Add all NSS files to allow using a complete NSS in the future.

nss/mozilla/security/nss/lib/libpkix/include/pkix_certsel.h

Index: nss/mozilla/security/nss/lib/libpkix/include/pkix_certsel.h
===================================================================
--- nss/mozilla/security/nss/lib/libpkix/include/pkix_certsel.h	(revision 0)
+++ nss/mozilla/security/nss/lib/libpkix/include/pkix_certsel.h	(revision 0)
@@ -0,0 +1,1859 @@
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is the PKIX-C library.
+ *
+ * The Initial Developer of the Original Code is
+ * Sun Microsystems, Inc.
+ * Portions created by the Initial Developer are
+ * Copyright 2004-2007 Sun Microsystems, Inc.  All Rights Reserved.
+ *
+ * Contributor(s):
+ *   Sun Microsystems, Inc.
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+/*
+ * This file defines functions associated with the PKIX_CertSelector and the
+ * PKIX_ComCertSelParams types.
+ *
+ */
+
+#ifndef _PKIX_CERTSEL_H
+#define _PKIX_CERTSEL_H
+
+#include "pkixt.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* General
+ *
+ * Please refer to the libpkix Programmer's Guide for detailed information
+ * about how to use the libpkix library. Certain key warnings and notices from
+ * that document are repeated here for emphasis.
+ *
+ * All identifiers in this file (and all public identifiers defined in
+ * libpkix) begin with "PKIX_". Private identifiers only intended for use
+ * within the library begin with "pkix_".
+ *
+ * A function returns NULL upon success, and a PKIX_Error pointer upon failure.
+ *
+ * Unless otherwise noted, for all accessor (gettor) functions that return a
+ * PKIX_PL_Object pointer, callers should assume that this pointer refers to a
+ * shared object. Therefore, the caller should treat this shared object as
+ * read-only and should not modify this shared object. When done using the
+ * shared object, the caller should release the reference to the object by
+ * using the PKIX_PL_Object_DecRef function.
+ *
+ * While a function is executing, if its arguments (or anything referred to by
+ * its arguments) are modified, free'd, or destroyed, the function's behavior
+ * is undefined.
+ *
+ */
+
+/* PKIX_CertSelector
+ *
+ * PKIX_CertSelectors provide a standard way for the caller to select
+ * certificates based on particular criteria. A CertSelector is typically used
+ * by the caller to specify the constraints they wish to impose on the target
+ * certificate in a chain. (see pkix_params.h) A CertSelector is also often
+ * used to retrieve certificates from a CertStore that match the selector's
+ * criteria. (See pkix_certstore.h) For example, the caller may wish to only
+ * select those certificates that have a particular Subject Distinguished Name
+ * and a particular value for a private certificate extension. The
+ * MatchCallback allows the caller to specify the custom matching logic to be
+ * used by a CertSelector.
+ *
+ * By default, the MatchCallback is set to point to the default implementation
+ * provided by libpkix, which understands how to process the most common
+ * parameters. If the default implementation is used, the caller should set
+ * these common parameters using PKIX_CertSelector_SetCommonCertSelectorParams.
+ * Any common parameter that is not set is assumed to be disabled, which means
+ * the default MatchCallback implementation will select all certificates
+ * without regard to that particular disabled parameter. For example, if the
+ * SerialNumber parameter is not set, MatchCallback will not filter out any
+ * certificate based on its serial number. As such, if no parameters are set,
+ * all are disabled and any certificate will match. If a parameter is
+ * disabled, its associated PKIX_ComCertSelParams_Get* function returns a
+ * default value of NULL, or -1 for PKIX_ComCertSelParams_GetBasicConstraints
+ * and PKIX_ComCertSelParams_GetVersion, or 0 for
+ * PKIX_ComCertSelParams_GetKeyUsage.
+ *
+ * If a custom implementation is desired, the default implementation can be
+ * overridden by calling PKIX_CertSelector_SetMatchCallback. In this case, the
+ * CertSelector can be initialized with a certSelectorContext, which is where
+ * the caller can specify the desired parameters the caller wishes to match
+ * against. Note that this certSelectorContext must be an Object (although any
+ * object type), allowing it to be reference-counted and allowing it to
+ * provide the standard Object functions (Equals, Hashcode, ToString, Compare,
+ * Duplicate).
+ *
+ */
+
+/*
+ * FUNCTION: PKIX_CertSelector_MatchCallback
+ * DESCRIPTION:
+ *
+ *  This callback function determines whether the specified Cert pointed to by
+ *  "cert" matches the criteria of the CertSelector pointed to by "selector".
+ *  If the Cert does not matches the CertSelector's criteria, an exception will
+ *  be thrown.
+ *
+ * PARAMETERS:
+ *  "selector"
+ *      Address of CertSelector whose MatchCallback logic and parameters are
+ *      to be used. Must be non-NULL.
+ *  "cert"
+ *      Address of Cert that is to be matched using "selector".
+ *      Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Thread Safe
+ *
+ *  Multiple threads must be able to safely call this function without
+ *  worrying about conflicts, even if they're operating on the same object.
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+typedef PKIX_Error *
+(*PKIX_CertSelector_MatchCallback)(
+        PKIX_CertSelector *selector,
+        PKIX_PL_Cert *cert,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_CertSelector_Create
+ * DESCRIPTION:
+ *
+ *  Creates a new CertSelector using the Object pointed to by
+ *  "certSelectorContext" (if any) and stores it at "pSelector". As noted
+ *  above, by default, the MatchCallback is set to point to the default
+ *  implementation provided by libpkix, which understands how to process
+ *  ComCertSelParams objects. This is overridden if the MatchCallback pointed
+ *  to by "callback" is not NULL, in which case the parameters are specified
+ *  using the certSelectorContext.
+ *
+ * PARAMETERS:
+ *  "callback"
+ *      The MatchCallback function to be used.
+ *  "certSelectorContext"
+ *      Address of Object representing the CertSelector's context (if any).
