Remove third_party/npapi/npspy.

third_party/npapi/npspy/extern/nspr/private/pprio.h

Index: third_party/npapi/npspy/extern/nspr/private/pprio.h
diff --git a/third_party/npapi/npspy/extern/nspr/private/pprio.h b/third_party/npapi/npspy/extern/nspr/private/pprio.h
deleted file mode 100644
index 65524ae3a4df353dda5815935fe9ea184db8b623..0000000000000000000000000000000000000000
--- a/third_party/npapi/npspy/extern/nspr/private/pprio.h
+++ /dev/null
@@ -1,262 +0,0 @@
-/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
-/* 
- * The contents of this file are subject to the Mozilla Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/MPL/
- * 
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- * 
- * The Original Code is the Netscape Portable Runtime (NSPR).
- * 
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation.  Portions created by Netscape are 
- * Copyright (C) 1998-2000 Netscape Communications Corporation.  All
- * Rights Reserved.
- * 
- * Contributor(s):
- * 
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License Version 2 or later (the
- * "GPL"), in which case the provisions of the GPL are applicable 
- * instead of those above.  If you wish to allow use of your 
- * version of this file only under the terms of the GPL and not to
- * allow others to use your version of this file under the MPL,
- * indicate your decision by deleting the provisions above and
- * replace them with the notice and other provisions required by
- * the GPL.  If you do not delete the provisions above, a recipient
- * may use your version of this file under either the MPL or the
- * GPL.
- */
-
-/*
-** File:	pprio.h
-**
-** Description:	Private definitions for I/O related structures
-*/
-
-#ifndef pprio_h___
-#define pprio_h___
-
-#include "prtypes.h"
-#include "prio.h"
-
-PR_BEGIN_EXTERN_C
-
-/************************************************************************/
-/************************************************************************/
-
-/* Return the method tables for files, tcp sockets and udp sockets */
-NSPR_API(const PRIOMethods*)    PR_GetFileMethods(void);
-NSPR_API(const PRIOMethods*)    PR_GetTCPMethods(void);
-NSPR_API(const PRIOMethods*)    PR_GetUDPMethods(void);
-NSPR_API(const PRIOMethods*)    PR_GetPipeMethods(void);
-
-/*
-** Convert a NSPR Socket Handle to a Native Socket handle.
-** This function will be obsoleted with the next release; avoid using it.
-*/
-NSPR_API(PRInt32)      PR_FileDesc2NativeHandle(PRFileDesc *);
-NSPR_API(void)         PR_ChangeFileDescNativeHandle(PRFileDesc *, PRInt32);
-NSPR_API(PRFileDesc*)  PR_AllocFileDesc(PRInt32 osfd,
-                                         const PRIOMethods *methods);
-NSPR_API(void)         PR_FreeFileDesc(PRFileDesc *fd);
-/*
-** Import an existing OS file to NSPR. 
-*/
-NSPR_API(PRFileDesc*)  PR_ImportFile(PRInt32 osfd);
-NSPR_API(PRFileDesc*)  PR_ImportPipe(PRInt32 osfd);
-NSPR_API(PRFileDesc*)  PR_ImportTCPSocket(PRInt32 osfd);
-NSPR_API(PRFileDesc*)  PR_ImportUDPSocket(PRInt32 osfd);
-
-
-/*
- *************************************************************************
- * FUNCTION: PR_CreateSocketPollFd
- * DESCRIPTION:
- *     Create a PRFileDesc wrapper for a native socket handle, for use with
- *	   PR_Poll only
- * INPUTS:
- *     None
- * OUTPUTS:
- *     None
- * RETURN: PRFileDesc*
- *     Upon successful completion, PR_CreateSocketPollFd returns a pointer
- *     to the PRFileDesc created for the native socket handle
- *     Returns a NULL pointer if the create of a new PRFileDesc failed
- *
- **************************************************************************
- */
-
-NSPR_API(PRFileDesc*)	PR_CreateSocketPollFd(PRInt32 osfd);
-
-/*
- *************************************************************************
- * FUNCTION: PR_DestroySocketPollFd
- * DESCRIPTION:
- *     Destroy the PRFileDesc wrapper created by PR_CreateSocketPollFd
- * INPUTS:
- *     None
- * OUTPUTS:
- *     None
- * RETURN: PRFileDesc*
- *     Upon successful completion, PR_DestroySocketPollFd returns
- *	   PR_SUCCESS, else PR_FAILURE
- *
- **************************************************************************
- */
-
-NSPR_API(PRStatus) PR_DestroySocketPollFd(PRFileDesc *fd);
-
-
-/*
-** Macros for PR_Socket
-**
-** Socket types: PR_SOCK_STREAM, PR_SOCK_DGRAM
-*/
-
-#ifdef WIN32
-
-#define PR_SOCK_STREAM 1
-#define PR_SOCK_DGRAM 2
-
-#else /* WIN32 */
-
-#define PR_SOCK_STREAM SOCK_STREAM
-#define PR_SOCK_DGRAM SOCK_DGRAM
-
-#endif /* WIN32 */
-
-/*
-** Create a new Socket; this function is obsolete.
-*/
-NSPR_API(PRFileDesc*)	PR_Socket(PRInt32 domain, PRInt32 type, PRInt32 proto);
-
-/* FUNCTION: PR_LockFile
-** DESCRIPTION:
-**    Lock a file for exclusive access.
