| Index: third_party/v4l-utils/ChangeLog
|
| diff --git a/third_party/v4l-utils/ChangeLog b/third_party/v4l-utils/ChangeLog
|
| new file mode 100644
|
| index 0000000000000000000000000000000000000000..d0aa598ac41b5a523c8f7507c92940f96f1be1a7
|
| --- /dev/null
|
| +++ b/third_party/v4l-utils/ChangeLog
|
| @@ -0,0 +1,1815 @@
|
| +v4l-utils-1.6.0
|
| +---------------
|
| +
|
| +Gregor Jasny (5):
|
| + man: Fix typo in dvb-fe-tool man page
|
| + man: Replace hyphen with minus sign
|
| + man: place escape to correct position
|
| + man: Use Unicode character for ellipsis and fall back to ...
|
| + qv4l2: Add keywords to desktop file
|
| +
|
| +
|
| +v4l-utils-1.5.91 (Development snapshot)
|
| +---------------------------------------
|
| +
|
| +Gregor Jasny (3):
|
| + Start v4l-utils 1.5.91 development cycle
|
| + libdvbv5: Remove left over include of desc_service_list.h
|
| + libdvbv5: Fix typo in doxygen index file
|
| +
|
| +Mauro Carvalho Chehab (30):
|
| + dvb-file: Fix a memory leak
|
| + dvb-file: frees channel/vchannel if service id not found
|
| + dvb-file: Remove spaces at the beginning of channel name
|
| + dvb-file: Only print SDT warning if are there any channel to be stored
|
| + dvb-file: Fix channel name when SDT is not found
|
| + libdvbv5/descriptors: Fix content hexdump
|
| + libdvbv5: Fix the number of frequencies at ISDB-T delivery sys descriptor
|
| + libdvbv5: print ISDB-T frequencies in MHz
|
| + libdvbv5: add a parser for ISO-10646/UCS2 strings
|
| + libdvbv5: Fix ISDB-T TS info descriptor
|
| + dvb-file: Fix no-SDT channel name allocation
|
| + dvb-file: fix the memory deallocation on error
|
| + dvb-file: don't dereference a NULL pointer
|
| + libdvbv5: check for alloc errors at desc_ca
|
| + dvb-format-convert: make valgrind happy
|
| + libdvbv5: fix a nasty to track double-free bug
|
| + dvb-fe-tool: abort nicely on femon mode
|
| + libdvbv5: replace @include by @example
|
| + man: move dvb-scan.1 out of Doxygen
|
| + man: move dvb-fe-tool.1 out of Doxygen
|
| + dvb-format-convert: Fix help message
|
| + man: move dvb-format-convert.1 out of Doxygen
|
| + man: add a utils/dvb/dvbv5-zap.1 page and remove from doxygen
|
| + user man pages: Change report bugs to linux media ML
|
| + Revert "dvb-file: don't dereference a NULL pointer"
|
| + libdvbv5: Fix frequency table alloc size at desc_frequency_list
|
| + .gitignore: Ignore quilt patches/ dir
|
| + dvbv5-scan: add vdr format for the --help parameter
|
| + user man pages: Add version to the man pages
|
| +
|
| +
|
| +v4l-utils-1.5.90 (Development snapshot)
|
| +---------------------------------------
|
| +
|
| +André Roth (7):
|
| + libdvbv5: cleanup logging, some memory checks
|
| + libdvbv5: fix satellite LNBf handling
|
| + libdvbv5: fix dvb_fe_dummy()
|
| + libdvbv5: MPEG ES parser documentation
|
| + libdvbv5: use hyperlinks in doxygen PDF
|
| + libdvbv5: MPEG TS parser documentation
|
| + libdvbv5: MPEG TS parser documentation and cleanups
|
| +
|
| +Gregor Jasny (5):
|
| + Start v4l-utils 1.5.0 development cycle
|
| + buildsystem: Use latest ax_prog_doxygen from GNU Autoconf Archive
|
| + libdvbv5: Add todo file
|
| + libdvbv5: remove service_location descriptor
|
| + libdvbv5: remove service_list descriptor
|
| + doxygen: distribute doc/libdvbv5-index.doc in tarball
|
| +
|
| +Hans Verkuil (9):
|
| + v4l2-compliance: fix buffer state test
|
| + (c)v4l-helpers: zero bytesperline, swap arg order
|
| + qv4l2: the helper now zeroes bytesperline
|
| + cv4l-helpers: add missing ioctls
|
| + v4l2-ctl: fix control support for old kernels.
|
| + v4l-helpers.h: fix control ioctls checks
|
| + qv4l2: init dest format when starting vbi/swradio streaming
|
| + v4l2-compliance: fix valgrind warnings
|
| + qv4l2: fix typo: 576 instead of 575
|
| +
|
| +Hans de Goede (3):
|
| + libv4l2: Fix restoring of original dest-fmt after a VIDIOC_S_DV_TIMING
|
| + libv4l2: Set convert_mmap_frame_size as soon as we've a dest_fmt
|
| + libv4l2: Move alignment of dest_fmt resolution to v4l2_set_src_and_dest_format
|
| +
|
| +Mauro Carvalho Chehab (60):
|
| + libdvbv5: add doxygen tags for header.h
|
| + libdvbv5: add doxygen tags to vct.h
|
| + libdvbv5: add doxygen tags to pat.h
|
| + doxygen_libdvbv5.cfg: add header.h, vct.h and pat.h
|
| + libdvbv5: fix some cut-and-paste errors at documentation
|
| + libdvbv5: add doxygen tags to pmt.h
|
| + libdvbv5: better comment the descriptors
|
| + libdvbv5: fix some issues at PAT documentation
|
| + libdvbv5: add documentation for sdt.h
|
| + libdvbv5: some documentation fixups for sdt.h
|
| + libdvbv5: add documentation for the NIT table parser
|
| + libdvbv5: add documentation for crc32.h
|
| + libdvbv5: Add documentation for EIT DVB parser
|
| + libdvbv5: Add a mainpage to the documentation
|
| + libdvbv5: add documentation for ATSC EIT.
|
| + libdvbv5: don't use ATSC_HEADER() macro
|
| + libdvbv5: don't use DVB_DESC_HEADER() macro
|
| + libdvbv5: add documentation for cat.h and atsc_header.h
|
| + libdvbv5: add support for mgt.h
|
| + libdvbv5 documentation review
|
| + libdvbv5: group documentation into modules
|
| + libdvbv5: add a missing macro to dvb_table group for documentation
|
| + doxygen: add dvbv5-tools to the documentation
|
| + dvb-fe-tool: Fix verbosity and comment unused option
|
| + libdvbv5: fix a typo at ASTRA 1E extended LNBf
|
| + Add support for VDR format (only for output)
|
| + libdvbv5: Add support for opening FE on read only mode
|
| + dvb-fe-tool: add support to open DVB FE in read only mode
|
| + libdvbv5: Don't double-free the file name
|
| + dvb-fe-tool: add femon parameter
|
| + libdvbv5: fix a nasty bug when printing stats
|
| + libdvbv5: Re-add the status name at the stats report
|
| + libdvbv5: export dvb_fe_retrieve_quality()
|
| + dvb-fe-tool: Colorize the status report
|
| + dvb-fe-tool: implement acoustic mode
|
| + update dvb-fe-tool Doxygen documentation
|
| + libdvbv5: revert an ABI breakage
|
| + libdvbv5: Create doxygen docs for mpeg_es.h
|
| + libdvbv5: add documentation for ATSC service location
|
| + libdvbv5: Add documentation for CA descriptor
|
| + libdvbv5: Add documentation for CA identifier descriptor
|
| + libdvbv5: add documentation for cable delivery system descriptor
|
| + libdvbv5: add documentation for the extended event descriptor
|
| + libdvbv5: add documentation for the short event descriptor
|
| + libdvbv5: add documentation for the extended descriptor
|
| + libdvbv5: add documentation for the frequency list descriptor
|
| + libdvbv5: Document the hierarchy descriptor
|
| + libdvbv5: Add documentation for ISDB-T terrestrial descriptor
|
| + libdvbv5: add documentation for the language descriptor
|
| + libdvbv5: Add description for the LCN descriptor
|
| + libdvbv5: add documentation for the network name descriptor
|
| + libdvbv5: add documentation for ISDB partial reception descriptor
|
| + libdvbv5: document the Satellite delivery system descriptor
|
| + libdvbv5: add documentation for the service descriptor
|
| + libdvbv5: Add documentation for desc_service_list.h
|
| + libdvbv5: add documentation for the T2 delivery system descriptor
|
| + libdvbv5: documents the terrestrial delivery system descriptor
|
| + libdvbv5: Documents ISDB TS information descriptor
|
| + libdvbv5: add javadoc markups for desc_service_location.h
|
| + dvb-file: Fix a core dump issue
|
| +
|
| +
|
| +v4l-utils-1.4.0
|
| +---------------
|
| +
|
| +Gregor Jasny (11):
|
| + Start v4l-utils 1.3.91 development cycle
|
| + libdvbv5: Remove dvbsat_polarization_name (same as dvb_sat_pol_name)
|
| + libdvbv5: Rename and hide charset definitions
|
| + libdvbv5: Hide unused and unexposed cnr_to_qual_s tables
|
| + libdvbv5: Make dummy_fe static
|
| + libdvbv5: Add doxygen config file to distribution list
|
| + libdvbv5: Add dvb-fe-priv.h to sources list
|
| + contrib: Add au0828 directory to extra distribution list
|
| + media-ctl: process pkgconfig files
|
| + v4l2-ctl: Distribute vivid-tpg.h.patch
|
| + ir-keytable: Genrate stable map file by sorting directory before parsing
|
| +
|
| +Hans Verkuil (6):
|
| + v4l2-compliance: require G/S_PRIORITY support for m2m devices
|
| + v4l2-ctl/qv4l2: sync to latest vivid-tpg code
|
| + v4l-utils: sync-with-kernel
|
| + Add the generated lib/include/dvb-frontend.h to .gitignore
|
| + Copy the vivid-tpg* sources from the kernel
|
| + qv4l2: fix bug in setting the audio mode
|
| +
|
| +Mauro Carvalho Chehab (72):
|
| + libdvbv5: be coherent with parse_string.h header
|
| + libdvbv5: Move charsets to be inside the parms struct
|
| + libdvbv5: move internal parameters to a separate structure
|
| + libdvbv5: Properly document struct dvb_v5_fe_parms
|
| + libdvbv5: Fix parameters dvb_add_parms_for_sys()
|
| + libdvbv5: Fix return values for dvb_fe_get_event()
|
| + libdvbv5: Add documentation for dvb-fe.h
|
| + libdvbv5: add the private structure to the tree
|
| + libdvbv5: Rename internally-defined poll function as dvb_poll
|
| + libdvbv5: fix a memory leak at descriptors
|
| + libdvbv5: reimplement the spaces filling logic
|
| + libdvbv5: Don't go past the size of dvb_v5_name
|
| + libdvbv5: Don't go past the size of dvb_v5_attr_names
|
| + libdvbv5: Fix changeset 04accf23
|
| + libdvbv5: Allocate channel earlier
|
| + libdvbv5: add a missing return
|
| + dvbv5-zap: close dvr_fd at the end of do_traffic_monitor()
|
| + libdvbv5: Improve parsing of dvb channel format
|
| + libdvbv5: add support for parsing scan-s2 DVB-S2 channels
|
| + libdvbv5: don't write polarization and user parms twice
|
| + libdvbv5: Fix modulation formats for legacy channel on DVB-S2
|
| + libdvbv5: only use emulated formats if the original one is not found
|
| + libdvbv5: remove some commented dead code
|
| + libdvbv5: add support for optional parameters on oneline formats
|
| + libdvbv5: add support for optional MIS parameter
|
| + libdvbv5: Add support for parsing DVB-T2 channel format
|
| + libdvbv5: Fix delivery system for channel on DVB-T2 format
|
| + Stop using the legacy name for PLP/MIS property
|
| + libdvbv5: fix parsing of the default_value
|
| + libdvbv5: Split libdvbv5 properties from stats
|
| + libdvbv5: better document dvb-v5-std.h
|
| + libdvbv5: Add MIS to DVB-S2 properties
|
| + libdvbv5: Fix the error message when a props is not found
|
| + libdvbv5: avoid checking past data
|
| + libdvbv5: use default values if an entry is missing
|
| + libdvbv5: MIS default should be zero
|
| + libdvbv5: add support for PLS code/mode for file read/write
|
| + libdvbv5: make sure that all needed properties are filled
|
| + libdvbv5: Fix the property limits check
|
| + libdvbv5: fix a corner case reported by Coverity
|
