Add all NSS files to allow using a complete NSS in the future.

nss/mozilla/security/nss/lib/libpkix/include/pkix_sample_modules.h

Index: nss/mozilla/security/nss/lib/libpkix/include/pkix_sample_modules.h
===================================================================
--- nss/mozilla/security/nss/lib/libpkix/include/pkix_sample_modules.h	(revision 0)
+++ nss/mozilla/security/nss/lib/libpkix/include/pkix_sample_modules.h	(revision 0)
@@ -0,0 +1,451 @@
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is the PKIX-C library.
+ *
+ * The Initial Developer of the Original Code is
+ * Sun Microsystems, Inc.
+ * Portions created by the Initial Developer are
+ * Copyright 2004-2007 Sun Microsystems, Inc.  All Rights Reserved.
+ *
+ * Contributor(s):
+ *   Sun Microsystems, Inc.
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+/*
+ * This file defines functions associated with CertStore types.
+ *
+ */
+
+
+#ifndef _PKIX_SAMPLEMODULES_H
+#define _PKIX_SAMPLEMODULES_H
+
+#include "pkix_pl_common.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* General
+ *
+ * Please refer to the libpkix Programmer's Guide for detailed information
+ * about how to use the libpkix library. Certain key warnings and notices from
+ * that document are repeated here for emphasis.
+ *
+ * All identifiers in this file (and all public identifiers defined in
+ * libpkix) begin with "PKIX_". Private identifiers only intended for use
+ * within the library begin with "pkix_".
+ *
+ * A function returns NULL upon success, and a PKIX_Error pointer upon failure.
+ *
+ * Unless otherwise noted, for all accessor (gettor) functions that return a
+ * PKIX_PL_Object pointer, callers should assume that this pointer refers to a
+ * shared object. Therefore, the caller should treat this shared object as
+ * read-only and should not modify this shared object. When done using the
+ * shared object, the caller should release the reference to the object by
+ * using the PKIX_PL_Object_DecRef function.
+ *
+ * While a function is executing, if its arguments (or anything referred to by
+ * its arguments) are modified, free'd, or destroyed, the function's behavior
+ * is undefined.
+ *
+ */
+
+/* PKIX_PL_CollectionCertStore
+ *
+ * A PKIX_CollectionCertStore provides an example for showing how to retrieve
+ * certificates and CRLs from a repository, such as a directory in the system.
+ * It is expected the directory is an absolute directory which contains CRL
+ * and Cert data files.  CRL files are expected to have the suffix of .crl
+ * and Cert files are expected to have the suffix of .crt .
+ *
+ * Once the caller has created the CollectionCertStoreContext object, the caller
+ * then can call pkix_pl_CollectionCertStore_GetCert or
+ * pkix_pl_CollectionCertStore_GetCRL to obtain Lists of PKIX_PL_Cert or
+ * PKIX_PL_CRL objects, respectively.
+ */
+
+/*
+ * FUNCTION: PKIX_PL_CollectionCertStore_Create
+ * DESCRIPTION:
+ *
+ *  Creates a new CollectionCertStore and returns it at
+ *      "pColCertStore".
+ *
+ * PARAMETERS:
+ *  "storeDir"
+ *      The absolute path where *.crl files are located.
+ *  "pColCertStoreContext"
+ *      Address where object pointer will be stored. Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Thread Safe (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CollectionCertStoreContext Error if the function fails in
+ *      a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_PL_CollectionCertStore_Create(
+        PKIX_PL_String *storeDir,
+        PKIX_CertStore **pCertStore,
+        void *plContext);
+
+/* PKIX_PL_PK11CertStore
+ *
+ * A PKIX_PL_PK11CertStore retrieves certificates and CRLs from a PKCS11
+ * database. The directory that contains the cert8.db, key3.db, and secmod.db
+ * files that comprise a PKCS11 database are specified in NSS initialization.
+ *
+ * Once the caller has created the Pk11CertStore object, the caller can call
+ * pkix_pl_Pk11CertStore_GetCert or pkix_pl_Pk11CertStore_GetCert to obtain
+ * a List of PKIX_PL_Certs or PKIX_PL_CRL objects, respectively.
+ */
+
+/*
+ * FUNCTION: PKIX_PL_Pk11CertStore_Create
+ * DESCRIPTION:
+ *
+ *  Creates a new Pk11CertStore and returns it at "pPk11CertStore".
+ *
+ * PARAMETERS:
+ *  "pPk11CertStore"
+ *      Address where object pointer will be stored. Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Thread Safe (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertStore Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_PL_Pk11CertStore_Create(
+        PKIX_CertStore **pPk11CertStore,
+        void *plContext);
+
+/* PKIX_PL_LdapCertStore
+ *
+ * A PKIX_PL_LdapCertStore retrieves certificates and CRLs from an LDAP server
+ * over a socket connection. It used the LDAP protocol as described in RFC1777.
