| Index: third_party/sqlite/preprocessed/sqlite3.h
|
| diff --git a/third_party/sqlite/preprocessed/sqlite3.h b/third_party/sqlite/preprocessed/sqlite3.h
|
| index b9452deb904b73010fdeb81f97126b39d8d025c4..7bf731ac74092d2764c0eff2d267929fb0a0ef16 100644
|
| --- a/third_party/sqlite/preprocessed/sqlite3.h
|
| +++ b/third_party/sqlite/preprocessed/sqlite3.h
|
| @@ -81,55 +81,43 @@ extern "C" {
|
| #endif
|
|
|
| /*
|
| -** CAPI3REF: Compile-Time Library Version Numbers {H10010} <S60100>
|
| -**
|
| -** The SQLITE_VERSION and SQLITE_VERSION_NUMBER #defines in
|
| -** the sqlite3.h file specify the version of SQLite with which
|
| -** that header file is associated.
|
| -**
|
| -** The "version" of SQLite is a string of the form "W.X.Y" or "W.X.Y.Z".
|
| -** The W value is major version number and is always 3 in SQLite3.
|
| -** The W value only changes when backwards compatibility is
|
| -** broken and we intend to never break backwards compatibility.
|
| -** The X value is the minor version number and only changes when
|
| -** there are major feature enhancements that are forwards compatible
|
| -** but not backwards compatible.
|
| -** The Y value is the release number and is incremented with
|
| -** each release but resets back to 0 whenever X is incremented.
|
| -** The Z value only appears on branch releases.
|
| -**
|
| -** The SQLITE_VERSION_NUMBER is an integer that is computed as
|
| -** follows:
|
| -**
|
| -** <blockquote><pre>
|
| -** SQLITE_VERSION_NUMBER = W*1000000 + X*1000 + Y
|
| -** </pre></blockquote>
|
| +** CAPI3REF: Compile-Time Library Version Numbers
|
| +**
|
| +** ^(The [SQLITE_VERSION] C preprocessor macro in the sqlite3.h header
|
| +** evaluates to a string literal that is the SQLite version in the
|
| +** format "X.Y.Z" where X is the major version number (always 3 for
|
| +** SQLite3) and Y is the minor version number and Z is the release number.)^
|
| +** ^(The [SQLITE_VERSION_NUMBER] C preprocessor macro resolves to an integer
|
| +** with the value (X*1000000 + Y*1000 + Z) where X, Y, and Z are the same
|
| +** numbers used in [SQLITE_VERSION].)^
|
| +** The SQLITE_VERSION_NUMBER for any given release of SQLite will also
|
| +** be larger than the release from which it is derived. Either Y will
|
| +** be held constant and Z will be incremented or else Y will be incremented
|
| +** and Z will be reset to zero.
|
| **
|
| ** Since version 3.6.18, SQLite source code has been stored in the
|
| -** <a href="http://www.fossil-scm.org/">fossil configuration management
|
| -** system</a>. The SQLITE_SOURCE_ID
|
| -** macro is a string which identifies a particular check-in of SQLite
|
| -** within its configuration management system. The string contains the
|
| -** date and time of the check-in (UTC) and an SHA1 hash of the entire
|
| -** source tree.
|
| +** <a href="http://www.fossil-scm.org/">Fossil configuration management
|
| +** system</a>. ^The SQLITE_SOURCE_ID macro evaluates to
|
| +** a string which identifies a particular check-in of SQLite
|
| +** within its configuration management system. ^The SQLITE_SOURCE_ID
|
| +** string contains the date and time of the check-in (UTC) and an SHA1
|
| +** hash of the entire source tree.
|
| **
|
| ** See also: [sqlite3_libversion()],
|
| ** [sqlite3_libversion_number()], [sqlite3_sourceid()],
|
| ** [sqlite_version()] and [sqlite_source_id()].
|
| -**
|
| -** Requirements: [H10011] [H10014]
|
| */
|
| -#define SQLITE_VERSION "3.6.18"
|
| -#define SQLITE_VERSION_NUMBER 3006018
|
| -#define SQLITE_SOURCE_ID "2009-09-11 14:05:07 b084828a771ec40be85f07c590ca99de4f6c24ee"
|
| +#define SQLITE_VERSION "3.7.3"
|
| +#define SQLITE_VERSION_NUMBER 3007003
|
| +#define SQLITE_SOURCE_ID "2010-10-08 02:34:02 2677848087c9c090efb17c1893e77d6136a9111d"
|
|
|
| /*
|
| -** CAPI3REF: Run-Time Library Version Numbers {H10020} <S60100>
|
| -** KEYWORDS: sqlite3_version
|
| +** CAPI3REF: Run-Time Library Version Numbers
|
| +** KEYWORDS: sqlite3_version, sqlite3_sourceid
|
| **
|
| ** These interfaces provide the same information as the [SQLITE_VERSION],
|
| -** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] #defines in the header,
|
| -** but are associated with the library instead of the header file. Cautious
|
| +** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros
|
| +** but are associated with the library instead of the header file. ^(Cautious
|
| ** programmers might include assert() statements in their application to
|
| ** verify that values returned by these interfaces match the macros in
|
| ** the header, and thus insure that the application is
|
| @@ -138,19 +126,20 @@ extern "C" {
|
| ** <blockquote><pre>
|
| ** assert( sqlite3_libversion_number()==SQLITE_VERSION_NUMBER );
|
| ** assert( strcmp(sqlite3_sourceid(),SQLITE_SOURCE_ID)==0 );
|
| -** assert( strcmp(sqlite3_libversion,SQLITE_VERSION)==0 );
|
| -** </pre></blockquote>
|
| -**
|
| -** The sqlite3_libversion() function returns the same information as is
|
| -** in the sqlite3_version[] string constant. The function is provided
|
| -** for use in DLLs since DLL users usually do not have direct access to string
|
| -** constants within the DLL. Similarly, the sqlite3_sourceid() function
|
| -** returns the same information as is in the [SQLITE_SOURCE_ID] #define of
|
| -** the header file.
|
| +** assert( strcmp(sqlite3_libversion(),SQLITE_VERSION)==0 );
|
| +** </pre></blockquote>)^
|
| +**
|
| +** ^The sqlite3_version[] string constant contains the text of [SQLITE_VERSION]
|
| +** macro. ^The sqlite3_libversion() function returns a pointer to the
|
| +** to the sqlite3_version[] string constant. The sqlite3_libversion()
|
| +** function is provided for use in DLLs since DLL users usually do not have
|
| +** direct access to string constants within the DLL. ^The
|
| +** sqlite3_libversion_number() function returns an integer equal to
|
| +** [SQLITE_VERSION_NUMBER]. ^The sqlite3_sourceid() function returns
|
| +** a pointer to a string constant whose value is the same as the
|
| +** [SQLITE_SOURCE_ID] C preprocessor macro.
|
| **
|
| ** See also: [sqlite_version()] and [sqlite_source_id()].
|
| -**
|
| -** Requirements: [H10021] [H10022] [H10023]
|
| */
|
| SQLITE_API SQLITE_EXTERN const char sqlite3_version[];
|
| SQLITE_API const char *sqlite3_libversion(void);
|
| @@ -158,7 +147,38 @@ SQLITE_API const char *sqlite3_sourceid(void);
|
| SQLITE_API int sqlite3_libversion_number(void);
|
|
|
| /*
|
| -** CAPI3REF: Test To See If The Library Is Threadsafe {H10100} <S60100>
|
| +** CAPI3REF: Run-Time Library Compilation Options Diagnostics
|
| +**
|
| +** ^The sqlite3_compileoption_used() function returns 0 or 1
|
| +** indicating whether the specified option was defined at
|
| +** compile time. ^The SQLITE_ prefix may be omitted from the
|
| +** option name passed to sqlite3_compileoption_used().
|
| +**
|
| +** ^The sqlite3_compileoption_get() function allows iterating
|
| +** over the list of options that were defined at compile time by
|
| +** returning the N-th compile time option string. ^If N is out of range,
|
| +** sqlite3_compileoption_get() returns a NULL pointer. ^The SQLITE_
|
| +** prefix is omitted from any strings returned by
|
| +** sqlite3_compileoption_get().
|
| +**
|
| +** ^Support for the diagnostic functions sqlite3_compileoption_used()
|
| +** and sqlite3_compileoption_get() may be omitted by specifying the
|
| +** [SQLITE_OMIT_COMPILEOPTION_DIAGS] option at compile time.
|
| +**
|
| +** See also: SQL functions [sqlite_compileoption_used()] and
|
| +** [sqlite_compileoption_get()] and the [compile_options pragma].
|
| +*/
|
| +#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS
|
| +SQLITE_API int sqlite3_compileoption_used(const char *zOptName);
|
| +SQLITE_API const char *sqlite3_compileoption_get(int N);
|
| +#endif
|
| +
|
| +/*
|
| +** CAPI3REF: Test To See If The Library Is Threadsafe
|
| +**
|
| +** ^The sqlite3_threadsafe() function returns zero if and only if
|
| +** SQLite was compiled mutexing code omitted due to the
|
| +** [SQLITE_THREADSAFE] compile-time option being set to 0.
|
| **
|
| ** SQLite can be compiled with or without mutexes. When
|
| ** the [SQLITE_THREADSAFE] C preprocessor macro is 1 or 2, mutexes
|
| @@ -170,7 +190,7 @@ SQLITE_API int sqlite3_libversion_number(void);
|
| ** Enabling mutexes incurs a measurable performance penalty.
|
| ** So if speed is of utmost importance, it makes sense to disable
|
| ** the mutexes. But for maximum safety, mutexes should be enabled.
|
| -** The default behavior is for mutexes to be enabled.
|
| +** ^The default behavior is for mutexes to be enabled.
|
| **
|
| ** This interface can be used by an application to make sure that the
|
| ** version of SQLite that it is linking against was compiled with
|
| @@ -178,21 +198,21 @@ SQLITE_API int sqlite3_libversion_number(void);
|
| **
|
| ** This interface only reports on the compile-time mutex setting
|
| ** of the [SQLITE_THREADSAFE] flag. If SQLite is compiled with
|
| -** SQLITE_THREADSAFE=1 then mutexes are enabled by default but
|
| +** SQLITE_THREADSAFE=1 or =2 then mutexes are enabled by default but
|
| ** can be fully or partially disabled using a call to [sqlite3_config()]
|
| ** with the verbs [SQLITE_CONFIG_SINGLETHREAD], [SQLITE_CONFIG_MULTITHREAD],
|
| -** or [SQLITE_CONFIG_MUTEX]. The return value of this function shows
|
| -** only the default compile-time setting, not any run-time changes
|
| -** to that setting.
|
| +** or [SQLITE_CONFIG_MUTEX]. ^(The return value of the
|
| +** sqlite3_threadsafe() function shows only the compile-time setting of
|
| +** thread safety, not any run-time changes to that setting made by
|
| +** sqlite3_config(). In other words, the return value from sqlite3_threadsafe()
|
| +** is unchanged by calls to sqlite3_config().)^
|
| **
|
| ** See the [threading mode] documentation for additional information.
|
| -**
|
| -** Requirements: [H10101] [H10102]
|
| */
|
| SQLITE_API int sqlite3_threadsafe(void);
|
|
|
| /*
|
| -** CAPI3REF: Database Connection Handle {H12000} <S40200>
|
| +** CAPI3REF: Database Connection Handle
|
| ** KEYWORDS: {database connection} {database connections}
|
| **
|
| ** Each open SQLite database is represented by a pointer to an instance of
|
| @@ -207,7 +227,7 @@ SQLITE_API int sqlite3_threadsafe(void);
|
| typedef struct sqlite3 sqlite3;
|
|
|
| /*
|
| -** CAPI3REF: 64-Bit Integer Types {H10200} <S10110>
|
| +** CAPI3REF: 64-Bit Integer Types
|
| ** KEYWORDS: sqlite_int64 sqlite_uint64
|
| **
|
| ** Because there is no cross-platform way to specify 64-bit integer types
|
| @@ -217,7 +237,10 @@ typedef struct sqlite3 sqlite3;
|
| ** The sqlite_int64 and sqlite_uint64 types are supported for backwards
|
| ** compatibility only.
|
| **
|
| -** Requirements: [H10201] [H10202]
|
| +** ^The sqlite3_int64 and sqlite_int64 types can store integer values
|
| +** between -9223372036854775808 and +9223372036854775807 inclusive. ^The
|
| +** sqlite3_uint64 and sqlite_uint64 types can store integer values
|
| +** between 0 and +18446744073709551615 inclusive.
|
| */
|
| #ifdef SQLITE_INT64_TYPE
|
| typedef SQLITE_INT64_TYPE sqlite_int64;
|
| @@ -241,34 +264,28 @@ typedef sqlite_uint64 sqlite3_uint64;
|
| #endif
|
|
|
| /*
|
| -** CAPI3REF: Closing A Database Connection {H12010} <S30100><S40200>
|
| +** CAPI3REF: Closing A Database Connection
|
| **
|
| -** This routine is the destructor for the [sqlite3] object.
|
| +** ^The sqlite3_close() routine is the destructor for the [sqlite3] object.
|
| +** ^Calls to sqlite3_close() return SQLITE_OK if the [sqlite3] object is
|
| +** successfully destroyed and all associated resources are deallocated.
|
| **
|
| -** Applications should [sqlite3_finalize | finalize] all [prepared statements]
|
| +** Applications must [sqlite3_finalize | finalize] all [prepared statements]
|
| ** and [sqlite3_blob_close | close] all [BLOB handles] associated with
|
| -** the [sqlite3] object prior to attempting to close the object.
|
| -** The [sqlite3_next_stmt()] interface can be used to locate all
|
| -** [prepared statements] associated with a [database connection] if desired.
|
| -** Typical code might look like this:
|
| -**
|
| -** <blockquote><pre>
|
| -** sqlite3_stmt *pStmt;
|
| -** while( (pStmt = sqlite3_next_stmt(db, 0))!=0 ){
|
| -** sqlite3_finalize(pStmt);
|
| -** }
|
| -** </pre></blockquote>
|
| +** the [sqlite3] object prior to attempting to close the object. ^If
|
| +** sqlite3_close() is called on a [database connection] that still has
|
| +** outstanding [prepared statements] or [BLOB handles], then it returns
|
| +** SQLITE_BUSY.
|
| **
|
| -** If [sqlite3_close()] is invoked while a transaction is open,
|
| +** ^If [sqlite3_close()] is invoked while a transaction is open,
|
| ** the transaction is automatically rolled back.
|
| **
|
| ** The C parameter to [sqlite3_close(C)] must be either a NULL
|
| ** pointer or an [sqlite3] object pointer obtained
|
| ** from [sqlite3_open()], [sqlite3_open16()], or
|
| ** [sqlite3_open_v2()], and not previously closed.
|
| -**
|
| -** Requirements:
|
| -** [H12011] [H12012] [H12013] [H12014] [H12015] [H12019]
|
| +** ^Calling sqlite3_close() with a NULL pointer argument is a
|
| +** harmless no-op.
|
| */
|
| SQLITE_API int sqlite3_close(sqlite3 *);
|
|
|
| @@ -280,48 +297,65 @@ SQLITE_API int sqlite3_close(sqlite3 *);
|
| typedef int (*sqlite3_callback)(void*,int,char**, char**);
|
|
|
| /*
|
| -** CAPI3REF: One-Step Query Execution Interface {H12100} <S10000>
|
| -**
|
| -** The sqlite3_exec() interface is a convenient way of running one or more
|
| -** SQL statements without having to write a lot of C code. The UTF-8 encoded
|
| -** SQL statements are passed in as the second parameter to sqlite3_exec().
|
| -** The statements are evaluated one by one until either an error or
|
| -** an interrupt is encountered, or until they are all done. The 3rd parameter
|
| -** is an optional callback that is invoked once for each row of any query
|
| -** results produced by the SQL statements. The 5th parameter tells where
|
| -** to write any error messages.
|
| -**
|
| -** The error message passed back through the 5th parameter is held
|
| -** in memory obtained from [sqlite3_malloc()]. To avoid a memory leak,
|
| -** the calling application should call [sqlite3_free()] on any error
|
| -** message returned through the 5th parameter when it has finished using
|
| -** the error message.
|
| -**
|
| -** If the SQL statement in the 2nd parameter is NULL or an empty string
|
| -** or a string containing only whitespace and comments, then no SQL
|
| -** statements are evaluated and the database is not changed.
|
| -**
|
| -** The sqlite3_exec() interface is implemented in terms of
|
| -** [sqlite3_prepare_v2()], [sqlite3_step()], and [sqlite3_finalize()].
|
| -** The sqlite3_exec() routine does nothing to the database that cannot be done
|
| -** by [sqlite3_prepare_v2()], [sqlite3_step()], and [sqlite3_finalize()].
|
| +** CAPI3REF: One-Step Query Execution Interface
|
| +**
|
| +** The sqlite3_exec() interface is a convenience wrapper around
|
| +** [sqlite3_prepare_v2()], [sqlite3_step()], and [sqlite3_finalize()],
|
| +** that allows an application to run multiple statements of SQL
|
| +** without having to use a lot of C code.
|
| +**
|
| +** ^The sqlite3_exec() interface runs zero or more UTF-8 encoded,
|
| +** semicolon-separate SQL statements passed into its 2nd argument,
|
| +** in the context of the [database connection] passed in as its 1st
|
| +** argument. ^If the callback function of the 3rd argument to
|
| +** sqlite3_exec() is not NULL, then it is invoked for each result row
|
| +** coming out of the evaluated SQL statements. ^The 4th argument to
|
| +** to sqlite3_exec() is relayed through to the 1st argument of each
|
| +** callback invocation. ^If the callback pointer to sqlite3_exec()
|
| +** is NULL, then no callback is ever invoked and result rows are
|
| +** ignored.
|
| +**
|
| +** ^If an error occurs while evaluating the SQL statements passed into
|
| +** sqlite3_exec(), then execution of the current statement stops and
|
| +** subsequent statements are skipped. ^If the 5th parameter to sqlite3_exec()
|
| +** is not NULL then any error message is written into memory obtained
|
| +** from [sqlite3_malloc()] and passed back through the 5th parameter.
|
| +** To avoid memory leaks, the application should invoke [sqlite3_free()]
|
| +** on error message strings returned through the 5th parameter of
|
| +** of sqlite3_exec() after the error message string is no longer needed.
|
| +** ^If the 5th parameter to sqlite3_exec() is not NULL and no errors
|
| +** occur, then sqlite3_exec() sets the pointer in its 5th parameter to
|
| +** NULL before returning.
|
| +**
|
| +** ^If an sqlite3_exec() callback returns non-zero, the sqlite3_exec()
|
| +** routine returns SQLITE_ABORT without invoking the callback again and
|
| +** without running any subsequent SQL statements.
|
| +**
|
| +** ^The 2nd argument to the sqlite3_exec() callback function is the
|
| +** number of columns in the result. ^The 3rd argument to the sqlite3_exec()
|
| +** callback is an array of pointers to strings obtained as if from
|
| +** [sqlite3_column_text()], one for each column. ^If an element of a
|
| +** result row is NULL then the corresponding string pointer for the
|
| +** sqlite3_exec() callback is a NULL pointer. ^The 4th argument to the
|
| +** sqlite3_exec() callback is an array of pointers to strings where each
|
| +** entry represents the name of corresponding result column as obtained
|
| +** from [sqlite3_column_name()].
|
| +**
|
| +** ^If the 2nd parameter to sqlite3_exec() is a NULL pointer, a pointer
|
| +** to an empty string, or a pointer that contains only whitespace and/or
|
| +** SQL comments, then no SQL statements are evaluated and the database
|
| +** is not changed.
|
| +**
|
| +** Restrictions:
|
| **
|
| -** The first parameter to [sqlite3_exec()] must be an valid and open
|
| -** [database connection].
|
| -**
|
| -** The database connection must not be closed while
|
| -** [sqlite3_exec()] is running.
|
| -**
|
| -** The calling function should use [sqlite3_free()] to free
|
| -** the memory that *errmsg is left pointing at once the error
|
| -** message is no longer needed.
|
| -**
|
| -** The SQL statement text in the 2nd parameter to [sqlite3_exec()]
|
| -** must remain unchanged while [sqlite3_exec()] is running.
|
| -**
|
| -** Requirements:
|
| -** [H12101] [H12102] [H12104] [H12105] [H12107] [H12110] [H12113] [H12116]
|
| -** [H12119] [H12122] [H12125] [H12131] [H12134] [H12137] [H12138]
|
| +** <ul>
|
| +** <li> The application must insure that the 1st parameter to sqlite3_exec()
|
| +** is a valid and open [database connection].
|
| +** <li> The application must not close [database connection] specified by
|
| +** the 1st parameter to sqlite3_exec() while sqlite3_exec() is running.
|
| +** <li> The application must not modify the SQL statement text passed into
|
| +** the 2nd parameter of sqlite3_exec() while sqlite3_exec() is running.
|
| +** </ul>
|
| */
|
| SQLITE_API int sqlite3_exec(
|
| sqlite3*, /* An open database */
|
| @@ -332,7 +366,7 @@ SQLITE_API int sqlite3_exec(
|
| );
|
|
|
| /*
|
| -** CAPI3REF: Result Codes {H10210} <S10700>
|
| +** CAPI3REF: Result Codes
|
| ** KEYWORDS: SQLITE_OK {error code} {error codes}
|
| ** KEYWORDS: {result code} {result codes}
|
| **
|
| @@ -359,7 +393,7 @@ SQLITE_API int sqlite3_exec(
|
| #define SQLITE_NOTFOUND 12 /* NOT USED. Table or record not found */
|
| #define SQLITE_FULL 13 /* Insertion failed because database is full */
|
| #define SQLITE_CANTOPEN 14 /* Unable to open the database file */
|
| -#define SQLITE_PROTOCOL 15 /* NOT USED. Database lock protocol error */
|
| +#define SQLITE_PROTOCOL 15 /* Database lock protocol error */
|
| #define SQLITE_EMPTY 16 /* Database is empty */
|
| #define SQLITE_SCHEMA 17 /* The database schema changed */
|
| #define SQLITE_TOOBIG 18 /* String or BLOB exceeds size limit */
|
| @@ -376,7 +410,7 @@ SQLITE_API int sqlite3_exec(
|
| /* end-of-error-codes */
|
|
|
| /*
|
| -** CAPI3REF: Extended Result Codes {H10220} <S10700>
|
| +** CAPI3REF: Extended Result Codes
|
| ** KEYWORDS: {extended error code} {extended error codes}
|
| ** KEYWORDS: {extended result code} {extended result codes}
|
| **
|
| @@ -415,10 +449,15 @@ SQLITE_API int sqlite3_exec(
|
| #define SQLITE_IOERR_LOCK (SQLITE_IOERR | (15<<8))
|
| #define SQLITE_IOERR_CLOSE (SQLITE_IOERR | (16<<8))
|
| #define SQLITE_IOERR_DIR_CLOSE (SQLITE_IOERR | (17<<8))
|
| -#define SQLITE_LOCKED_SHAREDCACHE (SQLITE_LOCKED | (1<<8) )
|
| +#define SQLITE_IOERR_SHMOPEN (SQLITE_IOERR | (18<<8))
|
| +#define SQLITE_IOERR_SHMSIZE (SQLITE_IOERR | (19<<8))
|
| +#define SQLITE_IOERR_SHMLOCK (SQLITE_IOERR | (20<<8))
|
| +#define SQLITE_LOCKED_SHAREDCACHE (SQLITE_LOCKED | (1<<8))
|
| +#define SQLITE_BUSY_RECOVERY (SQLITE_BUSY | (1<<8))
|
| +#define SQLITE_CANTOPEN_NOTEMPDIR (SQLITE_CANTOPEN | (1<<8))
|
|
|
| /*
|
| -** CAPI3REF: Flags For File Open Operations {H10230} <H11120> <H12700>
|
| +** CAPI3REF: Flags For File Open Operations
|
| **
|
| ** These bit values are intended for use in the
|
| ** 3rd parameter to the [sqlite3_open_v2()] interface and
|
| @@ -430,6 +469,7 @@ SQLITE_API int sqlite3_exec(
|
| #define SQLITE_OPEN_CREATE 0x00000004 /* Ok for sqlite3_open_v2() */
|
| #define SQLITE_OPEN_DELETEONCLOSE 0x00000008 /* VFS only */
|
| #define SQLITE_OPEN_EXCLUSIVE 0x00000010 /* VFS only */
|
| +#define SQLITE_OPEN_AUTOPROXY 0x00000020 /* VFS only */
|
| #define SQLITE_OPEN_MAIN_DB 0x00000100 /* VFS only */
|
| #define SQLITE_OPEN_TEMP_DB 0x00000200 /* VFS only */
|
| #define SQLITE_OPEN_TRANSIENT_DB 0x00000400 /* VFS only */
|
| @@ -441,11 +481,12 @@ SQLITE_API int sqlite3_exec(
|
| #define SQLITE_OPEN_FULLMUTEX 0x00010000 /* Ok for sqlite3_open_v2() */
|
| #define SQLITE_OPEN_SHAREDCACHE 0x00020000 /* Ok for sqlite3_open_v2() */
|
| #define SQLITE_OPEN_PRIVATECACHE 0x00040000 /* Ok for sqlite3_open_v2() */
|
| +#define SQLITE_OPEN_WAL 0x00080000 /* VFS only */
|
|
|
| /*
|
| -** CAPI3REF: Device Characteristics {H10240} <H11120>
|
| +** CAPI3REF: Device Characteristics
|
| **
|
| -** The xDeviceCapabilities method of the [sqlite3_io_methods]
|
| +** The xDeviceCharacteristics method of the [sqlite3_io_methods]
|
| ** object returns an integer which is a vector of the these
|
| ** bit values expressing I/O characteristics of the mass storage
|
| ** device that holds the file that the [sqlite3_io_methods]
|
| @@ -462,20 +503,21 @@ SQLITE_API int sqlite3_exec(
|
| ** information is written to disk in the same order as calls
|
| ** to xWrite().
|
| */
|
| -#define SQLITE_IOCAP_ATOMIC 0x00000001
|
| -#define SQLITE_IOCAP_ATOMIC512 0x00000002
|
| -#define SQLITE_IOCAP_ATOMIC1K 0x00000004
|
| -#define SQLITE_IOCAP_ATOMIC2K 0x00000008
|
| -#define SQLITE_IOCAP_ATOMIC4K 0x00000010
|
| -#define SQLITE_IOCAP_ATOMIC8K 0x00000020
|
| -#define SQLITE_IOCAP_ATOMIC16K 0x00000040
|
| -#define SQLITE_IOCAP_ATOMIC32K 0x00000080
|
| -#define SQLITE_IOCAP_ATOMIC64K 0x00000100
|
| -#define SQLITE_IOCAP_SAFE_APPEND 0x00000200
|
| -#define SQLITE_IOCAP_SEQUENTIAL 0x00000400
|
| +#define SQLITE_IOCAP_ATOMIC 0x00000001
|
| +#define SQLITE_IOCAP_ATOMIC512 0x00000002
|
| +#define SQLITE_IOCAP_ATOMIC1K 0x00000004
|
| +#define SQLITE_IOCAP_ATOMIC2K 0x00000008
|
| +#define SQLITE_IOCAP_ATOMIC4K 0x00000010
|
| +#define SQLITE_IOCAP_ATOMIC8K 0x00000020
|
| +#define SQLITE_IOCAP_ATOMIC16K 0x00000040
|
| +#define SQLITE_IOCAP_ATOMIC32K 0x00000080
|
| +#define SQLITE_IOCAP_ATOMIC64K 0x00000100
|
| +#define SQLITE_IOCAP_SAFE_APPEND 0x00000200
|
| +#define SQLITE_IOCAP_SEQUENTIAL 0x00000400
|
| +#define SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN 0x00000800
|
|
|
| /*
|
| -** CAPI3REF: File Locking Levels {H10250} <H11120> <H11310>
|
| +** CAPI3REF: File Locking Levels
|
| **
|
| ** SQLite uses one of these integer values as the second
|
| ** argument to calls it makes to the xLock() and xUnlock() methods
|
| @@ -488,7 +530,7 @@ SQLITE_API int sqlite3_exec(
|
| #define SQLITE_LOCK_EXCLUSIVE 4
|
|
|
| /*
|
| -** CAPI3REF: Synchronization Type Flags {H10260} <H11120>
|
| +** CAPI3REF: Synchronization Type Flags
|
| **
|
| ** When SQLite invokes the xSync() method of an
|
| ** [sqlite3_io_methods] object it uses a combination of
|
| @@ -506,7 +548,7 @@ SQLITE_API int sqlite3_exec(
|
| #define SQLITE_SYNC_DATAONLY 0x00010
|
|
|
| /*
|
| -** CAPI3REF: OS Interface Open File Handle {H11110} <S20110>
|
| +** CAPI3REF: OS Interface Open File Handle
|
| **
|
| ** An [sqlite3_file] object represents an open file in the
|
| ** [sqlite3_vfs | OS interface layer]. Individual OS interface
|
| @@ -522,7 +564,7 @@ struct sqlite3_file {
|
| };
|
|
|
| /*
|
| -** CAPI3REF: OS Interface File Virtual Methods Object {H11120} <S20110>
|
| +** CAPI3REF: OS Interface File Virtual Methods Object
|
| **
|
| ** Every file opened by the [sqlite3_vfs] xOpen method populates an
|
| ** [sqlite3_file] object (or, more commonly, a subclass of the
|
| @@ -623,11 +665,17 @@ struct sqlite3_io_methods {
|
| int (*xFileControl)(sqlite3_file*, int op, void *pArg);
|
| int (*xSectorSize)(sqlite3_file*);
|
| int (*xDeviceCharacteristics)(sqlite3_file*);
|
| + /* Methods above are valid for version 1 */
|
| + int (*xShmMap)(sqlite3_file*, int iPg, int pgsz, int, void volatile**);
|
| + int (*xShmLock)(sqlite3_file*, int offset, int n, int flags);
|
| + void (*xShmBarrier)(sqlite3_file*);
|
| + int (*xShmUnmap)(sqlite3_file*, int deleteFlag);
|
| + /* Methods above are valid for version 2 */
|
| /* Additional methods may be added in future releases */
|
| };
|
|
|
| /*
|
| -** CAPI3REF: Standard File Control Opcodes {H11310} <S30800>
|
| +** CAPI3REF: Standard File Control Opcodes
|
| **
|
| ** These integer constants are opcodes for the xFileControl method
|
| ** of the [sqlite3_io_methods] object and for the [sqlite3_file_control()]
|
| @@ -640,14 +688,31 @@ struct sqlite3_io_methods {
|
| ** into an integer that the pArg argument points to. This capability
|
| ** is used during testing and only needs to be supported when SQLITE_TEST
|
| ** is defined.
|
| +**
|
| +** The [SQLITE_FCNTL_SIZE_HINT] opcode is used by SQLite to give the VFS
|
| +** layer a hint of how large the database file will grow to be during the
|
| +** current transaction. This hint is not guaranteed to be accurate but it
|
| +** is often close. The underlying VFS might choose to preallocate database
|
| +** file space based on this hint in order to help writes to the database
|
| +** file run faster.