-** RETURNS:
-**    PR_SUCCESS when the lock is held
-**    PR_FAILURE otherwise
-*/
-NSPR_API(PRStatus) PR_LockFile(PRFileDesc *fd);
-
-/* FUNCTION: PR_TLockFile
-** DESCRIPTION:
-**    Test and Lock a file for exclusive access.  Do not block if the
-**    file cannot be locked immediately.
-** RETURNS:
-**    PR_SUCCESS when the lock is held
-**    PR_FAILURE otherwise
-*/
-NSPR_API(PRStatus) PR_TLockFile(PRFileDesc *fd);
-
-/* FUNCTION: PR_UnlockFile
-** DESCRIPTION:
-**    Unlock a file which has been previously locked successfully by this
-**    process.
-** RETURNS:
-**    PR_SUCCESS when the lock is released
-**    PR_FAILURE otherwise
-*/
-NSPR_API(PRStatus) PR_UnlockFile(PRFileDesc *fd);
-
-/*
-** Emulate acceptread by accept and recv.
-*/
-NSPR_API(PRInt32) PR_EmulateAcceptRead(PRFileDesc *sd, PRFileDesc **nd,
-    PRNetAddr **raddr, void *buf, PRInt32 amount, PRIntervalTime timeout);
-
-/*
-** Emulate sendfile by reading from the file and writing to the socket.
-** The file is memory-mapped if memory-mapped files are supported.
-*/
-NSPR_API(PRInt32) PR_EmulateSendFile(
-    PRFileDesc *networkSocket, PRSendFileData *sendData,
-    PRTransmitFileFlags flags, PRIntervalTime timeout);
-
-#ifdef WIN32
-/* FUNCTION: PR_NTFast_AcceptRead
-** DESCRIPTION:
-**    NT has the notion of an "accept context", which is only needed in
-**    order to make certain calls.  By default, a socket connected via
-**    AcceptEx can only do a limited number of things without updating
-**    the acceptcontext.  The generic version of PR_AcceptRead always
-**    updates the accept context.  This version does not.
-**/
-NSPR_API(PRInt32) PR_NTFast_AcceptRead(PRFileDesc *sd, PRFileDesc **nd,
-              PRNetAddr **raddr, void *buf, PRInt32 amount, PRIntervalTime t);
-
-typedef void (*_PR_AcceptTimeoutCallback)(void *);
-
-/* FUNCTION: PR_NTFast_AcceptRead_WithTimeoutCallback
-** DESCRIPTION:
-**    The AcceptEx call combines the accept with the read function.  However,
-**    our daemon threads need to be able to wakeup and reliably flush their
-**    log buffers if the Accept times out.  However, with the current blocking
-**    interface to AcceptRead, there is no way for us to timeout the Accept;
-**    this is because when we timeout the Read, we can close the newly 
-**    socket and continue; but when we timeout the accept itself, there is no
-**    new socket to timeout.  So instead, this version of the function is
-**    provided.  After the initial timeout period elapses on the accept()
-**    portion of the function, it will call the callback routine and then
-**    continue the accept.   If the timeout occurs on the read, it will 
-**    close the connection and return error.
-*/
-NSPR_API(PRInt32) PR_NTFast_AcceptRead_WithTimeoutCallback(
-              PRFileDesc *sd, 
-              PRFileDesc **nd,
-              PRNetAddr **raddr, 
-              void *buf, 
-              PRInt32 amount, 
-              PRIntervalTime t,
-              _PR_AcceptTimeoutCallback callback, 
-              void *callback_arg);
-
-/* FUNCTION: PR_NTFast_Accept
-** DESCRIPTION:
-**    NT has the notion of an "accept context", which is only needed in
-**    order to make certain calls.  By default, a socket connected via
-**    AcceptEx can only do a limited number of things without updating
-**    the acceptcontext.  The generic version of PR_Accept always
-**    updates the accept context.  This version does not.
-**/
-NSPR_API(PRFileDesc*)	PR_NTFast_Accept(PRFileDesc *fd, PRNetAddr *addr,
-                                                PRIntervalTime timeout);
-
-/* FUNCTION: PR_NTFast_Update
-** DESCRIPTION:
-**    For sockets accepted with PR_NTFast_Accept or PR_NTFastAcceptRead,
-**    this function will update the accept context for those sockets,
-**    so that the socket can make general purpose socket calls.
-**    Without calling this, the only operations supported on the socket
-**    Are PR_Read, PR_Write, PR_Transmitfile, and PR_Close.
-*/
-NSPR_API(void) PR_NTFast_UpdateAcceptContext(PRFileDesc *acceptSock, 
-                                        PRFileDesc *listenSock);
-
-
-/* FUNCTION: PR_NT_CancelIo
-** DESCRIPTION:
-**    Cancel IO operations on fd.
-*/
-NSPR_API(PRStatus) PR_NT_CancelIo(PRFileDesc *fd);
-
-
-#endif /* WIN32 */
-
-/*
-** Need external access to this on Mac so we can first set up our faux
-** environment vars
-*/
-#ifdef XP_MAC
-NSPR_API(void) PR_Init_Log(void);
-#endif
-
-
-PR_END_EXTERN_C
-
-#endif /* pprio_h___ */