Get `gn gen` to succeed on Windows

third_party/sqlite/src/src/sqliteInt.h

+/*
+** 2001 September 15
+**
+** The author disclaims copyright to this source code.  In place of
+** a legal notice, here is a blessing:
+**
+**    May you do good and not evil.
+**    May you find forgiveness for yourself and forgive others.
+**    May you share freely, never taking more than you give.
+**
+*************************************************************************
+** Internal interface definitions for SQLite.
+**
+*/
+#ifndef _SQLITEINT_H_
+#define _SQLITEINT_H_
+
+/*
+** These #defines should enable >2GB file support on POSIX if the
+** underlying operating system supports it.  If the OS lacks
+** large file support, or if the OS is windows, these should be no-ops.
+**
+** Ticket #2739:  The _LARGEFILE_SOURCE macro must appear before any
+** system #includes.  Hence, this block of code must be the very first
+** code in all source files.
+**
+** Large file support can be disabled using the -DSQLITE_DISABLE_LFS switch
+** on the compiler command line.  This is necessary if you are compiling
+** on a recent machine (ex: Red Hat 7.2) but you want your code to work
+** on an older machine (ex: Red Hat 6.0).  If you compile on Red Hat 7.2
+** without this option, LFS is enable.  But LFS does not exist in the kernel
+** in Red Hat 6.0, so the code won't work.  Hence, for maximum binary
+** portability you should omit LFS.
+**
+** Similar is true for Mac OS X.  LFS is only supported on Mac OS X 9 and later.
+*/
+#ifndef SQLITE_DISABLE_LFS
+# define _LARGE_FILE       1
+# ifndef _FILE_OFFSET_BITS
+#   define _FILE_OFFSET_BITS 64
+# endif
+# define _LARGEFILE_SOURCE 1
+#endif
+
+/*
+** Include the configuration header output by 'configure' if we're using the
+** autoconf-based build
+*/
+#ifdef _HAVE_SQLITE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "sqliteLimit.h"
+
+/* Disable nuisance warnings on Borland compilers */
+#if defined(__BORLANDC__)
+#pragma warn -rch /* unreachable code */
+#pragma warn -ccc /* Condition is always true or false */
+#pragma warn -aus /* Assigned value is never used */
+#pragma warn -csu /* Comparing signed and unsigned */
+#pragma warn -spa /* Suspicious pointer arithmetic */
+#endif
+
+/* Needed for various definitions... */
+#ifndef _GNU_SOURCE
+# define _GNU_SOURCE
+#endif
+
+/*
+** Include standard header files as necessary
+*/
+#ifdef HAVE_STDINT_H
+#include <stdint.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+#include <inttypes.h>
+#endif
+
+/*
+** The number of samples of an index that SQLite takes in order to 
+** construct a histogram of the table content when running ANALYZE
+** and with SQLITE_ENABLE_STAT2
+*/
+#define SQLITE_INDEX_SAMPLES 10
+
+/*
+** The following macros are used to cast pointers to integers and
+** integers to pointers.  The way you do this varies from one compiler
+** to the next, so we have developed the following set of #if statements
+** to generate appropriate macros for a wide range of compilers.
+**
+** The correct "ANSI" way to do this is to use the intptr_t type. 
+** Unfortunately, that typedef is not available on all compilers, or
+** if it is available, it requires an #include of specific headers
+** that vary from one machine to the next.
+**
+** Ticket #3860:  The llvm-gcc-4.2 compiler from Apple chokes on
+** the ((void*)&((char*)0)[X]) construct.  But MSVC chokes on ((void*)(X)).
+** So we have to define the macros in different ways depending on the
+** compiler.
+*/
+#if defined(__PTRDIFF_TYPE__)  /* This case should work for GCC */
+# define SQLITE_INT_TO_PTR(X)  ((void*)(__PTRDIFF_TYPE__)(X))
+# define SQLITE_PTR_TO_INT(X)  ((int)(__PTRDIFF_TYPE__)(X))
+#elif !defined(__GNUC__)       /* Works for compilers other than LLVM */
+# define SQLITE_INT_TO_PTR(X)  ((void*)&((char*)0)[X])
+# define SQLITE_PTR_TO_INT(X)  ((int)(((char*)X)-(char*)0))
+#elif defined(HAVE_STDINT_H)   /* Use this case if we have ANSI headers */
+# define SQLITE_INT_TO_PTR(X)  ((void*)(intptr_t)(X))
+# define SQLITE_PTR_TO_INT(X)  ((int)(intptr_t)(X))
+#else                          /* Generates a warning - but it always works */
+# define SQLITE_INT_TO_PTR(X)  ((void*)(X))
+# define SQLITE_PTR_TO_INT(X)  ((int)(X))
+#endif
+
+/*
+** The SQLITE_THREADSAFE macro must be defined as 0, 1, or 2.
+** 0 means mutexes are permanently disable and the library is never
+** threadsafe.  1 means the library is serialized which is the highest
+** level of threadsafety.  2 means the libary is multithreaded - multiple
+** threads can use SQLite as long as no two threads try to use the same
+** database connection at the same time.
+**
+** Older versions of SQLite used an optional THREADSAFE macro.
+** We support that for legacy.
+*/
+#if !defined(SQLITE_THREADSAFE)
+#if defined(THREADSAFE)
+# define SQLITE_THREADSAFE THREADSAFE
+#else
+# define SQLITE_THREADSAFE 1 /* IMP: R-07272-22309 */
+#endif
+#endif
+
+/*
+** The SQLITE_DEFAULT_MEMSTATUS macro must be defined as either 0 or 1.
+** It determines whether or not the features related to 
+** SQLITE_CONFIG_MEMSTATUS are available by default or not. This value can
+** be overridden at runtime using the sqlite3_config() API.
+*/
+#if !defined(SQLITE_DEFAULT_MEMSTATUS)
+# define SQLITE_DEFAULT_MEMSTATUS 1
+#endif
+
+/*
+** Exactly one of the following macros must be defined in order to
+** specify which memory allocation subsystem to use.
+**
+**     SQLITE_SYSTEM_MALLOC          // Use normal system malloc()
+**     SQLITE_MEMDEBUG               // Debugging version of system malloc()
+**
+** (Historical note:  There used to be several other options, but we've
+** pared it down to just these two.)
+**
+** If none of the above are defined, then set SQLITE_SYSTEM_MALLOC as
+** the default.
+*/
+#if defined(SQLITE_SYSTEM_MALLOC)+defined(SQLITE_MEMDEBUG)>1
+# error "At most one of the following compile-time configuration options\
+ is allows: SQLITE_SYSTEM_MALLOC, SQLITE_MEMDEBUG"
+#endif
+#if defined(SQLITE_SYSTEM_MALLOC)+defined(SQLITE_MEMDEBUG)==0
+# define SQLITE_SYSTEM_MALLOC 1
+#endif
+
+/*
+** If SQLITE_MALLOC_SOFT_LIMIT is not zero, then try to keep the
+** sizes of memory allocations below this value where possible.
+*/
+#if !defined(SQLITE_MALLOC_SOFT_LIMIT)
+# define SQLITE_MALLOC_SOFT_LIMIT 1024
+#endif
+
+/*
+** We need to define _XOPEN_SOURCE as follows in order to enable
+** recursive mutexes on most Unix systems.  But Mac OS X is different.
+** The _XOPEN_SOURCE define causes problems for Mac OS X we are told,
+** so it is omitted there.  See ticket #2673.
+**
+** Later we learn that _XOPEN_SOURCE is poorly or incorrectly
+** implemented on some systems.  So we avoid defining it at all
+** if it is already defined or if it is unneeded because we are
+** not doing a threadsafe build.  Ticket #2681.
+**
+** See also ticket #2741.
+*/
+#if !defined(_XOPEN_SOURCE) && !defined(__DARWIN__) && !defined(__APPLE__) && SQLITE_THREADSAFE
+#  define _XOPEN_SOURCE 500  /* Needed to enable pthread recursive mutexes */
+#endif
+
+/*
+** The TCL headers are only needed when compiling the TCL bindings.
+*/
+#if defined(SQLITE_TCL) || defined(TCLSH)
+# include <tcl.h>
+#endif
+
+/*
+** Many people are failing to set -DNDEBUG=1 when compiling SQLite.
+** Setting NDEBUG makes the code smaller and run faster.  So the following
+** lines are added to automatically set NDEBUG unless the -DSQLITE_DEBUG=1
+** option is set.  Thus NDEBUG becomes an opt-in rather than an opt-out
+** feature.
+*/
+#if !defined(NDEBUG) && !defined(SQLITE_DEBUG) 
+# define NDEBUG 1
+#endif
+
+/*
+** The testcase() macro is used to aid in coverage testing.  When 
+** doing coverage testing, the condition inside the argument to
+** testcase() must be evaluated both true and false in order to
+** get full branch coverage.  The testcase() macro is inserted
+** to help ensure adequate test coverage in places where simple
+** condition/decision coverage is inadequate.  For example, testcase()
+** can be used to make sure boundary values are tested.  For
+** bitmask tests, testcase() can be used to make sure each bit
+** is significant and used at least once.  On switch statements
+** where multiple cases go to the same block of code, testcase()
+** can insure that all cases are evaluated.
+**
+*/
+#ifdef SQLITE_COVERAGE_TEST
+  void sqlite3Coverage(int);
+# define testcase(X)  if( X ){ sqlite3Coverage(__LINE__); }
+#else
+# define testcase(X)
+#endif
+
+/*
+** The TESTONLY macro is used to enclose variable declarations or
+** other bits of code that are needed to support the arguments
+** within testcase() and assert() macros.
+*/
+#if !defined(NDEBUG) || defined(SQLITE_COVERAGE_TEST)
+# define TESTONLY(X)  X
+#else
+# define TESTONLY(X)
+#endif
+
+/*
+** Sometimes we need a small amount of code such as a variable initialization
+** to setup for a later assert() statement.  We do not want this code to
+** appear when assert() is disabled.  The following macro is therefore
+** used to contain that setup code.  The "VVA" acronym stands for
+** "Verification, Validation, and Accreditation".  In other words, the
+** code within VVA_ONLY() will only run during verification processes.
+*/
+#ifndef NDEBUG
+# define VVA_ONLY(X)  X
+#else
+# define VVA_ONLY(X)
+#endif
+
+/*
+** The ALWAYS and NEVER macros surround boolean expressions which 
+** are intended to always be true or false, respectively.  Such
+** expressions could be omitted from the code completely.  But they
+** are included in a few cases in order to enhance the resilience
+** of SQLite to unexpected behavior - to make the code "self-healing"
+** or "ductile" rather than being "brittle" and crashing at the first
+** hint of unplanned behavior.
+**
+** In other words, ALWAYS and NEVER are added for defensive code.
+**
+** When doing coverage testing ALWAYS and NEVER are hard-coded to
+** be true and false so that the unreachable code then specify will
+** not be counted as untested code.
+*/
+#if defined(SQLITE_COVERAGE_TEST)
+# define ALWAYS(X)      (1)
+# define NEVER(X)       (0)
+#elif !defined(NDEBUG)
+# define ALWAYS(X)      ((X)?1:(assert(0),0))
+# define NEVER(X)       ((X)?(assert(0),1):0)
+#else
+# define ALWAYS(X)      (X)
+# define NEVER(X)       (X)
+#endif
+
+/*
+** Return true (non-zero) if the input is a integer that is too large
+** to fit in 32-bits.  This macro is used inside of various testcase()
+** macros to verify that we have tested SQLite for large-file support.
+*/
+#define IS_BIG_INT(X)  (((X)&~(i64)0xffffffff)!=0)
+
+/*
+** The macro unlikely() is a hint that surrounds a boolean
+** expression that is usually false.  Macro likely() surrounds
+** a boolean expression that is usually true.  GCC is able to
+** use these hints to generate better code, sometimes.
+*/
+#if defined(__GNUC__) && 0
+# define likely(X)    __builtin_expect((X),1)
+# define unlikely(X)  __builtin_expect((X),0)
+#else
+# define likely(X)    !!(X)
+# define unlikely(X)  !!(X)
+#endif
+
+#include "sqlite3.h"
+#include "hash.h"
+#include "parse.h"
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <assert.h>
+#include <stddef.h>
+
+/*
+** If compiling for a processor that lacks floating point support,
+** substitute integer for floating-point
+*/
+#ifdef SQLITE_OMIT_FLOATING_POINT
+# define double sqlite_int64
+# define float sqlite_int64
+# define LONGDOUBLE_TYPE sqlite_int64
+# ifndef SQLITE_BIG_DBL
+#   define SQLITE_BIG_DBL (((sqlite3_int64)1)<<50)
+# endif
+# define SQLITE_OMIT_DATETIME_FUNCS 1
+# define SQLITE_OMIT_TRACE 1
+# undef SQLITE_MIXED_ENDIAN_64BIT_FLOAT
+# undef SQLITE_HAVE_ISNAN
+#endif
+#ifndef SQLITE_BIG_DBL
+# define SQLITE_BIG_DBL (1e99)
+#endif
+
+/*
+** OMIT_TEMPDB is set to 1 if SQLITE_OMIT_TEMPDB is defined, or 0
+** afterward. Having this macro allows us to cause the C compiler 
+** to omit code used by TEMP tables without messy #ifndef statements.
+*/
+#ifdef SQLITE_OMIT_TEMPDB
+#define OMIT_TEMPDB 1
+#else
+#define OMIT_TEMPDB 0
+#endif
+
+/*
+** The "file format" number is an integer that is incremented whenever
+** the VDBE-level file format changes.  The following macros define the
+** the default file format for new databases and the maximum file format
+** that the library can read.
+*/
+#define SQLITE_MAX_FILE_FORMAT 4
+#ifndef SQLITE_DEFAULT_FILE_FORMAT
+# define SQLITE_DEFAULT_FILE_FORMAT 1
+#endif
+
+/*
+** Determine whether triggers are recursive by default.  This can be
+** changed at run-time using a pragma.
+*/
+#ifndef SQLITE_DEFAULT_RECURSIVE_TRIGGERS
+# define SQLITE_DEFAULT_RECURSIVE_TRIGGERS 0
+#endif
+
+/*
+** Provide a default value for SQLITE_TEMP_STORE in case it is not specified
+** on the command-line
+*/
+#ifndef SQLITE_TEMP_STORE
+# define SQLITE_TEMP_STORE 1
+#endif
+
+/*
+** GCC does not define the offsetof() macro so we'll have to do it
+** ourselves.
+*/
+#ifndef offsetof
+#define offsetof(STRUCTURE,FIELD) ((int)((char*)&((STRUCTURE*)0)->FIELD))
+#endif
+
+/*
+** Check to see if this machine uses EBCDIC.  (Yes, believe it or
+** not, there are still machines out there that use EBCDIC.)
+*/
+#if 'A' == '\301'
+# define SQLITE_EBCDIC 1
+#else
+# define SQLITE_ASCII 1
+#endif
+
+/*
+** Integers of known sizes.  These typedefs might change for architectures
+** where the sizes very.  Preprocessor macros are available so that the
+** types can be conveniently redefined at compile-type.  Like this:
+**
+**         cc '-DUINTPTR_TYPE=long long int' ...
+*/
+#ifndef UINT32_TYPE
+# ifdef HAVE_UINT32_T
+#  define UINT32_TYPE uint32_t
+# else
+#  define UINT32_TYPE unsigned int
+# endif
+#endif
+#ifndef UINT16_TYPE
+# ifdef HAVE_UINT16_T
+#  define UINT16_TYPE uint16_t
+# else
+#  define UINT16_TYPE unsigned short int
+# endif
+#endif
+#ifndef INT16_TYPE
+# ifdef HAVE_INT16_T
+#  define INT16_TYPE int16_t
+# else
+#  define INT16_TYPE short int
+# endif
+#endif
+#ifndef UINT8_TYPE
+# ifdef HAVE_UINT8_T
+#  define UINT8_TYPE uint8_t
+# else
+#  define UINT8_TYPE unsigned char
+# endif
+#endif
+#ifndef INT8_TYPE
+# ifdef HAVE_INT8_T
+#  define INT8_TYPE int8_t
+# else
+#  define INT8_TYPE signed char
+# endif
+#endif
+#ifndef LONGDOUBLE_TYPE
+# define LONGDOUBLE_TYPE long double
+#endif
+typedef sqlite_int64 i64;          /* 8-byte signed integer */
+typedef sqlite_uint64 u64;         /* 8-byte unsigned integer */
+typedef UINT32_TYPE u32;           /* 4-byte unsigned integer */
+typedef UINT16_TYPE u16;           /* 2-byte unsigned integer */
+typedef INT16_TYPE i16;            /* 2-byte signed integer */
+typedef UINT8_TYPE u8;             /* 1-byte unsigned integer */
+typedef INT8_TYPE i8;              /* 1-byte signed integer */
+
+/*
+** SQLITE_MAX_U32 is a u64 constant that is the maximum u64 value
+** that can be stored in a u32 without loss of data.  The value
+** is 0x00000000ffffffff.  But because of quirks of some compilers, we
+** have to specify the value in the less intuitive manner shown:
+*/
+#define SQLITE_MAX_U32  ((((u64)1)<<32)-1)
+
+/*
+** Macros to determine whether the machine is big or little endian,
+** evaluated at runtime.
+*/
+#ifdef SQLITE_AMALGAMATION
+const int sqlite3one = 1;
+#else
+extern const int sqlite3one;
+#endif
+#if defined(i386) || defined(__i386__) || defined(_M_IX86)\
+                             || defined(__x86_64) || defined(__x86_64__)
+# define SQLITE_BIGENDIAN    0
+# define SQLITE_LITTLEENDIAN 1
+# define SQLITE_UTF16NATIVE  SQLITE_UTF16LE
+#else
+# define SQLITE_BIGENDIAN    (*(char *)(&sqlite3one)==0)
+# define SQLITE_LITTLEENDIAN (*(char *)(&sqlite3one)==1)
+# define SQLITE_UTF16NATIVE (SQLITE_BIGENDIAN?SQLITE_UTF16BE:SQLITE_UTF16LE)
+#endif
+
+/*
+** Constants for the largest and smallest possible 64-bit signed integers.
+** These macros are designed to work correctly on both 32-bit and 64-bit
+** compilers.
+*/
+#define LARGEST_INT64  (0xffffffff|(((i64)0x7fffffff)<<32))
+#define SMALLEST_INT64 (((i64)-1) - LARGEST_INT64)
+
+/* 
+** Round up a number to the next larger multiple of 8.  This is used
+** to force 8-byte alignment on 64-bit architectures.
+*/
+#define ROUND8(x)     (((x)+7)&~7)
+
+/*
+** Round down to the nearest multiple of 8
+*/
+#define ROUNDDOWN8(x) ((x)&~7)
+
+/*
+** Assert that the pointer X is aligned to an 8-byte boundary.  This
+** macro is used only within assert() to verify that the code gets
+** all alignment restrictions correct.
+**
+** Except, if SQLITE_4_BYTE_ALIGNED_MALLOC is defined, then the
+** underlying malloc() implemention might return us 4-byte aligned
+** pointers.  In that case, only verify 4-byte alignment.
+*/
+#ifdef SQLITE_4_BYTE_ALIGNED_MALLOC
+# define EIGHT_BYTE_ALIGNMENT(X)   ((((char*)(X) - (char*)0)&3)==0)
+#else
+# define EIGHT_BYTE_ALIGNMENT(X)   ((((char*)(X) - (char*)0)&7)==0)
+#endif
+
+
+/*
+** An instance of the following structure is used to store the busy-handler
+** callback for a given sqlite handle. 
+**
+** The sqlite.busyHandler member of the sqlite struct contains the busy
+** callback for the database handle. Each pager opened via the sqlite
+** handle is passed a pointer to sqlite.busyHandler. The busy-handler
+** callback is currently invoked only from within pager.c.
