Keep only base/extractor.[cc|h].

common/const_cmd_line.h

Index: common/const_cmd_line.h
diff --git a/common/const_cmd_line.h b/common/const_cmd_line.h
deleted file mode 100644
index 1a960835170f6612f47954661c7203216f2015f5..0000000000000000000000000000000000000000
--- a/common/const_cmd_line.h
+++ /dev/null
@@ -1,310 +0,0 @@
-// Copyright 2007-2009 Google Inc.
-//
-// Licensed under the Apache License, Version 2.0 (the "License");
-// you may not use this file except in compliance with the License.
-// You may obtain a copy of the License at
-//
-//      http://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing, software
-// distributed under the License is distributed on an "AS IS" BASIS,
-// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-// See the License for the specific language governing permissions and
-// limitations under the License.
-// ========================================================================
-//
-// Constants used as command line arguments.
-
-#ifndef OMAHA_COMMON_CONST_CMD_LINE_H__
-#define OMAHA_COMMON_CONST_CMD_LINE_H__
-
-namespace omaha {
-
-//
-// Externally initiated modes.
-// These modes are invoked by or on metainstallers or by the OneClick plugin  .
-//
-
-// The "install" switch indicates installing Omaha and the app.
-const TCHAR* const kCmdLineInstall = _T("install");
-
-// The "installelevated" switch indicates installing after elevating.
-const TCHAR* const kCmdLineInstallElevated = _T("installelevated");
-
-// The "update" switch indicates an Omaha self-update.
-const TCHAR* const kCmdLineUpdate = _T("update");
-
-// The "recover" switch indicates Omaha is to be repaired due to a
-// Code Red scenario.
-const TCHAR* const kCmdLineRecover = _T("recover");
-
-// The "pi" switch indicates that this came from a webplugin.
-// Requires two subarguments "siteurl" and "{args}" where
-// siteurl is the base URL where the plugin ran from and {args}
-// are the args to pass on once validation is complete.
-const TCHAR* const kCmdLineWebPlugin = _T("pi");
-
-//
-// Main operating modes
-//
-
-// The "c" option indicates a core process.
-const TCHAR* const kCmdLineCore = _T("c");
-
-// Specifies to not kick off the crash handler from the Core.
-const TCHAR* const kCmdLineNoCrashHandler = _T("nocrashserver");
-
-// The "crashhandler" option indicates a crash handler process.
-const TCHAR* const kCmdLineCrashHandler = _T("crashhandler");
-
-// Types of "Workers"
-
-// The "handoff" switch indicates a worker to perform an interactive install of
-// an application.
-const TCHAR* const kCmdLineAppHandoffInstall = _T("handoff");
-
-// The "ig" switch was used in Omaha 2 to indicate a worker to finish installing
-// Omaha and perform an interactive install of an application.
-// ig = Install Google Update.
-const TCHAR* const kCmdLineLegacyFinishGoogleUpdateInstall = _T("ig");
-
-// The "ua" switch indicates a worker to perform an update check for all
-// applications.
-// ua = Update Applications.
-const TCHAR* const kCmdLineUpdateApps = _T("ua");
-
-// The "cr" switch indicates that the worker has been invoked to perform a Code
-// Red check.
-const TCHAR* const kCmdLineCodeRedCheck = _T("cr");
-
-// The "registerproduct" switch will register a product GUID in Clients and
-// install only Omaha.
-const TCHAR* const kCmdLineRegisterProduct = _T("registerproduct");
-
-// The "unregisterproduct" switch will unregister a product GUID from Clients.
-const TCHAR* const kCmdLineUnregisterProduct = _T("unregisterproduct");
-
-//
-// Minor modes
-//
-
-// The "svc" switch indicates that Omaha runs as a service that only accepts
-// calls from high integrity COM callers.
-const TCHAR* const kCmdLineService = _T("svc");
-
-// The "medsvc" switch indicates that Omaha runs as a service that accepts
-// calls from medium integrity COM callers.
-const TCHAR* const kCmdLineMediumService = _T("medsvc");
-
-// The "regsvc" switch is used to register the service. Only used by unit
-// tests at the moment.
-const TCHAR* const kCmdLineRegisterService = _T("regsvc");
-
-// The "unregsvc" switch is used to unregister the service. Only used by
-// unit tests at the moment.
-const TCHAR* const kCmdLineUnregisterService = _T("unregsvc");
-
-// The "/comsvc" switch indicates that has the service is being invoked via COM.
-// This switch will be passed in via ServiceParameters.
-const TCHAR* const kCmdLineServiceComServer = _T("/comsvc");
-
-// The "regserver" switch indicates that Omaha should do its Windows
-// service COM server registration including coclasses and its APPID.
