Atheros AR600x driver + build glue

chromeos/drivers/ath6kl/include/bmi_msg.h

Index: chromeos/drivers/ath6kl/include/bmi_msg.h
diff --git a/chromeos/drivers/ath6kl/include/bmi_msg.h b/chromeos/drivers/ath6kl/include/bmi_msg.h
new file mode 100644
index 0000000000000000000000000000000000000000..1f48389f96645f9dd2191b8f08bcd81338702511
--- /dev/null
+++ b/chromeos/drivers/ath6kl/include/bmi_msg.h
@@ -0,0 +1,231 @@
+//------------------------------------------------------------------------------
+// <copyright file="bmi_msg.h" company="Atheros">
+//    Copyright (c) 2004-2009 Atheros Corporation.  All rights reserved.
+// 
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License version 2 as
+// published by the Free Software Foundation;
+//
+// Software distributed under the License is distributed on an "AS
+// IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+// implied. See the License for the specific language governing
+// rights and limitations under the License.
+//
+//
+//------------------------------------------------------------------------------
+//==============================================================================
+// Author(s): ="Atheros"
+//==============================================================================
+
+#ifndef __BMI_MSG_H__
+#define __BMI_MSG_H__
+
+/*
+ * Bootloader Messaging Interface (BMI)
+ *
+ * BMI is a very simple messaging interface used during initialization
+ * to read memory, write memory, execute code, and to define an
+ * application entry PC.
+ *
+ * It is used to download an application to AR6K, to provide
+ * patches to code that is already resident on AR6K, and generally
+ * to examine and modify state.  The Host has an opportunity to use
+ * BMI only once during bootup.  Once the Host issues a BMI_DONE
+ * command, this opportunity ends.
+ *
+ * The Host writes BMI requests to mailbox0, and reads BMI responses
+ * from mailbox0.   BMI requests all begin with a command
+ * (see below for specific commands), and are followed by
+ * command-specific data.
+ *
+ * Flow control:
+ * The Host can only issue a command once the Target gives it a
+ * "BMI Command Credit", using AR6K Counter #4.  As soon as the
+ * Target has completed a command, it issues another BMI Command
+ * Credit (so the Host can issue the next command).
+ *
+ * BMI handles all required Target-side cache flushing.
+ */
+
+
+/* Maximum data size used for BMI transfers */
+#define BMI_DATASZ_MAX                      256
+
+/* BMI Commands */
+
+#define BMI_NO_COMMAND                      0
+
+#define BMI_DONE                            1
+        /*
+         * Semantics: Host is done using BMI
+         * Request format:
+         *    A_UINT32      command (BMI_DONE)
+         * Response format: none
+         */
+
+#define BMI_READ_MEMORY                     2
+        /*
+         * Semantics: Host reads AR6K memory
+         * Request format:
+         *    A_UINT32      command (BMI_READ_MEMORY)
+         *    A_UINT32      address
+         *    A_UINT32      length, at most BMI_DATASZ_MAX
+         * Response format:
+         *    A_UINT8       data[length]
+         */
+
+#define BMI_WRITE_MEMORY                    3
+        /*
+         * Semantics: Host writes AR6K memory
+         * Request format:
+         *    A_UINT32       command (BMI_WRITE_MEMORY)
+         *    A_UINT32      address
+         *    A_UINT32      length, at most BMI_DATASZ_MAX
+         *    A_UINT8       data[length]
+         * Response format: none
+         */
+
+#define BMI_EXECUTE                         4
+        /*
+         * Semantics: Causes AR6K to execute code
+         * Request format:
+         *    A_UINT32      command (BMI_EXECUTE)
+         *    A_UINT32      address
+         *    A_UINT32      parameter
+         * Response format:
+         *    A_UINT32      return value
+         */
+
+#define BMI_SET_APP_START                   5
+        /*
+         * Semantics: Set Target application starting address
+         * Request format:
+         *    A_UINT32      command (BMI_SET_APP_START)
+         *    A_UINT32      address
+         * Response format: none
+         */
+
+#define BMI_READ_SOC_REGISTER               6
+        /*
+         * Semantics: Read a 32-bit Target SOC register.
+         * Request format:
+         *    A_UINT32      command (BMI_READ_REGISTER)
+         *    A_UINT32      address
+         * Response format: 
+         *    A_UINT32      value
+         */
+
+#define BMI_WRITE_SOC_REGISTER              7
+        /*
+         * Semantics: Write a 32-bit Target SOC register.
