API void *sqlite3_trace(sqlite3*, void(*xTrace)(void*,const char*), void*);
 SQLITE_API SQLITE_EXPERIMENTAL void *sqlite3_profile(sqlite3*,
    void(*xProfile)(void*,const char*,sqlite3_uint64), void*);
 
 /*
 ** CAPI3REF: Query Progress Callbacks
 **
 ** ^The sqlite3_progress_handler(D,N,X,P) interface causes the callback
 ** function X to be invoked periodically during long running calls to
 ** [sqlite3_exec()], [sqlite3_step()] and [sqlite3_get_table()] for
 ** database connection D.  An example use for this
 ** interface is to keep a GUI updated during a large query.
 **
 ** ^The parameter P is passed through as the only parameter to the 
-** callback function X.  ^The parameter N is the number of 
+** callback function X.  ^The parameter N is the approximate number of 
 ** [virtual machine instructions] that are evaluated between successive
-** invocations of the callback X.
+** invocations of the callback X.  ^If N is less than one then the progress
+** handler is disabled.
 **
 ** ^Only a single progress handler may be defined at one time per
 ** [database connection]; setting a new progress handler cancels the
 ** old one.  ^Setting parameter X to NULL disables the progress handler.
 ** ^The progress handler is also disabled by setting N to a value less
 ** than 1.
 **
 ** ^If the progress callback returns non-zero, the operation is
 ** interrupted.  This feature can be used to implement a
 ** "Cancel" button on a GUI progress dialog box.
 **
 ** The progress handler callback must not do anything that will modify
 ** the database connection that invoked the progress handler.
 ** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their
 ** database connections for the meaning of "modify" in this paragraph.
 **
 */
 SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
 
 /*
 ** CAPI3REF: Opening A New Database Connection
 **
-** ^These routines open an SQLite database file whose name is given by the
+** ^These routines open an SQLite database file as specified by the 
 ** filename argument. ^The filename argument is interpreted as UTF-8 for
 ** sqlite3_open() and sqlite3_open_v2() and as UTF-16 in the native byte
 ** order for sqlite3_open16(). ^(A [database connection] handle is usually
 ** returned in *ppDb, even if an error occurs.  The only exception is that
 ** if SQLite is unable to allocate memory to hold the [sqlite3] object,
 ** a NULL will be written into *ppDb instead of a pointer to the [sqlite3]
 ** object.)^ ^(If the database is opened (and/or created) successfully, then
 ** [SQLITE_OK] is returned.  Otherwise an [error code] is returned.)^ ^The
 ** [sqlite3_errmsg()] or [sqlite3_errmsg16()] routines can be used to obtain
 ** an English language description of the error following a failure of any
 ** of the sqlite3_open() routines.
 **
-** ^The default encoding for the database will be UTF-8 if
-** sqlite3_open() or sqlite3_open_v2() is called and
-** UTF-16 in the native byte order if sqlite3_open16() is used.
+** ^The default encoding will be UTF-8 for databases created using
+** sqlite3_open() or sqlite3_open_v2().  ^The default encoding for databases
+** created using sqlite3_open16() will be UTF-16 in the native byte order.
 **
 ** Whether or not an error occurs when it is opened, resources
 ** associated with the [database connection] handle should be released by
 ** passing it to [sqlite3_close()] when it is no longer required.
 **
 ** The sqlite3_open_v2() interface works like sqlite3_open()
 ** except that it accepts two additional parameters for additional control
 ** over the new database connection.  ^(The flags parameter to
 ** sqlite3_open_v2() can take one of
 ** the following three values, optionally combined with the 
 ** [SQLITE_OPEN_NOMUTEX], [SQLITE_OPEN_FULLMUTEX], [SQLITE_OPEN_SHAREDCACHE],
-** and/or [SQLITE_OPEN_PRIVATECACHE] flags:)^
+** [SQLITE_OPEN_PRIVATECACHE], and/or [SQLITE_OPEN_URI] flags:)^
 **
 ** <dl>
 ** ^(<dt>[SQLITE_OPEN_READONLY]</dt>
 ** <dd>The database is opened in read-only mode.  If the database does not
 ** already exist, an error is returned.</dd>)^
 **
 ** ^(<dt>[SQLITE_OPEN_READWRITE]</dt>
 ** <dd>The database is opened for reading and writing if possible, or reading
 ** only if the file is write protected by the operating system.  In either
 ** case the database must already exist, otherwise an error is returned.</dd>)^
 **
 ** ^(<dt>[SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE]</dt>
 ** <dd>The database is opened for reading and writing, and is created if
 ** it does not already exist. This is the behavior that is always used for
 ** sqlite3_open() and sqlite3_open16().</dd>)^
 ** </dl>
 **
 ** If the 3rd parameter to sqlite3_open_v2() is not one of the
-** combinations shown above or one of the combinations shown above combined
-** with the [SQLITE_OPEN_NOMUTEX], [SQLITE_OPEN_FULLMUTEX],
-** [SQLITE_OPEN_SHAREDCACHE] and/or [SQLITE_OPEN_PRIVATECACHE] flags,
+** combinations shown above optionally combined with other
+** [SQLITE_OPEN_READONLY | SQLITE_OPEN_* bits]
 ** then the behavior is undefined.
 **
 ** ^If the [SQLITE_OPEN_NOMUTEX] flag is set, then the database connection
 ** opens in the multi-thread [threading mode] as long as the single-thread
 ** mode has not been set at compile-time or start-time.  ^If the
 ** [SQLITE_OPEN_FULLMUTEX] flag is set then the database connection opens
 ** in the serialized [threading mode] unless single-thread was
 ** previously selected at compile-time or start-time.
 ** ^The [SQLITE_OPEN_SHAREDCACHE] flag causes the database connection to be
 ** eligible to use [shared cache mode], regardless of whether or not shared
 ** cache is enabled using [sqlite3_enable_shared_cache()].  ^The
 ** [SQLITE_OPEN_PRIVATECACHE] flag causes the database connection to not
 ** participate in [shared cache mode] even if it is enabled.
 **
+** ^The fourth parameter to sqlite3_open_v2() is the name of the
+** [sqlite3_vfs] object that defines the operating system interface that
+** the new database connection should use.  ^If the fourth parameter is
+** a NULL pointer then the default [sqlite3_vfs] object is used.
+**
 ** ^If the filename is ":memory:", then a private, temporary in-memory database
 ** is created for the connection.  ^This in-memory database will vanish when
 ** the database connection is closed.  Future versions of SQLite might
 ** make use of additional special filenames that begin with the ":" character.
 ** It is recommended that when a database filename actually does begin with
 ** a ":" character you should prefix the filename with a pathname such as
 ** "./" to avoid ambiguity.
 **
 ** ^If the filename is an empty string, then a private, temporary
 ** on-disk database will be created.  ^This private database will be
 ** automatically deleted as soon as the database connection is closed.
 **
-** ^The fourth parameter to sqlite3_open_v2() is the name of the
-** [sqlite3_vfs] object that defines the operating system interface that
-** the new database connection should use.  ^If the fourth parameter is
-** a NULL pointer then the default [sqlite3_vfs] object is used.
+** [[URI filenames in sqlite3_open()]] <h3>URI Filenames</h3>
+**
+** ^If [URI filename] interpretation is enabled, and the filename argument
+** begins with "file:", then the filename is interpreted as a URI. ^URI
+** filename interpretation is enabled if the [SQLITE_OPEN_URI] flag is
+** set in the fourth argument to sqlite3_open_v2(), or if it has
+** been enabled globally using the [SQLITE_CONFIG_URI] option with the
+** [sqlite3_config()] method or by the [SQLITE_USE_URI] compile-time option.
+** As of SQLite version 3.7.7, URI filename interpretation is turned off
+** by default, but future releases of SQLite might enable URI filename
+** interpretation by default.  See "[URI filenames]" for additional
+** information.
+**
+** URI filenames are parsed according to RFC 3986. ^If the URI contains an
+** authority, then it must be either an empty string or the string 
+** "localhost". ^If the authority is not an empty string or "localhost", an 
+** error is returned to the caller. ^The fragment component of a URI, if 
+** present, is ignored.
+**
+** ^SQLite uses the path component of the URI as the name of the disk file
+** which contains the database. ^If the path begins with a '/' character, 
+** then it is interpreted as an absolute path. ^If the path does not begin 
+** with a '/' (meaning that the authority section is omitted from the URI)
+** then the path is interpreted as a relative path. 
+** ^(On windows, the first component of an absolute path 
+** is a drive specification (e.g. "C:").)^
+**
+** [[core URI query parameters]]
+** The query component of a URI may contain parameters that are interpreted
+** either by SQLite itself, or by a [VFS | custom VFS implementation].
+** SQLite and its built-in [VFSes] interpret the
+** following query parameters:
+**
+** <ul>
+**   <li> <b>vfs</b>: ^The "vfs" parameter may be used to specify the name of
+**     a VFS object that provides the operating system interface that should
+**     be used to access the database file on disk. ^If this option is set to
+**     an empty string the default VFS object is used. ^Specifying an unknown
+**     VFS is an error. ^If sqlite3_open_v2() is used and the vfs option is
+**     present, then the VFS specified by the option takes precedence over
+**     the value passed as the fourth parameter to sqlite3_open_v2().
+**
+**   <li> <b>mode</b>: ^(The mode parameter may be set to either "ro", "rw",
+**     "rwc", or "memory". Attempting to set it to any other value is
+**     an error)^. 
+**     ^If "ro" is specified, then the database is opened for read-only 
+**     access, just as if the [SQLITE_OPEN_READONLY] flag had been set in the 
+**     third argument to sqlite3_open_v2(). ^If the mode option is set to 
+**     "rw", then the database is opened for read-write (but not create) 
+**     access, as if SQLITE_OPEN_READWRITE (but not SQLITE_OPEN_CREATE) had 
+**     been set. ^Value "rwc" is equivalent to setting both 
+**     SQLITE_OPEN_READWRITE and SQLITE_OPEN_CREATE.  ^If the mode option is
+**     set to "memory" then a pure [in-memory database] that never reads
+**     or writes from disk is used. ^It is an error to specify a value for
+**     the mode parameter that is less restrictive than that specified by
+**     the flags passed in the third parameter to sqlite3_open_v2().
+**
+**   <li> <b>cache</b>: ^The cache parameter may be set to either "shared" or
+**     "private". ^Setting it to "shared" is equivalent to setting the
+**     SQLITE_OPEN_SHAREDCACHE bit in the flags argument passed to
+**     sqlite3_open_v2(). ^Setting the cache parameter to "private" is 
+**     equivalent to setting the SQLITE_OPEN_PRIVATECACHE bit.
+**     ^If sqlite3_open_v2() is used and the "cache" parameter is present in
+**     a URI filename, its value overrides any behavior requested by setting
+**     SQLITE_OPEN_PRIVATECACHE or SQLITE_OPEN_SHAREDCACHE flag.
+**
+**  <li> <b>psow</b>: ^The psow parameter indicates whether or not the
+**     [powersafe overwrite] property does or does not apply to the
+**     storage media on which the database file resides.
+**
+**  <li> <b>nolock</b>: ^The nolock parameter is a boolean query parameter
+**     which if set disables file locking in rollback journal modes.  This
+**     is useful for accessing a database on a filesystem that does not
+**     support locking.  Caution:  Database corruption might result if two
+**     or more processes write to the same database and any one of those
+**     processes uses nolock=1.
+**
+**  <li> <b>immutable</b>: ^The immutable parameter is a boolean query
+**     parameter that indicates that the database file is stored on
+**     read-only media.  ^When immutable is set, SQLite assumes that the
+**     database file cannot be changed, even by a process with higher
+**     privilege, and so the database is opened read-only and all locking
+**     and change detection is disabled.  Caution: Setting the immutable
+**     property on a database file that does in fact change can result
+**     in incorrect query results and/or [SQLITE_CORRUPT] errors.
+**     See also: [SQLITE_IOCAP_IMMUTABLE].
+**       
+** </ul>
+**
+** ^Specifying an unknown parameter in the query component of a URI is not an
+** error.  Future versions of SQLite might understand additional query
+** parameters.  See "[query parameters with special meaning to SQLite]" for
+** additional information.
+**
+** [[URI filename examples]] <h3>URI filename examples</h3>
+**
+** <table border="1" align=center cellpadding=5>
+** <tr><th> URI filenames <th> Results
+** <tr><td> file:data.db <td> 
+**          Open the file "data.db" in the current directory.
+** <tr><td> file:/home/fred/data.db<br>
+**          file:///home/fred/data.db <br> 
+**          file://localhost/home/fred/data.db <br> <td> 
+**          Open the database file "/home/fred/data.db".
+** <tr><td> file://darkstar/home/fred/data.db <td> 
+**          An error. "darkstar" is not a recognized authority.
+** <tr><td style="white-space:nowrap"> 
+**          file:///C:/Documents%20and%20Settings/fred/Desktop/data.db
+**     <td> Windows only: Open the file "data.db" on fred's desktop on drive
+**          C:. Note that the %20 escaping in this example is not strictly 
+**          necessary - space characters can be used literally
+**          in URI filenames.
+** <tr><td> file:data.db?mode=ro&cache=private <td> 
+**          Open file "data.db" in the current directory for read-only access.
+**          Regardless of whether or not shared-cache mode is enabled by
+**          default, use a private cache.
+** <tr><td> file:/home/fred/data.db?vfs=unix-dotfile <td>
+**          Open file "/home/fred/data.db". Use the special VFS "unix-dotfile"
+**          that uses dot-files in place of posix advisory locking.
+** <tr><td> file:data.db?mode=readonly <td> 
+**          An error. "readonly" is not a valid option for the "mode" parameter.
+** </table>
+**
+** ^URI hexadecimal escape sequences (%HH) are supported within the path and
+** query components of a URI. A hexadecimal escape sequence consists of a
+** percent sign - "%" - followed by exactly two hexadecimal digits 
+** specifying an octet value. ^Before the path or query components of a
+** URI filename are interpreted, they are encoded using UTF-8 and all 
+** hexadecimal escape sequences replaced by a single byte containing the
+** corresponding octet. If this process generates an invalid UTF-8 encoding,
+** the results are undefined.
 **
 ** <b>Note to Windows users:</b>  The encoding used for the filename argument
 ** of sqlite3_open() and sqlite3_open_v2() must be UTF-8, not whatever
 ** codepage is currently defined.  Filenames containing international
 ** characters must be converted to UTF-8 prior to passing them into
 ** sqlite3_open() or sqlite3_open_v2().
+**
+** <b>Note to Windows Runtime users:</b>  The temporary directory must be set
+** prior to calling sqlite3_open() or sqlite3_open_v2().  Otherwise, various
+** features that require the use of temporary files may fail.
+**
+** See also: [sqlite3_temp_directory]
 */
 SQLITE_API int sqlite3_open(
   const char *filename,   /* Database filename (UTF-8) */
   sqlite3 **ppDb          /* OUT: SQLite db handle */
 );
 SQLITE_API int sqlite3_open16(
   const void *filename,   /* Database filename (UTF-16) */
   sqlite3 **ppDb          /* OUT: SQLite db handle */
 );
 SQLITE_API int sqlite3_open_v2(
   const char *filename,   /* Database filename (UTF-8) */
   sqlite3 **ppDb,         /* OUT: SQLite db handle */
   int flags,              /* Flags */
   const char *zVfs        /* Name of VFS module to use */
 );
 
 /*
+** CAPI3REF: Obtain Values For URI Parameters
+**
+** These are utility routines, useful to VFS implementations, that check
+** to see if a database file was a URI that contained a specific query 
+** parameter, and if so obtains the value of that query parameter.
+**
+** If F is the database filename pointer passed into the xOpen() method of 
+** a VFS implementation when the flags parameter to xOpen() has one or 
+** more of the [SQLITE_OPEN_URI] or [SQLITE_OPEN_MAIN_DB] bits set and
+** P is the name of the query parameter, then
+** sqlite3_uri_parameter(F,P) returns the value of the P
+** parameter if it exists or a NULL pointer if P does not appear as a 
+** query parameter on F.  If P is a query parameter of F
+** has no explicit value, then sqlite3_uri_parameter(F,P) returns
+** a pointer to an empty string.
+**
+** The sqlite3_uri_boolean(F,P,B) routine assumes that P is a boolean
+** parameter and returns true (1) or false (0) according to the value
+** of P.  The sqlite3_uri_boolean(F,P,B) routine returns true (1) if the
+** value of query parameter P is one of "yes", "true", or "on" in any
+** case or if the value begins with a non-zero number.  The 
+** sqlite3_uri_boolean(F,P,B) routines returns false (0) if the value of
+** query parameter P is one of "no", "false", or "off" in any case or
+** if the value begins with a numeric zero.  If P is not a query
+** parameter on F or if the value of P is does not match any of the
+** above, then sqlite3_uri_boolean(F,P,B) returns (B!=0).
+**
+** The sqlite3_uri_int64(F,P,D) routine converts the value of P into a
+** 64-bit signed integer and returns that integer, or D if P does not
+** exist.  If the value of P is something other than an integer, then
+** zero is returned.
+** 
+** If F is a NULL pointer, then sqlite3_uri_parameter(F,P) returns NULL and
+** sqlite3_uri_boolean(F,P,B) returns B.  If F is not a NULL pointer and
+** is not a database file pathname pointer that SQLite passed into the xOpen
+** VFS method, then the behavior of this routine is undefined and probably
+** undesirable.
+*/
+SQLITE_API const char *sqlite3_uri_parameter(const char *zFilename, const char *zParam);
+SQLITE_API int sqlite3_uri_boolean(const char *zFile, const char *zParam, int bDefault);
+SQLITE_API sqlite3_int64 sqlite3_uri_int64(const char*, const char*, sqlite3_int64);
+
+
+/*
 ** CAPI3REF: Error Codes And Messages
 **
 ** ^The sqlite3_errcode() interface returns the numeric [result code] or
 ** [extended result code] for the most recent failed sqlite3_* API call
 ** associated with a [database connection]. If a prior API call failed
 ** but the most recent API call succeeded, the return value from
 ** sqlite3_errcode() is undefined.  ^The sqlite3_extended_errcode()
 ** interface is the same except that it always returns the 
 ** [extended result code] even when extended result codes are
 ** disabled.
 **
 ** ^The sqlite3_errmsg() and sqlite3_errmsg16() return English-language
 ** text that describes the error, as either UTF-8 or UTF-16 respectively.
 ** ^(Memory to hold the error message string is managed internally.
 ** The application does not need to worry about freeing the result.
 ** However, the error string might be overwritten or deallocated by
 ** subsequent calls to other SQLite interface functions.)^
 **
+** ^The sqlite3_errstr() interface returns the English-language text
+** that describes the [result code], as UTF-8.
+** ^(Memory to hold the error message string is managed internally
+** and must not be freed by the application)^.
+**
 ** When the serialized [threading mode] is in use, it might be the
 ** case that a second error occurs on a separate thread in between
 ** the time of the first error and the call to these interfaces.
 ** When that happens, the second error will be reported since these
 ** interfaces always report the most recent result.  To avoid
 ** this, each thread can obtain exclusive use of the [database connection] D
 ** by invoking [sqlite3_mutex_enter]([sqlite3_db_mutex](D)) before beginning
 ** to use D and invoking [sqlite3_mutex_leave]([sqlite3_db_mutex](D)) after
 ** all calls to the interfaces listed here are completed.
 **
 ** If an interface fails with SQLITE_MISUSE, that means the interface
 ** was invoked incorrectly by the application.  In that case, the
 ** error code and message may or may not be set.
 */
 SQLITE_API int sqlite3_errcode(sqlite3 *db);
 SQLITE_API int sqlite3_extended_errcode(sqlite3 *db);
 SQLITE_API const char *sqlite3_errmsg(sqlite3*);
 SQLITE_API const void *sqlite3_errmsg16(sqlite3*);
+SQLITE_API const char *sqlite3_errstr(int);
 
