Remove third_party/npapi/npspy.

third_party/npapi/npspy/extern/nspr/md/_nextstep.h

Index: third_party/npapi/npspy/extern/nspr/md/_nextstep.h
diff --git a/third_party/npapi/npspy/extern/nspr/md/_nextstep.h b/third_party/npapi/npspy/extern/nspr/md/_nextstep.h
deleted file mode 100644
index 484bd06dea73d7c8d497a76f2f56a8d20e79e9c5..0000000000000000000000000000000000000000
--- a/third_party/npapi/npspy/extern/nspr/md/_nextstep.h
+++ /dev/null
@@ -1,296 +0,0 @@
-/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
-/* 
- * The contents of this file are subject to the Mozilla Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/MPL/
- * 
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- * 
- * The Original Code is the Netscape Portable Runtime (NSPR).
- * 
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation.  Portions created by Netscape are 
- * Copyright (C) 1998-2000 Netscape Communications Corporation.  All
- * Rights Reserved.
- * 
- * Contributor(s):
- * 
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License Version 2 or later (the
- * "GPL"), in which case the provisions of the GPL are applicable 
- * instead of those above.  If you wish to allow use of your 
- * version of this file only under the terms of the GPL and not to
- * allow others to use your version of this file under the MPL,
- * indicate your decision by deleting the provisions above and
- * replace them with the notice and other provisions required by
- * the GPL.  If you do not delete the provisions above, a recipient
- * may use your version of this file under either the MPL or the
- * GPL.
- */
-
-#ifndef nspr_nextstep_defs_h___
-#define nspr_nextstep_defs_h___
-
-#include "prthread.h"
-
-#include <bsd/libc.h>
-#include <bsd/syscall.h>
-
-/*	syscall() is not declared in NEXTSTEP's syscall.h ...
-*/
-extern int syscall(int number, ...);
-
-/*
- * Internal configuration macros
- */
-
-#define PR_LINKER_ARCH	"nextstep"
-#define _PR_SI_SYSNAME  "NEXTSTEP"
-#if defined(__sparc__)
-#define _PR_SI_ARCHITECTURE "sparc"
-#elif defined(__m68k__)
-#define _PR_SI_ARCHITECTURE "m68k"
-#elif defined(__i386__)
-#define _PR_SI_ARCHITECTURE "x86"
-#else
-error Unknown NEXTSTEP architecture
-#endif
-#define PR_DLL_SUFFIX		".so"
-
-#define _PR_VMBASE              0x30000000
-#define _PR_STACK_VMBASE	0x50000000
-#define _MD_DEFAULT_STACK_SIZE	65536L
-#define _MD_MMAP_FLAGS          MAP_PRIVATE
-
-#undef  HAVE_STACK_GROWING_UP
-
-#define HAVE_WEAK_MALLOC_SYMBOLS
-
-#define HAVE_DLL
-#define USE_MACH_DYLD
-#define _PR_STAT_HAS_ONLY_ST_ATIME
-#define _PR_NO_LARGE_FILES
-
-#define USE_SETJMP
-
-#ifndef _PR_PTHREADS
-
-#include <setjmp.h>
-
-#define PR_CONTEXT_TYPE	jmp_buf
-
-#define CONTEXT(_th) ((_th)->md.context)
-
-/* balazs.pataki@sztaki.hu:
-** __sparc__ is checked
-** __m68k__ is checked
-** __i386__ is a guess (one of the two defines should work)
-*/
-#if defined(__sparc__)
-#define _MD_GET_SP(_th)		(_th)->md.context[2]
-#elif defined(__m68k__)
