Update libvpx snapshot to v0.9.7-p1 (Cayuga).

source/libvpx/examples/decode_with_partial_drops.txt

Index: source/libvpx/examples/decode_with_partial_drops.txt
===================================================================
--- source/libvpx/examples/decode_with_partial_drops.txt	(revision 0)
+++ source/libvpx/examples/decode_with_partial_drops.txt	(revision 0)
@@ -0,0 +1,238 @@
+@TEMPLATE decoder_tmpl.c
+Decode With Partial Drops Example
+=========================
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ INTRODUCTION
+This is an example utility which drops a series of frames (or parts of frames),
+as specified on the command line. This is useful for observing the error
+recovery features of the codec.
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ INTRODUCTION
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ EXTRA_INCLUDES
+#include <time.h>
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ EXTRA_INCLUDES
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ HELPERS
+struct parsed_header
+{
+    char key_frame;
+    int version;
+    char show_frame;
+    int first_part_size;
+};
+
+int next_packet(struct parsed_header* hdr, int pos, int length, int mtu)
+{
+    int size = 0;
+    int remaining = length - pos;
+    /* Uncompressed part is 3 bytes for P frames and 10 bytes for I frames */
+    int uncomp_part_size = (hdr->key_frame ? 10 : 3);
+    /* number of bytes yet to send from header and the first partition */
+    int remainFirst = uncomp_part_size + hdr->first_part_size - pos;
+    if (remainFirst > 0)
+    {
+        if (remainFirst <= mtu)
+        {
+            size = remainFirst;
+        }
+        else
+        {
+            size = mtu;
+        }
+
+        return size;
+    }
+
+    /* second partition; just slot it up according to MTU */
+    if (remaining <= mtu)
+    {
+        size = remaining;
+        return size;
+    }
+    return mtu;
+}
+
+void throw_packets(unsigned char* frame, int* size, int loss_rate,
+                   int* thrown, int* kept)
+{
+    unsigned char loss_frame[256*1024];
+    int pkg_size = 1;
+    int pos = 0;
+    int loss_pos = 0;
+    struct parsed_header hdr;
+    unsigned int tmp;
+    int mtu = 1500;
+
+    if (*size < 3)
+    {
+        return;
+    }
+    putc('|', stdout);
+    /* parse uncompressed 3 bytes */
+    tmp = (frame[2] << 16) | (frame[1] << 8) | frame[0];
+    hdr.key_frame = !(tmp & 0x1); /* inverse logic */
+    hdr.version = (tmp >> 1) & 0x7;
+    hdr.show_frame = (tmp >> 4) & 0x1;
+    hdr.first_part_size = (tmp >> 5) & 0x7FFFF;
+
+    /* don't drop key frames */
+    if (hdr.key_frame)
+    {
+        int i;
+        *kept = *size/mtu + ((*size % mtu > 0) ? 1 : 0); /* approximate */
+        for (i=0; i < *kept; i++)
+            putc('.', stdout);
+        return;
+    }
+
+    while ((pkg_size = next_packet(&hdr, pos, *size, mtu)) > 0)
+    {
+        int loss_event = ((rand() + 1.0)/(RAND_MAX + 1.0) < loss_rate/100.0);
+        if (*thrown == 0 && !loss_event)
+        {
+            memcpy(loss_frame + loss_pos, frame + pos, pkg_size);
+            loss_pos += pkg_size;
+            (*kept)++;
+            putc('.', stdout);
+        }
+        else
+        {
+            (*thrown)++;
+            putc('X', stdout);
+        }
+        pos += pkg_size;
+    }
+    memcpy(frame, loss_frame, loss_pos);
+    memset(frame + loss_pos, 0, *size - loss_pos);
+    *size = loss_pos;
+}
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ HELPERS
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DEC_INIT
+/* Initialize codec */
+flags = VPX_CODEC_USE_ERROR_CONCEALMENT;
+res = vpx_codec_dec_init(&codec, interface, &dec_cfg, flags);
+if(res)
+    die_codec(&codec, "Failed to initialize decoder");
