Add the Snapshot interface

snapshot/system_snapshot.h

+// Copyright 2014 The Crashpad Authors. All rights reserved.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#ifndef CRASHPAD_SNAPSHOT_SYSTEM_SNAPSHOT_H_
+#define CRASHPAD_SNAPSHOT_SYSTEM_SNAPSHOT_H_
+
+#include <stdint.h>
+#include <sys/types.h>
+
+#include <string>
+
+namespace crashpad {
+
+//! \brief An abstract interface to a snapshot representing the state of a
+//!     system, comprising an operating system, CPU architecture, and various
+//!     other characteristics.
+class SystemSnapshot {
+ public:
+  //! \brief A system’s CPU architecture.
+  enum CPUArchitecture {

[Robert Sesek, 2014/09/25 15:44:08]

This seems redundant with the CPUContext::ContextFlavor. Maybe something in
util/ that just defines these centrally?

+    //! \brief The snapshot system’s CPU architecture is unknown.
+    kCPUArchitectureUnknown = 0,
+
+    //! \brief 32-bit x86 (not 64-bit-capable).
+    kCPUArchitectureX86,
+
+    //! \brief x86_64.
+    kCPUArchitectureX86_64,
+  };
+
+  //! \brief A system’s operating system family.
+  enum OperatingSystem {
+    //! \brief The snapshot system’s operating system is unknown.
+    kOperatingSystemUnknown = 0,
+
+    //! \brief Mac OS X.
+    kOperatingSystemMacOSX,
+  };
+
+  //! \brief A system’s daylight saving time status.
+  //!
+  //! The daylight saving time status is taken partially from the system’s
+  //! locale configuration. This determines whether daylight saving time is
+  //! ever observed on the system. If it is, the snapshot’s time
+  //! (ProcessSnapshot::SnapshotTime()) is used to determine whether the system
+  //! was observing daylight saving time at the time of the snapshot.
+  enum DaylightSavingTimeStatus {
+    //! \brief Daylight saving time is never observed on the snapshot system.
+    kDoesNotObserveDaylightSavingTime = 0,
+
+    //! \brief Daylight saving time is observed on the snapshot system when in
+    //!     effect, but standard time was in effect at the time of the snapshot.
+    kObservingStandardTime,
+
+    //! \brief Daylight saving time is observed on the snapshot system when in
+    //!     effect, and daylight saving time was in effect at the time of the
+    //!     snapshot.
+    kObservingDaylightSavingTime,
+  };
+
+  //! \brief Returns the snapshot system’s CPU architecture.
+  virtual CPUArchitecture GetCPUArchitecture() = 0;
+
+  //! \brief Returns the snapshot system’s CPU revision.
+  //!
+  //! For x86-family CPUs (including x86_64 and 32-bit x86), this is the CPU
+  //! family ID value from `cpuid 1` `eax`, adjusted to take the extended family
+  //! ID into account.
+  //!
+  //! \return A CPU architecture-specific value identifying the CPU revision.
+  virtual uint32_t CPURevision() = 0;
+
+  //! \brief Returns the total number of CPUs present in the snapshot system.
+  virtual uint8_t CPUCount() = 0;
+
+  //! \brief Returns the vendor of the snapshot system’s CPUs.
+  //!
+  //! For x86-family CPUs (including x86_64 and 32-bit x86), this is the CPU
+  //! vendor identification string as encoded in `cpuid 0` `ebx`, `edx`, and
+  //! `ecx`.
+  //!
+  //! \return A string identifying the vendor of the snapshot system’s CPUs.
+  virtual std::string CPUVendor() = 0;
+
+  //! \brief Returns frequency information about the snapshot system’s CPUs in
+  //!     \current_hz and \a max_hz.
+  //!
+  //! \param[out] current_hz The snapshot system’s CPU clock frequency in Hz at
+  //!     the time of the snapshot.
+  //! \param[out] max_hz The snapshot system’s maximum possible CPU clock
+  //!     frequency.
+  virtual void CPUFrequency(uint64_t* current_hz, uint64_t* max_hz) = 0;