|
| +**
|
| +** The [SQLITE_FCNTL_CHUNK_SIZE] opcode is used to request that the VFS
|
| +** extends and truncates the database file in chunks of a size specified
|
| +** by the user. The fourth argument to [sqlite3_file_control()] should
|
| +** point to an integer (type int) containing the new chunk-size to use
|
| +** for the nominated database. Allocating database file space in large
|
| +** chunks (say 1MB at a time), may reduce file-system fragmentation and
|
| +** improve performance on some systems.
|
| */
|
| #define SQLITE_FCNTL_LOCKSTATE 1
|
| #define SQLITE_GET_LOCKPROXYFILE 2
|
| #define SQLITE_SET_LOCKPROXYFILE 3
|
| #define SQLITE_LAST_ERRNO 4
|
| +#define SQLITE_FCNTL_SIZE_HINT 5
|
| +#define SQLITE_FCNTL_CHUNK_SIZE 6
|
|
|
| /*
|
| -** CAPI3REF: Mutex Handle {H17110} <S20130>
|
| +** CAPI3REF: Mutex Handle
|
| **
|
| ** The mutex module within SQLite defines [sqlite3_mutex] to be an
|
| ** abstract type for a mutex object. The SQLite core never looks
|
| @@ -659,7 +724,7 @@ struct sqlite3_io_methods {
|
| typedef struct sqlite3_mutex sqlite3_mutex;
|
|
|
| /*
|
| -** CAPI3REF: OS Interface Object {H11140} <S20100>
|
| +** CAPI3REF: OS Interface Object
|
| **
|
| ** An instance of the sqlite3_vfs object defines the interface between
|
| ** the SQLite core and the underlying operating system. The "vfs"
|
| @@ -692,15 +757,19 @@ typedef struct sqlite3_mutex sqlite3_mutex;
|
| ** The zName field holds the name of the VFS module. The name must
|
| ** be unique across all VFS modules.
|
| **
|
| -** SQLite will guarantee that the zFilename parameter to xOpen
|
| +** ^SQLite guarantees that the zFilename parameter to xOpen
|
| ** is either a NULL pointer or string obtained
|
| -** from xFullPathname(). SQLite further guarantees that
|
| +** from xFullPathname() with an optional suffix added.
|
| +** ^If a suffix is added to the zFilename parameter, it will
|
| +** consist of a single "-" character followed by no more than
|
| +** 10 alphanumeric and/or "-" characters.
|
| +** ^SQLite further guarantees that
|
| ** the string will be valid and unchanged until xClose() is
|
| ** called. Because of the previous sentence,
|
| ** the [sqlite3_file] can safely store a pointer to the
|
| ** filename if it needs to remember the filename for some reason.
|
| -** If the zFilename parameter is xOpen is a NULL pointer then xOpen
|
| -** must invent its own temporary name for the file. Whenever the
|
| +** If the zFilename parameter to xOpen is a NULL pointer then xOpen
|
| +** must invent its own temporary name for the file. ^Whenever the
|
| ** xFilename parameter is NULL it will also be the case that the
|
| ** flags parameter will include [SQLITE_OPEN_DELETEONCLOSE].
|
| **
|
| @@ -711,7 +780,7 @@ typedef struct sqlite3_mutex sqlite3_mutex;
|
| ** If xOpen() opens a file read-only then it sets *pOutFlags to
|
| ** include [SQLITE_OPEN_READONLY]. Other bits in *pOutFlags may be set.
|
| **
|
| -** SQLite will also add one of the following flags to the xOpen()
|
| +** ^(SQLite will also add one of the following flags to the xOpen()
|
| ** call, depending on the object being opened:
|
| **
|
| ** <ul>
|
| @@ -722,7 +791,8 @@ typedef struct sqlite3_mutex sqlite3_mutex;
|
| ** <li> [SQLITE_OPEN_TRANSIENT_DB]
|
| ** <li> [SQLITE_OPEN_SUBJOURNAL]
|
| ** <li> [SQLITE_OPEN_MASTER_JOURNAL]
|
| -** </ul>
|
| +** <li> [SQLITE_OPEN_WAL]
|
| +** </ul>)^
|
| **
|
| ** The file I/O implementation can use the object type flags to
|
| ** change the way it deals with files. For example, an application
|
| @@ -741,10 +811,11 @@ typedef struct sqlite3_mutex sqlite3_mutex;
|
| ** </ul>
|
| **
|
| ** The [SQLITE_OPEN_DELETEONCLOSE] flag means the file should be
|
| -** deleted when it is closed. The [SQLITE_OPEN_DELETEONCLOSE]
|
| -** will be set for TEMP databases, journals and for subjournals.
|
| +** deleted when it is closed. ^The [SQLITE_OPEN_DELETEONCLOSE]
|
| +** will be set for TEMP databases and their journals, transient
|
| +** databases, and subjournals.
|
| **
|
| -** The [SQLITE_OPEN_EXCLUSIVE] flag is always used in conjunction
|
| +** ^The [SQLITE_OPEN_EXCLUSIVE] flag is always used in conjunction
|
| ** with the [SQLITE_OPEN_CREATE] flag, which are both directly
|
| ** analogous to the O_EXCL and O_CREAT flags of the POSIX open()
|
| ** API. The SQLITE_OPEN_EXCLUSIVE flag, when paired with the
|
| @@ -753,7 +824,7 @@ typedef struct sqlite3_mutex sqlite3_mutex;
|
| ** It is <i>not</i> used to indicate the file should be opened
|
| ** for exclusive access.
|
| **
|
| -** At least szOsFile bytes of memory are allocated by SQLite
|
| +** ^At least szOsFile bytes of memory are allocated by SQLite
|
| ** to hold the [sqlite3_file] structure passed as the third
|
| ** argument to xOpen. The xOpen method does not have to
|
| ** allocate the structure; it should just fill it in. Note that
|
| @@ -763,33 +834,40 @@ typedef struct sqlite3_mutex sqlite3_mutex;
|
| ** element will be valid after xOpen returns regardless of the success
|
| ** or failure of the xOpen call.
|
| **
|
| -** The flags argument to xAccess() may be [SQLITE_ACCESS_EXISTS]
|
| +** ^The flags argument to xAccess() may be [SQLITE_ACCESS_EXISTS]
|
| ** to test for the existence of a file, or [SQLITE_ACCESS_READWRITE] to
|
| ** test whether a file is readable and writable, or [SQLITE_ACCESS_READ]
|
| ** to test whether a file is at least readable. The file can be a
|
| ** directory.
|
| **
|
| -** SQLite will always allocate at least mxPathname+1 bytes for the
|
| +** ^SQLite will always allocate at least mxPathname+1 bytes for the
|
| ** output buffer xFullPathname. The exact size of the output buffer
|
| ** is also passed as a parameter to both methods. If the output buffer
|
| ** is not large enough, [SQLITE_CANTOPEN] should be returned. Since this is
|
| ** handled as a fatal error by SQLite, vfs implementations should endeavor
|
| ** to prevent this by setting mxPathname to a sufficiently large value.
|
| **
|
| -** The xRandomness(), xSleep(), and xCurrentTime() interfaces
|
| -** are not strictly a part of the filesystem, but they are
|
| +** The xRandomness(), xSleep(), xCurrentTime(), and xCurrentTimeInt64()
|
| +** interfaces are not strictly a part of the filesystem, but they are
|
| ** included in the VFS structure for completeness.
|
| ** The xRandomness() function attempts to return nBytes bytes
|
| ** of good-quality randomness into zOut. The return value is
|
| ** the actual number of bytes of randomness obtained.
|
| ** The xSleep() method causes the calling thread to sleep for at
|
| -** least the number of microseconds given. The xCurrentTime()
|
| -** method returns a Julian Day Number for the current date and time.
|
| -**
|
| +** least the number of microseconds given. ^The xCurrentTime()
|
| +** method returns a Julian Day Number for the current date and time as
|
| +** a floating point value.
|
| +** ^The xCurrentTimeInt64() method returns, as an integer, the Julian
|
| +** Day Number multipled by 86400000 (the number of milliseconds in
|
| +** a 24-hour day).
|
| +** ^SQLite will use the xCurrentTimeInt64() method to get the current
|
| +** date and time if that method is available (if iVersion is 2 or
|
| +** greater and the function pointer is not NULL) and will fall back
|
| +** to xCurrentTime() if xCurrentTimeInt64() is unavailable.
|
| */
|
| typedef struct sqlite3_vfs sqlite3_vfs;
|
| struct sqlite3_vfs {
|
| - int iVersion; /* Structure version number */
|
| + int iVersion; /* Structure version number (currently 2) */
|
| int szOsFile; /* Size of subclassed sqlite3_file */
|
| int mxPathname; /* Maximum file pathname length */
|
| sqlite3_vfs *pNext; /* Next registered VFS */
|
| @@ -808,61 +886,123 @@ struct sqlite3_vfs {
|
| int (*xSleep)(sqlite3_vfs*, int microseconds);
|
| int (*xCurrentTime)(sqlite3_vfs*, double*);
|
| int (*xGetLastError)(sqlite3_vfs*, int, char *);
|
| - /* New fields may be appended in figure versions. The iVersion
|
| - ** value will increment whenever this happens. */
|
| + /*
|
| + ** The methods above are in version 1 of the sqlite_vfs object
|
| + ** definition. Those that follow are added in version 2 or later
|
| + */
|
| + int (*xCurrentTimeInt64)(sqlite3_vfs*, sqlite3_int64*);
|
| + /*
|
| + ** The methods above are in versions 1 and 2 of the sqlite_vfs object.
|
| + ** New fields may be appended in figure versions. The iVersion
|
| + ** value will increment whenever this happens.
|
| + */
|
| };
|
|
|
| /*
|
| -** CAPI3REF: Flags for the xAccess VFS method {H11190} <H11140>
|
| +** CAPI3REF: Flags for the xAccess VFS method
|
| **
|
| ** These integer constants can be used as the third parameter to
|
| -** the xAccess method of an [sqlite3_vfs] object. {END} They determine
|
| +** the xAccess method of an [sqlite3_vfs] object. They determine
|
| ** what kind of permissions the xAccess method is looking for.
|
| ** With SQLITE_ACCESS_EXISTS, the xAccess method
|
| ** simply checks whether the file exists.
|
| ** With SQLITE_ACCESS_READWRITE, the xAccess method
|
| -** checks whether the file is both readable and writable.
|
| +** checks whether the named directory is both readable and writable
|
| +** (in other words, if files can be added, removed, and renamed within
|
| +** the directory).
|
| +** The SQLITE_ACCESS_READWRITE constant is currently used only by the
|
| +** [temp_store_directory pragma], though this could change in a future
|
| +** release of SQLite.
|
| ** With SQLITE_ACCESS_READ, the xAccess method
|
| -** checks whether the file is readable.
|
| +** checks whether the file is readable. The SQLITE_ACCESS_READ constant is
|
| +** currently unused, though it might be used in a future release of
|
| +** SQLite.
|
| */
|
| #define SQLITE_ACCESS_EXISTS 0
|
| -#define SQLITE_ACCESS_READWRITE 1
|
| -#define SQLITE_ACCESS_READ 2
|
| +#define SQLITE_ACCESS_READWRITE 1 /* Used by PRAGMA temp_store_directory */
|
| +#define SQLITE_ACCESS_READ 2 /* Unused */
|
|
|
| /*
|
| -** CAPI3REF: Initialize The SQLite Library {H10130} <S20000><S30100>
|
| +** CAPI3REF: Flags for the xShmLock VFS method
|
| +**
|
| +** These integer constants define the various locking operations
|
| +** allowed by the xShmLock method of [sqlite3_io_methods]. The
|
| +** following are the only legal combinations of flags to the
|
| +** xShmLock method:
|
| +**
|
| +** <ul>
|
| +** <li> SQLITE_SHM_LOCK | SQLITE_SHM_SHARED
|
| +** <li> SQLITE_SHM_LOCK | SQLITE_SHM_EXCLUSIVE
|
| +** <li> SQLITE_SHM_UNLOCK | SQLITE_SHM_SHARED
|
| +** <li> SQLITE_SHM_UNLOCK | SQLITE_SHM_EXCLUSIVE
|
| +** </ul>
|
| **
|
| -** The sqlite3_initialize() routine initializes the
|
| -** SQLite library. The sqlite3_shutdown() routine
|
| +** When unlocking, the same SHARED or EXCLUSIVE flag must be supplied as
|
| +** was given no the corresponding lock.
|
| +**
|
| +** The xShmLock method can transition between unlocked and SHARED or
|
| +** between unlocked and EXCLUSIVE. It cannot transition between SHARED
|
| +** and EXCLUSIVE.
|
| +*/
|
| +#define SQLITE_SHM_UNLOCK 1
|
| +#define SQLITE_SHM_LOCK 2
|
| +#define SQLITE_SHM_SHARED 4
|
| +#define SQLITE_SHM_EXCLUSIVE 8
|
| +
|
| +/*
|
| +** CAPI3REF: Maximum xShmLock index
|
| +**
|
| +** The xShmLock method on [sqlite3_io_methods] may use values
|
| +** between 0 and this upper bound as its "offset" argument.
|
| +** The SQLite core will never attempt to acquire or release a
|
| +** lock outside of this range
|
| +*/
|
| +#define SQLITE_SHM_NLOCK 8
|
| +
|
| +
|
| +/*
|
| +** CAPI3REF: Initialize The SQLite Library
|
| +**
|
| +** ^The sqlite3_initialize() routine initializes the
|
| +** SQLite library. ^The sqlite3_shutdown() routine
|
| ** deallocates any resources that were allocated by sqlite3_initialize().
|
| +** These routines are designed to aid in process initialization and
|
| +** shutdown on embedded systems. Workstation applications using
|
| +** SQLite normally do not need to invoke either of these routines.
|
| **
|
| ** A call to sqlite3_initialize() is an "effective" call if it is
|
| ** the first time sqlite3_initialize() is invoked during the lifetime of
|
| ** the process, or if it is the first time sqlite3_initialize() is invoked
|
| -** following a call to sqlite3_shutdown(). Only an effective call
|
| +** following a call to sqlite3_shutdown(). ^(Only an effective call
|
| ** of sqlite3_initialize() does any initialization. All other calls
|
| -** are harmless no-ops.
|
| +** are harmless no-ops.)^
|
| **
|
| ** A call to sqlite3_shutdown() is an "effective" call if it is the first
|
| -** call to sqlite3_shutdown() since the last sqlite3_initialize(). Only
|
| +** call to sqlite3_shutdown() since the last sqlite3_initialize(). ^(Only
|
| ** an effective call to sqlite3_shutdown() does any deinitialization.
|
| -** All other calls to sqlite3_shutdown() are harmless no-ops.
|
| +** All other valid calls to sqlite3_shutdown() are harmless no-ops.)^
|
| **
|
| -** Among other things, sqlite3_initialize() shall invoke
|
| -** sqlite3_os_init(). Similarly, sqlite3_shutdown()
|
| -** shall invoke sqlite3_os_end().
|
| +** The sqlite3_initialize() interface is threadsafe, but sqlite3_shutdown()
|
| +** is not. The sqlite3_shutdown() interface must only be called from a
|
| +** single thread. All open [database connections] must be closed and all
|
| +** other SQLite resources must be deallocated prior to invoking
|
| +** sqlite3_shutdown().
|
| **
|
| -** The sqlite3_initialize() routine returns [SQLITE_OK] on success.
|
| -** If for some reason, sqlite3_initialize() is unable to initialize
|
| +** Among other things, ^sqlite3_initialize() will invoke
|
| +** sqlite3_os_init(). Similarly, ^sqlite3_shutdown()
|
| +** will invoke sqlite3_os_end().
|
| +**
|
| +** ^The sqlite3_initialize() routine returns [SQLITE_OK] on success.
|
| +** ^If for some reason, sqlite3_initialize() is unable to initialize
|
| ** the library (perhaps it is unable to allocate a needed resource such
|
| ** as a mutex) it returns an [error code] other than [SQLITE_OK].
|
| **
|
| -** The sqlite3_initialize() routine is called internally by many other
|
| +** ^The sqlite3_initialize() routine is called internally by many other
|
| ** SQLite interfaces so that an application usually does not need to
|
| ** invoke sqlite3_initialize() directly. For example, [sqlite3_open()]
|
| ** calls sqlite3_initialize() so the SQLite library will be automatically
|
| ** initialized when [sqlite3_open()] is called if it has not be initialized
|
| -** already. However, if SQLite is compiled with the [SQLITE_OMIT_AUTOINIT]
|
| +** already. ^However, if SQLite is compiled with the [SQLITE_OMIT_AUTOINIT]
|
| ** compile-time option, then the automatic calls to sqlite3_initialize()
|
| ** are omitted and the application must call sqlite3_initialize() directly
|
| ** prior to using any other SQLite interface. For maximum portability,
|
| @@ -901,8 +1041,7 @@ SQLITE_API int sqlite3_os_init(void);
|
| SQLITE_API int sqlite3_os_end(void);
|
|
|
| /*
|
| -** CAPI3REF: Configuring The SQLite Library {H14100} <S20000><S30200>
|
| -** EXPERIMENTAL
|
| +** CAPI3REF: Configuring The SQLite Library
|
| **
|
| ** The sqlite3_config() interface is used to make global configuration
|
| ** changes to SQLite in order to tune SQLite to the specific needs of
|
| @@ -915,7 +1054,9 @@ SQLITE_API int sqlite3_os_end(void);
|
| ** threads while sqlite3_config() is running. Furthermore, sqlite3_config()
|
| ** may only be invoked prior to library initialization using
|
| ** [sqlite3_initialize()] or after shutdown by [sqlite3_shutdown()].
|
| -** Note, however, that sqlite3_config() can be called as part of the
|
| +** ^If sqlite3_config() is called after [sqlite3_initialize()] and before
|
| +** [sqlite3_shutdown()] then it will return SQLITE_MISUSE.
|
| +** Note, however, that ^sqlite3_config() can be called as part of the
|
| ** implementation of an application-defined [sqlite3_os_init()].
|
| **
|
| ** The first argument to sqlite3_config() is an integer
|
| @@ -924,26 +1065,20 @@ SQLITE_API int sqlite3_os_end(void);
|
| ** vary depending on the [SQLITE_CONFIG_SINGLETHREAD | configuration option]
|
| ** in the first argument.
|
| **
|
| -** When a configuration option is set, sqlite3_config() returns [SQLITE_OK].
|
| -** If the option is unknown or SQLite is unable to set the option
|
| +** ^When a configuration option is set, sqlite3_config() returns [SQLITE_OK].
|
| +** ^If the option is unknown or SQLite is unable to set the option
|
| ** then this routine returns a non-zero [error code].
|
| -**
|
| -** Requirements:
|
| -** [H14103] [H14106] [H14120] [H14123] [H14126] [H14129] [H14132] [H14135]
|
| -** [H14138] [H14141] [H14144] [H14147] [H14150] [H14153] [H14156] [H14159]
|
| -** [H14162] [H14165] [H14168]
|
| */
|
| -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_config(int, ...);
|
| +SQLITE_API int sqlite3_config(int, ...);
|
|
|
| /*
|
| -** CAPI3REF: Configure database connections {H14200} <S20000>
|
| -** EXPERIMENTAL
|
| +** CAPI3REF: Configure database connections
|
| **
|
| ** The sqlite3_db_config() interface is used to make configuration
|
| ** changes to a [database connection]. The interface is similar to
|
| ** [sqlite3_config()] except that the changes apply to a single
|
| ** [database connection] (specified in the first argument). The
|
| -** sqlite3_db_config() interface can only be used immediately after
|
| +** sqlite3_db_config() interface should only be used immediately after
|
| ** the database connection is created using [sqlite3_open()],
|
| ** [sqlite3_open16()], or [sqlite3_open_v2()].
|
| **
|
| @@ -954,14 +1089,13 @@ SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_config(int, ...);
|
| ** New verbs are likely to be added in future releases of SQLite.
|
| ** Additional arguments depend on the verb.
|
| **
|
| -** Requirements:
|
| -** [H14203] [H14206] [H14209] [H14212] [H14215]
|
| +** ^Calls to sqlite3_db_config() return SQLITE_OK if and only if
|
| +** the call is considered successful.
|
| */
|
| -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_db_config(sqlite3*, int op, ...);
|
| +SQLITE_API int sqlite3_db_config(sqlite3*, int op, ...);
|
|
|
| /*
|
| -** CAPI3REF: Memory Allocation Routines {H10155} <S20120>
|
| -** EXPERIMENTAL
|
| +** CAPI3REF: Memory Allocation Routines
|
| **
|
| ** An instance of this object defines the interface between SQLite
|
| ** and low-level memory allocation routines.
|
| @@ -990,7 +1124,7 @@ SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_db_config(sqlite3*, int op, ...);
|
| ** The xRealloc method must work like realloc() from the standard C library
|
| ** with the exception that if the second argument to xRealloc is zero,
|
| ** xRealloc must be a no-op - it must not perform any allocation or
|
| -** deallocation. SQLite guaranteeds that the second argument to
|
| +** deallocation. ^SQLite guarantees that the second argument to
|
| ** xRealloc is always a value returned by a prior call to xRoundup.
|
| ** And so in cases where xRoundup always returns a positive number,
|
| ** xRealloc can perform exactly as the standard library realloc() and
|
| @@ -1042,8 +1176,7 @@ struct sqlite3_mem_methods {
|
| };
|
|
|
| /*
|
| -** CAPI3REF: Configuration Options {H10160} <S20000>
|
| -** EXPERIMENTAL
|
| +** CAPI3REF: Configuration Options
|
| **
|
| ** These constants are the available integer configuration options that
|
| ** can be passed as the first argument to the [sqlite3_config()] interface.
|
| @@ -1057,22 +1190,33 @@ struct sqlite3_mem_methods {
|
| **
|
| ** <dl>
|
| ** <dt>SQLITE_CONFIG_SINGLETHREAD</dt>
|
| -** <dd>There are no arguments to this option. This option disables
|
| +** <dd>There are no arguments to this option. ^This option sets the
|
| +** [threading mode] to Single-thread. In other words, it disables
|
| ** all mutexing and puts SQLite into a mode where it can only be used
|
| -** by a single thread.</dd>
|
| +** by a single thread. ^If SQLite is compiled with
|
| +** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
|
| +** it is not possible to change the [threading mode] from its default
|
| +** value of Single-thread and so [sqlite3_config()] will return
|
| +** [SQLITE_ERROR] if called with the SQLITE_CONFIG_SINGLETHREAD
|
| +** configuration option.</dd>
|
| **
|
| ** <dt>SQLITE_CONFIG_MULTITHREAD</dt>
|
| -** <dd>There are no arguments to this option. This option disables
|
| +** <dd>There are no arguments to this option. ^This option sets the
|
| +** [threading mode] to Multi-thread. In other words, it disables
|
| ** mutexing on [database connection] and [prepared statement] objects.
|
| ** The application is responsible for serializing access to
|
| ** [database connections] and [prepared statements]. But other mutexes
|
| ** are enabled so that SQLite will be safe to use in a multi-threaded
|
| ** environment as long as no two threads attempt to use the same
|
| -** [database connection] at the same time. See the [threading mode]
|
| -** documentation for additional information.</dd>
|
| +** [database connection] at the same time. ^If SQLite is compiled with
|
| +** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
|
| +** it is not possible to set the Multi-thread [threading mode] and
|
| +** [sqlite3_config()] will return [SQLITE_ERROR] if called with the
|
| +** SQLITE_CONFIG_MULTITHREAD configuration option.</dd>
|
| **
|
| ** <dt>SQLITE_CONFIG_SERIALIZED</dt>
|
| -** <dd>There are no arguments to this option. This option enables
|
| +** <dd>There are no arguments to this option. ^This option sets the
|
| +** [threading mode] to Serialized. In other words, this option enables
|
| ** all mutexes including the recursive
|
| ** mutexes on [database connection] and [prepared statement] objects.
|
| ** In this mode (which is the default when SQLite is compiled with
|
| @@ -1080,55 +1224,62 @@ struct sqlite3_mem_methods {
|
| ** to [database connections] and [prepared statements] so that the
|
| ** application is free to use the same [database connection] or the
|
| ** same [prepared statement] in different threads at the same time.
|
| -** See the [threading mode] documentation for additional information.</dd>
|
| +** ^If SQLite is compiled with
|
| +** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
|
| +** it is not possible to set the Serialized [threading mode] and
|
| +** [sqlite3_config()] will return [SQLITE_ERROR] if called with the
|
| +** SQLITE_CONFIG_SERIALIZED configuration option.</dd>
|
| **
|
| ** <dt>SQLITE_CONFIG_MALLOC</dt>
|
| -** <dd>This option takes a single argument which is a pointer to an
|
| +** <dd> ^(This option takes a single argument which is a pointer to an
|
| ** instance of the [sqlite3_mem_methods] structure. The argument specifies
|
| ** alternative low-level memory allocation routines to be used in place of
|
| -** the memory allocation routines built into SQLite.</dd>
|
| +** the memory allocation routines built into SQLite.)^ ^SQLite makes
|
| +** its own private copy of the content of the [sqlite3_mem_methods] structure
|
| +** before the [sqlite3_config()] call returns.</dd>
|
| **
|
| ** <dt>SQLITE_CONFIG_GETMALLOC</dt>
|
| -** <dd>This option takes a single argument which is a pointer to an
|
| +** <dd> ^(This option takes a single argument which is a pointer to an
|
| ** instance of the [sqlite3_mem_methods] structure. The [sqlite3_mem_methods]
|
| -** structure is filled with the currently defined memory allocation routines.
|
| +** structure is filled with the currently defined memory allocation routines.)^
|
| ** This option can be used to overload the default memory allocation
|
| ** routines with a wrapper that simulations memory allocation failure or
|
| -** tracks memory usage, for example.</dd>
|
| +** tracks memory usage, for example. </dd>
|
| **
|
| ** <dt>SQLITE_CONFIG_MEMSTATUS</dt>
|
| -** <dd>This option takes single argument of type int, interpreted as a
|
| +** <dd> ^This option takes single argument of type int, interpreted as a
|
| ** boolean, which enables or disables the collection of memory allocation
|
| -** statistics. When disabled, the following SQLite interfaces become
|
| -** non-operational:
|
| +** statistics. ^(When memory allocation statistics are disabled, the
|
| +** following SQLite interfaces become non-operational:
|
| ** <ul>
|
| ** <li> [sqlite3_memory_used()]
|
| ** <li> [sqlite3_memory_highwater()]
|
| -** <li> [sqlite3_soft_heap_limit()]
|
| +** <li> [sqlite3_soft_heap_limit64()]
|
| ** <li> [sqlite3_status()]
|
| -** </ul>
|
| +** </ul>)^
|
| +** ^Memory allocation statistics are enabled by default unless SQLite is
|
| +** compiled with [SQLITE_DEFAULT_MEMSTATUS]=0 in which case memory
|
| +** allocation statistics are disabled by default.
|
| ** </dd>
|
| **
|
| ** <dt>SQLITE_CONFIG_SCRATCH</dt>
|
| -** <dd>This option specifies a static memory buffer that SQLite can use for
|
| +** <dd> ^This option specifies a static memory buffer that SQLite can use for
|
| ** scratch memory. There are three arguments: A pointer an 8-byte
|
| ** aligned memory buffer from which the scrach allocations will be
|
| ** drawn, the size of each scratch allocation (sz),
|
| ** and the maximum number of scratch allocations (N). The sz
|
| -** argument must be a multiple of 16. The sz parameter should be a few bytes
|
| -** larger than the actual scratch space required due to internal overhead.
|
| -** The first argument should pointer to an 8-byte aligned buffer
|
| +** argument must be a multiple of 16.
|
| +** The first argument must be a pointer to an 8-byte aligned buffer
|
| ** of at least sz*N bytes of memory.
|
| -** SQLite will use no more than one scratch buffer at once per thread, so
|
| -** N should be set to the expected maximum number of threads. The sz
|
| -** parameter should be 6 times the size of the largest database page size.
|
| -** Scratch buffers are used as part of the btree balance operation. If
|
| -** The btree balancer needs additional memory beyond what is provided by
|
| -** scratch buffers or if no scratch buffer space is specified, then SQLite
|
| -** goes to [sqlite3_malloc()] to obtain the memory it needs.</dd>
|
| +** ^SQLite will use no more than two scratch buffers per thread. So
|
| +** N should be set to twice the expected maximum number of threads.
|
| +** ^SQLite will never require a scratch buffer that is more than 6
|
| +** times the database page size. ^If SQLite needs needs additional
|
| +** scratch memory beyond what is provided by this configuration option, then
|
| +** [sqlite3_malloc()] will be used to obtain the memory needed.</dd>
|
| **
|
| ** <dt>SQLITE_CONFIG_PAGECACHE</dt>
|
| -** <dd>This option specifies a static memory buffer that SQLite can use for
|
| +** <dd> ^This option specifies a static memory buffer that SQLite can use for
|
| ** the database page cache with the default page cache implemenation.
|
| ** This configuration should not be used if an application-define page
|
| ** cache implementation is loaded using the SQLITE_CONFIG_PCACHE option.
|
| @@ -1136,28 +1287,27 @@ struct sqlite3_mem_methods {
|
| ** memory, the size of each page buffer (sz), and the number of pages (N).
|
| ** The sz argument should be the size of the largest database page
|
| ** (a power of two between 512 and 32768) plus a little extra for each
|
| -** page header. The page header size is 20 to 40 bytes depending on
|
| -** the host architecture. It is harmless, apart from the wasted memory,
|
| +** page header. ^The page header size is 20 to 40 bytes depending on
|
| +** the host architecture. ^It is harmless, apart from the wasted memory,
|
| ** to make sz a little too large. The first
|
| ** argument should point to an allocation of at least sz*N bytes of memory.
|
| -** SQLite will use the memory provided by the first argument to satisfy its
|
| -** memory needs for the first N pages that it adds to cache. If additional
|
| +** ^SQLite will use the memory provided by the first argument to satisfy its
|
| +** memory needs for the first N pages that it adds to cache. ^If additional
|
| ** page cache memory is needed beyond what is provided by this option, then
|
| ** SQLite goes to [sqlite3_malloc()] for the additional storage space.
|
| -** The implementation might use one or more of the N buffers to hold
|
| -** memory accounting information. The pointer in the first argument must
|
| +** The pointer in the first argument must
|
| ** be aligned to an 8-byte boundary or subsequent behavior of SQLite
|
| ** will be undefined.</dd>
|
| **
|
| ** <dt>SQLITE_CONFIG_HEAP</dt>
|
| -** <dd>This option specifies a static memory buffer that SQLite will use
|
| +** <dd> ^This option specifies a static memory buffer that SQLite will use
|
| ** for all of its dynamic memory allocation needs beyond those provided
|
| ** for by [SQLITE_CONFIG_SCRATCH] and [SQLITE_CONFIG_PAGECACHE].
|
| ** There are three arguments: An 8-byte aligned pointer to the memory,
|
| ** the number of bytes in the memory buffer, and the minimum allocation size.
|
| -** If the first pointer (the memory pointer) is NULL, then SQLite reverts
|
| +** ^If the first pointer (the memory pointer) is NULL, then SQLite reverts
|
| ** to using its default memory allocator (the system malloc() implementation),
|
| -** undoing any prior invocation of [SQLITE_CONFIG_MALLOC]. If the
|
| +** undoing any prior invocation of [SQLITE_CONFIG_MALLOC]. ^If the
|
| ** memory pointer is not NULL and either [SQLITE_ENABLE_MEMSYS3] or
|
| ** [SQLITE_ENABLE_MEMSYS5] are defined, then the alternative memory
|
| ** allocator is engaged to handle all of SQLites memory allocation needs.