| + dvbv5-zap: keep monitoring stats at DVB record mode
|
| + dvbv5-zap: Be sure to get stats before printing
|
| + dvbv5-zap: remove an unused var
|
| + libdvbv5: add documentation for dvb-demux.h
|
| + libdvbv5: rename struct el_pid
|
| + libdvbv5: Add a description for DVB file entries
|
| + dvb-file.h: prepend parsing structs with "dvb_"
|
| + libdvbv5: rename enum file_formats to dvb_file_formats
|
| + libdvbv5: move PTABLE macro to the *.c files
|
| + libdvbv5: add documentation about format read/write functions
|
| + libdvbv5: Add documentation for other functions at dvb-file.h
|
| + libdvbv5: Document dvb-log.h and dvb-sat.h
|
| + libdvbv5: Remove an unused parameter at struct dvb_v5_descriptors
|
| + libdvbv5: remove unused parameter at dvb_scan_alloc_handler_table()
|
| + libdvbv5: add documentation for the DVB scan functions
|
| + libdvbv5: Document the libdvbv5 properties
|
| + libdvbv5: Document the last undocumented structs at dvb-file.h
|
| + libdvbv5: Convert documentation to javadoc format
|
| + Add support to generate Doxygen documentation for libdvbv5
|
| + libdvbv5: Improve doxygen format
|
| + Ignore the generate doxygen-doc directory
|
| + libdvbv5: Fix function definitions at doxygen book
|
| + libdvbv5: Properly document macros at dvb-v5-std.h
|
| + libdvbv5: fix dvb_get_pmt_pid API
|
| + libdvbv5: improve doxygen documentation
|
| + libdvbv5 doxygen: Fix a few file descriptions
|
| + libdvbv5: Fix dvb_get_pmt_pid()
|
| + libdvbv5: Provide a quality indicator for DVB-T
|
| + libdvbv5: get rid of bcd_to_int()
|
| + libdvbv5: add documentation for descriptors.h
|
| + libdvbv5: Add more data about the descriptors definition
|
| + libdvbv5 doxygen: Some improvements for dvb-scan.h and descriptors.h
|
| +
|
| +
|
| +v4l-utils-1.3.90 (Development snapshot)
|
| +---------------------------------------
|
| +
|
| +André Roth (1):
|
| + libdvbv5: provide crc32 to c++
|
| +
|
| +Anton Arbring (20):
|
| + qv4l2: clarified two strings
|
| + qv4l2: changed and removed icons
|
| + qv4l2: correctly disable two menu items
|
| + qv4l2: added user controls
|
| + qv4l2: hiding disabled GUI items
|
| + qv4l2: alignment and size mods
|
| + qv4l2: added titles and moved settings
|
| + qv4l2: hiding disabled GUI items
|
| + qv4l2: alignment and size mods
|
| + qv4l2: added titles and moved settings
|
| + qv4l2: refactoring general-tab.cpp
|
| + qv4l2: bugfix and dynamic adjustments
|
| + qv4l2: removed colon and correct rowcount
|
| + qv4l2: added icon and moved label
|
| + qv4l2: added fullscreen functionality for capture window
|
| + qv4l2: added right click menu to capturewin
|
| + qv4l2: adding fullscreen option to toolbar main window
|
| + qv4l2: removed redundant set size
|
| + qv4l2: Removed bottom layout from capturewin
|
| + qv4l2: Adding width and height scaling to the status bar
|
| +
|
| +Gregor Jasny (8):
|
| + Start v4l-utils 1.3.x development
|
| + Revert "libdvbv5: Do not install libdvbv5 by default"
|
| + qv4l2: Fix typo
|
| + Fix kFreeBSD build
|
| + fixed BSDfication of V4L related headers
|
| + Disabled libdvbv5 and v4l-utils build
|
| + Hide parse_string.h content in shared library interface
|
| + Prefix exported functions with dvb_
|
| + libv4l2: Lazily allocate convert_mmap_buf
|
| + qv4l2: Clean up icon distribution list
|
| +
|
| +Hans Verkuil (133):
|
| + qv4l2: add extensive colorspace support
|
| + v4l2-compliance: improve colorspace checks.
|
| + qv4l2: colorspace & opengl improvements
|
| + qv4l2: GL_RED is not supported everywhere, use GL_LUMINANCE.
|
| + qv4l2: add a 'blending' mode to test images with an alpha channel.
|
| + qv4l2: fix pixel aspect ratio calculation
|
| + qv4l2: revert most of the previous patch
|
| + qv4l2: fix compilation error if HAVE_QTGL is undefined
|
| + qv4l2: fix control range handling and broken slider disabling.
|
| + qv4l2: fix pixel aspect handling and set compose rectangle
|
| + qv4l2: add support for crop and compose
|
| + qv4l2: implement SEQ_TB/BT support for the openGL renderer
|
| + qv4l2: remove two forgotten debug printfs
|
| + qv4l2: make the destination sizeimage large enough
|
| + libv4l-mplane: copy back v4l2_buffer.m, fix type problems
|
| + libv4l-mplane: v4l2-compliance fixes
|
| + libv4l-mplane: fix compile warning
|
| + qv4l2: fix incorrect disabling of the blending mode
|
| + qv4l2: zero initial buffers
|
| + qv4l2: fix enabling/disable frame width/height/size
|
| + qv4l2: get rid of unused v4l2 class methods.
|
| + qv4l2: improve video output support, esp. multiplanar.
|
| + qv4l2: improve pixel aspect detection
|
| + v4l2-ctl: vastly improve the test pattern generator.
|
| + v4l2-ctl: add missing source chromakey support.
|
| + v4l2-ctl: the alpha flags are mutually exclusive.
|
| + v4l2-ctl: add support for generating limited range RGB
|
| + qv4l2: fix a bug in vidFieldChanged
|
| + v4l2-ctl: missing support for continuous frameintervals.
|
| + Revert "qv4l2: added titles and moved settings"
|
| + Revert "qv4l2: alignment and size mods"
|
| + Revert "qv4l2: hiding disabled GUI items"
|
| + qv4l2: fix broken handling of V4L2_VBI_INTERLACED.
|
| + qv4l2: fix sliced vbi support
|
| + qv4l2: fix height calculation when overriding pixel aspect ratio
|
| + v4l2-compliance: fix various VBI tests.
|
| + qv4l2: fix square aspect ratio handling and improve Video Aspect Ratio
|
| + qv4l2: refactor window size setting at capture start
|
| + qv4l2: reset size after changing aspect ratios or scaling mode
|
| + qv4l2: drop setSizeAdjustPolicy(QComboBox::AdjustToContents)
|
| + libv4l2rds: fix date-time handling
|
| + qv4l2: fix coverity defect
|
| + qv4l2: make tab labels more compact.
|
| + qv4l2: better handling of string controls with a step > 1
|
| + libv4l2rds: handle V4L2_RDS_BLOCK_INVALID.
|
| + libv4l2rds: Area Coverage is only partially available for RBDS
|
| + rds-ctl: print RBDS call sign.
|
| + v4l2-compliance: fix control test
|
| + v4l2-compliance: only discrete framesizes are not allowed for output
|
| + libv4lconvert: add support for extended controls
|
| + libv4lcontrol: sync control strings/flags with the kernel
|
| + v4l2-compliance: allow frequency bands of just one frequency
|
| + qv4l2: fix a confusing error message when capturing VBI.
|
| + v4l2-compliance: improved v4l helpers header, add tracing
|
| + v4l2-compliance: add v4l2_format support to cv4l-helpers.h
|
| + v4l2-compliance: fix problems with vbi streaming.
|
| + qv4l2: always do updateVidCapFormat when changing crop/compose
|
| + qv4l2: m_useGLAct is only available if HAVE_QTGL is set.
|
| + qv4l2: add new png to the list of distributed files
|
| + qv4l2: use the new toolbutton for three buttons in the general tab
|
| + contrib/freebsd/Makefile.am: fix syntax error.
|
| + v4l-utils: update the headers to the latest kernel version.
|
| + v4l2-ctl: add support for the motion detection event
|
| + v4l2-ctl: add support for array controls
|
| + v4l2-ctl: allow setting/getting subsets
|
| + v4l-utils: add new V4L2_CAP_EXT_PIX_FORMAT capability
|
| + v4l2-compliance: check for the presence of V4L2_CAP_EXT_PIX_FORMAT
|
| + v4l2-ctl: add support for new extended format flags field.
|
| + v4l2-compliance: also check for V4L2_CAP_EXT_PIX_FORMAT in device_caps
|
| + qv4l2: add support for new alpha-aware pixelformats.
|
| + v4l2-ctl: add support for the new alpha-aware pixelformats.
|
| + libv4lconvert: add support for new pixelformats
|
| + v4l2-ctl: fix returned pixelformats that map to fbdev
|
| + qv4l2: bypass libv4l2 when obtaining the colorspace
|
| + qv4l2: fix a coverity defect
|
| + qv4l2: add the two new png's to the EXTRA_DIST list
|
| + v4l2-compliance: fix broken priv test
|
| + qv4l2: improve full-screen handling
|
| + qv4l2: center frame and drop margins in full screen mode
|
| + qv4l2: add Q shortcut to close the video window
|
| + qv4l2: QImage could be the wrong size
|
| + v4l2-compliance: reworked the (c)v4l-helpers.h headers
|
| + qv4l2: integrate with the cv4l-helpers.h header
|
| + qv4l2: force bytesperline recalculation when changing the width.
|
| + qv4l2: add Trace IOCTLs option
|
| + qv4l2: set the new value immediately when updating a control range.
|
| + qv4l2: correctly resubscribe events after a reopen.
|
| + qv4l2: add 'Use Record Priority' option
|
| + libv4lconvert: fix RGB32 conversion
|
| + qv4l2: use new control helpers
|
| + qv4l2: hopefully fix a i386 ubuntu build error
|
| + qv4l2: honor the fullscreen setting when starting capturing
|
| + qv4l2: bug fix in re-subscribing source change events
|
| + v4l-utils: sync with latest kernel
|
| + v4l2-ctl: print new SDR buffersize format field.
|
| + v4l2-compliance: add sdr buffersize check
|
| + qv4l2: support output devices
|
| + qv4l2: fix querystd and query_dv_timings
|
| + qv4l2: fix layout issues related to stacked widgets
|
| + v4l2-ctl: upgrade to the latest version of the test pattern generator
|
| + qv4l2: add SDR visualization.
|
| + v4l2-ctl: fix csc colorbar color pre-calculation
|
| + qv4l2: add support for output video devices
|
| + v4l-utils: sync with latest kernel headers
|
| + descriptors.h: include <arpa/inet.h> for ntohs
|
| + v4l2-ctl: --clear-bitmap or --clear-clips didn't actually clear it
|
| + v4l2-ctl/qv4l2: init mv_hor/vert_mode correctly.
|
| + v4l2-ctl: the field setting of the initially queued buffer is wrong.
|
| + qv4l2: implement cropping and composing for video output.
|
| + rds-ctl: changes in the TA bit weren't detected.
|
| + libv4l2rds: DI segment order was swapped
|
| + qv4l2: use setResdOnly for disabled QLineEdit controls
|
| + qv4l2: missed one more place where QLineEdits were disabled.
|
| + (c)v4l-helpers: fix broken tests for existence of ioctls.
|
| + qv4l2: convert the last direct ioctl calls to a cv4l-helper.
|
| + libv4l-mplane: make it aware of the extended pix_format fields
|
| + qv4l2: zero m_tpgLimRGBRange when the device is closed
|
| + qv4l2: use "ADC Frequency" for SDR instead of just "Frequency"
|
| + qv4l2: fix valgrind warnings
|
| + libv4l2: valgrind fixes
|
| + qv4l2: keep the "Controls" text
|
| + v4l2-ctl/qv4l2: sync to latest vivid-tpg.c
|
| + qv4l2: correct PAL pixel aspect values
|
| + v4l2-compliance: add test for S_EDID and the E2BIG corner case
|
| + qv4l2/v4l2-ctl: add support for 14x9 video aspect ratio.
|
| + v4l2-compliance: allow EIO for control ioctls
|
| + v4l2-compliance: reset control counters
|
| + qv4l2: fix segfault when openGL is not compiled in.
|
| + qv4l2: fix audio looping
|
| + qv4l2: allow '-d1' option
|
| + v4l2-ctl/qv4l2: fix movement counter calculation
|
| + qv4l2: fix broken SDR support
|
| + qv4l2: reset bytesperline when changing pixelformat.