+
+  //! \brief Returns an x86-family snapshot system’s CPU signature.
+  //!
+  //! This is the family, model, and stepping ID values as encoded in `cpuid 1`
+  //! `eax`.
+  //!
+  //! This method must only be called when GetCPUArchitecture() indicates an
+  //! x86-family CPU architecture (#kCPUArchitectureX86 or
+  //! #kCPUArchitectureX86_64).
+  //!
+  //! \return An x86 family-specific value identifying the CPU signature.
+  virtual uint32_t CPUX86Signature() = 0;
+
+  //! \brief Returns an x86-family snapshot system’s CPU features.
+  //!
+  //! This is the feature information as encoded in `cpuid 1` `edx` and `ecx`.
+  //! `edx` is placed in the low half of the return value, and `ecx` is placed
+  //! in the high half.
+  //!
+  //! This method must only be called when GetCPUArchitecture() indicates an
+  //! x86-family CPU architecture (#kCPUArchitectureX86 or
+  //! #kCPUArchitectureX86_64).
+  //!
+  //! \return An x86 family-specific value identifying CPU features.
+  //!
+  //! \sa CPUX86ExtendedFeatures()
+  //! \sa CPUX86Leaf7Features()
+  virtual uint64_t CPUX86Features() = 0;
+
+  //! \brief Returns an x86-family snapshot system’s extended CPU features.
+  //!
+  //! This is the extended feature information as encoded in `cpuid 0x80000001`
+  //! `edx` and `ecx`. `edx` is placed in the low half of the return value, and
+  //! `ecx` is placed in the high half.
+  //!
+  //! This method must only be called when GetCPUArchitecture() indicates an
+  //! x86-family CPU architecture (#kCPUArchitectureX86 or
+  //! #kCPUArchitectureX86_64).
+  //!
+  //! \return An x86 family-specific value identifying extended CPU features.
+  //!
+  //! \sa CPUX86Features()
+  //! \sa CPUX86Leaf7Features()
+  virtual uint64_t CPUX86ExtendedFeatures() = 0;
+
+  //! \brief Returns an x86-family snapshot system’s “leaf 7” CPU features.
+  //!
+  //! This is the “leaf 7” feature information as encoded in `cpuid 7` `ebx`. If
+  //! `cpuid 7` is not supported by the snapshot CPU, this returns `0`.
+  //!
+  //! This method must only be called when GetCPUArchitecture() indicates an
+  //! x86-family CPU architecture (#kCPUArchitectureX86 or
+  //! #kCPUArchitectureX86_64).
+  //!
+  //! \return An x86 family-specific value identifying “leaf 7” CPU features.
+  //!
+  //! \sa CPUX86Features()
+  //! \sa CPUX86ExtendedFeatures()
+  virtual uint32_t CPUX86Leaf7Features() = 0;
+
+  //! \brief Returns an x86-family snapshot system’s CPU’s support for the SSE
+  //!     DAZ (“denormals are zeros”) mode.
+  //!
+  //! This determines whether the CPU supports DAZ mode at all, not whether this
+  //! mode is enabled for any particular thread. DAZ mode support is detected by
+  //! examining the DAZ bit in the `mxcsr_mask` field of the floating-point
+  //! context saved by `fxsave`.
+  //!
+  //! This method must only be called when GetCPUArchitecture() indicates an
+  //! x86-family CPU architecture (#kCPUArchitectureX86 or
+  //! #kCPUArchitectureX86_64).
+  //!
+  //! \return `true` if the snapshot system’s CPUs support the SSE DAZ mode,
+  //!     `false` if they do not.
+  virtual bool CPUX86SupportsDAZ() = 0;
+
+  //! \brief Returns the snapshot system’s operating system family.
+  virtual OperatingSystem GetOperatingSystem() = 0;
+
+  //! \brief Returns whether the snapshot system runs a server variant of its
+  //!     operating system.
+  virtual bool OSServer() = 0;
+
+  //! \brief Returns the snapshot system’s operating system version information
+  //!     in \a major, \a minor, \a bugfix, and \a build.
+  //!
+  //! \param[out] major The snapshot system’s operating system’s first (major)
