Atheros AR600x driver + build glue

chromeos/drivers/ath6kl/os/linux/include/ieee80211_ioctl.h

+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * 
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License version 2 as
+// published by the Free Software Foundation;
+//
+// Software distributed under the License is distributed on an "AS
+// IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+// implied. See the License for the specific language governing
+// rights and limitations under the License.
+//
+//
+ *
+ */
+
+#ifndef _IEEE80211_IOCTL_H_
+#define _IEEE80211_IOCTL_H_
+
+#include <linux/version.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * Extracted from the MADWIFI net80211/ieee80211_ioctl.h
+ */
+
+/*
+ * WPA/RSN get/set key request.  Specify the key/cipher
+ * type and whether the key is to be used for sending and/or
+ * receiving.  The key index should be set only when working
+ * with global keys (use IEEE80211_KEYIX_NONE for ``no index'').
+ * Otherwise a unicast/pairwise key is specified by the bssid
+ * (on a station) or mac address (on an ap).  They key length
+ * must include any MIC key data; otherwise it should be no
+ more than IEEE80211_KEYBUF_SIZE.
+ */
+struct ieee80211req_key {
+    u_int8_t    ik_type;    /* key/cipher type */
+    u_int8_t    ik_pad;
+    u_int16_t   ik_keyix;   /* key index */
+    u_int8_t    ik_keylen;  /* key length in bytes */
+    u_int8_t    ik_flags;
+#define IEEE80211_KEY_XMIT  0x01
+#define IEEE80211_KEY_RECV  0x02
+#define IEEE80211_KEY_DEFAULT   0x80    /* default xmit key */
+    u_int8_t    ik_macaddr[IEEE80211_ADDR_LEN];
+    u_int64_t   ik_keyrsc;  /* key receive sequence counter */
+    u_int64_t   ik_keytsc;  /* key transmit sequence counter */
+    u_int8_t    ik_keydata[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE];
+};
+/*
+ * Delete a key either by index or address.  Set the index
+ * to IEEE80211_KEYIX_NONE when deleting a unicast key.
+ */
+struct ieee80211req_del_key {
+    u_int8_t    idk_keyix;  /* key index */
+    u_int8_t    idk_macaddr[IEEE80211_ADDR_LEN];
+};
+/*
+ * MLME state manipulation request.  IEEE80211_MLME_ASSOC
+ * only makes sense when operating as a station.  The other
+ * requests can be used when operating as a station or an
+ * ap (to effect a station).
+ */
+struct ieee80211req_mlme {
+    u_int8_t    im_op;      /* operation to perform */
+#define IEEE80211_MLME_ASSOC        1   /* associate station */
+#define IEEE80211_MLME_DISASSOC     2   /* disassociate station */
+#define IEEE80211_MLME_DEAUTH       3   /* deauthenticate station */
+#define IEEE80211_MLME_AUTHORIZE    4   /* authorize station */
+#define IEEE80211_MLME_UNAUTHORIZE  5   /* unauthorize station */
+    u_int16_t   im_reason;  /* 802.11 reason code */
+    u_int8_t    im_macaddr[IEEE80211_ADDR_LEN];
+};
+
+struct ieee80211req_addpmkid {
+    u_int8_t    pi_bssid[IEEE80211_ADDR_LEN];
+    u_int8_t    pi_enable;
+    u_int8_t    pi_pmkid[16];
+};
+
+#define AUTH_ALG_OPEN_SYSTEM    0x01
+#define AUTH_ALG_SHARED_KEY 0x02
+#define AUTH_ALG_LEAP       0x04
+
+struct ieee80211req_authalg {
+   u_int8_t auth_alg;
+};  
+
+/* 
+ * Request to add an IE to a Management Frame
+ */
+enum{
+    IEEE80211_APPIE_FRAME_BEACON     = 0,
+    IEEE80211_APPIE_FRAME_PROBE_REQ  = 1,
+    IEEE80211_APPIE_FRAME_PROBE_RESP = 2,
+    IEEE80211_APPIE_FRAME_ASSOC_REQ  = 3,
+    IEEE80211_APPIE_FRAME_ASSOC_RESP = 4,
+    IEEE80211_APPIE_NUM_OF_FRAME     = 5
+};
+
+/*
+ * The Maximum length of the IE that can be added to a Management frame
+ */
+#define IEEE80211_APPIE_FRAME_MAX_LEN  200
+
+struct ieee80211req_getset_appiebuf {
+    u_int32_t app_frmtype; /* management frame type for which buffer is added */
+    u_int32_t app_buflen;  /*application supplied buffer length */
+    u_int8_t  app_buf[];
+};
+
+/* 
+ * The following definitions are used by an application to set filter
+ * for receiving management frames 
+ */
+enum {
+     IEEE80211_FILTER_TYPE_BEACON      =   0x1,
+     IEEE80211_FILTER_TYPE_PROBE_REQ   =   0x2,
+     IEEE80211_FILTER_TYPE_PROBE_RESP  =   0x4,
+     IEEE80211_FILTER_TYPE_ASSOC_REQ   =   0x8,
+     IEEE80211_FILTER_TYPE_ASSOC_RESP  =   0x10,
+     IEEE80211_FILTER_TYPE_AUTH        =   0x20,
+     IEEE80211_FILTER_TYPE_DEAUTH      =   0x40,
+     IEEE80211_FILTER_TYPE_DISASSOC    =   0x80,
+     IEEE80211_FILTER_TYPE_ALL         =   0xFF  /* used to check the valid filter bits */
+};
+
+struct ieee80211req_set_filter {
+      u_int32_t app_filterype; /* management frame filter type */
+};
+
+enum {
+    IEEE80211_PARAM_AUTHMODE = 3,   /* Authentication Mode */
+    IEEE80211_PARAM_MCASTCIPHER = 5,
+    IEEE80211_PARAM_MCASTKEYLEN = 6,    /* multicast key length */
+    IEEE80211_PARAM_UCASTCIPHER = 8,
+    IEEE80211_PARAM_UCASTKEYLEN = 9,    /* unicast key length */
+    IEEE80211_PARAM_WPA     = 10,   /* WPA mode (0,1,2) */
+    IEEE80211_PARAM_ROAMING     = 12,   /* roaming mode */
+    IEEE80211_PARAM_PRIVACY     = 13,   /* privacy invoked */
+    IEEE80211_PARAM_COUNTERMEASURES = 14,   /* WPA/TKIP countermeasures */
+    IEEE80211_PARAM_DROPUNENCRYPTED = 15,   /* discard unencrypted frames */
+    IEEE80211_PARAM_WAPI = 16,   /* WAPI policy from wapid */        
+};
+
+/*
+ * Values for IEEE80211_PARAM_WPA
+ */
+#define WPA_MODE_WPA1   1
+#define WPA_MODE_WPA2   2
+#define WPA_MODE_AUTO   3
+#define WPA_MODE_NONE   4
+
+struct ieee80211req_wpaie {
+    u_int8_t    wpa_macaddr[IEEE80211_ADDR_LEN];
+    u_int8_t    wpa_ie[IEEE80211_MAX_IE];
+    u_int8_t    rsn_ie[IEEE80211_MAX_IE];
+};
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27)
+#define IW_ENCODE_ALG_PMK       4
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _IEEE80211_IOCTL_H_ */