Update reference builds to Chrome 32.0.1700.19

chrome_mac/Google Chrome Packaging/pkg-dmg

+#!/usr/bin/perl
+# ***** BEGIN LICENSE BLOCK *****
+# Version: MPL 1.1/GPL 2.0/LGPL 2.1
+#
+# The contents of this file are subject to the Mozilla Public License Version
+# 1.1 (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+# http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS IS" basis,
+# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+# for the specific language governing rights and limitations under the
+# License.
+#
+# The Original Code is pkg-dmg, a Mac OS X disk image (.dmg) packager
+#
+# The Initial Developer of the Original Code is
+# Mark Mentovai <mark@moxienet.com>.
+# Portions created by the Initial Developer are Copyright (C) 2005
+# the Initial Developer. All Rights Reserved.
+#
+# Contributor(s):
+#
+# Alternatively, the contents of this file may be used under the terms of
+# either the GNU General Public License Version 2 or later (the "GPL"), or
+# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+# in which case the provisions of the GPL or the LGPL are applicable instead
+# of those above. If you wish to allow use of your version of this file only
+# under the terms of either the GPL or the LGPL, and not to allow others to
+# use your version of this file under the terms of the MPL, indicate your
+# decision by deleting the provisions above and replace them with the notice
+# and other provisions required by the GPL or the LGPL. If you do not delete
+# the provisions above, a recipient may use your version of this file under
+# the terms of any one of the MPL, the GPL or the LGPL.
+#
+# ***** END LICENSE BLOCK *****
+
+use strict;
+use warnings;
+
+=pod
+
+=head1 NAME
+
+B<pkg-dmg> - Mac OS X disk image (.dmg) packager
+
+=head1 SYNOPSIS
+
+B<pkg-dmg>
+B<--source> I<source-folder>
+B<--target> I<target-image>
+[B<--format> I<format>]
+[B<--volname> I<volume-name>]
+[B<--tempdir> I<temp-dir>]
+[B<--mkdir> I<directory>]
+[B<--copy> I<source>[:I<dest>]]
+[B<--symlink> I<source>[:I<dest>]]
+[B<--license> I<file>]
+[B<--resource> I<file>]
+[B<--icon> I<icns-file>]
+[B<--attribute> I<a>:I<file>[:I<file>...]
+[B<--idme>]
+[B<--sourcefile>]
+[B<--verbosity> I<level>]
+[B<--dry-run>]
+
+=head1 DESCRIPTION
+
+I<pkg-dmg> takes a directory identified by I<source-folder> and transforms
+it into a disk image stored as I<target-image>.  The disk image will
+occupy the least space possible for its format, or the least space that the
+authors have been able to figure out how to achieve.
+
+=head1 OPTIONS
+
+=over 5
+
+==item B<--source> I<source-folder>
+
+Identifies the directory that will be packaged up.  This directory is not
+touched, a copy will be made in a temporary directory for staging purposes.
+See B<--tempdir>.
+
+==item B<--target> I<target-image>
+
+The disk image to create.  If it exists and is not in use, it will be
+overwritten.  If I<target-image> already contains a suitable extension,
+it will be used unmodified.  If no extension is present, or the extension
+is incorrect for the selected format, the proper extension will be added.
+See B<--format>.
+
+==item B<--format> I<format>
+
+The format to create the disk image in.  Valid values for I<format> are:
+     - UDZO - zlib-compressed, read-only; extension I<.dmg>
+     - UDBZ - bzip2-compressed, read-only; extension I<.dmg>;
+              create and use on 10.4 ("Tiger") and later only
+     - UDRO - uncompressed, read-only; extension I<.dmg>
+     - UDRW - uncompressed, read-write; extension I<.dmg>
+     - UDSP - uncompressed, read-write, sparse; extension I<.sparseimage>
+
+UDZO is the default format.
+
+See L<hdiutil(1)> for a description of these formats.
+
+=item B<--volname> I<volume-name>
+
+The name of the volume in the disk image.  If not specified, I<volume-name>
+defaults to the name of the source directory from B<--source>.
+
+=item B<--tempdir> I<temp-dir>
+
+A temporary directory to stage intermediate files in.  I<temp-dir> must
+have enough space available to accommodate twice the size of the files
+being packaged.  If not specified, defaults to the same directory that
+the I<target-image> is to be placed in.  B<pkg-dmg> will remove any
+temporary files it places in I<temp-dir>.
+
+=item B<--mkdir> I<directory>
+
+Specifies a directory that should be created in the disk image.
+I<directory> and any ancestor directories will be created.  This is
+useful in conjunction with B<--copy>, when copying files to directories
+that may not exist in I<source-folder>.  B<--mkdir> may appear multiple
+times.
+
+=item B<--copy> I<source>[:I<dest>]
+
+Additional files to copy into the disk image.  If I<dest> is
+specified, I<source> is copied to the location I<dest> identifies,
+otherwise, I<source> is copied to the root of the new volume.  B<--copy>
+provides a way to package up a I<source-folder> by adding files to it
+without modifying the original I<source-folder>.  B<--copy> may appear
+multiple times.
+
+This option is useful for adding .DS_Store files and window backgrounds
+to disk images.
+
+=item B<--symlink> I<source>[:I<dest>]
+
+Like B<--copy>, but allows symlinks to point out of the volume. Empty symlink
+destinations are interpreted as "like the source path, but inside the dmg"
+
+This option is useful for adding symlinks to external resources,
+e.g. to /Applications.
+
+=item B<--license> I<file>
+
+A plain text file containing a license agreement to be displayed before
+the disk image is mounted.  English is the only supported language.  To
+include license agreements in other languages, in multiple languages,
+or to use formatted text, prepare a resource and use L<--resource>.
+
+=item B<--resource> I<file>
+
+A resource file to merge into I<target-image>.  If I<format> is UDZO, UDBZ,
+or UDRO, the disk image will be flattened to a single-fork file that contains
+the resource but may be freely transferred without any special encodings.
+I<file> must be in a format suitable for L<Rez(1)>.  See L<Rez(1)> for a
+description of the format, and L<hdiutil(1)> for a discussion on flattened
+disk images.  B<--resource> may appear multiple times.
+
+This option is useful for adding license agreements and other messages
+to disk images.
+
+=item B<--icon> I<icns-file>
+
+Specifies an I<icns> file that will be used as the icon for the root of
+the volume.  This file will be copied to the new volume and the custom
+icon attribute will be set on the root folder.
+
+=item B<--attribute> I<a>:I<file>[:I<file>...]
+
+Sets the attributes of I<file> to the attribute list in I<a>.  See
+L<SetFile(1)>
+
+=item B<--idme>
+
+Enable IDME to make the disk image "Internet-enabled."  The first time
+the image is mounted, if IDME processing is enabled on the system, the
+contents of the image will be copied out of the image and the image will
+be placed in the trash with IDME disabled.
+
+=item B<--sourcefile>
+
+If this option is present, I<source-folder> is treated as a file, and is
+placed as a file within the volume's root folder.  Without this option,
+I<source-folder> is treated as the volume root itself.
+
+=item B<--verbosity> I<level>
+
+Adjusts the level of loudness of B<pkg-dmg>.  The possible values for
+I<level> are:
+     0 - Only error messages are displayed.
