third_party/freetype/include_overrides/freetype/config/ftoption.h - Issue 833103004: Update Android FreeType version.

Unified Diff: third_party/freetype/include_overrides/freetype/config/ftoption.h

Issue 833103004: Update Android FreeType version. (Closed) Base URL: https://skia.googlesource.com/skia.git@master

Patch Set: Update Created 5 years, 2 months ago

Use n/p to move between diff chunks; N/P to move between comments. Draft comments are only viewable by you.

Jump to:

View side-by-side diff with in-line comments

Index: third_party/freetype/include_overrides/freetype/config/ftoption.h

diff --git a/third_party/freetype/include_overrides/freetype/config/ftoption.h b/third_party/freetype/include_overrides/freetype/config/ftoption.h

deleted file mode 100644

index 0894625216040bbb257b0cd465e4b13fb5c4d7a1..0000000000000000000000000000000000000000

--- a/third_party/freetype/include_overrides/freetype/config/ftoption.h

+++ /dev/null

@@ -1,833 +0,0 @@

-/***************************************************************************/

-/* */

-/* ftoption.h */

-/* */

-/* User-selectable configuration macros (specification only). */

-/* */

-/* David Turner, Robert Wilhelm, and Werner Lemberg. */

-/* */

-/* This file is part of the FreeType project, and may only be used, */

-/* modified, and distributed under the terms of the FreeType project */

-/* license, LICENSE.TXT. By continuing to use, modify, or distribute */

-/* this file you indicate that you have read the license and */

-/* understand and accept it fully. */

-/* */

-/***************************************************************************/

-#ifndef __FTOPTION_H__

-#define __FTOPTION_H__

-#include <ft2build.h>

-FT_BEGIN_HEADER

- /*************************************************************************/

- /* */

- /* USER-SELECTABLE CONFIGURATION MACROS */

- /* */

- /* This file contains the default configuration macro definitions for */

- /* a standard build of the FreeType library. There are three ways to */

- /* use this file to build project-specific versions of the library: */

- /* */

- /* - You can modify this file by hand, but this is not recommended in */

- /* cases where you would like to build several versions of the */

- /* library from a single source directory. */

- /* */

- /* - You can put a copy of this file in your build directory, more */

- /* precisely in `$BUILD/freetype/config/ftoption.h', where `$BUILD' */

- /* is the name of a directory that is included _before_ the FreeType */

- /* include path during compilation. */

- /* */

- /* The default FreeType Makefiles and Jamfiles use the build */

- /* directory `builds/<system>' by default, but you can easily change */

- /* that for your own projects. */

- /* */

- /* - Copy the file <ft2build.h> to `$BUILD/ft2build.h' and modify it */

- /* slightly to pre-define the macro FT_CONFIG_OPTIONS_H used to */

- /* locate this file during the build. For example, */

- /* */

- /* #define FT_CONFIG_OPTIONS_H <myftoptions.h> */

- /* #include <freetype/config/ftheader.h> */

- /* */

- /* will use `$BUILD/myftoptions.h' instead of this file for macro */

- /* definitions. */

- /* */

- /* Note also that you can similarly pre-define the macro */

- /* FT_CONFIG_MODULES_H used to locate the file listing of the modules */

- /* that are statically linked to the library at compile time. By */

- /* default, this file is <freetype/config/ftmodule.h>. */

- /* */

- /* We highly recommend using the third method whenever possible. */

- /* */

- /*************************************************************************/

- /**** ****/

- /**** G E N E R A L F R E E T Y P E 2 C O N F I G U R A T I O N ****/

- /**** ****/

- /*************************************************************************/

- /* */