+ *
+ * Once the caller has created the LdapCertStore object, the caller can call
+ * pkix_pl_LdapCertStore_GetCert or pkix_pl_LdapCertStore_GetCert to obtain
+ * a List of PKIX_PL_Certs or PKIX_PL_CRL objects, respectively.
+ */
+
+/*
+ * FUNCTION: PKIX_PL_LdapDefaultClient_Create
+ * DESCRIPTION:
+ *
+ *  Creates an LdapDefaultClient using the PRNetAddr poined to by "sockaddr",
+ *  with a timeout value of "timeout", and a BindAPI pointed to by "bindAPI";
+ *  and stores the address of the default LdapClient at "pClient".
+ *
+ *  At the time of this version, there are unresolved questions about the LDAP
+ *  protocol. Although RFC1777 describes a BIND and UNBIND message, it is not
+ *  clear whether they are appropriate to this application. We have tested only
+ *  using servers that do not expect authentication, and that reject BIND
+ *  messages. It is not clear what values might be appropriate for the bindname
+ *  and authentication fields, which are currently implemented as char strings
+ *  supplied by the caller. (If this changes, the API and possibly the templates
+ *  will have to change.) Therefore the Client_Create API contains a BindAPI
+ *  structure, a union, which will have to be revised and extended when this
+ *  area of the protocol is better understood.
+ *
+ * PARAMETERS:
+ *  "sockaddr"
+ *      Address of the PRNetAddr to be used for the socket connection. Must be
+ *      non-NULL.
+ *  "timeout"
+ *      The PRIntervalTime value to be used as a timeout value in socket calls;
+ *      a zero value indicates non-blocking I/O is to be used.
+ *  "bindAPI"
+ *      The address of a BindAPI to be used if a BIND message is required. If
+ *      this argument is NULL, no Bind (or Unbind) will be sent.
+ *  "pClient"
+ *      Address where object pointer will be stored. Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Thread Safe (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertStore Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_PL_LdapDefaultClient_Create(
+        PRNetAddr *sockaddr,
+        PRIntervalTime timeout,
+        LDAPBindAPI *bindAPI,
+        PKIX_PL_LdapDefaultClient **pClient,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_PL_LdapDefaultClient_CreateByName
+ * DESCRIPTION:
+ *
+ *  Creates an LdapDefaultClient using the hostname poined to by "hostname",
+ *  with a timeout value of "timeout", and a BindAPI pointed to by "bindAPI";
+ *  and stores the address of the default LdapClient at "pClient".
+ *
+ *  At the time of this version, there are unresolved questions about the LDAP
+ *  protocol. Although RFC1777 describes a BIND and UNBIND message, it is not
+ *  clear whether they are appropriate to this application. We have tested only
+ *  using servers that do not expect authentication, and that reject BIND
+ *  messages. It is not clear what values might be appropriate for the bindname
+ *  and authentication fields, which are currently implemented as char strings
+ *  supplied by the caller. (If this changes, the API and possibly the templates
+ *  will have to change.) Therefore the Client_Create API contains a BindAPI
+ *  structure, a union, which will have to be revised and extended when this
+ *  area of the protocol is better understood.
+ *
+ * PARAMETERS:
+ *  "hostname"
+ *      Address of the hostname to be used for the socket connection. Must be
+ *      non-NULL.
+ *  "timeout"
+ *      The PRIntervalTime value to be used as a timeout value in socket calls;
+ *      a zero value indicates non-blocking I/O is to be used.
+ *  "bindAPI"
+ *      The address of a BindAPI to be used if a BIND message is required. If
+ *      this argument is NULL, no Bind (or Unbind) will be sent.
+ *  "pClient"
+ *      Address where object pointer will be stored. Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Thread Safe (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertStore Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_PL_LdapDefaultClient_CreateByName(
+        char *hostname,
+        PRIntervalTime timeout,
+        LDAPBindAPI *bindAPI,
+        PKIX_PL_LdapDefaultClient **pClient,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_PL_LdapCertStore_Create
+ * DESCRIPTION:
+ *
+ *  Creates a new LdapCertStore using the LdapClient pointed to by "client",
+ *  and stores the address of the CertStore at "pCertStore".
+ *
+ * PARAMETERS:
+ *  "client"
+ *      Address of the LdapClient to be used. Must be non-NULL.
+ *  "pCertStore"
+ *      Address where object pointer will be stored. Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Thread Safe (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertStore Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_PL_LdapCertStore_Create(
+        PKIX_PL_LdapClient *client,
+        PKIX_CertStore **pCertStore,
+        void *plContext);
+
+/* PKIX_PL_NssContext
+ *
+ * A PKIX_PL_NssContext provides an example showing how the "plContext"
+ * argument, that is part of every libpkix function call, can be used.
+ * The "plContext" is the Portability Layer Context, which can be used
+ * to communicate layer-specific information from the application to the
+ * underlying Portability Layer (while bypassing the Portable Code, which
+ * blindly passes the plContext on to every function call).
+ *
+ * In this case, NSS serves as both the application and the Portability Layer.