|
| +
|
| +Marcel J.E. Mol (1):
|
| + [v4l-utils] keytable: add support for XMP IR protocol
|
| +
|
| +Mauro Carvalho Chehab (13):
|
| + dvbv5-zap: Fix LNBf selection
|
| + libdvbv5: Improve debug logs while scanning PMT
|
| + dvb-file: store services even when SDT is not found
|
| + dvb-file: better store channels without SDT
|
| + parse_usb.pl: fix handling of ./parse_tcpdump_log.pl logs
|
| + keytable: add a way to add all protocols on raw decoders
|
| + ir-keytable: add the list of supported protocols at man page
|
| + keytable: add support for sharp and mce-kbd protocols
|
| + parse_au0828.pl: Add a parser to help with au0828 debug
|
| + dvb-file: fix memory-deallocation bug
|
| + parse_au0828.pl: fix I2C read payload
|
| + keytable: Mask selected protocols with the supported ones
|
| + ir-keytable.1: add XMP protocol at manpage
|
| +
|
| +Ove Brynestad (15):
|
| + qv4l2: add and use storage for renderer independent frame info
|
| + qv4l2: move setFrame out of renderer specific classes
|
| + qv4l2: moved Qt scale/crop to common class
|
| + qv4l2: removed separate crop offset function
|
| + qv4l2: Made cropsize available to glengine
|
| + qv4l2: moved frame/rate count assignment to common class
|
| + qv4l2: moved crop calculation out of GL renderer
|
| + qv4l2: update common size variables at GL resize
|
| + qv4l2: moved scaling calculations from setRenderFrame
|
| + qv4l2: refactored capwin variables
|
| + qv4l2: refactor aspect size calculation
|
| + qv4l2: refactor crop size calculation
|
| + qv4l2: refactored cropSize to deliver cropped size
|
| + qv4l2: Fixed cropping bug
|
| + qv4l2: Add option to enable linear scaling filter
|
| +
|
| +Reynaldo H. Verdejo Pinochet (1):
|
| + [libdvbv5] dvb-sat: add universal Ku band (extended) LNBF def
|
| +
|
| +Rob Barker (1):
|
| + v4l-utils: libdvbv5: fix compilation issue
|
| +
|
| +Thiago Santos (1):
|
| + v4l2grab: Add threaded producer/consumer option
|
| +
|
| +
|
| +
|
| +v4l-utils-1.2.0
|
| +---------------
|
| +
|
| +Alain VOLMAT (1):
|
| + buildsystem: Fix configure.ac --disable-v4l-utils option
|
| +
|
| +Andreas Weber (2):
|
| + v4l2-ctl-misc.cpp: bugfix display #of readbuffers
|
| + v4l2gl/v4l2grab: fix errno assignment in while loop
|
| +
|
| +André Roth (43):
|
| + libdvbv5: VCT bitmap fixup
|
| + libdvbv5: fix NIT structures
|
| + libdvbv5: implement dvb_fe_dummy for logging
|
| + libdvbv5: prefix VCT with atsc_ instead of dvb_
|
| + libdvbv5: fix missing includes
|
| + libdvbv5: cleanup dvb_nit_transport_foreach macro
|
| + libdvbv5: implement ATSC standard header
|
| + libdvbv5: implement MGT table parser
|
| + libdvbv5: implement ATSC EIT
|
| + libdvbv5: fix reading multisection tables
|
| + libdvbv5: service location descriptor support
|
| + libdvbv5: support info info log via dvb_loginfo
|
| + libdvbv5: fix asprintf compile warnings
|
| + libdvbv5: mpeg elementary stream parsers
|
| + libdvbv5: fix EIT parsing
|
| + libdvbv5: shared lib and installing headers
|
| + libdvbv5: remove header files from SOURCES in Makefile.am
|
| + libdvbv5: fix dvb_parse_descriptors and make dvb_desc_init private
|
| + libdvbv5: add attribute packed to structs and unions
|
| + libdvbv5: add parser for CAT
|
| + libdvbv5: add parser for ca and ca_identifier descriptors
|
| + libdvbv5: fix PMT parser
|
| + libdvbv5: cleanup printing tables and descriptors
|
| + libdvbv5: use DVB_DESC_HEADER macro in all descriptors
|
| + libdvbv5: make dvb_desc_default_init and dvb_desc_default_print private
|
| + libdvbv5: allow table parsers to get specific pointer to table struct
|
| + libdvbv5: descriptor parser return int
|
| + libdvbv5: remove unneeded includes
|
| + libdvbv5: fix lost ressource in atsc_eit
|
| + libdvbv5: add support for tables with multiple ts_id and section gaps
|
| + libdvbv5: reunite atsc_table_header and dvb_table_header
|
| + libdvbv5: fix asprintf compile warning in dvbv5-scan
|
| + libdvbv5: make crc32 public
|
| + libdvbv5: make dvb_table_filter_free public
|
| + libdvbv5: cleanup table parsers
|
| + libdvbv5: cleanup printing of tables and descriptors
|
| + libdvbv5: rename descriptor functions
|
| + libdvbv5: move table parsers to separate directory
|
| + libdvbv5: cleanup parser API
|
| + libdvbv5: short API description
|
| + libdvbv5: build dynamic libdvbv5 by default
|
| + libdvbv5: improve CRC size handling
|
| + libdvbv5: improve DVB header handling
|
| +
|
| +Antonio Ospite (1):
|
| + libv4lconvert: Fix a regression when converting from Y10B
|
| +
|
| +Antti Palosaari (1):
|
| + v4l2-ctl: add tuner support for SDR tuners
|
| +
|
| +Baard Eirik Winther (1):
|
| + qv4l2: Add cropping option to remove pillarbox
|
| +
|
| +Bård Eirik Winther (33):
|
| + qv4l2: move function ctrlEvent
|
| + qv4l2: add hotkeys for common operations
|
| + qv4l2: fix minimum size in capture win to frame size
|
| + qv4l2: add Capture menu
|
| + qv4l2: new modular capture window design
|
| + qv4l2: add OpenGL rendering
|
| + qv4l2: alter capture menu
|
| + qv4l2: new ALSA stream source code
|
| + qv4l2: fix a bug where the alsa thread never stops
|
| + qv4l2: add ALSA stream to qv4l2
|
| + qv4l2: add ALSA audio playback
|
| + qv4l2: fix YUY2 shader
|
| + qv4l2: fix black screen with opengl after capture
|
| + qv4l2: show frames option can be toggled during capture
|
| + qv4l2: add function getMargins
|
| + qv4l2: add video scaling for CaptureWin
|
| + qv4l2: add hotkey for reset scaling to frame size
|
| + qv4l2: add aspect ratio support
|
| + qv4l2: generalized opengl include guards
|
| + qv4l2: fix YUY2 shader
|
| + qv4l2: fix black screen with opengl after capture
|
| + qv4l2: show frames option can be toggled during capture
|
| + qv4l2: create function getMargins
|
| + qv4l2: add video scaling for CaptureWin
|
| + qv4l2: added resize to frame size in Capture menu
|
| + qv4l2: add hotkey for reset scaling to frame size
|
| + qv4l2: add pixel aspect ratio support for CaptureWin
|
| + qv4l2: change m_scaledFrame to m_scaledSize
|
| + qv4l2: fix missing status tips
|
| + qv4l2: fix program input parameters
|
| + qv4l2: add manpage
|
| + qv4l2: updated about window
|
| + qv4l2: fix GeneralTab layout
|
| +
|
| +Gregor Jasny (22):
|
| + Start v4l-utils 1.1.x development branch
|
| + libv4lconvert: Reject too short source buffer before accessing it
|
| + buildsystem: use subdir-objects automake option as suggested by automake
|
| + buildsystem: Do not specify library version for static libs
|
| + buildsystem: Use autoconf variable for symbol visibility flag
|
| + buildsystem: Use C99 by default
|
| + libdvbv5: Fix compiler warning about signedness
|
| + libv4lconvert: Add ASUS A7M to upside down table
|
| + libdvbv5: FIx check for available adaptation field
|
| + libdvbv5; Fix typo in MPEG TS print function
|
| + v4l2-ctl: Do not leak framebuffer handle in error paths
|
| + dvbv5-zap: Close open file descriptor in error path
|
| + dvbv5-zap: Always initialize status variable
|
| + libv4lconvert: Error out if source or destination pointers are null
|
| + libv4lconvert: Gracefully handle unknown SE401 destination formats
|
| + libdvbv5: Distribute internal header, too
|
| + mediactl: Distribute internal header, too
|
| + buildsystem: Distribute Android.mk files
|
| + v4l2-compliance: Distribute internal header, too
|
| + qv4l2: Distribute manpage
|
| + libdvbv5: Do not install libdvbv5 by default
|
| + Prepare for 1.2.0 release
|
| +
|
| +Hans Verkuil (130):
|
| + qv4l2: fix a segfault for native 32 bpp formats
|
| + Revert "qv4l2: add aspect ratio support"
|
| + Revert "qv4l2: add hotkey for reset scaling to frame size"
|
| + Revert "qv4l2: add video scaling for CaptureWin"
|
| + Revert "qv4l2: add function getMargins"
|
| + Revert "qv4l2: show frames option can be toggled during capture"
|
| + Revert "qv4l2: fix black screen with opengl after capture"
|
| + Revert "qv4l2: fix YUY2 shader"
|
| + qv4l2: add cropping to CaptureWin and Qt render
|
| + qv4l2: call setFrame before resize to get correct frame size calculation
|
| + rds-ctl: fix segfault in list_devices()
|
| + v4l2-ctl: fix '--set-dv-bt-timings query' option.
|
| + v4l2-ctl: properly close filehandles on error
|
| + v4l-utils: sync with latest kernel.
|
| + v4l2-ctl: set b.num_planes to 1 for single plane output formats.
|
| + qv4l2: crop: take pixel aspect ratio into account.
|
| + v4l2-compliance: check for invalid m2m + overlay caps
|
| + v4l2-compliance: check that streaming will fail for overlays
|
| + v4l2-ctl: use libv4l2 wrapper for mmap as well.
|
| + qv4l2: fix broken VBI support
|
| + v4l-utils: run sync-with-kernel, add ioctl32 tests for v4l2-subdev.h
|
| + v4l2-ctl: errors during streaming setup were ignored
|
| + libv4l2rds: update the list of AFs if the number of AFs changes
|
| + libv4l2rds: rename V4L2_RDS_FLAG_STATIC_PTY to _DYNAMIC_PTY
|
| + rds-ctl: add support for dynamic/static PTY
|
| + v4l2-ctl: --all should also show multiplanar formats.
|
| + v4l2-compliance: add bytesperline sanity check for multiplanar formats.
|
| + v4l2-compliance: add streaming tests
|
| + v4l2-compliance: fix broken test for V4L2_FRMIVAL_TYPE_CONTINUOUS
|
| + v4l2-ctl: add support for fields
|
| + v4l2-compliance: fix read() test and reopen after read/write
|
| + v4l2-ctl: automatically detect single/multiplanar buffer type.
|
| + v4l2-compliance: test streaming with bogus v4l2_buffer values.
|
| + v4l2-compliance: check if USERPTR is actually supported.
|
| + v4l2-compliance: restore the initial formats after testing S_FMT
|
| + v4l2-compliance: add EXPBUF and DMABUF streaming tests.
|
| + v4l2-compliance: test for invalid dmabuf file descriptors.
|
| + qv4l2: add combobox to select the field format.
|
| + v4l2-compliance: add tests for multiplanar capture.
|
| + v4l2-compliance: fix data_offset related tests
|
| + v4l2-ctl: fix regression when setting vidcap format
|
| + v4l2-compliance: move streaming setup code to main source.
|
| + v4l2-compliance: move functions around.
|
| + v4l2-compliance: Update fixme.txt
|
| + v4l2-compliance: fix BUF_TYPE vs CAP mixup.
|
| + v4l2-compliance: obtain expbuf caps and fix radio/vbi bug
|
| + v4l2-compliance: now support all formats in the streaming tests.
|
| + v4l2-ctl: is_mplane was never set.
|
| + v4l2-compliance: add new mmap tests.
|
| + v4l-utils: fix optional args for short opts
|
| + v4l2-ctl: set timestamp for output buffers.
|
| + v4l2-ctl: add streaming between two video devices using dmabuf
|
| + v4l2-ctl: the colorspace can now be set for outputs.
|
| + v4l2-ctl: improve the overlay support
|
| + v4l2-compliance: add M2M streaming support
|
| + v4l2-compliance: fill output buffers.
|
| + v4l2-compliance: fix check for correct return code for STREAMON.
|
| + v4l2-compliance: reopen node after each streaming test.
|
| + v4l2-compliance: change one warn to info.
|
| + v4l2-compliance: lower default framecount to 60.
|
| + v4l2-compliance: bypass libv4l2 for expbuf handling.