 /*
 ** CAPI3REF: SQL Statement Object
 ** KEYWORDS: {prepared statement} {prepared statements}
 **
 ** An instance of this object represents a single SQL statement.
 ** This object is variously known as a "prepared statement" or a
 ** "compiled SQL statement" or simply as a "statement".
 **
 ** The life of a statement object goes something like this:
@@ skipping 58 matching lines @@
 /*
 ** CAPI3REF: Run-Time Limit Categories
 ** KEYWORDS: {limit category} {*limit categories}
 **
 ** These constants define various performance limits
 ** that can be lowered at run-time using [sqlite3_limit()].
 ** The synopsis of the meanings of the various limits is shown below.
 ** Additional information is available at [limits | Limits in SQLite].
 **
 ** <dl>
-** ^(<dt>SQLITE_LIMIT_LENGTH</dt>
+** [[SQLITE_LIMIT_LENGTH]] ^(<dt>SQLITE_LIMIT_LENGTH</dt>
 ** <dd>The maximum size of any string or BLOB or table row, in bytes.<dd>)^
 **
-** ^(<dt>SQLITE_LIMIT_SQL_LENGTH</dt>
+** [[SQLITE_LIMIT_SQL_LENGTH]] ^(<dt>SQLITE_LIMIT_SQL_LENGTH</dt>
 ** <dd>The maximum length of an SQL statement, in bytes.</dd>)^
 **
-** ^(<dt>SQLITE_LIMIT_COLUMN</dt>
+** [[SQLITE_LIMIT_COLUMN]] ^(<dt>SQLITE_LIMIT_COLUMN</dt>
 ** <dd>The maximum number of columns in a table definition or in the
 ** result set of a [SELECT] or the maximum number of columns in an index
 ** or in an ORDER BY or GROUP BY clause.</dd>)^
 **
-** ^(<dt>SQLITE_LIMIT_EXPR_DEPTH</dt>
+** [[SQLITE_LIMIT_EXPR_DEPTH]] ^(<dt>SQLITE_LIMIT_EXPR_DEPTH</dt>
 ** <dd>The maximum depth of the parse tree on any expression.</dd>)^
 **
-** ^(<dt>SQLITE_LIMIT_COMPOUND_SELECT</dt>
+** [[SQLITE_LIMIT_COMPOUND_SELECT]] ^(<dt>SQLITE_LIMIT_COMPOUND_SELECT</dt>
 ** <dd>The maximum number of terms in a compound SELECT statement.</dd>)^
 **
-** ^(<dt>SQLITE_LIMIT_VDBE_OP</dt>
+** [[SQLITE_LIMIT_VDBE_OP]] ^(<dt>SQLITE_LIMIT_VDBE_OP</dt>
 ** <dd>The maximum number of instructions in a virtual machine program
 ** used to implement an SQL statement.  This limit is not currently
 ** enforced, though that might be added in some future release of
 ** SQLite.</dd>)^
 **
-** ^(<dt>SQLITE_LIMIT_FUNCTION_ARG</dt>
+** [[SQLITE_LIMIT_FUNCTION_ARG]] ^(<dt>SQLITE_LIMIT_FUNCTION_ARG</dt>
 ** <dd>The maximum number of arguments on a function.</dd>)^
 **
-** ^(<dt>SQLITE_LIMIT_ATTACHED</dt>
+** [[SQLITE_LIMIT_ATTACHED]] ^(<dt>SQLITE_LIMIT_ATTACHED</dt>
 ** <dd>The maximum number of [ATTACH | attached databases].)^</dd>
 **
+** [[SQLITE_LIMIT_LIKE_PATTERN_LENGTH]]
 ** ^(<dt>SQLITE_LIMIT_LIKE_PATTERN_LENGTH</dt>
 ** <dd>The maximum length of the pattern argument to the [LIKE] or
 ** [GLOB] operators.</dd>)^
 **
+** [[SQLITE_LIMIT_VARIABLE_NUMBER]]
 ** ^(<dt>SQLITE_LIMIT_VARIABLE_NUMBER</dt>
 ** <dd>The maximum index number of any [parameter] in an SQL statement.)^
 **
-** ^(<dt>SQLITE_LIMIT_TRIGGER_DEPTH</dt>
+** [[SQLITE_LIMIT_TRIGGER_DEPTH]] ^(<dt>SQLITE_LIMIT_TRIGGER_DEPTH</dt>
 ** <dd>The maximum depth of recursion for triggers.</dd>)^
+**
+** [[SQLITE_LIMIT_WORKER_THREADS]] ^(<dt>SQLITE_LIMIT_WORKER_THREADS</dt>
+** <dd>The maximum number of auxiliary worker threads that a single
+** [prepared statement] may start.</dd>)^
 ** </dl>
 */
 #define SQLITE_LIMIT_LENGTH                    0
 #define SQLITE_LIMIT_SQL_LENGTH                1
 #define SQLITE_LIMIT_COLUMN                    2
 #define SQLITE_LIMIT_EXPR_DEPTH                3
 #define SQLITE_LIMIT_COMPOUND_SELECT           4
 #define SQLITE_LIMIT_VDBE_OP                   5
 #define SQLITE_LIMIT_FUNCTION_ARG              6
 #define SQLITE_LIMIT_ATTACHED                  7
 #define SQLITE_LIMIT_LIKE_PATTERN_LENGTH       8
 #define SQLITE_LIMIT_VARIABLE_NUMBER           9
 #define SQLITE_LIMIT_TRIGGER_DEPTH            10
+#define SQLITE_LIMIT_WORKER_THREADS           11
 
 /*
 ** CAPI3REF: Compiling An SQL Statement
 ** KEYWORDS: {SQL statement compiler}
 **
 ** To execute an SQL query, it must first be compiled into a byte-code
 ** program using one of these routines.
 **
 ** The first argument, "db", is a [database connection] obtained from a
 ** prior successful call to [sqlite3_open()], [sqlite3_open_v2()] or
 ** [sqlite3_open16()].  The database connection must not have been closed.
 **
 ** The second argument, "zSql", is the statement to be compiled, encoded
 ** as either UTF-8 or UTF-16.  The sqlite3_prepare() and sqlite3_prepare_v2()
 ** interfaces use UTF-8, and sqlite3_prepare16() and sqlite3_prepare16_v2()
 ** use UTF-16.
 **
 ** ^If the nByte argument is less than zero, then zSql is read up to the
 ** first zero terminator. ^If nByte is non-negative, then it is the maximum
 ** number of  bytes read from zSql.  ^When nByte is non-negative, the
 ** zSql string ends at either the first '\000' or '\u0000' character or
 ** the nByte-th byte, whichever comes first. If the caller knows
 ** that the supplied string is nul-terminated, then there is a small
 ** performance advantage to be gained by passing an nByte parameter that
 ** is equal to the number of bytes in the input string <i>including</i>
-** the nul-terminator bytes.
+** the nul-terminator bytes as this saves SQLite from having to
+** make a copy of the input string.
 **
 ** ^If pzTail is not NULL then *pzTail is made to point to the first byte
 ** past the end of the first SQL statement in zSql.  These routines only
 ** compile the first statement in zSql, so *pzTail is left pointing to
 ** what remains uncompiled.
 **
 ** ^*ppStmt is left pointing to a compiled [prepared statement] that can be
 ** executed using [sqlite3_step()].  ^If there is an error, *ppStmt is set
 ** to NULL.  ^If the input text contains no SQL (if the input is an empty
 ** string or a comment) then *ppStmt is set to NULL.
 ** The calling procedure is responsible for deleting the compiled
 ** SQL statement using [sqlite3_finalize()] after it has finished with it.
 ** ppStmt may not be NULL.
 **
 ** ^On success, the sqlite3_prepare() family of routines return [SQLITE_OK];
 ** otherwise an [error code] is returned.
 **
 ** The sqlite3_prepare_v2() and sqlite3_prepare16_v2() interfaces are
 ** recommended for all new programs. The two older interfaces are retained
 ** for backwards compatibility, but their use is discouraged.
 ** ^In the "v2" interfaces, the prepared statement
 ** that is returned (the [sqlite3_stmt] object) contains a copy of the
 ** original SQL text. This causes the [sqlite3_step()] interface to
 ** behave differently in three ways:
 **
 ** <ol>
 ** <li>
 ** ^If the database schema changes, instead of returning [SQLITE_SCHEMA] as it
 ** always used to do, [sqlite3_step()] will automatically recompile the SQL
-** statement and try to run it again.
+** statement and try to run it again. As many as [SQLITE_MAX_SCHEMA_RETRY]
+** retries will occur before sqlite3_step() gives up and returns an error.
 ** </li>
 **
 ** <li>
 ** ^When an error occurs, [sqlite3_step()] will return one of the detailed
 ** [error codes] or [extended error codes].  ^The legacy behavior was that
 ** [sqlite3_step()] would only return a generic [SQLITE_ERROR] result code
 ** and the application would have to make a second call to [sqlite3_reset()]
 ** in order to find the underlying cause of the problem. With the "v2" prepare
 ** interfaces, the underlying reason for the error is returned immediately.
 ** </li>
 **
 ** <li>
 ** ^If the specific value bound to [parameter | host parameter] in the 
 ** WHERE clause might influence the choice of query plan for a statement,
 ** then the statement will be automatically recompiled, as if there had been 
 ** a schema change, on the first  [sqlite3_step()] call following any change
 ** to the [sqlite3_bind_text | bindings] of that [parameter]. 
 ** ^The specific value of WHERE-clause [parameter] might influence the 
 ** choice of query plan if the parameter is the left-hand side of a [LIKE]
 ** or [GLOB] operator or if the parameter is compared to an indexed column
-** and the [SQLITE_ENABLE_STAT2] compile-time option is enabled.
-** the 
+** and the [SQLITE_ENABLE_STAT3] compile-time option is enabled.
 ** </li>
 ** </ol>
 */
 SQLITE_API int sqlite3_prepare(
   sqlite3 *db,            /* Database handle */
   const char *zSql,       /* SQL statement, UTF-8 encoded */
   int nByte,              /* Maximum length of zSql in bytes. */
   sqlite3_stmt **ppStmt,  /* OUT: Statement handle */
   const char **pzTail     /* OUT: Pointer to unused portion of zSql */
 );
@@ skipping 53 matching lines @@
 ** since the statements themselves do not actually modify the database but
 ** rather they control the timing of when other statements modify the 
 ** database.  ^The [ATTACH] and [DETACH] statements also cause
 ** sqlite3_stmt_readonly() to return true since, while those statements
 ** change the configuration of a database connection, they do not make 
 ** changes to the content of the database files on disk.
 */
 SQLITE_API int sqlite3_stmt_readonly(sqlite3_stmt *pStmt);
 
 /*
+** CAPI3REF: Determine If A Prepared Statement Has Been Reset
+**
+** ^The sqlite3_stmt_busy(S) interface returns true (non-zero) if the
+** [prepared statement] S has been stepped at least once using 
+** [sqlite3_step(S)] but has not run to completion and/or has not 
+** been reset using [sqlite3_reset(S)].  ^The sqlite3_stmt_busy(S)
+** interface returns false if S is a NULL pointer.  If S is not a 
+** NULL pointer and is not a pointer to a valid [prepared statement]
+** object, then the behavior is undefined and probably undesirable.
+**
+** This interface can be used in combination [sqlite3_next_stmt()]
+** to locate all prepared statements associated with a database 
+** connection that are in need of being reset.  This can be used,
+** for example, in diagnostic routines to search for prepared 
+** statements that are holding a transaction open.
+*/
+SQLITE_API int sqlite3_stmt_busy(sqlite3_stmt*);
+
+/*
 ** CAPI3REF: Dynamically Typed Value Object
 ** KEYWORDS: {protected sqlite3_value} {unprotected sqlite3_value}
 **
 ** SQLite uses the sqlite3_value object to represent all values
 ** that can be stored in a database table. SQLite uses dynamic typing
 ** for the values it stores.  ^Values stored in sqlite3_value objects
 ** can be integers, floating point values, strings, BLOBs, or NULL.
 **
 ** An sqlite3_value object may be either "protected" or "unprotected".
 ** Some interfaces require a protected sqlite3_value.  Other interfaces
@@ skipping 69 matching lines @@
 ** ^The leftmost SQL parameter has an index of 1.  ^When the same named
 ** SQL parameter is used more than once, second and subsequent
 ** occurrences have the same index as the first occurrence.
 ** ^The index for named parameters can be looked up using the
 ** [sqlite3_bind_parameter_index()] API if desired.  ^The index
 ** for "?NNN" parameters is the value of NNN.
 ** ^The NNN value must be between 1 and the [sqlite3_limit()]
 ** parameter [SQLITE_LIMIT_VARIABLE_NUMBER] (default value: 999).
 **
 ** ^The third argument is the value to bind to the parameter.
+** ^If the third parameter to sqlite3_bind_text() or sqlite3_bind_text16()
+** or sqlite3_bind_blob() is a NULL pointer then the fourth parameter
+** is ignored and the end result is the same as sqlite3_bind_null().
 **
 ** ^(In those routines that have a fourth argument, its value is the
 ** number of bytes in the parameter.  To be clear: the value is the
 ** number of <u>bytes</u> in the value, not the number of characters.)^
-** ^If the fourth parameter is negative, the length of the string is
+** ^If the fourth parameter to sqlite3_bind_text() or sqlite3_bind_text16()
+** is negative, then the length of the string is
 ** the number of bytes up to the first zero terminator.
+** If the fourth parameter to sqlite3_bind_blob() is negative, then
+** the behavior is undefined.
+** If a non-negative fourth parameter is provided to sqlite3_bind_text()
+** or sqlite3_bind_text16() or sqlite3_bind_text64() then
+** that parameter must be the byte offset
+** where the NUL terminator would occur assuming the string were NUL
+** terminated.  If any NUL characters occur at byte offsets less than 
+** the value of the fourth parameter then the resulting string value will
+** contain embedded NULs.  The result of expressions involving strings
+** with embedded NULs is undefined.
 **
-** ^The fifth argument to sqlite3_bind_blob(), sqlite3_bind_text(), and
-** sqlite3_bind_text16() is a destructor used to dispose of the BLOB or
+** ^The fifth argument to the BLOB and string binding interfaces
+** is a destructor used to dispose of the BLOB or
 ** string after SQLite has finished with it.  ^The destructor is called
-** to dispose of the BLOB or string even if the call to sqlite3_bind_blob(),
-** sqlite3_bind_text(), or sqlite3_bind_text16() fails.  
+** to dispose of the BLOB or string even if the call to bind API fails.
 ** ^If the fifth argument is
 ** the special value [SQLITE_STATIC], then SQLite assumes that the
 ** information is in static, unmanaged space and does not need to be freed.
 ** ^If the fifth argument has the value [SQLITE_TRANSIENT], then
 ** SQLite makes its own private copy of the data immediately, before
 ** the sqlite3_bind_*() routine returns.
 **
+** ^The sixth argument to sqlite3_bind_text64() must be one of
+** [SQLITE_UTF8], [SQLITE_UTF16], [SQLITE_UTF16BE], or [SQLITE_UTF16LE]
+** to specify the encoding of the text in the third parameter.  If
+** the sixth argument to sqlite3_bind_text64() is not one of the
+** allowed values shown above, or if the text encoding is different
+** from the encoding specified by the sixth parameter, then the behavior
+** is undefined.
+**
 ** ^The sqlite3_bind_zeroblob() routine binds a BLOB of length N that
 ** is filled with zeroes.  ^A zeroblob uses a fixed amount of memory
 ** (just an integer to hold its size) while it is being processed.
 ** Zeroblobs are intended to serve as placeholders for BLOBs whose
 ** content is later written using
 ** [sqlite3_blob_open | incremental BLOB I/O] routines.
 ** ^A negative value for the zeroblob results in a zero-length BLOB.
 **
 ** ^If any of the sqlite3_bind_*() routines are called with a NULL pointer
 ** for the [prepared statement] or with a prepared statement for which
 ** [sqlite3_step()] has been called more recently than [sqlite3_reset()],
 ** then the call will return [SQLITE_MISUSE].  If any sqlite3_bind_()
 ** routine is passed a [prepared statement] that has been finalized, the
 ** result is undefined and probably harmful.
 **
 ** ^Bindings are not cleared by the [sqlite3_reset()] routine.
 ** ^Unbound parameters are interpreted as NULL.
 **
 ** ^The sqlite3_bind_* routines return [SQLITE_OK] on success or an
 ** [error code] if anything goes wrong.
+** ^[SQLITE_TOOBIG] might be returned if the size of a string or BLOB
+** exceeds limits imposed by [sqlite3_limit]([SQLITE_LIMIT_LENGTH]) or
+** [SQLITE_MAX_LENGTH].
 ** ^[SQLITE_RANGE] is returned if the parameter
 ** index is out of range.  ^[SQLITE_NOMEM] is returned if malloc() fails.
 **
 ** See also: [sqlite3_bind_parameter_count()],
 ** [sqlite3_bind_parameter_name()], and [sqlite3_bind_parameter_index()].
 */
 SQLITE_API int sqlite3_bind_blob(sqlite3_stmt*, int, const void*, int n, void(*)(void*));
+SQLITE_API int sqlite3_bind_blob64(sqlite3_stmt*, int, const void*, sqlite3_uint64,
+                        void(*)(void*));
 SQLITE_API int sqlite3_bind_double(sqlite3_stmt*, int, double);
 SQLITE_API int sqlite3_bind_int(sqlite3_stmt*, int, int);
 SQLITE_API int sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64);
 SQLITE_API int sqlite3_bind_null(sqlite3_stmt*, int);
-SQLITE_API int sqlite3_bind_text(sqlite3_stmt*, int, const char*, int n, void(*)(void*));
+SQLITE_API int sqlite3_bind_text(sqlite3_stmt*,int,const char*,int,void(*)(void*));
 SQLITE_API int sqlite3_bind_text16(sqlite3_stmt*, int, const void*, int, void(*)(void*));
+SQLITE_API int sqlite3_bind_text64(sqlite3_stmt*, int, const char*, sqlite3_uint64,
+                         void(*)(void*), unsigned char encoding);
 SQLITE_API int sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*);
 SQLITE_API int sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n);
 
 /*
 ** CAPI3REF: Number Of SQL Parameters
 **
 ** ^This routine can be used to find the number of [SQL parameters]
 ** in a [prepared statement].  SQL parameters are tokens of the
 ** form "?", "?NNN", ":AAA", "$AAA", or "@AAA" that serve as
 ** placeholders for values that are [sqlite3_bind_blob | bound]
@@ skipping 202 matching lines @@
 ** interface will continue to be supported.
 **
 ** ^In the legacy interface, the return value will be either [SQLITE_BUSY],
 ** [SQLITE_DONE], [SQLITE_ROW], [SQLITE_ERROR], or [SQLITE_MISUSE].
 ** ^With the "v2" interface, any of the other [result codes] or
 ** [extended result codes] might be returned as well.
 **
 ** ^[SQLITE_BUSY] means that the database engine was unable to acquire the
 ** database locks it needs to do its job.  ^If the statement is a [COMMIT]
 ** or occurs outside of an explicit transaction, then you can retry the
-** statement.  If the statement is not a [COMMIT] and occurs within a
+** statement.  If the statement is not a [COMMIT] and occurs within an
 ** explicit transaction then you should rollback the transaction before
 ** continuing.
 **
 ** ^[SQLITE_DONE] means that the statement has finished executing
 ** successfully.  sqlite3_step() should not be called again on this virtual
 ** machine without first calling [sqlite3_reset()] to reset the virtual
 ** machine back to its initial state.
 **
 ** ^If the SQL statement being executed returns any data, then [SQLITE_ROW]
 ** is returned each time a new row of data is ready for processing by the
@@ skipping 44 matching lines @@
 