+ *  "pSelector"
+ *      Address where object pointer will be stored. Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Thread Safe (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_CertSelector_Create(
+        PKIX_CertSelector_MatchCallback callback,
+        PKIX_PL_Object *certSelectorContext,
+        PKIX_CertSelector **pSelector,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_CertSelector_GetMatchCallback
+ * DESCRIPTION:
+ *
+ *  Retrieves a pointer to "selector's" Match callback function and puts it in
+ *  "pCallback".
+ *
+ * PARAMETERS:
+ *  "selector"
+ *      The CertSelector whose Match callback is desired. Must be non-NULL.
+ *  "pCallback"
+ *      Address where Match callback function pointer will be stored.
+ *      Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Thread Safe (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_CertSelector_GetMatchCallback(
+        PKIX_CertSelector *selector,
+        PKIX_CertSelector_MatchCallback *pCallback,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_CertSelector_GetCertSelectorContext
+ * DESCRIPTION:
+ *
+ *  Retrieves a pointer to a PKIX_PL_Object representing the context (if any)
+ *  of the CertSelector pointed to by "selector" and stores it at
+ *  "pCertSelectorContext".
+ *
+ * PARAMETERS:
+ *  "selector"
+ *      Address of CertSelector whose context is to be stored.
+ *      Must be non-NULL.
+ *  "pCertSelectorContext"
+ *      Address where object pointer will be stored. Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Thread Safe (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_CertSelector_GetCertSelectorContext(
+        PKIX_CertSelector *selector,
+        PKIX_PL_Object **pCertSelectorContext,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_CertSelector_GetCommonCertSelectorParams
+ * DESCRIPTION:
+ *
+ *  Retrieves a pointer to the ComCertSelParams object that represent the
+ *  common parameters of the CertSelector pointed to by "selector" and stores
+ *  it at "pCommonCertSelectorParams". If there are no common parameters
+ *  stored with the CertSelector, this function stores NULL at
+ *  "pCommonCertSelectorParams".
+ *
+ * PARAMETERS:
+ *  "selector"
+ *      Address of CertSelector whose ComCertSelParams object is to be stored.
+ *      Must be non-NULL.
+ *  "pCommonCertSelectorParams"
+ *      Address where object pointer will be stored. Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Conditionally Thread Safe
+ *      (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_CertSelector_GetCommonCertSelectorParams(
+        PKIX_CertSelector *selector,
+        PKIX_ComCertSelParams **pCommonCertSelectorParams,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_CertSelector_SetCommonCertSelectorParams
+ * DESCRIPTION:
+ *
+ *  Sets the common parameters for the CertSelector pointed to by "selector"
+ *  using the ComCertSelParams object pointed to by "commonCertSelectorParams".
+ *
+ * PARAMETERS:
+ *  "selector"
+ *      Address of CertSelector whose common parameters are to be set.
+ *      Must be non-NULL.
+ *  "commonCertSelectorParams"
+ *      Address of ComCertSelParams object representing the common parameters.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Not Thread Safe - assumes exclusive access to "selector"
+ *  (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_CertSelector_SetCommonCertSelectorParams(
+        PKIX_CertSelector *selector,
+        PKIX_ComCertSelParams *commonCertSelectorParams,
+        void *plContext);
+
+/* PKIX_ComCertSelParams
+ *
+ * PKIX_ComCertSelParams objects are X.509 parameters commonly used with
+ * CertSelectors, especially when enforcing constraints on a target
+ * certificate or determining which certificates to retrieve from a CertStore.
+ * ComCertSelParams objects are typically used with those CertSelectors that
+ * use the default implementation of MatchCallback, which understands how to
+ * process ComCertSelParams objects.
+ */
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_Create
+ * DESCRIPTION:
+ *
+ *  Creates a new ComCertSelParams object and stores it at "pParams".
+ *
+ * PARAMETERS:
+ *  "pParams"
+ *      Address where object pointer will be stored. Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Thread Safe (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_Create(
+        PKIX_ComCertSelParams **pParams,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_GetSubjAltNames
+ * DESCRIPTION:
+ *
+ *  Retrieves a pointer to the List of GeneralNames (if any) representing the
+ *  subject alternative names criterion that is set in the ComCertSelParams
+ *  object pointed to by "params" and stores it at "pNames". In order to match
+ *  against this criterion, a certificate must contain all or at least one of
+ *  the criterion's subject alternative names (depending on the result of
+ *  PKIX_ComCertSelParams_GetMatchAllSubjAltNames). The default behavior
+ *  requires a certificate to contain all of the criterion's subject
+ *  alternative names in order to match.
+ *
+ *  If "params" does not have this criterion set, this function stores NULL at
+ *  "pNames", in which case all certificates are considered to match this
+ *  criterion.
+ *
+ *  Note that the List returned by this function is immutable.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose subject alternative names
+ *      criterion (if any) is to be stored. Must be non-NULL.
+ *  "pNames"
+ *      Address where object pointer will be stored. Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Conditionally Thread Safe
+ *      (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_GetSubjAltNames(
+        PKIX_ComCertSelParams *params,
+        PKIX_List **pNames, /* list of PKIX_PL_GeneralName */
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_SetSubjAltNames
+ * DESCRIPTION:
+ *
+ *  Sets the subject alternative names criterion of the ComCertSelParams object
+ *  pointed to by "params" using a List of GeneralNames pointed to by "names".
+ *  In order to match against this criterion, a certificate must contain all or
+ *  at least one of the criterion's subject alternative names (depending on the
+ *  result of PKIX_ComCertSelParams_GetMatchAllSubjAltNames). The default
+ *  behavior requires a certificate to contain all of the criterion's subject
+ *  alternative names in order to match.
+ *
+ *  If "names" is NULL, all certificates are considered to match this
+ *  criterion.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose subject alternative
+ *      names criterion is to be set. Must be non-NULL.
+ *  "names"
+ *      Address of List of GeneralNames used to set the criterion
+ *      (or NULL to disable the criterion).
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Not Thread Safe - assumes exclusive access to "params"
+ *  (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_SetSubjAltNames(
+        PKIX_ComCertSelParams *params,
+        PKIX_List *names,  /* list of PKIX_PL_GeneralName */
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_AddSubjAltName
+ * DESCRIPTION:
+ *
+ *  Adds to the subject alternative names criterion of the ComCertSelParams
+ *  object pointed to by "params" using the GeneralName pointed to by "name".