+     1 - Print error messages and command invocations.
+     2 - Print everything, including command output.
+
+The default I<level> is 2.
+
+=item B<--dry-run>
+
+When specified, the commands that would be executed are printed, without
+actually executing them.  When commands depend on the output of previous
+commands, dummy values are displayed.
+
+=back
+
+=head1 NON-OPTIONS
+
+=over 5
+
+=item
+
+Resource forks aren't copied.
+
+=item
+
+The root folder of the created volume is designated as the folder
+to open when the volume is mounted.  See L<bless(8)>.
+
+=item
+
+All files in the volume are set to be world-readable, only writable
+by the owner, and world-executable when appropriate.  All other
+permissions bits are cleared.
+
+=item
+
+When possible, disk images are created without any partition tables.  This
+is what L<hdiutil(1)> refers to as I<-layout NONE>, and saves a handful of
+kilobytes.  The alternative, I<SPUD>, contains a partition table that
+is not terribly handy on disk images that are not intended to represent any
+physical disk.
+
+=item
+
+Read-write images are created with journaling off.  Any read-write image
+created by this tool is expected to be transient, and the goal of this tool
+is to create images which consume a minimum of space.
+
+=back
+
+=head1 EXAMPLE
+
+pkg-dmg --source /Applications/DeerPark.app --target ~/DeerPark.dmg
+  --sourcefile --volname DeerPark --icon ~/DeerPark.icns
+  --mkdir /.background
+  --copy DeerParkBackground.png:/.background/background.png
+  --copy DeerParkDSStore:/.DS_Store
+  --symlink /Applications:"/Drag to here"
+
+=head1 REQUIREMENTS
+
+I<pkg-dmg> has been tested with Mac OS X releases 10.2 ("Jaguar")
+through 10.4 ("Tiger").  Certain adjustments to behavior are made
+depending on the host system's release.  Mac OS X 10.3 ("Panther") or
+later are recommended.
+
+=head1 LICENSE
+
+MPL 1.1/GPL 2.0/LGPL 2.1.  Your choice.
+
+=head1 AUTHOR
+
+Mark Mentovai
+
+=head1 SEE ALSO
+
+L<bless(8)>, L<diskutil(8)>, L<hdid(8)>, L<hdiutil(1)>, L<Rez(1)>,
+L<rsync(1)>, L<SetFile(1)>
+
+=cut
+
+use Fcntl;
+use POSIX;
+use Getopt::Long;
+
+sub argumentEscape(@);
+sub cleanupDie($);
+sub command(@);
+sub commandInternal($@);
+sub commandInternalVerbosity($$@);
+sub commandOutput(@);
+sub commandOutputVerbosity($@);
+sub commandVerbosity($@);
+sub copyFiles($@);
+sub diskImageMaker($$$$$$$$);
+sub giveExtension($$);
+sub hdidMountImage($@);
+sub isFormatReadOnly($);
+sub licenseMaker($$);
+sub pathSplit($);
+sub setAttributes($@);
+sub trapSignal($);
+sub usage();
+
+# Variables used as globals
+my(@gCleanup, %gConfig, $gDarwinMajor, $gDryRun, $gVerbosity);
+
+# Use the commands by name if they're expected to be in the user's
+# $PATH (/bin:/sbin:/usr/bin:/usr/sbin).  Otherwise, go by absolute
+# path.  These may be overridden with --config.
+%gConfig = ('cmd_bless'          => 'bless',
+            'cmd_chmod'          => 'chmod',
+            'cmd_diskutil'       => 'diskutil',
+            'cmd_du'             => 'du',
+            'cmd_hdid'           => 'hdid',
+            'cmd_hdiutil'        => 'hdiutil',
+            'cmd_mkdir'          => 'mkdir',
+            'cmd_mktemp'         => 'mktemp',
+            'cmd_Rez'            => '/usr/bin/Rez',
+            'cmd_rm'             => 'rm',
+            'cmd_rsync'          => 'rsync',
+            'cmd_SetFile'        => '/usr/bin/SetFile',
+
+            # create_directly indicates whether hdiutil create supports
+            # -srcfolder and -srcdevice.  It does on >= 10.3 (Panther).
+            # This is fixed up for earlier systems below.  If false,
+            # hdiutil create is used to create empty disk images that
+            # are manually filled.
+            'create_directly'    => 1,
+
+            # If hdiutil attach -mountpoint exists, use it to avoid
+            # mounting disk images in the default /Volumes.  This reduces
+            # the likelihood that someone will notice a mounted image and
+            # interfere with it.  Only available on >= 10.3 (Panther),
+            # fixed up for earlier systems below.
+            #
+            # This is presently turned off for all systems, because there
+            # is an infrequent synchronization problem during ejection.
+            # diskutil eject might return before the image is actually
+            # unmounted.  If pkg-dmg then attempts to clean up its
+            # temporary directory, it could remove items from a read-write
+            # disk image or attempt to remove items from a read-only disk
+            # image (or a read-only item from a read-write image) and fail,
+            # causing pkg-dmg to abort.  This problem is experienced
+            # under Tiger, which appears to eject asynchronously where
+            # previous systems treated it as a synchronous operation.
+            # Using hdiutil attach -mountpoint didn't always keep images
+            # from showing up on the desktop anyway.
+            'hdiutil_mountpoint' => 0,
+
+            # hdiutil makehybrid results in optimized disk images that
+            # consume less space and mount more quickly.  Use it when
+            # it's available, but that's only on >= 10.3 (Panther).
+            # If false, hdiutil create is used instead.  Fixed up for
+            # earlier systems below.
+            'makehybrid'         => 1,
+
+            # hdiutil create doesn't allow specifying a folder to open
+            # at volume mount time, so those images are mounted and
+            # their root folders made holy with bless -openfolder.  But
+            # only on >= 10.3 (Panther).  Earlier systems are out of luck.
+            # Even on Panther, bless refuses to run unless root.
+            # Fixed up below.
+            'openfolder_bless'   => 1,
+
+            # It's possible to save a few more kilobytes by including the
+            # partition only without any partition table in the image.
+            # This is a good idea on any system, so turn this option off.
+            #
+            # Except it's buggy.  "-layout NONE" seems to be creating
+            # disk images with more data than just the partition table
+            # stripped out.  You might wind up losing the end of the
+            # filesystem - the last file (or several) might be incomplete.
+            'partition_table'    => 1,
+
+            # To create a partition table-less image from something
+            # created by makehybrid, the hybrid image needs to be
+            # mounted and a new image made from the device associated
+            # with the relevant partition.  This requires >= 10.4
+            # (Tiger), presumably because earlier systems have
+            # problems creating images from devices themselves attached
+            # to images.  If this is false, makehybrid images will
+            # have partition tables, regardless of the partition_table
+            # setting.  Fixed up for earlier systems below.
+            'recursive_access'   => 1);
+
+# --verbosity
+$gVerbosity = 2;
+
+# --dry-run
+$gDryRun = 0;
+
+# %gConfig fix-ups based on features and bugs present in certain releases.
+my($ignore, $uname_r, $uname_s);
+($uname_s, $ignore, $uname_r, $ignore, $ignore) = POSIX::uname();
+if($uname_s eq 'Darwin') {
+  ($gDarwinMajor, $ignore) = split(/\./, $uname_r, 2);
+
+  # $major is the Darwin major release, which for our purposes, is 4 higher
+  # than the interesting digit in a Mac OS X release.