|
| @@ -1165,39 +1315,68 @@ struct sqlite3_mem_methods {
|
| ** boundary or subsequent behavior of SQLite will be undefined.</dd>
|
| **
|
| ** <dt>SQLITE_CONFIG_MUTEX</dt>
|
| -** <dd>This option takes a single argument which is a pointer to an
|
| +** <dd> ^(This option takes a single argument which is a pointer to an
|
| ** instance of the [sqlite3_mutex_methods] structure. The argument specifies
|
| ** alternative low-level mutex routines to be used in place
|
| -** the mutex routines built into SQLite.</dd>
|
| +** the mutex routines built into SQLite.)^ ^SQLite makes a copy of the
|
| +** content of the [sqlite3_mutex_methods] structure before the call to
|
| +** [sqlite3_config()] returns. ^If SQLite is compiled with
|
| +** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
|
| +** the entire mutexing subsystem is omitted from the build and hence calls to
|
| +** [sqlite3_config()] with the SQLITE_CONFIG_MUTEX configuration option will
|
| +** return [SQLITE_ERROR].</dd>
|
| **
|
| ** <dt>SQLITE_CONFIG_GETMUTEX</dt>
|
| -** <dd>This option takes a single argument which is a pointer to an
|
| +** <dd> ^(This option takes a single argument which is a pointer to an
|
| ** instance of the [sqlite3_mutex_methods] structure. The
|
| ** [sqlite3_mutex_methods]
|
| -** structure is filled with the currently defined mutex routines.
|
| +** structure is filled with the currently defined mutex routines.)^
|
| ** This option can be used to overload the default mutex allocation
|
| ** routines with a wrapper used to track mutex usage for performance
|
| -** profiling or testing, for example.</dd>
|
| +** profiling or testing, for example. ^If SQLite is compiled with
|
| +** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
|
| +** the entire mutexing subsystem is omitted from the build and hence calls to
|
| +** [sqlite3_config()] with the SQLITE_CONFIG_GETMUTEX configuration option will
|
| +** return [SQLITE_ERROR].</dd>
|
| **
|
| ** <dt>SQLITE_CONFIG_LOOKASIDE</dt>
|
| -** <dd>This option takes two arguments that determine the default
|
| -** memory allocation lookaside optimization. The first argument is the
|
| +** <dd> ^(This option takes two arguments that determine the default
|
| +** memory allocation for the lookaside memory allocator on each
|
| +** [database connection]. The first argument is the
|
| ** size of each lookaside buffer slot and the second is the number of
|
| -** slots allocated to each database connection. This option sets the
|
| -** <i>default</i> lookaside size. The [SQLITE_DBCONFIG_LOOKASIDE]
|
| +** slots allocated to each database connection.)^ ^(This option sets the
|
| +** <i>default</i> lookaside size. The [SQLITE_DBCONFIG_LOOKASIDE]
|
| ** verb to [sqlite3_db_config()] can be used to change the lookaside
|
| -** configuration on individual connections.</dd>
|
| +** configuration on individual connections.)^ </dd>
|
| **
|
| ** <dt>SQLITE_CONFIG_PCACHE</dt>
|
| -** <dd>This option takes a single argument which is a pointer to
|
| +** <dd> ^(This option takes a single argument which is a pointer to
|
| ** an [sqlite3_pcache_methods] object. This object specifies the interface
|
| -** to a custom page cache implementation. SQLite makes a copy of the
|
| +** to a custom page cache implementation.)^ ^SQLite makes a copy of the
|
| ** object and uses it for page cache memory allocations.</dd>
|
| **
|
| ** <dt>SQLITE_CONFIG_GETPCACHE</dt>
|
| -** <dd>This option takes a single argument which is a pointer to an
|
| +** <dd> ^(This option takes a single argument which is a pointer to an
|
| ** [sqlite3_pcache_methods] object. SQLite copies of the current
|
| -** page cache implementation into that object.</dd>
|
| +** page cache implementation into that object.)^ </dd>
|
| +**
|
| +** <dt>SQLITE_CONFIG_LOG</dt>
|
| +** <dd> ^The SQLITE_CONFIG_LOG option takes two arguments: a pointer to a
|
| +** function with a call signature of void(*)(void*,int,const char*),
|
| +** and a pointer to void. ^If the function pointer is not NULL, it is
|
| +** invoked by [sqlite3_log()] to process each logging event. ^If the
|
| +** function pointer is NULL, the [sqlite3_log()] interface becomes a no-op.
|
| +** ^The void pointer that is the second argument to SQLITE_CONFIG_LOG is
|
| +** passed through as the first parameter to the application-defined logger
|
| +** function whenever that function is invoked. ^The second parameter to
|
| +** the logger function is a copy of the first parameter to the corresponding
|
| +** [sqlite3_log()] call and is intended to be a [result code] or an
|
| +** [extended result code]. ^The third parameter passed to the logger is
|
| +** log message after formatting via [sqlite3_snprintf()].
|
| +** The SQLite logging interface is not reentrant; the logger function
|
| +** supplied by the application must not invoke any SQLite interface.
|
| +** In a multi-threaded application, the application-defined logger
|
| +** function must be threadsafe. </dd>
|
| **
|
| ** </dl>
|
| */
|
| @@ -1216,10 +1395,10 @@ struct sqlite3_mem_methods {
|
| #define SQLITE_CONFIG_LOOKASIDE 13 /* int int */
|
| #define SQLITE_CONFIG_PCACHE 14 /* sqlite3_pcache_methods* */
|
| #define SQLITE_CONFIG_GETPCACHE 15 /* sqlite3_pcache_methods* */
|
| +#define SQLITE_CONFIG_LOG 16 /* xFunc, void* */
|
|
|
| /*
|
| -** CAPI3REF: Configuration Options {H10170} <S20000>
|
| -** EXPERIMENTAL
|
| +** CAPI3REF: Database Connection Configuration Options
|
| **
|
| ** These constants are the available integer configuration options that
|
| ** can be passed as the second argument to the [sqlite3_db_config()] interface.
|
| @@ -1227,24 +1406,32 @@ struct sqlite3_mem_methods {
|
| ** New configuration options may be added in future releases of SQLite.
|
| ** Existing configuration options might be discontinued. Applications
|
| ** should check the return code from [sqlite3_db_config()] to make sure that
|
| -** the call worked. The [sqlite3_db_config()] interface will return a
|
| +** the call worked. ^The [sqlite3_db_config()] interface will return a
|
| ** non-zero [error code] if a discontinued or unsupported configuration option
|
| ** is invoked.
|
| **
|
| ** <dl>
|
| ** <dt>SQLITE_DBCONFIG_LOOKASIDE</dt>
|
| -** <dd>This option takes three additional arguments that determine the
|
| +** <dd> ^This option takes three additional arguments that determine the
|
| ** [lookaside memory allocator] configuration for the [database connection].
|
| -** The first argument (the third parameter to [sqlite3_db_config()] is a
|
| +** ^The first argument (the third parameter to [sqlite3_db_config()] is a
|
| ** pointer to an memory buffer to use for lookaside memory.
|
| -** The first argument may be NULL in which case SQLite will allocate the
|
| -** lookaside buffer itself using [sqlite3_malloc()]. The second argument is the
|
| -** size of each lookaside buffer slot and the third argument is the number of
|
| +** ^The first argument after the SQLITE_DBCONFIG_LOOKASIDE verb
|
| +** may be NULL in which case SQLite will allocate the
|
| +** lookaside buffer itself using [sqlite3_malloc()]. ^The second argument is the
|
| +** size of each lookaside buffer slot. ^The third argument is the number of
|
| ** slots. The size of the buffer in the first argument must be greater than
|
| ** or equal to the product of the second and third arguments. The buffer
|
| -** must be aligned to an 8-byte boundary. If the second argument is not
|
| -** a multiple of 8, it is internally rounded down to the next smaller
|
| -** multiple of 8. See also: [SQLITE_CONFIG_LOOKASIDE]</dd>
|
| +** must be aligned to an 8-byte boundary. ^If the second argument to
|
| +** SQLITE_DBCONFIG_LOOKASIDE is not a multiple of 8, it is internally
|
| +** rounded down to the next smaller multiple of 8. ^(The lookaside memory
|
| +** configuration for a database connection can only be changed when that
|
| +** connection is not currently using lookaside memory, or in other words
|
| +** when the "current value" returned by
|
| +** [sqlite3_db_status](D,[SQLITE_CONFIG_LOOKASIDE],...) is zero.
|
| +** Any attempt to change the lookaside memory configuration when lookaside
|
| +** memory is in use leaves the configuration unchanged and returns
|
| +** [SQLITE_BUSY].)^</dd>
|
| **
|
| ** </dl>
|
| */
|
| @@ -1252,52 +1439,49 @@ struct sqlite3_mem_methods {
|
|
|
|
|
| /*
|
| -** CAPI3REF: Enable Or Disable Extended Result Codes {H12200} <S10700>
|
| -**
|
| -** The sqlite3_extended_result_codes() routine enables or disables the
|
| -** [extended result codes] feature of SQLite. The extended result
|
| -** codes are disabled by default for historical compatibility considerations.
|
| +** CAPI3REF: Enable Or Disable Extended Result Codes
|
| **
|
| -** Requirements:
|
| -** [H12201] [H12202]
|
| +** ^The sqlite3_extended_result_codes() routine enables or disables the
|
| +** [extended result codes] feature of SQLite. ^The extended result
|
| +** codes are disabled by default for historical compatibility.
|
| */
|
| SQLITE_API int sqlite3_extended_result_codes(sqlite3*, int onoff);
|
|
|
| /*
|
| -** CAPI3REF: Last Insert Rowid {H12220} <S10700>
|
| +** CAPI3REF: Last Insert Rowid
|
| **
|
| -** Each entry in an SQLite table has a unique 64-bit signed
|
| -** integer key called the [ROWID | "rowid"]. The rowid is always available
|
| +** ^Each entry in an SQLite table has a unique 64-bit signed
|
| +** integer key called the [ROWID | "rowid"]. ^The rowid is always available
|
| ** as an undeclared column named ROWID, OID, or _ROWID_ as long as those
|
| -** names are not also used by explicitly declared columns. If
|
| +** names are not also used by explicitly declared columns. ^If
|
| ** the table has a column of type [INTEGER PRIMARY KEY] then that column
|
| ** is another alias for the rowid.
|
| **
|
| -** This routine returns the [rowid] of the most recent
|
| +** ^This routine returns the [rowid] of the most recent
|
| ** successful [INSERT] into the database from the [database connection]
|
| -** in the first argument. If no successful [INSERT]s
|
| +** in the first argument. ^If no successful [INSERT]s
|
| ** have ever occurred on that database connection, zero is returned.
|
| **
|
| -** If an [INSERT] occurs within a trigger, then the [rowid] of the inserted
|
| +** ^(If an [INSERT] occurs within a trigger, then the [rowid] of the inserted
|
| ** row is returned by this routine as long as the trigger is running.
|
| ** But once the trigger terminates, the value returned by this routine
|
| -** reverts to the last value inserted before the trigger fired.
|
| +** reverts to the last value inserted before the trigger fired.)^
|
| **
|
| -** An [INSERT] that fails due to a constraint violation is not a
|
| +** ^An [INSERT] that fails due to a constraint violation is not a
|
| ** successful [INSERT] and does not change the value returned by this
|
| -** routine. Thus INSERT OR FAIL, INSERT OR IGNORE, INSERT OR ROLLBACK,
|
| +** routine. ^Thus INSERT OR FAIL, INSERT OR IGNORE, INSERT OR ROLLBACK,
|
| ** and INSERT OR ABORT make no changes to the return value of this
|
| -** routine when their insertion fails. When INSERT OR REPLACE
|
| +** routine when their insertion fails. ^(When INSERT OR REPLACE
|
| ** encounters a constraint violation, it does not fail. The
|
| ** INSERT continues to completion after deleting rows that caused
|
| ** the constraint problem so INSERT OR REPLACE will always change
|
| -** the return value of this interface.
|
| +** the return value of this interface.)^
|
| **
|
| -** For the purposes of this routine, an [INSERT] is considered to
|
| +** ^For the purposes of this routine, an [INSERT] is considered to
|
| ** be successful even if it is subsequently rolled back.
|
| **
|
| -** Requirements:
|
| -** [H12221] [H12223]
|
| +** This function is accessible to SQL statements via the
|
| +** [last_insert_rowid() SQL function].
|
| **
|
| ** If a separate thread performs a new [INSERT] on the same
|
| ** database connection while the [sqlite3_last_insert_rowid()]
|
| @@ -1309,24 +1493,25 @@ SQLITE_API int sqlite3_extended_result_codes(sqlite3*, int onoff);
|
| SQLITE_API sqlite3_int64 sqlite3_last_insert_rowid(sqlite3*);
|
|
|
| /*
|
| -** CAPI3REF: Count The Number Of Rows Modified {H12240} <S10600>
|
| +** CAPI3REF: Count The Number Of Rows Modified
|
| **
|
| -** This function returns the number of database rows that were changed
|
| +** ^This function returns the number of database rows that were changed
|
| ** or inserted or deleted by the most recently completed SQL statement
|
| ** on the [database connection] specified by the first parameter.
|
| -** Only changes that are directly specified by the [INSERT], [UPDATE],
|
| +** ^(Only changes that are directly specified by the [INSERT], [UPDATE],
|
| ** or [DELETE] statement are counted. Auxiliary changes caused by
|
| -** triggers are not counted. Use the [sqlite3_total_changes()] function
|
| -** to find the total number of changes including changes caused by triggers.
|
| +** triggers or [foreign key actions] are not counted.)^ Use the
|
| +** [sqlite3_total_changes()] function to find the total number of changes
|
| +** including changes caused by triggers and foreign key actions.
|
| **
|
| -** Changes to a view that are simulated by an [INSTEAD OF trigger]
|
| +** ^Changes to a view that are simulated by an [INSTEAD OF trigger]
|
| ** are not counted. Only real table changes are counted.
|
| **
|
| -** A "row change" is a change to a single row of a single table
|
| +** ^(A "row change" is a change to a single row of a single table
|
| ** caused by an INSERT, DELETE, or UPDATE statement. Rows that
|
| ** are changed as side effects of [REPLACE] constraint resolution,
|
| ** rollback, ABORT processing, [DROP TABLE], or by any other
|
| -** mechanisms do not count as direct row changes.
|
| +** mechanisms do not count as direct row changes.)^
|
| **
|
| ** A "trigger context" is a scope of execution that begins and
|
| ** ends with the script of a [CREATE TRIGGER | trigger].
|
| @@ -1336,27 +1521,24 @@ SQLITE_API sqlite3_int64 sqlite3_last_insert_rowid(sqlite3*);
|
| ** new trigger context is entered for the duration of that one
|
| ** trigger. Subtriggers create subcontexts for their duration.
|
| **
|
| -** Calling [sqlite3_exec()] or [sqlite3_step()] recursively does
|
| +** ^Calling [sqlite3_exec()] or [sqlite3_step()] recursively does
|
| ** not create a new trigger context.
|
| **
|
| -** This function returns the number of direct row changes in the
|
| +** ^This function returns the number of direct row changes in the
|
| ** most recent INSERT, UPDATE, or DELETE statement within the same
|
| ** trigger context.
|
| **
|
| -** Thus, when called from the top level, this function returns the
|
| +** ^Thus, when called from the top level, this function returns the
|
| ** number of changes in the most recent INSERT, UPDATE, or DELETE
|
| -** that also occurred at the top level. Within the body of a trigger,
|
| +** that also occurred at the top level. ^(Within the body of a trigger,
|
| ** the sqlite3_changes() interface can be called to find the number of
|
| ** changes in the most recently completed INSERT, UPDATE, or DELETE
|
| ** statement within the body of the same trigger.
|
| ** However, the number returned does not include changes
|
| -** caused by subtriggers since those have their own context.
|
| +** caused by subtriggers since those have their own context.)^
|
| **
|
| -** See also the [sqlite3_total_changes()] interface and the
|
| -** [count_changes pragma].
|
| -**
|
| -** Requirements:
|
| -** [H12241] [H12243]
|
| +** See also the [sqlite3_total_changes()] interface, the
|
| +** [count_changes pragma], and the [changes() SQL function].
|
| **
|
| ** If a separate thread makes changes on the same database connection
|
| ** while [sqlite3_changes()] is running then the value returned
|
| @@ -1365,26 +1547,24 @@ SQLITE_API sqlite3_int64 sqlite3_last_insert_rowid(sqlite3*);
|
| SQLITE_API int sqlite3_changes(sqlite3*);
|
|
|
| /*
|
| -** CAPI3REF: Total Number Of Rows Modified {H12260} <S10600>
|
| +** CAPI3REF: Total Number Of Rows Modified
|
| **
|
| -** This function returns the number of row changes caused by [INSERT],
|
| +** ^This function returns the number of row changes caused by [INSERT],
|
| ** [UPDATE] or [DELETE] statements since the [database connection] was opened.
|
| -** The count includes all changes from all
|
| -** [CREATE TRIGGER | trigger] contexts. However,
|
| +** ^(The count returned by sqlite3_total_changes() includes all changes
|
| +** from all [CREATE TRIGGER | trigger] contexts and changes made by
|
| +** [foreign key actions]. However,
|
| ** the count does not include changes used to implement [REPLACE] constraints,
|
| ** do rollbacks or ABORT processing, or [DROP TABLE] processing. The
|
| ** count does not include rows of views that fire an [INSTEAD OF trigger],
|
| ** though if the INSTEAD OF trigger makes changes of its own, those changes
|
| -** are counted.
|
| -** The changes are counted as soon as the statement that makes them is
|
| -** completed (when the statement handle is passed to [sqlite3_reset()] or
|
| -** [sqlite3_finalize()]).
|
| -**
|
| -** See also the [sqlite3_changes()] interface and the
|
| -** [count_changes pragma].
|
| +** are counted.)^
|
| +** ^The sqlite3_total_changes() function counts the changes as soon as
|
| +** the statement that makes them is completed (when the statement handle
|
| +** is passed to [sqlite3_reset()] or [sqlite3_finalize()]).
|
| **
|
| -** Requirements:
|
| -** [H12261] [H12263]
|
| +** See also the [sqlite3_changes()] interface, the
|
| +** [count_changes pragma], and the [total_changes() SQL function].
|
| **
|
| ** If a separate thread makes changes on the same database connection
|
| ** while [sqlite3_total_changes()] is running then the value
|
| @@ -1393,75 +1573,70 @@ SQLITE_API int sqlite3_changes(sqlite3*);
|
| SQLITE_API int sqlite3_total_changes(sqlite3*);
|
|
|
| /*
|
| -** CAPI3REF: Interrupt A Long-Running Query {H12270} <S30500>
|
| +** CAPI3REF: Interrupt A Long-Running Query
|
| **
|
| -** This function causes any pending database operation to abort and
|
| +** ^This function causes any pending database operation to abort and
|
| ** return at its earliest opportunity. This routine is typically
|
| ** called in response to a user action such as pressing "Cancel"
|
| ** or Ctrl-C where the user wants a long query operation to halt
|
| ** immediately.
|
| **
|
| -** It is safe to call this routine from a thread different from the
|
| +** ^It is safe to call this routine from a thread different from the
|
| ** thread that is currently running the database operation. But it
|
| ** is not safe to call this routine with a [database connection] that
|
| ** is closed or might close before sqlite3_interrupt() returns.
|
| **
|
| -** If an SQL operation is very nearly finished at the time when
|
| +** ^If an SQL operation is very nearly finished at the time when
|
| ** sqlite3_interrupt() is called, then it might not have an opportunity
|
| ** to be interrupted and might continue to completion.
|
| **
|
| -** An SQL operation that is interrupted will return [SQLITE_INTERRUPT].
|
| -** If the interrupted SQL operation is an INSERT, UPDATE, or DELETE
|
| +** ^An SQL operation that is interrupted will return [SQLITE_INTERRUPT].
|
| +** ^If the interrupted SQL operation is an INSERT, UPDATE, or DELETE
|
| ** that is inside an explicit transaction, then the entire transaction
|
| ** will be rolled back automatically.
|
| **
|
| -** The sqlite3_interrupt(D) call is in effect until all currently running
|
| -** SQL statements on [database connection] D complete. Any new SQL statements
|
| +** ^The sqlite3_interrupt(D) call is in effect until all currently running
|
| +** SQL statements on [database connection] D complete. ^Any new SQL statements
|
| ** that are started after the sqlite3_interrupt() call and before the
|
| ** running statements reaches zero are interrupted as if they had been
|
| -** running prior to the sqlite3_interrupt() call. New SQL statements
|
| +** running prior to the sqlite3_interrupt() call. ^New SQL statements
|
| ** that are started after the running statement count reaches zero are
|
| ** not effected by the sqlite3_interrupt().
|
| -** A call to sqlite3_interrupt(D) that occurs when there are no running
|
| +** ^A call to sqlite3_interrupt(D) that occurs when there are no running
|
| ** SQL statements is a no-op and has no effect on SQL statements
|
| ** that are started after the sqlite3_interrupt() call returns.
|
| **
|
| -** Requirements:
|
| -** [H12271] [H12272]
|
| -**
|
| ** If the database connection closes while [sqlite3_interrupt()]
|
| ** is running then bad things will likely happen.
|
| */
|
| SQLITE_API void sqlite3_interrupt(sqlite3*);
|
|
|
| /*
|
| -** CAPI3REF: Determine If An SQL Statement Is Complete {H10510} <S70200>
|
| +** CAPI3REF: Determine If An SQL Statement Is Complete
|
| **
|
| ** These routines are useful during command-line input to determine if the
|
| ** currently entered text seems to form a complete SQL statement or
|
| ** if additional input is needed before sending the text into
|
| -** SQLite for parsing. These routines return 1 if the input string
|
| -** appears to be a complete SQL statement. A statement is judged to be
|
| +** SQLite for parsing. ^These routines return 1 if the input string
|
| +** appears to be a complete SQL statement. ^A statement is judged to be
|
| ** complete if it ends with a semicolon token and is not a prefix of a
|
| -** well-formed CREATE TRIGGER statement. Semicolons that are embedded within
|
| +** well-formed CREATE TRIGGER statement. ^Semicolons that are embedded within
|
| ** string literals or quoted identifier names or comments are not
|
| ** independent tokens (they are part of the token in which they are
|
| -** embedded) and thus do not count as a statement terminator. Whitespace
|
| +** embedded) and thus do not count as a statement terminator. ^Whitespace
|
| ** and comments that follow the final semicolon are ignored.
|
| **
|
| -** These routines return 0 if the statement is incomplete. If a
|
| +** ^These routines return 0 if the statement is incomplete. ^If a
|
| ** memory allocation fails, then SQLITE_NOMEM is returned.
|
| **
|
| -** These routines do not parse the SQL statements thus
|
| +** ^These routines do not parse the SQL statements thus
|
| ** will not detect syntactically incorrect SQL.
|
| **
|
| -** If SQLite has not been initialized using [sqlite3_initialize()] prior
|
| +** ^(If SQLite has not been initialized using [sqlite3_initialize()] prior
|
| ** to invoking sqlite3_complete16() then sqlite3_initialize() is invoked
|
| ** automatically by sqlite3_complete16(). If that initialization fails,
|
| ** then the return value from sqlite3_complete16() will be non-zero
|
| -** regardless of whether or not the input SQL is complete.
|
| -**
|
| -** Requirements: [H10511] [H10512]
|
| +** regardless of whether or not the input SQL is complete.)^
|
| **
|
| ** The input to [sqlite3_complete()] must be a zero-terminated
|
| ** UTF-8 string.
|
| @@ -1473,27 +1648,27 @@ SQLITE_API int sqlite3_complete(const char *sql);
|
| SQLITE_API int sqlite3_complete16(const void *sql);
|
|
|
| /*
|
| -** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors {H12310} <S40400>
|
| +** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors
|
| **
|
| -** This routine sets a callback function that might be invoked whenever
|
| +** ^This routine sets a callback function that might be invoked whenever
|
| ** an attempt is made to open a database table that another thread
|
| ** or process has locked.
|
| **
|
| -** If the busy callback is NULL, then [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED]
|
| -** is returned immediately upon encountering the lock. If the busy callback
|
| -** is not NULL, then the callback will be invoked with two arguments.
|
| +** ^If the busy callback is NULL, then [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED]
|
| +** is returned immediately upon encountering the lock. ^If the busy callback
|
| +** is not NULL, then the callback might be invoked with two arguments.
|
| **
|
| -** The first argument to the handler is a copy of the void* pointer which
|
| -** is the third argument to sqlite3_busy_handler(). The second argument to
|
| -** the handler callback is the number of times that the busy handler has
|
| -** been invoked for this locking event. If the
|
| +** ^The first argument to the busy handler is a copy of the void* pointer which
|
| +** is the third argument to sqlite3_busy_handler(). ^The second argument to
|
| +** the busy handler callback is the number of times that the busy handler has
|
| +** been invoked for this locking event. ^If the
|
| ** busy callback returns 0, then no additional attempts are made to
|
| ** access the database and [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED] is returned.
|
| -** If the callback returns non-zero, then another attempt
|
| +** ^If the callback returns non-zero, then another attempt
|
| ** is made to open the database for reading and the cycle repeats.
|
| **
|
| ** The presence of a busy handler does not guarantee that it will be invoked
|
| -** when there is lock contention. If SQLite determines that invoking the busy
|
| +** when there is lock contention. ^If SQLite determines that invoking the busy
|
| ** handler could result in a deadlock, it will go ahead and return [SQLITE_BUSY]
|
| ** or [SQLITE_IOERR_BLOCKED] instead of invoking the busy handler.
|
| ** Consider a scenario where one process is holding a read lock that
|
| @@ -1507,65 +1682,62 @@ SQLITE_API int sqlite3_complete16(const void *sql);
|
| ** will induce the first process to release its read lock and allow
|
| ** the second process to proceed.
|
| **
|
| -** The default busy callback is NULL.
|
| +** ^The default busy callback is NULL.
|
| **
|
| -** The [SQLITE_BUSY] error is converted to [SQLITE_IOERR_BLOCKED]
|
| +** ^The [SQLITE_BUSY] error is converted to [SQLITE_IOERR_BLOCKED]
|
| ** when SQLite is in the middle of a large transaction where all the
|
| ** changes will not fit into the in-memory cache. SQLite will
|
| ** already hold a RESERVED lock on the database file, but it needs
|
| ** to promote this lock to EXCLUSIVE so that it can spill cache
|
| ** pages into the database file without harm to concurrent
|
| -** readers. If it is unable to promote the lock, then the in-memory
|
| +** readers. ^If it is unable to promote the lock, then the in-memory
|
| ** cache will be left in an inconsistent state and so the error
|
| ** code is promoted from the relatively benign [SQLITE_BUSY] to
|
| -** the more severe [SQLITE_IOERR_BLOCKED]. This error code promotion
|
| +** the more severe [SQLITE_IOERR_BLOCKED]. ^This error code promotion
|
| ** forces an automatic rollback of the changes. See the
|
| ** <a href="/cvstrac/wiki?p=CorruptionFollowingBusyError">
|
| ** CorruptionFollowingBusyError</a> wiki page for a discussion of why
|
| ** this is important.
|
| **
|
| -** There can only be a single busy handler defined for each
|
| +** ^(There can only be a single busy handler defined for each
|
| ** [database connection]. Setting a new busy handler clears any
|
| -** previously set handler. Note that calling [sqlite3_busy_timeout()]
|
| +** previously set handler.)^ ^Note that calling [sqlite3_busy_timeout()]
|
| ** will also set or clear the busy handler.
|
| **
|
| ** The busy callback should not take any actions which modify the
|
| ** database connection that invoked the busy handler. Any such actions
|
| ** result in undefined behavior.
|
| **
|
| -** Requirements:
|
| -** [H12311] [H12312] [H12314] [H12316] [H12318]
|
| -**
|
| ** A busy handler must not close the database connection
|
| ** or [prepared statement] that invoked the busy handler.
|
| */
|
| SQLITE_API int sqlite3_busy_handler(sqlite3*, int(*)(void*,int), void*);
|
|
|
| /*
|
| -** CAPI3REF: Set A Busy Timeout {H12340} <S40410>
|
| +** CAPI3REF: Set A Busy Timeout
|
| **
|
| -** This routine sets a [sqlite3_busy_handler | busy handler] that sleeps
|
| -** for a specified amount of time when a table is locked. The handler
|
| +** ^This routine sets a [sqlite3_busy_handler | busy handler] that sleeps
|
| +** for a specified amount of time when a table is locked. ^The handler
|
| ** will sleep multiple times until at least "ms" milliseconds of sleeping
|
| -** have accumulated. {H12343} After "ms" milliseconds of sleeping,
|
| +** have accumulated. ^After at least "ms" milliseconds of sleeping,
|
| ** the handler returns 0 which causes [sqlite3_step()] to return
|
| ** [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED].
|
| **
|
| -** Calling this routine with an argument less than or equal to zero
|
| +** ^Calling this routine with an argument less than or equal to zero
|
| ** turns off all busy handlers.
|
| **
|
| -** There can only be a single busy handler for a particular
|
| +** ^(There can only be a single busy handler for a particular
|
| ** [database connection] any any given moment. If another busy handler
|
| ** was defined (using [sqlite3_busy_handler()]) prior to calling
|
| -** this routine, that other busy handler is cleared.
|
| -**
|
| -** Requirements:
|
| -** [H12341] [H12343] [H12344]
|
| +** this routine, that other busy handler is cleared.)^
|
| */
|
| SQLITE_API int sqlite3_busy_timeout(sqlite3*, int ms);
|
|
|
| /*
|
| -** CAPI3REF: Convenience Routines For Running Queries {H12370} <S10000>
|
| +** CAPI3REF: Convenience Routines For Running Queries
|
| +**
|
| +** This is a legacy interface that is preserved for backwards compatibility.
|
| +** Use of this interface is not recommended.
|
| **
|
| ** Definition: A <b>result table</b> is memory data structure created by the
|
| ** [sqlite3_get_table()] interface. A result table records the
|
| @@ -1587,7 +1759,7 @@ SQLITE_API int sqlite3_busy_timeout(sqlite3*, int ms);
|
| ** It is not safe to pass a result table directly to [sqlite3_free()].
|
| ** A result table should be deallocated using [sqlite3_free_table()].
|
| **
|
| -** As an example of the result table format, suppose a query result
|
| +** ^(As an example of the result table format, suppose a query result
|
| ** is as follows:
|
| **
|
| ** <blockquote><pre>
|
| @@ -1611,15 +1783,15 @@ SQLITE_API int sqlite3_busy_timeout(sqlite3*, int ms);
|
| ** azResult[5] = "28";
|
| ** azResult[6] = "Cindy";
|
| ** azResult[7] = "21";
|
| -** </pre></blockquote>
|
| +** </pre></blockquote>)^
|
| **
|
| -** The sqlite3_get_table() function evaluates one or more
|
| +** ^The sqlite3_get_table() function evaluates one or more
|
| ** semicolon-separated SQL statements in the zero-terminated UTF-8
|
| -** string of its 2nd parameter. It returns a result table to the
|
| +** string of its 2nd parameter and returns a result table to the
|
| ** pointer given in its 3rd parameter.