|
| + v4l2-compliance: improve clip checking
|
| + v4l2-compliance: add tests for output buffer error checking
|
| + v4l2-ctl: skip captured buffers with flag V4L2_BUF_FLAG_ERROR
|
| + qv4l2: ignore buffers with flag V4L2_BUF_FLAG_ERROR.
|
| + sync-with-kernel should also copy fb.h
|
| + v4l-utils: ran sync-with-kernel which added the fb.h header.
|
| + qv4l2: two field related fixes
|
| + qv4l2: support top/bottom/alternate field settings.
|
| + qv4l2: add check if the shader function is available.
|
| + v4l2-compliance: check for presence of a tuner/modulator
|
| + v4l2-compliance: improve format matching code.
|
| + qv4l2: initialize comboboxes with sensible initial sizes.
|
| + qv4l2: QUERYSTD returns STD_UNKNOWN if there is no standard
|
| + qv4l2: fix frequency handling
|
| + qv4l2: disable what shouldn't be touched while streaming.
|
| + v4l2-compliance: add tests for queuing operations with invalid indices.
|
| + v4l2-compliance: more nasty evil stream I/O checks
|
| + qv4l2: fix incorrect call to s_fmt when disabling width/height
|
| + qv4l2: fix incorrect handling of fields
|
| + v4l-utils: sync with latest kernel headers.
|
| + v4l2-ctl: add support for SDR FMT
|
| + v4l2-ctl: implement list SDR buffers command
|
| + v4l2-ctl: add timestamp source support.
|
| + v4l2-compliance: add timestamp source tests.
|
| + v4l2-ctl: add missing v4l2-ctl-sdr.cpp file.
|
| + v4l2-ctl: support SDR capture streaming.
|
| + v4l2-compliance: add SDR compliance tests.
|
| + v4l2-compliance: add 1HZ support when setting the frequency.
|
| + qv4l2: add SDR support.
|
| + qv4l2: use QDoubleSpinBox for frequency inputs
|
| + v4l2-compliance: support menu controls with more than 32 items
|
| + v4l2-ctl/compliance: use the correct mmap/munmap functions.
|
| + v4l2-ctl: add support for custom bytesperline values.
|
| + qv4l2: increase max width/height to 4K resolution.
|
| + v4l2-ctl: fix printing of buffer flags
|
| + v4l-utils: sync to latest kernel headers
|
| + v4l2-ctl: add --clear-edid option.
|
| + v4l2-ctl: rename old v4l2_subdev_edid and VIDIOC_SUBDEV_G/S_EDID
|
| + v4l2-compliance: add test setting all enumerated timings.
|
| + v4l2-compliance: add G/S_EDID tests.
|
| + libv4lconvert: remove broken ALTERNATE handling
|
| + v4l2-compliance: add helper headers
|
| + v4l2-compliance: use the new cv4l-helpers.h header.
|
| + v4l2-compliance: m2m devices should have only one input and output
|
| + v4l2-compliance: test control/format/codec ioctls for all inputs/outputs
|
| + qv4l2: add support for V4L2_PIX_FMT_NV16M/61M
|
| + v4l2-compliance: fix function pointer prototype.
|
| + v4l2-compliance: add missing 'class' keyword after 'friend'
|
| + v4l2-compliance: fix 32-bit compilation for v4l_fd_init()
|
| + qv4l2: only set m_isRadio if m_isSDR is true.
|
| + qv4l2: fix modulator frequency bugs
|
| + libv4lconvert: fix a v4l2-compliance error
|
| + v4l2-compliance: don't do the global format test when using libv4l2.
|
| + sync-with-kernel: update to latest kernel headers.
|
| + libdvbv5: fix compile error
|
| + v4l2-ctl: add support V4L2_EVENT_SOURCE_CHANGE
|
| + libdvbv5: generate the correct include in dvb-v5.c
|
| + Synced with latest kernel.
|
| + Add missing v4l2-mediabus.h
|
| + Synced with latest kernel
|
| + qv4l2: fix segmentation fault when compiled without ALSA support.
|
| + v4l2-compliance: fix broken querymenu check.
|
| + qv4l2: add support for the V4L2_EVENT_SOURCE_CHANGE event.
|
| + v4l2-compliance: don't warn about missing frameintervals
|
| + v4l2-ctl: add support to try/set raw VBI formats
|
| + v4lgrab/vbi-test: remove these utilities
|
| + qv4l2-qt3: remove utility
|
| + qv4l2: fix opengl support for RGB32/BGR32.
|
| + v4l2-compliance: M2M cap + input or output caps should be an error.
|
| +
|
| +Hans de Goede (6):
|
| + libv4lcontrol: Check control_flags before doing wildcard maching on upside_down
|
| + libv4lcontrol: Add Asus F3Sc with 04f2:b012 cam as upside down false positive
|
| + libv4l2: decomress-helper: close fds then wait for helper to exit
|
| + rc_keymaps: Add a keymap for the remote shipped with allwinner ba10 tv boxes
|
| + rc_keymaps: Add a keymap for the remote shipped with allwinner i12-a20 tv boxes
|
| + rc_keymaps: Add keymap for the remote shipped with the Wobo i5 tv box
|
| +
|
| +Hans-Christian Egtvedt (8):
|
| + v4l2-ctl: remove unnecessary inclusion of libv4l2.h
|
| + v4l2-compliance/ctl: drop libv4l2 dependency if NO_LIBV4L2 is defined
|
| + Add static configuration file for Android builds
|
| + v4l2-ctl/dbg: include android-config.h header file if ANDROID is set
|
| + v4l2-compliance: add Android.mk makefile
|
| + v4l2-ctl: add Android.mk makefile
|
| + v4l2-dbg: add Android.mk makefile
|
| + INSTALL: add cross compile and install procedures for Android
|
| +
|
| +Lad, Prabhakar (2):
|
| + libv4l: Update the README name for libv4l
|
| + libv4l: Update the link pointing the patch for porting the application to libv4l2
|
| +
|
| +Laurent Pinchart (17):
|
| + Import the media-ctl utility and libraries
|
| + media-ctl: Rename source files
|
| + media-ctl: Remove the obsolete device argument from the help text
|
| + media-ctl: Document the --links option argument
|
| + media-ctl: Always print the full help message
|
| + media-ctl: Don't install libmediactl and libv4l2subdev
|
| + media-ctl: Update copyright years
|
| + media-ctl: Fix off-by-one buffer overflow with readlink
|
| + media-ctl: Fix media device version printing
|
| + media-ctl: Add fall through comment to fix Coverity warning
|
| + media-ctl: libv4l2subdev: Add DV timings support
|
| + media-ctl: Move flags printing code to a new print_flags function
|
| + media-ctl: Add DV timings support
|
| + Update sync-with-kernel to use installed kernel headers
|
| + wip
|
| + media-ctl: Pass a positive error value to strerror()
|
| + Revert "wip"
|
| +
|
| +Martin Bugge (1):
|
| + v4l2-ctl: add EDID get and set options
|
| +
|
| +Mauro Carvalho Chehab (166):
|
| + dvbv5-scan: Allow using separate adapter for FE and demux
|
| + libdvbv5: add descriptor parser for ATSC TVCT/CVCT tables
|
| + libdvbv5: fix VCT parsing
|
| + libdvbv5: Add ATSC specific descriptors
|
| + libdvbv5: add parser for ATSC service location
|
| + libdvbv5: Add support for additional descriptors at VCT table
|
| + libdvbv5: Add table ID of extra NIT/SDT tables
|
| + libdvbv5/dvb-scan: Modify to use the newer TS tables parser
|
| + libdvbv5: move DVB scan handler code to a separate file
|
| + libdvbv5: move handler code to a separate file
|
| + libdvbv5: move all tables structs to the handler data
|
| + libdvbv5: fixup parsing of PMT tables
|
| + libdvbv5: Add a parser for extension descriptors
|
| + libdvbv5/dvb-scan: handle allocation errors
|
| + libdvbv5/dvb-scan: be more verbose in debug mode
|
| + libdvbv5/dvb-scan: Fix a series of checks at buffer handling
|
| + libdvbv5/parse_string: don't free twice
|
| + libdvbv5: better handle memory errors
|
| + libdvbv5/descriptors: print descriptor number in hexadecimal
|
| + descriptors/nit: byte struct should be packed
|
| + libdvbv5/descriptors: Make easier to read/edit the descriptors table
|
| + libdvbv5: add support for ISDBT terrestrial system descriptor
|
| + libdvbv5: add parser for TS information descriptor
|
| + libdvbv5: Add descriptors for virtual channel number
|
| + libdvbv5: Add support for partial reception
|
| + libdvbv5: add suport for DVB-T2 delivery descriptor
|
| + libdvbv5: avoid playing with memory
|
| + libdvbv5/dvb-scan-table-handler:free the new table descriptors
|
| + libdvbv5: Add some missing code to free data
|
| + libdvbv5: Better handle program data
|
| + libdvbv5/dvb-fe: make valgrind happy
|
| + libdvbv5/descriptors: descriptors data should always be freed
|
| + libdvbv5/dvb-scan: fix memory leak
|
| + libdvbv5/dvb-scan-table-handler: remove free of unallocated structs
|
| + libdvbv5: produce dvb data from the new structures
|
| + libdvbv5/dvb-file: use the new descriptors for virtual channel
|
| + libdvbv5/dvb-file: fix allocation of dvb_file
|
| + libdvbv5/dvb-file: fix parameters for dvb_vchannel()
|
| + Fix desc_frequency_list descriptor
|
| + libdvbv5: add support for ATSC VCT table parsing
|
| + libdvbv5: On ATSC, only try to get SDT if VCT is not found
|
| + libdvbv5: don't leak memory on ATSC service location
|
| + dvb-fe: don't cause memory leak on open errors
|
| + dvbv5-scan: release resources on errors
|
| + libdvbv5/dvb-file: Allow using SDT for ATSC
|
| + libdvbv5/dvb-scan: avoid memory leak on table read timeout
|
| + dvb/dvbv5-zap: Fix help message
|
| + libdvbv5/dvb-scan: require PAT also for ATSC
|
| + libdvbv5/dvb-file: Fix the logic for program found check
|
| + libdvbv5/descriptors: Fix error handling routine
|
| + libdvbv5/descriptors: Fix extension descriptor handling
|
| + libdvbv5/descriptors: don't leak memory on error
|
| + libdvbv5/dvb-file: Don't leave memory leaks on channel store failure
|
| + libdvbv5: avoid nit to read out of the buffer
|
| + libdvbv5: be sure to not go past buffer on PAT parsing
|
| + libdvbv5: add multisection support for PAT table
|
| + libdvbv5: fix debug msg for Network PID
|
| + libdvbv5: don't cause crash if NIT is missing on fe-file.c
|
| + libdvbv5: Add missing dvb_dmx_stop() on error handling
|
| + libdvbv5: be sure to not go past buffer on PMT parsing
|
| + libdvbv5: be sure to not go past buffer on SDT parsing
|
| + libdvbv5: be sure to not go past buffer on VCT parsing
|
| + libdvbv5: shut up a few compilation warnings
|
| + libdvbv5: improve debug messages
|
| + libdvbv5/dvb-file: describe the service type on the logs
|
| + dvbv5-scan: move scanning code into dvb_scan_transponder()
|
| + libdvbv5: Re-add NIT transponders addition
|
| + libdvbv5: Re-add parser for ISDB-T NIT transponders addition
|
| + libdvbv5: Re-add parser for ISDB-T NIT transponders addition
|
| + libdvbv5: add support for DVB-S/S2 at NIT parser
|
| + libdvbv5: add support for DVB-T2 at NIT parser
|
| + libdvbv5: remove the remaining bits from the NIT parsers
|
| + libdvbv5: better implement the NIT parser
|
| + libdvbv5: properly handle ISDB-T partial reception
|
| + libdvbv5: get rid of dvb-scan-table-handler.[ch]
|
| + libdvbv5: handle NIT descriptors when verbose is not enabled
|
| + libdvbv5: Improve descriptor error logs
|
| + libdvbv5: Fix the size of the LCN descriptor
|
| + libdvbv5: some error handling improvements on dvb-file
|
| + libdvbv5/descriptors.c: fix two warnings
|
| + dvbv5-zap: allow using transponder frequency while in monitor mode
|
| + dvbv5-zap: make Valgrind happy
|
| + libdvbv5: clear data before setting a dmx filter
|
| + libdvbv5/dvb-demux: fix CodingStyle
|
| + dvbv5-zap: handle timeout also while in monitor mode
|
| + dvbv5-zap: exit nicely on SIGTERM/SIGINT