+ *  In order to match against this criterion, a certificate must contain all
+ *  or at least one of the criterion's subject alternative names (depending on
+ *  the result of PKIX_ComCertSelParams_GetMatchAllSubjAltNames). The default
+ *  behavior requires a certificate to contain all of the criterion's subject
+ *  alternative names in order to match.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose subject alternative names
+ *      criterion is to be added to. Must be non-NULL.
+ *  "name"
+ *      Address of GeneralName to be added.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Not Thread Safe - assumes exclusive access to "params"
+ *  (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_AddSubjAltName(
+        PKIX_ComCertSelParams *params,
+        PKIX_PL_GeneralName *name,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_GetPathToNames
+ * DESCRIPTION:
+ *
+ *  Retrieves a pointer to the List of GeneralNames (if any) representing the
+ *  path to names criterion that is set in the ComCertSelParams object pointed
+ *  to by "params" and stores it at "pNames". In order to match against this
+ *  criterion, a certificate must not include name constraints that would
+ *  prohibit building a path to the criterion's specified names.
+ *
+ *  If "params" does not have this criterion set, this function stores NULL at
+ *  "pNames", in which case all certificates are considered to match this
+ *  criterion.
+ *
+ *  Note that the List returned by this function is immutable.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose path to names criterion
+ *      (if any) is to be stored. Must be non-NULL.
+ *  "pNames"
+ *      Address where object pointer will be stored. Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Conditionally Thread Safe
+ *      (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_GetPathToNames(
+        PKIX_ComCertSelParams *params,
+        PKIX_List **pNames,  /* list of PKIX_PL_GeneralName */
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_SetPathToNames
+ * DESCRIPTION:
+ *
+ *  Sets the path to names criterion of the ComCertSelParams object pointed to
+ *  by "params" using a List of GeneralNames pointed to by "names". In order to
+ *  match against this criterion, a certificate must not include name
+ *  constraints that would prohibit building a path to the criterion's
+ *  specified names.
+ *
+ *  If "names" is NULL, all certificates are considered to match this
+ *  criterion.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose path to names criterion
+ *      is to be set. Must be non-NULL.
+ *  "names"
+ *      Address of List of GeneralNames used to set the criterion
+ *      (or NULL to disable the criterion).
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Not Thread Safe - assumes exclusive access to "params"
+ *  (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_SetPathToNames(
+        PKIX_ComCertSelParams *params,
+        PKIX_List *names,    /* list of PKIX_PL_GeneralName */
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_AddPathToName
+ * DESCRIPTION:
+ *
+ *  Adds to the path to names criterion of the ComCertSelParams object pointed
+ *  to by "params" using the GeneralName pointed to by "pathToName". In order
+ *  to match against this criterion, a certificate must not include name
+ *  constraints that would prohibit building a path to the criterion's
+ *  specified names.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose path to names criterion is to
+ *      be added to. Must be non-NULL.
+ *  "pathToName"
+ *      Address of GeneralName to be added.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Not Thread Safe - assumes exclusive access to "params"
+ *  (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_AddPathToName(
+        PKIX_ComCertSelParams *params,
+        PKIX_PL_GeneralName *pathToName,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_GetAuthorityKeyIdentifier
+ * DESCRIPTION:
+ *
+ *  Retrieves a pointer to the ByteArray (if any) representing the authority
+ *  key identifier criterion that is set in the ComCertSelParams object
+ *  pointed to by "params" and stores it at "pAuthKeyId". In order to match
+ *  against this criterion, a certificate must contain an
+ *  AuthorityKeyIdentifier extension whose value matches the criterion's
+ *  authority key identifier value.
+ *
+ *  If "params" does not have this criterion set, this function stores NULL at
+ *  "pAuthKeyId", in which case all certificates are considered to match this
+ *  criterion.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose authority key identifier
+ *      criterion (if any) is to be stored. Must be non-NULL.
+ *  "pAuthKeyId"
+ *      Address where object pointer will be stored. Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Conditionally Thread Safe
+ *      (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_GetAuthorityKeyIdentifier(
+        PKIX_ComCertSelParams *params,
+        PKIX_PL_ByteArray **pAuthKeyId,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_SetAuthorityKeyIdentifier
+ * DESCRIPTION:
+ *
+ *  Sets the authority key identifier criterion of the ComCertSelParams object
+ *  pointed to by "params" to the ByteArray pointed to by "authKeyId". In
+ *  order to match against this criterion, a certificate must contain an
+ *  AuthorityKeyIdentifier extension whose value matches the criterion's
+ *  authority key identifier value.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose authority key identifier
+ *      criterion is to be set. Must be non-NULL.
+ *  "authKeyId"
+ *      Address of ByteArray used to set the criterion
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Not Thread Safe - assumes exclusive access to "params"
+ *  (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_SetAuthorityKeyIdentifier(
+        PKIX_ComCertSelParams *params,
+        PKIX_PL_ByteArray *authKeyId,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_GetSubjKeyIdentifier
+ * DESCRIPTION:
+ *
+ *  Retrieves a pointer to the ByteArray (if any) representing the subject key
+ *  identifier criterion that is set in the ComCertSelParams object pointed to
+ *  by "params" and stores it at "pSubjKeyId". In order to match against this
+ *  criterion, a certificate must contain a SubjectKeyIdentifier extension
+ *  whose value matches the criterion's subject key identifier value.
+ *
+ *  If "params" does not have this criterion set, this function stores NULL at
+ *  "pSubjKeyId", in which case all certificates are considered to match this
+ *  criterion.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose subject key identifier
+ *      criterion (if any) is to be stored. Must be non-NULL.