 /*
 ** CAPI3REF: Number of columns in a result set
 **
 ** ^The sqlite3_data_count(P) interface returns the number of columns in the
 ** current row of the result set of [prepared statement] P.
 ** ^If prepared statement P does not have results ready to return
 ** (via calls to the [sqlite3_column_int | sqlite3_column_*()] of
 ** interfaces) then sqlite3_data_count(P) returns 0.
 ** ^The sqlite3_data_count(P) routine also returns 0 if P is a NULL pointer.
+** ^The sqlite3_data_count(P) routine returns 0 if the previous call to
+** [sqlite3_step](P) returned [SQLITE_DONE].  ^The sqlite3_data_count(P)
+** will return non-zero if previous call to [sqlite3_step](P) returned
+** [SQLITE_ROW], except in the case of the [PRAGMA incremental_vacuum]
+** where it always returns zero since each step of that multi-step
+** pragma returns 0 columns of data.
 **
 ** See also: [sqlite3_column_count()]
 */
 SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Fundamental Datatypes
 ** KEYWORDS: SQLITE_TEXT
 **
 ** ^(Every value in SQLite has one of five fundamental datatypes:
@@ skipping 79 matching lines @@
 ** the number of bytes in that string.
 ** ^If the result is NULL, then sqlite3_column_bytes16() returns zero.
 **
 ** ^The values returned by [sqlite3_column_bytes()] and 
 ** [sqlite3_column_bytes16()] do not include the zero terminators at the end
 ** of the string.  ^For clarity: the values returned by
 ** [sqlite3_column_bytes()] and [sqlite3_column_bytes16()] are the number of
 ** bytes in the string, not the number of characters.
 **
 ** ^Strings returned by sqlite3_column_text() and sqlite3_column_text16(),
-** even empty strings, are always zero terminated.  ^The return
+** even empty strings, are always zero-terminated.  ^The return
 ** value from sqlite3_column_blob() for a zero-length BLOB is a NULL pointer.
 **
 ** ^The object returned by [sqlite3_column_value()] is an
 ** [unprotected sqlite3_value] object.  An unprotected sqlite3_value object
 ** may only be used with [sqlite3_bind_value()] and [sqlite3_result_value()].
 ** If the [unprotected sqlite3_value] object returned by
 ** [sqlite3_column_value()] is used in any other way, including calls
 ** to routines like [sqlite3_value_int()], [sqlite3_value_text()],
 ** or [sqlite3_value_bytes()], then the behavior is undefined.
 **
 ** These routines attempt to convert the value where appropriate.  ^For
 ** example, if the internal representation is FLOAT and a text result
 ** is requested, [sqlite3_snprintf()] is used internally to perform the
 ** conversion automatically.  ^(The following table details the conversions
 ** that are applied:
 **
 ** <blockquote>
 ** <table border="1">
 ** <tr><th> Internal<br>Type <th> Requested<br>Type <th>  Conversion
 **
 ** <tr><td>  NULL    <td> INTEGER   <td> Result is 0
 ** <tr><td>  NULL    <td>  FLOAT    <td> Result is 0.0
-** <tr><td>  NULL    <td>   TEXT    <td> Result is NULL pointer
-** <tr><td>  NULL    <td>   BLOB    <td> Result is NULL pointer
+** <tr><td>  NULL    <td>   TEXT    <td> Result is a NULL pointer
+** <tr><td>  NULL    <td>   BLOB    <td> Result is a NULL pointer
 ** <tr><td> INTEGER  <td>  FLOAT    <td> Convert from integer to float
 ** <tr><td> INTEGER  <td>   TEXT    <td> ASCII rendering of the integer
 ** <tr><td> INTEGER  <td>   BLOB    <td> Same as INTEGER->TEXT
-** <tr><td>  FLOAT   <td> INTEGER   <td> Convert from float to integer
+** <tr><td>  FLOAT   <td> INTEGER   <td> [CAST] to INTEGER
 ** <tr><td>  FLOAT   <td>   TEXT    <td> ASCII rendering of the float
-** <tr><td>  FLOAT   <td>   BLOB    <td> Same as FLOAT->TEXT
-** <tr><td>  TEXT    <td> INTEGER   <td> Use atoi()
-** <tr><td>  TEXT    <td>  FLOAT    <td> Use atof()
+** <tr><td>  FLOAT   <td>   BLOB    <td> [CAST] to BLOB
+** <tr><td>  TEXT    <td> INTEGER   <td> [CAST] to INTEGER
+** <tr><td>  TEXT    <td>  FLOAT    <td> [CAST] to REAL
 ** <tr><td>  TEXT    <td>   BLOB    <td> No change
-** <tr><td>  BLOB    <td> INTEGER   <td> Convert to TEXT then use atoi()
-** <tr><td>  BLOB    <td>  FLOAT    <td> Convert to TEXT then use atof()
+** <tr><td>  BLOB    <td> INTEGER   <td> [CAST] to INTEGER
+** <tr><td>  BLOB    <td>  FLOAT    <td> [CAST] to REAL
 ** <tr><td>  BLOB    <td>   TEXT    <td> Add a zero terminator if needed
 ** </table>
 ** </blockquote>)^
 **
 ** The table above makes reference to standard C library functions atoi()
 ** and atof().  SQLite does not really use these functions.  It has its
 ** own equivalent internal routines.  The atoi() and atof() names are
 ** used in the table for brevity and because they are familiar to most
 ** C programmers.
 **
@@ skipping 35 matching lines @@
 ** into the desired format, then invoke sqlite3_column_bytes() or
 ** sqlite3_column_bytes16() to find the size of the result.  Do not mix calls
 ** to sqlite3_column_text() or sqlite3_column_blob() with calls to
 ** sqlite3_column_bytes16(), and do not mix calls to sqlite3_column_text16()
 ** with calls to sqlite3_column_bytes().
 **
 ** ^The pointers returned are valid until a type conversion occurs as
 ** described above, or until [sqlite3_step()] or [sqlite3_reset()] or
 ** [sqlite3_finalize()] is called.  ^The memory space used to hold strings
 ** and BLOBs is freed automatically.  Do <b>not</b> pass the pointers returned
-** [sqlite3_column_blob()], [sqlite3_column_text()], etc. into
+** from [sqlite3_column_blob()], [sqlite3_column_text()], etc. into
 ** [sqlite3_free()].
 **
 ** ^(If a memory allocation error occurs during the evaluation of any
 ** of these routines, a default value is returned.  The default value
 ** is either the integer 0, the floating point number 0.0, or a NULL
 ** pointer.  Subsequent calls to [sqlite3_errcode()] will return
 ** [SQLITE_NOMEM].)^
 */
 SQLITE_API const void *sqlite3_column_blob(sqlite3_stmt*, int iCol);
 SQLITE_API int sqlite3_column_bytes(sqlite3_stmt*, int iCol);
 SQLITE_API int sqlite3_column_bytes16(sqlite3_stmt*, int iCol);
 SQLITE_API double sqlite3_column_double(sqlite3_stmt*, int iCol);
 SQLITE_API int sqlite3_column_int(sqlite3_stmt*, int iCol);
 SQLITE_API sqlite3_int64 sqlite3_column_int64(sqlite3_stmt*, int iCol);
 SQLITE_API const unsigned char *sqlite3_column_text(sqlite3_stmt*, int iCol);
 SQLITE_API const void *sqlite3_column_text16(sqlite3_stmt*, int iCol);
 SQLITE_API int sqlite3_column_type(sqlite3_stmt*, int iCol);
 SQLITE_API sqlite3_value *sqlite3_column_value(sqlite3_stmt*, int iCol);
 
 /*
 ** CAPI3REF: Destroy A Prepared Statement Object
 **
 ** ^The sqlite3_finalize() function is called to delete a [prepared statement].
-** ^If the most recent evaluation of the statement encountered no errors or
+** ^If the most recent evaluation of the statement encountered no errors
 ** or if the statement is never been evaluated, then sqlite3_finalize() returns
 ** SQLITE_OK.  ^If the most recent evaluation of statement S failed, then
 ** sqlite3_finalize(S) returns the appropriate [error code] or
 ** [extended error code].
 **
 ** ^The sqlite3_finalize(S) routine can be called at any point during
 ** the life cycle of [prepared statement] S:
 ** before statement S is ever evaluated, after
 ** one or more calls to [sqlite3_reset()], or after any call
 ** to [sqlite3_step()] regardless of whether or not the statement has
@@ skipping 64 matching lines @@
 ** ^The third parameter (nArg)
 ** is the number of arguments that the SQL function or
 ** aggregate takes. ^If this parameter is -1, then the SQL function or
 ** aggregate may take any number of arguments between 0 and the limit
 ** set by [sqlite3_limit]([SQLITE_LIMIT_FUNCTION_ARG]).  If the third
 ** parameter is less than -1 or greater than 127 then the behavior is
 ** undefined.
 **
 ** ^The fourth parameter, eTextRep, specifies what
 ** [SQLITE_UTF8 | text encoding] this SQL function prefers for
-** its parameters.  Every SQL function implementation must be able to work
-** with UTF-8, UTF-16le, or UTF-16be.  But some implementations may be
-** more efficient with one encoding than another.  ^An application may
-** invoke sqlite3_create_function() or sqlite3_create_function16() multiple
-** times with the same function but with different values of eTextRep.
+** its parameters.  The application should set this parameter to
+** [SQLITE_UTF16LE] if the function implementation invokes 
+** [sqlite3_value_text16le()] on an input, or [SQLITE_UTF16BE] if the
+** implementation invokes [sqlite3_value_text16be()] on an input, or
+** [SQLITE_UTF16] if [sqlite3_value_text16()] is used, or [SQLITE_UTF8]
+** otherwise.  ^The same SQL function may be registered multiple times using
+** different preferred text encodings, with different implementations for
+** each encoding.
 ** ^When multiple implementations of the same function are available, SQLite
 ** will pick the one that involves the least amount of data conversion.
-** If there is only a single implementation which does not care what text
-** encoding is used, then the fourth argument should be [SQLITE_ANY].
+**
+** ^The fourth parameter may optionally be ORed with [SQLITE_DETERMINISTIC]
+** to signal that the function will always return the same result given
+** the same inputs within a single SQL statement.  Most SQL functions are
+** deterministic.  The built-in [random()] SQL function is an example of a
+** function that is not deterministic.  The SQLite query planner is able to
+** perform additional optimizations on deterministic functions, so use
+** of the [SQLITE_DETERMINISTIC] flag is recommended where possible.
 **
 ** ^(The fifth parameter is an arbitrary pointer.  The implementation of the
 ** function can gain access to this pointer using [sqlite3_user_data()].)^
 **
 ** ^The sixth, seventh and eighth parameters, xFunc, xStep and xFinal, are
 ** pointers to C-language functions that implement the SQL function or
 ** aggregate. ^A scalar SQL function requires an implementation of the xFunc
 ** callback only; NULL pointers must be passed as the xStep and xFinal
 ** parameters. ^An aggregate SQL function requires an implementation of xStep
 ** and xFinal and NULL pointer must be passed for xFunc. ^To delete an existing
@@ skipping 65 matching lines @@
 /*
 ** CAPI3REF: Text Encodings
 **
 ** These constant define integer codes that represent the various
 ** text encodings supported by SQLite.
 */
 #define SQLITE_UTF8           1
 #define SQLITE_UTF16LE        2
 #define SQLITE_UTF16BE        3
 #define SQLITE_UTF16          4    /* Use native byte order */
-#define SQLITE_ANY            5    /* sqlite3_create_function only */
+#define SQLITE_ANY            5    /* Deprecated */
 #define SQLITE_UTF16_ALIGNED  8    /* sqlite3_create_collation only */
 
 /*
+** CAPI3REF: Function Flags
+**
+** These constants may be ORed together with the 
+** [SQLITE_UTF8 | preferred text encoding] as the fourth argument
+** to [sqlite3_create_function()], [sqlite3_create_function16()], or
+** [sqlite3_create_function_v2()].
+*/
+#define SQLITE_DETERMINISTIC    0x800
+
+/*
 ** CAPI3REF: Deprecated Functions
 ** DEPRECATED
 **
 ** These functions are [deprecated].  In order to maintain
 ** backwards compatibility with older code, these functions continue 
 ** to be supported.  However, new applications should avoid
 ** the use of these functions.  To help encourage people to avoid
 ** using these functions, we are not going to tell you what they do.
 */
 #ifndef SQLITE_OMIT_DEPRECATED
 SQLITE_API SQLITE_DEPRECATED int sqlite3_aggregate_count(sqlite3_context*);
 SQLITE_API SQLITE_DEPRECATED int sqlite3_expired(sqlite3_stmt*);
 SQLITE_API SQLITE_DEPRECATED int sqlite3_transfer_bindings(sqlite3_stmt*, sqlite3_stmt*);
 SQLITE_API SQLITE_DEPRECATED int sqlite3_global_recover(void);
 SQLITE_API SQLITE_DEPRECATED void sqlite3_thread_cleanup(void);
-SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int),void*,sqlite3_int64);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int),
+                      void*,sqlite3_int64);
 #endif
 
 /*
 ** CAPI3REF: Obtaining SQL Function Parameter Values
 **
 ** The C-language implementation of SQL functions and aggregates uses
 ** this set of interface routines to access the parameter values on
 ** the function or aggregate.
 **
 ** The xFunc (for scalar functions) or xStep (for aggregates) parameters
 ** to [sqlite3_create_function()] and [sqlite3_create_function16()]
 ** define callbacks that implement the SQL functions and aggregates.
 ** The 3rd parameter to these callbacks is an array of pointers to
 ** [protected sqlite3_value] objects.  There is one [sqlite3_value] object for
 ** each parameter to the SQL function.  These routines are used to
 ** extract values from the [sqlite3_value] objects.
 **
 ** These routines work only with [protected sqlite3_value] objects.
 ** Any attempt to use these routines on an [unprotected sqlite3_value]
 ** object results in undefined behavior.
 **
 ** ^These routines work just like the corresponding [column access functions]
-** except that  these routines take a single [protected sqlite3_value] object
+** except that these routines take a single [protected sqlite3_value] object
 ** pointer instead of a [sqlite3_stmt*] pointer and an integer column number.
 **
 ** ^The sqlite3_value_text16() interface extracts a UTF-16 string
 ** in the native byte-order of the host machine.  ^The
 ** sqlite3_value_text16be() and sqlite3_value_text16le() interfaces
 ** extract UTF-16 strings as big-endian and little-endian respectively.
 **
 ** ^(The sqlite3_value_numeric_type() interface attempts to apply
 ** numeric affinity to the value.  This means that an attempt is
 ** made to convert the value to an integer or floating point.  If
@@ skipping 36 matching lines @@
 ** to the new memory. ^On second and subsequent calls to
 ** sqlite3_aggregate_context() for the same aggregate function instance,
 ** the same buffer is returned.  Sqlite3_aggregate_context() is normally
 ** called once for each invocation of the xStep callback and then one
 ** last time when the xFinal callback is invoked.  ^(When no rows match
 ** an aggregate query, the xStep() callback of the aggregate function
 ** implementation is never called and xFinal() is called exactly once.
 ** In those cases, sqlite3_aggregate_context() might be called for the
 ** first time from within xFinal().)^
 **
-** ^The sqlite3_aggregate_context(C,N) routine returns a NULL pointer if N is
-** less than or equal to zero or if a memory allocate error occurs.
+** ^The sqlite3_aggregate_context(C,N) routine returns a NULL pointer 
+** when first called if N is less than or equal to zero or if a memory
+** allocate error occurs.
 **
 ** ^(The amount of space allocated by sqlite3_aggregate_context(C,N) is
 ** determined by the N parameter on first successful call.  Changing the
 ** value of N in subsequent call to sqlite3_aggregate_context() within
 ** the same aggregate function instance will not resize the memory
-** allocation.)^
+** allocation.)^  Within the xFinal callback, it is customary to set
+** N=0 in calls to sqlite3_aggregate_context(C,N) so that no 
+** pointless memory allocations occur.
 **
 ** ^SQLite automatically frees the memory allocated by 
 ** sqlite3_aggregate_context() when the aggregate query concludes.
 **
 ** The first parameter must be a copy of the
 ** [sqlite3_context | SQL function context] that is the first parameter
 ** to the xStep or xFinal callback routine that implements the aggregate
 ** function.
 **
 ** This routine must be called from the same thread in which
@@ skipping 22 matching lines @@
 ** the pointer to the [database connection] (the 1st parameter)
 ** of the [sqlite3_create_function()]
 ** and [sqlite3_create_function16()] routines that originally
 ** registered the application defined function.
 */
 SQLITE_API sqlite3 *sqlite3_context_db_handle(sqlite3_context*);
 
 /*
 ** CAPI3REF: Function Auxiliary Data
 **
-** The following two functions may be used by scalar SQL functions to
+** These functions may be used by (non-aggregate) SQL functions to
 ** associate metadata with argument values. If the same value is passed to
 ** multiple invocations of the same SQL function during query execution, under
-** some circumstances the associated metadata may be preserved. This may
-** be used, for example, to add a regular-expression matching scalar
-** function. The compiled version of the regular expression is stored as
-** metadata associated with the SQL value passed as the regular expression
-** pattern.  The compiled regular expression can be reused on multiple
-** invocations of the same function so that the original pattern string
-** does not need to be recompiled on each invocation.
+** some circumstances the associated metadata may be preserved.  An example
+** of where this might be useful is in a regular-expression matching
+** function. The compiled version of the regular expression can be stored as
+** metadata associated with the pattern string.  
+** Then as long as the pattern string remains the same,
+** the compiled regular expression can be reused on multiple
+** invocations of the same function.
 **
 ** ^The sqlite3_get_auxdata() interface returns a pointer to the metadata
 ** associated by the sqlite3_set_auxdata() function with the Nth argument
-** value to the application-defined function. ^If no metadata has been ever
-** been set for the Nth argument of the function, or if the corresponding
-** function parameter has changed since the meta-data was set,
-** then sqlite3_get_auxdata() returns a NULL pointer.
+** value to the application-defined function. ^If there is no metadata
+** associated with the function argument, this sqlite3_get_auxdata() interface
+** returns a NULL pointer.
 **
-** ^The sqlite3_set_auxdata() interface saves the metadata
-** pointed to by its 3rd parameter as the metadata for the N-th
-** argument of the application-defined function.  Subsequent
-** calls to sqlite3_get_auxdata() might return this data, if it has
-** not been destroyed.
-** ^If it is not NULL, SQLite will invoke the destructor
-** function given by the 4th parameter to sqlite3_set_auxdata() on
-** the metadata when the corresponding function parameter changes
-** or when the SQL statement completes, whichever comes first.
+** ^The sqlite3_set_auxdata(C,N,P,X) interface saves P as metadata for the N-th
+** argument of the application-defined function.  ^Subsequent
+** calls to sqlite3_get_auxdata(C,N) return P from the most recent
+** sqlite3_set_auxdata(C,N,P,X) call if the metadata is still valid or
+** NULL if the metadata has been discarded.
+** ^After each call to sqlite3_set_auxdata(C,N,P,X) where X is not NULL,
+** SQLite will invoke the destructor function X with parameter P exactly
+** once, when the metadata is discarded.
+** SQLite is free to discard the metadata at any time, including: <ul>
+** <li> when the corresponding function parameter changes, or
+** <li> when [sqlite3_reset()] or [sqlite3_finalize()] is called for the
+**      SQL statement, or
+** <li> when sqlite3_set_auxdata() is invoked again on the same parameter, or
+** <li> during the original sqlite3_set_auxdata() call when a memory 
+**      allocation error occurs. </ul>)^
 **
-** SQLite is free to call the destructor and drop metadata on any
-** parameter of any function at any time.  ^The only guarantee is that
-** the destructor will be called before the metadata is dropped.
+** Note the last bullet in particular.  The destructor X in 
+** sqlite3_set_auxdata(C,N,P,X) might be called immediately, before the
+** sqlite3_set_auxdata() interface even returns.  Hence sqlite3_set_auxdata()
+** should be called near the end of the function implementation and the
+** function implementation should not make any use of P after
+** sqlite3_set_auxdata() has been called.
 **
 ** ^(In practice, metadata is preserved between function calls for
-** expressions that are constant at compile time. This includes literal
-** values and [parameters].)^
+** function parameters that are compile-time constants, including literal
+** values and [parameters] and expressions composed from the same.)^
 **
 ** These routines must be called from the same thread in which
 ** the SQL function is running.
 */
 SQLITE_API void *sqlite3_get_auxdata(sqlite3_context*, int N);
 SQLITE_API void sqlite3_set_auxdata(sqlite3_context*, int N, void*, void (*)(void*));
 