|
| + dvbv5-scan: handle SIGTERM/SIGINT nicely
|
| + dvbv5-zap: only handle SIGALRM if need
|
| + libdvbv5: fix extension descriptor handler
|
| + libdvbv5: fix T2 delivery descriptor handler
|
| + libdvbv5: fix dvb-scan handler for T2 descriptor
|
| + libdvbv5: fix terrestrial delivery constellation table
|
| + libdvbv5: change log level for the two nit handler messages
|
| + libdvbv5/dvb-scan: Remove dead code and add a check after realloc()
|
| + libdvbv5: don't use realloc() inside pat.c
|
| + dvbv5-scan: fix detection of duplicated freqs at the input file
|
| + libdvbv5: fix error condition on ATSC service location descriptor
|
| + libdvbv5: fix error condition on ISDBT delivery descriptor
|
| + libdvbv5: Fix other error conditions for out of memory
|
| + dvb5-zap: Better handle the MPEG TS header
|
| + libdvbv5/dvb-scan: all tables should have an specified size
|
| + libdvbv5: pack NIT table
|
| + libdvbv5: fix other error conditions for out of memory
|
| + libdvbv5: fix some out-of-bound acesses on hexdump()
|
| + libdvbv5: Simplify PAT handling
|
| + libdvbv5: simplify NIT table parser
|
| + libdvbv5: cleanup PAT table parser
|
| + libdvbv5: simplify PMT table parser
|
| + libdvbv5: simplify SDT table parser
|
| + libdvbv5: simplify VCT table parser
|
| + dvb/README: Remove some obsolete data
|
| + dvbv5-zap: fix all-pids record mode
|
| + libdvbv5: fix memory leak at ISDB partial reception handler
|
| + libdvbv5: Fix memory leak at TS info handler
|
| + dvb-fe: be a little less verbose with verbosity level 1
|
| + dvbv5-zap: on all pids mode, we can use the frequency
|
| + dvbv5-zap: fix frontend status handling
|
| + dvbv5-zap: allow using a frequency for a channel on exit after tuning
|
| + libdvbv5: Fix a warning at isdb_desc_partial_reception_free
|
| + libdvbv5: fix retrieve parameters for ISDB-T
|
| + libdvbv5/dvb-fe: Fall back to v3 if needed
|
| + libdvbv5: Only discard the services not found
|
| + dvb-fe: fix using a DVB-T file for ISDB-T
|
| + dvb: simplify the logic that sets a (compat) DTV delivery system
|
| + dvb-scan: remove ISDB-T hack from it
|
| + libdvbv5: fix get_frontend logic
|
| + Replace my email address with the new one
|
| + libdvbv5: move store/retrieve functions upper
|
| + libdvbv5: better handle ATSC/Annex B
|
| + dvb-scan: fix a print message
|
| + descriptors: be sure to not read past the buffer
|
| + vct: avoid read descriptors past the buffer
|
| + dvb-demux: add code for DVB section filter
|
| + dvb: Fix VCT handling
|
| + dvb-scan: don't handle NIT table by default on ATSC
|
| + dvb-fe: Add support for setting the LNA before tuning
|
| + dvb: add support for LNA setting at scan and zap
|
| + dvb-fe: Use a separate call to change LNA settings
|
| + Add a parser for drxj
|
| + Revert "dvb-scan: don't handle NIT table by default on ATSC"
|
| + libdvbv5: better document some MPEG TS fields
|
| + libdvbv5: reimplement the logic that gets a full section
|
| + dvbv5-zap: only start audio filtering if audio PID > 0
|
| + libdvbv5: Frequency is unsigned. use %u to print it
|
| + libdvbv5: fix ISDB-T frequency calculus on 32 bits machines
|
| + libdvbv5: move ISDB-T frq conversion to the descriptors code
|
| + libdvbv5: fix the area code size on ISDB-T
|
| + dvbv5-zap: fix usage of --record without --output
|
| + dvbv5-zap: Make dvbv5 as the default format
|
| + dvbv5-zap: better implement the --record flag
|
| + dvbv5-zap: only open the DVR interface if outputing
|
| + dvb-zap: fix --search argument
|
| + libdvbv5: Change license to LGPL v2.1
|
| + libdvbv5: Remove two warnings on 32 bits compilation
|
| + Revert "libdvbv5: Change license to LGPL v2.1"
|
| + libdvbv5: don't override a parameter when setting lna
|
| + libdvbv5: Fix the speedup scan condition
|
| + dvb-file: Fix bandwidth handling at online write function
|
| + contrib: add a parser for dib0700
|
| + parse_dib0700.pl: parse the remaining messages on dib0700
|
| + parse_dib0700.pl: improve parser
|
| + parse_dib0700.pl: add support to identify delays
|
| + parse_dib0700.pl: Make the delays multiple of 10ms
|
| + parse_dib0700.pl: autoflush writes
|
| + parse_dib0700.pl: Parse REQUEST_SET_I2C_PARAM
|
| + parse_dib0700.pl: parse REQUEST_GET_VERSION
|
| +
|
| +Ricardo Ribalda Delgado (2):
|
| + libv4lconvert: Support for Y16 pixel format
|
| + libv4lconvert: Support for RGB32 and BGR32 format
|
| +
|
| +Rob Barker (1):
|
| + libdvbv5: Find other TS in NIT pointer fix
|
| +
|
| +Stefan Ringel (1):
|
| + v4l-utils: bugfix memory chunk
|
| +
|
| +Thiago Santos (1):
|
| + libv4l2: release the lock before doing a DQBUF
|
| +
|
| +
|
| +
|
| +v4l-utils-1.0.0
|
| +---------------
|
| +
|
| +Devin Heitmueller (1):
|
| + Don't call G_TUNER unless actually performing a tuning related call
|
| +
|
| +Diego Viola (1):
|
| + Fix spelling of Qt in .desktop file (typo)
|
| +
|
| +Gregor Jasny (20):
|
| + qv4l2: Silence Qt build tools invocation if silent mode is enabled
|
| + buildsystem: Do not bootstrap complete gettext for testing iconv
|
| + libdvb: Disable library installation by default
|
| + keytable: Always check if strtok return value is null
|
| + libv4lconvert: Prevent integer overflow by checking width and height
|
| + xc3082: Fix use after free in free_firmware()
|
| + libdvbv5: Fix reallocation in parse_lcn
|
| + rds-ctl: Always terminate strings properly
|
| + libdvbv5: Fix copy and paste error in parse_service()
|
| + libv4lconvert: Avoid division by 0 if gamma value is corrupted
|
| + pixfmt-test: Explicitely mention fall-through
|
| + v4l2-ctl: Do not read past end of num_planes array
|
| + libv4lconvert: Fix resource leak in sq905 error path
|
| + xc3028: Remove duplicate const
|
| + libdvbv5: Actually check for lock
|
| + libdvbv5: Free all memory in read_dvb_file error path
|
| + libdvbv5: Free all memory in parse_format_oneline error path
|
| + libdvbv5: Free tbl in dvb_read_section_with_id error paths
|
| + libdvbv5: Properly free temporary variables at end of parse_string
|
| + libdvbv5: Remove dead code in read_dvb_file.
|
| +
|
| +Guy Martin (6):
|
| + libdvbv5: Remove buggy parsing of extra DTV_foo parameters
|
| + libdvbv5: Add parsing of POLARIZATION
|
| + libdvbv5: Export dvb_fe_is_satellite()
|
| + libdvbv5: Fix satellite handling and apply polarization parameter to the frontend
|
| + libdvbv5: Use a temporary copy of the dvb parameters when tuning
|
| + dvbv5-zap: Parse the LNB from the channel file
|
| +
|
| +Hans Verkuil (20):
|
| + v4l2-dbg: remove unused source.
|
| + v4l2-compliance: refactor code to create invalid formats.
|
| + v4l2-compliance: improve overlay clipping tests.
|
| + v4l2-compliance: check that g_register fills the size field.
|
| + rds-ctl: fix percentage handling.
|
| + rds-ctl: support -d10 to refer to radio10.
|
| + v4l2-compliance: fix typo
|
| + v4l2-ctl: fix wrong array accesses in selection code.
|
| + v4l2-ctl: V4L2_BUF_TYPE_PRIVATE is no longer used.
|
| + Remove references to v4l2-chip-ident.h
|
| + Sync with latest 3.10.0-rc7 kernel.
|
| + libv4l2/log.c: add entry for new VIDIOC_DBG_G_CHIP_INFO ioctl.
|
| + Remove committed v4l2-chip-ident.h headers.
|
| + Sync with 3.11 kernel.
|
| + qv4l2: always update controls by default
|
| + libv4l2rds: fix coverity issues.
|
| + rds-ctl: fix coverity issues.
|
| + v4l2-dbg: fix coverity issues.
|
| + v4l2-ctl: fix coverity issues.
|
| + v4l2-ctl: (*XX).Foo -> XX->Foo
|
| +
|
| +Hans de Goede (3):
|
| + libv4l2: Add logging of dqbuf timestamps to debug logging
|
| + libv4l2: Add V4L2_PERROR convenience macro
|
| + libv4l2: do not log a ton of errors on device unplug
|
| +
|
| +Konke Radlow (3):
|
| + libv4l2rds: support RDS-EON and TMC-tuning info
|
| + rds-ctl: support RDS-EON and TMC-tuning info
|
| + libv4l2rds.c: moving functions to get rid of declarations
|
| +
|
| +Mauro Carvalho Chehab (3):
|
| + dvbv5-zap: sort the params by the key letter
|
| + dvbv5-zap: add an option to not filter pids
|
| + parse_string: fix encodings for Taiwan
|
| +
|
| +Ricardo Ribalda Delgado (1):
|
| + v4l2_compliance: -EINVAL is expected when ret is not 0
|
| +
|
| +v4l-utils-0.9.5
|
| +---------------
|
| +
|
| +Gregor Jasny (1):
|
| + contrib: Add missing dist files for ioctl-test
|
| +
|
| +v4l-utils-0.9.4
|
| +---------------
|
| +
|
| +André Roth (3):
|
| + libv4l-mplane: Fix compile flags to allow anonymous unions with gcc 4.5.5
|
| + libdvbv5: fix compile error
|
| + libdvbv5: fix anonymous unions on older gcc
|
| +
|
| +Antonio Ospite (2):
|
| + contrib/m920x/m920x_parse.pl: stricter check when extracting firmware
|
| + contrib/m920x/m920x_parse.pl: silence a warning
|
| +
|
| +Gregor Jasny (4):
|
| + libv4l: Add ASUS F2F with STK DC-1125 to upside down list
|
| + libv4l: Add Founder PC T14MF to upside down table
|
| + contrib: Add missing files to distribution list
|
| +
|
| +Hans Petter Selasky (1):
|
| + libv4l: Don't try to access sysfs 256 times when there is no sysfs
|
| +
|
| +Hans Verkuil (52):
|
| + qv4l2: add missing information for string and integer controls
|
| + qv4l2: add support for control events.
|
| + v4l2-compliance: allow EINVAL to be returned by S/TRY_FMT.
|
| + qv4l2: fix setting frequency for radio modulators
|
| + v4l-utils: sync with latest kernel.
|
| + v4l2-ctl: show used timestamp type.
|
| + v4l2-compliance: add check whether the timestamp is monotonic.
|
| + v4l-utils: fix make install problems with ln -s
|
| + v4l-utils: fix two 'dereferencing type-punned pointer' warnings
|
| + v4l2-compliance: reorganize verbosity options
|
| + ioctl-test: improve comments and add checks against ioctl num changes.
|
| + v4l2-compliance: improve read/write error reporting.
|
| + qv4l2: don't show "Query Standard" button if QUERYSTD isn't supported.
|
| + qv4l2: correctly update frame width and height for fixed resolutions.
|
| + v4l2-ctl: improve interval reporting.
|
| + v4l2-ctl: when streaming to file use bytesused instead of the full buffer.
|
| + v4l2-ctl: improve dv_timings reporting.
|
| + v4l2-ctl: support data_offset when streaming multiplanar formats.
|
| + v4l2-ctl: show buffers or key/P/B-frames when capturing.
|
| + v4l2-* utils: allow -d11 to refer to /dev/video11
|
| + v4l-utils: run sync-with-kernel.
|
| + v4l2-ctl: add support for 'COPY' timestamp and ctrl range events.
|
| + v4l2-compliance: add support for the new 'COPY' timestamp type.
|
| + v4l2-compliance: missing check on the frameinterval
|
| + v4l2-compliance: improve tests when TRY/S_FMT returns EINVAL.
|
| + qv4l2: do nothing if querystd does not detect a standard.
|
| + qv4l2: handle control range updates.
|
| + libv4l2/log.c: update list of ioctls.
|
| + v4l2-compliance: fix s_std test: ENODATA is a valid error code.
|
| + v4l2-ctl: don't produce verbose output for QBUF while streaming.