+*/
+typedef struct BusyHandler BusyHandler;
+struct BusyHandler {
+  int (*xFunc)(void *,int);  /* The busy callback */
+  void *pArg;                /* First arg to busy callback */
+  int nBusy;                 /* Incremented with each busy call */
+};
+
+/*
+** Name of the master database table.  The master database table
+** is a special table that holds the names and attributes of all
+** user tables and indices.
+*/
+#define MASTER_NAME       "sqlite_master"
+#define TEMP_MASTER_NAME  "sqlite_temp_master"
+
+/*
+** The root-page of the master database table.
+*/
+#define MASTER_ROOT       1
+
+/*
+** The name of the schema table.
+*/
+#define SCHEMA_TABLE(x)  ((!OMIT_TEMPDB)&&(x==1)?TEMP_MASTER_NAME:MASTER_NAME)
+
+/*
+** A convenience macro that returns the number of elements in
+** an array.
+*/
+#define ArraySize(X)    ((int)(sizeof(X)/sizeof(X[0])))
+
+/*
+** The following value as a destructor means to use sqlite3DbFree().
+** This is an internal extension to SQLITE_STATIC and SQLITE_TRANSIENT.
+*/
+#define SQLITE_DYNAMIC   ((sqlite3_destructor_type)sqlite3DbFree)
+
+/*
+** When SQLITE_OMIT_WSD is defined, it means that the target platform does
+** not support Writable Static Data (WSD) such as global and static variables.
+** All variables must either be on the stack or dynamically allocated from
+** the heap.  When WSD is unsupported, the variable declarations scattered
+** throughout the SQLite code must become constants instead.  The SQLITE_WSD
+** macro is used for this purpose.  And instead of referencing the variable
+** directly, we use its constant as a key to lookup the run-time allocated
+** buffer that holds real variable.  The constant is also the initializer
+** for the run-time allocated buffer.
+**
+** In the usual case where WSD is supported, the SQLITE_WSD and GLOBAL
+** macros become no-ops and have zero performance impact.
+*/
+#ifdef SQLITE_OMIT_WSD
+  #define SQLITE_WSD const
+  #define GLOBAL(t,v) (*(t*)sqlite3_wsd_find((void*)&(v), sizeof(v)))
+  #define sqlite3GlobalConfig GLOBAL(struct Sqlite3Config, sqlite3Config)
+  int sqlite3_wsd_init(int N, int J);
+  void *sqlite3_wsd_find(void *K, int L);
+#else
+  #define SQLITE_WSD 
+  #define GLOBAL(t,v) v
+  #define sqlite3GlobalConfig sqlite3Config
+#endif
+
+/*
+** The following macros are used to suppress compiler warnings and to
+** make it clear to human readers when a function parameter is deliberately 
+** left unused within the body of a function. This usually happens when
+** a function is called via a function pointer. For example the 
+** implementation of an SQL aggregate step callback may not use the
+** parameter indicating the number of arguments passed to the aggregate,
+** if it knows that this is enforced elsewhere.
+**
+** When a function parameter is not used at all within the body of a function,
+** it is generally named "NotUsed" or "NotUsed2" to make things even clearer.
+** However, these macros may also be used to suppress warnings related to
+** parameters that may or may not be used depending on compilation options.
+** For example those parameters only used in assert() statements. In these
+** cases the parameters are named as per the usual conventions.
+*/
+#define UNUSED_PARAMETER(x) (void)(x)
+#define UNUSED_PARAMETER2(x,y) UNUSED_PARAMETER(x),UNUSED_PARAMETER(y)
+
+/*
+** Forward references to structures
+*/
+typedef struct AggInfo AggInfo;
+typedef struct AuthContext AuthContext;
+typedef struct AutoincInfo AutoincInfo;
+typedef struct Bitvec Bitvec;
+typedef struct CollSeq CollSeq;
+typedef struct Column Column;
+typedef struct Db Db;
+typedef struct Schema Schema;
+typedef struct Expr Expr;
+typedef struct ExprList ExprList;
+typedef struct ExprSpan ExprSpan;
+typedef struct FKey FKey;
+typedef struct FuncDestructor FuncDestructor;
+typedef struct FuncDef FuncDef;
+typedef struct FuncDefHash FuncDefHash;
+typedef struct IdList IdList;
+typedef struct Index Index;
+typedef struct IndexSample IndexSample;
+typedef struct KeyClass KeyClass;
+typedef struct KeyInfo KeyInfo;
+typedef struct Lookaside Lookaside;
+typedef struct LookasideSlot LookasideSlot;
+typedef struct Module Module;
+typedef struct NameContext NameContext;
+typedef struct Parse Parse;
+typedef struct RowSet RowSet;
+typedef struct Savepoint Savepoint;
+typedef struct Select Select;
+typedef struct SrcList SrcList;
+typedef struct StrAccum StrAccum;
+typedef struct Table Table;
+typedef struct TableLock TableLock;
+typedef struct Token Token;
+typedef struct Trigger Trigger;
+typedef struct TriggerPrg TriggerPrg;
+typedef struct TriggerStep TriggerStep;
+typedef struct UnpackedRecord UnpackedRecord;
+typedef struct VTable VTable;
+typedef struct Walker Walker;
+typedef struct WherePlan WherePlan;
+typedef struct WhereInfo WhereInfo;
+typedef struct WhereLevel WhereLevel;
+
+/*
+** Defer sourcing vdbe.h and btree.h until after the "u8" and 
+** "BusyHandler" typedefs. vdbe.h also requires a few of the opaque
+** pointer types (i.e. FuncDef) defined above.
+*/
+#include "btree.h"
+#include "vdbe.h"
+#include "pager.h"
+#include "pcache.h"
+
+#include "os.h"
+#include "mutex.h"
+
+
+/*
+** Each database file to be accessed by the system is an instance
+** of the following structure.  There are normally two of these structures
+** in the sqlite.aDb[] array.  aDb[0] is the main database file and
+** aDb[1] is the database file used to hold temporary tables.  Additional
+** databases may be attached.
+*/
+struct Db {
+  char *zName;         /* Name of this database */
+  Btree *pBt;          /* The B*Tree structure for this database file */
+  u8 inTrans;          /* 0: not writable.  1: Transaction.  2: Checkpoint */
+  u8 safety_level;     /* How aggressive at syncing data to disk */
+  Schema *pSchema;     /* Pointer to database schema (possibly shared) */
+};
+
+/*
+** An instance of the following structure stores a database schema.
+**
+** Most Schema objects are associated with a Btree.  The exception is
+** the Schema for the TEMP databaes (sqlite3.aDb[1]) which is free-standing.
+** In shared cache mode, a single Schema object can be shared by multiple
+** Btrees that refer to the same underlying BtShared object.
+** 
+** Schema objects are automatically deallocated when the last Btree that
+** references them is destroyed.   The TEMP Schema is manually freed by
+** sqlite3_close().
+*
+** A thread must be holding a mutex on the corresponding Btree in order
+** to access Schema content.  This implies that the thread must also be
+** holding a mutex on the sqlite3 connection pointer that owns the Btree.
+** For a TEMP Schema, on the connection mutex is required.
+*/
+struct Schema {
+  int schema_cookie;   /* Database schema version number for this file */
+  int iGeneration;     /* Generation counter.  Incremented with each change */
+  Hash tblHash;        /* All tables indexed by name */
+  Hash idxHash;        /* All (named) indices indexed by name */
+  Hash trigHash;       /* All triggers indexed by name */
+  Hash fkeyHash;       /* All foreign keys by referenced table name */
+  Table *pSeqTab;      /* The sqlite_sequence table used by AUTOINCREMENT */
+  u8 file_format;      /* Schema format version for this file */
+  u8 enc;              /* Text encoding used by this database */
+  u16 flags;           /* Flags associated with this schema */
+  int cache_size;      /* Number of pages to use in the cache */
+};
+
+/*
+** These macros can be used to test, set, or clear bits in the 
+** Db.pSchema->flags field.
+*/
+#define DbHasProperty(D,I,P)     (((D)->aDb[I].pSchema->flags&(P))==(P))
+#define DbHasAnyProperty(D,I,P)  (((D)->aDb[I].pSchema->flags&(P))!=0)
+#define DbSetProperty(D,I,P)     (D)->aDb[I].pSchema->flags|=(P)
+#define DbClearProperty(D,I,P)   (D)->aDb[I].pSchema->flags&=~(P)
+
+/*
+** Allowed values for the DB.pSchema->flags field.
+**
+** The DB_SchemaLoaded flag is set after the database schema has been
+** read into internal hash tables.
+**
+** DB_UnresetViews means that one or more views have column names that
+** have been filled out.  If the schema changes, these column names might
+** changes and so the view will need to be reset.
+*/
+#define DB_SchemaLoaded    0x0001  /* The schema has been loaded */
+#define DB_UnresetViews    0x0002  /* Some views have defined column names */
+#define DB_Empty           0x0004  /* The file is empty (length 0 bytes) */
+
+/*
+** The number of different kinds of things that can be limited
+** using the sqlite3_limit() interface.
+*/
+#define SQLITE_N_LIMIT (SQLITE_LIMIT_TRIGGER_DEPTH+1)
+
+/*
+** Lookaside malloc is a set of fixed-size buffers that can be used
+** to satisfy small transient memory allocation requests for objects
+** associated with a particular database connection.  The use of
+** lookaside malloc provides a significant performance enhancement
+** (approx 10%) by avoiding numerous malloc/free requests while parsing
+** SQL statements.
+**
+** The Lookaside structure holds configuration information about the
+** lookaside malloc subsystem.  Each available memory allocation in
+** the lookaside subsystem is stored on a linked list of LookasideSlot
+** objects.
+**
+** Lookaside allocations are only allowed for objects that are associated
+** with a particular database connection.  Hence, schema information cannot
+** be stored in lookaside because in shared cache mode the schema information
+** is shared by multiple database connections.  Therefore, while parsing
+** schema information, the Lookaside.bEnabled flag is cleared so that
+** lookaside allocations are not used to construct the schema objects.
+*/
+struct Lookaside {
+  u16 sz;                 /* Size of each buffer in bytes */
+  u8 bEnabled;            /* False to disable new lookaside allocations */
+  u8 bMalloced;           /* True if pStart obtained from sqlite3_malloc() */
+  int nOut;               /* Number of buffers currently checked out */
+  int mxOut;              /* Highwater mark for nOut */
+  int anStat[3];          /* 0: hits.  1: size misses.  2: full misses */
+  LookasideSlot *pFree;   /* List of available buffers */
+  void *pStart;           /* First byte of available memory space */
+  void *pEnd;             /* First byte past end of available space */
+};
+struct LookasideSlot {
+  LookasideSlot *pNext;    /* Next buffer in the list of free buffers */
+};
+
+/*
+** A hash table for function definitions.
+**
+** Hash each FuncDef structure into one of the FuncDefHash.a[] slots.
+** Collisions are on the FuncDef.pHash chain.
+*/
+struct FuncDefHash {
+  FuncDef *a[23];       /* Hash table for functions */
+};
+
+/*
+** Each database connection is an instance of the following structure.
+**
+** The sqlite.lastRowid records the last insert rowid generated by an
+** insert statement.  Inserts on views do not affect its value.  Each
+** trigger has its own context, so that lastRowid can be updated inside
+** triggers as usual.  The previous value will be restored once the trigger
+** exits.  Upon entering a before or instead of trigger, lastRowid is no
+** longer (since after version 2.8.12) reset to -1.
+**
+** The sqlite.nChange does not count changes within triggers and keeps no
+** context.  It is reset at start of sqlite3_exec.
+** The sqlite.lsChange represents the number of changes made by the last
+** insert, update, or delete statement.  It remains constant throughout the
+** length of a statement and is then updated by OP_SetCounts.  It keeps a
+** context stack just like lastRowid so that the count of changes
+** within a trigger is not seen outside the trigger.  Changes to views do not
+** affect the value of lsChange.
+** The sqlite.csChange keeps track of the number of current changes (since
+** the last statement) and is used to update sqlite_lsChange.
+**
+** The member variables sqlite.errCode, sqlite.zErrMsg and sqlite.zErrMsg16
+** store the most recent error code and, if applicable, string. The
+** internal function sqlite3Error() is used to set these variables
+** consistently.
+*/
+struct sqlite3 {
+  sqlite3_vfs *pVfs;            /* OS Interface */
+  int nDb;                      /* Number of backends currently in use */
+  Db *aDb;                      /* All backends */
+  int flags;                    /* Miscellaneous flags. See below */
+  int openFlags;                /* Flags passed to sqlite3_vfs.xOpen() */
+  int errCode;                  /* Most recent error code (SQLITE_*) */
+  int errMask;                  /* & result codes with this before returning */
+  u8 autoCommit;                /* The auto-commit flag. */
+  u8 temp_store;                /* 1: file 2: memory 0: default */
+  u8 mallocFailed;              /* True if we have seen a malloc failure */
+  u8 dfltLockMode;              /* Default locking-mode for attached dbs */
+  signed char nextAutovac;      /* Autovac setting after VACUUM if >=0 */
+  u8 suppressErr;               /* Do not issue error messages if true */
+  int nextPagesize;             /* Pagesize after VACUUM if >0 */
+  int nTable;                   /* Number of tables in the database */
+  CollSeq *pDfltColl;           /* The default collating sequence (BINARY) */
+  i64 lastRowid;                /* ROWID of most recent insert (see above) */
+  u32 magic;                    /* Magic number for detect library misuse */
+  int nChange;                  /* Value returned by sqlite3_changes() */
+  int nTotalChange;             /* Value returned by sqlite3_total_changes() */
+  sqlite3_mutex *mutex;         /* Connection mutex */
+  int aLimit[SQLITE_N_LIMIT];   /* Limits */
+  struct sqlite3InitInfo {      /* Information used during initialization */
+    int iDb;                    /* When back is being initialized */
+    int newTnum;                /* Rootpage of table being initialized */
+    u8 busy;                    /* TRUE if currently initializing */
+    u8 orphanTrigger;           /* Last statement is orphaned TEMP trigger */
+  } init;
+  int nExtension;               /* Number of loaded extensions */
+  void **aExtension;            /* Array of shared library handles */
+  struct Vdbe *pVdbe;           /* List of active virtual machines */
+  int activeVdbeCnt;            /* Number of VDBEs currently executing */
+  int writeVdbeCnt;             /* Number of active VDBEs that are writing */
+  int vdbeExecCnt;              /* Number of nested calls to VdbeExec() */
+  void (*xTrace)(void*,const char*);        /* Trace function */
+  void *pTraceArg;                          /* Argument to the trace function */
+  void (*xProfile)(void*,const char*,u64);  /* Profiling function */
+  void *pProfileArg;                        /* Argument to profile function */
+  void *pCommitArg;                 /* Argument to xCommitCallback() */   
+  int (*xCommitCallback)(void*);    /* Invoked at every commit. */
+  void *pRollbackArg;               /* Argument to xRollbackCallback() */   
+  void (*xRollbackCallback)(void*); /* Invoked at every commit. */
+  void *pUpdateArg;
+  void (*xUpdateCallback)(void*,int, const char*,const char*,sqlite_int64);
+#ifndef SQLITE_OMIT_WAL
+  int (*xWalCallback)(void *, sqlite3 *, const char *, int);
+  void *pWalArg;
+#endif
+  void(*xCollNeeded)(void*,sqlite3*,int eTextRep,const char*);
+  void(*xCollNeeded16)(void*,sqlite3*,int eTextRep,const void*);
+  void *pCollNeededArg;
+  sqlite3_value *pErr;          /* Most recent error message */
+  char *zErrMsg;                /* Most recent error message (UTF-8 encoded) */
+  char *zErrMsg16;              /* Most recent error message (UTF-16 encoded) */
+  union {
+    volatile int isInterrupted; /* True if sqlite3_interrupt has been called */
+    double notUsed1;            /* Spacer */
+  } u1;
+  Lookaside lookaside;          /* Lookaside malloc configuration */
+#ifndef SQLITE_OMIT_AUTHORIZATION
+  int (*xAuth)(void*,int,const char*,const char*,const char*,const char*);
+                                /* Access authorization function */
+  void *pAuthArg;               /* 1st argument to the access auth function */
+#endif
+#ifndef SQLITE_OMIT_PROGRESS_CALLBACK
+  int (*xProgress)(void *);     /* The progress callback */
+  void *pProgressArg;           /* Argument to the progress callback */
+  int nProgressOps;             /* Number of opcodes for progress callback */
+#endif
+#ifndef SQLITE_OMIT_VIRTUALTABLE
+  Hash aModule;                 /* populated by sqlite3_create_module() */
+  Table *pVTab;                 /* vtab with active Connect/Create method */
+  VTable **aVTrans;             /* Virtual tables with open transactions */
+  int nVTrans;                  /* Allocated size of aVTrans */
+  VTable *pDisconnect;    /* Disconnect these in next sqlite3_prepare() */
+#endif
+  FuncDefHash aFunc;            /* Hash table of connection functions */
+  Hash aCollSeq;                /* All collating sequences */
+  BusyHandler busyHandler;      /* Busy callback */
+  int busyTimeout;              /* Busy handler timeout, in msec */
+  Db aDbStatic[2];              /* Static space for the 2 default backends */
+  Savepoint *pSavepoint;        /* List of active savepoints */
+  int nSavepoint;               /* Number of non-transaction savepoints */
+  int nStatement;               /* Number of nested statement-transactions  */
+  u8 isTransactionSavepoint;    /* True if the outermost savepoint is a TS */
+  i64 nDeferredCons;            /* Net deferred constraints this transaction. */
+  int *pnBytesFreed;            /* If not NULL, increment this in DbFree() */
+
+#ifdef SQLITE_ENABLE_UNLOCK_NOTIFY
+  /* The following variables are all protected by the STATIC_MASTER 
+  ** mutex, not by sqlite3.mutex. They are used by code in notify.c. 
+  **
+  ** When X.pUnlockConnection==Y, that means that X is waiting for Y to
+  ** unlock so that it can proceed.
+  **
+  ** When X.pBlockingConnection==Y, that means that something that X tried
+  ** tried to do recently failed with an SQLITE_LOCKED error due to locks
+  ** held by Y.
+  */
+  sqlite3 *pBlockingConnection; /* Connection that caused SQLITE_LOCKED */
+  sqlite3 *pUnlockConnection;           /* Connection to watch for unlock */
+  void *pUnlockArg;                     /* Argument to xUnlockNotify */
+  void (*xUnlockNotify)(void **, int);  /* Unlock notify callback */
+  sqlite3 *pNextBlocked;        /* Next in list of all blocked connections */
+#endif
+};
+
+/*
+** A macro to discover the encoding of a database.
+*/
+#define ENC(db) ((db)->aDb[0].pSchema->enc)
+
+/*
+** Possible values for the sqlite3.flags.