|
| **
|
| -** After the calling function has finished using the result, it should
|
| -** pass the pointer to the result table to sqlite3_free_table() in order to
|
| +** After the application has finished with the result from sqlite3_get_table(),
|
| +** it must pass the result table pointer to sqlite3_free_table() in order to
|
| ** release the memory that was malloced. Because of the way the
|
| ** [sqlite3_malloc()] happens within sqlite3_get_table(), the calling
|
| ** function must not try to call [sqlite3_free()] directly. Only
|
| @@ -1630,10 +1802,8 @@ SQLITE_API int sqlite3_busy_timeout(sqlite3*, int ms);
|
| ** to any internal data structures of SQLite. It uses only the public
|
| ** interface defined here. As a consequence, errors that occur in the
|
| ** wrapper layer outside of the internal [sqlite3_exec()] call are not
|
| -** reflected in subsequent calls to [sqlite3_errcode()] or [sqlite3_errmsg()].
|
| -**
|
| -** Requirements:
|
| -** [H12371] [H12373] [H12374] [H12376] [H12379] [H12382]
|
| +** reflected in subsequent calls to [sqlite3_errcode()] or
|
| +** [sqlite3_errmsg()].
|
| */
|
| SQLITE_API int sqlite3_get_table(
|
| sqlite3 *db, /* An open database */
|
| @@ -1646,33 +1816,33 @@ SQLITE_API int sqlite3_get_table(
|
| SQLITE_API void sqlite3_free_table(char **result);
|
|
|
| /*
|
| -** CAPI3REF: Formatted String Printing Functions {H17400} <S70000><S20000>
|
| +** CAPI3REF: Formatted String Printing Functions
|
| **
|
| ** These routines are work-alikes of the "printf()" family of functions
|
| ** from the standard C library.
|
| **
|
| -** The sqlite3_mprintf() and sqlite3_vmprintf() routines write their
|
| +** ^The sqlite3_mprintf() and sqlite3_vmprintf() routines write their
|
| ** results into memory obtained from [sqlite3_malloc()].
|
| ** The strings returned by these two routines should be
|
| -** released by [sqlite3_free()]. Both routines return a
|
| +** released by [sqlite3_free()]. ^Both routines return a
|
| ** NULL pointer if [sqlite3_malloc()] is unable to allocate enough
|
| ** memory to hold the resulting string.
|
| **
|
| -** In sqlite3_snprintf() routine is similar to "snprintf()" from
|
| +** ^(In sqlite3_snprintf() routine is similar to "snprintf()" from
|
| ** the standard C library. The result is written into the
|
| ** buffer supplied as the second parameter whose size is given by
|
| ** the first parameter. Note that the order of the
|
| -** first two parameters is reversed from snprintf(). This is an
|
| +** first two parameters is reversed from snprintf().)^ This is an
|
| ** historical accident that cannot be fixed without breaking
|
| -** backwards compatibility. Note also that sqlite3_snprintf()
|
| +** backwards compatibility. ^(Note also that sqlite3_snprintf()
|
| ** returns a pointer to its buffer instead of the number of
|
| -** characters actually written into the buffer. We admit that
|
| +** characters actually written into the buffer.)^ We admit that
|
| ** the number of characters written would be a more useful return
|
| ** value but we cannot change the implementation of sqlite3_snprintf()
|
| ** now without breaking compatibility.
|
| **
|
| -** As long as the buffer size is greater than zero, sqlite3_snprintf()
|
| -** guarantees that the buffer is always zero-terminated. The first
|
| +** ^As long as the buffer size is greater than zero, sqlite3_snprintf()
|
| +** guarantees that the buffer is always zero-terminated. ^The first
|
| ** parameter "n" is the total size of the buffer, including space for
|
| ** the zero terminator. So the longest string that can be completely
|
| ** written will be n-1 characters.
|
| @@ -1682,9 +1852,9 @@ SQLITE_API void sqlite3_free_table(char **result);
|
| ** All of the usual printf() formatting options apply. In addition, there
|
| ** is are "%q", "%Q", and "%z" options.
|
| **
|
| -** The %q option works like %s in that it substitutes a null-terminated
|
| +** ^(The %q option works like %s in that it substitutes a null-terminated
|
| ** string from the argument list. But %q also doubles every '\'' character.
|
| -** %q is designed for use inside a string literal. By doubling each '\''
|
| +** %q is designed for use inside a string literal.)^ By doubling each '\''
|
| ** character it escapes that character and allows it to be inserted into
|
| ** the string.
|
| **
|
| @@ -1719,10 +1889,10 @@ SQLITE_API void sqlite3_free_table(char **result);
|
| ** This second example is an SQL syntax error. As a general rule you should
|
| ** always use %q instead of %s when inserting text into a string literal.
|
| **
|
| -** The %Q option works like %q except it also adds single quotes around
|
| +** ^(The %Q option works like %q except it also adds single quotes around
|
| ** the outside of the total string. Additionally, if the parameter in the
|
| ** argument list is a NULL pointer, %Q substitutes the text "NULL" (without
|
| -** single quotes) in place of the %Q option. So, for example, one could say:
|
| +** single quotes).)^ So, for example, one could say:
|
| **
|
| ** <blockquote><pre>
|
| ** char *zSQL = sqlite3_mprintf("INSERT INTO table VALUES(%Q)", zText);
|
| @@ -1733,35 +1903,32 @@ SQLITE_API void sqlite3_free_table(char **result);
|
| ** The code above will render a correct SQL statement in the zSQL
|
| ** variable even if the zText variable is a NULL pointer.
|
| **
|
| -** The "%z" formatting option works exactly like "%s" with the
|
| +** ^(The "%z" formatting option works like "%s" but with the
|
| ** addition that after the string has been read and copied into
|
| -** the result, [sqlite3_free()] is called on the input string. {END}
|
| -**
|
| -** Requirements:
|
| -** [H17403] [H17406] [H17407]
|
| +** the result, [sqlite3_free()] is called on the input string.)^
|
| */
|
| SQLITE_API char *sqlite3_mprintf(const char*,...);
|
| SQLITE_API char *sqlite3_vmprintf(const char*, va_list);
|
| SQLITE_API char *sqlite3_snprintf(int,char*,const char*, ...);
|
|
|
| /*
|
| -** CAPI3REF: Memory Allocation Subsystem {H17300} <S20000>
|
| +** CAPI3REF: Memory Allocation Subsystem
|
| **
|
| -** The SQLite core uses these three routines for all of its own
|
| +** The SQLite core uses these three routines for all of its own
|
| ** internal memory allocation needs. "Core" in the previous sentence
|
| ** does not include operating-system specific VFS implementation. The
|
| ** Windows VFS uses native malloc() and free() for some operations.
|
| **
|
| -** The sqlite3_malloc() routine returns a pointer to a block
|
| +** ^The sqlite3_malloc() routine returns a pointer to a block
|
| ** of memory at least N bytes in length, where N is the parameter.
|
| -** If sqlite3_malloc() is unable to obtain sufficient free
|
| -** memory, it returns a NULL pointer. If the parameter N to
|
| +** ^If sqlite3_malloc() is unable to obtain sufficient free
|
| +** memory, it returns a NULL pointer. ^If the parameter N to
|
| ** sqlite3_malloc() is zero or negative then sqlite3_malloc() returns
|
| ** a NULL pointer.
|
| **
|
| -** Calling sqlite3_free() with a pointer previously returned
|
| +** ^Calling sqlite3_free() with a pointer previously returned
|
| ** by sqlite3_malloc() or sqlite3_realloc() releases that memory so
|
| -** that it might be reused. The sqlite3_free() routine is
|
| +** that it might be reused. ^The sqlite3_free() routine is
|
| ** a no-op if is called with a NULL pointer. Passing a NULL pointer
|
| ** to sqlite3_free() is harmless. After being freed, memory
|
| ** should neither be read nor written. Even reading previously freed
|
| @@ -1770,34 +1937,27 @@ SQLITE_API char *sqlite3_snprintf(int,char*,const char*, ...);
|
| ** might result if sqlite3_free() is called with a non-NULL pointer that
|
| ** was not obtained from sqlite3_malloc() or sqlite3_realloc().
|
| **
|
| -** The sqlite3_realloc() interface attempts to resize a
|
| +** ^(The sqlite3_realloc() interface attempts to resize a
|
| ** prior memory allocation to be at least N bytes, where N is the
|
| ** second parameter. The memory allocation to be resized is the first
|
| -** parameter. If the first parameter to sqlite3_realloc()
|
| +** parameter.)^ ^ If the first parameter to sqlite3_realloc()
|
| ** is a NULL pointer then its behavior is identical to calling
|
| ** sqlite3_malloc(N) where N is the second parameter to sqlite3_realloc().
|
| -** If the second parameter to sqlite3_realloc() is zero or
|
| +** ^If the second parameter to sqlite3_realloc() is zero or
|
| ** negative then the behavior is exactly the same as calling
|
| ** sqlite3_free(P) where P is the first parameter to sqlite3_realloc().
|
| -** sqlite3_realloc() returns a pointer to a memory allocation
|
| +** ^sqlite3_realloc() returns a pointer to a memory allocation
|
| ** of at least N bytes in size or NULL if sufficient memory is unavailable.
|
| -** If M is the size of the prior allocation, then min(N,M) bytes
|
| +** ^If M is the size of the prior allocation, then min(N,M) bytes
|
| ** of the prior allocation are copied into the beginning of buffer returned
|
| ** by sqlite3_realloc() and the prior allocation is freed.
|
| -** If sqlite3_realloc() returns NULL, then the prior allocation
|
| +** ^If sqlite3_realloc() returns NULL, then the prior allocation
|
| ** is not freed.
|
| **
|
| -** The memory returned by sqlite3_malloc() and sqlite3_realloc()
|
| -** is always aligned to at least an 8 byte boundary. {END}
|
| -**
|
| -** The default implementation of the memory allocation subsystem uses
|
| -** the malloc(), realloc() and free() provided by the standard C library.
|
| -** {H17382} However, if SQLite is compiled with the
|
| -** SQLITE_MEMORY_SIZE=<i>NNN</i> C preprocessor macro (where <i>NNN</i>
|
| -** is an integer), then SQLite create a static array of at least
|
| -** <i>NNN</i> bytes in size and uses that array for all of its dynamic
|
| -** memory allocation needs. {END} Additional memory allocator options
|
| -** may be added in future releases.
|
| +** ^The memory returned by sqlite3_malloc() and sqlite3_realloc()
|
| +** is always aligned to at least an 8 byte boundary, or to a
|
| +** 4 byte boundary if the [SQLITE_4_BYTE_ALIGNED_MALLOC] compile-time
|
| +** option is used.
|
| **
|
| ** In SQLite version 3.5.0 and 3.5.1, it was possible to define
|
| ** the SQLITE_OMIT_MEMORY_ALLOCATION which would cause the built-in
|
| @@ -1812,10 +1972,6 @@ SQLITE_API char *sqlite3_snprintf(int,char*,const char*, ...);
|
| ** they are reported back as [SQLITE_CANTOPEN] or
|
| ** [SQLITE_IOERR] rather than [SQLITE_NOMEM].
|
| **
|
| -** Requirements:
|
| -** [H17303] [H17304] [H17305] [H17306] [H17310] [H17312] [H17315] [H17318]
|
| -** [H17321] [H17322] [H17323]
|
| -**
|
| ** The pointer arguments to [sqlite3_free()] and [sqlite3_realloc()]
|
| ** must be either NULL or else pointers obtained from a prior
|
| ** invocation of [sqlite3_malloc()] or [sqlite3_realloc()] that have
|
| @@ -1830,20 +1986,33 @@ SQLITE_API void *sqlite3_realloc(void*, int);
|
| SQLITE_API void sqlite3_free(void*);
|
|
|
| /*
|
| -** CAPI3REF: Memory Allocator Statistics {H17370} <S30210>
|
| +** CAPI3REF: Memory Allocator Statistics
|
| **
|
| ** SQLite provides these two interfaces for reporting on the status
|
| ** of the [sqlite3_malloc()], [sqlite3_free()], and [sqlite3_realloc()]
|
| ** routines, which form the built-in memory allocation subsystem.
|
| **
|
| -** Requirements:
|
| -** [H17371] [H17373] [H17374] [H17375]
|
| +** ^The [sqlite3_memory_used()] routine returns the number of bytes
|
| +** of memory currently outstanding (malloced but not freed).
|
| +** ^The [sqlite3_memory_highwater()] routine returns the maximum
|
| +** value of [sqlite3_memory_used()] since the high-water mark
|
| +** was last reset. ^The values returned by [sqlite3_memory_used()] and
|
| +** [sqlite3_memory_highwater()] include any overhead
|
| +** added by SQLite in its implementation of [sqlite3_malloc()],
|
| +** but not overhead added by the any underlying system library
|
| +** routines that [sqlite3_malloc()] may call.
|
| +**
|
| +** ^The memory high-water mark is reset to the current value of
|
| +** [sqlite3_memory_used()] if and only if the parameter to
|
| +** [sqlite3_memory_highwater()] is true. ^The value returned
|
| +** by [sqlite3_memory_highwater(1)] is the high-water mark
|
| +** prior to the reset.
|
| */
|
| SQLITE_API sqlite3_int64 sqlite3_memory_used(void);
|
| SQLITE_API sqlite3_int64 sqlite3_memory_highwater(int resetFlag);
|
|
|
| /*
|
| -** CAPI3REF: Pseudo-Random Number Generator {H17390} <S20000>
|
| +** CAPI3REF: Pseudo-Random Number Generator
|
| **
|
| ** SQLite contains a high-quality pseudo-random number generator (PRNG) used to
|
| ** select random [ROWID | ROWIDs] when inserting new records into a table that
|
| @@ -1851,60 +2020,57 @@ SQLITE_API sqlite3_int64 sqlite3_memory_highwater(int resetFlag);
|
| ** the build-in random() and randomblob() SQL functions. This interface allows
|
| ** applications to access the same PRNG for other purposes.
|
| **
|
| -** A call to this routine stores N bytes of randomness into buffer P.
|
| +** ^A call to this routine stores N bytes of randomness into buffer P.
|
| **
|
| -** The first time this routine is invoked (either internally or by
|
| +** ^The first time this routine is invoked (either internally or by
|
| ** the application) the PRNG is seeded using randomness obtained
|
| ** from the xRandomness method of the default [sqlite3_vfs] object.
|
| -** On all subsequent invocations, the pseudo-randomness is generated
|
| +** ^On all subsequent invocations, the pseudo-randomness is generated
|
| ** internally and without recourse to the [sqlite3_vfs] xRandomness
|
| ** method.
|
| -**
|
| -** Requirements:
|
| -** [H17392]
|
| */
|
| SQLITE_API void sqlite3_randomness(int N, void *P);
|
|
|
| /*
|
| -** CAPI3REF: Compile-Time Authorization Callbacks {H12500} <S70100>
|
| +** CAPI3REF: Compile-Time Authorization Callbacks
|
| **
|
| -** This routine registers a authorizer callback with a particular
|
| +** ^This routine registers a authorizer callback with a particular
|
| ** [database connection], supplied in the first argument.
|
| -** The authorizer callback is invoked as SQL statements are being compiled
|
| +** ^The authorizer callback is invoked as SQL statements are being compiled
|
| ** by [sqlite3_prepare()] or its variants [sqlite3_prepare_v2()],
|
| -** [sqlite3_prepare16()] and [sqlite3_prepare16_v2()]. At various
|
| +** [sqlite3_prepare16()] and [sqlite3_prepare16_v2()]. ^At various
|
| ** points during the compilation process, as logic is being created
|
| ** to perform various actions, the authorizer callback is invoked to
|
| -** see if those actions are allowed. The authorizer callback should
|
| +** see if those actions are allowed. ^The authorizer callback should
|
| ** return [SQLITE_OK] to allow the action, [SQLITE_IGNORE] to disallow the
|
| ** specific action but allow the SQL statement to continue to be
|
| ** compiled, or [SQLITE_DENY] to cause the entire SQL statement to be
|
| -** rejected with an error. If the authorizer callback returns
|
| +** rejected with an error. ^If the authorizer callback returns
|
| ** any value other than [SQLITE_IGNORE], [SQLITE_OK], or [SQLITE_DENY]
|
| ** then the [sqlite3_prepare_v2()] or equivalent call that triggered
|
| ** the authorizer will fail with an error message.
|
| **
|
| ** When the callback returns [SQLITE_OK], that means the operation
|
| -** requested is ok. When the callback returns [SQLITE_DENY], the
|
| +** requested is ok. ^When the callback returns [SQLITE_DENY], the
|
| ** [sqlite3_prepare_v2()] or equivalent call that triggered the
|
| ** authorizer will fail with an error message explaining that
|
| ** access is denied.
|
| **
|
| -** The first parameter to the authorizer callback is a copy of the third
|
| -** parameter to the sqlite3_set_authorizer() interface. The second parameter
|
| +** ^The first parameter to the authorizer callback is a copy of the third
|
| +** parameter to the sqlite3_set_authorizer() interface. ^The second parameter
|
| ** to the callback is an integer [SQLITE_COPY | action code] that specifies
|
| -** the particular action to be authorized. The third through sixth parameters
|
| +** the particular action to be authorized. ^The third through sixth parameters
|
| ** to the callback are zero-terminated strings that contain additional
|
| ** details about the action to be authorized.
|
| **
|
| -** If the action code is [SQLITE_READ]
|
| +** ^If the action code is [SQLITE_READ]
|
| ** and the callback returns [SQLITE_IGNORE] then the
|
| ** [prepared statement] statement is constructed to substitute
|
| ** a NULL value in place of the table column that would have
|
| ** been read if [SQLITE_OK] had been returned. The [SQLITE_IGNORE]
|
| ** return can be used to deny an untrusted user access to individual
|
| ** columns of a table.
|
| -** If the action code is [SQLITE_DELETE] and the callback returns
|
| +** ^If the action code is [SQLITE_DELETE] and the callback returns
|
| ** [SQLITE_IGNORE] then the [DELETE] operation proceeds but the
|
| ** [truncate optimization] is disabled and all rows are deleted individually.
|
| **
|
| @@ -1924,9 +2090,9 @@ SQLITE_API void sqlite3_randomness(int N, void *P);
|
| ** and limiting database size using the [max_page_count] [PRAGMA]
|
| ** in addition to using an authorizer.
|
| **
|
| -** Only a single authorizer can be in place on a database connection
|
| +** ^(Only a single authorizer can be in place on a database connection
|
| ** at a time. Each call to sqlite3_set_authorizer overrides the
|
| -** previous call. Disable the authorizer by installing a NULL callback.
|
| +** previous call.)^ ^Disable the authorizer by installing a NULL callback.
|
| ** The authorizer is disabled by default.
|
| **
|
| ** The authorizer callback must not do anything that will modify
|
| @@ -1934,20 +2100,16 @@ SQLITE_API void sqlite3_randomness(int N, void *P);
|
| ** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their
|
| ** database connections for the meaning of "modify" in this paragraph.
|
| **
|
| -** When [sqlite3_prepare_v2()] is used to prepare a statement, the
|
| +** ^When [sqlite3_prepare_v2()] is used to prepare a statement, the
|
| ** statement might be re-prepared during [sqlite3_step()] due to a
|
| ** schema change. Hence, the application should ensure that the
|
| ** correct authorizer callback remains in place during the [sqlite3_step()].
|
| **
|
| -** Note that the authorizer callback is invoked only during
|
| +** ^Note that the authorizer callback is invoked only during
|
| ** [sqlite3_prepare()] or its variants. Authorization is not
|
| ** performed during statement evaluation in [sqlite3_step()], unless
|
| ** as stated in the previous paragraph, sqlite3_step() invokes
|
| ** sqlite3_prepare_v2() to reprepare a statement after a schema change.
|
| -**
|
| -** Requirements:
|
| -** [H12501] [H12502] [H12503] [H12504] [H12505] [H12506] [H12507] [H12510]
|
| -** [H12511] [H12512] [H12520] [H12521] [H12522]
|
| */
|
| SQLITE_API int sqlite3_set_authorizer(
|
| sqlite3*,
|
| @@ -1956,7 +2118,7 @@ SQLITE_API int sqlite3_set_authorizer(
|
| );
|
|
|
| /*
|
| -** CAPI3REF: Authorizer Return Codes {H12590} <H12500>
|
| +** CAPI3REF: Authorizer Return Codes
|
| **
|
| ** The [sqlite3_set_authorizer | authorizer callback function] must
|
| ** return either [SQLITE_OK] or one of these two constants in order
|
| @@ -1968,7 +2130,7 @@ SQLITE_API int sqlite3_set_authorizer(
|
| #define SQLITE_IGNORE 2 /* Don't allow access, but don't generate an error */
|
|
|
| /*
|
| -** CAPI3REF: Authorizer Action Codes {H12550} <H12500>
|
| +** CAPI3REF: Authorizer Action Codes
|
| **
|
| ** The [sqlite3_set_authorizer()] interface registers a callback function
|
| ** that is invoked to authorize certain SQL statement actions. The
|
| @@ -1979,15 +2141,12 @@ SQLITE_API int sqlite3_set_authorizer(
|
| ** These action code values signify what kind of operation is to be
|
| ** authorized. The 3rd and 4th parameters to the authorization
|
| ** callback function will be parameters or NULL depending on which of these
|
| -** codes is used as the second parameter. The 5th parameter to the
|
| +** codes is used as the second parameter. ^(The 5th parameter to the
|
| ** authorizer callback is the name of the database ("main", "temp",
|
| -** etc.) if applicable. The 6th parameter to the authorizer callback
|
| +** etc.) if applicable.)^ ^The 6th parameter to the authorizer callback
|
| ** is the name of the inner-most trigger or view that is responsible for
|
| ** the access attempt or NULL if this access attempt is directly from
|
| ** top-level SQL code.
|
| -**
|
| -** Requirements:
|
| -** [H12551] [H12552] [H12553] [H12554]
|
| */
|
| /******************************************* 3rd ************ 4th ***********/
|
| #define SQLITE_CREATE_INDEX 1 /* Index Name Table Name */
|
| @@ -2025,72 +2184,83 @@ SQLITE_API int sqlite3_set_authorizer(
|
| #define SQLITE_COPY 0 /* No longer used */
|
|
|
| /*
|
| -** CAPI3REF: Tracing And Profiling Functions {H12280} <S60400>
|
| -** EXPERIMENTAL
|
| +** CAPI3REF: Tracing And Profiling Functions
|
| **
|
| ** These routines register callback functions that can be used for
|
| ** tracing and profiling the execution of SQL statements.
|
| **
|
| -** The callback function registered by sqlite3_trace() is invoked at
|
| +** ^The callback function registered by sqlite3_trace() is invoked at
|
| ** various times when an SQL statement is being run by [sqlite3_step()].
|
| -** The callback returns a UTF-8 rendering of the SQL statement text
|
| -** as the statement first begins executing. Additional callbacks occur
|
| +** ^The sqlite3_trace() callback is invoked with a UTF-8 rendering of the
|
| +** SQL statement text as the statement first begins executing.
|
| +** ^(Additional sqlite3_trace() callbacks might occur
|
| ** as each triggered subprogram is entered. The callbacks for triggers
|
| -** contain a UTF-8 SQL comment that identifies the trigger.
|
| +** contain a UTF-8 SQL comment that identifies the trigger.)^
|
| **
|
| -** The callback function registered by sqlite3_profile() is invoked
|
| -** as each SQL statement finishes. The profile callback contains
|
| +** ^The callback function registered by sqlite3_profile() is invoked
|
| +** as each SQL statement finishes. ^The profile callback contains
|
| ** the original statement text and an estimate of wall-clock time
|
| -** of how long that statement took to run.
|
| -**
|
| -** Requirements:
|
| -** [H12281] [H12282] [H12283] [H12284] [H12285] [H12287] [H12288] [H12289]
|
| -** [H12290]
|
| -*/
|
| -SQLITE_API SQLITE_EXPERIMENTAL void *sqlite3_trace(sqlite3*, void(*xTrace)(void*,const char*), void*);
|
| +** of how long that statement took to run. ^The profile callback
|
| +** time is in units of nanoseconds, however the current implementation
|
| +** is only capable of millisecond resolution so the six least significant
|
| +** digits in the time are meaningless. Future versions of SQLite
|
| +** might provide greater resolution on the profiler callback. The
|
| +** sqlite3_profile() function is considered experimental and is
|
| +** subject to change in future versions of SQLite.
|
| +*/
|
| +SQLITE_API void *sqlite3_trace(sqlite3*, void(*xTrace)(void*,const char*), void*);
|
| SQLITE_API SQLITE_EXPERIMENTAL void *sqlite3_profile(sqlite3*,
|
| void(*xProfile)(void*,const char*,sqlite3_uint64), void*);
|
|
|
| /*
|
| -** CAPI3REF: Query Progress Callbacks {H12910} <S60400>
|
| +** CAPI3REF: Query Progress Callbacks
|
| **
|
| -** This routine configures a callback function - the
|
| -** progress callback - that is invoked periodically during long
|
| -** running calls to [sqlite3_exec()], [sqlite3_step()] and
|
| -** [sqlite3_get_table()]. An example use for this
|
| +** ^The sqlite3_progress_handler(D,N,X,P) interface causes the callback
|
| +** function X to be invoked periodically during long running calls to
|
| +** [sqlite3_exec()], [sqlite3_step()] and [sqlite3_get_table()] for
|
| +** database connection D. An example use for this
|
| ** interface is to keep a GUI updated during a large query.
|
| **
|
| -** If the progress callback returns non-zero, the operation is
|
| +** ^The parameter P is passed through as the only parameter to the
|
| +** callback function X. ^The parameter N is the number of
|
| +** [virtual machine instructions] that are evaluated between successive
|
| +** invocations of the callback X.
|
| +**
|
| +** ^Only a single progress handler may be defined at one time per
|
| +** [database connection]; setting a new progress handler cancels the
|
| +** old one. ^Setting parameter X to NULL disables the progress handler.
|
| +** ^The progress handler is also disabled by setting N to a value less
|
| +** than 1.
|
| +**
|
| +** ^If the progress callback returns non-zero, the operation is
|
| ** interrupted. This feature can be used to implement a
|
| ** "Cancel" button on a GUI progress dialog box.
|
| **
|
| -** The progress handler must not do anything that will modify
|
| +** The progress handler callback must not do anything that will modify
|
| ** the database connection that invoked the progress handler.
|
| ** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their
|
| ** database connections for the meaning of "modify" in this paragraph.
|
| **
|
| -** Requirements:
|
| -** [H12911] [H12912] [H12913] [H12914] [H12915] [H12916] [H12917] [H12918]
|
| -**
|
| */
|
| SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
|
|
|
| /*
|
| -** CAPI3REF: Opening A New Database Connection {H12700} <S40200>
|
| +** CAPI3REF: Opening A New Database Connection
|
| **
|
| -** These routines open an SQLite database file whose name is given by the
|
| -** filename argument. The filename argument is interpreted as UTF-8 for
|
| +** ^These routines open an SQLite database file whose name is given by the
|
| +** filename argument. ^The filename argument is interpreted as UTF-8 for
|
| ** sqlite3_open() and sqlite3_open_v2() and as UTF-16 in the native byte
|
| -** order for sqlite3_open16(). A [database connection] handle is usually
|
| +** order for sqlite3_open16(). ^(A [database connection] handle is usually
|
| ** returned in *ppDb, even if an error occurs. The only exception is that
|
| ** if SQLite is unable to allocate memory to hold the [sqlite3] object,
|
| ** a NULL will be written into *ppDb instead of a pointer to the [sqlite3]
|
| -** object. If the database is opened (and/or created) successfully, then
|
| -** [SQLITE_OK] is returned. Otherwise an [error code] is returned. The
|
| +** object.)^ ^(If the database is opened (and/or created) successfully, then
|
| +** [SQLITE_OK] is returned. Otherwise an [error code] is returned.)^ ^The
|
| ** [sqlite3_errmsg()] or [sqlite3_errmsg16()] routines can be used to obtain
|
| -** an English language description of the error.
|
| +** an English language description of the error following a failure of any
|
| +** of the sqlite3_open() routines.
|
| **
|
| -** The default encoding for the database will be UTF-8 if
|
| +** ^The default encoding for the database will be UTF-8 if
|
| ** sqlite3_open() or sqlite3_open_v2() is called and
|
| ** UTF-16 in the native byte order if sqlite3_open16() is used.
|
| **
|
| @@ -2100,60 +2270,61 @@ SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
|
| **
|
| ** The sqlite3_open_v2() interface works like sqlite3_open()
|
| ** except that it accepts two additional parameters for additional control
|
| -** over the new database connection. The flags parameter can take one of
|
| +** over the new database connection. ^(The flags parameter to
|
| +** sqlite3_open_v2() can take one of
|
| ** the following three values, optionally combined with the
|
| ** [SQLITE_OPEN_NOMUTEX], [SQLITE_OPEN_FULLMUTEX], [SQLITE_OPEN_SHAREDCACHE],
|
| -** and/or [SQLITE_OPEN_PRIVATECACHE] flags:
|
| +** and/or [SQLITE_OPEN_PRIVATECACHE] flags:)^
|
| **
|
| ** <dl>
|
| -** <dt>[SQLITE_OPEN_READONLY]</dt>
|
| +** ^(<dt>[SQLITE_OPEN_READONLY]</dt>
|
| ** <dd>The database is opened in read-only mode. If the database does not
|
| -** already exist, an error is returned.</dd>
|
| +** already exist, an error is returned.</dd>)^
|
| **
|
| -** <dt>[SQLITE_OPEN_READWRITE]</dt>
|
| +** ^(<dt>[SQLITE_OPEN_READWRITE]</dt>
|
| ** <dd>The database is opened for reading and writing if possible, or reading
|
| ** only if the file is write protected by the operating system. In either
|
| -** case the database must already exist, otherwise an error is returned.</dd>
|
| +** case the database must already exist, otherwise an error is returned.</dd>)^
|
| **
|
| -** <dt>[SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE]</dt>
|
| +** ^(<dt>[SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE]</dt>
|
| ** <dd>The database is opened for reading and writing, and is creates it if
|
| ** it does not already exist. This is the behavior that is always used for
|
| -** sqlite3_open() and sqlite3_open16().</dd>
|
| +** sqlite3_open() and sqlite3_open16().</dd>)^
|
| ** </dl>
|
| **
|
| ** If the 3rd parameter to sqlite3_open_v2() is not one of the
|
| ** combinations shown above or one of the combinations shown above combined
|
| ** with the [SQLITE_OPEN_NOMUTEX], [SQLITE_OPEN_FULLMUTEX],
|
| -** [SQLITE_OPEN_SHAREDCACHE] and/or [SQLITE_OPEN_SHAREDCACHE] flags,
|
| +** [SQLITE_OPEN_SHAREDCACHE] and/or [SQLITE_OPEN_PRIVATECACHE] flags,
|
| ** then the behavior is undefined.