|
| + qv4l2: fix the way interlaced formats are displayed
|
| + v4l2-ctl: fix the field-per-second calculation
|
| + qv4l2/v4l2-ctl: fix the fields-per-second calculation
|
| + qv4l2/v4l2-ctl: fix rounding error in field-per-second calculation
|
| + v4l2-ctl: add the --concise option.
|
| + v4l-utils: sync with kernel, remove all references to the DV_PRESET API.
|
| + v4l-utils: sync to the latest kernel.
|
| + v4l-utils: sync-with-kernel.
|
| + v4l2-compliance: remove ChipIdent tests
|
| + v4l2-ctl: set bytesused for streaming to the output.
|
| + v4l2-compliance: fix RDS + CAP_READWRITE tests.
|
| + v4l2-compliance: really fix the RDS and V4L2_CAP_READWRITE tests
|
| + v4l2-ctl: add eos and decoder-stop support.
|
| + v4l2-ctl: use references instead of pointers.
|
| + v4l2-ctl: fix a small bug in the stream-count/skip handling.
|
| + v4l2-ctl: split off test pattern generation in a separate source.
|
| + v4l2-ctl: small improvements.
|
| + v4l2-ctl: poll/non-poll behavior fixes
|
| + v4l2-ctl: find_pixel_format couldn't handle output streams.
|
| + v4l-utils: sync with latest kernel.
|
| + v4l2-dbg: replace CHIP_IDENT with CHIP_INFO.
|
| + v4l2-ctl: introduce buffers class to simplify the streaming code
|
| +
|
| +Jean Delvare (1):
|
| + dvbv5-zap: Fix build warning
|
| +
|
| +Laurent Pinchart (2):
|
| + v4l2-compliance: Print invalid return codes in control tests
|
| + v4l2-compliance: Print invalid error_idx values in control tests
|
| +
|
| +Mauro Carvalho Chehab (50):
|
| + ir-keytable: Add support for testing EV_ABS events
|
| + keytable: merge two identical structures into one
|
| + keytable: reorder functions to put similar code together
|
| + keytable: Add handler for EV_REL type
|
| + keytable: also print code for unknown/unhandled events
|
| + keytable: Put events in numeric order
|
| + keytable: Add the remaining other unhandled events
|
| + keytable: Make the parsing code more generic
|
| + keytable: properly print the other MSC_* event names
|
| + keytable: be clear when a value is in hexadecimal
|
| + keytable: always use hexadecimal values for scancodes
|
| + dvbv5-zap: Allow to enable FE debug
|
| + Sync with kernel, with DVB stats
|
| + dvb-fe: add support for DVBv5 stats
|
| + dvbv5-zap: use the new DVBv5 stats API
|
| + dvb-fe: Add a flag to indicate if DVBv5 stats is in use
|
| + dvb-fe: Improve BER measurements for DVBv5
|
| + dvb-fe: Allow returning BER in a float value
|
| + dvbv5-zap: better display BER
|
| + dvb-fe: Add a method to report PER
|
| + dvb: Move the core of the stats logic to dvb-fe
|
| + dvb-fe: Fix PER statistics measurement
|
| + dvb-fe: Add support for a quality measurement
|
| + dvb: Rename a few DVB statistics
|
| + dvb: Add support for retrieving pre-BER data
|
| + dvb: use a macro for the number of Kernel stats
|
| + dvb: Better name the post-BER data
|
| + dvb: add support for pre-BER measurement
|
| + dvb: if the signal vanishes, bit/block error counters should vanish
|
| + dvbv5-zap: improve status display
|
| + dvbv5-scan: use library support for stats print
|
| + dvbv5-scan: also prints signal strength on tuner fail
|
| + ioctl-test: Auto-generate the list of ioctls to test
|
| + Add DVB headers to make sync-with-kernel
|
| + ioctl-test: expand it to also test DVB frontend/demux
|
| + dvbv5-scan: Fix get_signal logic
|
| + dvb-fe: Fix check for stats property
|
| + dvb-fe: Reserve space for the other DVBv5 properties
|
| + dvbv5-zap: Only go back if is there anything to clean
|
| + dvb5-scan: Improve output to better show the status
|
| + dvbv5-scan: don't be too verbose with status
|
| + dvb-scan: Don't call dvb_fe_get_stats() twice
|
| + dvb-fe: Supress statistics if signal lock vanishes
|
| + dvbv5-scan: timeout-multiply should also affect the timeout for scan
|
| + dvbv5-zap: add traffic monitor support
|
| + dvbv5-zap: output stats to stdout on monitor mode
|
| + dvbv5-zap: Better output at monitor mode
|
| + dvbv5-zap: don't stop monitoring for buffer underrun
|
| + dvbv5-zap: better represent low_traffic data in monitor mode
|
| + dvbv5-zap: print elapsed time when buffer overflow happens
|
| +
|
| +Riku Voipio (1):
|
| + v4l-utils: use openat when available
|
| +
|
| +Tzu-Jung Lee (2):
|
| + v4l2-ctl: break down the streaming_set()
|
| + v4l2-ctl: initial attempt to support M2M device streaming
|
| +
|
| +v4l-utils-0.9.3
|
| +---------------
|
| +* Synced with latest kernel headers
|
| +
|
| +* v4l2-ctl changes
|
| + * fixed bug in parse_subopt
|
| + * --list-buffers didn't work for multiplanar formats
|
| +
|
| +* v4l2-compliance
|
| + * work around missing ENODATA on (k)FreeBSD
|
| + * add test whether V4L2_MEMORY_DMABUF is supported
|
| + * add the new EXPBUF ioctl
|
| +
|
| +v4l-utils-0.9.2
|
| +---------------
|
| +* libv4l changes
|
| + * Add a libv4l plugin for mplane handling
|
| +
|
| +* v4l2-ctl changes
|
| + * load initial frames from the file as well
|
| + * add --stream-loop for streaming to an output
|
| + * zero bytesperline
|
| +
|
| +* test utility changes
|
| + * Add an OpenGL test application to test utilities in contrib
|
| +
|
| +* buildsystem changes
|
| + * Use udev pkgconfig file to populate installation directory
|
| + * Query Qt rcc tool location and fall back to rcc if not available
|
| +
|
| +v4l-utils-0.9.1
|
| +---------------
|
| +* libv4l changes
|
| + * Various Pixart JPEG fixes
|
| + * Add more notebooks to the upside down device table
|
| + * Use bytesperline instead of width (Robert Abel)
|
| + * Better luminance quantization table for Pixart JPEG (Jean-Francois Moine)
|
| + * Fix out of bounds array usage
|
| + * Prevent GCC 4.7 inlining error
|
| + * Add support for libjpeg >= v7
|
| + * Add new matching algorithm for upside down table
|
| + * Retry with another frame on JPEG header decode errors
|
| + * Improved JL2005BCD support (Theodore Kilgore)
|
| + * Set errno to EIO if getting 4 consecutive EAGAIN convert errors
|
| + * Make software autowhitebalance converge faster
|
| + * Add quirk support for forced tinyjpeg fallback
|
| +
|
| +* ir-keytable changes
|
| + * Fixed file parsing errors
|
| + * Add support for Sanyo IR and RC-5-SZ protocol
|
| + * Add missing mouse buttons in shipped keytables
|
| +
|
| +* libdvbv5 changes
|
| + * Initial release
|
| +
|
| +* libv4l2rds and rds-ctl
|
| + * Initial release (Konke Radlow)
|
| +
|
| +* qv4l2 changes
|
| + * Fix segfault when there are no inputs or outputs
|
| + * Fix endianess issues
|
| + * Add support for new timing ioctls
|
| + * Improve frequency and radio support
|
| + * Add VBI support
|
| + * Add ability to make a snapshot
|
| + * Add support to stream raw frames into a file
|
| +
|
| +* buildsystem changes
|
| + * Converted buildsystem to autotools
|
| + * Made buildsystem cross compiling friendly
|
| + * Support out of tree builds
|
| +
|
| +v4l-utils-0.8.5
|
| +---------------
|
| +* Utils changes
|
| + * parse_em28xx_drxk.pl: New parser for dumps of em28xx with drxk frontend
|
| + (mchehab)
|
| + * qv4l2: Add support for bitmap controls (hverkuil)
|
| + * v4l2-ctl: add support for the new bitmask control type (hverkuil)
|
| + * v4l2-ctl: add support for the control event (hverkuil)
|
| + * v4l2-ctl: small bugfixes (hverkuil)
|
| + * v4l2-compliance: various new tests (hverkuil)
|
| + * lib_media_dev: various fixes / cleanups (hdegoede)
|
| +* libv4l changes
|
| + * Add some more laptop models to the upside down devices table (hdegoede)
|
| + * Add support for SE401 pixelformat (hdegoede)
|
| + * Software autogain tweaks (hdegoede)
|
| +
|
| +v4l-utils-0.8.4
|
| +---------------
|
| +* Utils changes
|
| + * Various small fixes (hverkuil, mchehab)
|
| + * qv4l2: Add support for configuring the framerate for devices which support
|
| + this like uvc cams (hdegoede)
|
| + * parse_tcpdump_log.pl: new parser for tcpdump / wireshark made usbmon
|
| + dumps (mchehab)
|
| + * New lib_media_dev lib, to pair audio devices with video devices
|
| + (and other combinations) for now this lives in utils and does not get
|
| + installed systemwide, as the API is not stable (mchehab)
|
| +* libv4l changes
|
| + * Add many more laptop models to the upside down devices table (hdegoede)
|
| + * Some small bugfixes (hdegoede)
|
| + * Add vicam cameras to list of cameras need sw auto gain + whitebalance
|
| + (hdegoede)
|
| + * Add support for M420 pixelformat (hdegoede)
|
| + * Add support for Y10B pixelformat (Antonio Ospite)
|
| + * Add support for JPGL pixelformat (jfmoine)
|
| + * Modified (rewrote) jpeg decompression code to use libjpeg[-turbo], for
|
| + much lower cpu load when doing jpeg decompression (hdegoede)
|
| + * Detect usb connection speed of devices (hdegoede)
|
| + * Rewrite src format selection algorithm, taking bandwidth into account and
|
| + choosing the format which will give us the lowest CPU load while still
|
| + allowing 30 fps (hdegoede)
|
| + * Intercept S_PARM and redo src format selection based on new fps setting,
|
| + potentially switching from JPG to YUYV / M420 when the app lowers the
|
| + fps, resulting in a significant lower cpu load (hdegoede)
|
| +
|
| +v4l-utils-0.8.3
|
| +---------------
|
| +* Utils changes:
|
| + * Various ir-keytable improvements (mchehab)
|
| + * Various cx231xx parser improvements (mchehab)
|
| +* libv4l changes
|
| + * Add a few more laptop models to the upside down devices table (hdegoede)
|
| + * Make libv4l1 compile with kernels >= 2.6.38, which no longer have the
|
| + v4l1 linux/videodev.h header (hdegoede)
|
| +
|
| +v4l-utils-0.8.2
|
| +---------------
|
| +* Utils changes:
|
| + * Various ir-keytable improvements (mchehab)
|
| + * Various qv4l2 fixes (hverkuil, hdegoede)
|
| + * Various v4l2-ctl fixes (hverkuil)
|
| + * Add parsers for cx231xx i2c, saa7134 pci, sn9c201 usb and generic usb
|
| + logs (mchehab)
|
| + * v4l2-compliance: lots of new tests (hverkuil)
|
| +* libv4l changes
|
| + * Add many more laptop models to the upside down devices table (hdegoede)
|
| + * Add support for 8-bits grey format (V4L2_PIX_FMT_GREY) (mchehab)
|
| +
|
| +v4l-utils-0.8.1
|
| +---------------
|
| +* Utils changes:
|
| + * Various v4l-keytable improvements (mchehab)
|
| + * Various qv4l2 fixes (hverkuil)
|
| + * v4l2-ctl: Added support for s/g_dv_timings (Mats Randgaard)
|
| +* libv4l changes (hdegoede):
|
| + * Add many more laptop models to the upside down devices table
|
| + * Detect short frames (and retry upto 3 times to get a non short frame)
|
| + * Support (uvc) cameras with more then 16 framesizes properly (Balint Reczey)
|
| + * libv4l1 no longer relies on the kernel v4l1 compat ioctl handling, many
|
| + thanks to Huzaifa Sidhpurwala for his work on this!