+*/
+#define SQLITE_VdbeTrace      0x00000100  /* True to trace VDBE execution */
+#define SQLITE_InternChanges  0x00000200  /* Uncommitted Hash table changes */
+#define SQLITE_FullColNames   0x00000400  /* Show full column names on SELECT */
+#define SQLITE_ShortColNames  0x00000800  /* Show short columns names */
+#define SQLITE_CountRows      0x00001000  /* Count rows changed by INSERT, */
+                                          /*   DELETE, or UPDATE and return */
+                                          /*   the count using a callback. */
+#define SQLITE_NullCallback   0x00002000  /* Invoke the callback once if the */
+                                          /*   result set is empty */
+#define SQLITE_SqlTrace       0x00004000  /* Debug print SQL as it executes */
+#define SQLITE_VdbeListing    0x00008000  /* Debug listings of VDBE programs */
+#define SQLITE_WriteSchema    0x00010000  /* OK to update SQLITE_MASTER */
+#define SQLITE_NoReadlock     0x00020000  /* Readlocks are omitted when 
+                                          ** accessing read-only databases */
+#define SQLITE_IgnoreChecks   0x00040000  /* Do not enforce check constraints */
+#define SQLITE_ReadUncommitted 0x0080000  /* For shared-cache mode */
+#define SQLITE_LegacyFileFmt  0x00100000  /* Create new databases in format 1 */
+#define SQLITE_FullFSync      0x00200000  /* Use full fsync on the backend */
+#define SQLITE_CkptFullFSync  0x00400000  /* Use full fsync for checkpoint */
+#define SQLITE_RecoveryMode   0x00800000  /* Ignore schema errors */
+#define SQLITE_ReverseOrder   0x01000000  /* Reverse unordered SELECTs */
+#define SQLITE_RecTriggers    0x02000000  /* Enable recursive triggers */
+#define SQLITE_ForeignKeys    0x04000000  /* Enforce foreign key constraints  */
+#define SQLITE_AutoIndex      0x08000000  /* Enable automatic indexes */
+#define SQLITE_PreferBuiltin  0x10000000  /* Preference to built-in funcs */
+#define SQLITE_LoadExtension  0x20000000  /* Enable load_extension */
+#define SQLITE_EnableTrigger  0x40000000  /* True to enable triggers */
+
+/*
+** Bits of the sqlite3.flags field that are used by the
+** sqlite3_test_control(SQLITE_TESTCTRL_OPTIMIZATIONS,...) interface.
+** These must be the low-order bits of the flags field.
+*/
+#define SQLITE_QueryFlattener 0x01        /* Disable query flattening */
+#define SQLITE_ColumnCache    0x02        /* Disable the column cache */
+#define SQLITE_IndexSort      0x04        /* Disable indexes for sorting */
+#define SQLITE_IndexSearch    0x08        /* Disable indexes for searching */
+#define SQLITE_IndexCover     0x10        /* Disable index covering table */
+#define SQLITE_GroupByOrder   0x20        /* Disable GROUPBY cover of ORDERBY */
+#define SQLITE_FactorOutConst 0x40        /* Disable factoring out constants */
+#define SQLITE_OptMask        0xff        /* Mask of all disablable opts */
+
+/*
+** Possible values for the sqlite.magic field.
+** The numbers are obtained at random and have no special meaning, other
+** than being distinct from one another.
+*/
+#define SQLITE_MAGIC_OPEN     0xa029a697  /* Database is open */
+#define SQLITE_MAGIC_CLOSED   0x9f3c2d33  /* Database is closed */
+#define SQLITE_MAGIC_SICK     0x4b771290  /* Error and awaiting close */
+#define SQLITE_MAGIC_BUSY     0xf03b7906  /* Database currently in use */
+#define SQLITE_MAGIC_ERROR    0xb5357930  /* An SQLITE_MISUSE error occurred */
+
+/*
+** Each SQL function is defined by an instance of the following
+** structure.  A pointer to this structure is stored in the sqlite.aFunc
+** hash table.  When multiple functions have the same name, the hash table
+** points to a linked list of these structures.
+*/
+struct FuncDef {
+  i16 nArg;            /* Number of arguments.  -1 means unlimited */
+  u8 iPrefEnc;         /* Preferred text encoding (SQLITE_UTF8, 16LE, 16BE) */
+  u8 flags;            /* Some combination of SQLITE_FUNC_* */
+  void *pUserData;     /* User data parameter */
+  FuncDef *pNext;      /* Next function with same name */
+  void (*xFunc)(sqlite3_context*,int,sqlite3_value**); /* Regular function */
+  void (*xStep)(sqlite3_context*,int,sqlite3_value**); /* Aggregate step */
+  void (*xFinalize)(sqlite3_context*);                /* Aggregate finalizer */
+  char *zName;         /* SQL name of the function. */
+  FuncDef *pHash;      /* Next with a different name but the same hash */
+  FuncDestructor *pDestructor;   /* Reference counted destructor function */
+};
+
+/*
+** This structure encapsulates a user-function destructor callback (as
+** configured using create_function_v2()) and a reference counter. When
+** create_function_v2() is called to create a function with a destructor,
+** a single object of this type is allocated. FuncDestructor.nRef is set to 
+** the number of FuncDef objects created (either 1 or 3, depending on whether
+** or not the specified encoding is SQLITE_ANY). The FuncDef.pDestructor
+** member of each of the new FuncDef objects is set to point to the allocated
+** FuncDestructor.
+**
+** Thereafter, when one of the FuncDef objects is deleted, the reference
+** count on this object is decremented. When it reaches 0, the destructor
+** is invoked and the FuncDestructor structure freed.
+*/
+struct FuncDestructor {
+  int nRef;
+  void (*xDestroy)(void *);
+  void *pUserData;
+};
+
+/*
+** Possible values for FuncDef.flags
+*/
+#define SQLITE_FUNC_LIKE     0x01 /* Candidate for the LIKE optimization */
+#define SQLITE_FUNC_CASE     0x02 /* Case-sensitive LIKE-type function */
+#define SQLITE_FUNC_EPHEM    0x04 /* Ephemeral.  Delete with VDBE */
+#define SQLITE_FUNC_NEEDCOLL 0x08 /* sqlite3GetFuncCollSeq() might be called */
+#define SQLITE_FUNC_PRIVATE  0x10 /* Allowed for internal use only */
+#define SQLITE_FUNC_COUNT    0x20 /* Built-in count(*) aggregate */
+#define SQLITE_FUNC_COALESCE 0x40 /* Built-in coalesce() or ifnull() function */
+
+/*
+** The following three macros, FUNCTION(), LIKEFUNC() and AGGREGATE() are
+** used to create the initializers for the FuncDef structures.
+**
+**   FUNCTION(zName, nArg, iArg, bNC, xFunc)
+**     Used to create a scalar function definition of a function zName 
+**     implemented by C function xFunc that accepts nArg arguments. The
+**     value passed as iArg is cast to a (void*) and made available
+**     as the user-data (sqlite3_user_data()) for the function. If 
+**     argument bNC is true, then the SQLITE_FUNC_NEEDCOLL flag is set.
+**
+**   AGGREGATE(zName, nArg, iArg, bNC, xStep, xFinal)
+**     Used to create an aggregate function definition implemented by
+**     the C functions xStep and xFinal. The first four parameters
+**     are interpreted in the same way as the first 4 parameters to
+**     FUNCTION().
+**
+**   LIKEFUNC(zName, nArg, pArg, flags)
+**     Used to create a scalar function definition of a function zName 
+**     that accepts nArg arguments and is implemented by a call to C 
+**     function likeFunc. Argument pArg is cast to a (void *) and made
+**     available as the function user-data (sqlite3_user_data()). The
+**     FuncDef.flags variable is set to the value passed as the flags
+**     parameter.
+*/
+#define FUNCTION(zName, nArg, iArg, bNC, xFunc) \
+  {nArg, SQLITE_UTF8, bNC*SQLITE_FUNC_NEEDCOLL, \
+   SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, 0, #zName, 0, 0}
+#define STR_FUNCTION(zName, nArg, pArg, bNC, xFunc) \
+  {nArg, SQLITE_UTF8, bNC*SQLITE_FUNC_NEEDCOLL, \
+   pArg, 0, xFunc, 0, 0, #zName, 0, 0}
+#define LIKEFUNC(zName, nArg, arg, flags) \
+  {nArg, SQLITE_UTF8, flags, (void *)arg, 0, likeFunc, 0, 0, #zName, 0, 0}
+#define AGGREGATE(zName, nArg, arg, nc, xStep, xFinal) \
+  {nArg, SQLITE_UTF8, nc*SQLITE_FUNC_NEEDCOLL, \
+   SQLITE_INT_TO_PTR(arg), 0, 0, xStep,xFinal,#zName,0,0}
+
+/*
+** All current savepoints are stored in a linked list starting at
+** sqlite3.pSavepoint. The first element in the list is the most recently
+** opened savepoint. Savepoints are added to the list by the vdbe
+** OP_Savepoint instruction.
+*/
+struct Savepoint {
+  char *zName;                        /* Savepoint name (nul-terminated) */
+  i64 nDeferredCons;                  /* Number of deferred fk violations */
+  Savepoint *pNext;                   /* Parent savepoint (if any) */
+};
+
+/*
+** The following are used as the second parameter to sqlite3Savepoint(),
+** and as the P1 argument to the OP_Savepoint instruction.
+*/
+#define SAVEPOINT_BEGIN      0
+#define SAVEPOINT_RELEASE    1
+#define SAVEPOINT_ROLLBACK   2
+
+
+/*
+** Each SQLite module (virtual table definition) is defined by an
+** instance of the following structure, stored in the sqlite3.aModule
+** hash table.
+*/
+struct Module {
+  const sqlite3_module *pModule;       /* Callback pointers */
+  const char *zName;                   /* Name passed to create_module() */
+  void *pAux;                          /* pAux passed to create_module() */
+  void (*xDestroy)(void *);            /* Module destructor function */
+};
+
+/*
+** information about each column of an SQL table is held in an instance
+** of this structure.
+*/
+struct Column {
+  char *zName;     /* Name of this column */
+  Expr *pDflt;     /* Default value of this column */
+  char *zDflt;     /* Original text of the default value */
+  char *zType;     /* Data type for this column */
+  char *zColl;     /* Collating sequence.  If NULL, use the default */
+  u8 notNull;      /* True if there is a NOT NULL constraint */
+  u8 isPrimKey;    /* True if this column is part of the PRIMARY KEY */
+  char affinity;   /* One of the SQLITE_AFF_... values */
+#ifndef SQLITE_OMIT_VIRTUALTABLE
+  u8 isHidden;     /* True if this column is 'hidden' */
+#endif
+};
+
+/*
+** A "Collating Sequence" is defined by an instance of the following
+** structure. Conceptually, a collating sequence consists of a name and
+** a comparison routine that defines the order of that sequence.
+**
+** There may two separate implementations of the collation function, one
+** that processes text in UTF-8 encoding (CollSeq.xCmp) and another that
+** processes text encoded in UTF-16 (CollSeq.xCmp16), using the machine
+** native byte order. When a collation sequence is invoked, SQLite selects
+** the version that will require the least expensive encoding
+** translations, if any.
+**
+** The CollSeq.pUser member variable is an extra parameter that passed in
+** as the first argument to the UTF-8 comparison function, xCmp.
+** CollSeq.pUser16 is the equivalent for the UTF-16 comparison function,
+** xCmp16.
+**
+** If both CollSeq.xCmp and CollSeq.xCmp16 are NULL, it means that the
+** collating sequence is undefined.  Indices built on an undefined
+** collating sequence may not be read or written.
+*/
+struct CollSeq {
+  char *zName;          /* Name of the collating sequence, UTF-8 encoded */
+  u8 enc;               /* Text encoding handled by xCmp() */
+  u8 type;              /* One of the SQLITE_COLL_... values below */
+  void *pUser;          /* First argument to xCmp() */
+  int (*xCmp)(void*,int, const void*, int, const void*);
+  void (*xDel)(void*);  /* Destructor for pUser */
+};
+
+/*
+** Allowed values of CollSeq.type:
+*/
+#define SQLITE_COLL_BINARY  1  /* The default memcmp() collating sequence */
+#define SQLITE_COLL_NOCASE  2  /* The built-in NOCASE collating sequence */
+#define SQLITE_COLL_REVERSE 3  /* The built-in REVERSE collating sequence */
+#define SQLITE_COLL_USER    0  /* Any other user-defined collating sequence */
+
+/*
+** A sort order can be either ASC or DESC.
+*/
+#define SQLITE_SO_ASC       0  /* Sort in ascending order */
+#define SQLITE_SO_DESC      1  /* Sort in ascending order */
+
+/*
+** Column affinity types.
+**
+** These used to have mnemonic name like 'i' for SQLITE_AFF_INTEGER and
+** 't' for SQLITE_AFF_TEXT.  But we can save a little space and improve
+** the speed a little by numbering the values consecutively.  
+**
+** But rather than start with 0 or 1, we begin with 'a'.  That way,
+** when multiple affinity types are concatenated into a string and
+** used as the P4 operand, they will be more readable.
+**
+** Note also that the numeric types are grouped together so that testing
+** for a numeric type is a single comparison.
+*/
+#define SQLITE_AFF_TEXT     'a'
+#define SQLITE_AFF_NONE     'b'
+#define SQLITE_AFF_NUMERIC  'c'
+#define SQLITE_AFF_INTEGER  'd'
+#define SQLITE_AFF_REAL     'e'
+
+#define sqlite3IsNumericAffinity(X)  ((X)>=SQLITE_AFF_NUMERIC)
+
+/*
+** The SQLITE_AFF_MASK values masks off the significant bits of an
+** affinity value. 
+*/
+#define SQLITE_AFF_MASK     0x67
+
+/*
+** Additional bit values that can be ORed with an affinity without
+** changing the affinity.
+*/
+#define SQLITE_JUMPIFNULL   0x08  /* jumps if either operand is NULL */
+#define SQLITE_STOREP2      0x10  /* Store result in reg[P2] rather than jump */
+#define SQLITE_NULLEQ       0x80  /* NULL=NULL */
+
+/*
+** An object of this type is created for each virtual table present in
+** the database schema. 
+**
+** If the database schema is shared, then there is one instance of this
+** structure for each database connection (sqlite3*) that uses the shared
+** schema. This is because each database connection requires its own unique
+** instance of the sqlite3_vtab* handle used to access the virtual table 
+** implementation. sqlite3_vtab* handles can not be shared between 
+** database connections, even when the rest of the in-memory database 
+** schema is shared, as the implementation often stores the database
+** connection handle passed to it via the xConnect() or xCreate() method
+** during initialization internally. This database connection handle may
+** then be used by the virtual table implementation to access real tables 
+** within the database. So that they appear as part of the callers 
+** transaction, these accesses need to be made via the same database 
+** connection as that used to execute SQL operations on the virtual table.
+**
+** All VTable objects that correspond to a single table in a shared
+** database schema are initially stored in a linked-list pointed to by
+** the Table.pVTable member variable of the corresponding Table object.
+** When an sqlite3_prepare() operation is required to access the virtual
+** table, it searches the list for the VTable that corresponds to the
+** database connection doing the preparing so as to use the correct
+** sqlite3_vtab* handle in the compiled query.
+**
+** When an in-memory Table object is deleted (for example when the
+** schema is being reloaded for some reason), the VTable objects are not 
+** deleted and the sqlite3_vtab* handles are not xDisconnect()ed 
+** immediately. Instead, they are moved from the Table.pVTable list to
+** another linked list headed by the sqlite3.pDisconnect member of the
+** corresponding sqlite3 structure. They are then deleted/xDisconnected 
+** next time a statement is prepared using said sqlite3*. This is done
+** to avoid deadlock issues involving multiple sqlite3.mutex mutexes.
+** Refer to comments above function sqlite3VtabUnlockList() for an
+** explanation as to why it is safe to add an entry to an sqlite3.pDisconnect
+** list without holding the corresponding sqlite3.mutex mutex.
+**
+** The memory for objects of this type is always allocated by 
+** sqlite3DbMalloc(), using the connection handle stored in VTable.db as 
+** the first argument.
+*/
+struct VTable {
+  sqlite3 *db;              /* Database connection associated with this table */
+  Module *pMod;             /* Pointer to module implementation */
+  sqlite3_vtab *pVtab;      /* Pointer to vtab instance */
+  int nRef;                 /* Number of pointers to this structure */
+  VTable *pNext;            /* Next in linked list (see above) */
+};
+
+/*
+** Each SQL table is represented in memory by an instance of the
+** following structure.
+**
+** Table.zName is the name of the table.  The case of the original
+** CREATE TABLE statement is stored, but case is not significant for
+** comparisons.
+**
+** Table.nCol is the number of columns in this table.  Table.aCol is a
+** pointer to an array of Column structures, one for each column.
+**
+** If the table has an INTEGER PRIMARY KEY, then Table.iPKey is the index of
+** the column that is that key.   Otherwise Table.iPKey is negative.  Note
+** that the datatype of the PRIMARY KEY must be INTEGER for this field to
+** be set.  An INTEGER PRIMARY KEY is used as the rowid for each row of
+** the table.  If a table has no INTEGER PRIMARY KEY, then a random rowid
+** is generated for each row of the table.  TF_HasPrimaryKey is set if
+** the table has any PRIMARY KEY, INTEGER or otherwise.
+**
+** Table.tnum is the page number for the root BTree page of the table in the
+** database file.  If Table.iDb is the index of the database table backend
+** in sqlite.aDb[].  0 is for the main database and 1 is for the file that
+** holds temporary tables and indices.  If TF_Ephemeral is set
+** then the table is stored in a file that is automatically deleted
+** when the VDBE cursor to the table is closed.  In this case Table.tnum 
+** refers VDBE cursor number that holds the table open, not to the root
+** page number.  Transient tables are used to hold the results of a
+** sub-query that appears instead of a real table name in the FROM clause 
+** of a SELECT statement.
+*/
+struct Table {
+  char *zName;         /* Name of the table or view */
+  int iPKey;           /* If not negative, use aCol[iPKey] as the primary key */
+  int nCol;            /* Number of columns in this table */
+  Column *aCol;        /* Information about each column */
+  Index *pIndex;       /* List of SQL indexes on this table. */
+  int tnum;            /* Root BTree node for this table (see note above) */
+  unsigned nRowEst;    /* Estimated rows in table - from sqlite_stat1 table */
+  Select *pSelect;     /* NULL for tables.  Points to definition if a view. */
+  u16 nRef;            /* Number of pointers to this Table */
+  u8 tabFlags;         /* Mask of TF_* values */
+  u8 keyConf;          /* What to do in case of uniqueness conflict on iPKey */
+  FKey *pFKey;         /* Linked list of all foreign keys in this table */
+  char *zColAff;       /* String defining the affinity of each column */
+#ifndef SQLITE_OMIT_CHECK
+  Expr *pCheck;        /* The AND of all CHECK constraints */
+#endif
+#ifndef SQLITE_OMIT_ALTERTABLE
+  int addColOffset;    /* Offset in CREATE TABLE stmt to add a new column */
+#endif
+#ifndef SQLITE_OMIT_VIRTUALTABLE
+  VTable *pVTable;     /* List of VTable objects. */
+  int nModuleArg;      /* Number of arguments to the module */
+  char **azModuleArg;  /* Text of all module args. [0] is module name */
+#endif
+  Trigger *pTrigger;   /* List of triggers stored in pSchema */
+  Schema *pSchema;     /* Schema that contains this table */
+  Table *pNextZombie;  /* Next on the Parse.pZombieTab list */
+};
+
+/*
+** Allowed values for Tabe.tabFlags.
+*/
+#define TF_Readonly        0x01    /* Read-only system table */
+#define TF_Ephemeral       0x02    /* An ephemeral table */
+#define TF_HasPrimaryKey   0x04    /* Table has a primary key */
+#define TF_Autoincrement   0x08    /* Integer primary key is autoincrement */
+#define TF_Virtual         0x10    /* Is a virtual table */
+#define TF_NeedMetadata    0x20    /* aCol[].zType and aCol[].pColl missing */
+
+
+
+/*
+** Test to see whether or not a table is a virtual table.  This is
+** done as a macro so that it will be optimized out when virtual
+** table support is omitted from the build.
+*/
+#ifndef SQLITE_OMIT_VIRTUALTABLE
+#  define IsVirtual(X)      (((X)->tabFlags & TF_Virtual)!=0)
+#  define IsHiddenColumn(X) ((X)->isHidden)
+#else
+#  define IsVirtual(X)      0
+#  define IsHiddenColumn(X) 0
+#endif
+
+/*
+** Each foreign key constraint is an instance of the following structure.
