Change data pipe wrappers used by SerialConnection to use message pipe.

extensions/renderer/resources/data_sender.js

 // Copyright 2014 The Chromium Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 
 define('data_sender', [
-    'async_waiter',
     'device/serial/data_stream.mojom',
     'device/serial/data_stream_serialization.mojom',
     'mojo/public/js/bindings/core',
     'mojo/public/js/bindings/router',
-], function(asyncWaiter, dataStreamMojom, serialization, core, routerModule) {
+], function(dataStreamMojom, serialization, core, routerModule) {
   /**
    * @module data_sender
    */
 
   /**
    * A pending send operation.
    * @param {!ArrayBuffer} data The data to be sent.
    * @constructor
    * @alias module:data_sender~PendingSend
    * @private
@@ skipping 115 matching lines @@
     if (this.bytesReceivedBySink_ > this.length_) {
       result.bytesUnreported = this.bytesReceivedBySink_ - this.length_;
       this.bytesReceivedBySink_ = this.length_;
     }
     result.done = false;
     return result;
   };
 
   /**
    * Writes pending data into the data pipe.
-   * @param {!MojoHandle} handle The handle to the data pipe.
-   * @return {number} The Mojo result corresponding to the outcome:
-   *     <ul>
-   *     <li>RESULT_OK if the write completes successfully;
-   *     <li>RESULT_SHOULD_WAIT if some, but not all data was written; or
-   *     <li>the data pipe error if the write failed.
-   *     </ul>
+   * @param {!DataSink} sink The DataSink to receive the data.
+   * @param {number} availableBufferCapacity The maximum number of bytes to
+   *     send.
+   * @return {!Object} result The send result.
+   * @return {boolean} result.completed Whether all of the pending data was
+   *     sent.
+   * @return {number} result.remainingBufferCapacity The remaining send buffer
+   *     capacity.
    */
-  PendingSend.prototype.sendData = function(handle) {
-    var result = core.writeData(
-        handle, new Int8Array(this.data_), core.WRITE_DATA_FLAG_NONE);
-    if (result.result != core.RESULT_OK)
-      return result.result;
-    this.data_ = this.data_.slice(result.numBytes);
-    return this.data_.byteLength ? core.RESULT_SHOULD_WAIT : core.RESULT_OK;
+  PendingSend.prototype.sendData = function(sink, availableBufferCapacity) {
+    var numBytesToSend =
+        Math.min(availableBufferCapacity, this.data_.byteLength);
+    sink.onData(new Uint8Array(this.data_, 0, numBytesToSend));
+    this.data_ = this.data_.slice(numBytesToSend);
+    return {
+      completed: this.data_.byteLength == 0,
+      remainingBufferCapacity: availableBufferCapacity - numBytesToSend,
+    };
   };
 
   /**
    * A DataSender that sends data to a DataSink.
    * @param {!MojoHandle} handle The handle to the DataSink.
-   * @param {number} bufferSize How large a buffer the data pipe should use.
+   * @param {number} bufferSize How large a buffer to use for data.
    * @param {number} fatalErrorValue The send error value to report in the
    *     event of a fatal error.
    * @constructor
    * @alias module:data_sender.DataSender
    */
   function DataSender(handle, bufferSize, fatalErrorValue) {
-    var dataPipeOptions = {
-      flags: core.CREATE_DATA_PIPE_OPTIONS_FLAG_NONE,
-      elementNumBytes: 1,
-      capacityNumBytes: bufferSize,
-    };
-    var sendPipe = core.createDataPipe(dataPipeOptions);
-    this.init_(handle, sendPipe.producerHandle, fatalErrorValue);
-    this.sink_.init(sendPipe.consumerHandle);
+    this.init_(handle, fatalErrorValue, bufferSize);
+    this.sink_.init(bufferSize);
   }
 
   DataSender.prototype =
       $Object.create(dataStreamMojom.DataSinkClient.stubClass.prototype);
 
   /**
    * Closes this DataSender.
    */
   DataSender.prototype.close = function() {
     if (this.shutDown_)
       return;
     this.shutDown_ = true;
-    this.waiter_.stop();
     this.router_.close();
-    core.close(this.sendPipe_);
     while (this.pendingSends_.length) {
       this.pendingSends_.pop().reportBytesSentAndError(
           0, this.fatalErrorValue_);
     }
     while (this.sendsAwaitingAck_.length) {
       this.sendsAwaitingAck_.pop().reportBytesSentAndError(
           0, this.fatalErrorValue_);
     }
     this.callCancelCallback_();
   };
 