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DEC_INIT
+
+Usage
+-----
+This example adds a single argument to the `simple_decoder` example,
+which specifies the range or pattern of frames to drop. The parameter is
+parsed as follows:
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ USAGE
+if(argc < 4 || argc > 6)
+    die("Usage: %s <infile> <outfile> [-t <num threads>] <N-M|N/M|L,S>\n",
+        argv[0]);
+{
+    char *nptr;
+    int arg_num = 3;
+    if (argc == 6 && strncmp(argv[arg_num++], "-t", 2) == 0)
+        dec_cfg.threads = strtol(argv[arg_num++], NULL, 0);
+    n = strtol(argv[arg_num], &nptr, 0);
+    mode = (*nptr == '\0' || *nptr == ',') ? 2 : (*nptr == '-') ? 1 : 0;
+
+    m = strtol(nptr+1, NULL, 0);
+    if((!n && !m) || (*nptr != '-' && *nptr != '/' &&
+        *nptr != '\0' && *nptr != ','))
+        die("Couldn't parse pattern %s\n", argv[3]);
+}
+seed = (m > 0) ? m : (unsigned int)time(NULL);
+srand(seed);thrown_frame = 0;
+printf("Seed: %u\n", seed);
+printf("Threads: %d\n", dec_cfg.threads);
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ USAGE
+
+
+Dropping A Range Of Frames
+--------------------------
+To drop a range of frames, specify the starting frame and the ending
+frame to drop, separated by a dash. The following command will drop
+frames 5 through 10 (base 1).
+
+  $ ./decode_with_partial_drops in.ivf out.i420 5-10
+
+
+Dropping A Pattern Of Frames
+----------------------------
+To drop a pattern of frames, specify the number of frames to drop and
+the number of frames after which to repeat the pattern, separated by
+a forward-slash. The following command will drop 3 of 7 frames.
+Specifically, it will decode 4 frames, then drop 3 frames, and then
+repeat.
+
+  $ ./decode_with_partial_drops in.ivf out.i420 3/7
+
+Dropping Random Parts Of Frames
+-------------------------------
+A third argument tuple is available to split the frame into 1500 bytes pieces
+and randomly drop pieces rather than frames. The frame will be split at
+partition boundaries where possible. The following example will seed the RNG
+with the seed 123 and drop approximately 5% of the pieces. Pieces which
+are depending on an already dropped piece will also be dropped.
+
+  $ ./decode_with_partial_drops in.ivf out.i420 5,123
+
+
+Extra Variables
+---------------
+This example maintains the pattern passed on the command line in the
+`n`, `m`, and `is_range` variables:
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ EXTRA_VARS
+int              n, m, mode;
+unsigned int     seed;
+int              thrown=0, kept=0;
+int              thrown_frame=0, kept_frame=0;
+vpx_codec_dec_cfg_t  dec_cfg = {0};
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ EXTRA_VARS
+
+
+Making The Drop Decision
+------------------------
+The example decides whether to drop the frame based on the current
+frame number, immediately before decoding the frame.
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ PRE_DECODE
+/* Decide whether to throw parts of the frame or the whole frame
+   depending on the drop mode */
+thrown_frame = 0;
+kept_frame = 0;
+switch (mode)
+{
+case 0:
+    if (m - (frame_cnt-1)%m <= n)
+    {
+        frame_sz = 0;
+    }
+    break;
+case 1:
+    if (frame_cnt >= n && frame_cnt <= m)
+    {
+        frame_sz = 0;
+    }
+    break;
+case 2:
+    throw_packets(frame, &frame_sz, n, &thrown_frame, &kept_frame);
+    break;
+default: break;
+}
+if (mode < 2)
+{
+    if (frame_sz == 0)
+    {
+        putc('X', stdout);
+        thrown_frame++;
+    }
+    else
+    {
+        putc('.', stdout);
+        kept_frame++;
+    }
+}
+thrown += thrown_frame;
+kept += kept_frame;
+fflush(stdout);
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ PRE_DECODE