+  if($gDarwinMajor <= 6) {
+    # <= 10.2 (Jaguar)
+    # hdiutil create does not support -srcfolder or -srcdevice
+    $gConfig{'create_directly'} = 0;
+    # hdiutil attach does not support -mountpoint
+    $gConfig{'hdiutil_mountpoint'} = 0;
+    # hdiutil mkhybrid does not exist
+    $gConfig{'makehybrid'} = 0;
+  }
+  if($gDarwinMajor <= 7) {
+    # <= 10.3 (Panther)
+    # Can't mount a disk image and then make a disk image from the device
+    $gConfig{'recursive_access'} = 0;
+    # bless does not support -openfolder on 10.2 (Jaguar) and must run
+    # as root under 10.3 (Panther)
+    $gConfig{'openfolder_bless'} = 0;
+  }
+}
+else {
+  # If it's not Mac OS X, just assume all of those good features are
+  # available.  They're not, but things will fail long before they
+  # have a chance to make a difference.
+  #
+  # Now, if someone wanted to document some of these private formats...
+  print STDERR ($0.": warning, not running on Mac OS X, ".
+   "this could be interesting.\n");
+}
+
+# Non-global variables used in Getopt
+my(@attributes, @copyFiles, @createSymlinks, $iconFile, $idme, $licenseFile,
+ @makeDirs, $outputFormat, @resourceFiles, $sourceFile, $sourceFolder,
+ $targetImage, $tempDir, $volumeName);
+
+# --format
+$outputFormat = 'UDZO';
+
+# --idme
+$idme = 0;
+
+# --sourcefile
+$sourceFile = 0;
+
+# Leaving this might screw up the Apple tools.
+delete $ENV{'NEXT_ROOT'};
+
+# This script can get pretty messy, so trap a few signals.
+$SIG{'INT'} = \&trapSignal;
+$SIG{'HUP'} = \&trapSignal;
+$SIG{'TERM'} = \&trapSignal;
+
+Getopt::Long::Configure('pass_through');
+GetOptions('source=s'    => \$sourceFolder,
+           'target=s'    => \$targetImage,
+           'volname=s'   => \$volumeName,
+           'format=s'    => \$outputFormat,
+           'tempdir=s'   => \$tempDir,
+           'mkdir=s'     => \@makeDirs,
+           'copy=s'      => \@copyFiles,
+           'symlink=s'   => \@createSymlinks,
+           'license=s'   => \$licenseFile,
+           'resource=s'  => \@resourceFiles,
+           'icon=s'      => \$iconFile,
+           'attribute=s' => \@attributes,
+           'idme'        => \$idme,
+           'sourcefile'  => \$sourceFile,
+           'verbosity=i' => \$gVerbosity,
+           'dry-run'     => \$gDryRun,
+           'config=s'    => \%gConfig); # "hidden" option not in usage()
+
+if(@ARGV) {
+  # All arguments are parsed by Getopt
+  usage();
+  exit(1);
+}
+
+if($gVerbosity<0 || $gVerbosity>2) {
+  usage();
+  exit(1);
+}
+
+if(!defined($sourceFolder) || $sourceFolder eq '' ||
+ !defined($targetImage) || $targetImage eq '') {
+  # --source and --target are required arguments
+  usage();
+  exit(1);
+}
+
+# Make sure $sourceFolder doesn't contain trailing slashes.  It messes with
+# rsync.
+while(substr($sourceFolder, -1) eq '/') {
+  chop($sourceFolder);
+}
+
+if(!defined($volumeName)) {
+  # Default volumeName is the name of the source directory.
+  my(@components);
+  @components = pathSplit($sourceFolder);
+  $volumeName = pop(@components);
+}
+
+my(@tempDirComponents, $targetImageFilename);
+@tempDirComponents = pathSplit($targetImage);
+$targetImageFilename = pop(@tempDirComponents);
+
+if(defined($tempDir)) {
+  @tempDirComponents = pathSplit($tempDir);
+}
+else {
+  # Default tempDir is the same directory as what is specified for
+  # targetImage
+  $tempDir = join('/', @tempDirComponents);
+}
+
+# Ensure that the path of the target image has a suitable extension.  If
+# it didn't, hdiutil would add one, and we wouldn't be able to find the
+# file.
+#
+# Note that $targetImageFilename is not being reset.  This is because it's
+# used to build other names below, and we don't need to be adding all sorts
+# of extra unnecessary extensions to the name.
+my($originalTargetImage, $requiredExtension);
+$originalTargetImage = $targetImage;
+if($outputFormat eq 'UDSP') {
+  $requiredExtension = '.sparseimage';
+}
+else {
+  $requiredExtension = '.dmg';
+}
+$targetImage = giveExtension($originalTargetImage, $requiredExtension);
+
+if($targetImage ne $originalTargetImage) {
+  print STDERR ($0.": warning: target image extension is being added\n");
+  print STDERR ('  The new filename is '.
+   giveExtension($targetImageFilename,$requiredExtension)."\n");
+}
+
+# Make a temporary directory in $tempDir for our own nefarious purposes.
+my(@output, $tempSubdir, $tempSubdirTemplate);
+$tempSubdirTemplate=join('/', @tempDirComponents,
+ 'pkg-dmg.'.$$.'.XXXXXXXX');
+if(!(@output = commandOutput($gConfig{'cmd_mktemp'}, '-d',
+ $tempSubdirTemplate)) || $#output != 0) {
+  cleanupDie('mktemp failed');
+}
+
+if($gDryRun) {
+  (@output)=($tempSubdirTemplate);
+}
+
+($tempSubdir) = @output;
+
+push(@gCleanup,
+ sub {commandVerbosity(0, $gConfig{'cmd_rm'}, '-rf', $tempSubdir);});
+
+my($tempMount, $tempRoot, @tempsToMake);
+$tempRoot = $tempSubdir.'/stage';
+$tempMount = $tempSubdir.'/mount';
+push(@tempsToMake, $tempRoot);
+if($gConfig{'hdiutil_mountpoint'}) {
+  push(@tempsToMake, $tempMount);
+}
+
+if(command($gConfig{'cmd_mkdir'}, @tempsToMake) != 0) {
+  cleanupDie('mkdir tempRoot/tempMount failed');
+}
+
+# This cleanup object is not strictly necessary, because $tempRoot is inside
+# of $tempSubdir, but the rest of the script relies on this object being
+# on the cleanup stack and expects to remove it.
+push(@gCleanup,
+ sub {commandVerbosity(0, $gConfig{'cmd_rm'}, '-rf', $tempRoot);});
+
+# If $sourceFile is true, it means that $sourceFolder is to be treated as
+# a file and placed as a file within the volume root, as opposed to being
+# treated as the volume root itself.  rsync will do this by default, if no
+# trailing '/' is present.  With a trailing '/', $sourceFolder becomes
+# $tempRoot, instead of becoming an entry in $tempRoot.
