Remove old Xservers.

x11-base/xorg-server/xorg-server-1.8.0.ebuild

-# Copyright 1999-2010 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="2"
-
-# Must be before x-modular eclass is inherited
-SNAPSHOT="yes"
-
-inherit x-modular multilib versionator
-
-EGIT_REPO_URI="git://anongit.freedesktop.org/git/xorg/xserver"
-
-OPENGL_DIR="xorg-x11"
-
-DESCRIPTION="X.Org X servers"
-KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~mips ~ppc ~ppc64 ~sh ~sparc ~x86 ~x86-fbsd"
-
-IUSE_SERVERS="dmx kdrive xorg"
-IUSE="${IUSE_SERVERS} tslib hal ipv6 minimal nptl sdl"
-RDEPEND="hal? ( sys-apps/hal )
-        tslib? ( >=x11-libs/tslib-1.0 x11-proto/xcalibrateproto )
-        dev-libs/openssl
-        >=x11-libs/libXfont-1.3.3
-        >=x11-libs/xtrans-1.2.2
-        >=x11-libs/libXau-1.0.4
-        >=x11-libs/libxkbfile-1.0.4
-        >=x11-libs/libXdmcp-1.0.2
-        >=x11-libs/libpciaccess-0.10.3
-        >=x11-libs/pixman-0.15.20
-        >=media-fonts/font-util-1.1
-        media-libs/freetype
-        >=x11-misc/xbitmaps-1.0.1
-        >=x11-misc/xkeyboard-config-1.4
-        x11-apps/xkbcomp
-        >=x11-apps/iceauth-1.0.2
-        >=x11-apps/rgb-1.0.3
-        >=x11-apps/xauth-1.0.3
-        >=x11-apps/xinit-1.0.8-r3
-        >=app-admin/eselect-opengl-1.0.8
-        dmx? (
-                x11-libs/libXt
-                >=x11-libs/libdmx-1.0.99.1
-                >=x11-libs/libX11-1.1.5
-                >=x11-libs/libXaw-1.0.4
-                >=x11-libs/libXext-1.0.5
-                >=x11-libs/libXfixes-4.0.3
-                >=x11-libs/libXi-1.2.99.1
-                >=x11-libs/libXmu-1.0.3
-                >=x11-libs/libXtst-1.0.3
-        )
-        !minimal? (
-                >=x11-libs/libX11-1.1.5
-                >=x11-libs/libXext-1.0.5
-                >=x11-libs/libXres-1.0.3
-                >=media-libs/mesa-7.8.1[nptl=]
-        )
-        >=x11-libs/libxkbui-1.0.2
-        kdrive? (
-                >=x11-libs/libXext-1.0.5
-                sdl? ( media-libs/libsdl ) )"
-        # Xres is dmx-dependent
-        # Xaw is dmx-dependent
-        # Xpm is dmx-dependent, pulls in Xt
-        # xkbcomp is launched at startup but not checked by ./configure
-
-## Deps that don't have a version in configure.ac but do here:
-# x11-proto/resourceproto
-# x11-proto/fontsproto
-# x11-libs/libXau
-# x11-libs/libXfont
-# x11-libs/libXdmcp
-# x11-libs/libXext
-# x11-libs/libX11
-# x11-libs/libXrender
-# x11-libs/libXmu
-# x11-libs/libXfixes
-# x11-libs/libXtst
-# x11-proto/xineramaproto
-# x11-proto/dmxproto
-## Deps that are larger here than in configure.ac
-# x11-libs/libpciaccess-0.8.0
-#
-
-DEPEND="${RDEPEND}
-        !!net-dialup/dtrace
-        sys-devel/flex
-        >=x11-proto/randrproto-1.2.99.3
-        >=x11-proto/renderproto-0.11
-        >=x11-proto/fixesproto-4.1
-        >=x11-proto/damageproto-1.1
-        >=x11-proto/xextproto-7.0.99.3
-        >=x11-proto/xproto-7.0.13
-        >=x11-proto/xf86dgaproto-2.0.99.1
-        >=x11-proto/xf86rushproto-1.1.2
-        >=x11-proto/xf86vidmodeproto-2.2.99.1
-        >=x11-proto/compositeproto-0.4
-        >=x11-proto/recordproto-1.13.99.1
-        >=x11-proto/resourceproto-1.0.2
-        >=x11-proto/videoproto-2.2.2
-        >=x11-proto/scrnsaverproto-1.1
-        >=x11-proto/trapproto-3.4.3
-        >=x11-proto/xineramaproto-1.1.3
-        >=x11-proto/fontsproto-2.0.2
-        >=x11-proto/kbproto-1.0.3
-        >=x11-proto/inputproto-1.9.99.902
-        >=x11-proto/bigreqsproto-1.1.0
-        >=x11-proto/xcmiscproto-1.2.0
-        >=x11-proto/glproto-1.4.10
-        dmx? ( >=x11-proto/dmxproto-2.2.99.1 )
-        !minimal? (
-                >=x11-proto/xf86driproto-2.1.0
-                >=x11-proto/dri2proto-2.2
-                >=x11-libs/libdrm-2.3.0
-        )"
-
-PDEPEND="xorg? ( >=x11-base/xorg-drivers-$(get_version_component_range 1-2) )"
-
-EPATCH_FORCE="yes"
-EPATCH_SUFFIX="patch"
-
-# These have been sent upstream
-UPSTREAMED_PATCHES=(
-        )
-
-PATCHES=(
-        "${UPSTREAMED_PATCHES[@]}"
-        "${FILESDIR}/${PV}-no-hardcoded-etc.patch"
-        "${FILESDIR}/${PV}-match-only-sane-devices.patch"
-        "${FILESDIR}/meego-xserver-bg-none-root.patch"
-        "${FILESDIR}/05moblin-xorg-x11-nonroot-vesa.patch"
-        "${FILESDIR}/meego-xorg-detect-psb.patch"
-        "${FILESDIR}/07moblin-use-sloppy-heuristic-first-for-initial-mode.patch"
-        "${FILESDIR}/meego-cache-xkbcomp-output-for-fast-start-up.patch"
-        # Fix for bug http://bugs.freedesktop.org/show_bug.cgi?id=27023
-        "${FILESDIR}/1.7.6-fix-wrong-bracket-values.patch"
-        # Allow usage of monotonic clock while cross-compiling
-        "${FILESDIR}/monotonic-clock-fix.patch"
-        )
-
-pkg_setup() {
-        use minimal || ensure_a_server_is_building
-
-        # SDL only available in kdrive build