+**
+** A foreign key is associated with two tables.  The "from" table is
+** the table that contains the REFERENCES clause that creates the foreign
+** key.  The "to" table is the table that is named in the REFERENCES clause.
+** Consider this example:
+**
+**     CREATE TABLE ex1(
+**       a INTEGER PRIMARY KEY,
+**       b INTEGER CONSTRAINT fk1 REFERENCES ex2(x)
+**     );
+**
+** For foreign key "fk1", the from-table is "ex1" and the to-table is "ex2".
+**
+** Each REFERENCES clause generates an instance of the following structure
+** which is attached to the from-table.  The to-table need not exist when
+** the from-table is created.  The existence of the to-table is not checked.
+*/
+struct FKey {
+  Table *pFrom;     /* Table containing the REFERENCES clause (aka: Child) */
+  FKey *pNextFrom;  /* Next foreign key in pFrom */
+  char *zTo;        /* Name of table that the key points to (aka: Parent) */
+  FKey *pNextTo;    /* Next foreign key on table named zTo */
+  FKey *pPrevTo;    /* Previous foreign key on table named zTo */
+  int nCol;         /* Number of columns in this key */
+  /* EV: R-30323-21917 */
+  u8 isDeferred;    /* True if constraint checking is deferred till COMMIT */
+  u8 aAction[2];          /* ON DELETE and ON UPDATE actions, respectively */
+  Trigger *apTrigger[2];  /* Triggers for aAction[] actions */
+  struct sColMap {  /* Mapping of columns in pFrom to columns in zTo */
+    int iFrom;         /* Index of column in pFrom */
+    char *zCol;        /* Name of column in zTo.  If 0 use PRIMARY KEY */
+  } aCol[1];        /* One entry for each of nCol column s */
+};
+
+/*
+** SQLite supports many different ways to resolve a constraint
+** error.  ROLLBACK processing means that a constraint violation
+** causes the operation in process to fail and for the current transaction
+** to be rolled back.  ABORT processing means the operation in process
+** fails and any prior changes from that one operation are backed out,
+** but the transaction is not rolled back.  FAIL processing means that
+** the operation in progress stops and returns an error code.  But prior
+** changes due to the same operation are not backed out and no rollback
+** occurs.  IGNORE means that the particular row that caused the constraint
+** error is not inserted or updated.  Processing continues and no error
+** is returned.  REPLACE means that preexisting database rows that caused
+** a UNIQUE constraint violation are removed so that the new insert or
+** update can proceed.  Processing continues and no error is reported.
+**
+** RESTRICT, SETNULL, and CASCADE actions apply only to foreign keys.
+** RESTRICT is the same as ABORT for IMMEDIATE foreign keys and the
+** same as ROLLBACK for DEFERRED keys.  SETNULL means that the foreign
+** key is set to NULL.  CASCADE means that a DELETE or UPDATE of the
+** referenced table row is propagated into the row that holds the
+** foreign key.
+** 
+** The following symbolic values are used to record which type
+** of action to take.
+*/
+#define OE_None     0   /* There is no constraint to check */
+#define OE_Rollback 1   /* Fail the operation and rollback the transaction */
+#define OE_Abort    2   /* Back out changes but do no rollback transaction */
+#define OE_Fail     3   /* Stop the operation but leave all prior changes */
+#define OE_Ignore   4   /* Ignore the error. Do not do the INSERT or UPDATE */
+#define OE_Replace  5   /* Delete existing record, then do INSERT or UPDATE */
+
+#define OE_Restrict 6   /* OE_Abort for IMMEDIATE, OE_Rollback for DEFERRED */
+#define OE_SetNull  7   /* Set the foreign key value to NULL */
+#define OE_SetDflt  8   /* Set the foreign key value to its default */
+#define OE_Cascade  9   /* Cascade the changes */
+
+#define OE_Default  99  /* Do whatever the default action is */
+
+
+/*
+** An instance of the following structure is passed as the first
+** argument to sqlite3VdbeKeyCompare and is used to control the 
+** comparison of the two index keys.
+*/
+struct KeyInfo {
+  sqlite3 *db;        /* The database connection */
+  u8 enc;             /* Text encoding - one of the SQLITE_UTF* values */
+  u16 nField;         /* Number of entries in aColl[] */
+  u8 *aSortOrder;     /* Sort order for each column.  May be NULL */
+  CollSeq *aColl[1];  /* Collating sequence for each term of the key */
+};
+
+/*
+** An instance of the following structure holds information about a
+** single index record that has already been parsed out into individual
+** values.
+**
+** A record is an object that contains one or more fields of data.
+** Records are used to store the content of a table row and to store
+** the key of an index.  A blob encoding of a record is created by
+** the OP_MakeRecord opcode of the VDBE and is disassembled by the
+** OP_Column opcode.
+**
+** This structure holds a record that has already been disassembled
+** into its constituent fields.
+*/
+struct UnpackedRecord {
+  KeyInfo *pKeyInfo;  /* Collation and sort-order information */
+  u16 nField;         /* Number of entries in apMem[] */
+  u16 flags;          /* Boolean settings.  UNPACKED_... below */
+  i64 rowid;          /* Used by UNPACKED_PREFIX_SEARCH */
+  Mem *aMem;          /* Values */
+};
+
+/*
+** Allowed values of UnpackedRecord.flags
+*/
+#define UNPACKED_NEED_FREE     0x0001  /* Memory is from sqlite3Malloc() */
+#define UNPACKED_NEED_DESTROY  0x0002  /* apMem[]s should all be destroyed */
+#define UNPACKED_IGNORE_ROWID  0x0004  /* Ignore trailing rowid on key1 */
+#define UNPACKED_INCRKEY       0x0008  /* Make this key an epsilon larger */
+#define UNPACKED_PREFIX_MATCH  0x0010  /* A prefix match is considered OK */
+#define UNPACKED_PREFIX_SEARCH 0x0020  /* A prefix match is considered OK */
+
+/*
+** Each SQL index is represented in memory by an
+** instance of the following structure.
+**
+** The columns of the table that are to be indexed are described
+** by the aiColumn[] field of this structure.  For example, suppose
+** we have the following table and index:
+**
+**     CREATE TABLE Ex1(c1 int, c2 int, c3 text);
+**     CREATE INDEX Ex2 ON Ex1(c3,c1);
+**
+** In the Table structure describing Ex1, nCol==3 because there are
+** three columns in the table.  In the Index structure describing
+** Ex2, nColumn==2 since 2 of the 3 columns of Ex1 are indexed.
+** The value of aiColumn is {2, 0}.  aiColumn[0]==2 because the 
+** first column to be indexed (c3) has an index of 2 in Ex1.aCol[].
+** The second column to be indexed (c1) has an index of 0 in
+** Ex1.aCol[], hence Ex2.aiColumn[1]==0.
+**
+** The Index.onError field determines whether or not the indexed columns
+** must be unique and what to do if they are not.  When Index.onError=OE_None,
+** it means this is not a unique index.  Otherwise it is a unique index
+** and the value of Index.onError indicate the which conflict resolution 
+** algorithm to employ whenever an attempt is made to insert a non-unique
+** element.
+*/
+struct Index {
+  char *zName;     /* Name of this index */
+  int nColumn;     /* Number of columns in the table used by this index */
+  int *aiColumn;   /* Which columns are used by this index.  1st is 0 */
+  unsigned *aiRowEst; /* Result of ANALYZE: Est. rows selected by each column */
+  Table *pTable;   /* The SQL table being indexed */
+  int tnum;        /* Page containing root of this index in database file */
+  u8 onError;      /* OE_Abort, OE_Ignore, OE_Replace, or OE_None */
+  u8 autoIndex;    /* True if is automatically created (ex: by UNIQUE) */
+  u8 bUnordered;   /* Use this index for == or IN queries only */
+  char *zColAff;   /* String defining the affinity of each column */
+  Index *pNext;    /* The next index associated with the same table */
+  Schema *pSchema; /* Schema containing this index */
+  u8 *aSortOrder;  /* Array of size Index.nColumn. True==DESC, False==ASC */
+  char **azColl;   /* Array of collation sequence names for index */
+  IndexSample *aSample;    /* Array of SQLITE_INDEX_SAMPLES samples */
+};
+
+/*
+** Each sample stored in the sqlite_stat2 table is represented in memory 
+** using a structure of this type.
+*/
+struct IndexSample {
+  union {
+    char *z;        /* Value if eType is SQLITE_TEXT or SQLITE_BLOB */
+    double r;       /* Value if eType is SQLITE_FLOAT or SQLITE_INTEGER */
+  } u;
+  u8 eType;         /* SQLITE_NULL, SQLITE_INTEGER ... etc. */
+  u8 nByte;         /* Size in byte of text or blob. */
+};
+
+/*
+** Each token coming out of the lexer is an instance of
+** this structure.  Tokens are also used as part of an expression.
+**
+** Note if Token.z==0 then Token.dyn and Token.n are undefined and
+** may contain random values.  Do not make any assumptions about Token.dyn
+** and Token.n when Token.z==0.
+*/
+struct Token {
+  const char *z;     /* Text of the token.  Not NULL-terminated! */
+  unsigned int n;    /* Number of characters in this token */
+};
+
+/*
+** An instance of this structure contains information needed to generate
+** code for a SELECT that contains aggregate functions.
+**
+** If Expr.op==TK_AGG_COLUMN or TK_AGG_FUNCTION then Expr.pAggInfo is a
+** pointer to this structure.  The Expr.iColumn field is the index in
+** AggInfo.aCol[] or AggInfo.aFunc[] of information needed to generate
+** code for that node.
+**
+** AggInfo.pGroupBy and AggInfo.aFunc.pExpr point to fields within the
+** original Select structure that describes the SELECT statement.  These
+** fields do not need to be freed when deallocating the AggInfo structure.
+*/
+struct AggInfo {
+  u8 directMode;          /* Direct rendering mode means take data directly
+                          ** from source tables rather than from accumulators */
+  u8 useSortingIdx;       /* In direct mode, reference the sorting index rather
+                          ** than the source table */
+  int sortingIdx;         /* Cursor number of the sorting index */
+  ExprList *pGroupBy;     /* The group by clause */
+  int nSortingColumn;     /* Number of columns in the sorting index */
+  struct AggInfo_col {    /* For each column used in source tables */
+    Table *pTab;             /* Source table */
+    int iTable;              /* Cursor number of the source table */
+    int iColumn;             /* Column number within the source table */
+    int iSorterColumn;       /* Column number in the sorting index */
+    int iMem;                /* Memory location that acts as accumulator */
+    Expr *pExpr;             /* The original expression */
+  } *aCol;
+  int nColumn;            /* Number of used entries in aCol[] */
+  int nColumnAlloc;       /* Number of slots allocated for aCol[] */
+  int nAccumulator;       /* Number of columns that show through to the output.
+                          ** Additional columns are used only as parameters to
+                          ** aggregate functions */
+  struct AggInfo_func {   /* For each aggregate function */
+    Expr *pExpr;             /* Expression encoding the function */
+    FuncDef *pFunc;          /* The aggregate function implementation */
+    int iMem;                /* Memory location that acts as accumulator */
+    int iDistinct;           /* Ephemeral table used to enforce DISTINCT */
+  } *aFunc;
+  int nFunc;              /* Number of entries in aFunc[] */
+  int nFuncAlloc;         /* Number of slots allocated for aFunc[] */
+};
+
+/*
+** The datatype ynVar is a signed integer, either 16-bit or 32-bit.
+** Usually it is 16-bits.  But if SQLITE_MAX_VARIABLE_NUMBER is greater
+** than 32767 we have to make it 32-bit.  16-bit is preferred because
+** it uses less memory in the Expr object, which is a big memory user
+** in systems with lots of prepared statements.  And few applications
+** need more than about 10 or 20 variables.  But some extreme users want
+** to have prepared statements with over 32767 variables, and for them
+** the option is available (at compile-time).
+*/
+#if SQLITE_MAX_VARIABLE_NUMBER<=32767
+typedef i16 ynVar;
+#else
+typedef int ynVar;
+#endif
+
+/*
+** Each node of an expression in the parse tree is an instance
+** of this structure.
+**
+** Expr.op is the opcode. The integer parser token codes are reused
+** as opcodes here. For example, the parser defines TK_GE to be an integer
+** code representing the ">=" operator. This same integer code is reused
+** to represent the greater-than-or-equal-to operator in the expression
+** tree.
+**
+** If the expression is an SQL literal (TK_INTEGER, TK_FLOAT, TK_BLOB, 
+** or TK_STRING), then Expr.token contains the text of the SQL literal. If
+** the expression is a variable (TK_VARIABLE), then Expr.token contains the 
+** variable name. Finally, if the expression is an SQL function (TK_FUNCTION),
+** then Expr.token contains the name of the function.
+**
+** Expr.pRight and Expr.pLeft are the left and right subexpressions of a
+** binary operator. Either or both may be NULL.
+**
+** Expr.x.pList is a list of arguments if the expression is an SQL function,
+** a CASE expression or an IN expression of the form "<lhs> IN (<y>, <z>...)".
+** Expr.x.pSelect is used if the expression is a sub-select or an expression of
+** the form "<lhs> IN (SELECT ...)". If the EP_xIsSelect bit is set in the
+** Expr.flags mask, then Expr.x.pSelect is valid. Otherwise, Expr.x.pList is 
+** valid.
+**
+** An expression of the form ID or ID.ID refers to a column in a table.
+** For such expressions, Expr.op is set to TK_COLUMN and Expr.iTable is
+** the integer cursor number of a VDBE cursor pointing to that table and
+** Expr.iColumn is the column number for the specific column.  If the
+** expression is used as a result in an aggregate SELECT, then the
+** value is also stored in the Expr.iAgg column in the aggregate so that
+** it can be accessed after all aggregates are computed.
+**
+** If the expression is an unbound variable marker (a question mark 
+** character '?' in the original SQL) then the Expr.iTable holds the index 
+** number for that variable.
+**
+** If the expression is a subquery then Expr.iColumn holds an integer
+** register number containing the result of the subquery.  If the
+** subquery gives a constant result, then iTable is -1.  If the subquery
+** gives a different answer at different times during statement processing
+** then iTable is the address of a subroutine that computes the subquery.
+**
+** If the Expr is of type OP_Column, and the table it is selecting from
+** is a disk table or the "old.*" pseudo-table, then pTab points to the
+** corresponding table definition.
+**
+** ALLOCATION NOTES:
+**
+** Expr objects can use a lot of memory space in database schema.  To
+** help reduce memory requirements, sometimes an Expr object will be
+** truncated.  And to reduce the number of memory allocations, sometimes
+** two or more Expr objects will be stored in a single memory allocation,
+** together with Expr.zToken strings.
+**
+** If the EP_Reduced and EP_TokenOnly flags are set when
+** an Expr object is truncated.  When EP_Reduced is set, then all
+** the child Expr objects in the Expr.pLeft and Expr.pRight subtrees
+** are contained within the same memory allocation.  Note, however, that
+** the subtrees in Expr.x.pList or Expr.x.pSelect are always separately
+** allocated, regardless of whether or not EP_Reduced is set.
+*/
+struct Expr {
+  u8 op;                 /* Operation performed by this node */
+  char affinity;         /* The affinity of the column or 0 if not a column */
+  u16 flags;             /* Various flags.  EP_* See below */
+  union {
+    char *zToken;          /* Token value. Zero terminated and dequoted */
+    int iValue;            /* Non-negative integer value if EP_IntValue */
+  } u;
+
+  /* If the EP_TokenOnly flag is set in the Expr.flags mask, then no
+  ** space is allocated for the fields below this point. An attempt to
+  ** access them will result in a segfault or malfunction. 
+  *********************************************************************/
+
+  Expr *pLeft;           /* Left subnode */
+  Expr *pRight;          /* Right subnode */
+  union {
+    ExprList *pList;     /* Function arguments or in "<expr> IN (<expr-list)" */
+    Select *pSelect;     /* Used for sub-selects and "<expr> IN (<select>)" */
+  } x;
+  CollSeq *pColl;        /* The collation type of the column or 0 */
+
+  /* If the EP_Reduced flag is set in the Expr.flags mask, then no
+  ** space is allocated for the fields below this point. An attempt to
+  ** access them will result in a segfault or malfunction.
+  *********************************************************************/
+
+  int iTable;            /* TK_COLUMN: cursor number of table holding column
+                         ** TK_REGISTER: register number
+                         ** TK_TRIGGER: 1 -> new, 0 -> old */
+  ynVar iColumn;         /* TK_COLUMN: column index.  -1 for rowid.
+                         ** TK_VARIABLE: variable number (always >= 1). */
+  i16 iAgg;              /* Which entry in pAggInfo->aCol[] or ->aFunc[] */
+  i16 iRightJoinTable;   /* If EP_FromJoin, the right table of the join */
+  u8 flags2;             /* Second set of flags.  EP2_... */
+  u8 op2;                /* If a TK_REGISTER, the original value of Expr.op */
+  AggInfo *pAggInfo;     /* Used by TK_AGG_COLUMN and TK_AGG_FUNCTION */
+  Table *pTab;           /* Table for TK_COLUMN expressions. */
+#if SQLITE_MAX_EXPR_DEPTH>0
+  int nHeight;           /* Height of the tree headed by this node */
+#endif
+};
+
+/*
+** The following are the meanings of bits in the Expr.flags field.
+*/
+#define EP_FromJoin   0x0001  /* Originated in ON or USING clause of a join */
+#define EP_Agg        0x0002  /* Contains one or more aggregate functions */
+#define EP_Resolved   0x0004  /* IDs have been resolved to COLUMNs */
+#define EP_Error      0x0008  /* Expression contains one or more errors */
+#define EP_Distinct   0x0010  /* Aggregate function with DISTINCT keyword */
+#define EP_VarSelect  0x0020  /* pSelect is correlated, not constant */
+#define EP_DblQuoted  0x0040  /* token.z was originally in "..." */
+#define EP_InfixFunc  0x0080  /* True for an infix function: LIKE, GLOB, etc */
+#define EP_ExpCollate 0x0100  /* Collating sequence specified explicitly */
+#define EP_FixedDest  0x0200  /* Result needed in a specific register */
+#define EP_IntValue   0x0400  /* Integer value contained in u.iValue */
+#define EP_xIsSelect  0x0800  /* x.pSelect is valid (otherwise x.pList is) */
+
+#define EP_Reduced    0x1000  /* Expr struct is EXPR_REDUCEDSIZE bytes only */
+#define EP_TokenOnly  0x2000  /* Expr struct is EXPR_TOKENONLYSIZE bytes only */
+#define EP_Static     0x4000  /* Held in memory not obtained from malloc() */
+
+/*
+** The following are the meanings of bits in the Expr.flags2 field.
+*/
+#define EP2_MallocedToken  0x0001  /* Need to sqlite3DbFree() Expr.zToken */
+#define EP2_Irreducible    0x0002  /* Cannot EXPRDUP_REDUCE this Expr */
+
+/*
+** The pseudo-routine sqlite3ExprSetIrreducible sets the EP2_Irreducible
+** flag on an expression structure.  This flag is used for VV&A only.  The
+** routine is implemented as a macro that only works when in debugging mode,
+** so as not to burden production code.
+*/
+#ifdef SQLITE_DEBUG
+# define ExprSetIrreducible(X)  (X)->flags2 |= EP2_Irreducible
+#else
+# define ExprSetIrreducible(X)
+#endif
+
+/*
+** These macros can be used to test, set, or clear bits in the 
+** Expr.flags field.
+*/
+#define ExprHasProperty(E,P)     (((E)->flags&(P))==(P))
+#define ExprHasAnyProperty(E,P)  (((E)->flags&(P))!=0)
+#define ExprSetProperty(E,P)     (E)->flags|=(P)
+#define ExprClearProperty(E,P)   (E)->flags&=~(P)
+
+/*
+** Macros to determine the number of bytes required by a normal Expr 
+** struct, an Expr struct with the EP_Reduced flag set in Expr.flags 
+** and an Expr struct with the EP_TokenOnly flag set.