-const TCHAR* const kCmdRegServer = _T("regserver");
-
-// The "unregserver" switch indicates that Omaha should undo its
-// COM registration.
-const TCHAR* const kCmdUnregServer = _T("unregserver");
-
-// The "report" switch makes Omaha upload the crash report.
-const TCHAR* const kCmdLineReport = _T("report");
-
-// The "custom_info_filename" switch specifies the file that contains custom
-// crash info.
-const TCHAR* const kCmdLineCustomInfoFileName = _T("custom_info_filename");
-
-// The "Embedding" switch indicates that the worker has been invoked to launch
-// the browser. The -Embedding switch is automatically added by COM when
-// launching the COM server.
-const TCHAR* const kCmdLineComServer = _T("Embedding");
-const TCHAR* const kCmdLineComServerDash = _T("-Embedding");
-
-// Activates broker mode. Broker mode is intended to facilitate communication
-// between low-integrity clients and the high-integrity Omaha DCOM service.
-const TCHAR* const kCmdLineComBroker = _T("/broker");
-
-// Activates OnDemand mode.
-const TCHAR* const kCmdLineOnDemand = _T("/ondemand");
-
-// The "uninstall" switch indicates that Omaha should uninstall if appropriate.
-const TCHAR* const kCmdLineUninstall = _T("uninstall");
-
-// The "ping" switch makes Omaha send a ping with the specified string. The
-// string is expected to be web safe base64 encoded and it will be decoded
-// before sending it to the server.
-const TCHAR* const kCmdLinePing = _T("ping");
-
-//
-// Non-product modes
-// These are used for debug, testing, etc.
-//
-
-// Run network diagnostics.
-const TCHAR* const kCmdLineNetDiags = _T("netdiags");
-
-// The "crash" switch indicates that Omaha should crash upon startup.
-// This option is used to test the crash reporting system.
-const TCHAR* const kCmdLineCrash = _T("crash");
-
-//
-// Parameters for other modes
-//
-
-// The "silent" switch specifies that normally interactive modes should run
-// silently.
-const TCHAR* const kCmdLineSilent = _T("silent");
-
-const TCHAR* const kCmdLineLegacyOfflineInstall = _T("offlineinstall");
-const TCHAR* const kCmdLineOfflineDir = _T("offlinedir");
-
-// The "oem" switch specifies that this is an OEM install in Sysprep mode in an
-// OEM factory.
-const TCHAR* const kCmdLineOem = _T("oem");
-
-// The "eularequired" switch specifies that a EULA must be accepted before
-// checking for updates or pinging.
-const TCHAR* const kCmdLineEulaRequired = _T("eularequired");
-
-// The "machine" switch specifies to repair machine Omaha when specified with
-// "recover". Also used to tell the setup phase 2 worker to do a machine install
-// when doing a recover setup.
-const TCHAR* const kCmdLineMachine = _T("machine");
-
-// The "i" switch indicates that the crash has happend in an
-// interactive process which has a UI up. The switch is an option for
-// the "report" switch.
-const TCHAR* const kCmdLineInteractive = _T("i");
-
-// The "sessionid" switch indicates that a specific session ID should be used by
-// this instance of Omaha for network requests.  This switch is an option for
-// the "install", "handoff", and "update" modes.
-const TCHAR* const kCmdLineSessionId = _T("sessionid");
-
-// The "installsource" switch that is used to pass the source of installation
-// for ping tracking.  For example:  "/installsource OneClick".
-const TCHAR* const kCmdLineInstallSource = _T("installsource");
-
-// installsource values generated internally by Omaha.
-const TCHAR* const kCmdLineInstallSource_TaggedMetainstaller = _T("taggedmi");
-const TCHAR* const kCmdLineInstallSource_OneClick = _T("oneclick");
-const TCHAR* const kCmdLineInstallSource_ClickOnce = _T("clickonce");
-const TCHAR* const kCmdLineInstallSource_Offline = _T("offline");
-const TCHAR* const kCmdLineInstallSource_InstallDefault = _T("otherinstallcmd");
-const TCHAR* const kCmdLineInstallSource_Scheduler = _T("scheduler");
-const TCHAR* const kCmdLineInstallSource_Core = _T("core");
-const TCHAR* const kCmdLineInstallSource_OnDemandUpdate = _T("ondemandupdate");
-const TCHAR* const kCmdLineInstallSource_OnDemandCheckForUpdate =
-    _T("ondemandcheckforupdate");
-const TCHAR* const kCmdLineInstallSource_OnDemandUA = _T("ondemandua");
-const TCHAR* const kCmdLineInstallSource_SelfUpdate = _T("selfupdate");
-const TCHAR* const kCmdLineInstallSource_Update3Web = _T("update3web");
-const TCHAR* const kCmdLineInstallSource_Update3Web_NewApps =
-    _T("update3web-newapps");
-const TCHAR* const kCmdLineInstallSource_Update3Web_OnDemand =
-    _T("update3web-ondemand");
-const TCHAR* const kCmdLineInstallSource_Update3Web_Components =
-    _T("update3web-components");
-
-// This install source is not used as a command line argument but internally
-// created by Omaha.