+ *  "pSubjKeyId"
+ *      Address where object pointer will be stored. Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Conditionally Thread Safe
+ *      (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_GetSubjKeyIdentifier(
+        PKIX_ComCertSelParams *params,
+        PKIX_PL_ByteArray **pSubjKeyId,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_SetSubjKeyIdentifier
+ * DESCRIPTION:
+ *
+ *  Sets the subject key identifier criterion of the ComCertSelParams object
+ *  pointed to by "params" using a ByteArray pointed to by "subjKeyId". In
+ *  order to match against this criterion, a certificate must contain an
+ *  SubjectKeyIdentifier extension whose value matches the criterion's subject
+ *  key identifier value.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose subject key identifier
+ *      criterion is to be set. Must be non-NULL.
+ *  "subjKeyId"
+ *      Address of ByteArray used to set the criterion
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Not Thread Safe - assumes exclusive access to "params"
+ *  (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_SetSubjKeyIdentifier(
+        PKIX_ComCertSelParams *params,
+        PKIX_PL_ByteArray *subKeyId,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_GetSubjPubKey
+ * DESCRIPTION:
+ *
+ *  Retrieves a pointer to the PublicKey (if any) representing the subject
+ *  public key criterion that is set in the ComCertSelParams object pointed to
+ *  by "params" and stores it at "pPubKey". In order to match against this
+ *  criterion, a certificate must contain a SubjectPublicKey that matches the
+ *  criterion's public key.
+ *
+ *  If "params" does not have this criterion set, this function stores NULL at
+ *  "pPubKey", in which case all certificates are considered to match this
+ *  criterion.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose subject public key criterion
+ *      (if any) is to be stored. Must be non-NULL.
+ *  "pPubKey"
+ *      Address where object pointer will be stored. Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Conditionally Thread Safe
+ *      (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_GetSubjPubKey(
+        PKIX_ComCertSelParams *params,
+        PKIX_PL_PublicKey **pPubKey,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_SetSubjPubKey
+ * DESCRIPTION:
+ *
+ *  Sets the subject public key criterion of the ComCertSelParams object
+ *  pointed to by "params" using a PublicKey pointed to by "pubKey". In order
+ *  to match against this criterion, a certificate must contain a
+ *  SubjectPublicKey that matches the criterion's public key.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose subject public key
+ *      criterion is to be set. Must be non-NULL.
+ *  "pubKey"
+ *      Address of PublicKey used to set the criterion
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Not Thread Safe - assumes exclusive access to "params"
+ *  (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_SetSubjPubKey(
+        PKIX_ComCertSelParams *params,
+        PKIX_PL_PublicKey *pubKey,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_GetSubjPKAlgId
+ * DESCRIPTION:
+ *
+ *  Retrieves a pointer to the OID (if any) representing the subject public key
+ *  algorithm identifier criterion that is set in the ComCertSelParams object
+ *  pointed to by "params" and stores it at "pPubKey". In order to match
+ *  against this criterion, a certificate must contain a SubjectPublicKey with
+ *  an algorithm that matches the criterion's algorithm.
+ *
+ *  If "params" does not have this criterion set, this function stores NULL at
+ *  "pAlgId", in which case all certificates are considered to match this
+ *  criterion.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose subject public key algorithm
+ *      identifier (if any) is to be stored. Must be non-NULL.
+ *  "pAlgId"
+ *      Address where object pointer will be stored. Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Conditionally Thread Safe
+ *      (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_GetSubjPKAlgId(
+        PKIX_ComCertSelParams *params,
+        PKIX_PL_OID **pAlgId,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_SetSubjPKAlgId
+ * DESCRIPTION:
+ *
+ *  Sets the subject public key algorithm identifier criterion of the
+ *  ComCertSelParams object pointed to by "params" using an OID pointed to by
+ *  "algId". In order to match against this criterion, a certificate must
+ *  contain a SubjectPublicKey with an algorithm that matches the criterion's
+ *  algorithm.
+ *
+ *  If "algId" is NULL, all certificates are considered to match this
+ *  criterion.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose subject public key
+ *      algorithm identifier criterion is to be set. Must be non-NULL.
+ *  "algId"
+ *      Address of OID used to set criterion
+ *      (or NULL to disable the criterion).
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Not Thread Safe - assumes exclusive access to "params"
+ *  (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_SetSubjPKAlgId(
+        PKIX_ComCertSelParams *params,
+        PKIX_PL_OID *algId,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_GetBasicConstraints
+ * DESCRIPTION:
+ *
+ *  Retrieves a pointer to the minimum path length (if any) representing the
+ *  basic constraints criterion that is set in the ComCertSelParams object
+ *  pointed to by "params" and stores it at "pMinPathLength". In order to
+ *  match against this criterion, there are several possibilities.
+ *
+ *  1) If the criterion's minimum path length is greater than or equal to zero,
+ *  a certificate must include a BasicConstraints extension with a pathLen of
+ *  at least this value.
+ *
+ *  2) If the criterion's minimum path length is -2, a certificate must be an
+ *  end-entity certificate.
+ *
+ *  3) If the criterion's minimum path length is -1, no basic constraints check
+ *  is done and all certificates are considered to match this criterion.
+ *
+ *  The semantics of other values of the criterion's minimum path length are
+ *  undefined but may be defined in future versions of the API.
+ *
+ *  If "params" does not have this criterion set, this function stores -1 at
+ *  "pMinPathLength", in which case all certificates are considered to match
+ *  this criterion.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose basic constraints criterion
+ *      (if any) is to be stored. Must be non-NULL.
+ *  "pMinPathLength"
+ *      Address where PKIX_Int32 will be stored. Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Conditionally Thread Safe
+ *      (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_GetBasicConstraints(
+        PKIX_ComCertSelParams *params,
+        PKIX_Int32 *pMinPathLength,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_SetBasicConstraints
+ * DESCRIPTION:
+ *
+ *  Sets the basic constraints criterion of the ComCertSelParams object
+ *  pointed to by "params" using the integer value of "minPathLength". In
+ *  order to match against this criterion, there are several possibilities.
+ *
+ *  1) If the criterion's minimum path length is greater than or equal to zero,
+ *  a certificate must include a BasicConstraints extension with a pathLen of
+ *  at least this value.
+ *
+ *  2) If the criterion's minimum path length is -2, a certificate must be an
+ *  end-entity certificate.