   /**
    * Initialize this DataSender.
    * @param {!MojoHandle} sink A handle to the DataSink
-   * @param {!MojoHandle} dataPipe A handle to use for sending data to the
-   *     DataSink.
    * @param {number} fatalErrorValue The error to dispatch in the event of a
    *     fatal error.
+   * @param {number} bufferSize The size of the send buffer.
    * @private
    */
-  DataSender.prototype.init_ = function(sink, dataPipe, fatalErrorValue) {
-    /**
-     * The handle to the data pipe to use for sending data.
-     * @private
-     */
-    this.sendPipe_ = dataPipe;
+  DataSender.prototype.init_ = function(sink, fatalErrorValue, bufferSize) {
     /**
      * The error to be dispatched in the event of a fatal error.
      * @const {number}
      * @private
      */
     this.fatalErrorValue_ = fatalErrorValue;
     /**
      * Whether this DataSender has shut down.
      * @type {boolean}
      * @private
      */
     this.shutDown_ = false;
     /**
      * The [Router]{@link module:mojo/public/js/bindings/router.Router} for the
      * connection to the DataSink.
      * @private
      */
     this.router_ = new routerModule.Router(sink);
     /**
      * The connection to the DataSink.
      * @private
      */
     this.sink_ = new dataStreamMojom.DataSink.proxyClass(this.router_);
     this.router_.setIncomingReceiver(this);
     /**
-     * The async waiter used to wait for
-     * {@link module:data_sender.DataSender#sendPipe_} to be writable.
-     * @type {!module:async_waiter.AsyncWaiter}
-     * @private
-     */
-    this.waiter_ = new asyncWaiter.AsyncWaiter(
-        this.sendPipe_, core.HANDLE_SIGNAL_WRITABLE,
-        this.onHandleReady_.bind(this));
-    /**
-     * A queue of sends that have not fully written their data to the data pipe.
+     * A queue of sends that have not fully sent their data to the DataSink.
      * @type {!module:data_sender~PendingSend[]}
      * @private
      */
     this.pendingSends_ = [];
     /**
-     * A queue of sends that have written their data to the data pipe, but have
-     * not been received by the DataSink.
+     * A queue of sends that have sent their data to the DataSink, but have not
+     * been received by the DataSink.
      * @type {!module:data_sender~PendingSend[]}
      * @private
      */
     this.sendsAwaitingAck_ = [];
 
     /**
      * The callback that will resolve a pending cancel if one is in progress.
      * @type {?Function}
      * @private
      */
     this.pendingCancel_ = null;
 
     /**
      * The promise that will be resolved when a pending cancel completes if one
      * is in progress.
      * @type {Promise}
      * @private
      */
     this.cancelPromise_ = null;
+    /**
+     * The available send buffer capacity.
+     * @type {number}
+     * @private
+     */
+    this.availableBufferCapacity_ = bufferSize;
   };
 
   /**
    * Serializes this DataSender.
    * This will cancel any sends in progress before the returned promise
    * resolves.
    * @return {!Promise.<SerializedDataSender>} A promise that will resolve to
    *     the serialization of this DataSender. If this DataSender has shut down,
    *     the promise will resolve to null.
    */
   DataSender.prototype.serialize = function() {
     if (this.shutDown_)
       return Promise.resolve(null);
 
     var readyToSerialize = Promise.resolve();
     if (this.pendingSends_.length || this.sendsAwaitingAck_.length) {
       if (this.pendingCancel_)
         readyToSerialize = this.cancelPromise_;
       else
         readyToSerialize = this.cancel(this.fatalErrorValue_);
     }
     return readyToSerialize.then(function() {
-      this.waiter_.stop();
       var serialized = new serialization.SerializedDataSender();
-      serialized.sink = this.router_.connector_.handle_,
-      serialized.data_pipe = this.sendPipe_,
-      serialized.fatal_error_value = this.fatalErrorValue_,
+      serialized.sink = this.router_.connector_.handle_;
+      serialized.fatal_error_value = this.fatalErrorValue_;
+      serialized.buffer_size = this.availableBufferCapacity_;
       this.router_.connector_.handle_ = null;
       this.router_.close();
       this.shutDown_ = true;
       return serialized;
     }.bind(this));
   };
 
   /**
    * Deserializes a SerializedDataSender.
    * @param {SerializedDataSender} serialized The serialized DataSender.
    * @return {!DataSender} The deserialized DataSender.
    */
   DataSender.deserialize = function(serialized) {
     var sender = $Object.create(DataSender.prototype);
     sender.deserialize_(serialized);
     return sender;
   };
 
   /**
    * Deserializes a SerializedDataSender into this DataSender.
    * @param {SerializedDataSender} serialized The serialized DataSender.
    * @private
    */
   DataSender.prototype.deserialize_ = function(serialized) {
     if (!serialized) {
       this.shutDown_ = true;
       return;
     }
     this.init_(
-        serialized.sink, serialized.data_pipe, serialized.fatal_error_value);
+        serialized.sink, serialized.fatal_error_value, serialized.buffer_size);
   };
 
   /**
    * Sends data to the DataSink.
    * @return {!Promise.<number>} A promise to the number of bytes sent. If an
    *     error occurs, the promise will reject with an Error object with a
    *     property error containing the error code.
    * @throws Will throw if this has encountered a fatal error or a cancel is in
    *     progress.
    */
   DataSender.prototype.send = function(data) {
     if (this.shutDown_)
       throw new Error('DataSender has been closed');
     if (this.pendingCancel_)
       throw new Error('Cancel in progress');
     var send = new PendingSend(data);
     this.pendingSends_.push(send);
-    if (!this.waiter_.isWaiting())
-      this.waiter_.start();
+    this.sendInternal_();
     return send.getPromise();
   };
 