- /* Uncomment the line below if you want to activate sub-pixel rendering */

- /* (a.k.a. LCD rendering, or ClearType) in this build of the library. */

- /* */

- /* Note that this feature is covered by several Microsoft patents */

- /* and should not be activated in any default build of the library. */

- /* */

- /* This macro has no impact on the FreeType API, only on its */

- /* _implementation_. For example, using FT_RENDER_MODE_LCD when calling */

- /* FT_Render_Glyph still generates a bitmap that is 3 times wider than */

- /* the original size in case this macro isn't defined; however, each */

- /* triplet of subpixels has R=G=B. */

- /* */

- /* This is done to allow FreeType clients to run unmodified, forcing */

- /* them to display normal gray-level anti-aliased glyphs. */

- /* */

-/* #define FT_CONFIG_OPTION_SUBPIXEL_RENDERING */

- /*************************************************************************/

- /* */

- /* Many compilers provide a non-ANSI 64-bit data type that can be used */

- /* by FreeType to speed up some computations. However, this will create */

- /* some problems when compiling the library in strict ANSI mode. */

- /* */

- /* For this reason, the use of 64-bit integers is normally disabled when */

- /* the __STDC__ macro is defined. You can however disable this by */

- /* defining the macro FT_CONFIG_OPTION_FORCE_INT64 here. */

- /* */

- /* For most compilers, this will only create compilation warnings when */

- /* building the library. */

- /* */

- /* ObNote: The compiler-specific 64-bit integers are detected in the */

- /* file `ftconfig.h' either statically or through the */

- /* `configure' script on supported platforms. */

- /* */

-#undef FT_CONFIG_OPTION_FORCE_INT64

- /*************************************************************************/

- /* */

- /* If this macro is defined, do not try to use an assembler version of */

- /* performance-critical functions (e.g. FT_MulFix). You should only do */

- /* that to verify that the assembler function works properly, or to */

- /* execute benchmark tests of the various implementations. */

-/* #define FT_CONFIG_OPTION_NO_ASSEMBLER */

- /*************************************************************************/

- /* */

- /* If this macro is defined, try to use an inlined assembler version of */

- /* the `FT_MulFix' function, which is a `hotspot' when loading and */

- /* hinting glyphs, and which should be executed as fast as possible. */

- /* */

- /* Note that if your compiler or CPU is not supported, this will default */

- /* to the standard and portable implementation found in `ftcalc.c'. */

- /* */

-#define FT_CONFIG_OPTION_INLINE_MULFIX

- /*************************************************************************/

- /* */

- /* LZW-compressed file support. */

- /* */

- /* FreeType now handles font files that have been compressed with the */

- /* `compress' program. This is mostly used to parse many of the PCF */

- /* files that come with various X11 distributions. The implementation */

- /* uses NetBSD's `zopen' to partially uncompress the file on the fly */

- /* (see src/lzw/ftgzip.c). */

- /* */

- /* Define this macro if you want to enable this `feature'. */

- /* */

-#define FT_CONFIG_OPTION_USE_LZW

- /*************************************************************************/

- /* */

- /* Gzip-compressed file support. */

- /* */

- /* FreeType now handles font files that have been compressed with the */

- /* `gzip' program. This is mostly used to parse many of the PCF files */

- /* that come with XFree86. The implementation uses `zlib' to */

- /* partially uncompress the file on the fly (see src/gzip/ftgzip.c). */

- /* */

- /* Define this macro if you want to enable this `feature'. See also */

- /* the macro FT_CONFIG_OPTION_SYSTEM_ZLIB below. */

- /* */