+if(command($gConfig{'cmd_rsync'}, '-aC', '--include', '*.so',
+ '--copy-unsafe-links', $sourceFolder.($sourceFile?'':'/'),$tempRoot) != 0) {
+  cleanupDie('rsync failed');
+}
+
+if(@makeDirs) {
+  my($makeDir, @tempDirsToMake);
+  foreach $makeDir (@makeDirs) {
+    if($makeDir =~ /^\//) {
+      push(@tempDirsToMake, $tempRoot.$makeDir);
+    }
+    else {
+      push(@tempDirsToMake, $tempRoot.'/'.$makeDir);
+    }
+  }
+  if(command($gConfig{'cmd_mkdir'}, '-p', @tempDirsToMake) != 0) {
+    cleanupDie('mkdir failed');
+  }
+}
+
+# copy files and/or create symlinks
+copyFiles($tempRoot, 'copy', @copyFiles);
+copyFiles($tempRoot, 'symlink', @createSymlinks);
+
+if($gConfig{'create_directly'}) {
+  # If create_directly is false, the contents will be rsynced into a
+  # disk image and they would lose their attributes.
+  setAttributes($tempRoot, @attributes);
+}
+
+if(defined($iconFile)) {
+  if(command($gConfig{'cmd_rsync'}, '-aC', '--include', '*.so',
+   '--copy-unsafe-links', $iconFile, $tempRoot.'/.VolumeIcon.icns') != 0) {
+    cleanupDie('rsync failed for volume icon');
+  }
+
+  # It's pointless to set the attributes of the root when diskutil create
+  # -srcfolder is being used.  In that case, the attributes will be set
+  # later, after the image is already created.
+  if(isFormatReadOnly($outputFormat) &&
+   (command($gConfig{'cmd_SetFile'}, '-a', 'C', $tempRoot) != 0)) {
+    cleanupDie('SetFile failed');
+  }
+}
+
+if(command($gConfig{'cmd_chmod'}, '-R', 'a+rX,a-st,u+w,go-w',
+ $tempRoot) != 0) {
+  cleanupDie('chmod failed');
+}
+
+my($unflattenable);
+if(isFormatReadOnly($outputFormat)) {
+  $unflattenable = 1;
+}
+else {
+  $unflattenable = 0;
+}
+
+diskImageMaker($tempRoot, $targetImage, $outputFormat, $volumeName,
+ $tempSubdir, $tempMount, $targetImageFilename, defined($iconFile));
+
+if(defined($licenseFile) && $licenseFile ne '') {
+  my($licenseResource);
+  $licenseResource = $tempSubdir.'/license.r';
+  if(!licenseMaker($licenseFile, $licenseResource)) {
+    cleanupDie('licenseMaker failed');
+  }
+  push(@resourceFiles, $licenseResource);
+  # Don't add a cleanup object because licenseResource is in tempSubdir.
+}
+
+if(@resourceFiles) {
+  # Add resources, such as a license agreement.
+
+  # Only unflatten read-only and compressed images.  It's not supported
+  # on other image times.
+  if($unflattenable &&
+   (command($gConfig{'cmd_hdiutil'}, 'unflatten', $targetImage)) != 0) {
+    cleanupDie('hdiutil unflatten failed');
+  }
+  # Don't push flatten onto the cleanup stack.  If we fail now, we'll be
+  # removing $targetImage anyway.
+
+  # Type definitions come from Carbon.r.
+  if(command($gConfig{'cmd_Rez'}, 'Carbon.r', @resourceFiles, '-a', '-o',
+   $targetImage) != 0) {
+    cleanupDie('Rez failed');
+  }
+
+  # Flatten.  This merges the resource fork into the data fork, so no
+  # special encoding is needed to transfer the file.
+  if($unflattenable &&
+   (command($gConfig{'cmd_hdiutil'}, 'flatten', $targetImage)) != 0) {
+    cleanupDie('hdiutil flatten failed');
+  }
+}
+
+# $tempSubdir is no longer needed.  It's buried on the stack below the
+# rm of the fresh image file.  Splice in this fashion is equivalent to
+# pop-save, pop, push-save.
+splice(@gCleanup, -2, 1);
+# No need to remove licenseResource separately, it's in tempSubdir.
+if(command($gConfig{'cmd_rm'}, '-rf', $tempSubdir) != 0) {
+  cleanupDie('rm -rf tempSubdir failed');
+}
+
+if($idme) {
+  if(command($gConfig{'cmd_hdiutil'}, 'internet-enable', '-yes',
+   $targetImage) != 0) {
+    cleanupDie('hdiutil internet-enable failed');
+  }
+}
+
+# Done.
+
+exit(0);
+
+# argumentEscape(@arguments)
+#
+# Takes a list of @arguments and makes them shell-safe.
+sub argumentEscape(@) {
+  my(@arguments);
+  @arguments = @_;
+  my($argument, @argumentsOut);
+  foreach $argument (@arguments) {
+    $argument =~ s%([^A-Za-z0-9_\-/.=+,])%\\$1%g;
+    push(@argumentsOut, $argument);
+  }
+  return @argumentsOut;
+}
+
+# cleanupDie($message)
+#
+# Displays $message as an error message, and then runs through the
+# @gCleanup stack, performing any cleanup operations needed before
+# exiting.  Does not return, exits with exit status 1.
+sub cleanupDie($) {
+  my($message);
+  ($message) = @_;
+  print STDERR ($0.': '.$message.(@gCleanup?' (cleaning up)':'')."\n");
+  while(@gCleanup) {
+    my($subroutine);
+    $subroutine = pop(@gCleanup);
+    &$subroutine;
+  }
+  exit(1);
+}
+
+# command(@arguments)
+#
+# Runs the specified command at the verbosity level defined by $gVerbosity.
+# Returns nonzero on failure, returning the exit status if appropriate.
+# Discards command output.
+sub command(@) {
+  my(@arguments);
+  @arguments = @_;
+  return commandVerbosity($gVerbosity,@arguments);
+}
+
+# commandInternal($command, @arguments)
+#
+# Runs the specified internal command at the verbosity level defined by
+# $gVerbosity.
+# Returns zero(!) on failure, because commandInternal is supposed to be a
+# direct replacement for the Perl system call wrappers, which, unlike shell
+# commands and C equivalent system calls, return true (instead of 0) to
+# indicate success.
+sub commandInternal($@) {
+  my(@arguments, $command);
+  ($command, @arguments) = @_;
+  return commandInternalVerbosity($gVerbosity, $command, @arguments);
+}
+
+# commandInternalVerbosity($verbosity, $command, @arguments)
+#
+# Run an internal command, printing a bogus command invocation message if
+# $verbosity is true.
+#
+# If $command is unlink:
+# Removes the files specified by @arguments.  Wraps unlink.
+#
+# If $command is symlink:
+# Creates the symlink specified by @arguments. Wraps symlink.
+sub commandInternalVerbosity($$@) {
+  my(@arguments, $command, $verbosity);
+  ($verbosity, $command, @arguments) = @_;
+  if($command eq 'unlink') {
+    if($verbosity || $gDryRun) {
+      print(join(' ', 'rm', '-f', argumentEscape(@arguments))."\n");
+    }
+    if($gDryRun) {
+      return $#arguments+1;
+    }
+    return unlink(@arguments);
+  }
+  elsif($command eq 'symlink') {
+    if($verbosity || $gDryRun) {
+      print(join(' ', 'ln', '-s', argumentEscape(@arguments))."\n");
+    }
+    if($gDryRun) {
+      return 1;
+    }
+    my($source, $target);
+    ($source, $target) = @arguments;
+    return symlink($source, $target);
+  }
+}
+
+# commandOutput(@arguments)
+#
+# Runs the specified command at the verbosity level defined by $gVerbosity.