+  DataSender.prototype.sendInternal_ = function() {
+    while (this.pendingSends_.length && this.availableBufferCapacity_) {
+      var result = this.pendingSends_[0].sendData(
+          this.sink_, this.availableBufferCapacity_);
+      this.availableBufferCapacity_ = result.remainingBufferCapacity;
+      if (result.completed) {
+        this.sendsAwaitingAck_.push(this.pendingSends_.shift());
+      }
+    }
+  };
+
   /**
    * Requests the cancellation of any in-progress sends. Calls to
    * [send()]{@link module:data_sender.DataSender#send} will fail until the
    * cancel has completed.
    * @param {number} error The error to report for cancelled sends.
    * @return {!Promise} A promise that will resolve when the cancel completes.
    * @throws Will throw if this has encountered a fatal error or another cancel
    *     is in progress.
    */
   DataSender.prototype.cancel = function(error) {
     if (this.shutDown_)
       throw new Error('DataSender has been closed');
     if (this.pendingCancel_)
       throw new Error('Cancel already in progress');
     if (this.pendingSends_.length + this.sendsAwaitingAck_.length == 0)
       return Promise.resolve();
 
     this.sink_.cancel(error);
     this.cancelPromise_ = new Promise(function(resolve) {
       this.pendingCancel_ = resolve;
     }.bind(this));
     return this.cancelPromise_;
   };
 
   /**
-   * Invoked when
-   * |[sendPipe_]{@link module:data_sender.DataSender#sendPipe_}| is ready to
-   * write. Writes to the data pipe if the wait is successful.
-   * @param {number} waitResult The result of the asynchronous wait.
-   * @private
-   */
-  DataSender.prototype.onHandleReady_ = function(result) {
-    if (result != core.RESULT_OK) {
-      this.close();
-      return;
-    }
-    while (this.pendingSends_.length) {
-      var result = this.pendingSends_[0].sendData(this.sendPipe_);
-      if (result == core.RESULT_OK) {
-        this.sendsAwaitingAck_.push(this.pendingSends_.shift());
-      } else if (result == core.RESULT_SHOULD_WAIT) {
-        this.waiter_.start();
-        return;
-      } else {
-        this.close();
-        return;
-      }
-    }
-  };
-
-  /**
    * Calls and clears the pending cancel callback if one is pending.
    * @private
    */
   DataSender.prototype.callCancelCallback_ = function() {
     if (this.pendingCancel_) {
       this.cancelPromise_ = null;
       this.pendingCancel_();
       this.pendingCancel_ = null;
     }
   };
 
   /**
    * Invoked by the DataSink to report that data has been successfully sent.
    * @param {number} numBytes The number of bytes sent.
    * @private
    */
   DataSender.prototype.reportBytesSent = function(numBytes) {
+    this.availableBufferCapacity_ += numBytes;
     while (numBytes > 0 && this.sendsAwaitingAck_.length) {
       var result = this.sendsAwaitingAck_[0].reportBytesSent(numBytes);
       numBytes = result.bytesUnreported;
       if (result.done)
         this.sendsAwaitingAck_.shift();
     }
     if (numBytes > 0 && this.pendingSends_.length) {
       var result = this.pendingSends_[0].reportBytesSent(numBytes);
       numBytes = result.bytesUnreported;
     }
     // A cancel is completed when all of the sends that were in progress have
     // completed or failed. This is the case where all sends complete
     // successfully.
     if (this.pendingSends_.length + this.sendsAwaitingAck_.length == 0)
       this.callCancelCallback_();
+
+    this.sendInternal_();
   };
 
   /**
    * Invoked by the DataSink to report an error in sending data.
    * @param {number} numBytes The number of bytes sent.
    * @param {number} error The error reported by the DataSink.
    * @private
    */
   DataSender.prototype.reportBytesSentAndError = function(numBytes, error) {
-    var bytesToFlush = 0;
+    this.availableBufferCapacity_ += numBytes;
     while (this.sendsAwaitingAck_.length) {
       var result = this.sendsAwaitingAck_[0].reportBytesSentAndError(
           numBytes, error);
       numBytes = result.bytesUnreported;
       this.sendsAwaitingAck_.shift();
-      bytesToFlush += result.bytesToFlush;
+      this.availableBufferCapacity_ += result.bytesToFlush;
     }
     while (this.pendingSends_.length) {
       var result = this.pendingSends_[0].reportBytesSentAndError(
           numBytes, error);
       numBytes = result.bytesUnreported;
       this.pendingSends_.shift();
       // Note: Only the first PendingSend in |pendingSends_| will have data to
-      // flush as only the first can have written data to the data pipe.
-      bytesToFlush += result.bytesToFlush;
+      // flush as only the first can have sent data to the DataSink.
+      this.availableBufferCapacity_ += result.bytesToFlush;
     }
     this.callCancelCallback_();
-    return Promise.resolve({bytes_to_flush: bytesToFlush});
+    return Promise.resolve();
   };
 
   return {DataSender: DataSender};
 });