-        if use kdrive && use sdl; then
-                conf_opts="${conf_opts} --enable-xsdl"
-        else
-                conf_opts="${conf_opts} --disable-xsdl"
-        fi
-
-        # Need to make sure aclocal includes target includes
-        AT_M4DIR="${AT_M4DIR} -I ${ROOT}usr/share/aclocal"
-
-        # localstatedir is used for the log location; we need to override the default
-        # from ebuild.sh
-        # sysconfdir is used for the xorg.conf location; same applies
-        # --enable-install-setuid needed because sparcs default off
-        CONFIGURE_OPTIONS="
-                $(use_enable ipv6)
-                $(use_enable dmx)
-                $(use_enable kdrive)
-                $(use_enable tslib)
-                $(use_enable tslib xcalibrate)
-                $(use_enable !minimal xvfb)
-                $(use_enable !minimal xnest)
-                $(use_enable !minimal record)
-                $(use_enable !minimal xfree86-utils)
-                $(use_enable !minimal install-libxf86config)
-                $(use_enable !minimal dri)
-                $(use_enable !minimal dri2)
-                $(use_enable !minimal glx)
-                $(use_enable xorg)
-                $(use_enable nptl glx-tls)
-                $(use_enable hal config-hal)
-                --sysconfdir=/etc/X11
-                --localstatedir=/var
-                --enable-install-setuid
-                --enable-null-root-cursor
-                --with-fontdir=/usr/share/fonts
-                --with-xkb-output=/var/lib/xkb
-                --without-dtrace
-                --with-sha1=libcrypto
-                ${conf_opts}"
-
-        # (#121394) Causes window corruption
-        filter-flags -fweb
-
-        # Incompatible with GCC 3.x SSP on x86, bug #244352
-        if use x86 ; then
-                if [[ $(gcc-major-version) -lt 4 ]]; then
-                        filter-flags -fstack-protector
-                fi
-        fi
-
-        OLD_IMPLEM="$(eselect opengl show)"
-        eselect opengl set ${OPENGL_DIR}
-}
-
-src_install() {
-        x-modular_src_install
-
-        dynamic_libgl_install
-
-        server_based_install
-
-        if ! use minimal &&     use xorg; then
-                # Install xorg.conf.example (see bugs #151421 and #151670)
-                insinto /etc/X11
-                doins hw/xfree86/xorg.conf.example \
-                        || die "couldn't install xorg.conf.example"
-        fi
-}
-
-pkg_postinst() {
-        switch_opengl_implem
-
-        echo
-        ewarn "You must rebuild all drivers if upgrading from xorg-server 1.6"
-        ewarn "or earlier, because the ABI changed. If you cannot start X because"
-        ewarn "of module version mismatch errors, this is your problem."
-
-        echo
-        ewarn "You can generate a list of all installed packages in the x11-drivers"
-        ewarn "category using this command:"
-        ewarn "emerge portage-utils; qlist -I -C x11-drivers/"
-
-        ebeep 5
-        epause 10
-}
-
-pkg_postrm() {
-        # Get rid of module dir to ensure opengl-update works properly
-        if ! has_version x11-base/xorg-server; then
-                if [[ -e ${ROOT}/usr/$(get_libdir)/xorg/modules ]]; then
-                        rm -rf "${ROOT}"/usr/$(get_libdir)/xorg/modules
-                fi
-        fi
-}
-
-dynamic_libgl_install() {
-        # next section is to setup the dynamic libGL stuff
-        ebegin "Moving GL files for dynamic switching"
-                dodir /usr/$(get_libdir)/opengl/${OPENGL_DIR}/extensions
-                local x=""
-                for x in "${D}"/usr/$(get_libdir)/xorg/modules/extensions/lib{glx,dri,dri2}*; do
-                        if [ -f ${x} -o -L ${x} ]; then
-                                mv -f ${x} "${D}"/usr/$(get_libdir)/opengl/${OPENGL_DIR}/extensions
-                        fi
-                done
-        eend 0
-}
-
-server_based_install() {
-        if ! use xorg; then
-                rm "${D}"/usr/share/man/man1/Xserver.1x \
-                        "${D}"/usr/$(get_libdir)/xserver/SecurityPolicy \
-                        "${D}"/usr/$(get_libdir)/pkgconfig/xorg-server.pc \
-                        "${D}"/usr/share/man/man1/Xserver.1x
-        fi
-}
-
-switch_opengl_implem() {
-                # Switch to the xorg implementation.
-                # Use new opengl-update that will not reset user selected
-                # OpenGL interface ...
-                echo
-                eselect opengl set ${OLD_IMPLEM}
-}
-
-ensure_a_server_is_building() {
-        for server in ${IUSE_SERVERS}; do
-                use ${server} && return;
-        done
-        eerror "You need to specify at least one server to build."
-        eerror "Valid servers are: ${IUSE_SERVERS}."
-        die "No servers were specified to build."
-}