+ *
+ *  3) If the criterion's minimum path length is -1, no basic constraints check
+ *  is done and all certificates are considered to match this criterion.
+ *
+ *  The semantics of other values of the criterion's minimum path length are
+ *  undefined but may be defined in future versions of the API.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose basic constraints
+ *      criterion is to be set. Must be non-NULL.
+ *  "minPathLength"
+ *      Value of PKIX_Int32 used to set the criterion
+ *      (or -1 to disable the criterion).
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Not Thread Safe - assumes exclusive access to "params"
+ *  (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_SetBasicConstraints(
+        PKIX_ComCertSelParams *params,
+        PKIX_Int32 minPathLength,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_GetCertificate
+ * DESCRIPTION:
+ *
+ *  Retrieves a pointer to the Cert (if any) representing the certificate
+ *  criterion that is set in the ComCertSelParams object pointed to by
+ *  "params" and stores it at "pCert". In order to match against this
+ *  criterion, a certificate must be equal to the criterion's certificate. If
+ *  this criterion is specified, it is usually not necessary to specify any
+ *  other criteria, since this criterion requires an exact certificate match.
+ *
+ *  If "params" does not have this criterion set, this function stores NULL at
+ *  "pCert", in which case all certificates are considered to match this
+ *  criterion.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose certificate criterion
+ *      (if any) is to be stored. Must be non-NULL.
+ *  "pCert"
+ *      Address where object pointer will be stored. Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Conditionally Thread Safe
+ *      (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_GetCertificate(
+        PKIX_ComCertSelParams *params,
+        PKIX_PL_Cert **pCert,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_SetCertificate
+ * DESCRIPTION:
+ *
+ *  Sets the certificate criterion of the ComCertSelParams object pointed to by
+ * "params" using a Cert pointed to by "cert". In order to match against this
+ *  criterion, a certificate must be equal to the criterion's certificate.
+ *  If this criterion is specified, it is usually not necessary to specify
+ *  any other criteria, since this criterion requires an exact certificate
+ *  match.
+ *
+ *  If "cert" is NULL, all certificates are considered to match this criterion.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose certificate criterion is to be
+ *      set. Must be non-NULL.
+ *  "cert"
+ *      Address of Cert used to set the criterion
+ *      (or NULL to disable the criterion).
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Not Thread Safe - assumes exclusive access to "params"
+ *  (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_SetCertificate(
+        PKIX_ComCertSelParams *params,
+        PKIX_PL_Cert *cert,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_GetCertificateValid
+ * DESCRIPTION:
+ *
+ *  Retrieves a pointer to the Date (if any) representing the certificate
+ *  validity criterion that is set in the ComCertSelParams object pointed to by
+ *  "params" and stores it at "pDate". In order to match against this
+ *  criterion, a certificate's validity period must include the criterion's
+ *  Date.
+ *
+ *  If "params" does not have this criterion set, this function stores NULL at
+ *  "pDate", in which case all certificates are considered to match this
+ *  criterion.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose certificate validity criterion
+ *      (if any) is to be stored. Must be non-NULL.
+ *  "pDate"
+ *      Address where object pointer will be stored. Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Conditionally Thread Safe
+ *      (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_GetCertificateValid(
+        PKIX_ComCertSelParams *params,
+        PKIX_PL_Date **pDate,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_SetCertificateValid
+ * DESCRIPTION:
+ *
+ *  Sets the certificate validity criterion of the ComCertSelParams object
+ *  pointed to by "params" using a Date pointed to by "date". In order to
+ *  match against this criterion, a certificate's validity period must include
+ *  the criterion's Date.
+ *
+ *  If "date" is NULL, all certificates are considered to match this criterion.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose certificate validity criterion
+ *      is to be set. Must be non-NULL.
+ *  "date"
+ *      Address of Date used to set the criterion
+ *      (or NULL to disable the criterion).
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Not Thread Safe - assumes exclusive access to "params"
+ *  (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_SetCertificateValid(
+        PKIX_ComCertSelParams *params,
+        PKIX_PL_Date *date,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_GetSerialNumber
+ * DESCRIPTION:
+ *
+ *  Retrieves a pointer to the BigInt (if any) representing the serial number
+ *  criterion that is set in the ComCertSelParams object pointed to by
+ *  "params" and stores it at "pSerialNumber". In order to match against this
+ *  criterion, a certificate must have a serial number equal to the
+ *  criterion's serial number.
+ *
+ *  If "params" does not have this criterion set, this function stores NULL at
+ *  "pSerialNumber", in which case all certificates are considered to match
+ *  this criterion.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose serial number criterion
+ *      (if any) is to be stored. Must be non-NULL.
+ *  "pSerialNumber"
+ *      Address where object pointer will be stored. Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Conditionally Thread Safe
+ *      (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_GetSerialNumber(
+        PKIX_ComCertSelParams *params,
+        PKIX_PL_BigInt **pSerialNumber,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_SetSerialNumber
+ * DESCRIPTION:
+ *
+ *  Sets the serial number criterion of the ComCertSelParams object pointed to
+ *  by "params" using a BigInt pointed to by "serialNumber". In order to match
+ *  against this criterion, a certificate must have a serial number equal to
+ *  the criterion's serial number.
+ *
+ *  If "serialNumber" is NULL, all certificates are considered to match this
+ *  criterion.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose serial number criterion is to
+ *      be set. Must be non-NULL.
+ *  "serialNumber"
+ *      Address of BigInt used to set the criterion
+ *      (or NULL to disable the criterion).
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Not Thread Safe - assumes exclusive access to "params"
+ *  (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_SetSerialNumber(
+        PKIX_ComCertSelParams *params,
+        PKIX_PL_BigInt *serialNumber,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_GetVersion
+ * DESCRIPTION:
+ *
+ *  Retrieves a PKIX_UInt32 (if any) representing the version criterion that is
+ *  set in the ComCertSelParams object pointed to by "params" and stores it at
+ *  "pVersion". In order to match against this criterion, a certificate's
+ *  version must be equal to the criterion's version.
+ *
+ *  The version number will either be 0, 1, or 2 (corresponding to
+ *  v1, v2, or v3, respectively).