-#define FT_CONFIG_OPTION_USE_ZLIB

- /*************************************************************************/

- /* */

- /* ZLib library selection */

- /* */

- /* This macro is only used when FT_CONFIG_OPTION_USE_ZLIB is defined. */

- /* It allows FreeType's `ftgzip' component to link to the system's */

- /* installation of the ZLib library. This is useful on systems like */

- /* Unix or VMS where it generally is already available. */

- /* */

- /* If you let it undefined, the component will use its own copy */

- /* of the zlib sources instead. These have been modified to be */

- /* included directly within the component and *not* export external */

- /* function names. This allows you to link any program with FreeType */

- /* _and_ ZLib without linking conflicts. */

- /* */

- /* Do not #undef this macro here since the build system might define */

- /* it for certain configurations only. */

- /* */

-/* #define FT_CONFIG_OPTION_SYSTEM_ZLIB */

- /*************************************************************************/

- /* */

- /* Bzip2-compressed file support. */

- /* */

- /* FreeType now handles font files that have been compressed with the */

- /* `bzip2' program. This is mostly used to parse many of the PCF */

- /* files that come with XFree86. The implementation uses `libbz2' to */

- /* partially uncompress the file on the fly (see src/bzip2/ftbzip2.c). */

- /* Contrary to gzip, bzip2 currently is not included and need to use */

- /* the system available bzip2 implementation. */

- /* */

- /* Define this macro if you want to enable this `feature'. */

- /* */

-/* #define FT_CONFIG_OPTION_USE_BZIP2 */

- /*************************************************************************/

- /* */

- /* Define to disable the use of file stream functions and types, FILE, */

- /* fopen() etc. Enables the use of smaller system libraries on embedded */

- /* systems that have multiple system libraries, some with or without */

- /* file stream support, in the cases where file stream support is not */

- /* necessary such as memory loading of font files. */

- /* */

-/* #define FT_CONFIG_OPTION_DISABLE_STREAM_SUPPORT */

- /*************************************************************************/

- /* */

- /* PNG bitmap support. */

- /* */

- /* FreeType now handles loading color bitmap glyphs in the PNG format. */

- /* This requires help from the external libpng library. Uncompressed */

- /* color bitmaps do not need any external libraries and will be */

- /* supported regardless of this configuration. */

- /* */

- /* Define this macro if you want to enable this `feature'. */

- /* */

-#define FT_CONFIG_OPTION_USE_PNG

- /*************************************************************************/

- /* */

- /* DLL export compilation */

- /* */

- /* When compiling FreeType as a DLL, some systems/compilers need a */

- /* special keyword in front OR after the return type of function */

- /* declarations. */

- /* */

- /* Two macros are used within the FreeType source code to define */

- /* exported library functions: FT_EXPORT and FT_EXPORT_DEF. */

- /* */

- /* FT_EXPORT( return_type ) */

- /* */

- /* is used in a function declaration, as in */

- /* */

- /* FT_EXPORT( FT_Error ) */

- /* FT_Init_FreeType( FT_Library* alibrary ); */

- /* */

- /* FT_EXPORT_DEF( return_type ) */

- /* */

- /* is used in a function definition, as in */

- /* */

- /* FT_EXPORT_DEF( FT_Error ) */

- /* FT_Init_FreeType( FT_Library* alibrary ) */

- /* { */

- /* ... some code ... */

- /* return FT_Err_Ok; */

- /* } */

- /* */

- /* You can provide your own implementation of FT_EXPORT and */

- /* FT_EXPORT_DEF here if you want. If you leave them undefined, they */

- /* will be later automatically defined as `extern return_type' to */

- /* allow normal compilation. */