+         * Request format:
+         *    A_UINT32      command (BMI_WRITE_REGISTER)
+         *    A_UINT32      address
+         *    A_UINT32      value
+         *
+         * Response format: none
+         */
+
+#define BMI_GET_TARGET_ID                  8
+#define BMI_GET_TARGET_INFO                8
+        /*
+         * Semantics: Fetch the 4-byte Target information
+         * Request format:
+         *    A_UINT32      command (BMI_GET_TARGET_ID/INFO)
+         * Response format1 (old firmware):
+         *    A_UINT32      TargetVersionID
+         * Response format2 (newer firmware):
+         *    A_UINT32      TARGET_VERSION_SENTINAL
+         *    struct bmi_target_info;
+         */
+
+struct bmi_target_info {
+    A_UINT32 target_info_byte_count; /* size of this structure */
+    A_UINT32 target_ver;             /* Target Version ID */
+    A_UINT32 target_type;            /* Target type */
+};
+#define TARGET_VERSION_SENTINAL 0xffffffff
+#define TARGET_TYPE_AR6001 1
+#define TARGET_TYPE_AR6002 2
+#define TARGET_TYPE_AR6003 3
+
+
+#define BMI_ROMPATCH_INSTALL               9
+        /*
+         * Semantics: Install a ROM Patch.
+         * Request format:
+         *    A_UINT32      command (BMI_ROMPATCH_INSTALL)
+         *    A_UINT32      Target ROM Address
+         *    A_UINT32      Target RAM Address or Value (depending on Target Type)
+         *    A_UINT32      Size, in bytes
+         *    A_UINT32      Activate? 1-->activate;
+         *                            0-->install but do not activate
+         * Response format:
+         *    A_UINT32      PatchID
+         */
+
+#define BMI_ROMPATCH_UNINSTALL             10
+        /*
+         * Semantics: Uninstall a previously-installed ROM Patch,
+         * automatically deactivating, if necessary.
+         * Request format:
+         *    A_UINT32      command (BMI_ROMPATCH_UNINSTALL)
+         *    A_UINT32      PatchID
+         *
+         * Response format: none
+         */
+
+#define BMI_ROMPATCH_ACTIVATE              11
+        /*
+         * Semantics: Activate a list of previously-installed ROM Patches.
+         * Request format:
+         *    A_UINT32      command (BMI_ROMPATCH_ACTIVATE)
+         *    A_UINT32      rompatch_count
+         *    A_UINT32      PatchID[rompatch_count]
+         *
+         * Response format: none
+         */
+
+#define BMI_ROMPATCH_DEACTIVATE            12
+        /*
+         * Semantics: Deactivate a list of active ROM Patches.
+         * Request format:
+         *    A_UINT32      command (BMI_ROMPATCH_DEACTIVATE)
+         *    A_UINT32      rompatch_count
+         *    A_UINT32      PatchID[rompatch_count]
+         *
+         * Response format: none
+         */
+
+
+#define BMI_LZ_STREAM_START                13
+        /*
+         * Semantics: Begin an LZ-compressed stream of input
+         * which is to be uncompressed by the Target to an
+         * output buffer at address.  The output buffer must
+         * be sufficiently large to hold the uncompressed
+         * output from the compressed input stream.  This BMI
+         * command should be followed by a series of 1 or more
+         * BMI_LZ_DATA commands.
+         *    A_UINT32      command (BMI_LZ_STREAM_START)
+         *    A_UINT32      address
+         * Note: Not supported on all versions of ROM firmware.
+         */
+
+#define BMI_LZ_DATA                        14
+        /*
+         * Semantics: Host writes AR6K memory with LZ-compressed
+         * data which is uncompressed by the Target.  This command
+         * must be preceded by a BMI_LZ_STREAM_START command. A series
+         * of BMI_LZ_DATA commands are considered part of a single
+         * input stream until another BMI_LZ_STREAM_START is issued.
+         * Request format:
+         *    A_UINT32      command (BMI_LZ_DATA)
+         *    A_UINT32      length (of compressed data),
+         *                  at most BMI_DATASZ_MAX
+         *    A_UINT8       CompressedData[length]
+         * Response format: none
+         * Note: Not supported on all versions of ROM firmware.
+         */
+
+#endif /* __BMI_MSG_H__ */