+ *
+ *  If "params" does not have this criterion set, this function stores
+ *  0xFFFFFFFF at "pVersion", in which case all certificates are considered
+ *  to match this criterion.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose version criterion (if any) is
+ *      to be stored. Must be non-NULL.
+ *  "pVersion"
+ *      Address where PKIX_Int32 will be stored. Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Conditionally Thread Safe
+ *      (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_GetVersion(
+        PKIX_ComCertSelParams *params,
+        PKIX_UInt32 *pVersion,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_SetVersion
+ * DESCRIPTION:
+ *
+ *  Sets the version criterion of the ComCertSelParams object pointed to by
+ *  "params" using the integer value of "version". In order to match against
+ *  this criterion, a certificate's version must be equal to the criterion's
+ *  version. If the criterion's version is -1, no version check is done and
+ *  all certificates are considered to match this criterion.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose version criterion is to be
+ *      set. Must be non-NULL.
+ *  "version"
+ *      Value of PKIX_Int32 used to set the criterion
+ *      (or -1 to disable the criterion).
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Not Thread Safe - assumes exclusive access to "params"
+ *  (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_SetVersion(
+        PKIX_ComCertSelParams *params,
+        PKIX_Int32 version,
+        void *plContext);
+
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_GetKeyUsage
+ * DESCRIPTION:
+ *
+ *  Retrieves a PKIX_UInt32 (if any) representing the key usage criterion that
+ *  is set in the ComCertSelParams object pointed to by "params" and stores it
+ *  at "pKeyUsage". In order to match against this criterion, a certificate
+ *  must allow the criterion's key usage values. Note that a certificate that
+ *  has no KeyUsage extension implicity allows all key usages. Note also that
+ *  this functions supports a maximum of 32 key usage bits.
+ *
+ *  If "params" does not have this criterion set, this function stores zero at
+ *  "pKeyUsage", in which case all certificates are considered to match this
+ *  criterion.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose key usage criterion (if any)
+ *      is to be stored. Must be non-NULL.
+ *  "pKeyUsage"
+ *      Address where PKIX_UInt32 will be stored. Must not be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Conditionally Thread Safe
+ *      (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_GetKeyUsage(
+        PKIX_ComCertSelParams *params,
+        PKIX_UInt32 *pKeyUsage,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_SetKeyUsage
+ * DESCRIPTION:
+ *
+ *  Sets the key usage criterion of the ComCertSelParams object pointed to by
+ *  "params" using the integer value of "keyUsage". In order to match against
+ *  this criterion, a certificate must allow the criterion's key usage values.
+ *  Note that a certificate that has no KeyUsage extension implicity allows
+ *  all key usages. Note also that this functions supports a maximum of 32 key
+ *  usage bits.
+ *
+ *  If the criterion's key usage value is zero, no key usage check is done and
+ *  all certificates are considered to match this criterion.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose key usage criterion is to be
+ *      set. Must be non-NULL.
+ *  "keyUsage"
+ *      Value of PKIX_Int32 used to set the criterion
+ *      (or zero to disable the criterion).
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Not Thread Safe - assumes exclusive access to "params"
+ *  (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_SetKeyUsage(
+        PKIX_ComCertSelParams *params,
+        PKIX_UInt32 keyUsage,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_GetExtendedKeyUsage
+ * DESCRIPTION:
+ *
+ *  Retrieves a pointer to the List of OIDs (if any) representing the extended
+ *  key usage criterion that is set in the ComCertSelParams object pointed to
+ *  by "params" and stores it at "pExtKeyUsage". In order to match against this
+ *  criterion, a certificate's ExtendedKeyUsage extension must allow the
+ *  criterion's extended key usages. Note that a certificate that has no
+ *  ExtendedKeyUsage extension implicity allows all key purposes.
+ *
+ *  If "params" does not have this criterion set, this function stores NULL at
+ *  "pExtKeyUsage", in which case all certificates are considered to match
+ *  this criterion.
+ *
+ *  Note that the List returned by this function is immutable.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose extended key usage criterion
+ *      (if any) is to be stored. Must be non-NULL.
+ *  "pExtKeyUsage"
+ *      Address where object pointer will be stored. Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Conditionally Thread Safe
+ *      (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_GetExtendedKeyUsage(
+        PKIX_ComCertSelParams *params,
+        PKIX_List **pExtKeyUsage, /* list of PKIX_PL_OID */
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_SetExtendedKeyUsage
+ * DESCRIPTION:
+ *
+ *  Sets the extended key usage criterion of the ComCertSelParams object
+ *  pointed to by "params" using a List of OIDs pointed to by "extKeyUsage".
+ *  In order to match against this criterion, a certificate's ExtendedKeyUsage
+ *  extension must allow the criterion's extended key usages. Note that a
+ *  certificate that has no ExtendedKeyUsage extension implicitly allows all
+ *  key purposes.
+ *
+ *  If "extKeyUsage" is NULL, all certificates are considered to match this
+ *  criterion.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose extended key usage criterion
+ *      is to be set. Must be non-NULL.
+ *  "extKeyUsage"
+ *      Address of List of OIDs used to set the criterion
+ *      (or NULL to disable the criterion).
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Not Thread Safe - assumes exclusive access to "params"
+ *  (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_SetExtendedKeyUsage(
+        PKIX_ComCertSelParams *params,
+        PKIX_List *extKeyUsage,  /* list of PKIX_PL_OID */
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_GetPolicy
+ * DESCRIPTION:
+ *
+ *  Retrieves a pointer to the List of OIDs (if any) representing the policy
+ *  criterion that is set in the ComCertSelParams object pointed to by
+ *  "params" and stores it at "pPolicy". In order to match against this
+ *  criterion, a certificate's CertificatePolicies extension must include at
+ *  least one of the criterion's policies. If "params" has this criterion set,
+ *  but the List of OIDs is empty, then a certificate's CertificatePolicies
+ *  extension must include at least some policy.
+ *
+ *  If "params" does not have this criterion set, this function stores NULL at
+ *  "pPolicy", in which case all certificates are considered to match this
+ *  criterion.