- /* */

- /* Do not #undef these macros here since the build system might define */

- /* them for certain configurations only. */

- /* */

-/* #define FT_EXPORT(x) extern x */

-/* #define FT_EXPORT_DEF(x) x */

- /*************************************************************************/

- /* */

- /* Glyph Postscript Names handling */

- /* */

- /* By default, FreeType 2 is compiled with the `psnames' module. This */

- /* module is in charge of converting a glyph name string into a */

- /* Unicode value, or return a Macintosh standard glyph name for the */

- /* use with the TrueType `post' table. */

- /* */

- /* Undefine this macro if you do not want `psnames' compiled in your */

- /* build of FreeType. This has the following effects: */

- /* */

- /* - The TrueType driver will provide its own set of glyph names, */

- /* if you build it to support postscript names in the TrueType */

- /* `post' table. */

- /* */

- /* - The Type 1 driver will not be able to synthesize a Unicode */

- /* charmap out of the glyphs found in the fonts. */

- /* */

- /* You would normally undefine this configuration macro when building */

- /* a version of FreeType that doesn't contain a Type 1 or CFF driver. */

- /* */

-#define FT_CONFIG_OPTION_POSTSCRIPT_NAMES

- /*************************************************************************/

- /* */

- /* Postscript Names to Unicode Values support */

- /* */

- /* By default, FreeType 2 is built with the `PSNames' module compiled */

- /* in. Among other things, the module is used to convert a glyph name */

- /* into a Unicode value. This is especially useful in order to */

- /* synthesize on the fly a Unicode charmap from the CFF/Type 1 driver */

- /* through a big table named the `Adobe Glyph List' (AGL). */

- /* */

- /* Undefine this macro if you do not want the Adobe Glyph List */

- /* compiled in your `PSNames' module. The Type 1 driver will not be */

- /* able to synthesize a Unicode charmap out of the glyphs found in the */

- /* fonts. */

- /* */

-#define FT_CONFIG_OPTION_ADOBE_GLYPH_LIST

- /*************************************************************************/

- /* */

- /* Support for Mac fonts */

- /* */

- /* Define this macro if you want support for outline fonts in Mac */

- /* format (mac dfont, mac resource, macbinary containing a mac */

- /* resource) on non-Mac platforms. */

- /* */

- /* Note that the `FOND' resource isn't checked. */

- /* */

-#define FT_CONFIG_OPTION_MAC_FONTS

- /*************************************************************************/

- /* */

- /* Guessing methods to access embedded resource forks */

- /* */

- /* Enable extra Mac fonts support on non-Mac platforms (e.g. */

- /* GNU/Linux). */

- /* */

- /* Resource forks which include fonts data are stored sometimes in */

- /* locations which users or developers don't expected. In some cases, */

- /* resource forks start with some offset from the head of a file. In */

- /* other cases, the actual resource fork is stored in file different */

- /* from what the user specifies. If this option is activated, */

- /* FreeType tries to guess whether such offsets or different file */

- /* names must be used. */

- /* */

- /* Note that normal, direct access of resource forks is controlled via */

- /* the FT_CONFIG_OPTION_MAC_FONTS option. */

- /* */

-#ifdef FT_CONFIG_OPTION_MAC_FONTS

-#define FT_CONFIG_OPTION_GUESSING_EMBEDDED_RFORK

-#endif

- /*************************************************************************/

- /* */

- /* Allow the use of FT_Incremental_Interface to load typefaces that */

- /* contain no glyph data, but supply it via a callback function. */

- /* This is required by clients supporting document formats which */

- /* supply font data incrementally as the document is parsed, such */

