Remove third_party/npapi/npspy.

third_party/npapi/npspy/extern/nspr/obsolete/probslet.h

Index: third_party/npapi/npspy/extern/nspr/obsolete/probslet.h
diff --git a/third_party/npapi/npspy/extern/nspr/obsolete/probslet.h b/third_party/npapi/npspy/extern/nspr/obsolete/probslet.h
deleted file mode 100644
index aafa0bb73cf9e8af0068e09c3d444f24f3e34081..0000000000000000000000000000000000000000
--- a/third_party/npapi/npspy/extern/nspr/obsolete/probslet.h
+++ /dev/null
@@ -1,172 +0,0 @@
-/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
-/* 
- * The contents of this file are subject to the Mozilla Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/MPL/
- * 
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- * 
- * The Original Code is the Netscape Portable Runtime (NSPR).
- * 
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation.  Portions created by Netscape are 
- * Copyright (C) 1998-2000 Netscape Communications Corporation.  All
- * Rights Reserved.
- * 
- * Contributor(s):
- * 
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License Version 2 or later (the
- * "GPL"), in which case the provisions of the GPL are applicable 
- * instead of those above.  If you wish to allow use of your 
- * version of this file only under the terms of the GPL and not to
- * allow others to use your version of this file under the MPL,
- * indicate your decision by deleting the provisions above and
- * replace them with the notice and other provisions required by
- * the GPL.  If you do not delete the provisions above, a recipient
- * may use your version of this file under either the MPL or the
- * GPL.
- */
-
-/*
-** A collection of things thought to be obsolete
-*/
-
-#if defined(PROBSLET_H)
-#else
-#define PROBSLET_H
-
-#include "prio.h"
-
-PR_BEGIN_EXTERN_C
-
-/*
-** Yield the current thread.  The proper function to use in place of
-** PR_Yield() is PR_Sleep() with an argument of PR_INTERVAL_NO_WAIT.
-*/
-NSPR_API(PRStatus) PR_Yield(void);
-
-/************************************************************************/
-/************* The following definitions are for select *****************/
-/************************************************************************/
-
-/*
-** The following is obsolete and will be deleted in the next release!
-** These are provided for compatibility, but are GUARANTEED to be slow.
-**
-** Override PR_MAX_SELECT_DESC if you need more space in the select set.
-*/
-#ifndef PR_MAX_SELECT_DESC
-#define PR_MAX_SELECT_DESC 1024
-#endif
-typedef struct PR_fd_set {
-    PRUint32      hsize;
-    PRFileDesc   *harray[PR_MAX_SELECT_DESC];
-    PRUint32      nsize;
-    PRInt32       narray[PR_MAX_SELECT_DESC];
-} PR_fd_set;
-
-/*
-*************************************************************************
-** FUNCTION:    PR_Select
-** DESCRIPTION:
-**
-** The call returns as soon as I/O is ready on one or more of the underlying
-** file/socket descriptors or an exceptional condition is pending. A count of the 
-** number of ready descriptors is returned unless a timeout occurs in which case 
-** zero is returned.  On return, PR_Select replaces the given descriptor sets with 
-** subsets consisting of those descriptors that are ready for the requested condition.
-** The total number of ready descriptors in all the sets is the return value.
-**
-** INPUTS:
-**   PRInt32 num             
-**       This argument is unused but is provided for select(unix) interface
-**       compatability.  All input PR_fd_set arguments are self-describing
-**       with its own maximum number of elements in the set.
-**                               
-**   PR_fd_set *readfds
-**       A set describing the io descriptors for which ready for reading
-**       condition is of interest.  
-**                               
-**   PR_fd_set *writefds
-**       A set describing the io descriptors for which ready for writing
-**       condition is of interest.  
-**                               
-**   PR_fd_set *exceptfds
-**       A set describing the io descriptors for which exception pending
-**       condition is of interest.  
-**
-**   Any of the above readfds, writefds or exceptfds may be given as NULL 
-**   pointers if no descriptors are of interest for that particular condition.                          
-**   
-**   PRIntervalTime timeout  
-**       Amount of time the call will block waiting for I/O to become ready. 
-**       If this time expires without any I/O becoming ready, the result will
-**       be zero.
-**
-** OUTPUTS:    
-**   PR_fd_set *readfds
-**       A set describing the io descriptors which are ready for reading.
-**                               
-**   PR_fd_set *writefds
-**       A set describing the io descriptors which are ready for writing.
-**                               
-**   PR_fd_set *exceptfds
-**       A set describing the io descriptors which have pending exception.
-**
-** RETURN:PRInt32
-**   Number of io descriptors with asked for conditions or zero if the function
-**   timed out or -1 on failure.  The reason for the failure is obtained by 
-**   calling PR_GetError().
-** XXX can we implement this on windoze and mac?
-**************************************************************************
-*/
-NSPR_API(PRInt32) PR_Select(
-    PRInt32 num, PR_fd_set *readfds, PR_fd_set *writefds,
-    PR_fd_set *exceptfds, PRIntervalTime timeout);
-
-/* 
-** The following are not thread safe for two threads operating on them at the
-** same time.
-**
-** The following routines are provided for manipulating io descriptor sets.
-** PR_FD_ZERO(&fdset) initializes a descriptor set fdset to the null set.
-** PR_FD_SET(fd, &fdset) includes a particular file descriptor fd in fdset.
-** PR_FD_CLR(fd, &fdset) removes a file descriptor fd from fdset.  
-** PR_FD_ISSET(fd, &fdset) is nonzero if file descriptor fd is a member of 
-** fdset, zero otherwise.
-**
-** PR_FD_NSET(osfd, &fdset) includes a particular native file descriptor osfd
-** in fdset.
-** PR_FD_NCLR(osfd, &fdset) removes a native file descriptor osfd from fdset.  
-** PR_FD_NISSET(osfd, &fdset) is nonzero if native file descriptor osfd is a member of 
-** fdset, zero otherwise.
-*/
-
-NSPR_API(void)        PR_FD_ZERO(PR_fd_set *set);
-NSPR_API(void)        PR_FD_SET(PRFileDesc *fd, PR_fd_set *set);
-NSPR_API(void)        PR_FD_CLR(PRFileDesc *fd, PR_fd_set *set);
-NSPR_API(PRInt32)     PR_FD_ISSET(PRFileDesc *fd, PR_fd_set *set);
-NSPR_API(void)        PR_FD_NSET(PRInt32 osfd, PR_fd_set *set);
-NSPR_API(void)        PR_FD_NCLR(PRInt32 osfd, PR_fd_set *set);
-NSPR_API(PRInt32)     PR_FD_NISSET(PRInt32 osfd, PR_fd_set *set);
-
-#ifndef NO_NSPR_10_SUPPORT
-#ifdef XP_MAC
-#include <stat.h>
-#else
-#include <sys/stat.h>
-#endif
-
-NSPR_API(PRInt32) PR_Stat(const char *path, struct stat *buf);
-#endif /* NO_NSPR_10_SUPPORT */
-
-PR_END_EXTERN_C
-
-#endif /* defined(PROBSLET_H) */
-
-/* probslet.h */