 
 /*
 ** CAPI3REF: Constants Defining Special Destructor Behavior
 **
 ** These are special values for the destructor that is passed in as the
 ** final argument to routines like [sqlite3_result_blob()].  ^If the destructor
 ** argument is SQLITE_STATIC, it means that the content pointer is constant
 ** and will never change.  It does not need to be destroyed.  ^The
 ** SQLITE_TRANSIENT value means that the content will likely change in
 ** the near future and that SQLite should make its own private copy of
 ** the content before returning.
 **
 ** The typedef is necessary to work around problems in certain
-** C++ compilers.  See ticket #2191.
+** C++ compilers.
 */
 typedef void (*sqlite3_destructor_type)(void*);
 #define SQLITE_STATIC      ((sqlite3_destructor_type)0)
 #define SQLITE_TRANSIENT   ((sqlite3_destructor_type)-1)
 
 /*
 ** CAPI3REF: Setting The Result Of An SQL Function
 **
 ** These routines are used by the xFunc or xFinal callbacks that
 ** implement SQL functions and aggregates.  See
@@ skipping 32 matching lines @@
 ** bytes (not characters) from the 2nd parameter as the error message.
 ** ^The sqlite3_result_error() and sqlite3_result_error16()
 ** routines make a private copy of the error message text before
 ** they return.  Hence, the calling function can deallocate or
 ** modify the text after they return without harm.
 ** ^The sqlite3_result_error_code() function changes the error code
 ** returned by SQLite as a result of an error in a function.  ^By default,
 ** the error code is SQLITE_ERROR.  ^A subsequent call to sqlite3_result_error()
 ** or sqlite3_result_error16() resets the error code to SQLITE_ERROR.
 **
-** ^The sqlite3_result_toobig() interface causes SQLite to throw an error
-** indicating that a string or BLOB is too long to represent.
+** ^The sqlite3_result_error_toobig() interface causes SQLite to throw an
+** error indicating that a string or BLOB is too long to represent.
 **
-** ^The sqlite3_result_nomem() interface causes SQLite to throw an error
-** indicating that a memory allocation failed.
+** ^The sqlite3_result_error_nomem() interface causes SQLite to throw an
+** error indicating that a memory allocation failed.
 **
 ** ^The sqlite3_result_int() interface sets the return value
 ** of the application-defined function to be the 32-bit signed integer
 ** value given in the 2nd argument.
 ** ^The sqlite3_result_int64() interface sets the return value
 ** of the application-defined function to be the 64-bit signed integer
 ** value given in the 2nd argument.
 **
 ** ^The sqlite3_result_null() interface sets the return value
 ** of the application-defined function to be NULL.
 **
 ** ^The sqlite3_result_text(), sqlite3_result_text16(),
 ** sqlite3_result_text16le(), and sqlite3_result_text16be() interfaces
 ** set the return value of the application-defined function to be
 ** a text string which is represented as UTF-8, UTF-16 native byte order,
 ** UTF-16 little endian, or UTF-16 big endian, respectively.
+** ^The sqlite3_result_text64() interface sets the return value of an
+** application-defined function to be a text string in an encoding
+** specified by the fifth (and last) parameter, which must be one
+** of [SQLITE_UTF8], [SQLITE_UTF16], [SQLITE_UTF16BE], or [SQLITE_UTF16LE].
 ** ^SQLite takes the text result from the application from
 ** the 2nd parameter of the sqlite3_result_text* interfaces.
 ** ^If the 3rd parameter to the sqlite3_result_text* interfaces
 ** is negative, then SQLite takes result text from the 2nd parameter
 ** through the first zero character.
 ** ^If the 3rd parameter to the sqlite3_result_text* interfaces
 ** is non-negative, then as many bytes (not characters) of the text
 ** pointed to by the 2nd parameter are taken as the application-defined
-** function result.
+** function result.  If the 3rd parameter is non-negative, then it
+** must be the byte offset into the string where the NUL terminator would
+** appear if the string where NUL terminated.  If any NUL characters occur
+** in the string at a byte offset that is less than the value of the 3rd
+** parameter, then the resulting string will contain embedded NULs and the
+** result of expressions operating on strings with embedded NULs is undefined.
 ** ^If the 4th parameter to the sqlite3_result_text* interfaces
 ** or sqlite3_result_blob is a non-NULL pointer, then SQLite calls that
 ** function as the destructor on the text or BLOB result when it has
 ** finished using that result.
 ** ^If the 4th parameter to the sqlite3_result_text* interfaces or to
 ** sqlite3_result_blob is the special constant SQLITE_STATIC, then SQLite
 ** assumes that the text or BLOB result is in constant space and does not
 ** copy the content of the parameter nor call a destructor on the content
 ** when it has finished using that result.
 ** ^If the 4th parameter to the sqlite3_result_text* interfaces
 ** or sqlite3_result_blob is the special constant SQLITE_TRANSIENT
 ** then SQLite makes a copy of the result into space obtained from
 ** from [sqlite3_malloc()] before it returns.
 **
 ** ^The sqlite3_result_value() interface sets the result of
 ** the application-defined function to be a copy the
 ** [unprotected sqlite3_value] object specified by the 2nd parameter.  ^The
 ** sqlite3_result_value() interface makes a copy of the [sqlite3_value]
 ** so that the [sqlite3_value] specified in the parameter may change or
 ** be deallocated after sqlite3_result_value() returns without harm.
 ** ^A [protected sqlite3_value] object may always be used where an
 ** [unprotected sqlite3_value] object is required, so either
 ** kind of [sqlite3_value] object can be used with this interface.
 **
 ** If these routines are called from within the different thread
 ** than the one containing the application-defined function that received
 ** the [sqlite3_context] pointer, the results are undefined.
 */
 SQLITE_API void sqlite3_result_blob(sqlite3_context*, const void*, int, void(*)(void*));
+SQLITE_API void sqlite3_result_blob64(sqlite3_context*,const void*,sqlite3_uint64,void(*)(void*));
 SQLITE_API void sqlite3_result_double(sqlite3_context*, double);
 SQLITE_API void sqlite3_result_error(sqlite3_context*, const char*, int);
 SQLITE_API void sqlite3_result_error16(sqlite3_context*, const void*, int);
 SQLITE_API void sqlite3_result_error_toobig(sqlite3_context*);
 SQLITE_API void sqlite3_result_error_nomem(sqlite3_context*);
 SQLITE_API void sqlite3_result_error_code(sqlite3_context*, int);
 SQLITE_API void sqlite3_result_int(sqlite3_context*, int);
 SQLITE_API void sqlite3_result_int64(sqlite3_context*, sqlite3_int64);
 SQLITE_API void sqlite3_result_null(sqlite3_context*);
 SQLITE_API void sqlite3_result_text(sqlite3_context*, const char*, int, void(*)(void*));
+SQLITE_API void sqlite3_result_text64(sqlite3_context*, const char*,sqlite3_uint64,
+                           void(*)(void*), unsigned char encoding);
 SQLITE_API void sqlite3_result_text16(sqlite3_context*, const void*, int, void(*)(void*));
 SQLITE_API void sqlite3_result_text16le(sqlite3_context*, const void*, int,void(*)(void*));
 SQLITE_API void sqlite3_result_text16be(sqlite3_context*, const void*, int,void(*)(void*));
 SQLITE_API void sqlite3_result_value(sqlite3_context*, sqlite3_value*);
 SQLITE_API void sqlite3_result_zeroblob(sqlite3_context*, int n);
 
 /*
 ** CAPI3REF: Define New Collating Sequences
 **
 ** ^These functions add, remove, or modify a [collation] associated
@@ skipping 137 matching lines @@
 ** Specify the key for an encrypted database.  This routine should be
 ** called right after sqlite3_open().
 **
 ** The code to implement this API is not available in the public release
 ** of SQLite.
 */
 SQLITE_API int sqlite3_key(
   sqlite3 *db,                   /* Database to be rekeyed */
   const void *pKey, int nKey     /* The key */
 );
+SQLITE_API int sqlite3_key_v2(
+  sqlite3 *db,                   /* Database to be rekeyed */
+  const char *zDbName,           /* Name of the database */
+  const void *pKey, int nKey     /* The key */
+);
 
 /*
 ** Change the key on an open database.  If the current database is not
 ** encrypted, this routine will encrypt it.  If pNew==0 or nNew==0, the
 ** database is decrypted.
 **
 ** The code to implement this API is not available in the public release
 ** of SQLite.
 */
 SQLITE_API int sqlite3_rekey(
   sqlite3 *db,                   /* Database to be rekeyed */
   const void *pKey, int nKey     /* The new key */
 );
+SQLITE_API int sqlite3_rekey_v2(
+  sqlite3 *db,                   /* Database to be rekeyed */
+  const char *zDbName,           /* Name of the database */
+  const void *pKey, int nKey     /* The new key */
+);
 
 /*
 ** Specify the activation key for a SEE database.  Unless 
 ** activated, none of the SEE routines will work.
 */
 SQLITE_API void sqlite3_activate_see(
   const char *zPassPhrase        /* Activation phrase */
 );
 #endif
 
@@ skipping 29 matching lines @@
 /*
 ** CAPI3REF: Name Of The Folder Holding Temporary Files
 **
 ** ^(If this global variable is made to point to a string which is
 ** the name of a folder (a.k.a. directory), then all temporary files
 ** created by SQLite when using a built-in [sqlite3_vfs | VFS]
 ** will be placed in that directory.)^  ^If this variable
 ** is a NULL pointer, then SQLite performs a search for an appropriate
 ** temporary file directory.
 **
+** Applications are strongly discouraged from using this global variable.
+** It is required to set a temporary folder on Windows Runtime (WinRT).
+** But for all other platforms, it is highly recommended that applications
+** neither read nor write this variable.  This global variable is a relic
+** that exists for backwards compatibility of legacy applications and should
+** be avoided in new projects.
+**
 ** It is not safe to read or modify this variable in more than one
 ** thread at a time.  It is not safe to read or modify this variable
 ** if a [database connection] is being used at the same time in a separate
 ** thread.
 ** It is intended that this variable be set once
 ** as part of process initialization and before any SQLite interface
 ** routines have been called and that this variable remain unchanged
 ** thereafter.
 **
 ** ^The [temp_store_directory pragma] may modify this variable and cause
 ** it to point to memory obtained from [sqlite3_malloc].  ^Furthermore,
 ** the [temp_store_directory pragma] always assumes that any string
 ** that this variable points to is held in memory obtained from 
 ** [sqlite3_malloc] and the pragma may attempt to free that memory
 ** using [sqlite3_free].
 ** Hence, if this variable is modified directly, either it should be
 ** made NULL or made to point to memory obtained from [sqlite3_malloc]
 ** or else the use of the [temp_store_directory pragma] should be avoided.
+** Except when requested by the [temp_store_directory pragma], SQLite
+** does not free the memory that sqlite3_temp_directory points to.  If
+** the application wants that memory to be freed, it must do
+** so itself, taking care to only do so after all [database connection]
+** objects have been destroyed.
+**
+** <b>Note to Windows Runtime users:</b>  The temporary directory must be set
+** prior to calling [sqlite3_open] or [sqlite3_open_v2].  Otherwise, various
+** features that require the use of temporary files may fail.  Here is an
+** example of how to do this using C++ with the Windows Runtime:
+**
+** <blockquote><pre>
+** LPCWSTR zPath = Windows::Storage::ApplicationData::Current->
+** &nbsp;     TemporaryFolder->Path->Data();
+** char zPathBuf&#91;MAX_PATH + 1&#93;;
+** memset(zPathBuf, 0, sizeof(zPathBuf));
+** WideCharToMultiByte(CP_UTF8, 0, zPath, -1, zPathBuf, sizeof(zPathBuf),
+** &nbsp;     NULL, NULL);
+** sqlite3_temp_directory = sqlite3_mprintf("%s", zPathBuf);
+** </pre></blockquote>
 */
 SQLITE_API SQLITE_EXTERN char *sqlite3_temp_directory;
 
 /*
+** CAPI3REF: Name Of The Folder Holding Database Files
+**
+** ^(If this global variable is made to point to a string which is
+** the name of a folder (a.k.a. directory), then all database files
+** specified with a relative pathname and created or accessed by
+** SQLite when using a built-in windows [sqlite3_vfs | VFS] will be assumed
+** to be relative to that directory.)^ ^If this variable is a NULL
+** pointer, then SQLite assumes that all database files specified
+** with a relative pathname are relative to the current directory
+** for the process.  Only the windows VFS makes use of this global
+** variable; it is ignored by the unix VFS.
+**
+** Changing the value of this variable while a database connection is
+** open can result in a corrupt database.
+**
+** It is not safe to read or modify this variable in more than one
+** thread at a time.  It is not safe to read or modify this variable
+** if a [database connection] is being used at the same time in a separate
+** thread.
+** It is intended that this variable be set once
+** as part of process initialization and before any SQLite interface
+** routines have been called and that this variable remain unchanged
+** thereafter.
+**
+** ^The [data_store_directory pragma] may modify this variable and cause
+** it to point to memory obtained from [sqlite3_malloc].  ^Furthermore,
+** the [data_store_directory pragma] always assumes that any string
+** that this variable points to is held in memory obtained from 
+** [sqlite3_malloc] and the pragma may attempt to free that memory
+** using [sqlite3_free].
+** Hence, if this variable is modified directly, either it should be
+** made NULL or made to point to memory obtained from [sqlite3_malloc]
+** or else the use of the [data_store_directory pragma] should be avoided.
+*/
+SQLITE_API SQLITE_EXTERN char *sqlite3_data_directory;
+
+/*
 ** CAPI3REF: Test For Auto-Commit Mode
 ** KEYWORDS: {autocommit mode}
 **
 ** ^The sqlite3_get_autocommit() interface returns non-zero or
 ** zero if the given database connection is or is not in autocommit mode,
 ** respectively.  ^Autocommit mode is on by default.
 ** ^Autocommit mode is disabled by a [BEGIN] statement.
 ** ^Autocommit mode is re-enabled by a [COMMIT] or [ROLLBACK].
 **
 ** If certain kinds of errors occur on a statement within a multi-statement
@@ skipping 15 matching lines @@
 ** ^The sqlite3_db_handle interface returns the [database connection] handle
 ** to which a [prepared statement] belongs.  ^The [database connection]
 ** returned by sqlite3_db_handle is the same [database connection]
 ** that was the first argument
 ** to the [sqlite3_prepare_v2()] call (or its variants) that was used to
 ** create the statement in the first place.
 */
 SQLITE_API sqlite3 *sqlite3_db_handle(sqlite3_stmt*);
 
 /*
+** CAPI3REF: Return The Filename For A Database Connection
+**
+** ^The sqlite3_db_filename(D,N) interface returns a pointer to a filename
+** associated with database N of connection D.  ^The main database file
+** has the name "main".  If there is no attached database N on the database
+** connection D, or if database N is a temporary or in-memory database, then
+** a NULL pointer is returned.
+**
+** ^The filename returned by this function is the output of the
+** xFullPathname method of the [VFS].  ^In other words, the filename
+** will be an absolute pathname, even if the filename used
+** to open the database originally was a URI or relative pathname.
+*/
+SQLITE_API const char *sqlite3_db_filename(sqlite3 *db, const char *zDbName);
+
+/*
+** CAPI3REF: Determine if a database is read-only
+**
+** ^The sqlite3_db_readonly(D,N) interface returns 1 if the database N
+** of connection D is read-only, 0 if it is read/write, or -1 if N is not
+** the name of a database on connection D.
+*/
+SQLITE_API int sqlite3_db_readonly(sqlite3 *db, const char *zDbName);
+
+/*
 ** CAPI3REF: Find the next prepared statement
 **
 ** ^This interface returns a pointer to the next [prepared statement] after
 ** pStmt associated with the [database connection] pDb.  ^If pStmt is NULL
 ** then this interface returns a pointer to the first prepared statement
 ** associated with the database connection pDb.  ^If no prepared statement
 ** satisfies the conditions of this routine, it returns NULL.
 **
 ** The [database connection] pointer D in a call to
 ** [sqlite3_next_stmt(D,S)] must refer to an open database
@@ skipping 14 matching lines @@
 ** for the same database connection is overridden.
 ** ^The pArg argument is passed through to the callback.
 ** ^If the callback on a commit hook function returns non-zero,
 ** then the commit is converted into a rollback.
 **
 ** ^The sqlite3_commit_hook(D,C,P) and sqlite3_rollback_hook(D,C,P) functions
 ** return the P argument from the previous call of the same function
 ** on the same [database connection] D, or NULL for
 ** the first call for each function on D.
 **
+** The commit and rollback hook callbacks are not reentrant.
 ** The callback implementation must not do anything that will modify
 ** the database connection that invoked the callback.  Any actions
 ** to modify the database connection must be deferred until after the
 ** completion of the [sqlite3_step()] call that triggered the commit
 ** or rollback hook in the first place.
-** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their
-** database connections for the meaning of "modify" in this paragraph.
+** Note that running any other SQL statements, including SELECT statements,
+** or merely calling [sqlite3_prepare_v2()] and [sqlite3_step()] will modify
+** the database connections for the meaning of "modify" in this paragraph.
 **
 ** ^Registering a NULL function disables the callback.
 **
 ** ^When the commit hook callback routine returns zero, the [COMMIT]
 ** operation is allowed to continue normally.  ^If the commit hook
 ** returns non-zero, then the [COMMIT] is converted into a [ROLLBACK].
 ** ^The rollback hook is invoked on a rollback that results from a commit
 ** hook returning non-zero, just as it would be with any other rollback.
 **
 ** ^For the purposes of this API, a transaction is said to have been
 ** rolled back if an explicit "ROLLBACK" statement is executed, or
 ** an error or constraint causes an implicit rollback to occur.
 ** ^The rollback callback is not invoked if a transaction is
 ** automatically rolled back because the database connection is closed.
 **
 ** See also the [sqlite3_update_hook()] interface.
 */
 SQLITE_API void *sqlite3_commit_hook(sqlite3*, int(*)(void*), void*);
 SQLITE_API void *sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*);
 
 /*
 ** CAPI3REF: Data Change Notification Callbacks
 **
 ** ^The sqlite3_update_hook() interface registers a callback function
 ** with the [database connection] identified by the first argument
-** to be invoked whenever a row is updated, inserted or deleted.
+** to be invoked whenever a row is updated, inserted or deleted in
+** a rowid table.
 ** ^Any callback set by a previous call to this function
 ** for the same database connection is overridden.
 **
 ** ^The second argument is a pointer to the function to invoke when a
-** row is updated, inserted or deleted.
+** row is updated, inserted or deleted in a rowid table.
 ** ^The first argument to the callback is a copy of the third argument
 ** to sqlite3_update_hook().
 ** ^The second callback argument is one of [SQLITE_INSERT], [SQLITE_DELETE],
 ** or [SQLITE_UPDATE], depending on the operation that caused the callback
 ** to be invoked.
 ** ^The third and fourth arguments to the callback contain pointers to the
 ** database and table name containing the affected row.
 ** ^The final callback parameter is the [rowid] of the row.
 ** ^In the case of an update, this is the [rowid] after the update takes place.
 **
 ** ^(The update hook is not invoked when internal system tables are
 ** modified (i.e. sqlite_master and sqlite_sequence).)^
+** ^The update hook is not invoked when [WITHOUT ROWID] tables are modified.
 **
 ** ^In the current implementation, the update hook
 ** is not invoked when duplication rows are deleted because of an
 ** [ON CONFLICT | ON CONFLICT REPLACE] clause.  ^Nor is the update hook
 ** invoked when rows are deleted using the [truncate optimization].
 ** The exceptions defined in this paragraph might change in a future
 ** release of SQLite.
 **
 ** The update hook implementation must not do anything that will modify
 ** the database connection that invoked the update hook.  Any actions
@@ skipping 11 matching lines @@
 ** interfaces.
 */
 SQLITE_API void *sqlite3_update_hook(
   sqlite3*, 
   void(*)(void *,int ,char const *,char const *,sqlite3_int64),
   void*
 );
 