+*/
+#define EXPR_FULLSIZE           sizeof(Expr)           /* Full size */
+#define EXPR_REDUCEDSIZE        offsetof(Expr,iTable)  /* Common features */
+#define EXPR_TOKENONLYSIZE      offsetof(Expr,pLeft)   /* Fewer features */
+
+/*
+** Flags passed to the sqlite3ExprDup() function. See the header comment 
+** above sqlite3ExprDup() for details.
+*/
+#define EXPRDUP_REDUCE         0x0001  /* Used reduced-size Expr nodes */
+
+/*
+** A list of expressions.  Each expression may optionally have a
+** name.  An expr/name combination can be used in several ways, such
+** as the list of "expr AS ID" fields following a "SELECT" or in the
+** list of "ID = expr" items in an UPDATE.  A list of expressions can
+** also be used as the argument to a function, in which case the a.zName
+** field is not used.
+*/
+struct ExprList {
+  int nExpr;             /* Number of expressions on the list */
+  int nAlloc;            /* Number of entries allocated below */
+  int iECursor;          /* VDBE Cursor associated with this ExprList */
+  struct ExprList_item {
+    Expr *pExpr;           /* The list of expressions */
+    char *zName;           /* Token associated with this expression */
+    char *zSpan;           /* Original text of the expression */
+    u8 sortOrder;          /* 1 for DESC or 0 for ASC */
+    u8 done;               /* A flag to indicate when processing is finished */
+    u16 iCol;              /* For ORDER BY, column number in result set */
+    u16 iAlias;            /* Index into Parse.aAlias[] for zName */
+  } *a;                  /* One entry for each expression */
+};
+
+/*
+** An instance of this structure is used by the parser to record both
+** the parse tree for an expression and the span of input text for an
+** expression.
+*/
+struct ExprSpan {
+  Expr *pExpr;          /* The expression parse tree */
+  const char *zStart;   /* First character of input text */
+  const char *zEnd;     /* One character past the end of input text */
+};
+
+/*
+** An instance of this structure can hold a simple list of identifiers,
+** such as the list "a,b,c" in the following statements:
+**
+**      INSERT INTO t(a,b,c) VALUES ...;
+**      CREATE INDEX idx ON t(a,b,c);
+**      CREATE TRIGGER trig BEFORE UPDATE ON t(a,b,c) ...;
+**
+** The IdList.a.idx field is used when the IdList represents the list of
+** column names after a table name in an INSERT statement.  In the statement
+**
+**     INSERT INTO t(a,b,c) ...
+**
+** If "a" is the k-th column of table "t", then IdList.a[0].idx==k.
+*/
+struct IdList {
+  struct IdList_item {
+    char *zName;      /* Name of the identifier */
+    int idx;          /* Index in some Table.aCol[] of a column named zName */
+  } *a;
+  int nId;         /* Number of identifiers on the list */
+  int nAlloc;      /* Number of entries allocated for a[] below */
+};
+
+/*
+** The bitmask datatype defined below is used for various optimizations.
+**
+** Changing this from a 64-bit to a 32-bit type limits the number of
+** tables in a join to 32 instead of 64.  But it also reduces the size
+** of the library by 738 bytes on ix86.
+*/
+typedef u64 Bitmask;
+
+/*
+** The number of bits in a Bitmask.  "BMS" means "BitMask Size".
+*/
+#define BMS  ((int)(sizeof(Bitmask)*8))
+
+/*
+** The following structure describes the FROM clause of a SELECT statement.
+** Each table or subquery in the FROM clause is a separate element of
+** the SrcList.a[] array.
+**
+** With the addition of multiple database support, the following structure
+** can also be used to describe a particular table such as the table that
+** is modified by an INSERT, DELETE, or UPDATE statement.  In standard SQL,
+** such a table must be a simple name: ID.  But in SQLite, the table can
+** now be identified by a database name, a dot, then the table name: ID.ID.
+**
+** The jointype starts out showing the join type between the current table
+** and the next table on the list.  The parser builds the list this way.
+** But sqlite3SrcListShiftJoinType() later shifts the jointypes so that each
+** jointype expresses the join between the table and the previous table.
+**
+** In the colUsed field, the high-order bit (bit 63) is set if the table
+** contains more than 63 columns and the 64-th or later column is used.
+*/
+struct SrcList {
+  i16 nSrc;        /* Number of tables or subqueries in the FROM clause */
+  i16 nAlloc;      /* Number of entries allocated in a[] below */
+  struct SrcList_item {
+    char *zDatabase;  /* Name of database holding this table */
+    char *zName;      /* Name of the table */
+    char *zAlias;     /* The "B" part of a "A AS B" phrase.  zName is the "A" */
+    Table *pTab;      /* An SQL table corresponding to zName */
+    Select *pSelect;  /* A SELECT statement used in place of a table name */
+    u8 isPopulated;   /* Temporary table associated with SELECT is populated */
+    u8 jointype;      /* Type of join between this able and the previous */
+    u8 notIndexed;    /* True if there is a NOT INDEXED clause */
+#ifndef SQLITE_OMIT_EXPLAIN
+    u8 iSelectId;     /* If pSelect!=0, the id of the sub-select in EQP */
+#endif
+    int iCursor;      /* The VDBE cursor number used to access this table */
+    Expr *pOn;        /* The ON clause of a join */
+    IdList *pUsing;   /* The USING clause of a join */
+    Bitmask colUsed;  /* Bit N (1<<N) set if column N of pTab is used */
+    char *zIndex;     /* Identifier from "INDEXED BY <zIndex>" clause */
+    Index *pIndex;    /* Index structure corresponding to zIndex, if any */
+  } a[1];             /* One entry for each identifier on the list */
+};
+
+/*
+** Permitted values of the SrcList.a.jointype field
+*/
+#define JT_INNER     0x0001    /* Any kind of inner or cross join */
+#define JT_CROSS     0x0002    /* Explicit use of the CROSS keyword */
+#define JT_NATURAL   0x0004    /* True for a "natural" join */
+#define JT_LEFT      0x0008    /* Left outer join */
+#define JT_RIGHT     0x0010    /* Right outer join */
+#define JT_OUTER     0x0020    /* The "OUTER" keyword is present */
+#define JT_ERROR     0x0040    /* unknown or unsupported join type */
+
+
+/*
+** A WherePlan object holds information that describes a lookup
+** strategy.
+**
+** This object is intended to be opaque outside of the where.c module.
+** It is included here only so that that compiler will know how big it
+** is.  None of the fields in this object should be used outside of
+** the where.c module.
+**
+** Within the union, pIdx is only used when wsFlags&WHERE_INDEXED is true.
+** pTerm is only used when wsFlags&WHERE_MULTI_OR is true.  And pVtabIdx
+** is only used when wsFlags&WHERE_VIRTUALTABLE is true.  It is never the
+** case that more than one of these conditions is true.
+*/
+struct WherePlan {
+  u32 wsFlags;                   /* WHERE_* flags that describe the strategy */
+  u32 nEq;                       /* Number of == constraints */
+  double nRow;                   /* Estimated number of rows (for EQP) */
+  union {
+    Index *pIdx;                   /* Index when WHERE_INDEXED is true */
+    struct WhereTerm *pTerm;       /* WHERE clause term for OR-search */
+    sqlite3_index_info *pVtabIdx;  /* Virtual table index to use */
+  } u;
+};
+
+/*
+** For each nested loop in a WHERE clause implementation, the WhereInfo
+** structure contains a single instance of this structure.  This structure
+** is intended to be private the the where.c module and should not be
+** access or modified by other modules.
+**
+** The pIdxInfo field is used to help pick the best index on a
+** virtual table.  The pIdxInfo pointer contains indexing
+** information for the i-th table in the FROM clause before reordering.
+** All the pIdxInfo pointers are freed by whereInfoFree() in where.c.
+** All other information in the i-th WhereLevel object for the i-th table
+** after FROM clause ordering.
+*/
+struct WhereLevel {
+  WherePlan plan;       /* query plan for this element of the FROM clause */
+  int iLeftJoin;        /* Memory cell used to implement LEFT OUTER JOIN */
+  int iTabCur;          /* The VDBE cursor used to access the table */
+  int iIdxCur;          /* The VDBE cursor used to access pIdx */
+  int addrBrk;          /* Jump here to break out of the loop */
+  int addrNxt;          /* Jump here to start the next IN combination */
+  int addrCont;         /* Jump here to continue with the next loop cycle */
+  int addrFirst;        /* First instruction of interior of the loop */
+  u8 iFrom;             /* Which entry in the FROM clause */
+  u8 op, p5;            /* Opcode and P5 of the opcode that ends the loop */
+  int p1, p2;           /* Operands of the opcode used to ends the loop */
+  union {               /* Information that depends on plan.wsFlags */
+    struct {
+      int nIn;              /* Number of entries in aInLoop[] */
+      struct InLoop {
+        int iCur;              /* The VDBE cursor used by this IN operator */
+        int addrInTop;         /* Top of the IN loop */
+      } *aInLoop;           /* Information about each nested IN operator */
+    } in;                 /* Used when plan.wsFlags&WHERE_IN_ABLE */
+  } u;
+
+  /* The following field is really not part of the current level.  But
+  ** we need a place to cache virtual table index information for each
+  ** virtual table in the FROM clause and the WhereLevel structure is
+  ** a convenient place since there is one WhereLevel for each FROM clause
+  ** element.
+  */
+  sqlite3_index_info *pIdxInfo;  /* Index info for n-th source table */
+};
+
+/*
+** Flags appropriate for the wctrlFlags parameter of sqlite3WhereBegin()
+** and the WhereInfo.wctrlFlags member.
+*/
+#define WHERE_ORDERBY_NORMAL   0x0000 /* No-op */
+#define WHERE_ORDERBY_MIN      0x0001 /* ORDER BY processing for min() func */
+#define WHERE_ORDERBY_MAX      0x0002 /* ORDER BY processing for max() func */
+#define WHERE_ONEPASS_DESIRED  0x0004 /* Want to do one-pass UPDATE/DELETE */
+#define WHERE_DUPLICATES_OK    0x0008 /* Ok to return a row more than once */
+#define WHERE_OMIT_OPEN        0x0010 /* Table cursors are already open */
+#define WHERE_OMIT_CLOSE       0x0020 /* Omit close of table & index cursors */
+#define WHERE_FORCE_TABLE      0x0040 /* Do not use an index-only search */
+#define WHERE_ONETABLE_ONLY    0x0080 /* Only code the 1st table in pTabList */
+
+/*
+** The WHERE clause processing routine has two halves.  The
+** first part does the start of the WHERE loop and the second
+** half does the tail of the WHERE loop.  An instance of
+** this structure is returned by the first half and passed
+** into the second half to give some continuity.
+*/
+struct WhereInfo {
+  Parse *pParse;       /* Parsing and code generating context */
+  u16 wctrlFlags;      /* Flags originally passed to sqlite3WhereBegin() */
+  u8 okOnePass;        /* Ok to use one-pass algorithm for UPDATE or DELETE */
+  u8 untestedTerms;    /* Not all WHERE terms resolved by outer loop */
+  SrcList *pTabList;             /* List of tables in the join */
+  int iTop;                      /* The very beginning of the WHERE loop */
+  int iContinue;                 /* Jump here to continue with next record */
+  int iBreak;                    /* Jump here to break out of the loop */
+  int nLevel;                    /* Number of nested loop */
+  struct WhereClause *pWC;       /* Decomposition of the WHERE clause */
+  double savedNQueryLoop;        /* pParse->nQueryLoop outside the WHERE loop */
+  double nRowOut;                /* Estimated number of output rows */
+  WhereLevel a[1];               /* Information about each nest loop in WHERE */
+};
+
+/*
+** A NameContext defines a context in which to resolve table and column
+** names.  The context consists of a list of tables (the pSrcList) field and
+** a list of named expression (pEList).  The named expression list may
+** be NULL.  The pSrc corresponds to the FROM clause of a SELECT or
+** to the table being operated on by INSERT, UPDATE, or DELETE.  The
+** pEList corresponds to the result set of a SELECT and is NULL for
+** other statements.
+**
+** NameContexts can be nested.  When resolving names, the inner-most 
+** context is searched first.  If no match is found, the next outer
+** context is checked.  If there is still no match, the next context
+** is checked.  This process continues until either a match is found
+** or all contexts are check.  When a match is found, the nRef member of
+** the context containing the match is incremented. 
+**
+** Each subquery gets a new NameContext.  The pNext field points to the
+** NameContext in the parent query.  Thus the process of scanning the
+** NameContext list corresponds to searching through successively outer
+** subqueries looking for a match.
+*/
+struct NameContext {
+  Parse *pParse;       /* The parser */
+  SrcList *pSrcList;   /* One or more tables used to resolve names */
+  ExprList *pEList;    /* Optional list of named expressions */
+  int nRef;            /* Number of names resolved by this context */
+  int nErr;            /* Number of errors encountered while resolving names */
+  u8 allowAgg;         /* Aggregate functions allowed here */
+  u8 hasAgg;           /* True if aggregates are seen */
+  u8 isCheck;          /* True if resolving names in a CHECK constraint */
+  int nDepth;          /* Depth of subquery recursion. 1 for no recursion */
+  AggInfo *pAggInfo;   /* Information about aggregates at this level */
+  NameContext *pNext;  /* Next outer name context.  NULL for outermost */
+};
+
+/*
+** An instance of the following structure contains all information
+** needed to generate code for a single SELECT statement.
+**
+** nLimit is set to -1 if there is no LIMIT clause.  nOffset is set to 0.
+** If there is a LIMIT clause, the parser sets nLimit to the value of the
+** limit and nOffset to the value of the offset (or 0 if there is not
+** offset).  But later on, nLimit and nOffset become the memory locations
+** in the VDBE that record the limit and offset counters.
+**
+** addrOpenEphm[] entries contain the address of OP_OpenEphemeral opcodes.
+** These addresses must be stored so that we can go back and fill in
+** the P4_KEYINFO and P2 parameters later.  Neither the KeyInfo nor
+** the number of columns in P2 can be computed at the same time
+** as the OP_OpenEphm instruction is coded because not
+** enough information about the compound query is known at that point.
+** The KeyInfo for addrOpenTran[0] and [1] contains collating sequences
+** for the result set.  The KeyInfo for addrOpenTran[2] contains collating
+** sequences for the ORDER BY clause.
+*/
+struct Select {
+  ExprList *pEList;      /* The fields of the result */
+  u8 op;                 /* One of: TK_UNION TK_ALL TK_INTERSECT TK_EXCEPT */
+  char affinity;         /* MakeRecord with this affinity for SRT_Set */
+  u16 selFlags;          /* Various SF_* values */
+  SrcList *pSrc;         /* The FROM clause */
+  Expr *pWhere;          /* The WHERE clause */
+  ExprList *pGroupBy;    /* The GROUP BY clause */
+  Expr *pHaving;         /* The HAVING clause */
+  ExprList *pOrderBy;    /* The ORDER BY clause */
+  Select *pPrior;        /* Prior select in a compound select statement */
+  Select *pNext;         /* Next select to the left in a compound */
+  Select *pRightmost;    /* Right-most select in a compound select statement */
+  Expr *pLimit;          /* LIMIT expression. NULL means not used. */
+  Expr *pOffset;         /* OFFSET expression. NULL means not used. */
+  int iLimit, iOffset;   /* Memory registers holding LIMIT & OFFSET counters */
+  int addrOpenEphm[3];   /* OP_OpenEphem opcodes related to this select */
+  double nSelectRow;     /* Estimated number of result rows */
+};
+
+/*
+** Allowed values for Select.selFlags.  The "SF" prefix stands for
+** "Select Flag".
+*/
+#define SF_Distinct        0x0001  /* Output should be DISTINCT */
+#define SF_Resolved        0x0002  /* Identifiers have been resolved */
+#define SF_Aggregate       0x0004  /* Contains aggregate functions */
+#define SF_UsesEphemeral   0x0008  /* Uses the OpenEphemeral opcode */
+#define SF_Expanded        0x0010  /* sqlite3SelectExpand() called on this */
+#define SF_HasTypeInfo     0x0020  /* FROM subqueries have Table metadata */
+
+
+/*
+** The results of a select can be distributed in several ways.  The
+** "SRT" prefix means "SELECT Result Type".
+*/
+#define SRT_Union        1  /* Store result as keys in an index */
+#define SRT_Except       2  /* Remove result from a UNION index */
+#define SRT_Exists       3  /* Store 1 if the result is not empty */
+#define SRT_Discard      4  /* Do not save the results anywhere */
+
+/* The ORDER BY clause is ignored for all of the above */
+#define IgnorableOrderby(X) ((X->eDest)<=SRT_Discard)
+
+#define SRT_Output       5  /* Output each row of result */
+#define SRT_Mem          6  /* Store result in a memory cell */
+#define SRT_Set          7  /* Store results as keys in an index */
+#define SRT_Table        8  /* Store result as data with an automatic rowid */
+#define SRT_EphemTab     9  /* Create transient tab and store like SRT_Table */
+#define SRT_Coroutine   10  /* Generate a single row of result */
+
+/*
+** A structure used to customize the behavior of sqlite3Select(). See
+** comments above sqlite3Select() for details.
+*/
+typedef struct SelectDest SelectDest;
+struct SelectDest {
+  u8 eDest;         /* How to dispose of the results */
+  u8 affinity;      /* Affinity used when eDest==SRT_Set */
+  int iParm;        /* A parameter used by the eDest disposal method */
+  int iMem;         /* Base register where results are written */
+  int nMem;         /* Number of registers allocated */
+};
+
+/*
+** During code generation of statements that do inserts into AUTOINCREMENT 
+** tables, the following information is attached to the Table.u.autoInc.p
+** pointer of each autoincrement table to record some side information that
+** the code generator needs.  We have to keep per-table autoincrement
+** information in case inserts are down within triggers.  Triggers do not
+** normally coordinate their activities, but we do need to coordinate the
+** loading and saving of autoincrement information.
+*/
+struct AutoincInfo {
+  AutoincInfo *pNext;   /* Next info block in a list of them all */
+  Table *pTab;          /* Table this info block refers to */
+  int iDb;              /* Index in sqlite3.aDb[] of database holding pTab */
+  int regCtr;           /* Memory register holding the rowid counter */
+};
+
+/*
+** Size of the column cache
+*/
+#ifndef SQLITE_N_COLCACHE
+# define SQLITE_N_COLCACHE 10
+#endif
+
+/*
+** At least one instance of the following structure is created for each 
+** trigger that may be fired while parsing an INSERT, UPDATE or DELETE
+** statement. All such objects are stored in the linked list headed at
+** Parse.pTriggerPrg and deleted once statement compilation has been
+** completed.
+**
+** A Vdbe sub-program that implements the body and WHEN clause of trigger
+** TriggerPrg.pTrigger, assuming a default ON CONFLICT clause of
+** TriggerPrg.orconf, is stored in the TriggerPrg.pProgram variable.
+** The Parse.pTriggerPrg list never contains two entries with the same
+** values for both pTrigger and orconf.
+**
+** The TriggerPrg.aColmask[0] variable is set to a mask of old.* columns
+** accessed (or set to 0 for triggers fired as a result of INSERT 
+** statements). Similarly, the TriggerPrg.aColmask[1] variable is set to
+** a mask of new.* columns used by the program.
+*/
+struct TriggerPrg {
+  Trigger *pTrigger;      /* Trigger this program was coded from */
+  int orconf;             /* Default ON CONFLICT policy */
+  SubProgram *pProgram;   /* Program implementing pTrigger/orconf */
+  u32 aColmask[2];        /* Masks of old.*, new.* columns accessed */
+  TriggerPrg *pNext;      /* Next entry in Parse.pTriggerPrg list */
+};
+
+/*
+** The yDbMask datatype for the bitmask of all attached databases.