- /* as the Ghostscript interpreter for the PostScript language. */

- /* */

-#define FT_CONFIG_OPTION_INCREMENTAL

- /*************************************************************************/

- /* */

- /* The size in bytes of the render pool used by the scan-line converter */

- /* to do all of its work. */

- /* */

- /* This must be greater than 4KByte if you use FreeType to rasterize */

- /* glyphs; otherwise, you may set it to zero to avoid unnecessary */

- /* allocation of the render pool. */

- /* */

-#define FT_RENDER_POOL_SIZE 16384L

- /*************************************************************************/

- /* */

- /* FT_MAX_MODULES */

- /* */

- /* The maximum number of modules that can be registered in a single */

- /* FreeType library object. 32 is the default. */

- /* */

-#define FT_MAX_MODULES 32

- /*************************************************************************/

- /* */

- /* Debug level */

- /* */

- /* FreeType can be compiled in debug or trace mode. In debug mode, */

- /* errors are reported through the `ftdebug' component. In trace */

- /* mode, additional messages are sent to the standard output during */

- /* execution. */

- /* */

- /* Define FT_DEBUG_LEVEL_ERROR to build the library in debug mode. */

- /* Define FT_DEBUG_LEVEL_TRACE to build it in trace mode. */

- /* */

- /* Don't define any of these macros to compile in `release' mode! */

- /* */

- /* Do not #undef these macros here since the build system might define */

- /* them for certain configurations only. */

- /* */

-/* #define FT_DEBUG_LEVEL_ERROR */

-/* #define FT_DEBUG_LEVEL_TRACE */

- /*************************************************************************/

- /* */

- /* Autofitter debugging */

- /* */

- /* If FT_DEBUG_AUTOFIT is defined, FreeType provides some means to */

- /* control the autofitter behaviour for debugging purposes with global */

- /* boolean variables (consequently, you should *never* enable this */

- /* while compiling in `release' mode): */

- /* */

- /* _af_debug_disable_horz_hints */

- /* _af_debug_disable_vert_hints */

- /* _af_debug_disable_blue_hints */

- /* */

- /* Additionally, the following functions provide dumps of various */

- /* internal autofit structures to stdout (using `printf'): */

- /* */

- /* af_glyph_hints_dump_points */

- /* af_glyph_hints_dump_segments */

- /* af_glyph_hints_dump_edges */

- /* */

- /* As an argument, they use another global variable: */

- /* */

- /* _af_debug_hints */

- /* */

- /* Please have a look at the `ftgrid' demo program to see how those */

- /* variables and macros should be used. */

- /* */

- /* Do not #undef these macros here since the build system might define */

- /* them for certain configurations only. */

- /* */

-/* #define FT_DEBUG_AUTOFIT */

- /*************************************************************************/

- /* */

- /* Memory Debugging */

- /* */

- /* FreeType now comes with an integrated memory debugger that is */

- /* capable of detecting simple errors like memory leaks or double */

- /* deletes. To compile it within your build of the library, you */

- /* should define FT_DEBUG_MEMORY here. */

- /* */

- /* Note that the memory debugger is only activated at runtime when */

- /* when the _environment_ variable `FT2_DEBUG_MEMORY' is defined also! */

- /* */

- /* Do not #undef this macro here since the build system might define */

- /* it for certain configurations only. */

- /* */

-/* #define FT_DEBUG_MEMORY */

- /*************************************************************************/

- /* */

- /* Module errors */

- /* */

- /* If this macro is set (which is _not_ the default), the higher byte */

- /* of an error code gives the module in which the error has occurred, */

- /* while the lower byte is the real error code. */