|
| **
|
| -** If the [SQLITE_OPEN_NOMUTEX] flag is set, then the database connection
|
| +** ^If the [SQLITE_OPEN_NOMUTEX] flag is set, then the database connection
|
| ** opens in the multi-thread [threading mode] as long as the single-thread
|
| -** mode has not been set at compile-time or start-time. If the
|
| +** mode has not been set at compile-time or start-time. ^If the
|
| ** [SQLITE_OPEN_FULLMUTEX] flag is set then the database connection opens
|
| ** in the serialized [threading mode] unless single-thread was
|
| ** previously selected at compile-time or start-time.
|
| -** The [SQLITE_OPEN_SHAREDCACHE] flag causes the database connection to be
|
| +** ^The [SQLITE_OPEN_SHAREDCACHE] flag causes the database connection to be
|
| ** eligible to use [shared cache mode], regardless of whether or not shared
|
| -** cache is enabled using [sqlite3_enable_shared_cache()]. The
|
| +** cache is enabled using [sqlite3_enable_shared_cache()]. ^The
|
| ** [SQLITE_OPEN_PRIVATECACHE] flag causes the database connection to not
|
| ** participate in [shared cache mode] even if it is enabled.
|
| **
|
| -** If the filename is ":memory:", then a private, temporary in-memory database
|
| -** is created for the connection. This in-memory database will vanish when
|
| +** ^If the filename is ":memory:", then a private, temporary in-memory database
|
| +** is created for the connection. ^This in-memory database will vanish when
|
| ** the database connection is closed. Future versions of SQLite might
|
| ** make use of additional special filenames that begin with the ":" character.
|
| ** It is recommended that when a database filename actually does begin with
|
| ** a ":" character you should prefix the filename with a pathname such as
|
| ** "./" to avoid ambiguity.
|
| **
|
| -** If the filename is an empty string, then a private, temporary
|
| -** on-disk database will be created. This private database will be
|
| +** ^If the filename is an empty string, then a private, temporary
|
| +** on-disk database will be created. ^This private database will be
|
| ** automatically deleted as soon as the database connection is closed.
|
| **
|
| -** The fourth parameter to sqlite3_open_v2() is the name of the
|
| +** ^The fourth parameter to sqlite3_open_v2() is the name of the
|
| ** [sqlite3_vfs] object that defines the operating system interface that
|
| -** the new database connection should use. If the fourth parameter is
|
| +** the new database connection should use. ^If the fourth parameter is
|
| ** a NULL pointer then the default [sqlite3_vfs] object is used.
|
| **
|
| ** <b>Note to Windows users:</b> The encoding used for the filename argument
|
| @@ -2161,10 +2332,6 @@ SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
|
| ** codepage is currently defined. Filenames containing international
|
| ** characters must be converted to UTF-8 prior to passing them into
|
| ** sqlite3_open() or sqlite3_open_v2().
|
| -**
|
| -** Requirements:
|
| -** [H12701] [H12702] [H12703] [H12704] [H12706] [H12707] [H12709] [H12711]
|
| -** [H12712] [H12713] [H12714] [H12717] [H12719] [H12721] [H12723]
|
| */
|
| SQLITE_API int sqlite3_open(
|
| const char *filename, /* Database filename (UTF-8) */
|
| @@ -2182,23 +2349,23 @@ SQLITE_API int sqlite3_open_v2(
|
| );
|
|
|
| /*
|
| -** CAPI3REF: Error Codes And Messages {H12800} <S60200>
|
| +** CAPI3REF: Error Codes And Messages
|
| **
|
| -** The sqlite3_errcode() interface returns the numeric [result code] or
|
| +** ^The sqlite3_errcode() interface returns the numeric [result code] or
|
| ** [extended result code] for the most recent failed sqlite3_* API call
|
| ** associated with a [database connection]. If a prior API call failed
|
| ** but the most recent API call succeeded, the return value from
|
| -** sqlite3_errcode() is undefined. The sqlite3_extended_errcode()
|
| +** sqlite3_errcode() is undefined. ^The sqlite3_extended_errcode()
|
| ** interface is the same except that it always returns the
|
| ** [extended result code] even when extended result codes are
|
| ** disabled.
|
| **
|
| -** The sqlite3_errmsg() and sqlite3_errmsg16() return English-language
|
| +** ^The sqlite3_errmsg() and sqlite3_errmsg16() return English-language
|
| ** text that describes the error, as either UTF-8 or UTF-16 respectively.
|
| -** Memory to hold the error message string is managed internally.
|
| +** ^(Memory to hold the error message string is managed internally.
|
| ** The application does not need to worry about freeing the result.
|
| ** However, the error string might be overwritten or deallocated by
|
| -** subsequent calls to other SQLite interface functions.
|
| +** subsequent calls to other SQLite interface functions.)^
|
| **
|
| ** When the serialized [threading mode] is in use, it might be the
|
| ** case that a second error occurs on a separate thread in between
|
| @@ -2213,9 +2380,6 @@ SQLITE_API int sqlite3_open_v2(
|
| ** If an interface fails with SQLITE_MISUSE, that means the interface
|
| ** was invoked incorrectly by the application. In that case, the
|
| ** error code and message may or may not be set.
|
| -**
|
| -** Requirements:
|
| -** [H12801] [H12802] [H12803] [H12807] [H12808] [H12809]
|
| */
|
| SQLITE_API int sqlite3_errcode(sqlite3 *db);
|
| SQLITE_API int sqlite3_extended_errcode(sqlite3 *db);
|
| @@ -2223,7 +2387,7 @@ SQLITE_API const char *sqlite3_errmsg(sqlite3*);
|
| SQLITE_API const void *sqlite3_errmsg16(sqlite3*);
|
|
|
| /*
|
| -** CAPI3REF: SQL Statement Object {H13000} <H13010>
|
| +** CAPI3REF: SQL Statement Object
|
| ** KEYWORDS: {prepared statement} {prepared statements}
|
| **
|
| ** An instance of this object represents a single SQL statement.
|
| @@ -2249,25 +2413,30 @@ SQLITE_API const void *sqlite3_errmsg16(sqlite3*);
|
| typedef struct sqlite3_stmt sqlite3_stmt;
|
|
|
| /*
|
| -** CAPI3REF: Run-time Limits {H12760} <S20600>
|
| +** CAPI3REF: Run-time Limits
|
| **
|
| -** This interface allows the size of various constructs to be limited
|
| +** ^(This interface allows the size of various constructs to be limited
|
| ** on a connection by connection basis. The first parameter is the
|
| ** [database connection] whose limit is to be set or queried. The
|
| ** second parameter is one of the [limit categories] that define a
|
| ** class of constructs to be size limited. The third parameter is the
|
| -** new limit for that construct. The function returns the old limit.
|
| +** new limit for that construct.)^
|
| **
|
| -** If the new limit is a negative number, the limit is unchanged.
|
| -** For the limit category of SQLITE_LIMIT_XYZ there is a
|
| +** ^If the new limit is a negative number, the limit is unchanged.
|
| +** ^(For each limit category SQLITE_LIMIT_<i>NAME</i> there is a
|
| ** [limits | hard upper bound]
|
| -** set by a compile-time C preprocessor macro named
|
| -** [limits | SQLITE_MAX_XYZ].
|
| -** (The "_LIMIT_" in the name is changed to "_MAX_".)
|
| -** Attempts to increase a limit above its hard upper bound are
|
| -** silently truncated to the hard upper limit.
|
| -**
|
| -** Run time limits are intended for use in applications that manage
|
| +** set at compile-time by a C preprocessor macro called
|
| +** [limits | SQLITE_MAX_<i>NAME</i>].
|
| +** (The "_LIMIT_" in the name is changed to "_MAX_".))^
|
| +** ^Attempts to increase a limit above its hard upper bound are
|
| +** silently truncated to the hard upper bound.
|
| +**
|
| +** ^Regardless of whether or not the limit was changed, the
|
| +** [sqlite3_limit()] interface returns the prior value of the limit.
|
| +** ^Hence, to find the current value of a limit without changing it,
|
| +** simply invoke this interface with the third parameter set to -1.
|
| +**
|
| +** Run-time limits are intended for use in applications that manage
|
| ** both their own internal database and also databases that are controlled
|
| ** by untrusted external sources. An example application might be a
|
| ** web browser that has its own databases for storing history and
|
| @@ -2281,15 +2450,12 @@ typedef struct sqlite3_stmt sqlite3_stmt;
|
| ** [max_page_count] [PRAGMA].
|
| **
|
| ** New run-time limit categories may be added in future releases.
|
| -**
|
| -** Requirements:
|
| -** [H12762] [H12766] [H12769]
|
| */
|
| SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal);
|
|
|
| /*
|
| -** CAPI3REF: Run-Time Limit Categories {H12790} <H12760>
|
| -** KEYWORDS: {limit category} {limit categories}
|
| +** CAPI3REF: Run-Time Limit Categories
|
| +** KEYWORDS: {limit category} {*limit categories}
|
| **
|
| ** These constants define various performance limits
|
| ** that can be lowered at run-time using [sqlite3_limit()].
|
| @@ -2297,43 +2463,44 @@ SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal);
|
| ** Additional information is available at [limits | Limits in SQLite].
|
| **
|
| ** <dl>
|
| -** <dt>SQLITE_LIMIT_LENGTH</dt>
|
| -** <dd>The maximum size of any string or BLOB or table row.<dd>
|
| +** ^(<dt>SQLITE_LIMIT_LENGTH</dt>
|
| +** <dd>The maximum size of any string or BLOB or table row, in bytes.<dd>)^
|
| **
|
| -** <dt>SQLITE_LIMIT_SQL_LENGTH</dt>
|
| -** <dd>The maximum length of an SQL statement.</dd>
|
| +** ^(<dt>SQLITE_LIMIT_SQL_LENGTH</dt>
|
| +** <dd>The maximum length of an SQL statement, in bytes.</dd>)^
|
| **
|
| -** <dt>SQLITE_LIMIT_COLUMN</dt>
|
| +** ^(<dt>SQLITE_LIMIT_COLUMN</dt>
|
| ** <dd>The maximum number of columns in a table definition or in the
|
| ** result set of a [SELECT] or the maximum number of columns in an index
|
| -** or in an ORDER BY or GROUP BY clause.</dd>
|
| +** or in an ORDER BY or GROUP BY clause.</dd>)^
|
| **
|
| -** <dt>SQLITE_LIMIT_EXPR_DEPTH</dt>
|
| -** <dd>The maximum depth of the parse tree on any expression.</dd>
|
| +** ^(<dt>SQLITE_LIMIT_EXPR_DEPTH</dt>
|
| +** <dd>The maximum depth of the parse tree on any expression.</dd>)^
|
| **
|
| -** <dt>SQLITE_LIMIT_COMPOUND_SELECT</dt>
|
| -** <dd>The maximum number of terms in a compound SELECT statement.</dd>
|
| +** ^(<dt>SQLITE_LIMIT_COMPOUND_SELECT</dt>
|
| +** <dd>The maximum number of terms in a compound SELECT statement.</dd>)^
|
| **
|
| -** <dt>SQLITE_LIMIT_VDBE_OP</dt>
|
| +** ^(<dt>SQLITE_LIMIT_VDBE_OP</dt>
|
| ** <dd>The maximum number of instructions in a virtual machine program
|
| -** used to implement an SQL statement.</dd>
|
| +** used to implement an SQL statement. This limit is not currently
|
| +** enforced, though that might be added in some future release of
|
| +** SQLite.</dd>)^
|
| **
|
| -** <dt>SQLITE_LIMIT_FUNCTION_ARG</dt>
|
| -** <dd>The maximum number of arguments on a function.</dd>
|
| +** ^(<dt>SQLITE_LIMIT_FUNCTION_ARG</dt>
|
| +** <dd>The maximum number of arguments on a function.</dd>)^
|
| **
|
| -** <dt>SQLITE_LIMIT_ATTACHED</dt>
|
| -** <dd>The maximum number of [ATTACH | attached databases].</dd>
|
| +** ^(<dt>SQLITE_LIMIT_ATTACHED</dt>
|
| +** <dd>The maximum number of [ATTACH | attached databases].)^</dd>
|
| **
|
| -** <dt>SQLITE_LIMIT_LIKE_PATTERN_LENGTH</dt>
|
| +** ^(<dt>SQLITE_LIMIT_LIKE_PATTERN_LENGTH</dt>
|
| ** <dd>The maximum length of the pattern argument to the [LIKE] or
|
| -** [GLOB] operators.</dd>
|
| +** [GLOB] operators.</dd>)^
|
| **
|
| -** <dt>SQLITE_LIMIT_VARIABLE_NUMBER</dt>
|
| -** <dd>The maximum number of variables in an SQL statement that can
|
| -** be bound.</dd>
|
| +** ^(<dt>SQLITE_LIMIT_VARIABLE_NUMBER</dt>
|
| +** <dd>The maximum index number of any [parameter] in an SQL statement.)^
|
| **
|
| -** <dt>SQLITE_LIMIT_TRIGGER_DEPTH</dt>
|
| -** <dd>The maximum depth of recursion for triggers.</dd>
|
| +** ^(<dt>SQLITE_LIMIT_TRIGGER_DEPTH</dt>
|
| +** <dd>The maximum depth of recursion for triggers.</dd>)^
|
| ** </dl>
|
| */
|
| #define SQLITE_LIMIT_LENGTH 0
|
| @@ -2349,7 +2516,7 @@ SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal);
|
| #define SQLITE_LIMIT_TRIGGER_DEPTH 10
|
|
|
| /*
|
| -** CAPI3REF: Compiling An SQL Statement {H13010} <S10000>
|
| +** CAPI3REF: Compiling An SQL Statement
|
| ** KEYWORDS: {SQL statement compiler}
|
| **
|
| ** To execute an SQL query, it must first be compiled into a byte-code
|
| @@ -2364,9 +2531,9 @@ SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal);
|
| ** interfaces use UTF-8, and sqlite3_prepare16() and sqlite3_prepare16_v2()
|
| ** use UTF-16.
|
| **
|
| -** If the nByte argument is less than zero, then zSql is read up to the
|
| -** first zero terminator. If nByte is non-negative, then it is the maximum
|
| -** number of bytes read from zSql. When nByte is non-negative, the
|
| +** ^If the nByte argument is less than zero, then zSql is read up to the
|
| +** first zero terminator. ^If nByte is non-negative, then it is the maximum
|
| +** number of bytes read from zSql. ^When nByte is non-negative, the
|
| ** zSql string ends at either the first '\000' or '\u0000' character or
|
| ** the nByte-th byte, whichever comes first. If the caller knows
|
| ** that the supplied string is nul-terminated, then there is a small
|
| @@ -2374,54 +2541,59 @@ SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal);
|
| ** is equal to the number of bytes in the input string <i>including</i>
|
| ** the nul-terminator bytes.
|
| **
|
| -** If pzTail is not NULL then *pzTail is made to point to the first byte
|
| +** ^If pzTail is not NULL then *pzTail is made to point to the first byte
|
| ** past the end of the first SQL statement in zSql. These routines only
|
| ** compile the first statement in zSql, so *pzTail is left pointing to
|
| ** what remains uncompiled.
|
| **
|
| -** *ppStmt is left pointing to a compiled [prepared statement] that can be
|
| -** executed using [sqlite3_step()]. If there is an error, *ppStmt is set
|
| -** to NULL. If the input text contains no SQL (if the input is an empty
|
| +** ^*ppStmt is left pointing to a compiled [prepared statement] that can be
|
| +** executed using [sqlite3_step()]. ^If there is an error, *ppStmt is set
|
| +** to NULL. ^If the input text contains no SQL (if the input is an empty
|
| ** string or a comment) then *ppStmt is set to NULL.
|
| ** The calling procedure is responsible for deleting the compiled
|
| ** SQL statement using [sqlite3_finalize()] after it has finished with it.
|
| ** ppStmt may not be NULL.
|
| **
|
| -** On success, [SQLITE_OK] is returned, otherwise an [error code] is returned.
|
| +** ^On success, the sqlite3_prepare() family of routines return [SQLITE_OK];
|
| +** otherwise an [error code] is returned.
|
| **
|
| ** The sqlite3_prepare_v2() and sqlite3_prepare16_v2() interfaces are
|
| ** recommended for all new programs. The two older interfaces are retained
|
| ** for backwards compatibility, but their use is discouraged.
|
| -** In the "v2" interfaces, the prepared statement
|
| +** ^In the "v2" interfaces, the prepared statement
|
| ** that is returned (the [sqlite3_stmt] object) contains a copy of the
|
| ** original SQL text. This causes the [sqlite3_step()] interface to
|
| -** behave a differently in two ways:
|
| +** behave differently in three ways:
|
| **
|
| ** <ol>
|
| ** <li>
|
| -** If the database schema changes, instead of returning [SQLITE_SCHEMA] as it
|
| +** ^If the database schema changes, instead of returning [SQLITE_SCHEMA] as it
|
| ** always used to do, [sqlite3_step()] will automatically recompile the SQL
|
| -** statement and try to run it again. If the schema has changed in
|
| -** a way that makes the statement no longer valid, [sqlite3_step()] will still
|
| -** return [SQLITE_SCHEMA]. But unlike the legacy behavior, [SQLITE_SCHEMA] is
|
| -** now a fatal error. Calling [sqlite3_prepare_v2()] again will not make the
|
| -** error go away. Note: use [sqlite3_errmsg()] to find the text
|
| -** of the parsing error that results in an [SQLITE_SCHEMA] return.
|
| +** statement and try to run it again.
|
| ** </li>
|
| **
|
| ** <li>
|
| -** When an error occurs, [sqlite3_step()] will return one of the detailed
|
| -** [error codes] or [extended error codes]. The legacy behavior was that
|
| +** ^When an error occurs, [sqlite3_step()] will return one of the detailed
|
| +** [error codes] or [extended error codes]. ^The legacy behavior was that
|
| ** [sqlite3_step()] would only return a generic [SQLITE_ERROR] result code
|
| -** and you would have to make a second call to [sqlite3_reset()] in order
|
| -** to find the underlying cause of the problem. With the "v2" prepare
|
| +** and the application would have to make a second call to [sqlite3_reset()]
|
| +** in order to find the underlying cause of the problem. With the "v2" prepare
|
| ** interfaces, the underlying reason for the error is returned immediately.
|
| ** </li>
|
| -** </ol>
|
| -**
|
| -** Requirements:
|
| -** [H13011] [H13012] [H13013] [H13014] [H13015] [H13016] [H13019] [H13021]
|
| **
|
| +** <li>
|
| +** ^If the specific value bound to [parameter | host parameter] in the
|
| +** WHERE clause might influence the choice of query plan for a statement,
|
| +** then the statement will be automatically recompiled, as if there had been
|
| +** a schema change, on the first [sqlite3_step()] call following any change
|
| +** to the [sqlite3_bind_text | bindings] of that [parameter].
|
| +** ^The specific value of WHERE-clause [parameter] might influence the
|
| +** choice of query plan if the parameter is the left-hand side of a [LIKE]
|
| +** or [GLOB] operator or if the parameter is compared to an indexed column
|
| +** and the [SQLITE_ENABLE_STAT2] compile-time option is enabled.
|
| +** the
|
| +** </li>
|
| +** </ol>
|
| */
|
| SQLITE_API int sqlite3_prepare(
|
| sqlite3 *db, /* Database handle */
|
| @@ -2453,24 +2625,21 @@ SQLITE_API int sqlite3_prepare16_v2(
|
| );
|
|
|
| /*
|
| -** CAPI3REF: Retrieving Statement SQL {H13100} <H13000>
|
| +** CAPI3REF: Retrieving Statement SQL
|
| **
|
| -** This interface can be used to retrieve a saved copy of the original
|
| +** ^This interface can be used to retrieve a saved copy of the original
|
| ** SQL text used to create a [prepared statement] if that statement was
|
| ** compiled using either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()].
|
| -**
|
| -** Requirements:
|
| -** [H13101] [H13102] [H13103]
|
| */
|
| SQLITE_API const char *sqlite3_sql(sqlite3_stmt *pStmt);
|
|
|
| /*
|
| -** CAPI3REF: Dynamically Typed Value Object {H15000} <S20200>
|
| +** CAPI3REF: Dynamically Typed Value Object
|
| ** KEYWORDS: {protected sqlite3_value} {unprotected sqlite3_value}
|
| **
|
| ** SQLite uses the sqlite3_value object to represent all values
|
| ** that can be stored in a database table. SQLite uses dynamic typing
|
| -** for the values it stores. Values stored in sqlite3_value objects
|
| +** for the values it stores. ^Values stored in sqlite3_value objects
|
| ** can be integers, floating point values, strings, BLOBs, or NULL.
|
| **
|
| ** An sqlite3_value object may be either "protected" or "unprotected".
|
| @@ -2489,12 +2658,12 @@ SQLITE_API const char *sqlite3_sql(sqlite3_stmt *pStmt);
|
| ** then there is no distinction between protected and unprotected
|
| ** sqlite3_value objects and they can be used interchangeably. However,
|
| ** for maximum code portability it is recommended that applications
|
| -** still make the distinction between between protected and unprotected
|
| +** still make the distinction between protected and unprotected
|
| ** sqlite3_value objects even when not strictly required.
|
| **
|
| -** The sqlite3_value objects that are passed as parameters into the
|
| +** ^The sqlite3_value objects that are passed as parameters into the
|
| ** implementation of [application-defined SQL functions] are protected.
|
| -** The sqlite3_value object returned by
|
| +** ^The sqlite3_value object returned by
|
| ** [sqlite3_column_value()] is unprotected.
|
| ** Unprotected sqlite3_value objects may only be used with
|
| ** [sqlite3_result_value()] and [sqlite3_bind_value()].
|
| @@ -2504,10 +2673,10 @@ SQLITE_API const char *sqlite3_sql(sqlite3_stmt *pStmt);
|
| typedef struct Mem sqlite3_value;
|
|
|
| /*
|
| -** CAPI3REF: SQL Function Context Object {H16001} <S20200>
|
| +** CAPI3REF: SQL Function Context Object
|
| **
|
| ** The context in which an SQL function executes is stored in an
|
| -** sqlite3_context object. A pointer to an sqlite3_context object
|
| +** sqlite3_context object. ^A pointer to an sqlite3_context object
|
| ** is always first parameter to [application-defined SQL functions].
|
| ** The application-defined SQL function implementation will pass this
|
| ** pointer through into calls to [sqlite3_result_int | sqlite3_result()],
|
| @@ -2518,11 +2687,11 @@ typedef struct Mem sqlite3_value;
|
| typedef struct sqlite3_context sqlite3_context;
|
|
|
| /*
|
| -** CAPI3REF: Binding Values To Prepared Statements {H13500} <S70300>
|
| +** CAPI3REF: Binding Values To Prepared Statements
|
| ** KEYWORDS: {host parameter} {host parameters} {host parameter name}
|
| ** KEYWORDS: {SQL parameter} {SQL parameters} {parameter binding}
|
| **
|
| -** In the SQL strings input to [sqlite3_prepare_v2()] and its variants,
|
| +** ^(In the SQL statement text input to [sqlite3_prepare_v2()] and its variants,
|
| ** literals may be replaced by a [parameter] that matches one of following
|
| ** templates:
|
| **
|
| @@ -2535,72 +2704,66 @@ typedef struct sqlite3_context sqlite3_context;
|
| ** </ul>
|
| **
|
| ** In the templates above, NNN represents an integer literal,
|
| -** and VVV represents an alphanumeric identifer. The values of these
|
| +** and VVV represents an alphanumeric identifier.)^ ^The values of these
|
| ** parameters (also called "host parameter names" or "SQL parameters")
|
| ** can be set using the sqlite3_bind_*() routines defined here.
|
| **
|
| -** The first argument to the sqlite3_bind_*() routines is always
|
| +** ^The first argument to the sqlite3_bind_*() routines is always
|
| ** a pointer to the [sqlite3_stmt] object returned from
|
| ** [sqlite3_prepare_v2()] or its variants.
|
| **
|
| -** The second argument is the index of the SQL parameter to be set.
|
| -** The leftmost SQL parameter has an index of 1. When the same named
|
| +** ^The second argument is the index of the SQL parameter to be set.
|
| +** ^The leftmost SQL parameter has an index of 1. ^When the same named
|
| ** SQL parameter is used more than once, second and subsequent
|
| ** occurrences have the same index as the first occurrence.
|
| -** The index for named parameters can be looked up using the
|
| -** [sqlite3_bind_parameter_index()] API if desired. The index
|
| +** ^The index for named parameters can be looked up using the
|
| +** [sqlite3_bind_parameter_index()] API if desired. ^The index
|
| ** for "?NNN" parameters is the value of NNN.
|
| -** The NNN value must be between 1 and the [sqlite3_limit()]
|
| +** ^The NNN value must be between 1 and the [sqlite3_limit()]
|
| ** parameter [SQLITE_LIMIT_VARIABLE_NUMBER] (default value: 999).
|
| **
|
| -** The third argument is the value to bind to the parameter.
|
| +** ^The third argument is the value to bind to the parameter.
|
| **
|
| -** In those routines that have a fourth argument, its value is the
|
| +** ^(In those routines that have a fourth argument, its value is the
|
| ** number of bytes in the parameter. To be clear: the value is the
|
| -** number of <u>bytes</u> in the value, not the number of characters.
|
| -** If the fourth parameter is negative, the length of the string is
|
| +** number of <u>bytes</u> in the value, not the number of characters.)^
|
| +** ^If the fourth parameter is negative, the length of the string is
|
| ** the number of bytes up to the first zero terminator.
|
| **
|
| -** The fifth argument to sqlite3_bind_blob(), sqlite3_bind_text(), and
|
| +** ^The fifth argument to sqlite3_bind_blob(), sqlite3_bind_text(), and
|
| ** sqlite3_bind_text16() is a destructor used to dispose of the BLOB or
|
| -** string after SQLite has finished with it. If the fifth argument is
|
| +** string after SQLite has finished with it. ^If the fifth argument is
|
| ** the special value [SQLITE_STATIC], then SQLite assumes that the
|
| ** information is in static, unmanaged space and does not need to be freed.
|
| -** If the fifth argument has the value [SQLITE_TRANSIENT], then
|
| +** ^If the fifth argument has the value [SQLITE_TRANSIENT], then
|
| ** SQLite makes its own private copy of the data immediately, before
|
| ** the sqlite3_bind_*() routine returns.
|
| **
|
| -** The sqlite3_bind_zeroblob() routine binds a BLOB of length N that
|
| -** is filled with zeroes. A zeroblob uses a fixed amount of memory
|
| +** ^The sqlite3_bind_zeroblob() routine binds a BLOB of length N that
|
| +** is filled with zeroes. ^A zeroblob uses a fixed amount of memory
|
| ** (just an integer to hold its size) while it is being processed.
|
| ** Zeroblobs are intended to serve as placeholders for BLOBs whose
|
| ** content is later written using
|
| ** [sqlite3_blob_open | incremental BLOB I/O] routines.
|
| -** A negative value for the zeroblob results in a zero-length BLOB.
|
| -**
|
| -** The sqlite3_bind_*() routines must be called after
|
| -** [sqlite3_prepare_v2()] (and its variants) or [sqlite3_reset()] and
|
| -** before [sqlite3_step()].
|
| -** Bindings are not cleared by the [sqlite3_reset()] routine.
|
| -** Unbound parameters are interpreted as NULL.
|
| -**
|
| -** These routines return [SQLITE_OK] on success or an error code if
|
| -** anything goes wrong. [SQLITE_RANGE] is returned if the parameter
|
| -** index is out of range. [SQLITE_NOMEM] is returned if malloc() fails.
|
| -** [SQLITE_MISUSE] might be returned if these routines are called on a
|
| -** virtual machine that is the wrong state or which has already been finalized.
|
| -** Detection of misuse is unreliable. Applications should not depend
|
| -** on SQLITE_MISUSE returns. SQLITE_MISUSE is intended to indicate a
|
| -** a logic error in the application. Future versions of SQLite might
|
| -** panic rather than return SQLITE_MISUSE.
|
| +** ^A negative value for the zeroblob results in a zero-length BLOB.
|
| **
|
| -** See also: [sqlite3_bind_parameter_count()],
|
| -** [sqlite3_bind_parameter_name()], and [sqlite3_bind_parameter_index()].
|
| +** ^If any of the sqlite3_bind_*() routines are called with a NULL pointer
|
| +** for the [prepared statement] or with a prepared statement for which
|
| +** [sqlite3_step()] has been called more recently than [sqlite3_reset()],
|
| +** then the call will return [SQLITE_MISUSE]. If any sqlite3_bind_()
|
| +** routine is passed a [prepared statement] that has been finalized, the
|
| +** result is undefined and probably harmful.
|
| +**
|
| +** ^Bindings are not cleared by the [sqlite3_reset()] routine.
|
| +** ^Unbound parameters are interpreted as NULL.
|
| **
|
| -** Requirements:
|
| -** [H13506] [H13509] [H13512] [H13515] [H13518] [H13521] [H13524] [H13527]
|
| -** [H13530] [H13533] [H13536] [H13539] [H13542] [H13545] [H13548] [H13551]
|
| +** ^The sqlite3_bind_* routines return [SQLITE_OK] on success or an
|
| +** [error code] if anything goes wrong.
|
| +** ^[SQLITE_RANGE] is returned if the parameter
|
| +** index is out of range. ^[SQLITE_NOMEM] is returned if malloc() fails.
|
| **
|
| +** See also: [sqlite3_bind_parameter_count()],
|
| +** [sqlite3_bind_parameter_name()], and [sqlite3_bind_parameter_index()].
|
| */
|
| SQLITE_API int sqlite3_bind_blob(sqlite3_stmt*, int, const void*, int n, void(*)(void*));
|
| SQLITE_API int sqlite3_bind_double(sqlite3_stmt*, int, double);
|
| @@ -2613,45 +2776,42 @@ SQLITE_API int sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*);
|
| SQLITE_API int sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n);
|
|
|
| /*
|
| -** CAPI3REF: Number Of SQL Parameters {H13600} <S70300>
|
| +** CAPI3REF: Number Of SQL Parameters
|
| **
|
| -** This routine can be used to find the number of [SQL parameters]
|
| +** ^This routine can be used to find the number of [SQL parameters]
|
| ** in a [prepared statement]. SQL parameters are tokens of the
|
| ** form "?", "?NNN", ":AAA", "$AAA", or "@AAA" that serve as
|
| ** placeholders for values that are [sqlite3_bind_blob | bound]
|
| ** to the parameters at a later time.
|
| **
|
| -** This routine actually returns the index of the largest (rightmost)
|
| +** ^(This routine actually returns the index of the largest (rightmost)
|
| ** parameter. For all forms except ?NNN, this will correspond to the
|
| -** number of unique parameters. If parameters of the ?NNN are used,
|
| -** there may be gaps in the list.
|
| +** number of unique parameters. If parameters of the ?NNN form are used,
|
| +** there may be gaps in the list.)^
|
| **
|
| ** See also: [sqlite3_bind_blob|sqlite3_bind()],
|
| ** [sqlite3_bind_parameter_name()], and
|
| ** [sqlite3_bind_parameter_index()].
|
| -**
|
| -** Requirements:
|
| -** [H13601]
|
| */
|
| SQLITE_API int sqlite3_bind_parameter_count(sqlite3_stmt*);
|
|
|
| /*
|
| -** CAPI3REF: Name Of A Host Parameter {H13620} <S70300>
|
| +** CAPI3REF: Name Of A Host Parameter
|
| **
|
| -** This routine returns a pointer to the name of the n-th
|
| -** [SQL parameter] in a [prepared statement].