+*/
+#if SQLITE_MAX_ATTACHED>30
+  typedef sqlite3_uint64 yDbMask;
+#else
+  typedef unsigned int yDbMask;
+#endif
+
+/*
+** An SQL parser context.  A copy of this structure is passed through
+** the parser and down into all the parser action routine in order to
+** carry around information that is global to the entire parse.
+**
+** The structure is divided into two parts.  When the parser and code
+** generate call themselves recursively, the first part of the structure
+** is constant but the second part is reset at the beginning and end of
+** each recursion.
+**
+** The nTableLock and aTableLock variables are only used if the shared-cache 
+** feature is enabled (if sqlite3Tsd()->useSharedData is true). They are
+** used to store the set of table-locks required by the statement being
+** compiled. Function sqlite3TableLock() is used to add entries to the
+** list.
+*/
+struct Parse {
+  sqlite3 *db;         /* The main database structure */
+  int rc;              /* Return code from execution */
+  char *zErrMsg;       /* An error message */
+  Vdbe *pVdbe;         /* An engine for executing database bytecode */
+  u8 colNamesSet;      /* TRUE after OP_ColumnName has been issued to pVdbe */
+  u8 nameClash;        /* A permanent table name clashes with temp table name */
+  u8 checkSchema;      /* Causes schema cookie check after an error */
+  u8 nested;           /* Number of nested calls to the parser/code generator */
+  u8 parseError;       /* True after a parsing error.  Ticket #1794 */
+  u8 nTempReg;         /* Number of temporary registers in aTempReg[] */
+  u8 nTempInUse;       /* Number of aTempReg[] currently checked out */
+  int aTempReg[8];     /* Holding area for temporary registers */
+  int nRangeReg;       /* Size of the temporary register block */
+  int iRangeReg;       /* First register in temporary register block */
+  int nErr;            /* Number of errors seen */
+  int nTab;            /* Number of previously allocated VDBE cursors */
+  int nMem;            /* Number of memory cells used so far */
+  int nSet;            /* Number of sets used so far */
+  int ckBase;          /* Base register of data during check constraints */
+  int iCacheLevel;     /* ColCache valid when aColCache[].iLevel<=iCacheLevel */
+  int iCacheCnt;       /* Counter used to generate aColCache[].lru values */
+  u8 nColCache;        /* Number of entries in the column cache */
+  u8 iColCache;        /* Next entry of the cache to replace */
+  struct yColCache {
+    int iTable;           /* Table cursor number */
+    int iColumn;          /* Table column number */
+    u8 tempReg;           /* iReg is a temp register that needs to be freed */
+    int iLevel;           /* Nesting level */
+    int iReg;             /* Reg with value of this column. 0 means none. */
+    int lru;              /* Least recently used entry has the smallest value */
+  } aColCache[SQLITE_N_COLCACHE];  /* One for each column cache entry */
+  yDbMask writeMask;   /* Start a write transaction on these databases */
+  yDbMask cookieMask;  /* Bitmask of schema verified databases */
+  u8 isMultiWrite;     /* True if statement may affect/insert multiple rows */
+  u8 mayAbort;         /* True if statement may throw an ABORT exception */
+  int cookieGoto;      /* Address of OP_Goto to cookie verifier subroutine */
+  int cookieValue[SQLITE_MAX_ATTACHED+2];  /* Values of cookies to verify */
+#ifndef SQLITE_OMIT_SHARED_CACHE
+  int nTableLock;        /* Number of locks in aTableLock */
+  TableLock *aTableLock; /* Required table locks for shared-cache mode */
+#endif
+  int regRowid;        /* Register holding rowid of CREATE TABLE entry */
+  int regRoot;         /* Register holding root page number for new objects */
+  AutoincInfo *pAinc;  /* Information about AUTOINCREMENT counters */
+  int nMaxArg;         /* Max args passed to user function by sub-program */
+
+  /* Information used while coding trigger programs. */
+  Parse *pToplevel;    /* Parse structure for main program (or NULL) */
+  Table *pTriggerTab;  /* Table triggers are being coded for */
+  u32 oldmask;         /* Mask of old.* columns referenced */
+  u32 newmask;         /* Mask of new.* columns referenced */
+  u8 eTriggerOp;       /* TK_UPDATE, TK_INSERT or TK_DELETE */
+  u8 eOrconf;          /* Default ON CONFLICT policy for trigger steps */
+  u8 disableTriggers;  /* True to disable triggers */
+  double nQueryLoop;   /* Estimated number of iterations of a query */
+
+  /* Above is constant between recursions.  Below is reset before and after
+  ** each recursion */
+
+  int nVar;            /* Number of '?' variables seen in the SQL so far */
+  int nVarExpr;        /* Number of used slots in apVarExpr[] */
+  int nVarExprAlloc;   /* Number of allocated slots in apVarExpr[] */
+  Expr **apVarExpr;    /* Pointers to :aaa and $aaaa wildcard expressions */
+  Vdbe *pReprepare;    /* VM being reprepared (sqlite3Reprepare()) */
+  int nAlias;          /* Number of aliased result set columns */
+  int nAliasAlloc;     /* Number of allocated slots for aAlias[] */
+  int *aAlias;         /* Register used to hold aliased result */
+  u8 explain;          /* True if the EXPLAIN flag is found on the query */
+  Token sNameToken;    /* Token with unqualified schema object name */
+  Token sLastToken;    /* The last token parsed */
+  const char *zTail;   /* All SQL text past the last semicolon parsed */
+  Table *pNewTable;    /* A table being constructed by CREATE TABLE */
+  Trigger *pNewTrigger;     /* Trigger under construct by a CREATE TRIGGER */
+  const char *zAuthContext; /* The 6th parameter to db->xAuth callbacks */
+#ifndef SQLITE_OMIT_VIRTUALTABLE
+  Token sArg;                /* Complete text of a module argument */
+  u8 declareVtab;            /* True if inside sqlite3_declare_vtab() */
+  int nVtabLock;             /* Number of virtual tables to lock */
+  Table **apVtabLock;        /* Pointer to virtual tables needing locking */
+#endif
+  int nHeight;            /* Expression tree height of current sub-select */
+  Table *pZombieTab;      /* List of Table objects to delete after code gen */
+  TriggerPrg *pTriggerPrg;    /* Linked list of coded triggers */
+
+#ifndef SQLITE_OMIT_EXPLAIN
+  int iSelectId;
+  int iNextSelectId;
+#endif
+};
+
+#ifdef SQLITE_OMIT_VIRTUALTABLE
+  #define IN_DECLARE_VTAB 0
+#else
+  #define IN_DECLARE_VTAB (pParse->declareVtab)
+#endif
+
+/*
+** An instance of the following structure can be declared on a stack and used
+** to save the Parse.zAuthContext value so that it can be restored later.
+*/
+struct AuthContext {
+  const char *zAuthContext;   /* Put saved Parse.zAuthContext here */
+  Parse *pParse;              /* The Parse structure */
+};
+
+/*
+** Bitfield flags for P5 value in OP_Insert and OP_Delete
+*/
+#define OPFLAG_NCHANGE       0x01    /* Set to update db->nChange */
+#define OPFLAG_LASTROWID     0x02    /* Set to update db->lastRowid */
+#define OPFLAG_ISUPDATE      0x04    /* This OP_Insert is an sql UPDATE */
+#define OPFLAG_APPEND        0x08    /* This is likely to be an append */
+#define OPFLAG_USESEEKRESULT 0x10    /* Try to avoid a seek in BtreeInsert() */
+#define OPFLAG_CLEARCACHE    0x20    /* Clear pseudo-table cache in OP_Column */
+
+/*
+ * Each trigger present in the database schema is stored as an instance of
+ * struct Trigger. 
+ *
+ * Pointers to instances of struct Trigger are stored in two ways.
+ * 1. In the "trigHash" hash table (part of the sqlite3* that represents the 
+ *    database). This allows Trigger structures to be retrieved by name.
+ * 2. All triggers associated with a single table form a linked list, using the
+ *    pNext member of struct Trigger. A pointer to the first element of the
+ *    linked list is stored as the "pTrigger" member of the associated
+ *    struct Table.
+ *
+ * The "step_list" member points to the first element of a linked list
+ * containing the SQL statements specified as the trigger program.
+ */
+struct Trigger {
+  char *zName;            /* The name of the trigger                        */
+  char *table;            /* The table or view to which the trigger applies */
+  u8 op;                  /* One of TK_DELETE, TK_UPDATE, TK_INSERT         */
+  u8 tr_tm;               /* One of TRIGGER_BEFORE, TRIGGER_AFTER */
+  Expr *pWhen;            /* The WHEN clause of the expression (may be NULL) */
+  IdList *pColumns;       /* If this is an UPDATE OF <column-list> trigger,
+                             the <column-list> is stored here */
+  Schema *pSchema;        /* Schema containing the trigger */
+  Schema *pTabSchema;     /* Schema containing the table */
+  TriggerStep *step_list; /* Link list of trigger program steps             */
+  Trigger *pNext;         /* Next trigger associated with the table */
+};
+
+/*
+** A trigger is either a BEFORE or an AFTER trigger.  The following constants
+** determine which. 
+**
+** If there are multiple triggers, you might of some BEFORE and some AFTER.
+** In that cases, the constants below can be ORed together.
+*/
+#define TRIGGER_BEFORE  1
+#define TRIGGER_AFTER   2
+
+/*
+ * An instance of struct TriggerStep is used to store a single SQL statement
+ * that is a part of a trigger-program. 
+ *
+ * Instances of struct TriggerStep are stored in a singly linked list (linked
+ * using the "pNext" member) referenced by the "step_list" member of the 
+ * associated struct Trigger instance. The first element of the linked list is
+ * the first step of the trigger-program.
+ * 
+ * The "op" member indicates whether this is a "DELETE", "INSERT", "UPDATE" or
+ * "SELECT" statement. The meanings of the other members is determined by the 
+ * value of "op" as follows:
+ *
+ * (op == TK_INSERT)
+ * orconf    -> stores the ON CONFLICT algorithm
+ * pSelect   -> If this is an INSERT INTO ... SELECT ... statement, then
+ *              this stores a pointer to the SELECT statement. Otherwise NULL.
+ * target    -> A token holding the quoted name of the table to insert into.
+ * pExprList -> If this is an INSERT INTO ... VALUES ... statement, then
+ *              this stores values to be inserted. Otherwise NULL.
+ * pIdList   -> If this is an INSERT INTO ... (<column-names>) VALUES ... 
+ *              statement, then this stores the column-names to be
+ *              inserted into.
+ *
+ * (op == TK_DELETE)
+ * target    -> A token holding the quoted name of the table to delete from.
+ * pWhere    -> The WHERE clause of the DELETE statement if one is specified.
+ *              Otherwise NULL.
+ * 
+ * (op == TK_UPDATE)
+ * target    -> A token holding the quoted name of the table to update rows of.
+ * pWhere    -> The WHERE clause of the UPDATE statement if one is specified.
+ *              Otherwise NULL.
+ * pExprList -> A list of the columns to update and the expressions to update
+ *              them to. See sqlite3Update() documentation of "pChanges"
+ *              argument.
+ * 
+ */
+struct TriggerStep {
+  u8 op;               /* One of TK_DELETE, TK_UPDATE, TK_INSERT, TK_SELECT */
+  u8 orconf;           /* OE_Rollback etc. */
+  Trigger *pTrig;      /* The trigger that this step is a part of */
+  Select *pSelect;     /* SELECT statment or RHS of INSERT INTO .. SELECT ... */
+  Token target;        /* Target table for DELETE, UPDATE, INSERT */
+  Expr *pWhere;        /* The WHERE clause for DELETE or UPDATE steps */
+  ExprList *pExprList; /* SET clause for UPDATE.  VALUES clause for INSERT */
+  IdList *pIdList;     /* Column names for INSERT */
+  TriggerStep *pNext;  /* Next in the link-list */
+  TriggerStep *pLast;  /* Last element in link-list. Valid for 1st elem only */
+};
+
+/*
+** The following structure contains information used by the sqliteFix...
+** routines as they walk the parse tree to make database references
+** explicit.  
+*/
+typedef struct DbFixer DbFixer;
+struct DbFixer {
+  Parse *pParse;      /* The parsing context.  Error messages written here */
+  const char *zDb;    /* Make sure all objects are contained in this database */
+  const char *zType;  /* Type of the container - used for error messages */
+  const Token *pName; /* Name of the container - used for error messages */
+};
+
+/*
+** An objected used to accumulate the text of a string where we
+** do not necessarily know how big the string will be in the end.
+*/
+struct StrAccum {
+  sqlite3 *db;         /* Optional database for lookaside.  Can be NULL */
+  char *zBase;         /* A base allocation.  Not from malloc. */
+  char *zText;         /* The string collected so far */
+  int  nChar;          /* Length of the string so far */
+  int  nAlloc;         /* Amount of space allocated in zText */
+  int  mxAlloc;        /* Maximum allowed string length */
+  u8   mallocFailed;   /* Becomes true if any memory allocation fails */
+  u8   useMalloc;      /* 0: none,  1: sqlite3DbMalloc,  2: sqlite3_malloc */
+  u8   tooBig;         /* Becomes true if string size exceeds limits */
+};
+
+/*
+** A pointer to this structure is used to communicate information
+** from sqlite3Init and OP_ParseSchema into the sqlite3InitCallback.
+*/
+typedef struct {
+  sqlite3 *db;        /* The database being initialized */
+  int iDb;            /* 0 for main database.  1 for TEMP, 2.. for ATTACHed */
+  char **pzErrMsg;    /* Error message stored here */
+  int rc;             /* Result code stored here */
+} InitData;
+
+/*
+** Structure containing global configuration data for the SQLite library.
+**
+** This structure also contains some state information.
+*/
+struct Sqlite3Config {
+  int bMemstat;                     /* True to enable memory status */
+  int bCoreMutex;                   /* True to enable core mutexing */
+  int bFullMutex;                   /* True to enable full mutexing */
+  int mxStrlen;                     /* Maximum string length */
+  int szLookaside;                  /* Default lookaside buffer size */
+  int nLookaside;                   /* Default lookaside buffer count */
+  sqlite3_mem_methods m;            /* Low-level memory allocation interface */
+  sqlite3_mutex_methods mutex;      /* Low-level mutex interface */
+  sqlite3_pcache_methods pcache;    /* Low-level page-cache interface */
+  void *pHeap;                      /* Heap storage space */
+  int nHeap;                        /* Size of pHeap[] */
+  int mnReq, mxReq;                 /* Min and max heap requests sizes */
+  void *pScratch;                   /* Scratch memory */
+  int szScratch;                    /* Size of each scratch buffer */
+  int nScratch;                     /* Number of scratch buffers */
+  void *pPage;                      /* Page cache memory */
+  int szPage;                       /* Size of each page in pPage[] */
+  int nPage;                        /* Number of pages in pPage[] */
+  int mxParserStack;                /* maximum depth of the parser stack */
+  int sharedCacheEnabled;           /* true if shared-cache mode enabled */
+  /* The above might be initialized to non-zero.  The following need to always
+  ** initially be zero, however. */
+  int isInit;                       /* True after initialization has finished */
+  int inProgress;                   /* True while initialization in progress */
+  int isMutexInit;                  /* True after mutexes are initialized */
+  int isMallocInit;                 /* True after malloc is initialized */
+  int isPCacheInit;                 /* True after malloc is initialized */
+  sqlite3_mutex *pInitMutex;        /* Mutex used by sqlite3_initialize() */
+  int nRefInitMutex;                /* Number of users of pInitMutex */
+  void (*xLog)(void*,int,const char*); /* Function for logging */
+  void *pLogArg;                       /* First argument to xLog() */
+};
+
+/*
+** Context pointer passed down through the tree-walk.
+*/
+struct Walker {
+  int (*xExprCallback)(Walker*, Expr*);     /* Callback for expressions */
+  int (*xSelectCallback)(Walker*,Select*);  /* Callback for SELECTs */
+  Parse *pParse;                            /* Parser context.  */
+  union {                                   /* Extra data for callback */
+    NameContext *pNC;                          /* Naming context */
+    int i;                                     /* Integer value */
+  } u;
+};
+
+/* Forward declarations */
+int sqlite3WalkExpr(Walker*, Expr*);
+int sqlite3WalkExprList(Walker*, ExprList*);
+int sqlite3WalkSelect(Walker*, Select*);
+int sqlite3WalkSelectExpr(Walker*, Select*);
+int sqlite3WalkSelectFrom(Walker*, Select*);
+
+/*
+** Return code from the parse-tree walking primitives and their
+** callbacks.
+*/
+#define WRC_Continue    0   /* Continue down into children */
+#define WRC_Prune       1   /* Omit children but continue walking siblings */
+#define WRC_Abort       2   /* Abandon the tree walk */
+
+/*
+** Assuming zIn points to the first byte of a UTF-8 character,
+** advance zIn to point to the first byte of the next UTF-8 character.
+*/
+#define SQLITE_SKIP_UTF8(zIn) {                        \
+  if( (*(zIn++))>=0xc0 ){                              \
+    while( (*zIn & 0xc0)==0x80 ){ zIn++; }             \
+  }                                                    \
+}
+
+/*
+** The SQLITE_*_BKPT macros are substitutes for the error codes with
+** the same name but without the _BKPT suffix.  These macros invoke
+** routines that report the line-number on which the error originated
+** using sqlite3_log().  The routines also provide a convenient place
+** to set a debugger breakpoint.
+*/
+int sqlite3CorruptError(int);
+int sqlite3MisuseError(int);
+int sqlite3CantopenError(int);
+#define SQLITE_CORRUPT_BKPT sqlite3CorruptError(__LINE__)
+#define SQLITE_MISUSE_BKPT sqlite3MisuseError(__LINE__)
+#define SQLITE_CANTOPEN_BKPT sqlite3CantopenError(__LINE__)
+
+
+/*
+** FTS4 is really an extension for FTS3.  It is enabled using the
+** SQLITE_ENABLE_FTS3 macro.  But to avoid confusion we also all
+** the SQLITE_ENABLE_FTS4 macro to serve as an alisse for SQLITE_ENABLE_FTS3.
+*/
+#if defined(SQLITE_ENABLE_FTS4) && !defined(SQLITE_ENABLE_FTS3)
+# define SQLITE_ENABLE_FTS3
+#endif
+
+/*
+** The ctype.h header is needed for non-ASCII systems.  It is also
+** needed by FTS3 when FTS3 is included in the amalgamation.
+*/
+#if !defined(SQLITE_ASCII) || \
+    (defined(SQLITE_ENABLE_FTS3) && defined(SQLITE_AMALGAMATION))
+# include <ctype.h>
+#endif
+
+/*
+** The CoreServices.h and CoreFoundation.h headers are needed for excluding a
+** -journal file from Time Machine backups when its associated database has
+** previously been excluded by the client code.
+*/
+#if defined(__APPLE__)
+#include <CoreServices/CoreServices.h>
+#include <CoreFoundation/CoreFoundation.h>
+#endif
+
+/*
+** The following macros mimic the standard library functions toupper(),
+** isspace(), isalnum(), isdigit() and isxdigit(), respectively. The
+** sqlite versions only work for ASCII characters, regardless of locale.