- /* */

- /* Setting this macro makes sense for debugging purposes only, since */

- /* it would break source compatibility of certain programs that use */

- /* FreeType 2. */

- /* */

- /* More details can be found in the files ftmoderr.h and fterrors.h. */

- /* */

-#undef FT_CONFIG_OPTION_USE_MODULE_ERRORS

- /*************************************************************************/

- /* */

- /* Position Independent Code */

- /* */

- /* If this macro is set (which is _not_ the default), FreeType2 will */

- /* avoid creating constants that require address fixups. Instead the */

- /* constants will be moved into a struct and additional intialization */

- /* code will be used. */

- /* */

- /* Setting this macro is needed for systems that prohibit address */

- /* fixups, such as BREW. */

- /* */

-/* #define FT_CONFIG_OPTION_PIC */

- /*************************************************************************/

- /**** ****/

- /**** S F N T D R I V E R C O N F I G U R A T I O N ****/

- /**** ****/

- /*************************************************************************/

- /* */

- /* Define TT_CONFIG_OPTION_EMBEDDED_BITMAPS if you want to support */

- /* embedded bitmaps in all formats using the SFNT module (namely */

- /* TrueType & OpenType). */

- /* */

-#define TT_CONFIG_OPTION_EMBEDDED_BITMAPS

- /*************************************************************************/

- /* */

- /* Define TT_CONFIG_OPTION_POSTSCRIPT_NAMES if you want to be able to */

- /* load and enumerate the glyph Postscript names in a TrueType or */

- /* OpenType file. */

- /* */

- /* Note that when you do not compile the `PSNames' module by undefining */

- /* the above FT_CONFIG_OPTION_POSTSCRIPT_NAMES, the `sfnt' module will */

- /* contain additional code used to read the PS Names table from a font. */

- /* */

- /* (By default, the module uses `PSNames' to extract glyph names.) */

- /* */

-#define TT_CONFIG_OPTION_POSTSCRIPT_NAMES

- /*************************************************************************/

- /* */

- /* Define TT_CONFIG_OPTION_SFNT_NAMES if your applications need to */

- /* access the internal name table in a SFNT-based format like TrueType */

- /* or OpenType. The name table contains various strings used to */

- /* describe the font, like family name, copyright, version, etc. It */

- /* does not contain any glyph name though. */

- /* */

- /* Accessing SFNT names is done through the functions declared in */

- /* `freetype/ftsnames.h'. */

- /* */

-#define TT_CONFIG_OPTION_SFNT_NAMES

- /*************************************************************************/

- /* */

- /* TrueType CMap support */

- /* */

- /* Here you can fine-tune which TrueType CMap table format shall be */

- /* supported. */

-#define TT_CONFIG_CMAP_FORMAT_0

-#define TT_CONFIG_CMAP_FORMAT_2

-#define TT_CONFIG_CMAP_FORMAT_4

-#define TT_CONFIG_CMAP_FORMAT_6

-#define TT_CONFIG_CMAP_FORMAT_8

-#define TT_CONFIG_CMAP_FORMAT_10

-#define TT_CONFIG_CMAP_FORMAT_12

-#define TT_CONFIG_CMAP_FORMAT_13

-#define TT_CONFIG_CMAP_FORMAT_14

- /*************************************************************************/

- /**** ****/

- /**** T R U E T Y P E D R I V E R C O N F I G U R A T I O N ****/

- /**** ****/

- /*************************************************************************/

- /* */

- /* Define TT_CONFIG_OPTION_BYTECODE_INTERPRETER if you want to compile */

- /* a bytecode interpreter in the TrueType driver. */

- /* */

- /* By undefining this, you will only compile the code necessary to load */

- /* TrueType glyphs without hinting. */

- /* */

- /* Do not #undef this macro here, since the build system might */

- /* define it for certain configurations only. */

- /* */

-#define TT_CONFIG_OPTION_BYTECODE_INTERPRETER