+# Output is returned in an array of lines.  undef is returned on failure.
+# The exit status is available in $?.
+sub commandOutput(@) {
+  my(@arguments);
+  @arguments = @_;
+  return commandOutputVerbosity($gVerbosity, @arguments);
+}
+
+# commandOutputVerbosity($verbosity, @arguments)
+#
+# Runs the specified command at the verbosity level defined by the
+# $verbosity argument.  Output is returned in an array of lines.  undef is
+# returned on failure.  The exit status is available in $?.
+#
+# If an error occurs in fork or exec, an error message is printed to
+# stderr and undef is returned.
+#
+# If $verbosity is 0, the command invocation is not printed, and its
+# stdout is not echoed back to stdout.
+#
+# If $verbosity is 1, the command invocation is printed.
+#
+# If $verbosity is 2, the command invocation is printed and the output
+# from stdout is echoed back to stdout.
+#
+# Regardless of $verbosity, stderr is left connected.
+sub commandOutputVerbosity($@) {
+  my(@arguments, $verbosity);
+  ($verbosity, @arguments) = @_;
+  my($pid);
+  if($verbosity || $gDryRun) {
+    print(join(' ', argumentEscape(@arguments))."\n");
+  }
+  if($gDryRun) {
+    return(1);
+  }
+  if (!defined($pid = open(*COMMAND, '-|'))) {
+    printf STDERR ($0.': fork: '.$!."\n");
+    return undef;
+  }
+  elsif ($pid) {
+    # parent
+    my(@lines);
+    while(!eof(*COMMAND)) {
+      my($line);
+      chop($line = <COMMAND>);
+      if($verbosity > 1) {
+        print($line."\n");
+      }
+      push(@lines, $line);
+    }
+    close(*COMMAND);
+    if ($? == -1) {
+      printf STDERR ($0.': fork: '.$!."\n");
+      return undef;
+    }
+    elsif ($? & 127) {
+      printf STDERR ($0.': exited on signal '.($? & 127).
+       ($? & 128 ? ', core dumped' : '')."\n");
+      return undef;
+    }
+    return @lines;
+  }
+  else {
+    # child; this form of exec is immune to shell games
+    if(!exec {$arguments[0]} (@arguments)) {
+      printf STDERR ($0.': exec: '.$!."\n");
+      exit(-1);
+    }
+  }
+}
+
+# commandVerbosity($verbosity, @arguments)
+#
+# Runs the specified command at the verbosity level defined by the
+# $verbosity argument.  Returns nonzero on failure, returning the exit
+# status if appropriate.  Discards command output.
+sub commandVerbosity($@) {
+  my(@arguments, $verbosity);
+  ($verbosity, @arguments) = @_;
+  if(!defined(commandOutputVerbosity($verbosity, @arguments))) {
+    return -1;
+  }
+  return $?;
+}
+
+# copyFiles($tempRoot, $method, @arguments)
+#
+# Copies files or create symlinks in the disk image.
+# See --copy and --symlink descriptions for details.
+# If $method is 'copy', @arguments are interpreted as source:target, if $method
+# is 'symlink', @arguments are interpreted as symlink:target.
+sub copyFiles($@) {
+  my(@fileList, $method, $tempRoot);
+  ($tempRoot, $method, @fileList) = @_;
+  my($file, $isSymlink);
+  $isSymlink = ($method eq 'symlink');
+  foreach $file (@fileList) {
+    my($source, $target);
+    ($source, $target) = split(/:/, $file);
+    if(!defined($target) and $isSymlink) {
+      # empty symlink targets would result in an invalid target and fail,
+      # but they shall be interpreted as "like source path, but inside dmg"
+      $target = $source;
+    }
+    if(!defined($target)) {
+      $target = $tempRoot;
+    }
+    elsif($target =~ /^\//) {
+      $target = $tempRoot.$target;
+    }
+    else {
+      $target = $tempRoot.'/'.$target;
+    }
+
+    my($success);
+    if($isSymlink) {
+      $success = commandInternal('symlink', $source, $target);
+    }
+    else {
+      $success = !command($gConfig{'cmd_rsync'}, '-aC', '--include', '*.so',
+                          '--copy-unsafe-links', $source, $target);
+    }
+    if(!$success) {
+      cleanupDie('copyFiles failed for method '.$method);
+    }
+  }
+}
+
+# diskImageMaker($source, $destination, $format, $name, $tempDir, $tempMount,
+#  $baseName, $setRootIcon)
+#
+# Creates a disk image in $destination of format $format corresponding to the
+# source directory $source.  $name is the volume name.  $tempDir is a good
+# place to write temporary files, which should be empty (aside from the other
+# things that this script might create there, like stage and mount).
+# $tempMount is a mount point for temporary disk images.  $baseName is the
+# name of the disk image, and is presently unused.  $setRootIcon is true if
+# a volume icon was added to the staged $source and indicates that the
+# custom volume icon bit on the volume root needs to be set.
+sub diskImageMaker($$$$$$$$) {
+  my($baseName, $destination, $format, $name, $setRootIcon, $source,
+   $tempDir, $tempMount);
+  ($source, $destination, $format, $name, $tempDir, $tempMount,
+   $baseName, $setRootIcon) = @_;
+  if(isFormatReadOnly($format)) {
+    my($uncompressedImage);
+
+    if($gConfig{'makehybrid'}) {
+      my($hybridImage);
+      $hybridImage = giveExtension($tempDir.'/hybrid', '.dmg');
+
+      if(command($gConfig{'cmd_hdiutil'}, 'makehybrid', '-hfs',
+       '-hfs-volume-name', $name,
+       ($gConfig{'openfolder_bless'} ? ('-hfs-openfolder', $source) : ()),
+       '-ov', $source, '-o', $hybridImage) != 0) {
+        cleanupDie('hdiutil makehybrid failed');
+      }
+
+      $uncompressedImage = $hybridImage;
+
+      # $source is no longer needed and will be removed before anything
+      # else can fail.  splice in this form is the same as pop/push.
+      splice(@gCleanup, -1, 1,
+       sub {commandInternalVerbosity(0, 'unlink', $hybridImage);});
+
+      if(command($gConfig{'cmd_rm'}, '-rf', $source) != 0) {
+        cleanupDie('rm -rf failed');
+      }
+
+      if(!$gConfig{'partition_table'} && $gConfig{'recursive_access'}) {
+        # Even if we do want to create disk images without partition tables,
+        # it's impossible unless recursive_access is set.