+*/
+#ifdef SQLITE_ASCII
+# define sqlite3Toupper(x)  ((x)&~(sqlite3CtypeMap[(unsigned char)(x)]&0x20))
+# define sqlite3Isspace(x)   (sqlite3CtypeMap[(unsigned char)(x)]&0x01)
+# define sqlite3Isalnum(x)   (sqlite3CtypeMap[(unsigned char)(x)]&0x06)
+# define sqlite3Isalpha(x)   (sqlite3CtypeMap[(unsigned char)(x)]&0x02)
+# define sqlite3Isdigit(x)   (sqlite3CtypeMap[(unsigned char)(x)]&0x04)
+# define sqlite3Isxdigit(x)  (sqlite3CtypeMap[(unsigned char)(x)]&0x08)
+# define sqlite3Tolower(x)   (sqlite3UpperToLower[(unsigned char)(x)])
+#else
+# define sqlite3Toupper(x)   toupper((unsigned char)(x))
+# define sqlite3Isspace(x)   isspace((unsigned char)(x))
+# define sqlite3Isalnum(x)   isalnum((unsigned char)(x))
+# define sqlite3Isalpha(x)   isalpha((unsigned char)(x))
+# define sqlite3Isdigit(x)   isdigit((unsigned char)(x))
+# define sqlite3Isxdigit(x)  isxdigit((unsigned char)(x))
+# define sqlite3Tolower(x)   tolower((unsigned char)(x))
+#endif
+
+/*
+** Internal function prototypes
+*/
+int sqlite3StrICmp(const char *, const char *);
+int sqlite3Strlen30(const char*);
+#define sqlite3StrNICmp sqlite3_strnicmp
+
+int sqlite3MallocInit(void);
+void sqlite3MallocEnd(void);
+void *sqlite3Malloc(int);
+void *sqlite3MallocZero(int);
+void *sqlite3DbMallocZero(sqlite3*, int);
+void *sqlite3DbMallocRaw(sqlite3*, int);
+char *sqlite3DbStrDup(sqlite3*,const char*);
+char *sqlite3DbStrNDup(sqlite3*,const char*, int);
+void *sqlite3Realloc(void*, int);
+void *sqlite3DbReallocOrFree(sqlite3 *, void *, int);
+void *sqlite3DbRealloc(sqlite3 *, void *, int);
+void sqlite3DbFree(sqlite3*, void*);
+int sqlite3MallocSize(void*);
+int sqlite3DbMallocSize(sqlite3*, void*);
+void *sqlite3ScratchMalloc(int);
+void sqlite3ScratchFree(void*);
+void *sqlite3PageMalloc(int);
+void sqlite3PageFree(void*);
+void sqlite3MemSetDefault(void);
+void sqlite3BenignMallocHooks(void (*)(void), void (*)(void));
+int sqlite3HeapNearlyFull(void);
+
+/*
+** On systems with ample stack space and that support alloca(), make
+** use of alloca() to obtain space for large automatic objects.  By default,
+** obtain space from malloc().
+**
+** The alloca() routine never returns NULL.  This will cause code paths
+** that deal with sqlite3StackAlloc() failures to be unreachable.
+*/
+#ifdef SQLITE_USE_ALLOCA
+# define sqlite3StackAllocRaw(D,N)   alloca(N)
+# define sqlite3StackAllocZero(D,N)  memset(alloca(N), 0, N)
+# define sqlite3StackFree(D,P)       
+#else
+# define sqlite3StackAllocRaw(D,N)   sqlite3DbMallocRaw(D,N)
+# define sqlite3StackAllocZero(D,N)  sqlite3DbMallocZero(D,N)
+# define sqlite3StackFree(D,P)       sqlite3DbFree(D,P)
+#endif
+
+#ifdef SQLITE_ENABLE_MEMSYS3
+const sqlite3_mem_methods *sqlite3MemGetMemsys3(void);
+#endif
+#ifdef SQLITE_ENABLE_MEMSYS5
+const sqlite3_mem_methods *sqlite3MemGetMemsys5(void);
+#endif
+
+
+#ifndef SQLITE_MUTEX_OMIT
+  sqlite3_mutex_methods const *sqlite3DefaultMutex(void);
+  sqlite3_mutex_methods const *sqlite3NoopMutex(void);
+  sqlite3_mutex *sqlite3MutexAlloc(int);
+  int sqlite3MutexInit(void);
+  int sqlite3MutexEnd(void);
+#endif
+
+int sqlite3StatusValue(int);
+void sqlite3StatusAdd(int, int);
+void sqlite3StatusSet(int, int);
+
+#ifndef SQLITE_OMIT_FLOATING_POINT
+  int sqlite3IsNaN(double);
+#else
+# define sqlite3IsNaN(X)  0
+#endif
+
+void sqlite3VXPrintf(StrAccum*, int, const char*, va_list);
+#ifndef SQLITE_OMIT_TRACE
+void sqlite3XPrintf(StrAccum*, const char*, ...);
+#endif
+char *sqlite3MPrintf(sqlite3*,const char*, ...);
+char *sqlite3VMPrintf(sqlite3*,const char*, va_list);
+char *sqlite3MAppendf(sqlite3*,char*,const char*,...);
+#if defined(SQLITE_TEST) || defined(SQLITE_DEBUG)
+  void sqlite3DebugPrintf(const char*, ...);
+#endif
+#if defined(SQLITE_TEST)
+  void *sqlite3TestTextToPtr(const char*);
+#endif
+void sqlite3SetString(char **, sqlite3*, const char*, ...);
+void sqlite3ErrorMsg(Parse*, const char*, ...);
+int sqlite3Dequote(char*);
+int sqlite3KeywordCode(const unsigned char*, int);
+int sqlite3RunParser(Parse*, const char*, char **);
+void sqlite3FinishCoding(Parse*);
+int sqlite3GetTempReg(Parse*);
+void sqlite3ReleaseTempReg(Parse*,int);
+int sqlite3GetTempRange(Parse*,int);
+void sqlite3ReleaseTempRange(Parse*,int,int);
+Expr *sqlite3ExprAlloc(sqlite3*,int,const Token*,int);
+Expr *sqlite3Expr(sqlite3*,int,const char*);
+void sqlite3ExprAttachSubtrees(sqlite3*,Expr*,Expr*,Expr*);
+Expr *sqlite3PExpr(Parse*, int, Expr*, Expr*, const Token*);
+Expr *sqlite3ExprAnd(sqlite3*,Expr*, Expr*);
+Expr *sqlite3ExprFunction(Parse*,ExprList*, Token*);
+void sqlite3ExprAssignVarNumber(Parse*, Expr*);
+void sqlite3ExprDelete(sqlite3*, Expr*);
+ExprList *sqlite3ExprListAppend(Parse*,ExprList*,Expr*);
+void sqlite3ExprListSetName(Parse*,ExprList*,Token*,int);
+void sqlite3ExprListSetSpan(Parse*,ExprList*,ExprSpan*);
+void sqlite3ExprListDelete(sqlite3*, ExprList*);
+int sqlite3Init(sqlite3*, char**);
+int sqlite3InitCallback(void*, int, char**, char**);
+void sqlite3Pragma(Parse*,Token*,Token*,Token*,int);
+void sqlite3ResetInternalSchema(sqlite3*, int);
+void sqlite3BeginParse(Parse*,int);
+void sqlite3CommitInternalChanges(sqlite3*);
+Table *sqlite3ResultSetOfSelect(Parse*,Select*);
+void sqlite3OpenMasterTable(Parse *, int);
+void sqlite3StartTable(Parse*,Token*,Token*,int,int,int,int);
+void sqlite3AddColumn(Parse*,Token*);
+void sqlite3AddNotNull(Parse*, int);
+void sqlite3AddPrimaryKey(Parse*, ExprList*, int, int, int);
+void sqlite3AddCheckConstraint(Parse*, Expr*);
+void sqlite3AddColumnType(Parse*,Token*);
+void sqlite3AddDefaultValue(Parse*,ExprSpan*);
+void sqlite3AddCollateType(Parse*, Token*);
+void sqlite3EndTable(Parse*,Token*,Token*,Select*);
+
+Bitvec *sqlite3BitvecCreate(u32);
+int sqlite3BitvecTest(Bitvec*, u32);
+int sqlite3BitvecSet(Bitvec*, u32);
+void sqlite3BitvecClear(Bitvec*, u32, void*);
+void sqlite3BitvecDestroy(Bitvec*);
+u32 sqlite3BitvecSize(Bitvec*);
+int sqlite3BitvecBuiltinTest(int,int*);
+
+RowSet *sqlite3RowSetInit(sqlite3*, void*, unsigned int);
+void sqlite3RowSetClear(RowSet*);
+void sqlite3RowSetInsert(RowSet*, i64);
+int sqlite3RowSetTest(RowSet*, u8 iBatch, i64);
+int sqlite3RowSetNext(RowSet*, i64*);
+
+void sqlite3CreateView(Parse*,Token*,Token*,Token*,Select*,int,int);
+
+#if !defined(SQLITE_OMIT_VIEW) || !defined(SQLITE_OMIT_VIRTUALTABLE)
+  int sqlite3ViewGetColumnNames(Parse*,Table*);
+#else
+# define sqlite3ViewGetColumnNames(A,B) 0
+#endif
+
+void sqlite3DropTable(Parse*, SrcList*, int, int);
+void sqlite3DeleteTable(sqlite3*, Table*);
+#ifndef SQLITE_OMIT_AUTOINCREMENT
+  void sqlite3AutoincrementBegin(Parse *pParse);
+  void sqlite3AutoincrementEnd(Parse *pParse);
+#else
+# define sqlite3AutoincrementBegin(X)
+# define sqlite3AutoincrementEnd(X)
+#endif
+void sqlite3Insert(Parse*, SrcList*, ExprList*, Select*, IdList*, int);
+void *sqlite3ArrayAllocate(sqlite3*,void*,int,int,int*,int*,int*);
+IdList *sqlite3IdListAppend(sqlite3*, IdList*, Token*);
+int sqlite3IdListIndex(IdList*,const char*);
+SrcList *sqlite3SrcListEnlarge(sqlite3*, SrcList*, int, int);
+SrcList *sqlite3SrcListAppend(sqlite3*, SrcList*, Token*, Token*);
+SrcList *sqlite3SrcListAppendFromTerm(Parse*, SrcList*, Token*, Token*,
+                                      Token*, Select*, Expr*, IdList*);
+void sqlite3SrcListIndexedBy(Parse *, SrcList *, Token *);
+int sqlite3IndexedByLookup(Parse *, struct SrcList_item *);
+void sqlite3SrcListShiftJoinType(SrcList*);
+void sqlite3SrcListAssignCursors(Parse*, SrcList*);
+void sqlite3IdListDelete(sqlite3*, IdList*);
+void sqlite3SrcListDelete(sqlite3*, SrcList*);
+Index *sqlite3CreateIndex(Parse*,Token*,Token*,SrcList*,ExprList*,int,Token*,
+                        Token*, int, int);
+void sqlite3DropIndex(Parse*, SrcList*, int);
+int sqlite3Select(Parse*, Select*, SelectDest*);
+Select *sqlite3SelectNew(Parse*,ExprList*,SrcList*,Expr*,ExprList*,
+                         Expr*,ExprList*,int,Expr*,Expr*);
+void sqlite3SelectDelete(sqlite3*, Select*);
+Table *sqlite3SrcListLookup(Parse*, SrcList*);
+int sqlite3IsReadOnly(Parse*, Table*, int);
+void sqlite3OpenTable(Parse*, int iCur, int iDb, Table*, int);
+#if defined(SQLITE_ENABLE_UPDATE_DELETE_LIMIT) && !defined(SQLITE_OMIT_SUBQUERY)
+Expr *sqlite3LimitWhere(Parse *, SrcList *, Expr *, ExprList *, Expr *, Expr *, char *);
+#endif
+void sqlite3DeleteFrom(Parse*, SrcList*, Expr*);
+void sqlite3Update(Parse*, SrcList*, ExprList*, Expr*, int);
+WhereInfo *sqlite3WhereBegin(Parse*, SrcList*, Expr*, ExprList**, u16);
+void sqlite3WhereEnd(WhereInfo*);
+int sqlite3ExprCodeGetColumn(Parse*, Table*, int, int, int);
+void sqlite3ExprCodeGetColumnOfTable(Vdbe*, Table*, int, int, int);
+void sqlite3ExprCodeMove(Parse*, int, int, int);
+void sqlite3ExprCodeCopy(Parse*, int, int, int);
+void sqlite3ExprCacheStore(Parse*, int, int, int);
+void sqlite3ExprCachePush(Parse*);
+void sqlite3ExprCachePop(Parse*, int);
+void sqlite3ExprCacheRemove(Parse*, int, int);
+void sqlite3ExprCacheClear(Parse*);
+void sqlite3ExprCacheAffinityChange(Parse*, int, int);
+int sqlite3ExprCode(Parse*, Expr*, int);
+int sqlite3ExprCodeTemp(Parse*, Expr*, int*);
+int sqlite3ExprCodeTarget(Parse*, Expr*, int);
+int sqlite3ExprCodeAndCache(Parse*, Expr*, int);
+void sqlite3ExprCodeConstants(Parse*, Expr*);
+int sqlite3ExprCodeExprList(Parse*, ExprList*, int, int);
+void sqlite3ExprIfTrue(Parse*, Expr*, int, int);
+void sqlite3ExprIfFalse(Parse*, Expr*, int, int);
+Table *sqlite3FindTable(sqlite3*,const char*, const char*);
+Table *sqlite3LocateTable(Parse*,int isView,const char*, const char*);
+Index *sqlite3FindIndex(sqlite3*,const char*, const char*);
+void sqlite3UnlinkAndDeleteTable(sqlite3*,int,const char*);
+void sqlite3UnlinkAndDeleteIndex(sqlite3*,int,const char*);
+void sqlite3Vacuum(Parse*);
+int sqlite3RunVacuum(char**, sqlite3*);
+char *sqlite3NameFromToken(sqlite3*, Token*);
+int sqlite3ExprCompare(Expr*, Expr*);
+int sqlite3ExprListCompare(ExprList*, ExprList*);
+void sqlite3ExprAnalyzeAggregates(NameContext*, Expr*);
+void sqlite3ExprAnalyzeAggList(NameContext*,ExprList*);
+Vdbe *sqlite3GetVdbe(Parse*);
+void sqlite3PrngSaveState(void);
+void sqlite3PrngRestoreState(void);
+void sqlite3PrngResetState(void);
+void sqlite3RollbackAll(sqlite3*);
+void sqlite3CodeVerifySchema(Parse*, int);
+void sqlite3CodeVerifyNamedSchema(Parse*, const char *zDb);
+void sqlite3BeginTransaction(Parse*, int);
+void sqlite3CommitTransaction(Parse*);
+void sqlite3RollbackTransaction(Parse*);
+void sqlite3Savepoint(Parse*, int, Token*);
+void sqlite3CloseSavepoints(sqlite3 *);
+int sqlite3ExprIsConstant(Expr*);
+int sqlite3ExprIsConstantNotJoin(Expr*);
+int sqlite3ExprIsConstantOrFunction(Expr*);
+int sqlite3ExprIsInteger(Expr*, int*);
+int sqlite3ExprCanBeNull(const Expr*);
+void sqlite3ExprCodeIsNullJump(Vdbe*, const Expr*, int, int);
+int sqlite3ExprNeedsNoAffinityChange(const Expr*, char);
+int sqlite3IsRowid(const char*);
+void sqlite3GenerateRowDelete(Parse*, Table*, int, int, int, Trigger *, int);
+void sqlite3GenerateRowIndexDelete(Parse*, Table*, int, int*);
+int sqlite3GenerateIndexKey(Parse*, Index*, int, int, int);
+void sqlite3GenerateConstraintChecks(Parse*,Table*,int,int,
+                                     int*,int,int,int,int,int*);
+void sqlite3CompleteInsertion(Parse*, Table*, int, int, int*, int, int, int);
+int sqlite3OpenTableAndIndices(Parse*, Table*, int, int);
+void sqlite3BeginWriteOperation(Parse*, int, int);
+void sqlite3MultiWrite(Parse*);
+void sqlite3MayAbort(Parse*);
+void sqlite3HaltConstraint(Parse*, int, char*, int);
+Expr *sqlite3ExprDup(sqlite3*,Expr*,int);
+ExprList *sqlite3ExprListDup(sqlite3*,ExprList*,int);
+SrcList *sqlite3SrcListDup(sqlite3*,SrcList*,int);
+IdList *sqlite3IdListDup(sqlite3*,IdList*);
+Select *sqlite3SelectDup(sqlite3*,Select*,int);
+void sqlite3FuncDefInsert(FuncDefHash*, FuncDef*);
+FuncDef *sqlite3FindFunction(sqlite3*,const char*,int,int,u8,int);
+void sqlite3RegisterBuiltinFunctions(sqlite3*);
+void sqlite3RegisterDateTimeFunctions(void);
+void sqlite3RegisterGlobalFunctions(void);
+int sqlite3SafetyCheckOk(sqlite3*);
+int sqlite3SafetyCheckSickOrOk(sqlite3*);
+void sqlite3ChangeCookie(Parse*, int);
+
+#if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER)
+void sqlite3MaterializeView(Parse*, Table*, Expr*, int);
+#endif
+
+#ifndef SQLITE_OMIT_TRIGGER
+  void sqlite3BeginTrigger(Parse*, Token*,Token*,int,int,IdList*,SrcList*,
+                           Expr*,int, int);
+  void sqlite3FinishTrigger(Parse*, TriggerStep*, Token*);
+  void sqlite3DropTrigger(Parse*, SrcList*, int);
+  void sqlite3DropTriggerPtr(Parse*, Trigger*);
+  Trigger *sqlite3TriggersExist(Parse *, Table*, int, ExprList*, int *pMask);
+  Trigger *sqlite3TriggerList(Parse *, Table *);
+  void sqlite3CodeRowTrigger(Parse*, Trigger *, int, ExprList*, int, Table *,
+                            int, int, int);
+  void sqlite3CodeRowTriggerDirect(Parse *, Trigger *, Table *, int, int, int);
+  void sqliteViewTriggers(Parse*, Table*, Expr*, int, ExprList*);
+  void sqlite3DeleteTriggerStep(sqlite3*, TriggerStep*);
+  TriggerStep *sqlite3TriggerSelectStep(sqlite3*,Select*);
+  TriggerStep *sqlite3TriggerInsertStep(sqlite3*,Token*, IdList*,
+                                        ExprList*,Select*,u8);
+  TriggerStep *sqlite3TriggerUpdateStep(sqlite3*,Token*,ExprList*, Expr*, u8);
+  TriggerStep *sqlite3TriggerDeleteStep(sqlite3*,Token*, Expr*);
+  void sqlite3DeleteTrigger(sqlite3*, Trigger*);
+  void sqlite3UnlinkAndDeleteTrigger(sqlite3*,int,const char*);
+  u32 sqlite3TriggerColmask(Parse*,Trigger*,ExprList*,int,int,Table*,int);
+# define sqlite3ParseToplevel(p) ((p)->pToplevel ? (p)->pToplevel : (p))
+#else
+# define sqlite3TriggersExist(B,C,D,E,F) 0
+# define sqlite3DeleteTrigger(A,B)
+# define sqlite3DropTriggerPtr(A,B)
+# define sqlite3UnlinkAndDeleteTrigger(A,B,C)
+# define sqlite3CodeRowTrigger(A,B,C,D,E,F,G,H,I)
+# define sqlite3CodeRowTriggerDirect(A,B,C,D,E,F)
+# define sqlite3TriggerList(X, Y) 0
+# define sqlite3ParseToplevel(p) p
+# define sqlite3TriggerColmask(A,B,C,D,E,F,G) 0
+#endif
+
+int sqlite3JoinType(Parse*, Token*, Token*, Token*);
+void sqlite3CreateForeignKey(Parse*, ExprList*, Token*, ExprList*, int);
+void sqlite3DeferForeignKey(Parse*, int);
+#ifndef SQLITE_OMIT_AUTHORIZATION
+  void sqlite3AuthRead(Parse*,Expr*,Schema*,SrcList*);
+  int sqlite3AuthCheck(Parse*,int, const char*, const char*, const char*);
+  void sqlite3AuthContextPush(Parse*, AuthContext*, const char*);
+  void sqlite3AuthContextPop(AuthContext*);
+  int sqlite3AuthReadCol(Parse*, const char *, const char *, int);
+#else
+# define sqlite3AuthRead(a,b,c,d)
+# define sqlite3AuthCheck(a,b,c,d,e)    SQLITE_OK
+# define sqlite3AuthContextPush(a,b,c)
+# define sqlite3AuthContextPop(a)  ((void)(a))
+#endif
+void sqlite3Attach(Parse*, Expr*, Expr*, Expr*);
+void sqlite3Detach(Parse*, Expr*);
+int sqlite3FixInit(DbFixer*, Parse*, int, const char*, const Token*);
+int sqlite3FixSrcList(DbFixer*, SrcList*);
+int sqlite3FixSelect(DbFixer*, Select*);
+int sqlite3FixExpr(DbFixer*, Expr*);
+int sqlite3FixExprList(DbFixer*, ExprList*);
+int sqlite3FixTriggerStep(DbFixer*, TriggerStep*);
+int sqlite3AtoF(const char *z, double*, int, u8);
+int sqlite3GetInt32(const char *, int*);
+int sqlite3Atoi(const char*);
+int sqlite3Utf16ByteLen(const void *pData, int nChar);
+int sqlite3Utf8CharLen(const char *pData, int nByte);
+int sqlite3Utf8Read(const u8*, const u8**);
+
+/*
+** Routines to read and write variable-length integers.  These used to
+** be defined locally, but now we use the varint routines in the util.c
+** file.  Code should use the MACRO forms below, as the Varint32 versions
+** are coded to assume the single byte case is already handled (which 
+** the MACRO form does).
