cc: Clean up tilings in UpdateTiles as well as in AppendQuads.

cc/layers/picture_layer_impl_unittest.cc

 // Copyright 2013 The Chromium Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 
 #include "cc/layers/picture_layer_impl.h"
 
 #include <algorithm>
 #include <limits>
 #include <set>
 #include <utility>
@@ skipping 618 matching lines @@
   scoped_refptr<FakePicturePileImpl> active_pile =
       FakePicturePileImpl::CreateFilledPile(tile_size, layer_bounds);
   scoped_refptr<FakePicturePileImpl> lost_pile =
       FakePicturePileImpl::CreateFilledPile(tile_size, layer_bounds);
 
   SetupPendingTreeWithFixedTileSize(lost_pile, gfx::Size(50, 50), Region());
   ActivateTree();
   // Add a non-shared tiling on the active tree.
   PictureLayerTiling* tiling = active_layer_->AddTiling(3.f);
   tiling->CreateAllTilesForTesting();
+
+  // Ensure UpdateTiles won't remove any tilings.
+  active_layer_->MarkAllTilingsUsed();
+
   // Then setup a new pending tree and activate it.
   SetupTreesWithFixedTileSize(pending_pile, active_pile, gfx::Size(50, 50),
                               layer_invalidation);
 
   EXPECT_EQ(2u, pending_layer_->num_tilings());
   EXPECT_EQ(3u, active_layer_->num_tilings());
 
   const PictureLayerTilingSet* tilings = pending_layer_->tilings();
   EXPECT_GT(tilings->num_tilings(), 0u);
   for (size_t i = 0; i < tilings->num_tilings(); ++i) {
@@ skipping 263 matching lines @@
   // Set up the high and low res tilings before pinch zoom.
   SetupTrees(pending_pile, active_pile);
   ResetTilingsAndRasterScales();
 
   SetContentsScaleOnBothLayers(2.f, 1.0f, 2.f, 1.0f, false);
   EXPECT_BOTH_EQ(num_tilings(), 2u);
   EXPECT_BOTH_EQ(tilings()->tiling_at(0)->contents_scale(), 2.f);
   EXPECT_BOTH_EQ(tilings()->tiling_at(1)->contents_scale(),
                  2.f * low_res_factor);
 
+  // Ensure UpdateTiles won't remove any tilings.
+  active_layer_->MarkAllTilingsUsed();
+
   // Start a pinch gesture.
   host_impl_.PinchGestureBegin();
 
   // Zoom out by a small amount. We should create a tiling at half
   // the scale (2/kMaxScaleRatioDuringPinch).
   SetContentsScaleOnBothLayers(1.8f, 1.0f, 1.8f, 1.0f, false);
   EXPECT_EQ(3u, active_layer_->tilings()->num_tilings());
   EXPECT_FLOAT_EQ(2.0f,
                   active_layer_->tilings()->tiling_at(0)->contents_scale());
   EXPECT_FLOAT_EQ(1.0f,
                   active_layer_->tilings()->tiling_at(1)->contents_scale());
   EXPECT_FLOAT_EQ(2.0f * low_res_factor,
                   active_layer_->tilings()->tiling_at(2)->contents_scale());
 
+  // Ensure UpdateTiles won't remove any tilings.
+  active_layer_->MarkAllTilingsUsed();
+
   // Zoom out further, close to our low-res scale factor. We should
   // use that tiling as high-res, and not create a new tiling.
   SetContentsScaleOnBothLayers(low_res_factor * 2.1f, 1.0f,
                                low_res_factor * 2.1f, 1.0f, false);
   EXPECT_EQ(3u, active_layer_->tilings()->num_tilings());
 
   // Zoom in a lot now. Since we increase by increments of
   // kMaxScaleRatioDuringPinch, this will create a new tiling at 4.0.
   SetContentsScaleOnBothLayers(3.8f, 1.0f, 3.8f, 1.f, false);
   EXPECT_EQ(4u, active_layer_->tilings()->num_tilings());
@@ skipping 16 matching lines @@
   EXPECT_EQ(0u, active_layer_->tilings()->num_tilings());
 