+        my($rootDevice, $partitionDevice, $partitionMountPoint);
+
+        if(!(($rootDevice, $partitionDevice, $partitionMountPoint) =
+         hdidMountImage($tempMount, '-readonly', $hybridImage))) {
+          cleanupDie('hdid mount failed');
+        }
+
+        push(@gCleanup, sub {commandVerbosity(0,
+         $gConfig{'cmd_diskutil'}, 'eject', $rootDevice);});
+
+        my($udrwImage);
+        $udrwImage = giveExtension($tempDir.'/udrw', '.dmg');
+
+        if(command($gConfig{'cmd_hdiutil'}, 'create', '-format', 'UDRW',
+         '-ov', '-srcdevice', $partitionDevice, $udrwImage) != 0) {
+          cleanupDie('hdiutil create failed');
+        }
+
+        $uncompressedImage = $udrwImage;
+
+        # Going to eject before anything else can fail.  Get the eject off
+        # the stack.
+        pop(@gCleanup);
+
+        # $hybridImage will be removed soon, but until then, it needs to
+        # stay on the cleanup stack.  It needs to wait until after
+        # ejection.  $udrwImage is staying around.  Make it appear as
+        # though it's been done before $hybridImage.
+        #
+        # splice in this form is the same as popping one element to
+        # @tempCleanup and pushing the subroutine.
+        my(@tempCleanup);
+        @tempCleanup = splice(@gCleanup, -1, 1,
+         sub {commandInternalVerbosity(0, 'unlink', $udrwImage);});
+        push(@gCleanup, @tempCleanup);
+
+        if(command($gConfig{'cmd_diskutil'}, 'eject', $rootDevice) != 0) {
+          cleanupDie('diskutil eject failed');
+        }
+
+        # Pop unlink of $uncompressedImage
+        pop(@gCleanup);
+
+        if(commandInternal('unlink', $hybridImage) != 1) {
+          cleanupDie('unlink hybridImage failed: '.$!);
+        }
+      }
+    }
+    else {
+      # makehybrid is not available, fall back to making a UDRW and
+      # converting to a compressed image.  It ought to be possible to
+      # create a compressed image directly, but those come out far too
+      # large (journaling?) and need to be read-write to fix up the
+      # volume icon anyway.  Luckily, we can take advantage of a single
+      # call back into this function.
+      my($udrwImage);
+      $udrwImage = giveExtension($tempDir.'/udrw', '.dmg');
+
+      diskImageMaker($source, $udrwImage, 'UDRW', $name, $tempDir,
+       $tempMount, $baseName, $setRootIcon);
+
+      # The call back into diskImageMaker already removed $source.
+
+      $uncompressedImage = $udrwImage;
+    }
+
+    # The uncompressed disk image is now in its final form.  Compress it.
+    # Jaguar doesn't support hdiutil convert -ov, but it always allows
+    # overwriting.
+    # bzip2-compressed UDBZ images can only be created and mounted on 10.4
+    # and later.  The bzip2-level imagekey is only effective when creating
+    # images in 10.5.  In 10.4, bzip2-level is harmlessly ignored, and the
+    # default value of 1 is always used.
+    if(command($gConfig{'cmd_hdiutil'}, 'convert', '-format', $format,
+     ($format eq 'UDZO' ? ('-imagekey', 'zlib-level=9') : ()),
+     ($format eq 'UDBZ' ? ('-imagekey', 'bzip2-level=9') : ()),
+     (defined($gDarwinMajor) && $gDarwinMajor <= 6 ? () : ('-ov')),
+     $uncompressedImage, '-o', $destination) != 0) {
+      cleanupDie('hdiutil convert failed');
+    }
+
+    # $uncompressedImage is going to be unlinked before anything else can
+    # fail.  splice in this form is the same as pop/push.
+    splice(@gCleanup, -1, 1,
+     sub {commandInternalVerbosity(0, 'unlink', $destination);});
+
+    if(commandInternal('unlink', $uncompressedImage) != 1) {
+      cleanupDie('unlink uncompressedImage failed: '.$!);
+    }
+
+    # At this point, the only thing that the compressed block has added to
+    # the cleanup stack is the removal of $destination.  $source has already
+    # been removed, and its cleanup entry has been removed as well.
+  }
+  elsif($format eq 'UDRW' || $format eq 'UDSP') {
+    my(@extraArguments);
+    if(!$gConfig{'partition_table'}) {
+      @extraArguments = ('-layout', 'NONE');
+    }
+
+    if($gConfig{'create_directly'}) {
+      # Use -fs HFS+ to suppress the journal.
+      if(command($gConfig{'cmd_hdiutil'}, 'create', '-format', $format,
+       @extraArguments, '-fs', 'HFS+', '-volname', $name,
+       '-ov', '-srcfolder', $source, $destination) != 0) {
+        cleanupDie('hdiutil create failed');
+      }
+
+      # $source is no longer needed and will be removed before anything
+      # else can fail.  splice in this form is the same as pop/push.
+      splice(@gCleanup, -1, 1,
+       sub {commandInternalVerbosity(0, 'unlink', $destination);});
+
+      if(command($gConfig{'cmd_rm'}, '-rf', $source) != 0) {
+        cleanupDie('rm -rf failed');
+      }
+    }
+    else {
+      # hdiutil create does not support -srcfolder or -srcdevice, it only
+      # knows how to create blank images.  Figure out how large an image
+      # is needed, create it, and fill it.  This is needed for Jaguar.
+
+      # Use native block size for hdiutil create -sectors.
+      delete $ENV{'BLOCKSIZE'};
+
+      my(@duOutput, $ignore, $sizeBlocks, $sizeOverhead, $sizeTotal, $type);
+      if(!(@output = commandOutput($gConfig{'cmd_du'}, '-s', $tempRoot)) ||
+       $? != 0) {
+        cleanupDie('du failed');
+      }
+      ($sizeBlocks, $ignore) = split(' ', $output[0], 2);
+
+      # The filesystem itself takes up 152 blocks of its own blocks for the
+      # filesystem up to 8192 blocks, plus 64 blocks for every additional
+      # 4096 blocks or portion thereof.
+      $sizeOverhead = 152 + 64 * POSIX::ceil(
+       (($sizeBlocks - 8192) > 0) ? (($sizeBlocks - 8192) / (4096 - 64)) : 0);
+
+      # The number of blocks must be divisible by 8.
+      my($mod);
+      if($mod = ($sizeOverhead % 8)) {
+        $sizeOverhead += 8 - $mod;
+      }
+
+      # sectors is taken as the size of a disk, not a filesystem, so the
+      # partition table eats into it.
+      if($gConfig{'partition_table'}) {
+        $sizeOverhead += 80;
+      }
+
+      # That was hard.  Leave some breathing room anyway.  Use 1024 sectors
+      # (512kB).  These read-write images wouldn't be useful if they didn't
+      # have at least a little free space.
+      $sizeTotal = $sizeBlocks + $sizeOverhead + 1024;
+
+      # Minimum sizes - these numbers are larger on Jaguar than on later
+      # systems.  Just use the Jaguar numbers, since it's unlikely to wind
+      # up here on any other release.
+      if($gConfig{'partition_table'} && $sizeTotal < 8272) {
+        $sizeTotal = 8272;
+      }
+      if(!$gConfig{'partition_table'} && $sizeTotal < 8192) {
+        $sizeTotal = 8192;
+      }
+
+      # hdiutil create without -srcfolder or -srcdevice will not accept
+      # -format.  It uses -type.  Fortunately, the two supported formats
+      # here map directly to the only two supported types.