|
| -** SQL parameters of the form "?NNN" or ":AAA" or "@AAA" or "$AAA"
|
| +** ^The sqlite3_bind_parameter_name(P,N) interface returns
|
| +** the name of the N-th [SQL parameter] in the [prepared statement] P.
|
| +** ^(SQL parameters of the form "?NNN" or ":AAA" or "@AAA" or "$AAA"
|
| ** have a name which is the string "?NNN" or ":AAA" or "@AAA" or "$AAA"
|
| ** respectively.
|
| ** In other words, the initial ":" or "$" or "@" or "?"
|
| -** is included as part of the name.
|
| -** Parameters of the form "?" without a following integer have no name
|
| -** and are also referred to as "anonymous parameters".
|
| +** is included as part of the name.)^
|
| +** ^Parameters of the form "?" without a following integer have no name
|
| +** and are referred to as "nameless" or "anonymous parameters".
|
| **
|
| -** The first host parameter has an index of 1, not 0.
|
| +** ^The first host parameter has an index of 1, not 0.
|
| **
|
| -** If the value n is out of range or if the n-th parameter is
|
| -** nameless, then NULL is returned. The returned string is
|
| +** ^If the value N is out of range or if the N-th parameter is
|
| +** nameless, then NULL is returned. ^The returned string is
|
| ** always in UTF-8 encoding even if the named parameter was
|
| ** originally specified as UTF-16 in [sqlite3_prepare16()] or
|
| ** [sqlite3_prepare16_v2()].
|
| @@ -2659,125 +2819,110 @@ SQLITE_API int sqlite3_bind_parameter_count(sqlite3_stmt*);
|
| ** See also: [sqlite3_bind_blob|sqlite3_bind()],
|
| ** [sqlite3_bind_parameter_count()], and
|
| ** [sqlite3_bind_parameter_index()].
|
| -**
|
| -** Requirements:
|
| -** [H13621]
|
| */
|
| SQLITE_API const char *sqlite3_bind_parameter_name(sqlite3_stmt*, int);
|
|
|
| /*
|
| -** CAPI3REF: Index Of A Parameter With A Given Name {H13640} <S70300>
|
| +** CAPI3REF: Index Of A Parameter With A Given Name
|
| **
|
| -** Return the index of an SQL parameter given its name. The
|
| +** ^Return the index of an SQL parameter given its name. ^The
|
| ** index value returned is suitable for use as the second
|
| -** parameter to [sqlite3_bind_blob|sqlite3_bind()]. A zero
|
| -** is returned if no matching parameter is found. The parameter
|
| +** parameter to [sqlite3_bind_blob|sqlite3_bind()]. ^A zero
|
| +** is returned if no matching parameter is found. ^The parameter
|
| ** name must be given in UTF-8 even if the original statement
|
| ** was prepared from UTF-16 text using [sqlite3_prepare16_v2()].
|
| **
|
| ** See also: [sqlite3_bind_blob|sqlite3_bind()],
|
| ** [sqlite3_bind_parameter_count()], and
|
| ** [sqlite3_bind_parameter_index()].
|
| -**
|
| -** Requirements:
|
| -** [H13641]
|
| */
|
| SQLITE_API int sqlite3_bind_parameter_index(sqlite3_stmt*, const char *zName);
|
|
|
| /*
|
| -** CAPI3REF: Reset All Bindings On A Prepared Statement {H13660} <S70300>
|
| +** CAPI3REF: Reset All Bindings On A Prepared Statement
|
| **
|
| -** Contrary to the intuition of many, [sqlite3_reset()] does not reset
|
| +** ^Contrary to the intuition of many, [sqlite3_reset()] does not reset
|
| ** the [sqlite3_bind_blob | bindings] on a [prepared statement].
|
| -** Use this routine to reset all host parameters to NULL.
|
| -**
|
| -** Requirements:
|
| -** [H13661]
|
| +** ^Use this routine to reset all host parameters to NULL.
|
| */
|
| SQLITE_API int sqlite3_clear_bindings(sqlite3_stmt*);
|
|
|
| /*
|
| -** CAPI3REF: Number Of Columns In A Result Set {H13710} <S10700>
|
| +** CAPI3REF: Number Of Columns In A Result Set
|
| **
|
| -** Return the number of columns in the result set returned by the
|
| -** [prepared statement]. This routine returns 0 if pStmt is an SQL
|
| +** ^Return the number of columns in the result set returned by the
|
| +** [prepared statement]. ^This routine returns 0 if pStmt is an SQL
|
| ** statement that does not return data (for example an [UPDATE]).
|
| **
|
| -** Requirements:
|
| -** [H13711]
|
| +** See also: [sqlite3_data_count()]
|
| */
|
| SQLITE_API int sqlite3_column_count(sqlite3_stmt *pStmt);
|
|
|
| /*
|
| -** CAPI3REF: Column Names In A Result Set {H13720} <S10700>
|
| +** CAPI3REF: Column Names In A Result Set
|
| **
|
| -** These routines return the name assigned to a particular column
|
| -** in the result set of a [SELECT] statement. The sqlite3_column_name()
|
| +** ^These routines return the name assigned to a particular column
|
| +** in the result set of a [SELECT] statement. ^The sqlite3_column_name()
|
| ** interface returns a pointer to a zero-terminated UTF-8 string
|
| ** and sqlite3_column_name16() returns a pointer to a zero-terminated
|
| -** UTF-16 string. The first parameter is the [prepared statement]
|
| -** that implements the [SELECT] statement. The second parameter is the
|
| -** column number. The leftmost column is number 0.
|
| +** UTF-16 string. ^The first parameter is the [prepared statement]
|
| +** that implements the [SELECT] statement. ^The second parameter is the
|
| +** column number. ^The leftmost column is number 0.
|
| **
|
| -** The returned string pointer is valid until either the [prepared statement]
|
| +** ^The returned string pointer is valid until either the [prepared statement]
|
| ** is destroyed by [sqlite3_finalize()] or until the next call to
|
| ** sqlite3_column_name() or sqlite3_column_name16() on the same column.
|
| **
|
| -** If sqlite3_malloc() fails during the processing of either routine
|
| +** ^If sqlite3_malloc() fails during the processing of either routine
|
| ** (for example during a conversion from UTF-8 to UTF-16) then a
|
| ** NULL pointer is returned.
|
| **
|
| -** The name of a result column is the value of the "AS" clause for
|
| +** ^The name of a result column is the value of the "AS" clause for
|
| ** that column, if there is an AS clause. If there is no AS clause
|
| ** then the name of the column is unspecified and may change from
|
| ** one release of SQLite to the next.
|
| -**
|
| -** Requirements:
|
| -** [H13721] [H13723] [H13724] [H13725] [H13726] [H13727]
|
| */
|
| SQLITE_API const char *sqlite3_column_name(sqlite3_stmt*, int N);
|
| SQLITE_API const void *sqlite3_column_name16(sqlite3_stmt*, int N);
|
|
|
| /*
|
| -** CAPI3REF: Source Of Data In A Query Result {H13740} <S10700>
|
| +** CAPI3REF: Source Of Data In A Query Result
|
| **
|
| -** These routines provide a means to determine what column of what
|
| -** table in which database a result of a [SELECT] statement comes from.
|
| -** The name of the database or table or column can be returned as
|
| -** either a UTF-8 or UTF-16 string. The _database_ routines return
|
| +** ^These routines provide a means to determine the database, table, and
|
| +** table column that is the origin of a particular result column in
|
| +** [SELECT] statement.
|
| +** ^The name of the database or table or column can be returned as
|
| +** either a UTF-8 or UTF-16 string. ^The _database_ routines return
|
| ** the database name, the _table_ routines return the table name, and
|
| ** the origin_ routines return the column name.
|
| -** The returned string is valid until the [prepared statement] is destroyed
|
| +** ^The returned string is valid until the [prepared statement] is destroyed
|
| ** using [sqlite3_finalize()] or until the same information is requested
|
| ** again in a different encoding.
|
| **
|
| -** The names returned are the original un-aliased names of the
|
| +** ^The names returned are the original un-aliased names of the
|
| ** database, table, and column.
|
| **
|
| -** The first argument to the following calls is a [prepared statement].
|
| -** These functions return information about the Nth column returned by
|
| +** ^The first argument to these interfaces is a [prepared statement].
|
| +** ^These functions return information about the Nth result column returned by
|
| ** the statement, where N is the second function argument.
|
| +** ^The left-most column is column 0 for these routines.
|
| **
|
| -** If the Nth column returned by the statement is an expression or
|
| +** ^If the Nth column returned by the statement is an expression or
|
| ** subquery and is not a column value, then all of these functions return
|
| -** NULL. These routine might also return NULL if a memory allocation error
|
| -** occurs. Otherwise, they return the name of the attached database, table
|
| -** and column that query result column was extracted from.
|
| +** NULL. ^These routine might also return NULL if a memory allocation error
|
| +** occurs. ^Otherwise, they return the name of the attached database, table,
|
| +** or column that query result column was extracted from.
|
| **
|
| -** As with all other SQLite APIs, those postfixed with "16" return
|
| -** UTF-16 encoded strings, the other functions return UTF-8. {END}
|
| +** ^As with all other SQLite APIs, those whose names end with "16" return
|
| +** UTF-16 encoded strings and the other functions return UTF-8.
|
| **
|
| -** These APIs are only available if the library was compiled with the
|
| -** [SQLITE_ENABLE_COLUMN_METADATA] C-preprocessor symbol defined.
|
| +** ^These APIs are only available if the library was compiled with the
|
| +** [SQLITE_ENABLE_COLUMN_METADATA] C-preprocessor symbol.
|
| **
|
| -** {A13751}
|
| ** If two or more threads call one or more of these routines against the same
|
| ** prepared statement and column at the same time then the results are
|
| ** undefined.
|
| **
|
| -** Requirements:
|
| -** [H13741] [H13742] [H13743] [H13744] [H13745] [H13746] [H13748]
|
| -**
|
| ** If two or more threads call one or more
|
| ** [sqlite3_column_database_name | column metadata interfaces]
|
| ** for the same [prepared statement] and result column
|
| @@ -2791,17 +2936,17 @@ SQLITE_API const char *sqlite3_column_origin_name(sqlite3_stmt*,int);
|
| SQLITE_API const void *sqlite3_column_origin_name16(sqlite3_stmt*,int);
|
|
|
| /*
|
| -** CAPI3REF: Declared Datatype Of A Query Result {H13760} <S10700>
|
| +** CAPI3REF: Declared Datatype Of A Query Result
|
| **
|
| -** The first parameter is a [prepared statement].
|
| +** ^(The first parameter is a [prepared statement].
|
| ** If this statement is a [SELECT] statement and the Nth column of the
|
| ** returned result set of that [SELECT] is a table column (not an
|
| ** expression or subquery) then the declared type of the table
|
| -** column is returned. If the Nth column of the result set is an
|
| +** column is returned.)^ ^If the Nth column of the result set is an
|
| ** expression or subquery, then a NULL pointer is returned.
|
| -** The returned string is always UTF-8 encoded. {END}
|
| +** ^The returned string is always UTF-8 encoded.
|
| **
|
| -** For example, given the database schema:
|
| +** ^(For example, given the database schema:
|
| **
|
| ** CREATE TABLE t1(c1 VARIANT);
|
| **
|
| @@ -2810,23 +2955,20 @@ SQLITE_API const void *sqlite3_column_origin_name16(sqlite3_stmt*,int);
|
| ** SELECT c1 + 1, c1 FROM t1;
|
| **
|
| ** this routine would return the string "VARIANT" for the second result
|
| -** column (i==1), and a NULL pointer for the first result column (i==0).
|
| +** column (i==1), and a NULL pointer for the first result column (i==0).)^
|
| **
|
| -** SQLite uses dynamic run-time typing. So just because a column
|
| +** ^SQLite uses dynamic run-time typing. ^So just because a column
|
| ** is declared to contain a particular type does not mean that the
|
| ** data stored in that column is of the declared type. SQLite is
|
| -** strongly typed, but the typing is dynamic not static. Type
|
| +** strongly typed, but the typing is dynamic not static. ^Type
|
| ** is associated with individual values, not with the containers
|
| ** used to hold those values.
|
| -**
|
| -** Requirements:
|
| -** [H13761] [H13762] [H13763]
|
| */
|
| SQLITE_API const char *sqlite3_column_decltype(sqlite3_stmt*,int);
|
| SQLITE_API const void *sqlite3_column_decltype16(sqlite3_stmt*,int);
|
|
|
| /*
|
| -** CAPI3REF: Evaluate An SQL Statement {H13200} <S10000>
|
| +** CAPI3REF: Evaluate An SQL Statement
|
| **
|
| ** After a [prepared statement] has been prepared using either
|
| ** [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] or one of the legacy
|
| @@ -2840,35 +2982,35 @@ SQLITE_API const void *sqlite3_column_decltype16(sqlite3_stmt*,int);
|
| ** new "v2" interface is recommended for new applications but the legacy
|
| ** interface will continue to be supported.
|
| **
|
| -** In the legacy interface, the return value will be either [SQLITE_BUSY],
|
| +** ^In the legacy interface, the return value will be either [SQLITE_BUSY],
|
| ** [SQLITE_DONE], [SQLITE_ROW], [SQLITE_ERROR], or [SQLITE_MISUSE].
|
| -** With the "v2" interface, any of the other [result codes] or
|
| +** ^With the "v2" interface, any of the other [result codes] or
|
| ** [extended result codes] might be returned as well.
|
| **
|
| -** [SQLITE_BUSY] means that the database engine was unable to acquire the
|
| -** database locks it needs to do its job. If the statement is a [COMMIT]
|
| +** ^[SQLITE_BUSY] means that the database engine was unable to acquire the
|
| +** database locks it needs to do its job. ^If the statement is a [COMMIT]
|
| ** or occurs outside of an explicit transaction, then you can retry the
|
| ** statement. If the statement is not a [COMMIT] and occurs within a
|
| ** explicit transaction then you should rollback the transaction before
|
| ** continuing.
|
| **
|
| -** [SQLITE_DONE] means that the statement has finished executing
|
| +** ^[SQLITE_DONE] means that the statement has finished executing
|
| ** successfully. sqlite3_step() should not be called again on this virtual
|
| ** machine without first calling [sqlite3_reset()] to reset the virtual
|
| ** machine back to its initial state.
|
| **
|
| -** If the SQL statement being executed returns any data, then [SQLITE_ROW]
|
| +** ^If the SQL statement being executed returns any data, then [SQLITE_ROW]
|
| ** is returned each time a new row of data is ready for processing by the
|
| ** caller. The values may be accessed using the [column access functions].
|
| ** sqlite3_step() is called again to retrieve the next row of data.
|
| **
|
| -** [SQLITE_ERROR] means that a run-time error (such as a constraint
|
| +** ^[SQLITE_ERROR] means that a run-time error (such as a constraint
|
| ** violation) has occurred. sqlite3_step() should not be called again on
|
| ** the VM. More information may be found by calling [sqlite3_errmsg()].
|
| -** With the legacy interface, a more specific error code (for example,
|
| +** ^With the legacy interface, a more specific error code (for example,
|
| ** [SQLITE_INTERRUPT], [SQLITE_SCHEMA], [SQLITE_CORRUPT], and so forth)
|
| ** can be obtained by calling [sqlite3_reset()] on the
|
| -** [prepared statement]. In the "v2" interface,
|
| +** [prepared statement]. ^In the "v2" interface,
|
| ** the more specific error code is returned directly by sqlite3_step().
|
| **
|
| ** [SQLITE_MISUSE] means that the this routine was called inappropriately.
|
| @@ -2878,6 +3020,14 @@ SQLITE_API const void *sqlite3_column_decltype16(sqlite3_stmt*,int);
|
| ** be the case that the same database connection is being used by two or
|
| ** more threads at the same moment in time.
|
| **
|
| +** For all versions of SQLite up to and including 3.6.23.1, it was required
|
| +** after sqlite3_step() returned anything other than [SQLITE_ROW] that
|
| +** [sqlite3_reset()] be called before any subsequent invocation of
|
| +** sqlite3_step(). Failure to invoke [sqlite3_reset()] in this way would
|
| +** result in an [SQLITE_MISUSE] return from sqlite3_step(). But after
|
| +** version 3.6.23.1, sqlite3_step() began calling [sqlite3_reset()]
|
| +** automatically in this circumstance rather than returning [SQLITE_MISUSE].
|
| +**
|
| ** <b>Goofy Interface Alert:</b> In the legacy interface, the sqlite3_step()
|
| ** API always returns a generic error code, [SQLITE_ERROR], following any
|
| ** error other than [SQLITE_BUSY] and [SQLITE_MISUSE]. You must call
|
| @@ -2889,27 +3039,28 @@ SQLITE_API const void *sqlite3_column_decltype16(sqlite3_stmt*,int);
|
| ** of the legacy [sqlite3_prepare()] and [sqlite3_prepare16()] interfaces,
|
| ** then the more specific [error codes] are returned directly
|
| ** by sqlite3_step(). The use of the "v2" interface is recommended.
|
| -**
|
| -** Requirements:
|
| -** [H13202] [H15304] [H15306] [H15308] [H15310]
|
| */
|
| SQLITE_API int sqlite3_step(sqlite3_stmt*);
|
|
|
| /*
|
| -** CAPI3REF: Number of columns in a result set {H13770} <S10700>
|
| +** CAPI3REF: Number of columns in a result set
|
| **
|
| -** Returns the number of values in the current row of the result set.
|
| +** ^The sqlite3_data_count(P) interface returns the number of columns in the
|
| +** current row of the result set of [prepared statement] P.
|
| +** ^If prepared statement P does not have results ready to return
|
| +** (via calls to the [sqlite3_column_int | sqlite3_column_*()] of
|
| +** interfaces) then sqlite3_data_count(P) returns 0.
|
| +** ^The sqlite3_data_count(P) routine also returns 0 if P is a NULL pointer.
|
| **
|
| -** Requirements:
|
| -** [H13771] [H13772]
|
| +** See also: [sqlite3_column_count()]
|
| */
|
| SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt);
|
|
|
| /*
|
| -** CAPI3REF: Fundamental Datatypes {H10265} <S10110><S10120>
|
| +** CAPI3REF: Fundamental Datatypes
|
| ** KEYWORDS: SQLITE_TEXT
|
| **
|
| -** {H10266} Every value in SQLite has one of five fundamental datatypes:
|
| +** ^(Every value in SQLite has one of five fundamental datatypes:
|
| **
|
| ** <ul>
|
| ** <li> 64-bit signed integer
|
| @@ -2917,7 +3068,7 @@ SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt);
|
| ** <li> string
|
| ** <li> BLOB
|
| ** <li> NULL
|
| -** </ul> {END}
|
| +** </ul>)^
|
| **
|
| ** These constants are codes for each of those types.
|
| **
|
| @@ -2938,17 +3089,19 @@ SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt);
|
| #define SQLITE3_TEXT 3
|
|
|
| /*
|
| -** CAPI3REF: Result Values From A Query {H13800} <S10700>
|
| +** CAPI3REF: Result Values From A Query
|
| ** KEYWORDS: {column access functions}
|
| **
|
| -** These routines form the "result set query" interface.
|
| +** These routines form the "result set" interface.
|
| **
|
| -** These routines return information about a single column of the current
|
| -** result row of a query. In every case the first argument is a pointer
|
| +** ^These routines return information about a single column of the current
|
| +** result row of a query. ^In every case the first argument is a pointer
|
| ** to the [prepared statement] that is being evaluated (the [sqlite3_stmt*]
|
| ** that was returned from [sqlite3_prepare_v2()] or one of its variants)
|
| ** and the second argument is the index of the column for which information
|
| -** should be returned. The leftmost column of the result set has the index 0.
|
| +** should be returned. ^The leftmost column of the result set has the index 0.
|
| +** ^The number of columns in the result can be determined using
|
| +** [sqlite3_column_count()].
|
| **
|
| ** If the SQL statement does not currently point to a valid row, or if the
|
| ** column index is out of range, the result is undefined.
|
| @@ -2962,9 +3115,9 @@ SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt);
|
| ** are called from a different thread while any of these routines
|
| ** are pending, then the results are undefined.
|
| **
|
| -** The sqlite3_column_type() routine returns the
|
| +** ^The sqlite3_column_type() routine returns the
|
| ** [SQLITE_INTEGER | datatype code] for the initial data type
|
| -** of the result column. The returned value is one of [SQLITE_INTEGER],
|
| +** of the result column. ^The returned value is one of [SQLITE_INTEGER],
|
| ** [SQLITE_FLOAT], [SQLITE_TEXT], [SQLITE_BLOB], or [SQLITE_NULL]. The value
|
| ** returned by sqlite3_column_type() is only meaningful if no type
|
| ** conversions have occurred as described below. After a type conversion,
|
| @@ -2972,27 +3125,35 @@ SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt);
|
| ** versions of SQLite may change the behavior of sqlite3_column_type()
|
| ** following a type conversion.
|
| **
|
| -** If the result is a BLOB or UTF-8 string then the sqlite3_column_bytes()
|
| +** ^If the result is a BLOB or UTF-8 string then the sqlite3_column_bytes()
|
| ** routine returns the number of bytes in that BLOB or string.
|
| -** If the result is a UTF-16 string, then sqlite3_column_bytes() converts
|
| +** ^If the result is a UTF-16 string, then sqlite3_column_bytes() converts
|
| ** the string to UTF-8 and then returns the number of bytes.
|
| -** If the result is a numeric value then sqlite3_column_bytes() uses
|
| +** ^If the result is a numeric value then sqlite3_column_bytes() uses
|
| ** [sqlite3_snprintf()] to convert that value to a UTF-8 string and returns
|
| ** the number of bytes in that string.
|
| -** The value returned does not include the zero terminator at the end
|
| -** of the string. For clarity: the value returned is the number of
|
| -** bytes in the string, not the number of characters.
|
| +** ^If the result is NULL, then sqlite3_column_bytes() returns zero.
|
| +**
|
| +** ^If the result is a BLOB or UTF-16 string then the sqlite3_column_bytes16()
|
| +** routine returns the number of bytes in that BLOB or string.
|
| +** ^If the result is a UTF-8 string, then sqlite3_column_bytes16() converts
|
| +** the string to UTF-16 and then returns the number of bytes.
|
| +** ^If the result is a numeric value then sqlite3_column_bytes16() uses
|
| +** [sqlite3_snprintf()] to convert that value to a UTF-16 string and returns
|
| +** the number of bytes in that string.
|
| +** ^If the result is NULL, then sqlite3_column_bytes16() returns zero.
|
| **
|
| -** Strings returned by sqlite3_column_text() and sqlite3_column_text16(),
|
| -** even empty strings, are always zero terminated. The return
|
| -** value from sqlite3_column_blob() for a zero-length BLOB is an arbitrary
|
| -** pointer, possibly even a NULL pointer.
|
| +** ^The values returned by [sqlite3_column_bytes()] and
|
| +** [sqlite3_column_bytes16()] do not include the zero terminators at the end
|
| +** of the string. ^For clarity: the values returned by
|
| +** [sqlite3_column_bytes()] and [sqlite3_column_bytes16()] are the number of
|
| +** bytes in the string, not the number of characters.
|
| **
|
| -** The sqlite3_column_bytes16() routine is similar to sqlite3_column_bytes()
|
| -** but leaves the result in UTF-16 in native byte order instead of UTF-8.
|
| -** The zero terminator is not included in this count.
|
| +** ^Strings returned by sqlite3_column_text() and sqlite3_column_text16(),
|
| +** even empty strings, are always zero terminated. ^The return
|
| +** value from sqlite3_column_blob() for a zero-length BLOB is a NULL pointer.
|
| **
|
| -** The object returned by [sqlite3_column_value()] is an
|
| +** ^The object returned by [sqlite3_column_value()] is an
|
| ** [unprotected sqlite3_value] object. An unprotected sqlite3_value object
|
| ** may only be used with [sqlite3_bind_value()] and [sqlite3_result_value()].
|
| ** If the [unprotected sqlite3_value] object returned by
|
| @@ -3000,10 +3161,10 @@ SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt);
|
| ** to routines like [sqlite3_value_int()], [sqlite3_value_text()],
|
| ** or [sqlite3_value_bytes()], then the behavior is undefined.
|
| **
|
| -** These routines attempt to convert the value where appropriate. For
|
| +** These routines attempt to convert the value where appropriate. ^For
|
| ** example, if the internal representation is FLOAT and a text result
|
| ** is requested, [sqlite3_snprintf()] is used internally to perform the
|
| -** conversion automatically. The following table details the conversions
|
| +** conversion automatically. ^(The following table details the conversions
|
| ** that are applied:
|
| **
|
| ** <blockquote>
|
| @@ -3027,7 +3188,7 @@ SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt);
|
| ** <tr><td> BLOB <td> FLOAT <td> Convert to TEXT then use atof()
|
| ** <tr><td> BLOB <td> TEXT <td> Add a zero terminator if needed
|
| ** </table>
|
| -** </blockquote>
|
| +** </blockquote>)^
|
| **
|
| ** The table above makes reference to standard C library functions atoi()
|
| ** and atof(). SQLite does not really use these functions. It has its
|
| @@ -3053,9 +3214,9 @@ SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt);
|
| ** to UTF-8.</li>
|
| ** </ul>
|
| **
|
| -** Conversions between UTF-16be and UTF-16le are always done in place and do
|
| +** ^Conversions between UTF-16be and UTF-16le are always done in place and do
|
| ** not invalidate a prior pointer, though of course the content of the buffer
|
| -** that the prior pointer points to will have been modified. Other kinds
|
| +** that the prior pointer references will have been modified. Other kinds
|
| ** of conversion are done in place when it is possible, but sometimes they
|
| ** are not possible and in those cases prior pointers are invalidated.
|
| **
|
| @@ -3076,22 +3237,18 @@ SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt);
|
| ** sqlite3_column_bytes16(), and do not mix calls to sqlite3_column_text16()
|
| ** with calls to sqlite3_column_bytes().
|
| **
|
| -** The pointers returned are valid until a type conversion occurs as
|
| +** ^The pointers returned are valid until a type conversion occurs as
|
| ** described above, or until [sqlite3_step()] or [sqlite3_reset()] or
|
| -** [sqlite3_finalize()] is called. The memory space used to hold strings
|
| +** [sqlite3_finalize()] is called. ^The memory space used to hold strings
|
| ** and BLOBs is freed automatically. Do <b>not</b> pass the pointers returned
|
| ** [sqlite3_column_blob()], [sqlite3_column_text()], etc. into
|
| ** [sqlite3_free()].
|
| **
|
| -** If a memory allocation error occurs during the evaluation of any
|
| +** ^(If a memory allocation error occurs during the evaluation of any
|
| ** of these routines, a default value is returned. The default value
|
| ** is either the integer 0, the floating point number 0.0, or a NULL
|
| ** pointer. Subsequent calls to [sqlite3_errcode()] will return
|
| -** [SQLITE_NOMEM].
|
| -**
|
| -** Requirements:
|
| -** [H13803] [H13806] [H13809] [H13812] [H13815] [H13818] [H13821] [H13824]
|
| -** [H13827] [H13830]
|
| +** [SQLITE_NOMEM].)^
|
| */
|
| SQLITE_API const void *sqlite3_column_blob(sqlite3_stmt*, int iCol);
|
| SQLITE_API int sqlite3_column_bytes(sqlite3_stmt*, int iCol);
|
| @@ -3105,135 +3262,142 @@ SQLITE_API int sqlite3_column_type(sqlite3_stmt*, int iCol);
|
| SQLITE_API sqlite3_value *sqlite3_column_value(sqlite3_stmt*, int iCol);
|
|
|
| /*
|
| -** CAPI3REF: Destroy A Prepared Statement Object {H13300} <S70300><S30100>
|
| +** CAPI3REF: Destroy A Prepared Statement Object
|
| +**
|
| +** ^The sqlite3_finalize() function is called to delete a [prepared statement].
|
| +** ^If the most recent evaluation of the statement encountered no errors or
|
| +** or if the statement is never been evaluated, then sqlite3_finalize() returns
|
| +** SQLITE_OK. ^If the most recent evaluation of statement S failed, then
|
| +** sqlite3_finalize(S) returns the appropriate [error code] or
|
| +** [extended error code].
|
| **
|
| -** The sqlite3_finalize() function is called to delete a [prepared statement].
|
| -** If the statement was executed successfully or not executed at all, then
|
| -** SQLITE_OK is returned. If execution of the statement failed then an
|
| -** [error code] or [extended error code] is returned.
|
| +** ^The sqlite3_finalize(S) routine can be called at any point during
|
| +** the life cycle of [prepared statement] S:
|
| +** before statement S is ever evaluated, after
|
| +** one or more calls to [sqlite3_reset()], or after any call
|
| +** to [sqlite3_step()] regardless of whether or not the statement has
|
| +** completed execution.
|
| **
|
| -** This routine can be called at any point during the execution of the
|
| -** [prepared statement]. If the virtual machine has not
|
| -** completed execution when this routine is called, that is like
|
| -** encountering an error or an [sqlite3_interrupt | interrupt].
|
| -** Incomplete updates may be rolled back and transactions canceled,
|
| -** depending on the circumstances, and the
|
| -** [error code] returned will be [SQLITE_ABORT].
|
| +** ^Invoking sqlite3_finalize() on a NULL pointer is a harmless no-op.
|
| **
|
| -** Requirements:
|
| -** [H11302] [H11304]
|
| +** The application must finalize every [prepared statement] in order to avoid
|
| +** resource leaks. It is a grievous error for the application to try to use
|
| +** a prepared statement after it has been finalized. Any use of a prepared
|
| +** statement after it has been finalized can result in undefined and
|
| +** undesirable behavior such as segfaults and heap corruption.
|
| */
|
| SQLITE_API int sqlite3_finalize(sqlite3_stmt *pStmt);
|
|
|
| /*
|
| -** CAPI3REF: Reset A Prepared Statement Object {H13330} <S70300>
|
| +** CAPI3REF: Reset A Prepared Statement Object
|
| **
|
| ** The sqlite3_reset() function is called to reset a [prepared statement]
|
| ** object back to its initial state, ready to be re-executed.
|
| -** Any SQL statement variables that had values bound to them using
|
| +** ^Any SQL statement variables that had values bound to them using
|
| ** the [sqlite3_bind_blob | sqlite3_bind_*() API] retain their values.
|
| ** Use [sqlite3_clear_bindings()] to reset the bindings.
|
| **
|
| -** {H11332} The [sqlite3_reset(S)] interface resets the [prepared statement] S
|
| -** back to the beginning of its program.
|
| +** ^The [sqlite3_reset(S)] interface resets the [prepared statement] S
|
| +** back to the beginning of its program.
|
| **
|
| -** {H11334} If the most recent call to [sqlite3_step(S)] for the
|
| -** [prepared statement] S returned [SQLITE_ROW] or [SQLITE_DONE],
|
| -** or if [sqlite3_step(S)] has never before been called on S,
|
| -** then [sqlite3_reset(S)] returns [SQLITE_OK].
|
| +** ^If the most recent call to [sqlite3_step(S)] for the
|
| +** [prepared statement] S returned [SQLITE_ROW] or [SQLITE_DONE],
|
| +** or if [sqlite3_step(S)] has never before been called on S,
|
| +** then [sqlite3_reset(S)] returns [SQLITE_OK].