   // Set up the high and low res tilings before pinch zoom.
   SetContentsScaleOnBothLayers(0.24f, 1.0f, 0.24f, 1.0f, false);
   EXPECT_EQ(2u, active_layer_->tilings()->num_tilings());
   EXPECT_FLOAT_EQ(0.24f,
                   active_layer_->tilings()->tiling_at(0)->contents_scale());
   EXPECT_FLOAT_EQ(0.0625f,
                   active_layer_->tilings()->tiling_at(1)->contents_scale());
 
+  // Ensure UpdateTiles won't remove any tilings.
+  active_layer_->MarkAllTilingsUsed();
+
   // Start a pinch gesture.
   host_impl_.PinchGestureBegin();
 
   // Zoom out by a small amount. We should create a tiling at half
   // the scale (1/kMaxScaleRatioDuringPinch).
   SetContentsScaleOnBothLayers(0.2f, 1.0f, 0.2f, 1.0f, false);
   EXPECT_EQ(3u, active_layer_->tilings()->num_tilings());
   EXPECT_FLOAT_EQ(0.24f,
                   active_layer_->tilings()->tiling_at(0)->contents_scale());
   EXPECT_FLOAT_EQ(0.12f,
                   active_layer_->tilings()->tiling_at(1)->contents_scale());
   EXPECT_FLOAT_EQ(0.0625,
                   active_layer_->tilings()->tiling_at(2)->contents_scale());
 
+  // Ensure UpdateTiles won't remove any tilings.
+  active_layer_->MarkAllTilingsUsed();
+
   // Zoom out further, close to our low-res scale factor. We should
   // use that tiling as high-res, and not create a new tiling.
   SetContentsScaleOnBothLayers(0.1f, 1.0f, 0.1f, 1.0f, false);
   EXPECT_EQ(3u, active_layer_->tilings()->num_tilings());
 
   // Zoom in. 0.25(desired_scale) should be snapped to 0.24 during zoom-in
   // because 0.25(desired_scale) is within the ratio(1.2).
   SetContentsScaleOnBothLayers(0.25f, 1.0f, 0.25f, 1.0f, false);
   EXPECT_EQ(3u, active_layer_->tilings()->num_tilings());
 
@@ skipping 19 matching lines @@
   float low_res_factor = host_impl_.settings().low_res_contents_scale_factor;
   EXPECT_LT(low_res_factor, 1.f);
 
   float scale = 1.f;
   float page_scale = 1.f;
 
   SetupTrees(pending_pile, active_pile);
   EXPECT_EQ(2u, active_layer_->tilings()->num_tilings());
   EXPECT_EQ(1.f, active_layer_->HighResTiling()->contents_scale());
 
+  // Ensure UpdateTiles won't remove any tilings. Note this is unrelated to
+  // |used_tilings| variable, and it's here only to ensure that active_layer_
+  // won't remove tilings before the test has a chance to verify behavior.
+  active_layer_->MarkAllTilingsUsed();
+
   // We only have ideal tilings, so they aren't removed.
   used_tilings.clear();
   active_layer_->CleanUpTilingsOnActiveLayer(used_tilings);
   EXPECT_EQ(2u, active_layer_->tilings()->num_tilings());
 
   host_impl_.PinchGestureBegin();
 
   // Changing the ideal but not creating new tilings.
   scale = 1.5f;
   page_scale = 1.5f;
@@ skipping 12 matching lines @@
   page_scale = 1.2f;
   SetContentsScaleOnBothLayers(1.2f, 1.f, page_scale, 1.f, false);
   ASSERT_EQ(4u, active_layer_->tilings()->num_tilings());
   EXPECT_FLOAT_EQ(
       1.f,
       active_layer_->tilings()->tiling_at(1)->contents_scale());
   EXPECT_FLOAT_EQ(
       1.f * low_res_factor,
       active_layer_->tilings()->tiling_at(3)->contents_scale());
 
+  // Ensure UpdateTiles won't remove any tilings.
+  active_layer_->MarkAllTilingsUsed();
+
   // Mark the non-ideal tilings as used. They won't be removed.
   used_tilings.clear();
   used_tilings.push_back(active_layer_->tilings()->tiling_at(1));
   used_tilings.push_back(active_layer_->tilings()->tiling_at(3));
   active_layer_->CleanUpTilingsOnActiveLayer(used_tilings);
   ASSERT_EQ(4u, active_layer_->tilings()->num_tilings());
 
   // Now move the ideal scale to 0.5. Our target stays 1.2.
   SetContentsScaleOnBothLayers(0.5f, 1.f, page_scale, 1.f, false);
 