-#define _MD_GET_SP(_th)		(_th)->md.context[2]
-#elif defined(__i386__)
-/* One of this two must be OK ... try using sc_onstack
-*/
-#define _MD_GET_SP(_th)    (((struct sigcontext *) (_th)->md.context)->sc_onstack)
-//#define _MD_GET_SP(_th)		(_th)->md.context[0].sc_esp
-#else
-error Unknown NEXTSTEP architecture
-#endif
-
-#define PR_NUM_GCREGS	_JBLEN
-
-/*
-** Initialize a thread context to run "_main()" when started
-*/
-#define _MD_INIT_CONTEXT(_thread, _sp, _main, status)  \
-{  \
-    *status = PR_TRUE;  \
-    if (setjmp(CONTEXT(_thread))) {  \
-        _main();  \
-    }  \
-    _MD_GET_SP(_thread) = (int) ((_sp) - 64); \
-}
-
-#define _MD_SWITCH_CONTEXT(_thread)  \
-    if (!setjmp(CONTEXT(_thread))) {  \
-	(_thread)->md.errcode = errno;  \
-	_PR_Schedule();  \
-    }
-
-/*
-** Restore a thread context, saved by _MD_SWITCH_CONTEXT
-*/
-#define _MD_RESTORE_CONTEXT(_thread) \
-{   \
-    errno = (_thread)->md.errcode;  \
-    _MD_SET_CURRENT_THREAD(_thread);  \
-    longjmp(CONTEXT(_thread), 1);  \
-}
-
-/* Machine-dependent (MD) data structures */
-
-struct _MDThread {
-    PR_CONTEXT_TYPE context;
-    int id;
-    int errcode;
-};
-
-struct _MDThreadStack {
-    PRInt8 notused;
-};
-
-struct _MDLock {
-    PRInt8 notused;
-};
-
-struct _MDSemaphore {
-    PRInt8 notused;
-};
-
-struct _MDCVar {
-    PRInt8 notused;
-};
-
-struct _MDSegment {
-    PRInt8 notused;
-};
-
-/*
- * md-specific cpu structure field
- */
-#define _PR_MD_MAX_OSFD FD_SETSIZE
-
-struct _MDCPU_Unix {
-    PRCList ioQ;
-    PRUint32 ioq_timeout;
-    PRInt32 ioq_max_osfd;
-    PRInt32 ioq_osfd_cnt;
-#ifndef _PR_USE_POLL
-    fd_set fd_read_set, fd_write_set, fd_exception_set;
-    PRInt16 fd_read_cnt[_PR_MD_MAX_OSFD],fd_write_cnt[_PR_MD_MAX_OSFD],
-				fd_exception_cnt[_PR_MD_MAX_OSFD];
-#else
-	struct pollfd *ioq_pollfds;
-	int ioq_pollfds_size;
-#endif	/* _PR_USE_POLL */
-};
-
-#define _PR_IOQ(_cpu)			((_cpu)->md.md_unix.ioQ)
-#define _PR_ADD_TO_IOQ(_pq, _cpu) PR_APPEND_LINK(&_pq.links, &_PR_IOQ(_cpu))
-#define _PR_FD_READ_SET(_cpu)		((_cpu)->md.md_unix.fd_read_set)
-#define _PR_FD_READ_CNT(_cpu)		((_cpu)->md.md_unix.fd_read_cnt)
-#define _PR_FD_WRITE_SET(_cpu)		((_cpu)->md.md_unix.fd_write_set)
-#define _PR_FD_WRITE_CNT(_cpu)		((_cpu)->md.md_unix.fd_write_cnt)
-#define _PR_FD_EXCEPTION_SET(_cpu)	((_cpu)->md.md_unix.fd_exception_set)
-#define _PR_FD_EXCEPTION_CNT(_cpu)	((_cpu)->md.md_unix.fd_exception_cnt)
-#define _PR_IOQ_TIMEOUT(_cpu)		((_cpu)->md.md_unix.ioq_timeout)
-#define _PR_IOQ_MAX_OSFD(_cpu)		((_cpu)->md.md_unix.ioq_max_osfd)
-#define _PR_IOQ_OSFD_CNT(_cpu)		((_cpu)->md.md_unix.ioq_osfd_cnt)
-#define _PR_IOQ_POLLFDS(_cpu)		((_cpu)->md.md_unix.ioq_pollfds)
-#define _PR_IOQ_POLLFDS_SIZE(_cpu)	((_cpu)->md.md_unix.ioq_pollfds_size)
-
-#define _PR_IOQ_MIN_POLLFDS_SIZE(_cpu)	32
-
-struct _MDCPU {
-	struct _MDCPU_Unix md_unix;
-};
-
-#define _MD_INIT_LOCKS()
-#define _MD_NEW_LOCK(lock) PR_SUCCESS
-#define _MD_FREE_LOCK(lock)
-#define _MD_LOCK(lock)