|
| **
|
| -** {H11336} If the most recent call to [sqlite3_step(S)] for the
|
| -** [prepared statement] S indicated an error, then
|
| -** [sqlite3_reset(S)] returns an appropriate [error code].
|
| +** ^If the most recent call to [sqlite3_step(S)] for the
|
| +** [prepared statement] S indicated an error, then
|
| +** [sqlite3_reset(S)] returns an appropriate [error code].
|
| **
|
| -** {H11338} The [sqlite3_reset(S)] interface does not change the values
|
| -** of any [sqlite3_bind_blob|bindings] on the [prepared statement] S.
|
| +** ^The [sqlite3_reset(S)] interface does not change the values
|
| +** of any [sqlite3_bind_blob|bindings] on the [prepared statement] S.
|
| */
|
| SQLITE_API int sqlite3_reset(sqlite3_stmt *pStmt);
|
|
|
| /*
|
| -** CAPI3REF: Create Or Redefine SQL Functions {H16100} <S20200>
|
| +** CAPI3REF: Create Or Redefine SQL Functions
|
| ** KEYWORDS: {function creation routines}
|
| ** KEYWORDS: {application-defined SQL function}
|
| ** KEYWORDS: {application-defined SQL functions}
|
| **
|
| -** These two functions (collectively known as "function creation routines")
|
| +** ^These functions (collectively known as "function creation routines")
|
| ** are used to add SQL functions or aggregates or to redefine the behavior
|
| -** of existing SQL functions or aggregates. The only difference between the
|
| -** two is that the second parameter, the name of the (scalar) function or
|
| -** aggregate, is encoded in UTF-8 for sqlite3_create_function() and UTF-16
|
| -** for sqlite3_create_function16().
|
| -**
|
| -** The first parameter is the [database connection] to which the SQL
|
| -** function is to be added. If a single program uses more than one database
|
| -** connection internally, then SQL functions must be added individually to
|
| -** each database connection.
|
| -**
|
| -** The second parameter is the name of the SQL function to be created or
|
| -** redefined. The length of the name is limited to 255 bytes, exclusive of
|
| -** the zero-terminator. Note that the name length limit is in bytes, not
|
| -** characters. Any attempt to create a function with a longer name
|
| -** will result in [SQLITE_ERROR] being returned.
|
| -**
|
| -** The third parameter (nArg)
|
| +** of existing SQL functions or aggregates. The only differences between
|
| +** these routines are the text encoding expected for
|
| +** the the second parameter (the name of the function being created)
|
| +** and the presence or absence of a destructor callback for
|
| +** the application data pointer.
|
| +**
|
| +** ^The first parameter is the [database connection] to which the SQL
|
| +** function is to be added. ^If an application uses more than one database
|
| +** connection then application-defined SQL functions must be added
|
| +** to each database connection separately.
|
| +**
|
| +** ^The second parameter is the name of the SQL function to be created or
|
| +** redefined. ^The length of the name is limited to 255 bytes in a UTF-8
|
| +** representation, exclusive of the zero-terminator. ^Note that the name
|
| +** length limit is in UTF-8 bytes, not characters nor UTF-16 bytes.
|
| +** ^Any attempt to create a function with a longer name
|
| +** will result in [SQLITE_MISUSE] being returned.
|
| +**
|
| +** ^The third parameter (nArg)
|
| ** is the number of arguments that the SQL function or
|
| -** aggregate takes. If this parameter is -1, then the SQL function or
|
| +** aggregate takes. ^If this parameter is -1, then the SQL function or
|
| ** aggregate may take any number of arguments between 0 and the limit
|
| ** set by [sqlite3_limit]([SQLITE_LIMIT_FUNCTION_ARG]). If the third
|
| ** parameter is less than -1 or greater than 127 then the behavior is
|
| ** undefined.
|
| **
|
| -** The fourth parameter, eTextRep, specifies what
|
| +** ^The fourth parameter, eTextRep, specifies what
|
| ** [SQLITE_UTF8 | text encoding] this SQL function prefers for
|
| -** its parameters. Any SQL function implementation should be able to work
|
| -** work with UTF-8, UTF-16le, or UTF-16be. But some implementations may be
|
| -** more efficient with one encoding than another. An application may
|
| +** its parameters. Every SQL function implementation must be able to work
|
| +** with UTF-8, UTF-16le, or UTF-16be. But some implementations may be
|
| +** more efficient with one encoding than another. ^An application may
|
| ** invoke sqlite3_create_function() or sqlite3_create_function16() multiple
|
| ** times with the same function but with different values of eTextRep.
|
| -** When multiple implementations of the same function are available, SQLite
|
| +** ^When multiple implementations of the same function are available, SQLite
|
| ** will pick the one that involves the least amount of data conversion.
|
| ** If there is only a single implementation which does not care what text
|
| ** encoding is used, then the fourth argument should be [SQLITE_ANY].
|
| **
|
| -** The fifth parameter is an arbitrary pointer. The implementation of the
|
| -** function can gain access to this pointer using [sqlite3_user_data()].
|
| +** ^(The fifth parameter is an arbitrary pointer. The implementation of the
|
| +** function can gain access to this pointer using [sqlite3_user_data()].)^
|
| **
|
| -** The seventh, eighth and ninth parameters, xFunc, xStep and xFinal, are
|
| +** ^The seventh, eighth and ninth parameters, xFunc, xStep and xFinal, are
|
| ** pointers to C-language functions that implement the SQL function or
|
| -** aggregate. A scalar SQL function requires an implementation of the xFunc
|
| -** callback only, NULL pointers should be passed as the xStep and xFinal
|
| -** parameters. An aggregate SQL function requires an implementation of xStep
|
| -** and xFinal and NULL should be passed for xFunc. To delete an existing
|
| -** SQL function or aggregate, pass NULL for all three function callbacks.
|
| -**
|
| -** It is permitted to register multiple implementations of the same
|
| +** aggregate. ^A scalar SQL function requires an implementation of the xFunc
|
| +** callback only; NULL pointers must be passed as the xStep and xFinal
|
| +** parameters. ^An aggregate SQL function requires an implementation of xStep
|
| +** and xFinal and NULL pointer must be passed for xFunc. ^To delete an existing
|
| +** SQL function or aggregate, pass NULL poiners for all three function
|
| +** callbacks.
|
| +**
|
| +** ^If the tenth parameter to sqlite3_create_function_v2() is not NULL,
|
| +** then it is invoked when the function is deleted, either by being
|
| +** overloaded or when the database connection closes.
|
| +** ^When the destructure callback of the tenth parameter is invoked, it
|
| +** is passed a single argument which is a copy of the pointer which was
|
| +** the fifth parameter to sqlite3_create_function_v2().
|
| +**
|
| +** ^It is permitted to register multiple implementations of the same
|
| ** functions with the same name but with either differing numbers of
|
| -** arguments or differing preferred text encodings. SQLite will use
|
| +** arguments or differing preferred text encodings. ^SQLite will use
|
| ** the implementation that most closely matches the way in which the
|
| -** SQL function is used. A function implementation with a non-negative
|
| +** SQL function is used. ^A function implementation with a non-negative
|
| ** nArg parameter is a better match than a function implementation with
|
| -** a negative nArg. A function where the preferred text encoding
|
| +** a negative nArg. ^A function where the preferred text encoding
|
| ** matches the database encoding is a better
|
| ** match than a function where the encoding is different.
|
| -** A function where the encoding difference is between UTF16le and UTF16be
|
| +** ^A function where the encoding difference is between UTF16le and UTF16be
|
| ** is a closer match than a function where the encoding difference is
|
| ** between UTF8 and UTF16.
|
| **
|
| -** Built-in functions may be overloaded by new application-defined functions.
|
| -** The first application-defined function with a given name overrides all
|
| -** built-in functions in the same [database connection] with the same name.
|
| -** Subsequent application-defined functions of the same name only override
|
| -** prior application-defined functions that are an exact match for the
|
| -** number of parameters and preferred encoding.
|
| +** ^Built-in functions may be overloaded by new application-defined functions.
|
| **
|
| -** An application-defined function is permitted to call other
|
| +** ^An application-defined function is permitted to call other
|
| ** SQLite interfaces. However, such calls must not
|
| ** close the database connection nor finalize or reset the prepared
|
| ** statement in which the function is running.
|
| -**
|
| -** Requirements:
|
| -** [H16103] [H16106] [H16109] [H16112] [H16118] [H16121] [H16127]
|
| -** [H16130] [H16133] [H16136] [H16139] [H16142]
|
| */
|
| SQLITE_API int sqlite3_create_function(
|
| sqlite3 *db,
|
| @@ -3255,9 +3419,20 @@ SQLITE_API int sqlite3_create_function16(
|
| void (*xStep)(sqlite3_context*,int,sqlite3_value**),
|
| void (*xFinal)(sqlite3_context*)
|
| );
|
| +SQLITE_API int sqlite3_create_function_v2(
|
| + sqlite3 *db,
|
| + const char *zFunctionName,
|
| + int nArg,
|
| + int eTextRep,
|
| + void *pApp,
|
| + void (*xFunc)(sqlite3_context*,int,sqlite3_value**),
|
| + void (*xStep)(sqlite3_context*,int,sqlite3_value**),
|
| + void (*xFinal)(sqlite3_context*),
|
| + void(*xDestroy)(void*)
|
| +);
|
|
|
| /*
|
| -** CAPI3REF: Text Encodings {H10267} <S50200> <H16100>
|
| +** CAPI3REF: Text Encodings
|
| **
|
| ** These constant define integer codes that represent the various
|
| ** text encodings supported by SQLite.
|
| @@ -3289,7 +3464,7 @@ SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int6
|
| #endif
|
|
|
| /*
|
| -** CAPI3REF: Obtaining SQL Function Parameter Values {H15100} <S20200>
|
| +** CAPI3REF: Obtaining SQL Function Parameter Values
|
| **
|
| ** The C-language implementation of SQL functions and aggregates uses
|
| ** this set of interface routines to access the parameter values on
|
| @@ -3307,22 +3482,22 @@ SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int6
|
| ** Any attempt to use these routines on an [unprotected sqlite3_value]
|
| ** object results in undefined behavior.
|
| **
|
| -** These routines work just like the corresponding [column access functions]
|
| +** ^These routines work just like the corresponding [column access functions]
|
| ** except that these routines take a single [protected sqlite3_value] object
|
| ** pointer instead of a [sqlite3_stmt*] pointer and an integer column number.
|
| **
|
| -** The sqlite3_value_text16() interface extracts a UTF-16 string
|
| -** in the native byte-order of the host machine. The
|
| +** ^The sqlite3_value_text16() interface extracts a UTF-16 string
|
| +** in the native byte-order of the host machine. ^The
|
| ** sqlite3_value_text16be() and sqlite3_value_text16le() interfaces
|
| ** extract UTF-16 strings as big-endian and little-endian respectively.
|
| **
|
| -** The sqlite3_value_numeric_type() interface attempts to apply
|
| +** ^(The sqlite3_value_numeric_type() interface attempts to apply
|
| ** numeric affinity to the value. This means that an attempt is
|
| ** made to convert the value to an integer or floating point. If
|
| ** such a conversion is possible without loss of information (in other
|
| ** words, if the value is a string that looks like a number)
|
| ** then the conversion is performed. Otherwise no conversion occurs.
|
| -** The [SQLITE_INTEGER | datatype] after conversion is returned.
|
| +** The [SQLITE_INTEGER | datatype] after conversion is returned.)^
|
| **
|
| ** Please pay particular attention to the fact that the pointer returned
|
| ** from [sqlite3_value_blob()], [sqlite3_value_text()], or
|
| @@ -3332,10 +3507,6 @@ SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int6
|
| **
|
| ** These routines must be called from the same thread as
|
| ** the SQL function that supplied the [sqlite3_value*] parameters.
|
| -**
|
| -** Requirements:
|
| -** [H15103] [H15106] [H15109] [H15112] [H15115] [H15118] [H15121] [H15124]
|
| -** [H15127] [H15130] [H15133] [H15136]
|
| */
|
| SQLITE_API const void *sqlite3_value_blob(sqlite3_value*);
|
| SQLITE_API int sqlite3_value_bytes(sqlite3_value*);
|
| @@ -3351,66 +3522,73 @@ SQLITE_API int sqlite3_value_type(sqlite3_value*);
|
| SQLITE_API int sqlite3_value_numeric_type(sqlite3_value*);
|
|
|
| /*
|
| -** CAPI3REF: Obtain Aggregate Function Context {H16210} <S20200>
|
| +** CAPI3REF: Obtain Aggregate Function Context
|
| +**
|
| +** Implementations of aggregate SQL functions use this
|
| +** routine to allocate memory for storing their state.
|
| +**
|
| +** ^The first time the sqlite3_aggregate_context(C,N) routine is called
|
| +** for a particular aggregate function, SQLite
|
| +** allocates N of memory, zeroes out that memory, and returns a pointer
|
| +** to the new memory. ^On second and subsequent calls to
|
| +** sqlite3_aggregate_context() for the same aggregate function instance,
|
| +** the same buffer is returned. Sqlite3_aggregate_context() is normally
|
| +** called once for each invocation of the xStep callback and then one
|
| +** last time when the xFinal callback is invoked. ^(When no rows match
|
| +** an aggregate query, the xStep() callback of the aggregate function
|
| +** implementation is never called and xFinal() is called exactly once.
|
| +** In those cases, sqlite3_aggregate_context() might be called for the
|
| +** first time from within xFinal().)^
|
| **
|
| -** The implementation of aggregate SQL functions use this routine to allocate
|
| -** a structure for storing their state.
|
| +** ^The sqlite3_aggregate_context(C,N) routine returns a NULL pointer if N is
|
| +** less than or equal to zero or if a memory allocate error occurs.
|
| **
|
| -** The first time the sqlite3_aggregate_context() routine is called for a
|
| -** particular aggregate, SQLite allocates nBytes of memory, zeroes out that
|
| -** memory, and returns a pointer to it. On second and subsequent calls to
|
| -** sqlite3_aggregate_context() for the same aggregate function index,
|
| -** the same buffer is returned. The implementation of the aggregate can use
|
| -** the returned buffer to accumulate data.
|
| +** ^(The amount of space allocated by sqlite3_aggregate_context(C,N) is
|
| +** determined by the N parameter on first successful call. Changing the
|
| +** value of N in subsequent call to sqlite3_aggregate_context() within
|
| +** the same aggregate function instance will not resize the memory
|
| +** allocation.)^
|
| **
|
| -** SQLite automatically frees the allocated buffer when the aggregate
|
| -** query concludes.
|
| +** ^SQLite automatically frees the memory allocated by
|
| +** sqlite3_aggregate_context() when the aggregate query concludes.
|
| **
|
| -** The first parameter should be a copy of the
|
| +** The first parameter must be a copy of the
|
| ** [sqlite3_context | SQL function context] that is the first parameter
|
| -** to the callback routine that implements the aggregate function.
|
| +** to the xStep or xFinal callback routine that implements the aggregate
|
| +** function.
|
| **
|
| ** This routine must be called from the same thread in which
|
| ** the aggregate SQL function is running.
|
| -**
|
| -** Requirements:
|
| -** [H16211] [H16213] [H16215] [H16217]
|
| */
|
| SQLITE_API void *sqlite3_aggregate_context(sqlite3_context*, int nBytes);
|
|
|
| /*
|
| -** CAPI3REF: User Data For Functions {H16240} <S20200>
|
| +** CAPI3REF: User Data For Functions
|
| **
|
| -** The sqlite3_user_data() interface returns a copy of
|
| +** ^The sqlite3_user_data() interface returns a copy of
|
| ** the pointer that was the pUserData parameter (the 5th parameter)
|
| ** of the [sqlite3_create_function()]
|
| ** and [sqlite3_create_function16()] routines that originally
|
| -** registered the application defined function. {END}
|
| +** registered the application defined function.
|
| **
|
| ** This routine must be called from the same thread in which
|
| ** the application-defined function is running.
|
| -**
|
| -** Requirements:
|
| -** [H16243]
|
| */
|
| SQLITE_API void *sqlite3_user_data(sqlite3_context*);
|
|
|
| /*
|
| -** CAPI3REF: Database Connection For Functions {H16250} <S60600><S20200>
|
| +** CAPI3REF: Database Connection For Functions
|
| **
|
| -** The sqlite3_context_db_handle() interface returns a copy of
|
| +** ^The sqlite3_context_db_handle() interface returns a copy of
|
| ** the pointer to the [database connection] (the 1st parameter)
|
| ** of the [sqlite3_create_function()]
|
| ** and [sqlite3_create_function16()] routines that originally
|
| ** registered the application defined function.
|
| -**
|
| -** Requirements:
|
| -** [H16253]
|
| */
|
| SQLITE_API sqlite3 *sqlite3_context_db_handle(sqlite3_context*);
|
|
|
| /*
|
| -** CAPI3REF: Function Auxiliary Data {H16270} <S20200>
|
| +** CAPI3REF: Function Auxiliary Data
|
| **
|
| ** The following two functions may be used by scalar SQL functions to
|
| ** associate metadata with argument values. If the same value is passed to
|
| @@ -3423,48 +3601,45 @@ SQLITE_API sqlite3 *sqlite3_context_db_handle(sqlite3_context*);
|
| ** invocations of the same function so that the original pattern string
|
| ** does not need to be recompiled on each invocation.
|
| **
|
| -** The sqlite3_get_auxdata() interface returns a pointer to the metadata
|
| +** ^The sqlite3_get_auxdata() interface returns a pointer to the metadata
|
| ** associated by the sqlite3_set_auxdata() function with the Nth argument
|
| -** value to the application-defined function. If no metadata has been ever
|
| +** value to the application-defined function. ^If no metadata has been ever
|
| ** been set for the Nth argument of the function, or if the corresponding
|
| ** function parameter has changed since the meta-data was set,
|
| ** then sqlite3_get_auxdata() returns a NULL pointer.
|
| **
|
| -** The sqlite3_set_auxdata() interface saves the metadata
|
| +** ^The sqlite3_set_auxdata() interface saves the metadata
|
| ** pointed to by its 3rd parameter as the metadata for the N-th
|
| ** argument of the application-defined function. Subsequent
|
| ** calls to sqlite3_get_auxdata() might return this data, if it has
|
| ** not been destroyed.
|
| -** If it is not NULL, SQLite will invoke the destructor
|
| +** ^If it is not NULL, SQLite will invoke the destructor
|
| ** function given by the 4th parameter to sqlite3_set_auxdata() on
|
| ** the metadata when the corresponding function parameter changes
|
| ** or when the SQL statement completes, whichever comes first.
|
| **
|
| ** SQLite is free to call the destructor and drop metadata on any
|
| -** parameter of any function at any time. The only guarantee is that
|
| +** parameter of any function at any time. ^The only guarantee is that
|
| ** the destructor will be called before the metadata is dropped.
|
| **
|
| -** In practice, metadata is preserved between function calls for
|
| +** ^(In practice, metadata is preserved between function calls for
|
| ** expressions that are constant at compile time. This includes literal
|
| -** values and SQL variables.
|
| +** values and [parameters].)^
|
| **
|
| ** These routines must be called from the same thread in which
|
| ** the SQL function is running.
|
| -**
|
| -** Requirements:
|
| -** [H16272] [H16274] [H16276] [H16277] [H16278] [H16279]
|
| */
|
| SQLITE_API void *sqlite3_get_auxdata(sqlite3_context*, int N);
|
| SQLITE_API void sqlite3_set_auxdata(sqlite3_context*, int N, void*, void (*)(void*));
|
|
|
|
|
| /*
|
| -** CAPI3REF: Constants Defining Special Destructor Behavior {H10280} <S30100>
|
| +** CAPI3REF: Constants Defining Special Destructor Behavior
|
| **
|
| ** These are special values for the destructor that is passed in as the
|
| -** final argument to routines like [sqlite3_result_blob()]. If the destructor
|
| +** final argument to routines like [sqlite3_result_blob()]. ^If the destructor
|
| ** argument is SQLITE_STATIC, it means that the content pointer is constant
|
| -** and will never change. It does not need to be destroyed. The
|
| +** and will never change. It does not need to be destroyed. ^The
|
| ** SQLITE_TRANSIENT value means that the content will likely change in
|
| ** the near future and that SQLite should make its own private copy of
|
| ** the content before returning.
|
| @@ -3477,7 +3652,7 @@ typedef void (*sqlite3_destructor_type)(void*);
|
| #define SQLITE_TRANSIENT ((sqlite3_destructor_type)-1)
|
|
|
| /*
|
| -** CAPI3REF: Setting The Result Of An SQL Function {H16400} <S20200>
|
| +** CAPI3REF: Setting The Result Of An SQL Function
|
| **
|
| ** These routines are used by the xFunc or xFinal callbacks that
|
| ** implement SQL functions and aggregates. See
|
| @@ -3488,103 +3663,98 @@ typedef void (*sqlite3_destructor_type)(void*);
|
| ** functions used to bind values to host parameters in prepared statements.
|
| ** Refer to the [SQL parameter] documentation for additional information.
|
| **
|
| -** The sqlite3_result_blob() interface sets the result from
|
| +** ^The sqlite3_result_blob() interface sets the result from
|
| ** an application-defined function to be the BLOB whose content is pointed
|
| ** to by the second parameter and which is N bytes long where N is the
|
| ** third parameter.
|
| **
|
| -** The sqlite3_result_zeroblob() interfaces set the result of
|
| +** ^The sqlite3_result_zeroblob() interfaces set the result of
|
| ** the application-defined function to be a BLOB containing all zero
|
| ** bytes and N bytes in size, where N is the value of the 2nd parameter.
|
| **
|
| -** The sqlite3_result_double() interface sets the result from
|
| +** ^The sqlite3_result_double() interface sets the result from
|
| ** an application-defined function to be a floating point value specified
|
| ** by its 2nd argument.
|
| **
|
| -** The sqlite3_result_error() and sqlite3_result_error16() functions
|
| +** ^The sqlite3_result_error() and sqlite3_result_error16() functions
|
| ** cause the implemented SQL function to throw an exception.
|
| -** SQLite uses the string pointed to by the
|
| +** ^SQLite uses the string pointed to by the
|
| ** 2nd parameter of sqlite3_result_error() or sqlite3_result_error16()
|
| -** as the text of an error message. SQLite interprets the error
|
| -** message string from sqlite3_result_error() as UTF-8. SQLite
|
| +** as the text of an error message. ^SQLite interprets the error
|
| +** message string from sqlite3_result_error() as UTF-8. ^SQLite
|
| ** interprets the string from sqlite3_result_error16() as UTF-16 in native
|
| -** byte order. If the third parameter to sqlite3_result_error()
|
| +** byte order. ^If the third parameter to sqlite3_result_error()
|
| ** or sqlite3_result_error16() is negative then SQLite takes as the error
|
| ** message all text up through the first zero character.
|
| -** If the third parameter to sqlite3_result_error() or
|
| +** ^If the third parameter to sqlite3_result_error() or
|
| ** sqlite3_result_error16() is non-negative then SQLite takes that many
|
| ** bytes (not characters) from the 2nd parameter as the error message.
|
| -** The sqlite3_result_error() and sqlite3_result_error16()
|
| +** ^The sqlite3_result_error() and sqlite3_result_error16()
|
| ** routines make a private copy of the error message text before
|
| ** they return. Hence, the calling function can deallocate or
|
| ** modify the text after they return without harm.
|
| -** The sqlite3_result_error_code() function changes the error code
|
| -** returned by SQLite as a result of an error in a function. By default,
|
| -** the error code is SQLITE_ERROR. A subsequent call to sqlite3_result_error()
|
| +** ^The sqlite3_result_error_code() function changes the error code
|
| +** returned by SQLite as a result of an error in a function. ^By default,
|
| +** the error code is SQLITE_ERROR. ^A subsequent call to sqlite3_result_error()
|
| ** or sqlite3_result_error16() resets the error code to SQLITE_ERROR.
|
| **
|
| -** The sqlite3_result_toobig() interface causes SQLite to throw an error
|
| -** indicating that a string or BLOB is to long to represent.
|
| +** ^The sqlite3_result_toobig() interface causes SQLite to throw an error
|
| +** indicating that a string or BLOB is too long to represent.
|
| **
|
| -** The sqlite3_result_nomem() interface causes SQLite to throw an error
|
| +** ^The sqlite3_result_nomem() interface causes SQLite to throw an error
|
| ** indicating that a memory allocation failed.
|
| **
|
| -** The sqlite3_result_int() interface sets the return value
|
| +** ^The sqlite3_result_int() interface sets the return value
|
| ** of the application-defined function to be the 32-bit signed integer
|
| ** value given in the 2nd argument.
|
| -** The sqlite3_result_int64() interface sets the return value
|
| +** ^The sqlite3_result_int64() interface sets the return value
|
| ** of the application-defined function to be the 64-bit signed integer
|
| ** value given in the 2nd argument.
|
| **
|
| -** The sqlite3_result_null() interface sets the return value
|
| +** ^The sqlite3_result_null() interface sets the return value
|
| ** of the application-defined function to be NULL.
|
| **
|
| -** The sqlite3_result_text(), sqlite3_result_text16(),
|
| +** ^The sqlite3_result_text(), sqlite3_result_text16(),
|
| ** sqlite3_result_text16le(), and sqlite3_result_text16be() interfaces
|
| ** set the return value of the application-defined function to be
|
| ** a text string which is represented as UTF-8, UTF-16 native byte order,
|
| ** UTF-16 little endian, or UTF-16 big endian, respectively.
|
| -** SQLite takes the text result from the application from
|
| +** ^SQLite takes the text result from the application from
|
| ** the 2nd parameter of the sqlite3_result_text* interfaces.
|
| -** If the 3rd parameter to the sqlite3_result_text* interfaces
|
| +** ^If the 3rd parameter to the sqlite3_result_text* interfaces
|
| ** is negative, then SQLite takes result text from the 2nd parameter
|
| ** through the first zero character.
|
| -** If the 3rd parameter to the sqlite3_result_text* interfaces
|
| +** ^If the 3rd parameter to the sqlite3_result_text* interfaces
|
| ** is non-negative, then as many bytes (not characters) of the text
|
| ** pointed to by the 2nd parameter are taken as the application-defined
|
| ** function result.
|
| -** If the 4th parameter to the sqlite3_result_text* interfaces
|
| +** ^If the 4th parameter to the sqlite3_result_text* interfaces
|
| ** or sqlite3_result_blob is a non-NULL pointer, then SQLite calls that
|
| ** function as the destructor on the text or BLOB result when it has
|
| ** finished using that result.
|
| -** If the 4th parameter to the sqlite3_result_text* interfaces or to
|
| +** ^If the 4th parameter to the sqlite3_result_text* interfaces or to
|
| ** sqlite3_result_blob is the special constant SQLITE_STATIC, then SQLite
|
| ** assumes that the text or BLOB result is in constant space and does not
|
| ** copy the content of the parameter nor call a destructor on the content
|
| ** when it has finished using that result.
|
| -** If the 4th parameter to the sqlite3_result_text* interfaces
|
| +** ^If the 4th parameter to the sqlite3_result_text* interfaces
|
| ** or sqlite3_result_blob is the special constant SQLITE_TRANSIENT
|
| ** then SQLite makes a copy of the result into space obtained from
|
| ** from [sqlite3_malloc()] before it returns.
|
| **
|
| -** The sqlite3_result_value() interface sets the result of
|
| +** ^The sqlite3_result_value() interface sets the result of
|
| ** the application-defined function to be a copy the
|
| -** [unprotected sqlite3_value] object specified by the 2nd parameter. The
|
| +** [unprotected sqlite3_value] object specified by the 2nd parameter. ^The
|
| ** sqlite3_result_value() interface makes a copy of the [sqlite3_value]
|
| ** so that the [sqlite3_value] specified in the parameter may change or
|
| ** be deallocated after sqlite3_result_value() returns without harm.
|
| -** A [protected sqlite3_value] object may always be used where an
|
| +** ^A [protected sqlite3_value] object may always be used where an
|
| ** [unprotected sqlite3_value] object is required, so either
|
| ** kind of [sqlite3_value] object can be used with this interface.
|
| **
|
| ** If these routines are called from within the different thread
|
| ** than the one containing the application-defined function that received
|
| ** the [sqlite3_context] pointer, the results are undefined.
|
| -**
|
| -** Requirements:
|
| -** [H16403] [H16406] [H16409] [H16412] [H16415] [H16418] [H16421] [H16424]
|
| -** [H16427] [H16430] [H16433] [H16436] [H16439] [H16442] [H16445] [H16448]
|
| -** [H16451] [H16454] [H16457] [H16460] [H16463]
|
| */
|
| SQLITE_API void sqlite3_result_blob(sqlite3_context*, const void*, int, void(*)(void*));
|
| SQLITE_API void sqlite3_result_double(sqlite3_context*, double);
|
| @@ -3604,67 +3774,87 @@ SQLITE_API void sqlite3_result_value(sqlite3_context*, sqlite3_value*);
|
| SQLITE_API void sqlite3_result_zeroblob(sqlite3_context*, int n);
|
|
|
| /*
|
| -** CAPI3REF: Define New Collating Sequences {H16600} <S20300>
|
| +** CAPI3REF: Define New Collating Sequences
|
| **
|
| -** These functions are used to add new collation sequences to the
|
| -** [database connection] specified as the first argument.
|
| +** ^These functions add, remove, or modify a [collation] associated
|
| +** with the [database connection] specified as the first argument.
|
| **
|
| -** The name of the new collation sequence is specified as a UTF-8 string
|
| +** ^The name of the collation is a UTF-8 string
|
| ** for sqlite3_create_collation() and sqlite3_create_collation_v2()
|
| -** and a UTF-16 string for sqlite3_create_collation16(). In all cases
|
| -** the name is passed as the second function argument.
|
| -**
|
| -** The third argument may be one of the constants [SQLITE_UTF8],
|
| -** [SQLITE_UTF16LE], or [SQLITE_UTF16BE], indicating that the user-supplied
|
| -** routine expects to be passed pointers to strings encoded using UTF-8,
|
| -** UTF-16 little-endian, or UTF-16 big-endian, respectively. The
|
| -** third argument might also be [SQLITE_UTF16] to indicate that the routine
|
| -** expects pointers to be UTF-16 strings in the native byte order, or the
|
| -** argument can be [SQLITE_UTF16_ALIGNED] if the
|
| -** the routine expects pointers to 16-bit word aligned strings
|
| -** of UTF-16 in the native byte order.
|
| -**
|
| -** A pointer to the user supplied routine must be passed as the fifth
|
| -** argument. If it is NULL, this is the same as deleting the collation
|
| -** sequence (so that SQLite cannot call it anymore).
|
| -** Each time the application supplied function is invoked, it is passed
|
| -** as its first parameter a copy of the void* passed as the fourth argument
|
| -** to sqlite3_create_collation() or sqlite3_create_collation16().
|
| -**
|
| -** The remaining arguments to the application-supplied routine are two strings,
|
| -** each represented by a (length, data) pair and encoded in the encoding
|
| -** that was passed as the third argument when the collation sequence was
|
| -** registered. {END} The application defined collation routine should
|
| -** return negative, zero or positive if the first string is less than,
|
| -** equal to, or greater than the second string. i.e. (STRING1 - STRING2).