|
| + * Add support for Xirlink C-It YYVYUY
|
| + * Add support for konica yuv420 format
|
| +
|
| +v4l-utils-0.8.0
|
| +---------------
|
| +* Utils changes:
|
| + * Various v4l-keytable improvements (mchehab)
|
| + * Various v4l2-ctl fixes (hverkuil)
|
| + * Various qv4l2 fixes (hverkuil)
|
| +* libv4l changes (hdegoede):
|
| + * Add many more laptop models to the upside down devices table
|
| + * Some minor bugfixes
|
| +
|
| +v4l-utils-0.7.91
|
| +----------------
|
| +* Utils changes:
|
| + * Improve v4l-keytable to better support IR (mchehab)
|
| + * Rename v4l-keytable to ir-keytable (mchehab)
|
| +* libv4l changes (hdegoede):
|
| + * Add more laptop models to the upside down devices table
|
| + * Ignore convert errors in the first few frames of a stream
|
| +
|
| +v4l-utils-0.7.90
|
| +----------------
|
| +* This is the first release of v4l-utils, v4l-utils is the combination
|
| + of various v4l and dvb utilities which used to be part of v4l-dvb
|
| + mercurial kernel tree and libv4l.
|
| +* This first version is 0.7.90, as the version numbers continue were libv4l
|
| + as a standalone source archive stops.
|
| +* libv4l changes:
|
| + * Add more laptop models to the upside down devices table
|
| + * Fix Pixart JPEG ff ff ff xx markers removal, this fixes the occasional
|
| + corrupt frame we used to get (thanks to Németh Márton)
|
| + * Enable whitebalance by default on various sonixj based cams
|
| + * Enable whitebalance + gamma correction by default on all sonixb cams
|
| + * Enable gamma correction by default on pac7302 based cams
|
| +
|
| +Note all history below this line only applies to libv4l and not to the utils
|
| +----------------------------------------------------------------------------
|
| +
|
| +libv4l-0.6.4
|
| +------------
|
| +* Add more laptop models to the upside down devices table
|
| +* Add error checking to mr97310a decompression
|
| +* Increase mr97310a minimum clockdiv upon 3 consecutive decoding errors
|
| +* Add support for decompressing CPIA1 compressed YUV
|
| +* Speed up autogain algorithm
|
| +
|
| +libv4l-0.6.3
|
| +------------
|
| +* Add more laptop models to the upside down devices table
|
| +* Improved mr97310a decompression
|
| +* Add support for decompressing yuv420 planar JPEG (one component per SOS,
|
| + 3 SOS per frame), this is needed for w9968cf based cams
|
| +* Add support for STV0680 raw bayer data
|
| +
|
| +libv4l-0.6.2
|
| +------------
|
| +* Add more laptop models to the upside down devices table
|
| +* Put usb id in controls shm segment name for USB devices, to better
|
| + distuingish between devices plugged into the same port
|
| +* Enable software whitebalance and autogain for mr97310a cameras
|
| +* Improvements / tweaks to software autogain algorithm
|
| +
|
| +libv4l-0.6.1
|
| +------------
|
| +* Add more laptop models to the upside down devices table
|
| +* Makefile changes to make life easier for the Debian package (Gregor Jasny)
|
| +* Bugfix: fixup 320x240 output for pac7302 cameras
|
| +* README improvements / clarifications (Bifferos)
|
| +* Bugfix: fix reqbuf Device or Resource busy error when using v4l2_read()
|
| +* Some applications want to use jpg format if possible, so do not hide
|
| + it from the apps (do not assume it always needs conversion)
|
| +* Change controls shm segment name to include the username, as it is only
|
| + writable by the user (this means libv4l controls are per user) (Gregor Jasny)
|
| +* Add support for decompressing sn9c2028 compressed bayer (Theodore Kilgore)
|
| +* Report V4L2_FMT_FLAG_EMULATED in v4l2_fmtdesc flags for emulated formats
|
| +
|
| +libv4l-0.6.0
|
| +------------
|
| +* Recognize disabled controls and replace with fake equivalents where
|
| + available
|
| +* Add support for decompressing ov511 and ov518 "JPEG", by piping data through
|
| + an external helper as I've failed to contact Mark W. McClelland to get
|
| + permission to relicense the code. If you know a working email address for
|
| + Mark W. McClelland, please let me know.
|
| +* Add tons of laptop models to the upside down devices table
|
| +* Support for rgb565 source format by Mauro Carvalho Chehab
|
| +* Many bug fixes (see the mercurial tree for details)
|
| +* Improved pac207 decompression code to also support higher compression
|
| + modes of the pac207, which enables us to use higher framerates.
|
| + Many many thanks to Bertrik Sikken for figuring the decompression out!
|
| +
|
| +libv4l-0.5.99
|
| +-------------
|
| +* Link libv4lconvert with -lm for powf by Gregor Jasny
|
| +* Fix black screen on devices with hardware gamma control
|
| +* Fix crash with devices on which we do not emulate fake controls
|
| +* Add a patch by Hans Petter Selasky <hselasky@freebsd.org>, which should
|
| + lead to allowing use of libv4l (and the Linux webcam drivers ported
|
| + to userspace usb drivers) on FreeBSD, this is a work in progress
|
| +
|
| +libv4l-0.5.98
|
| +-------------
|
| +* Add software gamma correction
|
| +* Add software auto gain / exposure
|
| +* Add support for separate vflipping and hflipping
|
| +* Add fake controls controlling the software h- and v-flipping
|
| +* Add ability to determine upside down cams based on DMI info
|
| +* Add the capability to provide 320x240 to apps if the cam can only
|
| + do 320x232 (some zc3xx cams) by adding black borders
|
| +* Rewrite video processing code to make it easier to add more video filters
|
| + (and with little extra processing cost). As part of this the normalize
|
| + filter has been removed as it wasn't functioning satisfactory anyways
|
| +* Support V4L2_CTRL_FLAG_NEXT_CTRL for fake controls by Adam Baker
|
| +* Some makefile improvements by Gregor Jasny
|
| +* Various small bugfixes and tweaks
|
| +* The V4L2_ENABLE_ENUM_FMT_EMULATION v4l2_fd_open flag is obsolete, libv4l2
|
| + now *always* reports emulated formats through the ENUM_FMT ioctl
|
| +
|
| +libv4l-0.5.97
|
| +-------------
|
| +* As the version number shows this is a beta release of the 0.6.x series,
|
| + the big change here is the addition of video processing to libv4l
|
| + currently this only does whitebalance and normalizing (which turns out
|
| + to be useless for most cams) but the basic framework for doing video
|
| + processing, and being able to control it through fake v4l2 controls using
|
| + for example v4l2ucp is there.
|
| + The initial version of this code was written by 3 of my computer science
|
| + students: Elmar Kleijn, Sjoerd Piepenbrink and Radjnies Bhansingh
|
| +* Currently whitebalancing gets enabled based on USB-ID's and it only gets
|
| + enabled for Pixart webcam's. You can force it being enabled with other
|
| + webcams by setting the environment variable LIBV4LCONTROL_CONTROLS, this
|
| + sets a bitmask enabling certain v4l2 controls which control the video
|
| + processing set it to 15 to enable both whitebalancing and normalize. You
|
| + can then change the settings using a v4l2 control panel like v4l2ucp
|
| +* Only report / allow supported destination formats in enum_fmt / try_fmt /
|
| + g_fmt / s_fmt when processing, rotating or flipping.
|
| +* Some applications / libs (*cough* gstreamer *cough*) will not work
|
| + correctly with planar YUV formats when the width is not a multiple of 8,
|
| + so crop widths which are not a multiple of 8 to the nearest multiple of 8
|
| + when converting to planar YUV
|
| +* Add dependency generation to libv4l by: Gilles Gigan <gilles.gigan@gmail.com>
|
| +* Add support to use orientation from VIDIOC_ENUMINPUT by:
|
| + Adam Baker <linux@baker-net.org.uk>
|
| +* sn9c20x cams have occasional bad jpeg frames, drop these to avoid the
|
| + flickering effect they cause, by: Brian Johnson <brijohn@gmail.com>
|
| +* adjust libv4l's upside down cam detection to also work with devices
|
| + which have the usb interface as parent instead of the usb device
|
| +* fix libv4l upside down detection for the new v4l minor numbering scheme
|
| +* fix reading outside of the source memory when doing yuv420->rgb conversion
|
| +
|
| +libv4l-0.5.9
|
| +------------
|
| +* Add support for MR97310A decompression by Kyle Guinn <elyk03@gmail.com>
|
| +* Add support for sq905c decompression by Theodore Kilgore
|
| + <kilgota@auburn.edu>
|
| +* Add hm12 support for the cx2341x MPEG encoder devices by Hans Verkuil
|
| + <hverkuil@xs4all.nl>
|
| +
|
| +libv4l-0.5.8
|
| +------------
|
| +* Add support for UYVY (for USB Apple iSight) patch by Julien BLACHE
|
| + <jb@jblache.org>
|
| +* Remove v4lconvert_yvyu_to_yuv420 function as its functionality is
|
| + duplicate with v4lconvert_yuyv_to_yuv420
|
| +* Use Requires.private where appropiate in .pc files (patch by Gregor Jasny)
|
| +* Switch to using USB-id's instead of USB product string, as not all devices
|
| + set a unique product string. This fixes the upside down issues with
|
| + genius e-messenger 112 cams
|
| +* Add support for sn9c20x-i420 format patch by Vasily Khoruzhick
|
| + <anarsoul@gmail.com>
|
| +
|
| +libv4l-0.5.7
|
| +------------
|
| +* Fix a nasty (and stupid) bug in the special try_fmt handling for UVC cams
|
| +* Add some more verbose logging of various calls when asking libv4l to log
|
| + calls to a file, to assist in (future) debugging
|
| +
|
| +libv4l-0.5.6
|
| +------------
|
| +* Always do a s_fmt on uvc cams even if this changes nothing, as not doing
|
| + the s_fmt triggers a bug in the uvcvideo driver in kernel <= 2.6.28
|
| + (with certain cams)
|
| +
|
| +libv4l-0.5.5
|
| +------------
|
| +* Avoid the use of try_fmt as much as possible on UVC cams, instead use the
|
| + results of the enum_framesizes ioctl. This is because:
|
| + 1) try_fmt actually causes IO with UVC cams making apps which do lot of
|
| + querrying of device capabilities slow (cheese)
|
| + 2) some buggy cams don't like getting lots of UVC video probes and crash
|
| + when they do
|
| +
|
| +libv4l-0.5.4
|
| +------------
|
| +* Don't report DQBUF errors when errno is EAGAIN, this fixes flooding the
|
| + screen with errors when applications use non blocking mode
|
| +* Add support for downscaling to make apps which want low resolutions
|
| + (skype, spcaview) happy when used with cams which can only do high
|
| + resolutions (by Lukáš Karas <lukas.karas@centrum.cz>).
|
| +* Add support for converting to YV12 planar (next to the already supported
|
| + YU12 / I420)
|
| +* Implement RGB/BGR24 -> YU/YV12 conversion
|
| +
|
| +libv4l-0.5.3
|
| +------------
|
| +* When conversion requires multiple passes don't alloc the needed temporary
|
| + buffer on the stack, as some apps (ekiga) use so much stack themselves
|
| + this causes us to run out of stack space
|
| +
|
| +libv4l-0.5.2
|
| +------------
|
| +* Add Philips SPC210NC to list of cams with upside down sensor, reported by
|
| + Rieker Flaik
|
| +* Work around some drivers (pwc) not properly reflecting what one gets after a
|
| + s_fmt in their try_fmt answer
|
| +* Check that s_fmt atleast gives us the width, height and pixelformat try_fmt
|
| + promised us, and if not disable conversion
|
| +* Only check width, height and pixelformat when checking if we are doing
|
| + conversion, instead of doing a memcmp, as that are the only things which
|
| + the convert code checks
|
| +* Take into account that the buffers only contain half of the lines when
|
| + field is V4L2_FIELD_ALTERNATE
|
| +
|
| +libv4l-0.5.1
|
| +------------
|
| +* Add support for software cropping from 352x288 -> 320x240 / 176x144 ->
|
| + 160x120, so that apps which will only work with vga resolutions like
|
| + 320x240 (Skype!) will work with cams/drivers which do not support cropping
|
| + CIF resolutions to VGA resolutions in hardware. This makes all 2.6.27 gspca
|
| + supported cams, except for the pac7302 which only does 640x480 (and skype
|
| + wants 320x240), work with skype
|
| +* The v4lconvert_convert function was becoming a bit of a mess, so split the
|
| + functionailiy into separate v4lconvert_convert_pixfmt, v4lconvert_rotate and
|
| + v4lconvert_crop functions, and make v4lconvert_convert a frontend to
|
| + these
|
| +* Do not link the wrapper libs against libpthread (patch from Gregor Jasny)
|
| +
|
| +libv4l-0.5.0
|
| +------------
|
| +* Add support for enumerating framesizes and frameintervals of emulated
|
| + formats when the driver supports it for the real format
|
| +* Make sure the video device always gets opened RW even if the application
|
| + asks for RO
|
| +* Add Genius E-Messenger 112 (093a:2476) to list of cams which have their
|
| + sensor upside down
|
| +
|
| +libv4l-0.4.3
|
| +------------
|
| +* Add suport for YUYV and YVYU packed pixel formats (Jean-Francois Moine)
|
| +* Prefer compressed pixformats for resolutions > 176x144
|
| +
|
| +libv4l-0.4.2
|
| +------------
|
| +* The bayer pixel order in gspca's sonixb driver was different from that in
|
| + the sn9c102 driver from the mainline kernel, a recent gspca patch fixes
|
| + this, adjust libv4l to match (and make it work properly with the sn9c102
|
| + driver).