 /*
 ** CAPI3REF: Enable Or Disable Shared Pager Cache
-** KEYWORDS: {shared cache}
 **
 ** ^(This routine enables or disables the sharing of the database cache
 ** and schema data structures between [database connection | connections]
 ** to the same database. Sharing is enabled if the argument is true
 ** and disabled if the argument is false.)^
 **
 ** ^Cache sharing is enabled and disabled for an entire process.
 ** This is a change as of SQLite version 3.5.0. In prior versions of SQLite,
 ** sharing was enabled or disabled for each thread separately.
 **
 ** ^(The cache sharing mode set by this interface effects all subsequent
 ** calls to [sqlite3_open()], [sqlite3_open_v2()], and [sqlite3_open16()].
 ** Existing database connections continue use the sharing mode
 ** that was in effect at the time they were opened.)^
 **
 ** ^(This routine returns [SQLITE_OK] if shared cache was enabled or disabled
 ** successfully.  An [error code] is returned otherwise.)^
 **
 ** ^Shared cache is disabled by default. But this might change in
 ** future releases of SQLite.  Applications that care about shared
 ** cache setting should set it explicitly.
 **
+** This interface is threadsafe on processors where writing a
+** 32-bit integer is atomic.
+**
 ** See Also:  [SQLite Shared-Cache Mode]
 */
 SQLITE_API int sqlite3_enable_shared_cache(int);
 
 /*
 ** CAPI3REF: Attempt To Free Heap Memory
 **
 ** ^The sqlite3_release_memory() interface attempts to free N bytes
 ** of heap memory by deallocating non-essential memory allocations
 ** held by the database library.   Memory used to cache database
 ** pages to improve performance is an example of non-essential memory.
 ** ^sqlite3_release_memory() returns the number of bytes actually freed,
 ** which might be more or less than the amount requested.
 ** ^The sqlite3_release_memory() routine is a no-op returning zero
 ** if SQLite is not compiled with [SQLITE_ENABLE_MEMORY_MANAGEMENT].
+**
+** See also: [sqlite3_db_release_memory()]
 */
 SQLITE_API int sqlite3_release_memory(int);
 
 /*
+** CAPI3REF: Free Memory Used By A Database Connection
+**
+** ^The sqlite3_db_release_memory(D) interface attempts to free as much heap
+** memory as possible from database connection D. Unlike the
+** [sqlite3_release_memory()] interface, this interface is in effect even
+** when the [SQLITE_ENABLE_MEMORY_MANAGEMENT] compile-time option is
+** omitted.
+**
+** See also: [sqlite3_release_memory()]
+*/
+SQLITE_API int sqlite3_db_release_memory(sqlite3*);
+
+/*
 ** CAPI3REF: Impose A Limit On Heap Size
 **
 ** ^The sqlite3_soft_heap_limit64() interface sets and/or queries the
 ** soft limit on the amount of heap memory that may be allocated by SQLite.
 ** ^SQLite strives to keep heap memory utilization below the soft heap
 ** limit by reducing the number of pages held in the page cache
 ** as heap memory usages approaches the limit.
 ** ^The soft heap limit is "soft" because even though SQLite strives to stay
 ** below the limit, it will exceed the limit rather than generate
 ** an [SQLITE_NOMEM] error.  In other words, the soft heap limit 
 ** is advisory only.
 **
 ** ^The return value from sqlite3_soft_heap_limit64() is the size of
-** the soft heap limit prior to the call.  ^If the argument N is negative
+** the soft heap limit prior to the call, or negative in the case of an
+** error.  ^If the argument N is negative
 ** then no change is made to the soft heap limit.  Hence, the current
 ** size of the soft heap limit can be determined by invoking
 ** sqlite3_soft_heap_limit64() with a negative argument.
 **
 ** ^If the argument N is zero then the soft heap limit is disabled.
 **
 ** ^(The soft heap limit is not enforced in the current implementation
 ** if one or more of following conditions are true:
 **
 ** <ul>
 ** <li> The soft heap limit is set to zero.
 ** <li> Memory accounting is disabled using a combination of the
 **      [sqlite3_config]([SQLITE_CONFIG_MEMSTATUS],...) start-time option and
 **      the [SQLITE_DEFAULT_MEMSTATUS] compile-time option.
 ** <li> An alternative page cache implementation is specified using
-**      [sqlite3_config]([SQLITE_CONFIG_PCACHE],...).
+**      [sqlite3_config]([SQLITE_CONFIG_PCACHE2],...).
 ** <li> The page cache allocates from its own memory pool supplied
 **      by [sqlite3_config]([SQLITE_CONFIG_PAGECACHE],...) rather than
 **      from the heap.
 ** </ul>)^
 **
 ** Beginning with SQLite version 3.7.3, the soft heap limit is enforced
 ** regardless of whether or not the [SQLITE_ENABLE_MEMORY_MANAGEMENT]
 ** compile-time option is invoked.  With [SQLITE_ENABLE_MEMORY_MANAGEMENT],
 ** the soft heap limit is enforced on every memory allocation.  Without
 ** [SQLITE_ENABLE_MEMORY_MANAGEMENT], the soft heap limit is only enforced
@@ skipping 92 matching lines @@
   int *pPrimaryKey,           /* OUTPUT: True if column part of PK */
   int *pAutoinc               /* OUTPUT: True if column is auto-increment */
 );
 
 /*
 ** CAPI3REF: Load An Extension
 **
 ** ^This interface loads an SQLite extension library from the named file.
 **
 ** ^The sqlite3_load_extension() interface attempts to load an
-** SQLite extension library contained in the file zFile.
+** [SQLite extension] library contained in the file zFile.  If
+** the file cannot be loaded directly, attempts are made to load
+** with various operating-system specific extensions added.
+** So for example, if "samplelib" cannot be loaded, then names like
+** "samplelib.so" or "samplelib.dylib" or "samplelib.dll" might
+** be tried also.
 **
 ** ^The entry point is zProc.
-** ^zProc may be 0, in which case the name of the entry point
-** defaults to "sqlite3_extension_init".
+** ^(zProc may be 0, in which case SQLite will try to come up with an
+** entry point name on its own.  It first tries "sqlite3_extension_init".
+** If that does not work, it constructs a name "sqlite3_X_init" where the
+** X is consists of the lower-case equivalent of all ASCII alphabetic
+** characters in the filename from the last "/" to the first following
+** "." and omitting any initial "lib".)^
 ** ^The sqlite3_load_extension() interface returns
 ** [SQLITE_OK] on success and [SQLITE_ERROR] if something goes wrong.
 ** ^If an error occurs and pzErrMsg is not 0, then the
 ** [sqlite3_load_extension()] interface shall attempt to
 ** fill *pzErrMsg with error message text stored in memory
 ** obtained from [sqlite3_malloc()]. The calling function
 ** should free this memory by calling [sqlite3_free()].
 **
 ** ^Extension loading must be enabled using
 ** [sqlite3_enable_load_extension()] prior to calling this API,
 ** otherwise an error will be returned.
 **
 ** See also the [load_extension() SQL function].
 */
 SQLITE_API int sqlite3_load_extension(
   sqlite3 *db,          /* Load the extension into this database connection */
   const char *zFile,    /* Name of the shared library containing extension */
   const char *zProc,    /* Entry point.  Derived from zFile if 0 */
   char **pzErrMsg       /* Put error message here if not 0 */
 );
 
 /*
 ** CAPI3REF: Enable Or Disable Extension Loading
 **
 ** ^So as not to open security holes in older applications that are
-** unprepared to deal with extension loading, and as a means of disabling
-** extension loading while evaluating user-entered SQL, the following API
+** unprepared to deal with [extension loading], and as a means of disabling
+** [extension loading] while evaluating user-entered SQL, the following API
 ** is provided to turn the [sqlite3_load_extension()] mechanism on and off.
 **
-** ^Extension loading is off by default. See ticket #1863.
+** ^Extension loading is off by default.
 ** ^Call the sqlite3_enable_load_extension() routine with onoff==1
 ** to turn extension loading on and call it with onoff==0 to turn
 ** it back off again.
 */
 SQLITE_API int sqlite3_enable_load_extension(sqlite3 *db, int onoff);
 
 /*
 ** CAPI3REF: Automatically Load Statically Linked Extensions
 **
 ** ^This interface causes the xEntryPoint() function to be invoked for
 ** each new [database connection] that is created.  The idea here is that
-** xEntryPoint() is the entry point for a statically linked SQLite extension
+** xEntryPoint() is the entry point for a statically linked [SQLite extension]
 ** that is to be automatically loaded into all new database connections.
 **
 ** ^(Even though the function prototype shows that xEntryPoint() takes
 ** no arguments and returns void, SQLite invokes xEntryPoint() with three
 ** arguments and expects and integer result as if the signature of the
 ** entry point where as follows:
 **
 ** <blockquote><pre>
 ** &nbsp;  int xEntryPoint(
 ** &nbsp;    sqlite3 *db,
 ** &nbsp;    const char **pzErrMsg,
 ** &nbsp;    const struct sqlite3_api_routines *pThunk
 ** &nbsp;  );
 ** </pre></blockquote>)^
 **
 ** If the xEntryPoint routine encounters an error, it should make *pzErrMsg
 ** point to an appropriate error message (obtained from [sqlite3_mprintf()])
 ** and return an appropriate [error code].  ^SQLite ensures that *pzErrMsg
 ** is NULL before calling the xEntryPoint().  ^SQLite will invoke
 ** [sqlite3_free()] on *pzErrMsg after xEntryPoint() returns.  ^If any
 ** xEntryPoint() returns an error, the [sqlite3_open()], [sqlite3_open16()],
 ** or [sqlite3_open_v2()] call that provoked the xEntryPoint() will fail.
 **
 ** ^Calling sqlite3_auto_extension(X) with an entry point X that is already
 ** on the list of automatic extensions is a harmless no-op. ^No entry point
 ** will be called more than once for each database connection that is opened.
 **
-** See also: [sqlite3_reset_auto_extension()].
+** See also: [sqlite3_reset_auto_extension()]
+** and [sqlite3_cancel_auto_extension()]
 */
 SQLITE_API int sqlite3_auto_extension(void (*xEntryPoint)(void));
 
 /*
+** CAPI3REF: Cancel Automatic Extension Loading
+**
+** ^The [sqlite3_cancel_auto_extension(X)] interface unregisters the
+** initialization routine X that was registered using a prior call to
+** [sqlite3_auto_extension(X)].  ^The [sqlite3_cancel_auto_extension(X)]
+** routine returns 1 if initialization routine X was successfully 
+** unregistered and it returns 0 if X was not on the list of initialization
+** routines.
+*/
+SQLITE_API int sqlite3_cancel_auto_extension(void (*xEntryPoint)(void));
+
+/*
 ** CAPI3REF: Reset Automatic Extension Loading
 **
 ** ^This interface disables all automatic extensions previously
 ** registered using [sqlite3_auto_extension()].
 */
 SQLITE_API void sqlite3_reset_auto_extension(void);
 
 /*
 ** The interface to the virtual-table mechanism is currently considered
 ** to be experimental.  The interface might change in incompatible ways.
@@ skipping 48 matching lines @@
   int (*xRowid)(sqlite3_vtab_cursor*, sqlite3_int64 *pRowid);
   int (*xUpdate)(sqlite3_vtab *, int, sqlite3_value **, sqlite3_int64 *);
   int (*xBegin)(sqlite3_vtab *pVTab);
   int (*xSync)(sqlite3_vtab *pVTab);
   int (*xCommit)(sqlite3_vtab *pVTab);
   int (*xRollback)(sqlite3_vtab *pVTab);
   int (*xFindFunction)(sqlite3_vtab *pVtab, int nArg, const char *zName,
                        void (**pxFunc)(sqlite3_context*,int,sqlite3_value**),
                        void **ppArg);
   int (*xRename)(sqlite3_vtab *pVtab, const char *zNew);
+  /* The methods above are in version 1 of the sqlite_module object. Those 
+  ** below are for version 2 and greater. */
+  int (*xSavepoint)(sqlite3_vtab *pVTab, int);
+  int (*xRelease)(sqlite3_vtab *pVTab, int);
+  int (*xRollbackTo)(sqlite3_vtab *pVTab, int);
 };
 
 /*
 ** CAPI3REF: Virtual Table Indexing Information
 ** KEYWORDS: sqlite3_index_info
 **
 ** The sqlite3_index_info structure and its substructures is used as part
 ** of the [virtual table] interface to
 ** pass information into and receive the reply from the [xBestIndex]
 ** method of a [virtual table module].  The fields under **Inputs** are the
@@ skipping 30 matching lines @@
 **
 ** ^The idxNum and idxPtr values are recorded and passed into the
 ** [xFilter] method.
 ** ^[sqlite3_free()] is used to free idxPtr if and only if
 ** needToFreeIdxPtr is true.
 **
 ** ^The orderByConsumed means that output from [xFilter]/[xNext] will occur in
 ** the correct order to satisfy the ORDER BY clause so that no separate
 ** sorting step is required.
 **
-** ^The estimatedCost value is an estimate of the cost of doing the
-** particular lookup.  A full scan of a table with N entries should have
-** a cost of N.  A binary search of a table of N entries should have a
-** cost of approximately log(N).
+** ^The estimatedCost value is an estimate of the cost of a particular
+** strategy. A cost of N indicates that the cost of the strategy is similar
+** to a linear scan of an SQLite table with N rows. A cost of log(N) 
+** indicates that the expense of the operation is similar to that of a
+** binary search on a unique indexed field of an SQLite table with N rows.
+**
+** ^The estimatedRows value is an estimate of the number of rows that
+** will be returned by the strategy.
+**
+** IMPORTANT: The estimatedRows field was added to the sqlite3_index_info
+** structure for SQLite version 3.8.2. If a virtual table extension is
+** used with an SQLite version earlier than 3.8.2, the results of attempting 
+** to read or write the estimatedRows field are undefined (but are likely 
+** to included crashing the application). The estimatedRows field should
+** therefore only be used if [sqlite3_libversion_number()] returns a
+** value greater than or equal to 3008002.
 */
 struct sqlite3_index_info {
   /* Inputs */
   int nConstraint;           /* Number of entries in aConstraint */
   struct sqlite3_index_constraint {
      int iColumn;              /* Column on left-hand side of constraint */
      unsigned char op;         /* Constraint operator */
      unsigned char usable;     /* True if this constraint is usable */
      int iTermOffset;          /* Used internally - xBestIndex should ignore */
   } *aConstraint;            /* Table of WHERE clause constraints */
   int nOrderBy;              /* Number of terms in the ORDER BY clause */
   struct sqlite3_index_orderby {
      int iColumn;              /* Column number */
      unsigned char desc;       /* True for DESC.  False for ASC. */
   } *aOrderBy;               /* The ORDER BY clause */
   /* Outputs */
   struct sqlite3_index_constraint_usage {
     int argvIndex;           /* if >0, constraint is part of argv to xFilter */
     unsigned char omit;      /* Do not code a test for this constraint */
   } *aConstraintUsage;
   int idxNum;                /* Number used to identify the index */
   char *idxStr;              /* String, possibly obtained from sqlite3_malloc */
   int needToFreeIdxStr;      /* Free idxStr using sqlite3_free() if true */
   int orderByConsumed;       /* True if output is already ordered */
-  double estimatedCost;      /* Estimated cost of using this index */
+  double estimatedCost;           /* Estimated cost of using this index */
+  /* Fields below are only available in SQLite 3.8.2 and later */
+  sqlite3_int64 estimatedRows;    /* Estimated number of rows returned */
 };
 