+ *
+ *  Note that the List returned by this function is immutable.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose policy criterion (if any) is
+ *      to be stored. Must be non-NULL.
+ *  "pPolicy"
+ *      Address where object pointer will be stored. Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Conditionally Thread Safe
+ *      (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_GetPolicy(
+        PKIX_ComCertSelParams *params,
+        PKIX_List **pPolicy,  /* list of PKIX_PL_OID */
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_SetPolicy
+ * DESCRIPTION:
+ *
+ *  Sets the policy criterion of the ComCertSelParams object pointed to by
+ *  "params" using a List of OIDs pointed to by "policy". In order to match
+ *  against this criterion, a certificate's CertificatePolicies extension must
+ *  include at least one of the criterion's policies. If "params" has this
+ *  criterion set, but the List of OIDs is empty, then a certificate's
+ *  CertificatePolicies extension must include at least some policy.
+ *
+ *  If "policy" is NULL, all certificates are considered to match this
+ *  criterion.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose policy criterion is to be set.
+ *      Must be non-NULL.
+ *  "policy"
+ *      Address of List of OIDs used to set the criterion
+ *      (or NULL to disable the criterion).
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Not Thread Safe - assumes exclusive access to "params"
+ *  (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_SetPolicy(
+        PKIX_ComCertSelParams *params,
+        PKIX_List *policy,    /* list of PKIX_PL_OID */
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_GetIssuer
+ * DESCRIPTION:
+ *
+ *  Retrieves a pointer to the X500Name (if any) representing the issuer
+ *  criterion that is set in the ComCertSelParams object pointed to by
+ *  "params" and stores it at "pIssuer". In order to match against this
+ *  criterion, a certificate's IssuerName must match the criterion's issuer
+ *  name.
+ *
+ *  If "params" does not have this criterion set, this function stores NULL at
+ *  "pIssuer", in which case all certificates are considered to match this
+ *  criterion.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose issuer criterion (if any) is
+ *      to be stored. Must be non-NULL.
+ *  "pIssuer"
+ *      Address where object pointer will be stored. Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Conditionally Thread Safe
+ *      (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_GetIssuer(
+        PKIX_ComCertSelParams *params,
+        PKIX_PL_X500Name **pIssuer,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_SetIssuer
+ * DESCRIPTION:
+ *
+ *  Sets the issuer criterion of the ComCertSelParams object pointed to by
+ *  "params" using an X500Name pointed to by "issuer". In order to match
+ *  against this criterion, a certificate's IssuerName must match the
+ *  criterion's issuer name.
+ *
+ *  If "issuer" is NULL, all certificates are considered to match this
+ *  criterion.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose issuer criterion is to be set.
+ *      Must be non-NULL.
+ *  "issuer"
+ *      Address of X500Name used to set the criterion
+ *      (or NULL to disable the criterion).
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Not Thread Safe - assumes exclusive access to "params"
+ *  (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_SetIssuer(
+        PKIX_ComCertSelParams *params,
+        PKIX_PL_X500Name *issuer,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_GetSubject
+ * DESCRIPTION:
+ *
+ *  Retrieves a pointer to the X500Name (if any) representing the subject
+ *  criterion that is set in the ComCertSelParams object pointed to by
+ *  "params" and stores it at "pSubject". In order to match against this
+ *  criterion, a certificate's SubjectName must match the criterion's subject
+ *  name.
+ *
+ *  If "params" does not have this criterion set, this function stores NULL at
+ *  "pSubject", in which case all certificates are considered to match this
+ *  criterion.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose subject criterion (if any) is
+ *      to be stored. Must be non-NULL.
+ *  "pSubject"
+ *      Address where object pointer will be stored. Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Conditionally Thread Safe
+ *      (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_GetSubject(
+        PKIX_ComCertSelParams *params,
+        PKIX_PL_X500Name **pSubject,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_SetSubject
+ * DESCRIPTION:
+ *
+ *  Sets the subject criterion of the ComCertSelParams object pointed to by
+ *  "params" using an X500Name pointed to by "subject". In order to match
+ *  against this criterion, a certificate's SubjectName must match the
+ *  criterion's subject name.
+ *
+ *  If "subject" is NULL, all certificates are considered to match this
+ *  criterion.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose subject criterion is to be
+ *      set. Must be non-NULL.
+ *  "subject"
+ *      Address of X500Name used to set the criterion
+ *      (or NULL to disable the criterion).
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Not Thread Safe - assumes exclusive access to "params"
+ *  (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_SetSubject(
+        PKIX_ComCertSelParams *params,
+        PKIX_PL_X500Name *subject,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_GetSubjectAsByteArray
+ * DESCRIPTION:
+ *
+ *  Retrieves a pointer to the ByteArray (if any) representing the subject
+ *  criterion that is set in the ComCertSelParams object pointed to by
+ *  "params" and stores it at "pSubject". In order to match against this
+ *  criterion, a certificate's SubjectName must match the criterion's subject
+ *  name.
+ *
+ *  If "params" does not have this criterion set, this function stores NULL at
+ *  "pSubject", in which case all certificates are considered to match this
+ *  criterion.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose subject criterion (if any) is
+ *      to be stored. Must be non-NULL.
+ *  "pSubject"
+ *      Address where object pointer will be stored. Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Conditionally Thread Safe
+ *      (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_GetSubjectAsByteArray(
+        PKIX_ComCertSelParams *params,
+        PKIX_PL_ByteArray **pSubject,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_SetSubjectAsByteArray
+ * DESCRIPTION:
+ *
+ *  Sets the subject criterion of the ComCertSelParams object pointed to by
+ *  "params" using a ByteArray pointed to by "subject". In order to match
+ *  against this criterion, a certificate's SubjectName must match the
+ *  criterion's subject name.
+ *
+ *  If "subject" is NULL, all certificates are considered to match this
+ *  criterion.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose subject criterion is to be
+ *      set. Must be non-NULL.
+ *  "subject"
+ *      Address of ByteArray used to set the criterion
+ *      (or NULL to disable the criterion).