|
| +
|
| +libv4l-0.4.1
|
| +------------
|
| +* When the driver supports read() and we are not converting let the driver
|
| + handle read() instead of emulating it with mmap mode
|
| +* Fix errors and warnings when compiling with ICC (Gregor Jasny)
|
| +* Add support to libv4lconvert for rotating images 90 (for Pixart 7302 cams)
|
| + or 180 (Philips SPC200NC / Philips SPC300NC) degrees
|
| +* Add support for Pixart custom JPEG format
|
| +* Hide non public symbols (Gregor Jasny)
|
| +* Fix and enable x86_64 asm jpeg decompress helper functions (Gregor Jasny)
|
| +
|
| +libv4l-0.4.0
|
| +------------
|
| +* Be more relaxed in our checks for mixing read and mmap access, we were
|
| + being more strict in this then certain kernel drivers (bttv) making xawtv
|
| + unhappy
|
| +* With some drivers the buffers must be mapped before queuing, so when
|
| + converting map the (real) buffers before calling the qbuf ioctl
|
| +* Add support for conversion to RGB24 (before we only supported BGR24) based
|
| + on a patch by Jean-Francois Moine
|
| +* When the hardware supports a format natively prefer using the native
|
| + version over converting from another supported format
|
| +* Various Makefile and pkgconfig file improvements by Gregor Jasny (Debian)
|
| +* Drop the appl-patches dir, all application patches are now available and
|
| + tracked here: http://linuxtv.org/v4lwiki/index.php/Libv4l_Progress
|
| +
|
| +
|
| +libv4l-0.3.9
|
| +------------
|
| +* Not only see /dev/video* but also /dev/v4l/* as video devices
|
| + (only affects libv4l1 and the wrappers) patch from Brandon Philips
|
| +* Silence the creation of the .pc files in the Makefiles (Brandon Philips)
|
| +* Part of the copyright headers refered GPL instead of LGPL due to a copy
|
| + and paste error (Brandon Philips)
|
| +
|
| +
|
| +libv4l-0.3.8
|
| +------------
|
| +* work around wrong REQUEST_BUFFERS ioctl return code from certain drivers
|
| +* add pkg-config (.pc) files for easier detection if libv4l is available
|
| +* check capabilities for streaming, if the driver cannot do streaming don't
|
| + insert ourselves between the application and the driver
|
| +* intercept get capabilites and report read capability (which we always offer)
|
| +* query buffer: indicate the mapping state of our (fake) buffer in the flags
|
| +
|
| +
|
| +libv4l-0.3.7
|
| +------------
|
| +* Add spca505/6 and spca508 cam specific formats (YUYV per line variations)
|
| +
|
| +
|
| +libv4l-0.3.6
|
| +------------
|
| +* Add missing COPYING.LIB file
|
| +
|
| +
|
| +libv4l-0.3.5
|
| +------------
|
| +* Make JPEG decoding more robust
|
| +
|
| +
|
| +libv4l-0.3.4 (the brownpaperbag release)
|
| +----------------------------------------
|
| +* The mmap64 support in 0.3.3, has caused a bug in libv4l1 when running on
|
| + 32 bit systems (who uses those now a days?), this bug caused v4l1
|
| + compatibility to not work at all, this release fixes this
|
| +* Some apps (xawtv, kopete) use an ioctl wrapper internally for various
|
| + reasons. This wrappers request argument is an int, but the real ioctl's
|
| + request argument is an unsigned long. Passing the VIDIOC_xxx defines through
|
| + to the wrapper, and then to the real ioctl, causes the request to get sign
|
| + extended on 64 bit args. The kernel seems to ignore the upper 32 bits,
|
| + causing the sign extension to not make a difference. libv4l now also
|
| + ignores the upper 32 bits of the libv4lx_ioctl request argument on 64 bit
|
| + archs
|
| +* Add a bugfix patch for kopete in the appl-patches dir, currently it assumes
|
| + that it got the width and height it asked for when doing a S_FMT, which is a
|
| + wrong assumption
|
| +
|
| +
|
| +libv4l-0.3.3
|
| +------------
|
| +* Add open64 and mmap64 wrappers to the LD_PRELOAD wrapper libs, so that
|
| + they also work for applications compiled with FILE_OFFSET_BITS=64, this
|
| + fixes using them with v4l-info
|
| +* While looking at xawtv in general, found a few bugs in xawtv itself, added
|
| + a patch to fix those to the appl-patches dir
|
| +* Talking about the appl-patches dir, restore that as it accidentally got
|
| + dropped from 0.3.2
|
| +* Be more verbose in various places when it comes to logging (esp errors)
|
| +* Change v4lconvert_enum_fmt code a bit, so that it is easier to add more
|
| + supported destination formats to libv4lconvert
|
| +* Don't return -EINVAL from try_fmt when we cannot convert because the cam
|
| + doesn't have any formats we know. Instead just return as format whatever the
|
| + cam returns from try_fmt, this new behavior is compliant with the v4l2
|
| + api as documented
|
| +
|
| +libv4l-0.3.2
|
| +------------
|
| +* Add support for converting from sn9c10x compressed data
|
| +* Add support for converting from pac207 compressed data
|
| +* Add "make install" Makefile target
|
| +
|
| +libv4l-0.3.1
|
| +------------
|
| +* Only serialize V4L2_BUF_TYPE_VIDEO_CAPTURE type ioctls
|
| +* Do not return an uninitialized variable as result code for GPICT
|
| + (fixes vlc, but see below)
|
| +* Add an apps-patches directory which includes:
|
| + * vlc-0.8.6-libv4l1.patch, modify vlc's v4l1 plugin to directly call into
|
| + libv4l1, in the end we want all apps todo this as its better then
|
| + LD_PRELOAD tricks, but for vlc this is needed as vlc's plugin system
|
| + causes LD_PRELOAD to not work on symbols in the plugins
|
| + * camorama-0.19-fixes.patch, small bugfixes to camorama's v4l1 support,
|
| + this patch only fixes _real_ bugs in camorama and does not change it to
|
| + work with v4l1compat. Although it does work better with these bugs fixed
|
| + :) With this patch and LD_PRELOAD=<path>/v4l1compat.so it works
|
| + flawless.
|
| +
|
| +
|
| +libv4l-0.3
|
| +----------
|
| +* add extern "C" magic to public header files for c++ usage (Gregor Jasny)
|
| +* Make libv4l1 and libv4l2 multithread use safe, see README.multi-threading
|
| +* Add v4lx_dup() calls (and intercept dup() from the wrappers) this fixes
|
| + use with gstreamer's v4l2 plugin (tested with cheese)
|
| +* Hopefully definitely fix compile errors on systems with a broken videodev2.h
|
| +
|
| +libv4l-0.2
|
| +----------
|
| +*** API change ***
|
| +* Change v4lconvert api so that the v4lconvert struct always gets allocated
|
| + by the library, this to make it opaque, so that we can avoid future API
|
| + and ABI changes
|
| +* Add support for yuv420 -> bgr24 conversion
|
| +* When converting from v4l2 pixelformat to v4l12 palette return
|
| + VIDEO_PALETTE_YUV420P instead of VIDEO_PALETTE_YUV420 for
|
| + V4L2_PIX_FMT_YUV420 as that is what most apps seem to expect
|
| +* override kernel v4l1 compat min / max size with our own more accurate values
|
| +* fix v4l1 munmap bug where it didn't recognise the buffer being unmapped was
|
| + our fake buffer (fixes gstreamer v4l1 support, checked with cheese)
|
| +* add support for reporting the emulated pixelformats with ENUM_FMT, this
|
| + defaults to off, and can be activated by passing a flag to enable it to
|
| + v4l2_fd_open. This gets enabled by default the wrappers.
|
| +* v4l2: mmap the real device buffers before doing conversion when DQBUF gets
|
| + called before the application has called mmap (avoid crash).
|
| +
|
| +
|
| +libv4l-0.1
|
| +----------
|
| +* major shuffle / rewrite now split into libv4l1, libv4l2, libv4lconvert
|
| + and 2 wrappers for binary compatibility
|
| +* rewritten LGPL bayer decoding
|
| +* many many other changes and fixes
|
| +
|
| +
|
| +v4l1-compat-0.6 (V4L2 apps stay working)
|
| +----------------------------------------
|
| +* Do not go into emulation mode of rgb24 immediately, but only after a
|
| + GPICT ioctl which has not been preceded by a SPICT ioctl, AKA do not get
|
| + in the way of V4L2 read calls by doing conversion on them
|
| +* Do not get in the way of mmap calls made by V4L2 applications
|
| +* Fix swapping of red and blue in bayer -> bgr24 decode routine
|
| +* Remember the v4l1 palette asked for with SPICT and return that, as
|
| + otherwise we loose information when going v4l1 -> v4l2 -> v4l1, for example
|
| + YUV420P becomes YUV420, which are separate in v4l1.
|
| +
|
| +
|
| +v4l1-compat-0.5 (perfect camorama)
|
| +----------------------------------
|
| +* Allow changing of format after the buffers have been mapped, by tearing
|
| + down the entire house, changing the fundament and then rebuilding it.
|
| + Now changing the capture resolution in camorama works!
|
| +* Fix jpeg decoding error reporting
|
| +* Allow jpeg's with a height which is a multiple of 8 (was 16)
|
| +* Remove a number of pretty new VIDIOCXXX -> string mappings from log.c,
|
| + fixing compiling with somewhat older kernels
|
| +
|
| +
|
| +v4l1-compat 0.4
|
| +---------------
|
| +* Do not even try to change the format in v4l1_compat_set_format(), unless
|
| + _really_ necessary.
|
| +* Cleanup ambigious use of src_format (no functional changes)
|
| +* Drop the mmap hack for zerocopy access under certain conditions, one of them
|
| + that the cam can deliver the requested format. Although avoiding the
|
| + memcpy in this scenarios is a good thing todo, there were several issues
|
| + with the 0.3 implementation of this, fixing all these means adding lots of
|
| + special cases all over the code. So instead we just drop support and
|
| + always do atleast a memcpy (or a conversion). If an application cannot
|
| + live with the speed penalty this imposes it should be ported to v4l2.
|
| +* Now that we've gotten rid of the zerocopy mmap hack, we can safely allow
|
| + mixing read and mmap based IO.
|
| +* Explictly include linux/ioctl.h, to fix compile with kernel headers where
|
| + linux/videodev.h doesn't.
|
| +
|
| +
|
| +v4l1-compat 0.3
|
| +---------------
|
| +* Don't allow multiple opens, in theory our code can handle it, but not all
|
| + v4l2 devices like it (ekiga does it and uvc doesn't like it).
|
| +
|
| +
|
| +v4l1-compat 0.2
|
| +---------------
|
| +* When mmap gets passed an fd of -1 (anonymous map) don't look for it in our
|
| + list of managed fds, as we use -1 to mark unused entries (fixes ekiga
|
| + crashing). Also check for an fd of -1 in the other calls we intercept.
|
| +* In close() start with removing the fd from our list of managed fds, this must
|
| + be done first, because as soon as we've done the actual close syscall, the
|
| + fd maybe returned by an open in another thread and we don't want to intercept
|
| + calls to this new fd.
|
| +* Make unknown v4l1 palette types a normal level log messages instead of an
|
| + error.
|
| +* When an applicaiton changes the width / height through the CMCAPTURE ioctl
|
| + remember the new width and height.
|
| +* If the devices initial v4l2 pixformat has no corresponding v4l1 palette, try
|
| + setting a format which does (and which we emulate when necessary) so that
|
| + applicactions which just query the current format (GPICT) and then take
|
| + whatever they get will work (partially fixes camorama)
|
| +* Implement our own SWIN instead of using kernel compat layer, for more
|
| + flexibility and better error checking
|
| +
|
| +
|
| +v4l1-compat 0.1
|
| +---------------
|
| +* Initial public release.
|
|
|
Chromium Code Reviews
Issue 739613004:
Add v4l-utils to chromium third_party (Closed)
Base URL: https://chromium.googlesource.com/chromium/src.git@master