+      if ($format eq 'UDSP') {
+        $type = 'SPARSE';
+      }
+      else {
+        $type = 'UDIF';
+      }
+
+      if(command($gConfig{'cmd_hdiutil'}, 'create', '-type', $type,
+       @extraArguments, '-fs', 'HFS+', '-volname', $name,
+       '-ov', '-sectors', $sizeTotal, $destination) != 0) {
+        cleanupDie('hdiutil create failed');
+      }
+
+      push(@gCleanup,
+       sub {commandInternalVerbosity(0, 'unlink', $destination);});
+
+      # The rsync will occur shortly.
+    }
+
+    my($mounted, $rootDevice, $partitionDevice, $partitionMountPoint);
+
+    $mounted=0;
+    if(!$gConfig{'create_directly'} || $gConfig{'openfolder_bless'} ||
+     $setRootIcon) {
+      # The disk image only needs to be mounted if:
+      #  create_directly is false, because the content needs to be copied
+      #  openfolder_bless is true, because bless -openfolder needs to run
+      #  setRootIcon is true, because the root needs its attributes set.
+      if(!(($rootDevice, $partitionDevice, $partitionMountPoint) =
+       hdidMountImage($tempMount, $destination))) {
+        cleanupDie('hdid mount failed');
+      }
+
+      $mounted=1;
+
+      push(@gCleanup, sub {commandVerbosity(0,
+       $gConfig{'cmd_diskutil'}, 'eject', $rootDevice);});
+    }
+
+    if(!$gConfig{'create_directly'}) {
+      # Couldn't create and copy directly in one fell swoop.  Now that
+      # the volume is mounted, copy the files.  --copy-unsafe-links is
+      # unnecessary since it was used to copy everything to the staging
+      # area.  There can be no more unsafe links.
+      if(command($gConfig{'cmd_rsync'}, '-aC', '--include', '*.so',
+       $source.'/',$partitionMountPoint) != 0) {
+        cleanupDie('rsync to new volume failed');
+      }
+
+      # We need to get the rm -rf of $source off the stack, because it's
+      # being cleaned up here.  There are two items now on top of it:
+      # removing the target image and, above that, ejecting it.  Splice it
+      # out.
+      my(@tempCleanup);
+      @tempCleanup = splice(@gCleanup, -2);
+      # The next splice is the same as popping once and pushing @tempCleanup.
+      splice(@gCleanup, -1, 1, @tempCleanup);
+
+      if(command($gConfig{'cmd_rm'}, '-rf', $source) != 0) {
+        cleanupDie('rm -rf failed');
+      }
+    }
+
+    if($gConfig{'openfolder_bless'}) {
+      # On Tiger, the bless docs say to use --openfolder, but only
+      # --openfolder is accepted on Panther.  Tiger takes it with a single
+      # dash too.  Jaguar is out of luck.
+      if(command($gConfig{'cmd_bless'}, '-openfolder',
+       $partitionMountPoint) != 0) {
+        cleanupDie('bless failed');
+      }
+    }
+
+    setAttributes($partitionMountPoint, @attributes);
+
+    if($setRootIcon) {
+      # When "hdiutil create -srcfolder" is used, the root folder's
+      # attributes are not copied to the new volume.  Fix up.
+
+      if(command($gConfig{'cmd_SetFile'}, '-a', 'C',
+       $partitionMountPoint) != 0) {
+        cleanupDie('SetFile failed');
+      }
+    }
+
+    if($mounted) {
+      # Pop diskutil eject
+      pop(@gCleanup);
+
+      if(command($gConfig{'cmd_diskutil'}, 'eject', $rootDevice) != 0) {
+        cleanupDie('diskutil eject failed');
+      }
+    }
+
+    # End of UDRW/UDSP section.  At this point, $source has been removed
+    # and its cleanup entry has been removed from the stack.
+  }
+  else {
+    cleanupDie('unrecognized format');
+    print STDERR ($0.": unrecognized format\n");
+    exit(1);
+  }
+}
+
+# giveExtension($file, $extension)
+#
+# If $file does not end in $extension, $extension is added.  The new
+# filename is returned.
+sub giveExtension($$) {
+  my($extension, $file);
+  ($file, $extension) = @_;
+  if(substr($file, -length($extension)) ne $extension) {
+    return $file.$extension;
+  }
+  return $file;
+}
+
+# hdidMountImage($mountPoint, @arguments)
+#
+# Runs the hdid command with arguments specified by @arguments.
+# @arguments may be a single-element array containing the name of the
+# disk image to mount.  Returns a three-element array, with elements
+# corresponding to:
+#  - The root device of the mounted image, suitable for ejection
+#  - The device corresponding to the mounted partition
+#  - The mounted partition's mount point
+#
+# If running on a system that supports easy mounting at points outside
+# of the default /Volumes with hdiutil attach, it is used instead of hdid,
+# and $mountPoint is used as the mount point.
+#
+# The root device will differ from the partition device when the disk
+# image contains a partition table, otherwise, they will be identical.
+#
+# If hdid fails, undef is returned.
+sub hdidMountImage($@) {
+  my(@arguments, @command, $mountPoint);
+  ($mountPoint, @arguments) = @_;
+  my(@output);
+
+  if($gConfig{'hdiutil_mountpoint'}) {
+    @command=($gConfig{'cmd_hdiutil'}, 'attach', @arguments,
+     '-mountpoint', $mountPoint);
+  }
+  else {
+    @command=($gConfig{'cmd_hdid'}, @arguments);
+  }
+
+  if(!(@output = commandOutput(@command)) ||
+   $? != 0) {
+    return undef;
+  }
+
+  if($gDryRun) {
+    return('/dev/diskX','/dev/diskXsY','/Volumes/'.$volumeName);
+  }
+
+  my($line, $restOfLine, $rootDevice);
+
+  foreach $line (@output) {
+    my($device, $mountpoint);
+    if($line !~ /^\/dev\//) {
+      # Consider only lines that correspond to /dev entries
+      next;
+    }
+    ($device, $restOfLine) = split(' ', $line, 2);
+
+    if(!defined($rootDevice) || $rootDevice eq '') {
+      # If this is the first device seen, it's the root device to be
+      # used for ejection.  Keep it.
+      $rootDevice = $device;
+    }
+
+    if($restOfLine =~ /(\/.*)/) {
+      # The first partition with a mount point is the interesting one.  It's
+      # usually Apple_HFS and usually the last one in the list, but beware of
+      # the possibility of other filesystem types and the Apple_Free partition.
+      # If the disk image contains no partition table, the partition will not
+      # have a type, so look for the mount point by looking for a slash.
+      $mountpoint = $1;
+      return($rootDevice, $device, $mountpoint);
+    }
+  }
+
+  # No mount point?  This is bad.  If there's a root device, eject it.
+  if(defined($rootDevice) && $rootDevice ne '') {
+    # Failing anyway, so don't care about failure
+    commandVerbosity(0, $gConfig{'cmd_diskutil'}, 'eject', $rootDevice);
+  }
+
+  return undef;
+}
+
+# isFormatReadOnly($format)
+#
+# Returns true if $format corresponds to a read-only disk image format.
+# Returns false otherwise.