- /*************************************************************************/

- /* */

- /* Define TT_CONFIG_OPTION_SUBPIXEL_HINTING if you want to compile */

- /* EXPERIMENTAL subpixel hinting support into the TrueType driver. This */

- /* replaces the native TrueType hinting mechanism when anything but */

- /* FT_RENDER_MODE_MONO is requested. */

- /* */

- /* Enabling this causes the TrueType driver to ignore instructions under */

- /* certain conditions. This is done in accordance with the guide here, */

- /* with some minor differences: */

- /* */

- /* http://www.microsoft.com/typography/cleartype/truetypecleartype.aspx */

- /* */

- /* By undefining this, you only compile the code necessary to hint */

- /* TrueType glyphs with native TT hinting. */

- /* */

- /* This option requires TT_CONFIG_OPTION_BYTECODE_INTERPRETER to be */

- /* defined. */

- /* */

-/* #define TT_CONFIG_OPTION_SUBPIXEL_HINTING */

- /*************************************************************************/

- /* */

- /* If you define TT_CONFIG_OPTION_UNPATENTED_HINTING, a special version */

- /* of the TrueType bytecode interpreter is used that doesn't implement */

- /* any of the patented opcodes and algorithms. The patents related to */

- /* TrueType hinting have expired worldwide since May 2010; this option */

- /* is now deprecated. */

- /* */

- /* Note that the TT_CONFIG_OPTION_UNPATENTED_HINTING macro is *ignored* */

- /* if you define TT_CONFIG_OPTION_BYTECODE_INTERPRETER; in other words, */

- /* either define TT_CONFIG_OPTION_BYTECODE_INTERPRETER or */

- /* TT_CONFIG_OPTION_UNPATENTED_HINTING but not both at the same time. */

- /* */

- /* This macro is only useful for a small number of font files (mostly */

- /* for Asian scripts) that require bytecode interpretation to properly */

- /* load glyphs. For all other fonts, this produces unpleasant results, */

- /* thus the unpatented interpreter is never used to load glyphs from */

- /* TrueType fonts unless one of the following two options is used. */

- /* */

- /* - The unpatented interpreter is explicitly activated by the user */

- /* through the FT_PARAM_TAG_UNPATENTED_HINTING parameter tag */

- /* when opening the FT_Face. */

- /* */

- /* - FreeType detects that the FT_Face corresponds to one of the */

- /* `trick' fonts (e.g., `Mingliu') it knows about. The font engine */

- /* contains a hard-coded list of font names and other matching */

- /* parameters (see function `tt_face_init' in file */

- /* `src/truetype/ttobjs.c'). */

- /* */

- /* Here a sample code snippet for using FT_PARAM_TAG_UNPATENTED_HINTING. */

- /* */

- /* { */

- /* FT_Parameter parameter; */

- /* FT_Open_Args open_args; */

- /* */

- /* parameter.tag = FT_PARAM_TAG_UNPATENTED_HINTING; */

- /* */

- /* open_args.flags = FT_OPEN_PATHNAME | FT_OPEN_PARAMS; */

- /* open_args.pathname = my_font_pathname; */

- /* open_args.num_params = 1; */

- /* open_args.params = &parameter; */

- /* */

- /* error = FT_Open_Face( library, &open_args, index, &face ); */

- /* ... */

- /* } */

- /* */

-/* #define TT_CONFIG_OPTION_UNPATENTED_HINTING */

- /*************************************************************************/

- /* */

- /* Define TT_CONFIG_OPTION_INTERPRETER_SWITCH to compile the TrueType */

- /* bytecode interpreter with a huge switch statement, rather than a call */

- /* table. This results in smaller and faster code for a number of */

- /* architectures. */

- /* */

- /* Note however that on some compiler/processor combinations, undefining */

- /* this macro will generate faster, though larger, code. */

- /* */

-#define TT_CONFIG_OPTION_INTERPRETER_SWITCH

- /*************************************************************************/

- /* */

- /* Define TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED to compile the */