 /*
 ** CAPI3REF: Virtual Table Constraint Operator Codes
 **
 ** These macros defined the allowed values for the
 ** [sqlite3_index_info].aConstraint[].op field.  Each value represents
 ** an operator that is part of a constraint term in the wHERE clause of
 ** a query that uses a [virtual table].
 */
@@ skipping 183 matching lines @@
 ** an expired BLOB handle fail with a return code of [SQLITE_ABORT].
 ** ^(Changes written into a BLOB prior to the BLOB expiring are not
 ** rolled back by the expiration of the BLOB.  Such changes will eventually
 ** commit if the transaction continues to completion.)^
 **
 ** ^Use the [sqlite3_blob_bytes()] interface to determine the size of
 ** the opened blob.  ^The size of a blob may not be changed by this
 ** interface.  Use the [UPDATE] SQL command to change the size of a
 ** blob.
 **
+** ^The [sqlite3_blob_open()] interface will fail for a [WITHOUT ROWID]
+** table.  Incremental BLOB I/O is not possible on [WITHOUT ROWID] tables.
+**
 ** ^The [sqlite3_bind_zeroblob()] and [sqlite3_result_zeroblob()] interfaces
 ** and the built-in [zeroblob] SQL function can be used, if desired,
 ** to create an empty, zero-filled blob in which to read or write using
 ** this interface.
 **
 ** To avoid a resource leak, every open [BLOB handle] should eventually
 ** be released by a call to [sqlite3_blob_close()].
 */
 SQLITE_API int sqlite3_blob_open(
   sqlite3*,
@@ skipping 174 matching lines @@
 ** synchronization. Though they are intended for internal
 ** use by SQLite, code that links against SQLite is
 ** permitted to use any of these routines.
 **
 ** The SQLite source code contains multiple implementations
 ** of these mutex routines.  An appropriate implementation
 ** is selected automatically at compile-time.  ^(The following
 ** implementations are available in the SQLite core:
 **
 ** <ul>
-** <li>   SQLITE_MUTEX_OS2
-** <li>   SQLITE_MUTEX_PTHREAD
+** <li>   SQLITE_MUTEX_PTHREADS
 ** <li>   SQLITE_MUTEX_W32
 ** <li>   SQLITE_MUTEX_NOOP
 ** </ul>)^
 **
 ** ^The SQLITE_MUTEX_NOOP implementation is a set of routines
 ** that does no real locking and is appropriate for use in
-** a single-threaded application.  ^The SQLITE_MUTEX_OS2,
-** SQLITE_MUTEX_PTHREAD, and SQLITE_MUTEX_W32 implementations
-** are appropriate for use on OS/2, Unix, and Windows.
+** a single-threaded application.  ^The SQLITE_MUTEX_PTHREADS and
+** SQLITE_MUTEX_W32 implementations are appropriate for use on Unix
+** and Windows.
 **
 ** ^(If SQLite is compiled with the SQLITE_MUTEX_APPDEF preprocessor
 ** macro defined (with "-DSQLITE_MUTEX_APPDEF=1"), then no mutex
 ** implementation is included with the library. In this case the
 ** application must supply a custom mutex implementation using the
 ** [SQLITE_CONFIG_MUTEX] option of the sqlite3_config() function
 ** before calling sqlite3_initialize() or any other public sqlite3_
 ** function that calls sqlite3_initialize().)^
 **
 ** ^The sqlite3_mutex_alloc() routine allocates a new
 ** mutex and returns a pointer to it. ^If it returns NULL
 ** that means that a mutex could not be allocated.  ^SQLite
 ** will unwind its stack and return an error.  ^(The argument
 ** to sqlite3_mutex_alloc() is one of these integer constants:
 **
 ** <ul>
 ** <li>  SQLITE_MUTEX_FAST
 ** <li>  SQLITE_MUTEX_RECURSIVE
 ** <li>  SQLITE_MUTEX_STATIC_MASTER
 ** <li>  SQLITE_MUTEX_STATIC_MEM
-** <li>  SQLITE_MUTEX_STATIC_MEM2
+** <li>  SQLITE_MUTEX_STATIC_OPEN
 ** <li>  SQLITE_MUTEX_STATIC_PRNG
 ** <li>  SQLITE_MUTEX_STATIC_LRU
-** <li>  SQLITE_MUTEX_STATIC_LRU2
+** <li>  SQLITE_MUTEX_STATIC_PMEM
+** <li>  SQLITE_MUTEX_STATIC_APP1
+** <li>  SQLITE_MUTEX_STATIC_APP2
 ** </ul>)^
 **
 ** ^The first two constants (SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE)
 ** cause sqlite3_mutex_alloc() to create
 ** a new mutex.  ^The new mutex is recursive when SQLITE_MUTEX_RECURSIVE
 ** is used but not necessarily so when SQLITE_MUTEX_FAST is used.
 ** The mutex implementation does not need to make a distinction
 ** between SQLITE_MUTEX_RECURSIVE and SQLITE_MUTEX_FAST if it does
 ** not want to.  ^SQLite will only request a recursive mutex in
 ** cases where it really needs one.  ^If a faster non-recursive mutex
@@ skipping 144 matching lines @@
 ** never uses these routines except inside an assert() and applications
 ** are advised to follow the lead of the core.  ^The SQLite core only
 ** provides implementations for these routines when it is compiled
 ** with the SQLITE_DEBUG flag.  ^External mutex implementations
 ** are only required to provide these routines if SQLITE_DEBUG is
 ** defined and if NDEBUG is not defined.
 **
 ** ^These routines should return true if the mutex in their argument
 ** is held or not held, respectively, by the calling thread.
 **
-** ^The implementation is not required to provided versions of these
+** ^The implementation is not required to provide versions of these
 ** routines that actually work. If the implementation does not provide working
 ** versions of these routines, it should at least provide stubs that always
 ** return true so that one does not get spurious assertion failures.
 **
 ** ^If the argument to sqlite3_mutex_held() is a NULL pointer then
 ** the routine should return 1.   This seems counter-intuitive since
-** clearly the mutex cannot be held if it does not exist.  But the
+** clearly the mutex cannot be held if it does not exist.  But
 ** the reason the mutex does not exist is because the build is not
 ** using mutexes.  And we do not want the assert() containing the
 ** call to sqlite3_mutex_held() to fail, so a non-zero return is
 ** the appropriate thing to do.  ^The sqlite3_mutex_notheld()
 ** interface should also return 1 when given a NULL pointer.
 */
 #ifndef NDEBUG
 SQLITE_API int sqlite3_mutex_held(sqlite3_mutex*);
 SQLITE_API int sqlite3_mutex_notheld(sqlite3_mutex*);
 #endif
@@ skipping 11 matching lines @@
 #define SQLITE_MUTEX_FAST             0
 #define SQLITE_MUTEX_RECURSIVE        1
 #define SQLITE_MUTEX_STATIC_MASTER    2
 #define SQLITE_MUTEX_STATIC_MEM       3  /* sqlite3_malloc() */
 #define SQLITE_MUTEX_STATIC_MEM2      4  /* NOT USED */
 #define SQLITE_MUTEX_STATIC_OPEN      4  /* sqlite3BtreeOpen() */
 #define SQLITE_MUTEX_STATIC_PRNG      5  /* sqlite3_random() */
 #define SQLITE_MUTEX_STATIC_LRU       6  /* lru page list */
 #define SQLITE_MUTEX_STATIC_LRU2      7  /* NOT USED */
 #define SQLITE_MUTEX_STATIC_PMEM      7  /* sqlite3PageMalloc() */
+#define SQLITE_MUTEX_STATIC_APP1      8  /* For use by application */
+#define SQLITE_MUTEX_STATIC_APP2      9  /* For use by application */
+#define SQLITE_MUTEX_STATIC_APP3     10  /* For use by application */
 
 /*
 ** CAPI3REF: Retrieve the mutex for a database connection
 **
 ** ^This interface returns a pointer the [sqlite3_mutex] object that 
 ** serializes access to the [database connection] given in the argument
 ** when the [threading mode] is Serialized.
 ** ^If the [threading mode] is Single-thread or Multi-thread then this
 ** routine returns a NULL pointer.
 */
@@ skipping 69 matching lines @@
 #define SQLITE_TESTCTRL_PRNG_RESET               7
 #define SQLITE_TESTCTRL_BITVEC_TEST              8
 #define SQLITE_TESTCTRL_FAULT_INSTALL            9
 #define SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS     10
 #define SQLITE_TESTCTRL_PENDING_BYTE            11
 #define SQLITE_TESTCTRL_ASSERT                  12
 #define SQLITE_TESTCTRL_ALWAYS                  13
 #define SQLITE_TESTCTRL_RESERVE                 14
 #define SQLITE_TESTCTRL_OPTIMIZATIONS           15
 #define SQLITE_TESTCTRL_ISKEYWORD               16
-#define SQLITE_TESTCTRL_PGHDRSZ                 17
-#define SQLITE_TESTCTRL_SCRATCHMALLOC           18
-#define SQLITE_TESTCTRL_LAST                    18
+#define SQLITE_TESTCTRL_SCRATCHMALLOC           17
+#define SQLITE_TESTCTRL_LOCALTIME_FAULT         18
+#define SQLITE_TESTCTRL_EXPLAIN_STMT            19  /* NOT USED */
+#define SQLITE_TESTCTRL_NEVER_CORRUPT           20
+#define SQLITE_TESTCTRL_VDBE_COVERAGE           21
+#define SQLITE_TESTCTRL_BYTEORDER               22
+#define SQLITE_TESTCTRL_ISINIT                  23
+#define SQLITE_TESTCTRL_SORTER_MMAP             24
+#define SQLITE_TESTCTRL_LAST                    24
 
 /*
 ** CAPI3REF: SQLite Runtime Status
 **
 ** ^This interface is used to retrieve runtime status information
 ** about the performance of SQLite, and optionally to reset various
 ** highwater marks.  ^The first argument is an integer code for
 ** the specific parameter to measure.  ^(Recognized integer codes
-** are of the form [SQLITE_STATUS_MEMORY_USED | SQLITE_STATUS_...].)^
+** are of the form [status parameters | SQLITE_STATUS_...].)^
 ** ^The current value of the parameter is returned into *pCurrent.
 ** ^The highest recorded value is returned in *pHighwater.  ^If the
 ** resetFlag is true, then the highest record value is reset after
 ** *pHighwater is written.  ^(Some parameters do not record the highest
 ** value.  For those parameters
 ** nothing is written into *pHighwater and the resetFlag is ignored.)^
 ** ^(Other parameters record only the highwater mark and not the current
 ** value.  For these latter parameters nothing is written into *pCurrent.)^
 **
 ** ^The sqlite3_status() routine returns SQLITE_OK on success and a
 ** non-zero [error code] on failure.
 **
 ** This routine is threadsafe but is not atomic.  This routine can be
 ** called while other threads are running the same or different SQLite
 ** interfaces.  However the values returned in *pCurrent and
 ** *pHighwater reflect the status of SQLite at different points in time
 ** and it is possible that another thread might change the parameter
 ** in between the times when *pCurrent and *pHighwater are written.
 **
 ** See also: [sqlite3_db_status()]
 */
 SQLITE_API int sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag);
 
 
 /*
 ** CAPI3REF: Status Parameters
+** KEYWORDS: {status parameters}
 **
 ** These integer constants designate various run-time status parameters
 ** that can be returned by [sqlite3_status()].
 **
 ** <dl>
-** ^(<dt>SQLITE_STATUS_MEMORY_USED</dt>
+** [[SQLITE_STATUS_MEMORY_USED]] ^(<dt>SQLITE_STATUS_MEMORY_USED</dt>
 ** <dd>This parameter is the current amount of memory checked out
 ** using [sqlite3_malloc()], either directly or indirectly.  The
 ** figure includes calls made to [sqlite3_malloc()] by the application
 ** and internal memory usage by the SQLite library.  Scratch memory
 ** controlled by [SQLITE_CONFIG_SCRATCH] and auxiliary page-cache
 ** memory controlled by [SQLITE_CONFIG_PAGECACHE] is not included in
 ** this parameter.  The amount returned is the sum of the allocation
 ** sizes as reported by the xSize method in [sqlite3_mem_methods].</dd>)^
 **
-** ^(<dt>SQLITE_STATUS_MALLOC_SIZE</dt>
+** [[SQLITE_STATUS_MALLOC_SIZE]] ^(<dt>SQLITE_STATUS_MALLOC_SIZE</dt>
 ** <dd>This parameter records the largest memory allocation request
 ** handed to [sqlite3_malloc()] or [sqlite3_realloc()] (or their
 ** internal equivalents).  Only the value returned in the
 ** *pHighwater parameter to [sqlite3_status()] is of interest.  
 ** The value written into the *pCurrent parameter is undefined.</dd>)^
 **
-** ^(<dt>SQLITE_STATUS_MALLOC_COUNT</dt>
+** [[SQLITE_STATUS_MALLOC_COUNT]] ^(<dt>SQLITE_STATUS_MALLOC_COUNT</dt>
 ** <dd>This parameter records the number of separate memory allocations
 ** currently checked out.</dd>)^
 **
-** ^(<dt>SQLITE_STATUS_PAGECACHE_USED</dt>
+** [[SQLITE_STATUS_PAGECACHE_USED]] ^(<dt>SQLITE_STATUS_PAGECACHE_USED</dt>
 ** <dd>This parameter returns the number of pages used out of the
 ** [pagecache memory allocator] that was configured using 
 ** [SQLITE_CONFIG_PAGECACHE].  The
 ** value returned is in pages, not in bytes.</dd>)^
 **
+** [[SQLITE_STATUS_PAGECACHE_OVERFLOW]] 
 ** ^(<dt>SQLITE_STATUS_PAGECACHE_OVERFLOW</dt>
 ** <dd>This parameter returns the number of bytes of page cache
 ** allocation which could not be satisfied by the [SQLITE_CONFIG_PAGECACHE]
 ** buffer and where forced to overflow to [sqlite3_malloc()].  The
 ** returned value includes allocations that overflowed because they
 ** where too large (they were larger than the "sz" parameter to
 ** [SQLITE_CONFIG_PAGECACHE]) and allocations that overflowed because
 ** no space was left in the page cache.</dd>)^
 **
-** ^(<dt>SQLITE_STATUS_PAGECACHE_SIZE</dt>
+** [[SQLITE_STATUS_PAGECACHE_SIZE]] ^(<dt>SQLITE_STATUS_PAGECACHE_SIZE</dt>
 ** <dd>This parameter records the largest memory allocation request
 ** handed to [pagecache memory allocator].  Only the value returned in the
 ** *pHighwater parameter to [sqlite3_status()] is of interest.  
 ** The value written into the *pCurrent parameter is undefined.</dd>)^
 **
-** ^(<dt>SQLITE_STATUS_SCRATCH_USED</dt>
+** [[SQLITE_STATUS_SCRATCH_USED]] ^(<dt>SQLITE_STATUS_SCRATCH_USED</dt>
 ** <dd>This parameter returns the number of allocations used out of the
 ** [scratch memory allocator] configured using
 ** [SQLITE_CONFIG_SCRATCH].  The value returned is in allocations, not
 ** in bytes.  Since a single thread may only have one scratch allocation
 ** outstanding at time, this parameter also reports the number of threads
 ** using scratch memory at the same time.</dd>)^
 **
-** ^(<dt>SQLITE_STATUS_SCRATCH_OVERFLOW</dt>
+** [[SQLITE_STATUS_SCRATCH_OVERFLOW]] ^(<dt>SQLITE_STATUS_SCRATCH_OVERFLOW</dt>
 ** <dd>This parameter returns the number of bytes of scratch memory
 ** allocation which could not be satisfied by the [SQLITE_CONFIG_SCRATCH]
 ** buffer and where forced to overflow to [sqlite3_malloc()].  The values
 ** returned include overflows because the requested allocation was too
 ** larger (that is, because the requested allocation was larger than the
 ** "sz" parameter to [SQLITE_CONFIG_SCRATCH]) and because no scratch buffer
 ** slots were available.
 ** </dd>)^
 **
-** ^(<dt>SQLITE_STATUS_SCRATCH_SIZE</dt>
+** [[SQLITE_STATUS_SCRATCH_SIZE]] ^(<dt>SQLITE_STATUS_SCRATCH_SIZE</dt>
 ** <dd>This parameter records the largest memory allocation request
 ** handed to [scratch memory allocator].  Only the value returned in the
 ** *pHighwater parameter to [sqlite3_status()] is of interest.  
 ** The value written into the *pCurrent parameter is undefined.</dd>)^
 **
-** ^(<dt>SQLITE_STATUS_PARSER_STACK</dt>
+** [[SQLITE_STATUS_PARSER_STACK]] ^(<dt>SQLITE_STATUS_PARSER_STACK</dt>
 ** <dd>This parameter records the deepest parser stack.  It is only
 ** meaningful if SQLite is compiled with [YYTRACKMAXSTACKDEPTH].</dd>)^
 ** </dl>
 **
 ** New status parameters may be added from time to time.
 */
 #define SQLITE_STATUS_MEMORY_USED          0
 #define SQLITE_STATUS_PAGECACHE_USED       1
 #define SQLITE_STATUS_PAGECACHE_OVERFLOW   2
 #define SQLITE_STATUS_SCRATCH_USED         3
 #define SQLITE_STATUS_SCRATCH_OVERFLOW     4
 #define SQLITE_STATUS_MALLOC_SIZE          5
 #define SQLITE_STATUS_PARSER_STACK         6
 #define SQLITE_STATUS_PAGECACHE_SIZE       7
 #define SQLITE_STATUS_SCRATCH_SIZE         8
 #define SQLITE_STATUS_MALLOC_COUNT         9
 
 /*
 ** CAPI3REF: Database Connection Status
 **
 ** ^This interface is used to retrieve runtime status information 
 ** about a single [database connection].  ^The first argument is the
 ** database connection object to be interrogated.  ^The second argument
 ** is an integer constant, taken from the set of
-** [SQLITE_DBSTATUS_LOOKASIDE_USED | SQLITE_DBSTATUS_*] macros, that
+** [SQLITE_DBSTATUS options], that
 ** determines the parameter to interrogate.  The set of 
-** [SQLITE_DBSTATUS_LOOKASIDE_USED | SQLITE_DBSTATUS_*] macros is likely
+** [SQLITE_DBSTATUS options] is likely
 ** to grow in future releases of SQLite.
 **
 ** ^The current value of the requested parameter is written into *pCur
 ** and the highest instantaneous value is written into *pHiwtr.  ^If
 ** the resetFlg is true, then the highest instantaneous value is
 ** reset back down to the current value.
 **
 ** ^The sqlite3_db_status() routine returns SQLITE_OK on success and a
 ** non-zero [error code] on failure.
 **
 ** See also: [sqlite3_status()] and [sqlite3_stmt_status()].
 */
 SQLITE_API int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int resetFlg);
 
 /*
 ** CAPI3REF: Status Parameters for database connections
+** KEYWORDS: {SQLITE_DBSTATUS options}
 **
 ** These constants are the available integer "verbs" that can be passed as
 ** the second argument to the [sqlite3_db_status()] interface.
 **
 ** New verbs may be added in future releases of SQLite. Existing verbs
 ** might be discontinued. Applications should check the return code from
 ** [sqlite3_db_status()] to make sure that the call worked.
 ** The [sqlite3_db_status()] interface will return a non-zero error code
 ** if a discontinued or unsupported verb is invoked.
 **
 ** <dl>
-** ^(<dt>SQLITE_DBSTATUS_LOOKASIDE_USED</dt>
+** [[SQLITE_DBSTATUS_LOOKASIDE_USED]] ^(<dt>SQLITE_DBSTATUS_LOOKASIDE_USED</dt>
 ** <dd>This parameter returns the number of lookaside memory slots currently
 ** checked out.</dd>)^
 **
-** ^(<dt>SQLITE_DBSTATUS_LOOKASIDE_HIT</dt>
+** [[SQLITE_DBSTATUS_LOOKASIDE_HIT]] ^(<dt>SQLITE_DBSTATUS_LOOKASIDE_HIT</dt>
 ** <dd>This parameter returns the number malloc attempts that were 
 ** satisfied using lookaside memory. Only the high-water value is meaningful;
 ** the current value is always zero.)^
 **
+** [[SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE]]
 ** ^(<dt>SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE</dt>
 ** <dd>This parameter returns the number malloc attempts that might have
 ** been satisfied using lookaside memory but failed due to the amount of
 ** memory requested being larger than the lookaside slot size.
 ** Only the high-water value is meaningful;
 ** the current value is always zero.)^
 **
+** [[SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL]]
 ** ^(<dt>SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL</dt>
 ** <dd>This parameter returns the number malloc attempts that might have
 ** been satisfied using lookaside memory but failed due to all lookaside
 ** memory already being in use.
 ** Only the high-water value is meaningful;
 ** the current value is always zero.)^
 **
-** ^(<dt>SQLITE_DBSTATUS_CACHE_USED</dt>
-** <dd>This parameter returns the approximate number of of bytes of heap
+** [[SQLITE_DBSTATUS_CACHE_USED]] ^(<dt>SQLITE_DBSTATUS_CACHE_USED</dt>
+** <dd>This parameter returns the approximate number of bytes of heap
 ** memory used by all pager caches associated with the database connection.)^
 ** ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_USED is always 0.
 **
-** ^(<dt>SQLITE_DBSTATUS_SCHEMA_USED</dt>
-** <dd>This parameter returns the approximate number of of bytes of heap
+** [[SQLITE_DBSTATUS_SCHEMA_USED]] ^(<dt>SQLITE_DBSTATUS_SCHEMA_USED</dt>
+** <dd>This parameter returns the approximate number of bytes of heap
 ** memory used to store the schema for all databases associated
 ** with the connection - main, temp, and any [ATTACH]-ed databases.)^ 
 ** ^The full amount of memory used by the schemas is reported, even if the
 ** schema memory is shared with other database connections due to
 ** [shared cache mode] being enabled.
 ** ^The highwater mark associated with SQLITE_DBSTATUS_SCHEMA_USED is always 0.
 **
-** ^(<dt>SQLITE_DBSTATUS_STMT_USED</dt>
-** <dd>This parameter returns the approximate number of of bytes of heap
+** [[SQLITE_DBSTATUS_STMT_USED]] ^(<dt>SQLITE_DBSTATUS_STMT_USED</dt>
+** <dd>This parameter returns the approximate number of bytes of heap
 ** and lookaside memory used by all prepared statements associated with
 ** the database connection.)^
 ** ^The highwater mark associated with SQLITE_DBSTATUS_STMT_USED is always 0.
 ** </dd>
+**
+** [[SQLITE_DBSTATUS_CACHE_HIT]] ^(<dt>SQLITE_DBSTATUS_CACHE_HIT</dt>
+** <dd>This parameter returns the number of pager cache hits that have
+** occurred.)^ ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_HIT 
+** is always 0.
+** </dd>
+**
+** [[SQLITE_DBSTATUS_CACHE_MISS]] ^(<dt>SQLITE_DBSTATUS_CACHE_MISS</dt>
+** <dd>This parameter returns the number of pager cache misses that have
+** occurred.)^ ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_MISS 
+** is always 0.
+** </dd>
+**
+** [[SQLITE_DBSTATUS_CACHE_WRITE]] ^(<dt>SQLITE_DBSTATUS_CACHE_WRITE</dt>
+** <dd>This parameter returns the number of dirty cache entries that have
+** been written to disk. Specifically, the number of pages written to the
+** wal file in wal mode databases, or the number of pages written to the
+** database file in rollback mode databases. Any pages written as part of
+** transaction rollback or database recovery operations are not included.
+** If an IO or other error occurs while writing a page to disk, the effect
+** on subsequent SQLITE_DBSTATUS_CACHE_WRITE requests is undefined.)^ ^The
+** highwater mark associated with SQLITE_DBSTATUS_CACHE_WRITE is always 0.
+** </dd>
+**
+** [[SQLITE_DBSTATUS_DEFERRED_FKS]] ^(<dt>SQLITE_DBSTATUS_DEFERRED_FKS</dt>
+** <dd>This parameter returns zero for the current value if and only if
+** all foreign key constraints (deferred or immediate) have been
+** resolved.)^  ^The highwater mark is always 0.
+** </dd>
 ** </dl>
 */
 #define SQLITE_DBSTATUS_LOOKASIDE_USED       0
 #define SQLITE_DBSTATUS_CACHE_USED           1
 #define SQLITE_DBSTATUS_SCHEMA_USED          2
 #define SQLITE_DBSTATUS_STMT_USED            3
 #define SQLITE_DBSTATUS_LOOKASIDE_HIT        4
 #define SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE  5
 #define SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL  6
-#define SQLITE_DBSTATUS_MAX                  6   /* Largest defined DBSTATUS */
+#define SQLITE_DBSTATUS_CACHE_HIT            7
+#define SQLITE_DBSTATUS_CACHE_MISS           8
+#define SQLITE_DBSTATUS_CACHE_WRITE          9
+#define SQLITE_DBSTATUS_DEFERRED_FKS        10
+#define SQLITE_DBSTATUS_MAX                 10   /* Largest defined DBSTATUS */
 
