Move mojo edk into mojo/edk

mojo/system/channel_endpoint.cc

Index: mojo/system/channel_endpoint.cc
diff --git a/mojo/system/channel_endpoint.cc b/mojo/system/channel_endpoint.cc
deleted file mode 100644
index dbd3fdb6861cb4b6638b77e956b8100e2bf6bc3d..0000000000000000000000000000000000000000
--- a/mojo/system/channel_endpoint.cc
+++ /dev/null
@@ -1,183 +0,0 @@
-// Copyright 2014 The Chromium Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-
-#include "mojo/system/channel_endpoint.h"
-
-#include "base/logging.h"
-#include "mojo/system/channel.h"
-#include "mojo/system/message_pipe.h"
-#include "mojo/system/transport_data.h"
-
-namespace mojo {
-namespace system {
-
-ChannelEndpoint::ChannelEndpoint(MessagePipe* message_pipe, unsigned port)
-    : state_(STATE_NORMAL),
-      message_pipe_(message_pipe),
-      port_(port),
-      channel_(),
-      local_id_(MessageInTransit::kInvalidEndpointId),
-      remote_id_(MessageInTransit::kInvalidEndpointId) {
-  DCHECK(message_pipe_.get());
-  DCHECK(port_ == 0 || port_ == 1);
-}
-
-void ChannelEndpoint::TakeMessages(MessageInTransitQueue* message_queue) {
-  DCHECK(paused_message_queue_.IsEmpty());
-  paused_message_queue_.Swap(message_queue);
-}
-
-bool ChannelEndpoint::EnqueueMessage(scoped_ptr<MessageInTransit> message) {
-  DCHECK(message);
-
-  base::AutoLock locker(lock_);
-
-  if (!channel_ || remote_id_ == MessageInTransit::kInvalidEndpointId) {
-    // We may reach here if we haven't been attached or run yet.
-    // TODO(vtl): We may also reach here if the channel is shut down early for
-    // some reason (with live message pipes on it). We can't check |state_| yet,
-    // until it's protected under lock, but in this case we should return false
-    // (and not enqueue any messages).
-    paused_message_queue_.AddMessage(message.Pass());
-    return true;
-  }
-
-  // TODO(vtl): Currently, this only works in the "running" case.
-  DCHECK_NE(remote_id_, MessageInTransit::kInvalidEndpointId);
-
-  return WriteMessageNoLock(message.Pass());
-}
-
-void ChannelEndpoint::DetachFromMessagePipe() {
-  // TODO(vtl): Once |message_pipe_| is under |lock_|, we should null it out
-  // here. For now, get the channel to do so for us.
-
-  scoped_refptr<Channel> channel;
-  {
-    base::AutoLock locker(lock_);
-    DCHECK(message_pipe_.get());
-    message_pipe_ = nullptr;
-
-    if (!channel_)
-      return;
-    DCHECK_NE(local_id_, MessageInTransit::kInvalidEndpointId);
-    // TODO(vtl): Once we combine "run" into "attach", |remote_id_| should valid
-    // here as well.
-    channel = channel_;
-  }
-  // Don't call this under |lock_|, since it'll call us back.
-  // TODO(vtl): This seems pretty suboptimal.
-  channel->DetachMessagePipeEndpoint(local_id_, remote_id_);
-}
-
-void ChannelEndpoint::AttachToChannel(Channel* channel,
-                                      MessageInTransit::EndpointId local_id) {
-  DCHECK(channel);
-  DCHECK_NE(local_id, MessageInTransit::kInvalidEndpointId);
-
-  base::AutoLock locker(lock_);
-  DCHECK(!channel_);
-  DCHECK_EQ(local_id_, MessageInTransit::kInvalidEndpointId);
-  channel_ = channel;
-  local_id_ = local_id;
-}
-
-void ChannelEndpoint::Run(MessageInTransit::EndpointId remote_id) {
-  DCHECK_NE(remote_id, MessageInTransit::kInvalidEndpointId);
-
-  base::AutoLock locker(lock_);
-  DCHECK(channel_);
-  DCHECK_EQ(remote_id_, MessageInTransit::kInvalidEndpointId);
-  remote_id_ = remote_id;
-
-  while (!paused_message_queue_.IsEmpty()) {
-    LOG_IF(WARNING, !WriteMessageNoLock(paused_message_queue_.GetMessage()))
-        << "Failed to write enqueue message to channel";
-  }
-}
-
-bool ChannelEndpoint::OnReadMessage(
-    const MessageInTransit::View& message_view,
-    embedder::ScopedPlatformHandleVectorPtr platform_handles) {
-  scoped_ptr<MessageInTransit> message(new MessageInTransit(message_view));
-  scoped_refptr<MessagePipe> message_pipe;
-  unsigned port;
-  {
-    base::AutoLock locker(lock_);
-    DCHECK(channel_);
-    if (!message_pipe_.get()) {
-      // This isn't a failure per se. (It just means that, e.g., the other end
-      // of the message point closed first.)
-      return true;
-    }
-
-    if (message_view.transport_data_buffer_size() > 0) {
-      DCHECK(message_view.transport_data_buffer());
-      message->SetDispatchers(TransportData::DeserializeDispatchers(
-          message_view.transport_data_buffer(),
-          message_view.transport_data_buffer_size(),
-          platform_handles.Pass(),
-          channel_));
-    }
-
-    // Take a ref, and call |EnqueueMessage()| outside the lock.
-    message_pipe = message_pipe_;
-    port = port_;
-  }
-
-  MojoResult result = message_pipe->EnqueueMessage(
-      MessagePipe::GetPeerPort(port), message.Pass());
-  return (result == MOJO_RESULT_OK);
-}
-
-void ChannelEndpoint::OnDisconnect() {
-  scoped_refptr<MessagePipe> message_pipe;
-  unsigned port;
-  {
-    base::AutoLock locker(lock_);
-    if (!message_pipe_.get())
-      return;
-
-    // Take a ref, and call |Close()| outside the lock.
-    message_pipe = message_pipe_;
-    port = port_;
-  }
-  message_pipe->Close(port);
-}
-
-void ChannelEndpoint::DetachFromChannel() {
-  base::AutoLock locker(lock_);
-  DCHECK(channel_);
-  DCHECK_NE(local_id_, MessageInTransit::kInvalidEndpointId);
-  // TODO(vtl): Once we combine "run" into "attach", |remote_id_| should valid
-  // here as well.
-  channel_ = nullptr;
-  local_id_ = MessageInTransit::kInvalidEndpointId;
-  remote_id_ = MessageInTransit::kInvalidEndpointId;
-}
-
-ChannelEndpoint::~ChannelEndpoint() {
-  DCHECK(!message_pipe_.get());
-  DCHECK(!channel_);
-  DCHECK_EQ(local_id_, MessageInTransit::kInvalidEndpointId);
-  DCHECK_EQ(remote_id_, MessageInTransit::kInvalidEndpointId);
-}
-
-bool ChannelEndpoint::WriteMessageNoLock(scoped_ptr<MessageInTransit> message) {
-  DCHECK(message);
-
-  lock_.AssertAcquired();
-
-  DCHECK(channel_);
-  DCHECK_NE(local_id_, MessageInTransit::kInvalidEndpointId);
-  DCHECK_NE(remote_id_, MessageInTransit::kInvalidEndpointId);
-
-  message->SerializeAndCloseDispatchers(channel_);
-  message->set_source_id(local_id_);
-  message->set_destination_id(remote_id_);
-  return channel_->WriteMessage(message.Pass());
-}
-
-}  // namespace system
-}  // namespace mojo