- /* TrueType glyph loader to use Apple's definition of how to handle */

- /* component offsets in composite glyphs. */

- /* */

- /* Apple and MS disagree on the default behavior of component offsets */

- /* in composites. Apple says that they should be scaled by the scaling */

- /* factors in the transformation matrix (roughly, it's more complex) */

- /* while MS says they should not. OpenType defines two bits in the */

- /* composite flags array which can be used to disambiguate, but old */

- /* fonts will not have them. */

- /* */

- /* http://www.microsoft.com/typography/otspec/glyf.htm */

- /* http://fonts.apple.com/TTRefMan/RM06/Chap6glyf.html */

- /* */

-#undef TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED

- /*************************************************************************/

- /* */

- /* Define TT_CONFIG_OPTION_GX_VAR_SUPPORT if you want to include */

- /* support for Apple's distortable font technology (fvar, gvar, cvar, */

- /* and avar tables). This has many similarities to Type 1 Multiple */

- /* Masters support. */

- /* */

-#define TT_CONFIG_OPTION_GX_VAR_SUPPORT

- /*************************************************************************/

- /* */

- /* Define TT_CONFIG_OPTION_BDF if you want to include support for */

- /* an embedded `BDF ' table within SFNT-based bitmap formats. */

- /* */

-#define TT_CONFIG_OPTION_BDF

- /*************************************************************************/

- /**** ****/

- /**** T Y P E 1 D R I V E R C O N F I G U R A T I O N ****/

- /**** ****/

- /*************************************************************************/

- /* */

- /* T1_MAX_DICT_DEPTH is the maximum depth of nest dictionaries and */

- /* arrays in the Type 1 stream (see t1load.c). A minimum of 4 is */

- /* required. */

- /* */

-#define T1_MAX_DICT_DEPTH 5

- /*************************************************************************/

- /* */

- /* T1_MAX_SUBRS_CALLS details the maximum number of nested sub-routine */

- /* calls during glyph loading. */

- /* */

-#define T1_MAX_SUBRS_CALLS 16

- /*************************************************************************/

- /* */

- /* T1_MAX_CHARSTRING_OPERANDS is the charstring stack's capacity. A */

- /* minimum of 16 is required. */

- /* */

- /* The Chinese font MingTiEG-Medium (CNS 11643 character set) needs 256. */

- /* */

-#define T1_MAX_CHARSTRINGS_OPERANDS 256

- /*************************************************************************/

- /* */

- /* Define this configuration macro if you want to prevent the */

- /* compilation of `t1afm', which is in charge of reading Type 1 AFM */

- /* files into an existing face. Note that if set, the T1 driver will be */

- /* unable to produce kerning distances. */

- /* */

-#undef T1_CONFIG_OPTION_NO_AFM

- /*************************************************************************/

- /* */

- /* Define this configuration macro if you want to prevent the */

- /* compilation of the Multiple Masters font support in the Type 1 */

- /* driver. */

- /* */

-#undef T1_CONFIG_OPTION_NO_MM_SUPPORT

- /*************************************************************************/

- /**** ****/

- /**** C F F D R I V E R C O N F I G U R A T I O N ****/

- /**** ****/

- /*************************************************************************/

- /* */

- /* CFF_CONFIG_OPTION_OLD_ENGINE controls whether the pre-Adobe CFF */

- /* engine gets compiled into FreeType. If defined, it is possible to */

- /* switch between the two engines using the `hinting-engine' property of */

- /* the cff driver module. */

- /* */

-/* #define CFF_CONFIG_OPTION_OLD_ENGINE */

- /*************************************************************************/

- /**** ****/

- /**** A U T O F I T M O D U L E C O N F I G U R A T I O N ****/

- /**** ****/

- /*************************************************************************/

- /* */

- /* Compile autofit module with CJK (Chinese, Japanese, Korean) script */

- /* support. */

- /* */

-#define AF_CONFIG_OPTION_CJK

- /*************************************************************************/

- /* */

- /* Compile autofit module with Indic script support. */

- /* */

-#define AF_CONFIG_OPTION_INDIC

- /*************************************************************************/

- /* */

- /* Compile autofit module with warp hinting. The idea of the warping */

- /* code is to slightly scale and shift a glyph within a single dimension */

- /* so that as much of its segments are aligned (more or less) on the */

- /* grid. To find out the optimal scaling and shifting value, various */

- /* parameter combinations are tried and scored. */

- /* */

- /* This experimental option is only active if the render mode is */

- /* FT_RENDER_MODE_LIGHT. */

- /* */

-/* #define AF_CONFIG_OPTION_USE_WARPER */

- /* */

- /*

- * This macro is obsolete. Support has been removed in FreeType

- * version 2.5.

- */

-/* #define FT_CONFIG_OPTION_OLD_INTERNALS */

- /*

- * This macro is defined if either unpatented or native TrueType

- * hinting is requested by the definitions above.

- */

-#ifdef TT_CONFIG_OPTION_BYTECODE_INTERPRETER

-#define TT_USE_BYTECODE_INTERPRETER

-#undef TT_CONFIG_OPTION_UNPATENTED_HINTING

-#elif defined TT_CONFIG_OPTION_UNPATENTED_HINTING

-#define TT_USE_BYTECODE_INTERPRETER

-#endif

-FT_END_HEADER

-#endif /* __FTOPTION_H__ */

-/* END */

« gyp/freetype.gypi ('K') | « third_party/freetype/include_overrides/freetype/config/ftmodule.h ('k') | no next file » | no next file with comments »