 
 /*
 ** CAPI3REF: Prepared Statement Status
 **
 ** ^(Each prepared statement maintains various
-** [SQLITE_STMTSTATUS_SORT | counters] that measure the number
+** [SQLITE_STMTSTATUS counters] that measure the number
 ** of times it has performed specific operations.)^  These counters can
 ** be used to monitor the performance characteristics of the prepared
 ** statements.  For example, if the number of table steps greatly exceeds
 ** the number of table searches or result rows, that would tend to indicate
 ** that the prepared statement is using a full table scan rather than
 ** an index.  
 **
 ** ^(This interface is used to retrieve and reset counter values from
 ** a [prepared statement].  The first argument is the prepared statement
 ** object to be interrogated.  The second argument
-** is an integer code for a specific [SQLITE_STMTSTATUS_SORT | counter]
+** is an integer code for a specific [SQLITE_STMTSTATUS counter]
 ** to be interrogated.)^
 ** ^The current value of the requested counter is returned.
 ** ^If the resetFlg is true, then the counter is reset to zero after this
 ** interface call returns.
 **
 ** See also: [sqlite3_status()] and [sqlite3_db_status()].
 */
 SQLITE_API int sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg);
 
 /*
 ** CAPI3REF: Status Parameters for prepared statements
+** KEYWORDS: {SQLITE_STMTSTATUS counter} {SQLITE_STMTSTATUS counters}
 **
 ** These preprocessor macros define integer codes that name counter
 ** values associated with the [sqlite3_stmt_status()] interface.
 ** The meanings of the various counters are as follows:
 **
 ** <dl>
-** <dt>SQLITE_STMTSTATUS_FULLSCAN_STEP</dt>
+** [[SQLITE_STMTSTATUS_FULLSCAN_STEP]] <dt>SQLITE_STMTSTATUS_FULLSCAN_STEP</dt>
 ** <dd>^This is the number of times that SQLite has stepped forward in
 ** a table as part of a full table scan.  Large numbers for this counter
 ** may indicate opportunities for performance improvement through 
 ** careful use of indices.</dd>
 **
-** <dt>SQLITE_STMTSTATUS_SORT</dt>
+** [[SQLITE_STMTSTATUS_SORT]] <dt>SQLITE_STMTSTATUS_SORT</dt>
 ** <dd>^This is the number of sort operations that have occurred.
 ** A non-zero value in this counter may indicate an opportunity to
 ** improvement performance through careful use of indices.</dd>
 **
-** <dt>SQLITE_STMTSTATUS_AUTOINDEX</dt>
+** [[SQLITE_STMTSTATUS_AUTOINDEX]] <dt>SQLITE_STMTSTATUS_AUTOINDEX</dt>
 ** <dd>^This is the number of rows inserted into transient indices that
 ** were created automatically in order to help joins run faster.
 ** A non-zero value in this counter may indicate an opportunity to
 ** improvement performance by adding permanent indices that do not
 ** need to be reinitialized each time the statement is run.</dd>
 **
+** [[SQLITE_STMTSTATUS_VM_STEP]] <dt>SQLITE_STMTSTATUS_VM_STEP</dt>
+** <dd>^This is the number of virtual machine operations executed
+** by the prepared statement if that number is less than or equal
+** to 2147483647.  The number of virtual machine operations can be 
+** used as a proxy for the total work done by the prepared statement.
+** If the number of virtual machine operations exceeds 2147483647
+** then the value returned by this statement status code is undefined.
+** </dd>
 ** </dl>
 */
 #define SQLITE_STMTSTATUS_FULLSCAN_STEP     1
 #define SQLITE_STMTSTATUS_SORT              2
 #define SQLITE_STMTSTATUS_AUTOINDEX         3
+#define SQLITE_STMTSTATUS_VM_STEP           4
 
 /*
 ** CAPI3REF: Custom Page Cache Object
 **
 ** The sqlite3_pcache type is opaque.  It is implemented by
 ** the pluggable module.  The SQLite core has no knowledge of
 ** its size or internal structure and never deals with the
 ** sqlite3_pcache object except by holding and passing pointers
 ** to the object.
 **
-** See [sqlite3_pcache_methods] for additional information.
+** See [sqlite3_pcache_methods2] for additional information.
 */
 typedef struct sqlite3_pcache sqlite3_pcache;
 
 /*
+** CAPI3REF: Custom Page Cache Object
+**
+** The sqlite3_pcache_page object represents a single page in the
+** page cache.  The page cache will allocate instances of this
+** object.  Various methods of the page cache use pointers to instances
+** of this object as parameters or as their return value.
+**
+** See [sqlite3_pcache_methods2] for additional information.
+*/
+typedef struct sqlite3_pcache_page sqlite3_pcache_page;
+struct sqlite3_pcache_page {
+  void *pBuf;        /* The content of the page */
+  void *pExtra;      /* Extra information associated with the page */
+};
+
+/*
 ** CAPI3REF: Application Defined Page Cache.
 ** KEYWORDS: {page cache}
 **
-** ^(The [sqlite3_config]([SQLITE_CONFIG_PCACHE], ...) interface can
+** ^(The [sqlite3_config]([SQLITE_CONFIG_PCACHE2], ...) interface can
 ** register an alternative page cache implementation by passing in an 
-** instance of the sqlite3_pcache_methods structure.)^
+** instance of the sqlite3_pcache_methods2 structure.)^
 ** In many applications, most of the heap memory allocated by 
 ** SQLite is used for the page cache.
 ** By implementing a 
 ** custom page cache using this API, an application can better control
 ** the amount of memory consumed by SQLite, the way in which 
 ** that memory is allocated and released, and the policies used to 
 ** determine exactly which parts of a database file are cached and for 
 ** how long.
 **
 ** The alternative page cache mechanism is an
 ** extreme measure that is only needed by the most demanding applications.
 ** The built-in page cache is recommended for most uses.
 **
-** ^(The contents of the sqlite3_pcache_methods structure are copied to an
+** ^(The contents of the sqlite3_pcache_methods2 structure are copied to an
 ** internal buffer by SQLite within the call to [sqlite3_config].  Hence
 ** the application may discard the parameter after the call to
 ** [sqlite3_config()] returns.)^
 **
+** [[the xInit() page cache method]]
 ** ^(The xInit() method is called once for each effective 
 ** call to [sqlite3_initialize()])^
 ** (usually only once during the lifetime of the process). ^(The xInit()
-** method is passed a copy of the sqlite3_pcache_methods.pArg value.)^
+** method is passed a copy of the sqlite3_pcache_methods2.pArg value.)^
 ** The intent of the xInit() method is to set up global data structures 
 ** required by the custom page cache implementation. 
 ** ^(If the xInit() method is NULL, then the 
 ** built-in default page cache is used instead of the application defined
 ** page cache.)^
 **
+** [[the xShutdown() page cache method]]
 ** ^The xShutdown() method is called by [sqlite3_shutdown()].
 ** It can be used to clean up 
 ** any outstanding resources before process shutdown, if required.
 ** ^The xShutdown() method may be NULL.
 **
 ** ^SQLite automatically serializes calls to the xInit method,
 ** so the xInit method need not be threadsafe.  ^The
 ** xShutdown method is only called from [sqlite3_shutdown()] so it does
 ** not need to be threadsafe either.  All other methods must be threadsafe
 ** in multithreaded applications.
 **
 ** ^SQLite will never invoke xInit() more than once without an intervening
 ** call to xShutdown().
 **
+** [[the xCreate() page cache methods]]
 ** ^SQLite invokes the xCreate() method to construct a new cache instance.
 ** SQLite will typically create one cache instance for each open database file,
 ** though this is not guaranteed. ^The
 ** first parameter, szPage, is the size in bytes of the pages that must
-** be allocated by the cache.  ^szPage will not be a power of two.  ^szPage
-** will the page size of the database file that is to be cached plus an
-** increment (here called "R") of less than 250.  SQLite will use the
-** extra R bytes on each page to store metadata about the underlying
-** database page on disk.  The value of R depends
+** be allocated by the cache.  ^szPage will always a power of two.  ^The
+** second parameter szExtra is a number of bytes of extra storage 
+** associated with each page cache entry.  ^The szExtra parameter will
+** a number less than 250.  SQLite will use the
+** extra szExtra bytes on each page to store metadata about the underlying
+** database page on disk.  The value passed into szExtra depends
 ** on the SQLite version, the target platform, and how SQLite was compiled.
-** ^(R is constant for a particular build of SQLite. Except, there are two
-** distinct values of R when SQLite is compiled with the proprietary
-** ZIPVFS extension.)^  ^The second argument to
-** xCreate(), bPurgeable, is true if the cache being created will
-** be used to cache database pages of a file stored on disk, or
+** ^The third argument to xCreate(), bPurgeable, is true if the cache being
+** created will be used to cache database pages of a file stored on disk, or
 ** false if it is used for an in-memory database. The cache implementation
 ** does not have to do anything special based with the value of bPurgeable;
 ** it is purely advisory.  ^On a cache where bPurgeable is false, SQLite will
 ** never invoke xUnpin() except to deliberately delete a page.
 ** ^In other words, calls to xUnpin() on a cache with bPurgeable set to
 ** false will always have the "discard" flag set to true.  
 ** ^Hence, a cache created with bPurgeable false will
 ** never contain any unpinned pages.
 **
+** [[the xCachesize() page cache method]]
 ** ^(The xCachesize() method may be called at any time by SQLite to set the
 ** suggested maximum cache-size (number of pages stored by) the cache
 ** instance passed as the first argument. This is the value configured using
 ** the SQLite "[PRAGMA cache_size]" command.)^  As with the bPurgeable
 ** parameter, the implementation is not required to do anything with this
 ** value; it is advisory only.
 **
+** [[the xPagecount() page cache methods]]
 ** The xPagecount() method must return the number of pages currently
 ** stored in the cache, both pinned and unpinned.
 ** 
+** [[the xFetch() page cache methods]]
 ** The xFetch() method locates a page in the cache and returns a pointer to 
-** the page, or a NULL pointer.
-** A "page", in this context, means a buffer of szPage bytes aligned at an
-** 8-byte boundary. The page to be fetched is determined by the key. ^The
-** mimimum key value is 1.  After it has been retrieved using xFetch, the page 
-** is considered to be "pinned".
+** an sqlite3_pcache_page object associated with that page, or a NULL pointer.
+** The pBuf element of the returned sqlite3_pcache_page object will be a
+** pointer to a buffer of szPage bytes used to store the content of a 
+** single database page.  The pExtra element of sqlite3_pcache_page will be
+** a pointer to the szExtra bytes of extra storage that SQLite has requested
+** for each entry in the page cache.
+**
+** The page to be fetched is determined by the key. ^The minimum key value
+** is 1.  After it has been retrieved using xFetch, the page is considered
+** to be "pinned".
 **
 ** If the requested page is already in the page cache, then the page cache
 ** implementation must return a pointer to the page buffer with its content
 ** intact.  If the requested page is not already in the cache, then the
 ** cache implementation should use the value of the createFlag
 ** parameter to help it determined what action to take:
 **
 ** <table border=1 width=85% align=center>
-** <tr><th> createFlag <th> Behaviour when page is not already in cache
+** <tr><th> createFlag <th> Behavior when page is not already in cache
 ** <tr><td> 0 <td> Do not allocate a new page.  Return NULL.
 ** <tr><td> 1 <td> Allocate a new page if it easy and convenient to do so.
 **                 Otherwise return NULL.
 ** <tr><td> 2 <td> Make every effort to allocate a new page.  Only return
 **                 NULL if allocating a new page is effectively impossible.
 ** </table>
 **
 ** ^(SQLite will normally invoke xFetch() with a createFlag of 0 or 1.  SQLite
 ** will only use a createFlag of 2 after a prior call with a createFlag of 1
 ** failed.)^  In between the to xFetch() calls, SQLite may
 ** attempt to unpin one or more cache pages by spilling the content of
 ** pinned pages to disk and synching the operating system disk cache.
 **
+** [[the xUnpin() page cache method]]
 ** ^xUnpin() is called by SQLite with a pointer to a currently pinned page
 ** as its second argument.  If the third parameter, discard, is non-zero,
 ** then the page must be evicted from the cache.
 ** ^If the discard parameter is
 ** zero, then the page may be discarded or retained at the discretion of
 ** page cache implementation. ^The page cache implementation
 ** may choose to evict unpinned pages at any time.
 **
 ** The cache must not perform any reference counting. A single 
 ** call to xUnpin() unpins the page regardless of the number of prior calls 
 ** to xFetch().
 **
+** [[the xRekey() page cache methods]]
 ** The xRekey() method is used to change the key value associated with the
 ** page passed as the second argument. If the cache
 ** previously contains an entry associated with newKey, it must be
 ** discarded. ^Any prior cache entry associated with newKey is guaranteed not
 ** to be pinned.
 **
 ** When SQLite calls the xTruncate() method, the cache must discard all
 ** existing cache entries with page numbers (keys) greater than or equal
 ** to the value of the iLimit parameter passed to xTruncate(). If any
 ** of these pages are pinned, they are implicitly unpinned, meaning that
 ** they can be safely discarded.
 **
+** [[the xDestroy() page cache method]]
 ** ^The xDestroy() method is used to delete a cache allocated by xCreate().
 ** All resources associated with the specified cache should be freed. ^After
 ** calling the xDestroy() method, SQLite considers the [sqlite3_pcache*]
-** handle invalid, and will not use it with any other sqlite3_pcache_methods
+** handle invalid, and will not use it with any other sqlite3_pcache_methods2
 ** functions.
+**
+** [[the xShrink() page cache method]]
+** ^SQLite invokes the xShrink() method when it wants the page cache to
+** free up as much of heap memory as possible.  The page cache implementation
+** is not obligated to free any memory, but well-behaved implementations should
+** do their best.
+*/
+typedef struct sqlite3_pcache_methods2 sqlite3_pcache_methods2;
+struct sqlite3_pcache_methods2 {
+  int iVersion;
+  void *pArg;
+  int (*xInit)(void*);
+  void (*xShutdown)(void*);
+  sqlite3_pcache *(*xCreate)(int szPage, int szExtra, int bPurgeable);
+  void (*xCachesize)(sqlite3_pcache*, int nCachesize);
+  int (*xPagecount)(sqlite3_pcache*);
+  sqlite3_pcache_page *(*xFetch)(sqlite3_pcache*, unsigned key, int createFlag);
+  void (*xUnpin)(sqlite3_pcache*, sqlite3_pcache_page*, int discard);
+  void (*xRekey)(sqlite3_pcache*, sqlite3_pcache_page*, 
+      unsigned oldKey, unsigned newKey);
+  void (*xTruncate)(sqlite3_pcache*, unsigned iLimit);
+  void (*xDestroy)(sqlite3_pcache*);
+  void (*xShrink)(sqlite3_pcache*);
+};
+
+/*
+** This is the obsolete pcache_methods object that has now been replaced
+** by sqlite3_pcache_methods2.  This object is not used by SQLite.  It is
+** retained in the header file for backwards compatibility only.
 */
 typedef struct sqlite3_pcache_methods sqlite3_pcache_methods;
 struct sqlite3_pcache_methods {
   void *pArg;
   int (*xInit)(void*);
   void (*xShutdown)(void*);
   sqlite3_pcache *(*xCreate)(int szPage, int bPurgeable);
   void (*xCachesize)(sqlite3_pcache*, int nCachesize);
   int (*xPagecount)(sqlite3_pcache*);
   void *(*xFetch)(sqlite3_pcache*, unsigned key, int createFlag);
   void (*xUnpin)(sqlite3_pcache*, void*, int discard);
   void (*xRekey)(sqlite3_pcache*, void*, unsigned oldKey, unsigned newKey);
   void (*xTruncate)(sqlite3_pcache*, unsigned iLimit);
   void (*xDestroy)(sqlite3_pcache*);
 };
 