+ * We define an NSS-specific structure, which includes an arena and a number
+ * of SECCertificateUsage bit flags encoded as a PKIX_UInt32. A third argument,
+ * wincx, is used on Windows platforms for PKCS11 access, and should be set to
+ * NULL for other platforms.
+ * Before calling any of the libpkix functions, the caller should create the NSS
+ * context, by calling PKIX_PL_NssContext_Create, and provide that NSS context
+ * as the "plContext" argument in every libpkix function call the caller makes.
+ * When the caller is finished using the NSS context (usually just after he
+ * calls PKIX_Shutdown), the caller should call PKIX_PL_NssContext_Destroy to
+ * free the NSS context structure.
+ */
+
+/*
+ * FUNCTION: PKIX_PL_NssContext_Create
+ * DESCRIPTION:
+ *
+ *  Creates a new NssContext using the certificate usage(s) specified by
+ *  "certUsage" and stores it at "pNssContext". This function also internally
+ *  creates an arena and stores it as part of the NssContext structure. Unlike
+ *  most other libpkix API functions, this function does not take a "plContext"
+ *  parameter.
+ *
+ * PARAMETERS:
+ *  "certUsage"
+ *      The desired SECCertificateUsage(s).
+ *  "useNssArena"
+ *      Boolean flag indicates NSS Arena is used for memory allocation.
+ *  "wincx"
+ *      A Windows-dependent pointer for PKCS11 token handling.
+ *  "pNssContext"
+ *      Address where object pointer will be stored. Must be non-NULL.
+ * THREAD SAFETY:
+ *  Thread Safe (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a Context Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_PL_NssContext_Create(
+        PKIX_UInt32 certificateUsage,
+        PKIX_Boolean useNssArena,
+        void *wincx,
+        void **pNssContext);
+
+/*
+ * FUNCTION: PKIX_PL_NssContext_Destroy
+ * DESCRIPTION:
+ *
+ *  Frees the structure pointed to by "nssContext" along with any of its
+ *  associated memory. Unlike most other libpkix API functions, this function
+ *  does not take a "plContext" parameter.
+ *
+ * PARAMETERS:
+ *  "nssContext"
+ *      Address of NssContext to be destroyed. Must be non-NULL.
+ * THREAD SAFETY:
+ *  Thread Safe (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a Context Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_PL_NssContext_Destroy(
+        void *nssContext);
+
+/*
+ * FUNCTION: PKIX_PL_NssContext_SetTimeout
+ * DESCRIPTION:
+ *
+ * Sets IO timeout for network operations like OCSP response and cert
+ * fetching.
+ *
+ * PARAMETERS:
+ *  "nssContext"
+ *      Address of NssContext to be destroyed. Must be non-NULL.
+ * THREAD SAFETY:
+ *  Thread Safe (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a Context Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_PL_NssContext_SetTimeout(PKIX_UInt32 timeout, PKIX_PL_NssContext *nssContext);
+
+/*
+ * FUNCTION: PKIX_PL_NssContext_SetMaxResponseLen
+ * DESCRIPTION:
+ *
+ * Sets maximum responce length allowed during network IO operations.
+ *
+ * PARAMETERS:
+ *  "nssContext"
+ *      Address of NssContext to be destroyed. Must be non-NULL.
+ * THREAD SAFETY:
+ *  Thread Safe (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a Context Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_PL_NssContext_SetMaxResponseLen(PKIX_UInt32 len, PKIX_PL_NssContext *nssContext);
+
+/*
+ * FUNCTION: PKIX_PL_NssContext_SetCrlReloadDelay
+ * DESCRIPTION:
+ *
+ * Sets user defined timeout between attempts to load crl using
+ * CRLDP.
+ *
+ * PARAMETERS:
+ *  "delaySeconds"
+ *      Reload delay in seconds.
+ *  "nssContext"
+ *      Address of NssContext to be destroyed. Must be non-NULL.
+ * THREAD SAFETY:
+ *  Thread Safe (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a Context Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_PL_NssContext_SetCrlReloadDelay(PKIX_UInt32 delaySeconds,
+                                       PKIX_PL_NssContext *nssContext);
+
+/*
+ * FUNCTION: PKIX_PL_NssContext_SetBadDerCrlReloadDelay
+ * DESCRIPTION:
+ *
+ * Sets user defined timeout between attempts to load crls
+ * that failed to decode.
+ *
+ * PARAMETERS:
+ *  "delaySeconds"
+ *      Reload delay in seconds.
+ *  "nssContext"
+ *      Address of NssContext to be destroyed. Must be non-NULL.
+ * THREAD SAFETY:
+ *  Thread Safe (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a Context Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_PL_NssContext_SetBadDerCrlReloadDelay(PKIX_UInt32 delaySeconds,
+                                           PKIX_PL_NssContext *nssContext);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _PKIX_SAMPLEMODULES_H */
Property changes on: nss/mozilla/security/nss/lib/libpkix/include/pkix_sample_modules.h
___________________________________________________________________
Added: svn:executable
   + *
Added: svn:eol-style
   + LF