+*/
+int sqlite3PutVarint(unsigned char*, u64);
+int sqlite3PutVarint32(unsigned char*, u32);
+u8 sqlite3GetVarint(const unsigned char *, u64 *);
+u8 sqlite3GetVarint32(const unsigned char *, u32 *);
+int sqlite3VarintLen(u64 v);
+
+/*
+** The header of a record consists of a sequence variable-length integers.
+** These integers are almost always small and are encoded as a single byte.
+** The following macros take advantage this fact to provide a fast encode
+** and decode of the integers in a record header.  It is faster for the common
+** case where the integer is a single byte.  It is a little slower when the
+** integer is two or more bytes.  But overall it is faster.
+**
+** The following expressions are equivalent:
+**
+**     x = sqlite3GetVarint32( A, &B );
+**     x = sqlite3PutVarint32( A, B );
+**
+**     x = getVarint32( A, B );
+**     x = putVarint32( A, B );
+**
+*/
+#define getVarint32(A,B)  (u8)((*(A)<(u8)0x80) ? ((B) = (u32)*(A)),1 : sqlite3GetVarint32((A), (u32 *)&(B)))
+#define putVarint32(A,B)  (u8)(((u32)(B)<(u32)0x80) ? (*(A) = (unsigned char)(B)),1 : sqlite3PutVarint32((A), (B)))
+#define getVarint    sqlite3GetVarint
+#define putVarint    sqlite3PutVarint
+
+
+const char *sqlite3IndexAffinityStr(Vdbe *, Index *);
+void sqlite3TableAffinityStr(Vdbe *, Table *);
+char sqlite3CompareAffinity(Expr *pExpr, char aff2);
+int sqlite3IndexAffinityOk(Expr *pExpr, char idx_affinity);
+char sqlite3ExprAffinity(Expr *pExpr);
+int sqlite3Atoi64(const char*, i64*, int, u8);
+void sqlite3Error(sqlite3*, int, const char*,...);
+void *sqlite3HexToBlob(sqlite3*, const char *z, int n);
+int sqlite3TwoPartName(Parse *, Token *, Token *, Token **);
+const char *sqlite3ErrStr(int);
+int sqlite3ReadSchema(Parse *pParse);
+CollSeq *sqlite3FindCollSeq(sqlite3*,u8 enc, const char*,int);
+CollSeq *sqlite3LocateCollSeq(Parse *pParse, const char*zName);
+CollSeq *sqlite3ExprCollSeq(Parse *pParse, Expr *pExpr);
+Expr *sqlite3ExprSetColl(Expr*, CollSeq*);
+Expr *sqlite3ExprSetCollByToken(Parse *pParse, Expr*, Token*);
+int sqlite3CheckCollSeq(Parse *, CollSeq *);
+int sqlite3CheckObjectName(Parse *, const char *);
+void sqlite3VdbeSetChanges(sqlite3 *, int);
+int sqlite3AddInt64(i64*,i64);
+int sqlite3SubInt64(i64*,i64);
+int sqlite3MulInt64(i64*,i64);
+int sqlite3AbsInt32(int);
+
+const void *sqlite3ValueText(sqlite3_value*, u8);
+int sqlite3ValueBytes(sqlite3_value*, u8);
+void sqlite3ValueSetStr(sqlite3_value*, int, const void *,u8, 
+                        void(*)(void*));
+void sqlite3ValueFree(sqlite3_value*);
+sqlite3_value *sqlite3ValueNew(sqlite3 *);
+char *sqlite3Utf16to8(sqlite3 *, const void*, int, u8);
+#ifdef SQLITE_ENABLE_STAT2
+char *sqlite3Utf8to16(sqlite3 *, u8, char *, int, int *);
+#endif
+int sqlite3ValueFromExpr(sqlite3 *, Expr *, u8, u8, sqlite3_value **);
+void sqlite3ValueApplyAffinity(sqlite3_value *, u8, u8);
+#ifndef SQLITE_AMALGAMATION
+extern const unsigned char sqlite3OpcodeProperty[];
+extern const unsigned char sqlite3UpperToLower[];
+extern const unsigned char sqlite3CtypeMap[];
+extern const Token sqlite3IntTokens[];
+extern SQLITE_WSD struct Sqlite3Config sqlite3Config;
+extern SQLITE_WSD FuncDefHash sqlite3GlobalFunctions;
+#ifndef SQLITE_OMIT_WSD
+extern int sqlite3PendingByte;
+#endif
+#endif
+void sqlite3RootPageMoved(sqlite3*, int, int, int);
+void sqlite3Reindex(Parse*, Token*, Token*);
+void sqlite3AlterFunctions(void);
+void sqlite3AlterRenameTable(Parse*, SrcList*, Token*);
+int sqlite3GetToken(const unsigned char *, int *);
+void sqlite3NestedParse(Parse*, const char*, ...);
+void sqlite3ExpirePreparedStatements(sqlite3*);
+int sqlite3CodeSubselect(Parse *, Expr *, int, int);
+void sqlite3SelectPrep(Parse*, Select*, NameContext*);
+int sqlite3ResolveExprNames(NameContext*, Expr*);
+void sqlite3ResolveSelectNames(Parse*, Select*, NameContext*);
+int sqlite3ResolveOrderGroupBy(Parse*, Select*, ExprList*, const char*);
+void sqlite3ColumnDefault(Vdbe *, Table *, int, int);
+void sqlite3AlterFinishAddColumn(Parse *, Token *);
+void sqlite3AlterBeginAddColumn(Parse *, SrcList *);
+CollSeq *sqlite3GetCollSeq(sqlite3*, u8, CollSeq *, const char*);
+char sqlite3AffinityType(const char*);
+void sqlite3Analyze(Parse*, Token*, Token*);
+int sqlite3InvokeBusyHandler(BusyHandler*);
+int sqlite3FindDb(sqlite3*, Token*);
+int sqlite3FindDbName(sqlite3 *, const char *);
+int sqlite3AnalysisLoad(sqlite3*,int iDB);
+void sqlite3DeleteIndexSamples(sqlite3*,Index*);
+void sqlite3DefaultRowEst(Index*);
+void sqlite3RegisterLikeFunctions(sqlite3*, int);
+int sqlite3IsLikeFunction(sqlite3*,Expr*,int*,char*);
+void sqlite3MinimumFileFormat(Parse*, int, int);
+void sqlite3SchemaClear(void *);
+Schema *sqlite3SchemaGet(sqlite3 *, Btree *);
+int sqlite3SchemaToIndex(sqlite3 *db, Schema *);
+KeyInfo *sqlite3IndexKeyinfo(Parse *, Index *);
+int sqlite3CreateFunc(sqlite3 *, const char *, int, int, void *, 
+  void (*)(sqlite3_context*,int,sqlite3_value **),
+  void (*)(sqlite3_context*,int,sqlite3_value **), void (*)(sqlite3_context*),
+  FuncDestructor *pDestructor
+);
+int sqlite3ApiExit(sqlite3 *db, int);
+int sqlite3OpenTempDatabase(Parse *);
+
+void sqlite3StrAccumInit(StrAccum*, char*, int, int);
+void sqlite3StrAccumAppend(StrAccum*,const char*,int);
+char *sqlite3StrAccumFinish(StrAccum*);
+void sqlite3StrAccumReset(StrAccum*);
+void sqlite3SelectDestInit(SelectDest*,int,int);
+Expr *sqlite3CreateColumnExpr(sqlite3 *, SrcList *, int, int);
+
+void sqlite3BackupRestart(sqlite3_backup *);
+void sqlite3BackupUpdate(sqlite3_backup *, Pgno, const u8 *);
+
+/*
+** The interface to the LEMON-generated parser
+*/
+void *sqlite3ParserAlloc(void*(*)(size_t));
+void sqlite3ParserFree(void*, void(*)(void*));
+void sqlite3Parser(void*, int, Token, Parse*);
+#ifdef YYTRACKMAXSTACKDEPTH
+  int sqlite3ParserStackPeak(void*);
+#endif
+
+void sqlite3AutoLoadExtensions(sqlite3*);
+#ifndef SQLITE_OMIT_LOAD_EXTENSION
+  void sqlite3CloseExtensions(sqlite3*);
+#else
+# define sqlite3CloseExtensions(X)
+#endif
+
+#ifndef SQLITE_OMIT_SHARED_CACHE
+  void sqlite3TableLock(Parse *, int, int, u8, const char *);
+#else
+  #define sqlite3TableLock(v,w,x,y,z)
+#endif
+
+#ifdef SQLITE_TEST
+  int sqlite3Utf8To8(unsigned char*);
+#endif
+
+#ifdef SQLITE_OMIT_VIRTUALTABLE
+#  define sqlite3VtabClear(Y)
+#  define sqlite3VtabSync(X,Y) SQLITE_OK
+#  define sqlite3VtabRollback(X)
+#  define sqlite3VtabCommit(X)
+#  define sqlite3VtabInSync(db) 0
+#  define sqlite3VtabLock(X) 
+#  define sqlite3VtabUnlock(X)
+#  define sqlite3VtabUnlockList(X)
+#else
+   void sqlite3VtabClear(sqlite3 *db, Table*);
+   int sqlite3VtabSync(sqlite3 *db, char **);
+   int sqlite3VtabRollback(sqlite3 *db);
+   int sqlite3VtabCommit(sqlite3 *db);
+   void sqlite3VtabLock(VTable *);
+   void sqlite3VtabUnlock(VTable *);
+   void sqlite3VtabUnlockList(sqlite3*);
+#  define sqlite3VtabInSync(db) ((db)->nVTrans>0 && (db)->aVTrans==0)
+#endif
+void sqlite3VtabMakeWritable(Parse*,Table*);
+void sqlite3VtabBeginParse(Parse*, Token*, Token*, Token*);
+void sqlite3VtabFinishParse(Parse*, Token*);
+void sqlite3VtabArgInit(Parse*);
+void sqlite3VtabArgExtend(Parse*, Token*);
+int sqlite3VtabCallCreate(sqlite3*, int, const char *, char **);
+int sqlite3VtabCallConnect(Parse*, Table*);
+int sqlite3VtabCallDestroy(sqlite3*, int, const char *);
+int sqlite3VtabBegin(sqlite3 *, VTable *);
+FuncDef *sqlite3VtabOverloadFunction(sqlite3 *,FuncDef*, int nArg, Expr*);
+void sqlite3InvalidFunction(sqlite3_context*,int,sqlite3_value**);
+int sqlite3VdbeParameterIndex(Vdbe*, const char*, int);
+int sqlite3TransferBindings(sqlite3_stmt *, sqlite3_stmt *);
+int sqlite3Reprepare(Vdbe*);
+void sqlite3ExprListCheckLength(Parse*, ExprList*, const char*);
+CollSeq *sqlite3BinaryCompareCollSeq(Parse *, Expr *, Expr *);
+int sqlite3TempInMemory(const sqlite3*);
+VTable *sqlite3GetVTable(sqlite3*, Table*);
+const char *sqlite3JournalModename(int);
+int sqlite3Checkpoint(sqlite3*, int, int, int*, int*);
+int sqlite3WalDefaultHook(void*,sqlite3*,const char*,int);
+
+/* Declarations for functions in fkey.c. All of these are replaced by
+** no-op macros if OMIT_FOREIGN_KEY is defined. In this case no foreign
+** key functionality is available. If OMIT_TRIGGER is defined but
+** OMIT_FOREIGN_KEY is not, only some of the functions are no-oped. In
+** this case foreign keys are parsed, but no other functionality is 
+** provided (enforcement of FK constraints requires the triggers sub-system).
+*/
+#if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER)
+  void sqlite3FkCheck(Parse*, Table*, int, int);
+  void sqlite3FkDropTable(Parse*, SrcList *, Table*);
+  void sqlite3FkActions(Parse*, Table*, ExprList*, int);
+  int sqlite3FkRequired(Parse*, Table*, int*, int);
+  u32 sqlite3FkOldmask(Parse*, Table*);
+  FKey *sqlite3FkReferences(Table *);
+#else
+  #define sqlite3FkActions(a,b,c,d)
+  #define sqlite3FkCheck(a,b,c,d)
+  #define sqlite3FkDropTable(a,b,c)
+  #define sqlite3FkOldmask(a,b)      0
+  #define sqlite3FkRequired(a,b,c,d) 0
+#endif
+#ifndef SQLITE_OMIT_FOREIGN_KEY
+  void sqlite3FkDelete(sqlite3 *, Table*);
+#else
+  #define sqlite3FkDelete(a,b)
+#endif
+
+
+/*
+** Available fault injectors.  Should be numbered beginning with 0.
+*/
+#define SQLITE_FAULTINJECTOR_MALLOC     0
+#define SQLITE_FAULTINJECTOR_COUNT      1
+
+/*
+** The interface to the code in fault.c used for identifying "benign"
+** malloc failures. This is only present if SQLITE_OMIT_BUILTIN_TEST
+** is not defined.
+*/
+#ifndef SQLITE_OMIT_BUILTIN_TEST
+  void sqlite3BeginBenignMalloc(void);
+  void sqlite3EndBenignMalloc(void);
+#else
+  #define sqlite3BeginBenignMalloc()
+  #define sqlite3EndBenignMalloc()
+#endif
+
+#define IN_INDEX_ROWID           1
+#define IN_INDEX_EPH             2
+#define IN_INDEX_INDEX           3
+int sqlite3FindInIndex(Parse *, Expr *, int*);
+
+#ifdef SQLITE_ENABLE_ATOMIC_WRITE
+  int sqlite3JournalOpen(sqlite3_vfs *, const char *, sqlite3_file *, int, int);
+  int sqlite3JournalSize(sqlite3_vfs *);
+  int sqlite3JournalCreate(sqlite3_file *);
+#else
+  #define sqlite3JournalSize(pVfs) ((pVfs)->szOsFile)
+#endif
+
+void sqlite3MemJournalOpen(sqlite3_file *);
+int sqlite3MemJournalSize(void);
+int sqlite3IsMemJournal(sqlite3_file *);
+
+#if SQLITE_MAX_EXPR_DEPTH>0
+  void sqlite3ExprSetHeight(Parse *pParse, Expr *p);
+  int sqlite3SelectExprHeight(Select *);
+  int sqlite3ExprCheckHeight(Parse*, int);
+#else
+  #define sqlite3ExprSetHeight(x,y)
+  #define sqlite3SelectExprHeight(x) 0
+  #define sqlite3ExprCheckHeight(x,y)
+#endif
+
+u32 sqlite3Get4byte(const u8*);
+void sqlite3Put4byte(u8*, u32);
+
+#ifdef SQLITE_ENABLE_UNLOCK_NOTIFY
+  void sqlite3ConnectionBlocked(sqlite3 *, sqlite3 *);
+  void sqlite3ConnectionUnlocked(sqlite3 *db);
+  void sqlite3ConnectionClosed(sqlite3 *db);
+#else
+  #define sqlite3ConnectionBlocked(x,y)
+  #define sqlite3ConnectionUnlocked(x)
+  #define sqlite3ConnectionClosed(x)
+#endif
+
+#ifdef SQLITE_DEBUG
+  void sqlite3ParserTrace(FILE*, char *);
+#endif
+
+/*
+** If the SQLITE_ENABLE IOTRACE exists then the global variable
+** sqlite3IoTrace is a pointer to a printf-like routine used to
+** print I/O tracing messages. 
+*/
+#ifdef SQLITE_ENABLE_IOTRACE
+# define IOTRACE(A)  if( sqlite3IoTrace ){ sqlite3IoTrace A; }
+  void sqlite3VdbeIOTraceSql(Vdbe*);
+SQLITE_EXTERN void (*sqlite3IoTrace)(const char*,...);
+#else
+# define IOTRACE(A)
+# define sqlite3VdbeIOTraceSql(X)
+#endif
+
+/*
+** These routines are available for the mem2.c debugging memory allocator
+** only.  They are used to verify that different "types" of memory
+** allocations are properly tracked by the system.
+**
+** sqlite3MemdebugSetType() sets the "type" of an allocation to one of
+** the MEMTYPE_* macros defined below.  The type must be a bitmask with
+** a single bit set.
+**
+** sqlite3MemdebugHasType() returns true if any of the bits in its second
+** argument match the type set by the previous sqlite3MemdebugSetType().
+** sqlite3MemdebugHasType() is intended for use inside assert() statements.
+**
+** sqlite3MemdebugNoType() returns true if none of the bits in its second
+** argument match the type set by the previous sqlite3MemdebugSetType().
+**
+** Perhaps the most important point is the difference between MEMTYPE_HEAP
+** and MEMTYPE_LOOKASIDE.  If an allocation is MEMTYPE_LOOKASIDE, that means
+** it might have been allocated by lookaside, except the allocation was
+** too large or lookaside was already full.  It is important to verify
+** that allocations that might have been satisfied by lookaside are not
+** passed back to non-lookaside free() routines.  Asserts such as the
+** example above are placed on the non-lookaside free() routines to verify
+** this constraint. 
+**
+** All of this is no-op for a production build.  It only comes into
+** play when the SQLITE_MEMDEBUG compile-time option is used.
+*/
+#ifdef SQLITE_MEMDEBUG
+  void sqlite3MemdebugSetType(void*,u8);
+  int sqlite3MemdebugHasType(void*,u8);
+  int sqlite3MemdebugNoType(void*,u8);
+#else
+# define sqlite3MemdebugSetType(X,Y)  /* no-op */
+# define sqlite3MemdebugHasType(X,Y)  1
+# define sqlite3MemdebugNoType(X,Y)   1
+#endif
+#define MEMTYPE_HEAP       0x01  /* General heap allocations */
+#define MEMTYPE_LOOKASIDE  0x02  /* Might have been lookaside memory */
+#define MEMTYPE_SCRATCH    0x04  /* Scratch allocations */
+#define MEMTYPE_PCACHE     0x08  /* Page cache allocations */
+#define MEMTYPE_DB         0x10  /* Uses sqlite3DbMalloc, not sqlite_malloc */
+
+#endif /* _SQLITEINT_H_ */