+
 /*
 ** CAPI3REF: Online Backup Object
 **
 ** The sqlite3_backup object records state information about an ongoing
 ** online backup operation.  ^The sqlite3_backup object is created by
 ** a call to [sqlite3_backup_init()] and is destroyed by a call to
 ** [sqlite3_backup_finish()].
 **
 ** See Also: [Using the SQLite Online Backup API]
 */
@@ skipping 21 matching lines @@
 **     <li><b>sqlite3_backup_init()</b> is called once to initialize the
 **         backup, 
 **     <li><b>sqlite3_backup_step()</b> is called one or more times to transfer 
 **         the data between the two databases, and finally
 **     <li><b>sqlite3_backup_finish()</b> is called to release all resources 
 **         associated with the backup operation. 
 **   </ol>)^
 ** There should be exactly one call to sqlite3_backup_finish() for each
 ** successful call to sqlite3_backup_init().
 **
-** <b>sqlite3_backup_init()</b>
+** [[sqlite3_backup_init()]] <b>sqlite3_backup_init()</b>
 **
 ** ^The D and N arguments to sqlite3_backup_init(D,N,S,M) are the 
 ** [database connection] associated with the destination database 
 ** and the database name, respectively.
 ** ^The database name is "main" for the main database, "temp" for the
 ** temporary database, or the name specified after the AS keyword in
 ** an [ATTACH] statement for an attached database.
 ** ^The S and M arguments passed to 
 ** sqlite3_backup_init(D,N,S,M) identify the [database connection]
 ** and database name of the source database, respectively.
 ** ^The source and destination [database connections] (parameters S and D)
 ** must be different or else sqlite3_backup_init(D,N,S,M) will fail with
 ** an error.
 **
 ** ^If an error occurs within sqlite3_backup_init(D,N,S,M), then NULL is
 ** returned and an error code and error message are stored in the
 ** destination [database connection] D.
 ** ^The error code and message for the failed call to sqlite3_backup_init()
 ** can be retrieved using the [sqlite3_errcode()], [sqlite3_errmsg()], and/or
 ** [sqlite3_errmsg16()] functions.
 ** ^A successful call to sqlite3_backup_init() returns a pointer to an
 ** [sqlite3_backup] object.
 ** ^The [sqlite3_backup] object may be used with the sqlite3_backup_step() and
 ** sqlite3_backup_finish() functions to perform the specified backup 
 ** operation.
 **
-** <b>sqlite3_backup_step()</b>
+** [[sqlite3_backup_step()]] <b>sqlite3_backup_step()</b>
 **
 ** ^Function sqlite3_backup_step(B,N) will copy up to N pages between 
 ** the source and destination databases specified by [sqlite3_backup] object B.
 ** ^If N is negative, all remaining source pages are copied. 
 ** ^If sqlite3_backup_step(B,N) successfully copies N pages and there
 ** are still more pages to be copied, then the function returns [SQLITE_OK].
 ** ^If sqlite3_backup_step(B,N) successfully finishes copying all pages
 ** from source to destination, then it returns [SQLITE_DONE].
 ** ^If an error occurs while running sqlite3_backup_step(B,N),
 ** then an [error code] is returned. ^As well as [SQLITE_OK] and
@@ skipping 36 matching lines @@
 ** ^Because the source database is not locked between calls to
 ** sqlite3_backup_step(), the source database may be modified mid-way
 ** through the backup process.  ^If the source database is modified by an
 ** external process or via a database connection other than the one being
 ** used by the backup operation, then the backup will be automatically
 ** restarted by the next call to sqlite3_backup_step(). ^If the source 
 ** database is modified by the using the same database connection as is used
 ** by the backup operation, then the backup database is automatically
 ** updated at the same time.
 **
-** <b>sqlite3_backup_finish()</b>
+** [[sqlite3_backup_finish()]] <b>sqlite3_backup_finish()</b>
 **
 ** When sqlite3_backup_step() has returned [SQLITE_DONE], or when the 
 ** application wishes to abandon the backup operation, the application
 ** should destroy the [sqlite3_backup] by passing it to sqlite3_backup_finish().
 ** ^The sqlite3_backup_finish() interfaces releases all
 ** resources associated with the [sqlite3_backup] object. 
 ** ^If sqlite3_backup_step() has not yet returned [SQLITE_DONE], then any
 ** active write-transaction on the destination database is rolled back.
 ** The [sqlite3_backup] object is invalid
 ** and may not be used following a call to sqlite3_backup_finish().
 **
 ** ^The value returned by sqlite3_backup_finish is [SQLITE_OK] if no
 ** sqlite3_backup_step() errors occurred, regardless or whether or not
 ** sqlite3_backup_step() completed.
 ** ^If an out-of-memory condition or IO error occurred during any prior
 ** sqlite3_backup_step() call on the same [sqlite3_backup] object, then
 ** sqlite3_backup_finish() returns the corresponding [error code].
 **
 ** ^A return of [SQLITE_BUSY] or [SQLITE_LOCKED] from sqlite3_backup_step()
 ** is not a permanent error and does not affect the return value of
 ** sqlite3_backup_finish().
 **
-** <b>sqlite3_backup_remaining(), sqlite3_backup_pagecount()</b>
+** [[sqlite3_backup__remaining()]] [[sqlite3_backup_pagecount()]]
+** <b>sqlite3_backup_remaining() and sqlite3_backup_pagecount()</b>
 **
 ** ^Each call to sqlite3_backup_step() sets two values inside
 ** the [sqlite3_backup] object: the number of pages still to be backed
 ** up and the total number of pages in the source database file.
 ** The sqlite3_backup_remaining() and sqlite3_backup_pagecount() interfaces
 ** retrieve these two values, respectively.
 **
 ** ^The values returned by these functions are only updated by
 ** sqlite3_backup_step(). ^If the source database is modified during a backup
 ** operation, then the values are not updated to account for any extra
@@ skipping 159 matching lines @@
 SQLITE_API int sqlite3_unlock_notify(
   sqlite3 *pBlocked,                          /* Waiting connection */
   void (*xNotify)(void **apArg, int nArg),    /* Callback function to invoke */
   void *pNotifyArg                            /* Argument to pass to xNotify */
 );
 
 
 /*
 ** CAPI3REF: String Comparison
 **
-** ^The [sqlite3_strnicmp()] API allows applications and extensions to
-** compare the contents of two buffers containing UTF-8 strings in a
-** case-independent fashion, using the same definition of case independence 
-** that SQLite uses internally when comparing identifiers.
+** ^The [sqlite3_stricmp()] and [sqlite3_strnicmp()] APIs allow applications
+** and extensions to compare the contents of two buffers containing UTF-8
+** strings in a case-independent fashion, using the same definition of "case
+** independence" that SQLite uses internally when comparing identifiers.
 */
+SQLITE_API int sqlite3_stricmp(const char *, const char *);
 SQLITE_API int sqlite3_strnicmp(const char *, const char *, int);
 
 /*
+** CAPI3REF: String Globbing
+*
+** ^The [sqlite3_strglob(P,X)] interface returns zero if string X matches
+** the glob pattern P, and it returns non-zero if string X does not match
+** the glob pattern P.  ^The definition of glob pattern matching used in
+** [sqlite3_strglob(P,X)] is the same as for the "X GLOB P" operator in the
+** SQL dialect used by SQLite.  ^The sqlite3_strglob(P,X) function is case
+** sensitive.
+**
+** Note that this routine returns zero on a match and non-zero if the strings
+** do not match, the same as [sqlite3_stricmp()] and [sqlite3_strnicmp()].
+*/
+SQLITE_API int sqlite3_strglob(const char *zGlob, const char *zStr);
+
+/*
 ** CAPI3REF: Error Logging Interface
 **
-** ^The [sqlite3_log()] interface writes a message into the error log
+** ^The [sqlite3_log()] interface writes a message into the [error log]
 ** established by the [SQLITE_CONFIG_LOG] option to [sqlite3_config()].
 ** ^If logging is enabled, the zFormat string and subsequent arguments are
 ** used with [sqlite3_snprintf()] to generate the final output string.
 **
 ** The sqlite3_log() interface is intended for use by extensions such as
 ** virtual tables, collating functions, and SQL functions.  While there is
 ** nothing to prevent an application from calling sqlite3_log(), doing so
 ** is considered bad form.
 **
 ** The zFormat string must not be NULL.
@@ skipping 59 matching lines @@
 ** checkpoints entirely.
 **
 ** ^The callback registered by this function replaces any existing callback
 ** registered using [sqlite3_wal_hook()].  ^Likewise, registering a callback
 ** using [sqlite3_wal_hook()] disables the automatic checkpoint mechanism
 ** configured by this function.
 **
 ** ^The [wal_autocheckpoint pragma] can be used to invoke this interface
 ** from SQL.
 **
+** ^Checkpoints initiated by this mechanism are
+** [sqlite3_wal_checkpoint_v2|PASSIVE].
+**
 ** ^Every new [database connection] defaults to having the auto-checkpoint
 ** enabled with a threshold of 1000 or [SQLITE_DEFAULT_WAL_AUTOCHECKPOINT]
 ** pages.  The use of this interface
 ** is only necessary if the default setting is found to be suboptimal
 ** for a particular application.
 */
 SQLITE_API int sqlite3_wal_autocheckpoint(sqlite3 *db, int N);
 
 /*
 ** CAPI3REF: Checkpoint a database
 **
 ** ^The [sqlite3_wal_checkpoint(D,X)] interface causes database named X
 ** on [database connection] D to be [checkpointed].  ^If X is NULL or an
 ** empty string, then a checkpoint is run on all databases of
 ** connection D.  ^If the database connection D is not in
 ** [WAL | write-ahead log mode] then this interface is a harmless no-op.
+** ^The [sqlite3_wal_checkpoint(D,X)] interface initiates a
+** [sqlite3_wal_checkpoint_v2|PASSIVE] checkpoint.
+** Use the [sqlite3_wal_checkpoint_v2()] interface to get a FULL
+** or RESET checkpoint.
 **
 ** ^The [wal_checkpoint pragma] can be used to invoke this interface
 ** from SQL.  ^The [sqlite3_wal_autocheckpoint()] interface and the
 ** [wal_autocheckpoint pragma] can be used to cause this interface to be
 ** run whenever the WAL reaches a certain size threshold.
 **
 ** See also: [sqlite3_wal_checkpoint_v2()]
 */
 SQLITE_API int sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb);
 
 /*
 ** CAPI3REF: Checkpoint a database
 **
 ** Run a checkpoint operation on WAL database zDb attached to database 
 ** handle db. The specific operation is determined by the value of the 
 ** eMode parameter:
 **
 ** <dl>
 ** <dt>SQLITE_CHECKPOINT_PASSIVE<dd>
 **   Checkpoint as many frames as possible without waiting for any database 
 **   readers or writers to finish. Sync the db file if all frames in the log
 **   are checkpointed. This mode is the same as calling 
-**   sqlite3_wal_checkpoint(). The busy-handler callback is never invoked.
+**   sqlite3_wal_checkpoint(). The [sqlite3_busy_handler|busy-handler callback]
+**   is never invoked.
 **
 ** <dt>SQLITE_CHECKPOINT_FULL<dd>
-**   This mode blocks (calls the busy-handler callback) until there is no
+**   This mode blocks (it invokes the
+**   [sqlite3_busy_handler|busy-handler callback]) until there is no
 **   database writer and all readers are reading from the most recent database
 **   snapshot. It then checkpoints all frames in the log file and syncs the
 **   database file. This call blocks database writers while it is running,
 **   but not database readers.
 **
 ** <dt>SQLITE_CHECKPOINT_RESTART<dd>
 **   This mode works the same way as SQLITE_CHECKPOINT_FULL, except after 
-**   checkpointing the log file it blocks (calls the busy-handler callback)
+**   checkpointing the log file it blocks (calls the 
+**   [sqlite3_busy_handler|busy-handler callback])
 **   until all readers are reading from the database file only. This ensures 
 **   that the next client to write to the database file restarts the log file 
 **   from the beginning. This call blocks database writers while it is running,
 **   but not database readers.
 ** </dl>
 **
 ** If pnLog is not NULL, then *pnLog is set to the total number of frames in
 ** the log file before returning. If pnCkpt is not NULL, then *pnCkpt is set to
 ** the total number of checkpointed frames (including any that were already
 ** checkpointed when this function is called). *pnLog and *pnCkpt may be
@@ skipping 46 matching lines @@
 **
 ** These constants can be used as the 3rd parameter to
 ** [sqlite3_wal_checkpoint_v2()].  See the [sqlite3_wal_checkpoint_v2()]
 ** documentation for additional information about the meaning and use of
 ** each of these values.
 */
 #define SQLITE_CHECKPOINT_PASSIVE 0
 #define SQLITE_CHECKPOINT_FULL    1
 #define SQLITE_CHECKPOINT_RESTART 2
 
+/*
+** CAPI3REF: Virtual Table Interface Configuration
+**
+** This function may be called by either the [xConnect] or [xCreate] method
+** of a [virtual table] implementation to configure
+** various facets of the virtual table interface.
+**
+** If this interface is invoked outside the context of an xConnect or
+** xCreate virtual table method then the behavior is undefined.
+**
+** At present, there is only one option that may be configured using
+** this function. (See [SQLITE_VTAB_CONSTRAINT_SUPPORT].)  Further options
+** may be added in the future.
+*/
+SQLITE_API int sqlite3_vtab_config(sqlite3*, int op, ...);
+
+/*
+** CAPI3REF: Virtual Table Configuration Options
+**
+** These macros define the various options to the
+** [sqlite3_vtab_config()] interface that [virtual table] implementations
+** can use to customize and optimize their behavior.
+**
+** <dl>
+** <dt>SQLITE_VTAB_CONSTRAINT_SUPPORT
+** <dd>Calls of the form
+** [sqlite3_vtab_config](db,SQLITE_VTAB_CONSTRAINT_SUPPORT,X) are supported,
+** where X is an integer.  If X is zero, then the [virtual table] whose
+** [xCreate] or [xConnect] method invoked [sqlite3_vtab_config()] does not
+** support constraints.  In this configuration (which is the default) if
+** a call to the [xUpdate] method returns [SQLITE_CONSTRAINT], then the entire
+** statement is rolled back as if [ON CONFLICT | OR ABORT] had been
+** specified as part of the users SQL statement, regardless of the actual
+** ON CONFLICT mode specified.
+**
+** If X is non-zero, then the virtual table implementation guarantees
+** that if [xUpdate] returns [SQLITE_CONSTRAINT], it will do so before
+** any modifications to internal or persistent data structures have been made.
+** If the [ON CONFLICT] mode is ABORT, FAIL, IGNORE or ROLLBACK, SQLite 
+** is able to roll back a statement or database transaction, and abandon
+** or continue processing the current SQL statement as appropriate. 
+** If the ON CONFLICT mode is REPLACE and the [xUpdate] method returns
+** [SQLITE_CONSTRAINT], SQLite handles this as if the ON CONFLICT mode
+** had been ABORT.
+**
+** Virtual table implementations that are required to handle OR REPLACE
+** must do so within the [xUpdate] method. If a call to the 
+** [sqlite3_vtab_on_conflict()] function indicates that the current ON 
+** CONFLICT policy is REPLACE, the virtual table implementation should 
+** silently replace the appropriate rows within the xUpdate callback and
+** return SQLITE_OK. Or, if this is not possible, it may return
+** SQLITE_CONSTRAINT, in which case SQLite falls back to OR ABORT 
+** constraint handling.
+** </dl>
+*/
+#define SQLITE_VTAB_CONSTRAINT_SUPPORT 1
+
+/*
+** CAPI3REF: Determine The Virtual Table Conflict Policy
+**
+** This function may only be called from within a call to the [xUpdate] method
+** of a [virtual table] implementation for an INSERT or UPDATE operation. ^The
+** value returned is one of [SQLITE_ROLLBACK], [SQLITE_IGNORE], [SQLITE_FAIL],
+** [SQLITE_ABORT], or [SQLITE_REPLACE], according to the [ON CONFLICT] mode
+** of the SQL statement that triggered the call to the [xUpdate] method of the
+** [virtual table].
+*/
+SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *);
+
+/*
+** CAPI3REF: Conflict resolution modes
+** KEYWORDS: {conflict resolution mode}
+**
+** These constants are returned by [sqlite3_vtab_on_conflict()] to
+** inform a [virtual table] implementation what the [ON CONFLICT] mode
+** is for the SQL statement being evaluated.
+**
+** Note that the [SQLITE_IGNORE] constant is also used as a potential
+** return value from the [sqlite3_set_authorizer()] callback and that
+** [SQLITE_ABORT] is also a [result code].
+*/
+#define SQLITE_ROLLBACK 1
+/* #define SQLITE_IGNORE 2 // Also used by sqlite3_authorizer() callback */
+#define SQLITE_FAIL     3
+/* #define SQLITE_ABORT 4  // Also an error code */
+#define SQLITE_REPLACE  5
+
+
 
 /* Begin recover.patch for Chromium */
 /*
 ** Call to initialize the recover virtual-table modules (see recover.c).
 **
 ** This could be loaded by default in main.c, but that would make the
 ** virtual table available to Web SQL.  Breaking it out allows only
 ** selected users to enable it (currently sql/recovery.cc).
 */
 int recoverVtableInit(sqlite3 *db);
 /* End recover.patch for Chromium */
 
 /*
 ** Undo the hack that converts floating point types to integer for
 ** builds on processors without floating point support.
 */
 #ifdef SQLITE_OMIT_FLOATING_POINT
 # undef double
 #endif
 
 #ifdef __cplusplus
 }  /* End of the 'extern "C"' block */
 #endif
-#endif
+#endif /* _SQLITE3_H_ */
 
 /*
 ** 2010 August 30
 **
 ** The author disclaims copyright to this source code.  In place of
 ** a legal notice, here is a blessing:
 **
 **    May you do good and not evil.
 **    May you find forgiveness for yourself and forgive others.
 **    May you share freely, never taking more than you give.
 **
 *************************************************************************
 */
 
 #ifndef _SQLITE3RTREE_H_
 #define _SQLITE3RTREE_H_
 
 
 #ifdef __cplusplus
 extern "C" {
 #endif
 
 typedef struct sqlite3_rtree_geometry sqlite3_rtree_geometry;
+typedef struct sqlite3_rtree_query_info sqlite3_rtree_query_info;
+
+/* The double-precision datatype used by RTree depends on the
+** SQLITE_RTREE_INT_ONLY compile-time option.
+*/
+#ifdef SQLITE_RTREE_INT_ONLY
+  typedef sqlite3_int64 sqlite3_rtree_dbl;
+#else
+  typedef double sqlite3_rtree_dbl;
+#endif
 
 /*
 ** Register a geometry callback named zGeom that can be used as part of an
 ** R-Tree geometry query as follows:
 **
 **   SELECT ... FROM <rtree> WHERE <rtree col> MATCH $zGeom(... params ...)
 */
 SQLITE_API int sqlite3_rtree_geometry_callback(
   sqlite3 *db,
   const char *zGeom,
-  int (*xGeom)(sqlite3_rtree_geometry *, int nCoord, double *aCoord, int *pRes),
+  int (*xGeom)(sqlite3_rtree_geometry*, int, sqlite3_rtree_dbl*,int*),
   void *pContext
 );
 
 
 /*
 ** A pointer to a structure of the following type is passed as the first
 ** argument to callbacks registered using rtree_geometry_callback().
 */
 struct sqlite3_rtree_geometry {
   void *pContext;                 /* Copy of pContext passed to s_r_g_c() */
   int nParam;                     /* Size of array aParam[] */
-  double *aParam;                 /* Parameters passed to SQL geom function */
+  sqlite3_rtree_dbl *aParam;      /* Parameters passed to SQL geom function */
   void *pUser;                    /* Callback implementation user data */
   void (*xDelUser)(void *);       /* Called by SQLite to clean up pUser */
 };
 
+/*
+** Register a 2nd-generation geometry callback named zScore that can be 
+** used as part of an R-Tree geometry query as follows:
+**
+**   SELECT ... FROM <rtree> WHERE <rtree col> MATCH $zQueryFunc(... params ...)
+*/
+SQLITE_API int sqlite3_rtree_query_callback(
+  sqlite3 *db,
+  const char *zQueryFunc,
+  int (*xQueryFunc)(sqlite3_rtree_query_info*),
+  void *pContext,
+  void (*xDestructor)(void*)
+);
+
+
+/*
+** A pointer to a structure of the following type is passed as the 
+** argument to scored geometry callback registered using
+** sqlite3_rtree_query_callback().
+**
+** Note that the first 5 fields of this structure are identical to
+** sqlite3_rtree_geometry.  This structure is a subclass of
+** sqlite3_rtree_geometry.
+*/
+struct sqlite3_rtree_query_info {
+  void *pContext;                   /* pContext from when function registered */
+  int nParam;                       /* Number of function parameters */
+  sqlite3_rtree_dbl *aParam;        /* value of function parameters */
+  void *pUser;                      /* callback can use this, if desired */
+  void (*xDelUser)(void*);          /* function to free pUser */
+  sqlite3_rtree_dbl *aCoord;        /* Coordinates of node or entry to check */
+  unsigned int *anQueue;            /* Number of pending entries in the queue */
+  int nCoord;                       /* Number of coordinates */
+  int iLevel;                       /* Level of current node or entry */
+  int mxLevel;                      /* The largest iLevel value in the tree */
+  sqlite3_int64 iRowid;             /* Rowid for current entry */
+  sqlite3_rtree_dbl rParentScore;   /* Score of parent node */
+  int eParentWithin;                /* Visibility of parent node */
+  int eWithin;                      /* OUT: Visiblity */
+  sqlite3_rtree_dbl rScore;         /* OUT: Write the score here */
+};
+
+/*
+** Allowed values for sqlite3_rtree_query.eWithin and .eParentWithin.
+*/
+#define NOT_WITHIN       0   /* Object completely outside of query region */
+#define PARTLY_WITHIN    1   /* Object partially overlaps query region */
+#define FULLY_WITHIN     2   /* Object fully contained within query region */
+
 
 #ifdef __cplusplus
 }  /* end of the 'extern "C"' block */
 #endif
 
 #endif  /* ifndef _SQLITE3RTREE_H_ */