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Not Thread Safe - assumes exclusive access to "params"
+ *  (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_SetSubjectAsByteArray(
+        PKIX_ComCertSelParams *params,
+        PKIX_PL_ByteArray *subject,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_GetNameConstraints
+ * DESCRIPTION:
+ *
+ *  Retrieves a pointer to the X500Name (if any) representing the name
+ *  constraints criterion that is set in the ComCertSelParams object pointed
+ *  to by "params" and stores it at "pConstraints". In order to match against
+ *  this criterion, a certificate's subject and subject alternative names must
+ *  be allowed by the criterion's name constraints.
+ *
+ *  If "params" does not have this criterion set, this function stores NULL at
+ *  "pConstraints", in which case all certificates are considered to match
+ *  this criterion.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose name constraints criterion
+ *      (if any) is to be stored. Must be non-NULL.
+ *  "pConstraints"
+ *      Address where object pointer will be stored. Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Conditionally Thread Safe
+ *      (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_GetNameConstraints(
+        PKIX_ComCertSelParams *params,
+        PKIX_PL_CertNameConstraints **pConstraints,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_SetNameConstraints
+ * DESCRIPTION:
+ *
+ *  Sets the name constraints criterion of the ComCertSelParams object pointed
+ *  to by "params" using the CertNameConstraints pointed to by "constraints".
+ *  In order to match against this criterion, a certificate's subject and
+ *  subject alternative names must be allowed by the criterion's name
+ *  constraints.
+ *
+ *  If "constraints" is NULL, all certificates are considered to match this
+ *  criterion.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose name constraints criterion is
+ *      to be set. Must be non-NULL.
+ *  "constraints"
+ *      Address of CertNameConstraints used to set the criterion
+ *      (or NULL to disable the criterion).
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Not Thread Safe - assumes exclusive access to "params"
+ *  (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_SetNameConstraints(
+        PKIX_ComCertSelParams *params,
+        PKIX_PL_CertNameConstraints *constraints,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_GetMatchAllSubjAltNames
+ * DESCRIPTION:
+ *
+ *  Checks whether the ComCertSelParams object pointed to by "params" indicate
+ *  that all subject alternative names are to be matched and stores the Boolean
+ *  result at "pMatch". This Boolean value determines the behavior of the
+ *  subject alternative names criterion.
+ *
+ *  In order to match against the subject alternative names criterion, if the
+ *  Boolean value at "pMatch" is PKIX_TRUE, a certificate must contain all of
+ *  the criterion's subject alternative names. If the Boolean value at
+ *  "pMatch" is PKIX_FALSE, a certificate must contain at least one of the
+ *  criterion's subject alternative names. The default behavior is as if the
+ *  Boolean value at "pMatch" is PKIX_TRUE.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object used to determine whether all
+ *      subject alternative names must be matched. Must be non-NULL.
+ *  "pMatch"
+ *      Address where object pointer will be stored. Must be non-NULL.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Conditionally Thread Safe
+ *      (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_GetMatchAllSubjAltNames(
+        PKIX_ComCertSelParams *params,
+        PKIX_Boolean *pMatch,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_SetMatchAllSubjAltNames
+ * DESCRIPTION:
+ *
+ *  Sets the match flag of the ComCertSelParams object pointed to by "params"
+ *  using the Boolean value of "match". This Boolean value determines the
+ *  behavior of the subject alternative names criterion.
+ *
+ *  In order to match against the subject alternative names criterion, if the
+ *  "match" is PKIX_TRUE, a certificate must contain all of the criterion's
+ *  subject alternative names. If the "match" is PKIX_FALSE, a certificate
+ *  must contain at least one of the criterion's subject alternative names.
+ *  The default behavior is as if "match" is PKIX_TRUE.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose match flag is to be set.
+ *      Must be non-NULL.
+ *  "match"
+ *      Boolean value used to set the match flag.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Not Thread Safe - assumes exclusive access to "params"
+ *  (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_SetMatchAllSubjAltNames(
+        PKIX_ComCertSelParams *params,
+        PKIX_Boolean match,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_GetLeafCertFlag
+ * DESCRIPTION:
+ *
+ * Return "leafCert" flag of the ComCertSelParams structure. If set to true,
+ * the flag indicates that a selector should filter out all cert that are not
+ * qualified to be a leaf cert according to the specified key/ekey usages.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object used to determine whether all
+ *      subject alternative names must be matched. Must be non-NULL.
+ *  "pLeafFlag"
+ *      Address of returned value.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Conditionally Thread Safe
+ *      (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error*
+PKIX_ComCertSelParams_GetLeafCertFlag(
+        PKIX_ComCertSelParams *params,
+        PKIX_Boolean *pLeafFlag,
+        void *plContext);
+
+/*
+ * FUNCTION: PKIX_ComCertSelParams_SetLeafCertFlag
+ * DESCRIPTION:
+ *
+ * Sets a flag that if its value is true, indicates that the selector
+ * should only pick certs that qualifies to be leaf for this cert path
+ * validation.
+ *
+ * PARAMETERS:
+ *  "params"
+ *      Address of ComCertSelParams object whose match flag is to be set.
+ *      Must be non-NULL.
+ *  "leafFlag"
+ *      Boolean value used to set the leaf flag.
+ *  "plContext"
+ *      Platform-specific context pointer.
+ * THREAD SAFETY:
+ *  Not Thread Safe - assumes exclusive access to "params"
+ *  (see Thread Safety Definitions in Programmer's Guide)
+ * RETURNS:
+ *  Returns NULL if the function succeeds.
+ *  Returns a CertSelector Error if the function fails in a non-fatal way.
+ *  Returns a Fatal Error if the function fails in an unrecoverable way.
+ */
+PKIX_Error *
+PKIX_ComCertSelParams_SetLeafCertFlag(
+        PKIX_ComCertSelParams *params,
+        PKIX_Boolean leafFlag,
+        void *plContext);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _PKIX_CERTSEL_H */
Property changes on: nss/mozilla/security/nss/lib/libpkix/include/pkix_certsel.h
___________________________________________________________________
Added: svn:executable
   + *
Added: svn:eol-style
   + LF