@@ skipping 72 matching lines @@
   animating_transform = false;
   SetContentsScaleOnBothLayers(contents_scale,
                                device_scale,
                                page_scale,
                                maximum_animation_scale,
                                animating_transform);
   EXPECT_BOTH_EQ(HighResTiling()->contents_scale(), 1.f);
   EXPECT_BOTH_EQ(LowResTiling()->contents_scale(), low_res_factor);
   EXPECT_BOTH_EQ(num_tilings(), 2u);
 
+  // Ensure UpdateTiles won't remove any tilings.
+  active_layer_->MarkAllTilingsUsed();
+
   // Page scale animation, new high res, but no low res. We still have
   // a tiling at the previous scale, it's just not marked as low res on the
   // active layer. The pending layer drops non-ideal tilings.
   contents_scale = 2.f;
   page_scale = 2.f;
   maximum_animation_scale = 2.f;
   animating_transform = true;
   SetContentsScaleOnBothLayers(contents_scale,
                                device_scale,
                                page_scale,
@@ skipping 2446 matching lines @@
 
   float device_scale = 1.7f;
   float page_scale = 3.2f;
   float scale = 1.f;
 
   ResetTilingsAndRasterScales();
 
   SetContentsScaleOnBothLayers(scale, device_scale, page_scale, 1.f, false);
   ASSERT_EQ(1u, active_layer_->tilings()->num_tilings());
 
+  // Ensure UpdateTiles won't remove any tilings.
+  active_layer_->MarkAllTilingsUsed();
+
+  // Ensure UpdateTiles won't remove any tilings. Note this is unrelated to
+  // |used_tilings| variable, and it's here only to ensure that active_layer_
+  // won't remove tilings before the test has a chance to verify behavior.
+  active_layer_->MarkAllTilingsUsed();
+
   // We only have ideal tilings, so they aren't removed.
   used_tilings.clear();
   active_layer_->CleanUpTilingsOnActiveLayer(used_tilings);
   ASSERT_EQ(1u, active_layer_->tilings()->num_tilings());
 
   host_impl_.PinchGestureBegin();
 
   // Changing the ideal but not creating new tilings.
   scale *= 1.5f;
   page_scale *= 1.5f;
   SetContentsScaleOnBothLayers(scale, device_scale, page_scale, 1.f, false);
   ASSERT_EQ(1u, active_layer_->tilings()->num_tilings());
 
   // The tilings are still our target scale, so they aren't removed.
   used_tilings.clear();
   active_layer_->CleanUpTilingsOnActiveLayer(used_tilings);
   ASSERT_EQ(1u, active_layer_->tilings()->num_tilings());
 
   host_impl_.PinchGestureEnd();
 
   // Create a 1.2 scale tiling. Now we have 1.0 and 1.2 tilings. Ideal = 1.2.
   scale /= 4.f;
   page_scale /= 4.f;
   SetContentsScaleOnBothLayers(1.2f, device_scale, page_scale, 1.f, false);
   ASSERT_EQ(2u, active_layer_->tilings()->num_tilings());
   EXPECT_FLOAT_EQ(1.f,
                   active_layer_->tilings()->tiling_at(1)->contents_scale());
 
+  // Ensure UpdateTiles won't remove any tilings.
+  active_layer_->MarkAllTilingsUsed();
+
   // Mark the non-ideal tilings as used. They won't be removed.
   used_tilings.clear();
   used_tilings.push_back(active_layer_->tilings()->tiling_at(1));
   active_layer_->CleanUpTilingsOnActiveLayer(used_tilings);
   ASSERT_EQ(2u, active_layer_->tilings()->num_tilings());
 
   // Now move the ideal scale to 0.5. Our target stays 1.2.
   SetContentsScaleOnBothLayers(0.5f, device_scale, page_scale, 1.f, false);
 
   // The high resolution tiling is between target and ideal, so is not
@@ skipping 1229 matching lines @@
   result = layer->CalculateTileSize(gfx::Size(447, 400));
   EXPECT_EQ(result.width(), 448);
   EXPECT_EQ(result.height(), 448);
   result = layer->CalculateTileSize(gfx::Size(500, 499));
   EXPECT_EQ(result.width(), 512);
   EXPECT_EQ(result.height(), 500 + 2);
 }
 
 }  // namespace
 }  // namespace cc