-const TCHAR* const kInstallSource_Uninstall = _T("uninstall");
-
-//
-// "Extra" arguments provided in the metainstaller tag.
-//
-
-// "bundlename" extra argument is the name of the bundle being installed. If not
-// specified, the first app's appname is used.
-const TCHAR* const kExtraArgBundleName = _T("bundlename");
-
-// "lang" extra argument tells Omaha the language of the product the user is
-// installing.
-const TCHAR* const kExtraArgLanguage = _T("lang");
-
-// "usagestats" extra argument tells Omaha the user has agreed to provide
-// usage stats, crashreports etc.
-const TCHAR* const kExtraArgUsageStats = _T("usagestats");
-
-// "iid" extra argument is a unique value for this installation session.
-// It can be used to follow the progress from the website to installation
-// completion.
-const TCHAR* const kExtraArgInstallationId = _T("iid");
-
-// "brand" extra argument is the Brand Code used for branding.
-// If a brand value already exists on the system, it is ignored.
-// This value is used to set the initial brand for Omaha and the client app.
-const TCHAR* const kExtraArgBrandCode = _T("brand");
-
-// "client" extra argument is the Client ID used for branding.
-// If a client value already exists on the system, it is ignored.
-// This value is used to set the initial client for Omaha and the client app.
-const TCHAR* const kExtraArgClientId = _T("client");
-
-// "experiments" extra argument is a set of experiment labels used to track
-// installs that are included in experiments.  Use "experiments" for
-// per-app arguments; use "omahaexperiments" for Omaha-specific labels.
-const TCHAR* const kExtraArgExperimentLabels = _T("experiments");
-const TCHAR* const kExtraArgOmahaExperimentLabels = _T("omahaexperiments");
-
-// "referral" extra argument is a referral ID used for tracking referrals.
-const TCHAR* const kExtraArgReferralId = _T("referral");
-
-// "ap" extra argument tells Omaha to set the ap value in the registry.
-const TCHAR* const kExtraArgAdditionalParameters = _T("ap");
-
-// "tttoken" extra argument tells Omaha to set the TT value in the registry.
-const TCHAR* const kExtraArgTTToken = _T("tttoken");
-
-// "browser" extra argument tells Omaha which browser to restart on
-// successful install.
-const TCHAR* const kExtraArgBrowserType = _T("browser");
-
-// "runtime" extra argument tells Omaha to only install itself, staying on
-// the system without any associated application for at least 24 hours.
-// This is used to expose our COM API to a process that will install
-// applications via that API after the meta-installer exits.
-const TCHAR* const kExtraArgRuntime = _T("runtime");
-
-// The list of arguments that are needed for a meta-installer, to
-// indicate which application is being installed. These are stamped
-// inside the meta-installer binary.
-const TCHAR* const kExtraArgAppGuid = _T("appguid");
-const TCHAR* const kExtraArgAppName = _T("appname");
-const TCHAR* const kExtraArgNeedsAdmin = _T("needsadmin");
-const TCHAR* const kExtraArgInstallDataIndex = _T("installdataindex");
-
-// App arguments are arguments explicitly passed on the command line. They are
-// formatted similar to the regular extra args. For example:
-//     /appargs "appguid={GUID}&installerdata=BlahData"
-// Unlike the regular extra args, they are not embedded in the executable.
-const TCHAR* const kCmdLineAppArgs = _T("appargs");
-
-// This switch allows extra data to be communicated to the application
-// installer. The extra data needs to be URL-encoded. The data will be decoded
-// and written to the file, that is then passed in the command line to the
-// application installer in the form "/installerdata=blah.dat". One per
-// application.
-const TCHAR* const kExtraArgInstallerData = _T("installerdata");
-
-//
-// Parsing characters
-//
-
-const TCHAR* const kExtraArgsSeparators        = _T("&");
-const TCHAR* const kDisallowedCharsInExtraArgs = _T("/");
-const TCHAR        kNameValueSeparatorChar     = _T('=');
-
-}  // namespace omaha
-
-#endif  // OMAHA_COMMON_CONST_CMD_LINE_H__
-