+sub isFormatReadOnly($) {
+  my($format);
+  ($format) = @_;
+  return $format eq 'UDZO' || $format eq 'UDBZ' || $format eq 'UDRO';
+}
+
+# licenseMaker($text, $resource)
+#
+# Takes a plain text file at path $text and creates a license agreement
+# resource containing the text at path $license.  English-only, and
+# no special formatting.  This is the bare-bones stuff.  For more
+# intricate license agreements, create your own resource.
+#
+# ftp://ftp.apple.com/developer/Development_Kits/SLAs_for_UDIFs_1.0.dmg
+sub licenseMaker($$) {
+  my($resource, $text);
+  ($text, $resource) = @_;
+  if(!sysopen(*TEXT, $text, O_RDONLY)) {
+    print STDERR ($0.': licenseMaker: sysopen text: '.$!."\n");
+    return 0;
+  }
+  if(!sysopen(*RESOURCE, $resource, O_WRONLY|O_CREAT|O_EXCL)) {
+    print STDERR ($0.': licenseMaker: sysopen resource: '.$!."\n");
+    return 0;
+  }
+  print RESOURCE << '__EOT__';
+// See /System/Library/Frameworks/CoreServices.framework/Frameworks/CarbonCore.framework/Headers/Script.h for language IDs.
+data 'LPic' (5000) {
+  // Default language ID, 0 = English
+  $"0000"
+  // Number of entries in list
+  $"0001"
+
+  // Entry 1
+  // Language ID, 0 = English
+  $"0000"
+  // Resource ID, 0 = STR#/TEXT/styl 5000
+  $"0000"
+  // Multibyte language, 0 = no
+  $"0000"
+};
+
+resource 'STR#' (5000, "English") {
+  {
+    // Language (unused?) = English
+    "English",
+    // Agree
+    "Agree",
+    // Disagree
+    "Disagree",
+__EOT__
+    # This stuff needs double-quotes for interpolations to work.
+    print RESOURCE ("    // Print, ellipsis is 0xC9\n");
+    print RESOURCE ("    \"Print\xc9\",\n");
+    print RESOURCE ("    // Save As, ellipsis is 0xC9\n");
+    print RESOURCE ("    \"Save As\xc9\",\n");
+    print RESOURCE ('    // Descriptive text, curly quotes are 0xD2 and 0xD3'.
+     "\n");
+    print RESOURCE ('    "If you agree to the terms of this license '.
+     "agreement, click \xd2Agree\xd3 to access the software.  If you ".
+     "do not agree, press \xd2Disagree.\xd3\"\n");
+print RESOURCE << '__EOT__';
+  };
+};
+
+// Beware of 1024(?) byte (character?) line length limitation.  Split up long
+// lines.
+// If straight quotes are used ("), remember to escape them (\").
+// Newline is \n, to leave a blank line, use two of them.
+// 0xD2 and 0xD3 are curly double-quotes ("), 0xD4 and 0xD5 are curly
+//   single quotes ('), 0xD5 is also the apostrophe.
+data 'TEXT' (5000, "English") {
+__EOT__
+
+  while(!eof(*TEXT)) {
+    my($line);
+    chop($line = <TEXT>);
+
+    while(defined($line)) {
+      my($chunk);
+
+      # Rez doesn't care for lines longer than (1024?) characters.  Split
+      # at less than half of that limit, in case everything needs to be
+      # backwhacked.
+      if(length($line)>500) {
+        $chunk = substr($line, 0, 500);
+        $line = substr($line, 500);
+      }
+      else {
+        $chunk = $line;
+        $line = undef;
+      }
+
+      if(length($chunk) > 0) {
+        # Unsafe characters are the double-quote (") and backslash (\), escape
+        # them with backslashes.
+        $chunk =~ s/(["\\])/\\$1/g;
+
+        print RESOURCE '  "'.$chunk.'"'."\n";
+      }
+    }
+    print RESOURCE '  "\n"'."\n";
+  }
+  close(*TEXT);
+
+  print RESOURCE << '__EOT__';
+};
+
+data 'styl' (5000, "English") {
+  // Number of styles following = 1
+  $"0001"
+
+  // Style 1.  This is used to display the first two lines in bold text.
+  // Start character = 0
+  $"0000 0000"
+  // Height = 16
+  $"0010"
+  // Ascent = 12
+  $"000C"
+  // Font family = 1024 (Lucida Grande)
+  $"0400"
+  // Style bitfield, 0x1=bold 0x2=italic 0x4=underline 0x8=outline
+  // 0x10=shadow 0x20=condensed 0x40=extended
+  $"00"
+  // Style, unused?
+  $"02"
+  // Size = 12 point
+  $"000C"
+  // Color, RGB
+  $"0000 0000 0000"
+};
+__EOT__
+  close(*RESOURCE);
+
+  return 1;
+}
+
+# pathSplit($pathname)
+#
+# Splits $pathname into an array of path components.
+sub pathSplit($) {
+  my($pathname);
+  ($pathname) = @_;
+  return split(/\//, $pathname);
+}
+
+# setAttributes($root, @attributeList)
+#
+# @attributeList is an array, each element of which must be in the form
+# <a>:<file>.  <a> is a list of attributes, per SetFile.  <file> is a file
+# which is taken as relative to $root (even if it appears as an absolute
+# path.)  SetFile is called to set the attributes on each file in
+# @attributeList.
+sub setAttributes($@) {
+  my(@attributes, $root);
+  ($root, @attributes) = @_;
+  my($attribute);
+  foreach $attribute (@attributes) {
+    my($attrList, $file, @fileList, @fixedFileList);
+    ($attrList, @fileList) = split(/:/, $attribute);
+    if(!defined($attrList) || !@fileList) {
+      cleanupDie('--attribute requires <attributes>:<file>');
+    }
+    @fixedFileList=();
+    foreach $file (@fileList) {
+      if($file =~ /^\//) {
+        push(@fixedFileList, $root.$file);
+      }
+      else {
+        push(@fixedFileList, $root.'/'.$file);
+      }
+    }
+    if(command($gConfig{'cmd_SetFile'}, '-a', $attrList, @fixedFileList)) {
+      cleanupDie('SetFile failed to set attributes');
+    }
+  }
+  return;
+}
+
+sub trapSignal($) {
+  my($signalName);
+  ($signalName) = @_;
+  cleanupDie('exiting on SIG'.$signalName);
+}
+
+sub usage() {
+  print STDERR (
+"usage: pkg-dmg --source <source-folder>\n".
+"               --target <target-image>\n".
+"              [--format <format>]           (default: UDZO)\n".
+"              [--volname <volume-name>]     (default: same name as source)\n".
+"              [--tempdir <temp-dir>]        (default: same dir as target)\n".
+"              [--mkdir <directory>]         (make directory in image)\n".
+"              [--copy <source>[:<dest>]]    (extra files to add)\n".
+"              [--symlink <source>[:<dest>]] (extra symlinks to add)\n".
+"              [--license <file>]            (plain text license agreement)\n".
+"              [--resource <file>]           (flat .r files to merge)\n".
+"              [--icon <icns-file>]          (volume icon)\n".
+"              [--attribute <a>:<file>]      (set file attributes)\n".
+"              [--idme]                      (make Internet-enabled image)\n".
+"              [--sourcefile]                (treat --source as a file)\n".
+"              [--verbosity <level>]         (0, 1, 2; default=2)\n".
+"              [--dry-run]                   (print what would be done)\n");
+  return;
+}