-#define _MD_UNLOCK(lock)
-#define _MD_INIT_IO()
-#define _MD_IOQ_LOCK()
-#define _MD_IOQ_UNLOCK()
-
-extern PRStatus _MD_InitializeThread(PRThread *thread);
-
-#define _MD_INIT_RUNNING_CPU(cpu)       _MD_unix_init_running_cpu(cpu)
-#define _MD_INIT_THREAD                 _MD_InitializeThread
-#define _MD_EXIT_THREAD(thread)
-#define _MD_SUSPEND_THREAD(thread)      _MD_suspend_thread
-#define _MD_RESUME_THREAD(thread)       _MD_resume_thread
-#define _MD_CLEAN_THREAD(_thread)
-
-extern PRStatus _MD_CREATE_THREAD(
-    PRThread *thread,
-    void (*start) (void *),
-    PRThreadPriority priority,
-    PRThreadScope scope,
-    PRThreadState state,
-    PRUint32 stackSize);
-extern void _MD_SET_PRIORITY(struct _MDThread *thread, PRUintn newPri);
-extern PRStatus _MD_WAIT(PRThread *, PRIntervalTime timeout);
-extern PRStatus _MD_WAKEUP_WAITER(PRThread *);
-extern void _MD_YIELD(void);
-
-#endif /* ! _PR_PTHREADS */
-
-extern void _MD_EarlyInit(void);
-extern PRIntervalTime _PR_UNIX_GetInterval(void);
-extern PRIntervalTime _PR_UNIX_TicksPerSecond(void);
-
-#define _MD_EARLY_INIT                  _MD_EarlyInit
-#define _MD_FINAL_INIT			_PR_UnixInit
-#define _MD_GET_INTERVAL                  _PR_UNIX_GetInterval
-#define _MD_INTERVAL_PER_SEC              _PR_UNIX_TicksPerSecond
-
-/*
- * We wrapped the select() call.  _MD_SELECT refers to the built-in,
- * unwrapped version.
- */
-#define _MD_SELECT(nfds,r,w,e,tv) syscall(SYS_select,nfds,r,w,e,tv)
-
-/* For writev() */
-#include <sys/uio.h>
-
-/* signal.h */
-/* 	balazs.pataki@sztaki.hu: this is stolen from sunos4.h. The things is that
-** 	NEXTSTEP doesn't support these flags for `struct sigaction's sa_flags, so
-**	I have to fake them ...
-*/
-#define SA_RESTART 0
-
-/* mmap */
-/* 	balazs.pataki@sztaki.hu: NEXTSTEP doesn't have mmap, at least not 
-**	publically. We have sys/mman.h, but it doesn't declare mmap(), and
-**	PROT_NONE is also missing. syscall.h has entries for mmap, munmap, and 
-**	mprotect so I wrap these in nextstep.c as  mmap(), munmap() and mprotect()
-**	and pray for it to work.
-**	
-*/
-caddr_t mmap(caddr_t addr, size_t len, int prot, int flags,
-          int fildes, off_t off);
-int munmap(caddr_t addr, size_t len);
-int mprotect(caddr_t addr, size_t len, int prot);
-
-/*	my_mmap() is implemented in nextstep.c and is based on map_fd() of mach.
-*/
-caddr_t my_mmap(caddr_t addr, size_t len, int prot, int flags,
-          int fildes, off_t off);
-int my_munmap(caddr_t addr, size_t len);
-
-
-/*	string.h
-*/
-/* balazs.pataki@sztaki.hu: this is missing so implemenetd in nextstep.c ...
-*/
-char *strdup(const char *s1);
-
-/* unistd.h
-*/
-/* 	balazs.pataki@sztaki.hu: these functions are hidden, though correctly 
-**	implemented in NEXTSTEP. Here I give the declaration for them to be used
-**	by prmalloc.c, and I have a wrapped syscall() version of them in nextstep.c
-*/
-int brk(void *endds);
-void *sbrk(int incr);
-
-#endif /* nspr_nextstep_defs_h___ */