+  //!     version number component. This would be `10` for Mac OS X 10.9.5, and
+  //!     `6` for Windows 7 (NT 6.1) SP1 version 6.1.7601.
+  //! \param[out] minor The snapshot system’s operating system’s second (minor)
+  //!     version number component. This would be `9` for Mac OS X 10.9.5, and
+  //!     `1` for Windows 7 (NT 6.1) SP1 version 6.1.7601.
+  //! \param[out] bugfix The snapshot system’s operating system’s third (bugfix)
+  //!     version number component. This would be `5` for Mac OS X 10.9.5, and
+  //!     `7601` for Windows 7 (NT 6.1) SP1 version 6.1.7601.
+  //! \param[out] build A string further identifying an operating system
+  //!     version. For Mac OS X 10.9.5, this would be `"13F34"`. For Windows,
+  //!     this would be `"Service Pack 1"` if that service pack was installed.
+  //!     For Linux and other Unix-like systems, this would be the kernel
+  //!     version from `uname -srvm`, possibly with additional information
+  //!     appended. On Android, the `ro.build.fingerprint` system property would
+  //!     be appended.
+  virtual void OSVersion(int* major,
+                         int* minor,
+                         int* bugfix,
+                         std::string* build) = 0;
+
+  //! \brief Returns the snapshot system’s full operating system version
+  //!     information in string format.
+  //!
+  //! For Mac OS X, the string contains values from the operating system and
+  //! kernel. A Mac OS X 10.9.5 snapshot system would be identified as `"Mac OS
+  //! X 10.9.5 (13F34); Darwin 13.4.0 Darwin Kernel Version 13.4.0: Sun Aug 17
+  //! 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64 x86_64"`.
+  virtual std::string OSVersionFull() = 0;
+
+  //! \brief Returns a description of the snapshot system’s hardware in string
+  //!     format.
+  //!
+  //! For Mac OS X, the string contains the Mac model and board ID. A mid-2014
+  //! 15" MacBook Pro would be identified as `"MacBookPro11,3
+  //! (Mac-2BD1B31983FE1663)"`.
+  virtual std::string MachineDescription() = 0;
+
+  //! \brief Returns the status of the NX (no-execute, or XD, execute-disable)
+  //!     feature on the snapshot system.
+  //!
+  //! This refers to a feature that allows mapped readable pages to be marked
+  //! as non-executable.
+  //!
+  //! \return `true` if the snapshot system supports NX and it is enabled.
+  virtual bool NXEnabled() = 0;
+
+  //! \brief Returns time zone information from the snapshot system, based on
+  //!     its locale configuration and real-time clock.
+  //!
+  //! \param[out] dst_status Whether the location observes daylight saving time,
+  //!     and if so, whether it or standard time is currently being observed.
+  //! \param[out] standard_offset_seconds The number of seconds that the
+  //!     location’s time zone is east (ahead) of UTC during standard time.
+  //! \param[out] daylight_offset_seconds The number of seconds that the
+  //!     location’s time zone is east (ahead) of UTC during daylight saving.
+  //!     time.
+  //! \param[out] standard_name The name of the time zone while standard time is
+  //!     being observed.
+  //! \param[out] daylight_name The name of the time zone while daylight saving
+  //!     time is being observed.
+  virtual void TimeZone(DaylightSavingTimeStatus* observes_daylight,
+                        int* standard_offset_seconds,
+                        int* daylight_offset_seconds,
+                        std::string* standard_name,
+                        std::string* daylight_name) = 0;
+
+ protected:
+  ~SystemSnapshot() {}
+};
+
+}  // namespace crashpad
+
+#endif  // CRASHPAD_SNAPSHOT_SYSTEM_SNAPSHOT_H_