|
| -**
|
| -** The sqlite3_create_collation_v2() works like sqlite3_create_collation()
|
| -** except that it takes an extra argument which is a destructor for
|
| -** the collation. The destructor is called when the collation is
|
| -** destroyed and is passed a copy of the fourth parameter void* pointer
|
| -** of the sqlite3_create_collation_v2().
|
| -** Collations are destroyed when they are overridden by later calls to the
|
| -** collation creation functions or when the [database connection] is closed
|
| -** using [sqlite3_close()].
|
| +** and a UTF-16 string in native byte order for sqlite3_create_collation16().
|
| +** ^Collation names that compare equal according to [sqlite3_strnicmp()] are
|
| +** considered to be the same name.
|
| **
|
| -** See also: [sqlite3_collation_needed()] and [sqlite3_collation_needed16()].
|
| +** ^(The third argument (eTextRep) must be one of the constants:
|
| +** <ul>
|
| +** <li> [SQLITE_UTF8],
|
| +** <li> [SQLITE_UTF16LE],
|
| +** <li> [SQLITE_UTF16BE],
|
| +** <li> [SQLITE_UTF16], or
|
| +** <li> [SQLITE_UTF16_ALIGNED].
|
| +** </ul>)^
|
| +** ^The eTextRep argument determines the encoding of strings passed
|
| +** to the collating function callback, xCallback.
|
| +** ^The [SQLITE_UTF16] and [SQLITE_UTF16_ALIGNED] values for eTextRep
|
| +** force strings to be UTF16 with native byte order.
|
| +** ^The [SQLITE_UTF16_ALIGNED] value for eTextRep forces strings to begin
|
| +** on an even byte address.
|
| +**
|
| +** ^The fourth argument, pArg, is a application data pointer that is passed
|
| +** through as the first argument to the collating function callback.
|
| +**
|
| +** ^The fifth argument, xCallback, is a pointer to the collating function.
|
| +** ^Multiple collating functions can be registered using the same name but
|
| +** with different eTextRep parameters and SQLite will use whichever
|
| +** function requires the least amount of data transformation.
|
| +** ^If the xCallback argument is NULL then the collating function is
|
| +** deleted. ^When all collating functions having the same name are deleted,
|
| +** that collation is no longer usable.
|
| +**
|
| +** ^The collating function callback is invoked with a copy of the pArg
|
| +** application data pointer and with two strings in the encoding specified
|
| +** by the eTextRep argument. The collating function must return an
|
| +** integer that is negative, zero, or positive
|
| +** if the first string is less than, equal to, or greater than the second,
|
| +** respectively. A collating function must alway return the same answer
|
| +** given the same inputs. If two or more collating functions are registered
|
| +** to the same collation name (using different eTextRep values) then all
|
| +** must give an equivalent answer when invoked with equivalent strings.
|
| +** The collating function must obey the following properties for all
|
| +** strings A, B, and C:
|
| **
|
| -** Requirements:
|
| -** [H16603] [H16604] [H16606] [H16609] [H16612] [H16615] [H16618] [H16621]
|
| -** [H16624] [H16627] [H16630]
|
| +** <ol>
|
| +** <li> If A==B then B==A.
|
| +** <li> If A==B and B==C then A==C.
|
| +** <li> If A<B THEN B>A.
|
| +** <li> If A<B and B<C then A<C.
|
| +** </ol>
|
| +**
|
| +** If a collating function fails any of the above constraints and that
|
| +** collating function is registered and used, then the behavior of SQLite
|
| +** is undefined.
|
| +**
|
| +** ^The sqlite3_create_collation_v2() works like sqlite3_create_collation()
|
| +** with the addition that the xDestroy callback is invoked on pArg when
|
| +** the collating function is deleted.
|
| +** ^Collating functions are deleted when they are overridden by later
|
| +** calls to the collation creation functions or when the
|
| +** [database connection] is closed using [sqlite3_close()].
|
| +**
|
| +** See also: [sqlite3_collation_needed()] and [sqlite3_collation_needed16()].
|
| */
|
| SQLITE_API int sqlite3_create_collation(
|
| sqlite3*,
|
| const char *zName,
|
| int eTextRep,
|
| - void*,
|
| + void *pArg,
|
| int(*xCompare)(void*,int,const void*,int,const void*)
|
| );
|
| SQLITE_API int sqlite3_create_collation_v2(
|
| sqlite3*,
|
| const char *zName,
|
| int eTextRep,
|
| - void*,
|
| + void *pArg,
|
| int(*xCompare)(void*,int,const void*,int,const void*),
|
| void(*xDestroy)(void*)
|
| );
|
| @@ -3672,38 +3862,35 @@ SQLITE_API int sqlite3_create_collation16(
|
| sqlite3*,
|
| const void *zName,
|
| int eTextRep,
|
| - void*,
|
| + void *pArg,
|
| int(*xCompare)(void*,int,const void*,int,const void*)
|
| );
|
|
|
| /*
|
| -** CAPI3REF: Collation Needed Callbacks {H16700} <S20300>
|
| +** CAPI3REF: Collation Needed Callbacks
|
| **
|
| -** To avoid having to register all collation sequences before a database
|
| +** ^To avoid having to register all collation sequences before a database
|
| ** can be used, a single callback function may be registered with the
|
| -** [database connection] to be called whenever an undefined collation
|
| +** [database connection] to be invoked whenever an undefined collation
|
| ** sequence is required.
|
| **
|
| -** If the function is registered using the sqlite3_collation_needed() API,
|
| +** ^If the function is registered using the sqlite3_collation_needed() API,
|
| ** then it is passed the names of undefined collation sequences as strings
|
| -** encoded in UTF-8. {H16703} If sqlite3_collation_needed16() is used,
|
| +** encoded in UTF-8. ^If sqlite3_collation_needed16() is used,
|
| ** the names are passed as UTF-16 in machine native byte order.
|
| -** A call to either function replaces any existing callback.
|
| +** ^A call to either function replaces the existing collation-needed callback.
|
| **
|
| -** When the callback is invoked, the first argument passed is a copy
|
| +** ^(When the callback is invoked, the first argument passed is a copy
|
| ** of the second argument to sqlite3_collation_needed() or
|
| ** sqlite3_collation_needed16(). The second argument is the database
|
| ** connection. The third argument is one of [SQLITE_UTF8], [SQLITE_UTF16BE],
|
| ** or [SQLITE_UTF16LE], indicating the most desirable form of the collation
|
| ** sequence function required. The fourth parameter is the name of the
|
| -** required collation sequence.
|
| +** required collation sequence.)^
|
| **
|
| ** The callback function should register the desired collation using
|
| ** [sqlite3_create_collation()], [sqlite3_create_collation16()], or
|
| ** [sqlite3_create_collation_v2()].
|
| -**
|
| -** Requirements:
|
| -** [H16702] [H16704] [H16706]
|
| */
|
| SQLITE_API int sqlite3_collation_needed(
|
| sqlite3*,
|
| @@ -3716,6 +3903,7 @@ SQLITE_API int sqlite3_collation_needed16(
|
| void(*)(void*,sqlite3*,int eTextRep,const void*)
|
| );
|
|
|
| +#ifdef SQLITE_HAS_CODEC
|
| /*
|
| ** Specify the key for an encrypted database. This routine should be
|
| ** called right after sqlite3_open().
|
| @@ -3742,7 +3930,26 @@ SQLITE_API int sqlite3_rekey(
|
| );
|
|
|
| /*
|
| -** CAPI3REF: Suspend Execution For A Short Time {H10530} <S40410>
|
| +** Specify the activation key for a SEE database. Unless
|
| +** activated, none of the SEE routines will work.
|
| +*/
|
| +SQLITE_API void sqlite3_activate_see(
|
| + const char *zPassPhrase /* Activation phrase */
|
| +);
|
| +#endif
|
| +
|
| +#ifdef SQLITE_ENABLE_CEROD
|
| +/*
|
| +** Specify the activation key for a CEROD database. Unless
|
| +** activated, none of the CEROD routines will work.
|
| +*/
|
| +SQLITE_API void sqlite3_activate_cerod(
|
| + const char *zPassPhrase /* Activation phrase */
|
| +);
|
| +#endif
|
| +
|
| +/*
|
| +** CAPI3REF: Suspend Execution For A Short Time
|
| **
|
| ** The sqlite3_sleep() function causes the current thread to suspend execution
|
| ** for at least a number of milliseconds specified in its parameter.
|
| @@ -3752,19 +3959,21 @@ SQLITE_API int sqlite3_rekey(
|
| ** the nearest second. The number of milliseconds of sleep actually
|
| ** requested from the operating system is returned.
|
| **
|
| -** SQLite implements this interface by calling the xSleep()
|
| -** method of the default [sqlite3_vfs] object.
|
| -**
|
| -** Requirements: [H10533] [H10536]
|
| +** ^SQLite implements this interface by calling the xSleep()
|
| +** method of the default [sqlite3_vfs] object. If the xSleep() method
|
| +** of the default VFS is not implemented correctly, or not implemented at
|
| +** all, then the behavior of sqlite3_sleep() may deviate from the description
|
| +** in the previous paragraphs.
|
| */
|
| SQLITE_API int sqlite3_sleep(int);
|
|
|
| /*
|
| -** CAPI3REF: Name Of The Folder Holding Temporary Files {H10310} <S20000>
|
| +** CAPI3REF: Name Of The Folder Holding Temporary Files
|
| **
|
| -** If this global variable is made to point to a string which is
|
| +** ^(If this global variable is made to point to a string which is
|
| ** the name of a folder (a.k.a. directory), then all temporary files
|
| -** created by SQLite will be placed in that directory. If this variable
|
| +** created by SQLite when using a built-in [sqlite3_vfs | VFS]
|
| +** will be placed in that directory.)^ ^If this variable
|
| ** is a NULL pointer, then SQLite performs a search for an appropriate
|
| ** temporary file directory.
|
| **
|
| @@ -3777,8 +3986,8 @@ SQLITE_API int sqlite3_sleep(int);
|
| ** routines have been called and that this variable remain unchanged
|
| ** thereafter.
|
| **
|
| -** The [temp_store_directory pragma] may modify this variable and cause
|
| -** it to point to memory obtained from [sqlite3_malloc]. Furthermore,
|
| +** ^The [temp_store_directory pragma] may modify this variable and cause
|
| +** it to point to memory obtained from [sqlite3_malloc]. ^Furthermore,
|
| ** the [temp_store_directory pragma] always assumes that any string
|
| ** that this variable points to is held in memory obtained from
|
| ** [sqlite3_malloc] and the pragma may attempt to free that memory
|
| @@ -3790,14 +3999,14 @@ SQLITE_API int sqlite3_sleep(int);
|
| SQLITE_API SQLITE_EXTERN char *sqlite3_temp_directory;
|
|
|
| /*
|
| -** CAPI3REF: Test For Auto-Commit Mode {H12930} <S60200>
|
| +** CAPI3REF: Test For Auto-Commit Mode
|
| ** KEYWORDS: {autocommit mode}
|
| **
|
| -** The sqlite3_get_autocommit() interface returns non-zero or
|
| +** ^The sqlite3_get_autocommit() interface returns non-zero or
|
| ** zero if the given database connection is or is not in autocommit mode,
|
| -** respectively. Autocommit mode is on by default.
|
| -** Autocommit mode is disabled by a [BEGIN] statement.
|
| -** Autocommit mode is re-enabled by a [COMMIT] or [ROLLBACK].
|
| +** respectively. ^Autocommit mode is on by default.
|
| +** ^Autocommit mode is disabled by a [BEGIN] statement.
|
| +** ^Autocommit mode is re-enabled by a [COMMIT] or [ROLLBACK].
|
| **
|
| ** If certain kinds of errors occur on a statement within a multi-statement
|
| ** transaction (errors including [SQLITE_FULL], [SQLITE_IOERR],
|
| @@ -3809,58 +4018,55 @@ SQLITE_API SQLITE_EXTERN char *sqlite3_temp_directory;
|
| ** If another thread changes the autocommit status of the database
|
| ** connection while this routine is running, then the return value
|
| ** is undefined.
|
| -**
|
| -** Requirements: [H12931] [H12932] [H12933] [H12934]
|
| */
|
| SQLITE_API int sqlite3_get_autocommit(sqlite3*);
|
|
|
| /*
|
| -** CAPI3REF: Find The Database Handle Of A Prepared Statement {H13120} <S60600>
|
| +** CAPI3REF: Find The Database Handle Of A Prepared Statement
|
| **
|
| -** The sqlite3_db_handle interface returns the [database connection] handle
|
| -** to which a [prepared statement] belongs. The [database connection]
|
| -** returned by sqlite3_db_handle is the same [database connection] that was the first argument
|
| +** ^The sqlite3_db_handle interface returns the [database connection] handle
|
| +** to which a [prepared statement] belongs. ^The [database connection]
|
| +** returned by sqlite3_db_handle is the same [database connection]
|
| +** that was the first argument
|
| ** to the [sqlite3_prepare_v2()] call (or its variants) that was used to
|
| ** create the statement in the first place.
|
| -**
|
| -** Requirements: [H13123]
|
| */
|
| SQLITE_API sqlite3 *sqlite3_db_handle(sqlite3_stmt*);
|
|
|
| /*
|
| -** CAPI3REF: Find the next prepared statement {H13140} <S60600>
|
| +** CAPI3REF: Find the next prepared statement
|
| **
|
| -** This interface returns a pointer to the next [prepared statement] after
|
| -** pStmt associated with the [database connection] pDb. If pStmt is NULL
|
| +** ^This interface returns a pointer to the next [prepared statement] after
|
| +** pStmt associated with the [database connection] pDb. ^If pStmt is NULL
|
| ** then this interface returns a pointer to the first prepared statement
|
| -** associated with the database connection pDb. If no prepared statement
|
| +** associated with the database connection pDb. ^If no prepared statement
|
| ** satisfies the conditions of this routine, it returns NULL.
|
| **
|
| ** The [database connection] pointer D in a call to
|
| ** [sqlite3_next_stmt(D,S)] must refer to an open database
|
| ** connection and in particular must not be a NULL pointer.
|
| -**
|
| -** Requirements: [H13143] [H13146] [H13149] [H13152]
|
| */
|
| SQLITE_API sqlite3_stmt *sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt);
|
|
|
| /*
|
| -** CAPI3REF: Commit And Rollback Notification Callbacks {H12950} <S60400>
|
| +** CAPI3REF: Commit And Rollback Notification Callbacks
|
| **
|
| -** The sqlite3_commit_hook() interface registers a callback
|
| +** ^The sqlite3_commit_hook() interface registers a callback
|
| ** function to be invoked whenever a transaction is [COMMIT | committed].
|
| -** Any callback set by a previous call to sqlite3_commit_hook()
|
| +** ^Any callback set by a previous call to sqlite3_commit_hook()
|
| ** for the same database connection is overridden.
|
| -** The sqlite3_rollback_hook() interface registers a callback
|
| +** ^The sqlite3_rollback_hook() interface registers a callback
|
| ** function to be invoked whenever a transaction is [ROLLBACK | rolled back].
|
| -** Any callback set by a previous call to sqlite3_commit_hook()
|
| +** ^Any callback set by a previous call to sqlite3_rollback_hook()
|
| ** for the same database connection is overridden.
|
| -** The pArg argument is passed through to the callback.
|
| -** If the callback on a commit hook function returns non-zero,
|
| +** ^The pArg argument is passed through to the callback.
|
| +** ^If the callback on a commit hook function returns non-zero,
|
| ** then the commit is converted into a rollback.
|
| **
|
| -** If another function was previously registered, its
|
| -** pArg value is returned. Otherwise NULL is returned.
|
| +** ^The sqlite3_commit_hook(D,C,P) and sqlite3_rollback_hook(D,C,P) functions
|
| +** return the P argument from the previous call of the same function
|
| +** on the same [database connection] D, or NULL for
|
| +** the first call for each function on D.
|
| **
|
| ** The callback implementation must not do anything that will modify
|
| ** the database connection that invoked the callback. Any actions
|
| @@ -3870,59 +4076,52 @@ SQLITE_API sqlite3_stmt *sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt);
|
| ** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their
|
| ** database connections for the meaning of "modify" in this paragraph.
|
| **
|
| -** Registering a NULL function disables the callback.
|
| +** ^Registering a NULL function disables the callback.
|
| **
|
| -** When the commit hook callback routine returns zero, the [COMMIT]
|
| -** operation is allowed to continue normally. If the commit hook
|
| +** ^When the commit hook callback routine returns zero, the [COMMIT]
|
| +** operation is allowed to continue normally. ^If the commit hook
|
| ** returns non-zero, then the [COMMIT] is converted into a [ROLLBACK].
|
| -** The rollback hook is invoked on a rollback that results from a commit
|
| +** ^The rollback hook is invoked on a rollback that results from a commit
|
| ** hook returning non-zero, just as it would be with any other rollback.
|
| **
|
| -** For the purposes of this API, a transaction is said to have been
|
| +** ^For the purposes of this API, a transaction is said to have been
|
| ** rolled back if an explicit "ROLLBACK" statement is executed, or
|
| ** an error or constraint causes an implicit rollback to occur.
|
| -** The rollback callback is not invoked if a transaction is
|
| +** ^The rollback callback is not invoked if a transaction is
|
| ** automatically rolled back because the database connection is closed.
|
| -** The rollback callback is not invoked if a transaction is
|
| -** rolled back because a commit callback returned non-zero.
|
| -** <todo> Check on this </todo>
|
| **
|
| ** See also the [sqlite3_update_hook()] interface.
|
| -**
|
| -** Requirements:
|
| -** [H12951] [H12952] [H12953] [H12954] [H12955]
|
| -** [H12961] [H12962] [H12963] [H12964]
|
| */
|
| SQLITE_API void *sqlite3_commit_hook(sqlite3*, int(*)(void*), void*);
|
| SQLITE_API void *sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*);
|
|
|
| /*
|
| -** CAPI3REF: Data Change Notification Callbacks {H12970} <S60400>
|
| +** CAPI3REF: Data Change Notification Callbacks
|
| **
|
| -** The sqlite3_update_hook() interface registers a callback function
|
| +** ^The sqlite3_update_hook() interface registers a callback function
|
| ** with the [database connection] identified by the first argument
|
| ** to be invoked whenever a row is updated, inserted or deleted.
|
| -** Any callback set by a previous call to this function
|
| +** ^Any callback set by a previous call to this function
|
| ** for the same database connection is overridden.
|
| **
|
| -** The second argument is a pointer to the function to invoke when a
|
| +** ^The second argument is a pointer to the function to invoke when a
|
| ** row is updated, inserted or deleted.
|
| -** The first argument to the callback is a copy of the third argument
|
| +** ^The first argument to the callback is a copy of the third argument
|
| ** to sqlite3_update_hook().
|
| -** The second callback argument is one of [SQLITE_INSERT], [SQLITE_DELETE],
|
| +** ^The second callback argument is one of [SQLITE_INSERT], [SQLITE_DELETE],
|
| ** or [SQLITE_UPDATE], depending on the operation that caused the callback
|
| ** to be invoked.
|
| -** The third and fourth arguments to the callback contain pointers to the
|
| +** ^The third and fourth arguments to the callback contain pointers to the
|
| ** database and table name containing the affected row.
|
| -** The final callback parameter is the [rowid] of the row.
|
| -** In the case of an update, this is the [rowid] after the update takes place.
|
| +** ^The final callback parameter is the [rowid] of the row.
|
| +** ^In the case of an update, this is the [rowid] after the update takes place.
|
| **
|
| -** The update hook is not invoked when internal system tables are
|
| -** modified (i.e. sqlite_master and sqlite_sequence).
|
| +** ^(The update hook is not invoked when internal system tables are
|
| +** modified (i.e. sqlite_master and sqlite_sequence).)^
|
| **
|
| -** In the current implementation, the update hook
|
| +** ^In the current implementation, the update hook
|
| ** is not invoked when duplication rows are deleted because of an
|
| -** [ON CONFLICT | ON CONFLICT REPLACE] clause. Nor is the update hook
|
| +** [ON CONFLICT | ON CONFLICT REPLACE] clause. ^Nor is the update hook
|
| ** invoked when rows are deleted using the [truncate optimization].
|
| ** The exceptions defined in this paragraph might change in a future
|
| ** release of SQLite.
|
| @@ -3934,14 +4133,13 @@ SQLITE_API void *sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*);
|
| ** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their
|
| ** database connections for the meaning of "modify" in this paragraph.
|
| **
|
| -** If another function was previously registered, its pArg value
|
| -** is returned. Otherwise NULL is returned.
|
| +** ^The sqlite3_update_hook(D,C,P) function
|
| +** returns the P argument from the previous call
|
| +** on the same [database connection] D, or NULL for
|
| +** the first call on D.
|
| **
|
| ** See also the [sqlite3_commit_hook()] and [sqlite3_rollback_hook()]
|
| ** interfaces.
|
| -**
|
| -** Requirements:
|
| -** [H12971] [H12973] [H12975] [H12977] [H12979] [H12981] [H12983] [H12986]
|
| */
|
| SQLITE_API void *sqlite3_update_hook(
|
| sqlite3*,
|
| @@ -3950,112 +4148,134 @@ SQLITE_API void *sqlite3_update_hook(
|
| );
|
|
|
| /*
|
| -** CAPI3REF: Enable Or Disable Shared Pager Cache {H10330} <S30900>
|
| +** CAPI3REF: Enable Or Disable Shared Pager Cache
|
| ** KEYWORDS: {shared cache}
|
| **
|
| -** This routine enables or disables the sharing of the database cache
|
| +** ^(This routine enables or disables the sharing of the database cache
|
| ** and schema data structures between [database connection | connections]
|
| ** to the same database. Sharing is enabled if the argument is true
|
| -** and disabled if the argument is false.
|
| +** and disabled if the argument is false.)^
|
| **
|
| -** Cache sharing is enabled and disabled for an entire process.
|
| +** ^Cache sharing is enabled and disabled for an entire process.
|
| ** This is a change as of SQLite version 3.5.0. In prior versions of SQLite,
|
| ** sharing was enabled or disabled for each thread separately.
|
| **
|
| -** The cache sharing mode set by this interface effects all subsequent
|
| +** ^(The cache sharing mode set by this interface effects all subsequent
|
| ** calls to [sqlite3_open()], [sqlite3_open_v2()], and [sqlite3_open16()].
|
| ** Existing database connections continue use the sharing mode
|
| -** that was in effect at the time they were opened.
|
| +** that was in effect at the time they were opened.)^
|
| **
|
| -** Virtual tables cannot be used with a shared cache. When shared
|
| -** cache is enabled, the [sqlite3_create_module()] API used to register
|
| -** virtual tables will always return an error.
|
| +** ^(This routine returns [SQLITE_OK] if shared cache was enabled or disabled
|
| +** successfully. An [error code] is returned otherwise.)^
|
| **
|
| -** This routine returns [SQLITE_OK] if shared cache was enabled or disabled
|
| -** successfully. An [error code] is returned otherwise.
|
| -**
|
| -** Shared cache is disabled by default. But this might change in
|
| +** ^Shared cache is disabled by default. But this might change in
|
| ** future releases of SQLite. Applications that care about shared
|
| ** cache setting should set it explicitly.
|
| **
|
| ** See Also: [SQLite Shared-Cache Mode]
|
| -**
|
| -** Requirements: [H10331] [H10336] [H10337] [H10339]
|
| */
|
| SQLITE_API int sqlite3_enable_shared_cache(int);
|
|
|
| /*
|
| -** CAPI3REF: Attempt To Free Heap Memory {H17340} <S30220>
|
| +** CAPI3REF: Attempt To Free Heap Memory
|
| **
|
| -** The sqlite3_release_memory() interface attempts to free N bytes
|
| +** ^The sqlite3_release_memory() interface attempts to free N bytes
|
| ** of heap memory by deallocating non-essential memory allocations
|
| -** held by the database library. {END} Memory used to cache database
|
| +** held by the database library. Memory used to cache database
|
| ** pages to improve performance is an example of non-essential memory.
|
| -** sqlite3_release_memory() returns the number of bytes actually freed,
|
| +** ^sqlite3_release_memory() returns the number of bytes actually freed,
|
| ** which might be more or less than the amount requested.
|
| -**
|
| -** Requirements: [H17341] [H17342]
|
| +** ^The sqlite3_release_memory() routine is a no-op returning zero
|
| +** if SQLite is not compiled with [SQLITE_ENABLE_MEMORY_MANAGEMENT].
|
| */
|
| SQLITE_API int sqlite3_release_memory(int);
|
|
|
| /*
|
| -** CAPI3REF: Impose A Limit On Heap Size {H17350} <S30220>
|
| +** CAPI3REF: Impose A Limit On Heap Size
|
| **
|
| -** The sqlite3_soft_heap_limit() interface places a "soft" limit
|
| -** on the amount of heap memory that may be allocated by SQLite.
|
| -** If an internal allocation is requested that would exceed the
|
| -** soft heap limit, [sqlite3_release_memory()] is invoked one or
|
| -** more times to free up some space before the allocation is performed.
|
| +** ^The sqlite3_soft_heap_limit64() interface sets and/or queries the
|
| +** soft limit on the amount of heap memory that may be allocated by SQLite.
|
| +** ^SQLite strives to keep heap memory utilization below the soft heap
|
| +** limit by reducing the number of pages held in the page cache
|
| +** as heap memory usages approaches the limit.
|
| +** ^The soft heap limit is "soft" because even though SQLite strives to stay
|
| +** below the limit, it will exceed the limit rather than generate
|
| +** an [SQLITE_NOMEM] error. In other words, the soft heap limit
|
| +** is advisory only.
|
| **
|
| -** The limit is called "soft", because if [sqlite3_release_memory()]
|
| -** cannot free sufficient memory to prevent the limit from being exceeded,
|
| -** the memory is allocated anyway and the current operation proceeds.
|
| +** ^The return value from sqlite3_soft_heap_limit64() is the size of
|
| +** the soft heap limit prior to the call. ^If the argument N is negative
|
| +** then no change is made to the soft heap limit. Hence, the current
|
| +** size of the soft heap limit can be determined by invoking
|
| +** sqlite3_soft_heap_limit64() with a negative argument.
|
| **
|
| -** A negative or zero value for N means that there is no soft heap limit and
|
| -** [sqlite3_release_memory()] will only be called when memory is exhausted.
|
| -** The default value for the soft heap limit is zero.
|
| +** ^If the argument N is zero then the soft heap limit is disabled.
|
| **
|
| -** SQLite makes a best effort to honor the soft heap limit.
|
| -** But if the soft heap limit cannot be honored, execution will
|
| -** continue without error or notification. This is why the limit is
|
| -** called a "soft" limit. It is advisory only.
|
| +** ^(The soft heap limit is not enforced in the current implementation
|
| +** if one or more of following conditions are true:
|
| **
|
| -** Prior to SQLite version 3.5.0, this routine only constrained the memory
|
| -** allocated by a single thread - the same thread in which this routine
|
| -** runs. Beginning with SQLite version 3.5.0, the soft heap limit is
|
| -** applied to all threads. The value specified for the soft heap limit
|
| -** is an upper bound on the total memory allocation for all threads. In
|
| -** version 3.5.0 there is no mechanism for limiting the heap usage for
|
| -** individual threads.
|
| +** <ul>
|
| +** <li> The soft heap limit is set to zero.
|
| +** <li> Memory accounting is disabled using a combination of the
|
| +** [sqlite3_config]([SQLITE_CONFIG_MEMSTATUS],...) start-time option and
|
| +** the [SQLITE_DEFAULT_MEMSTATUS] compile-time option.
|
| +** <li> An alternative page cache implementation is specifed using
|
| +** [sqlite3_config]([SQLITE_CONFIG_PCACHE],...).
|
| +** <li> The page cache allocates from its own memory pool supplied
|
| +** by [sqlite3_config]([SQLITE_CONFIG_PAGECACHE],...) rather than
|
| +** from the heap.
|
| +** </ul>)^
|
| +**
|
| +** Beginning with SQLite version 3.7.3, the soft heap limit is enforced
|
| +** regardless of whether or not the [SQLITE_ENABLE_MEMORY_MANAGEMENT]
|
| +** compile-time option is invoked. With [SQLITE_ENABLE_MEMORY_MANAGEMENT],
|
| +** the soft heap limit is enforced on every memory allocation. Without
|
| +** [SQLITE_ENABLE_MEMORY_MANAGEMENT], the soft heap limit is only enforced
|
| +** when memory is allocated by the page cache. Testing suggests that because
|
| +** the page cache is the predominate memory user in SQLite, most
|
| +** applications will achieve adequate soft heap limit enforcement without
|
| +** the use of [SQLITE_ENABLE_MEMORY_MANAGEMENT].
|
| +**
|
| +** The circumstances under which SQLite will enforce the soft heap limit may
|
| +** changes in future releases of SQLite.
|
| +*/
|
| +SQLITE_API sqlite3_int64 sqlite3_soft_heap_limit64(sqlite3_int64 N);
|
| +
|
| +/*
|
| +** CAPI3REF: Deprecated Soft Heap Limit Interface
|
| +** DEPRECATED
|
| **
|
| -** Requirements:
|
| -** [H16351] [H16352] [H16353] [H16354] [H16355] [H16358]
|
| +** This is a deprecated version of the [sqlite3_soft_heap_limit64()]
|
| +** interface. This routine is provided for historical compatibility
|
| +** only. All new applications should use the
|
| +** [sqlite3_soft_heap_limit64()] interface rather than this one.
|
| */
|
| -SQLITE_API void sqlite3_soft_heap_limit(int);
|
| +SQLITE_API SQLITE_DEPRECATED void sqlite3_soft_heap_limit(int N);
|
| +
|
|
|
| /*
|
| -** CAPI3REF: Extract Metadata About A Column Of A Table {H12850} <S60300>
|
| +** CAPI3REF: Extract Metadata About A Column Of A Table
|
| **
|
| -** This routine returns metadata about a specific column of a specific
|
| +** ^This routine returns metadata about a specific column of a specific
|
| ** database table accessible using the [database connection] handle
|
| ** passed as the first function argument.
|
| **
|
| -** The column is identified by the second, third and fourth parameters to
|
| -** this function. The second parameter is either the name of the database
|
| -** (i.e. "main", "temp" or an attached database) containing the specified
|
| -** table or NULL. If it is NULL, then all attached databases are searched
|
| +** ^The column is identified by the second, third and fourth parameters to
|
| +** this function. ^The second parameter is either the name of the database
|
| +** (i.e. "main", "temp", or an attached database) containing the specified
|
| +** table or NULL. ^If it is NULL, then all attached databases are searched
|
| ** for the table using the same algorithm used by the database engine to
|
| ** resolve unqualified table references.
|
| **
|
| -** The third and fourth parameters to this function are the table and column
|
| +** ^The third and fourth parameters to this function are the table and column
|
| ** name of the desired column, respectively. Neither of these parameters
|
| ** may be NULL.
|
| **
|
| -** Metadata is returned by writing to the memory locations passed as the 5th
|
| -** and subsequent parameters to this function. Any of these arguments may be
|
| +** ^Metadata is returned by writing to the memory locations passed as the 5th
|
| +** and subsequent parameters to this function. ^Any of these arguments may be
|
| ** NULL, in which case the corresponding element of metadata is omitted.
|
| **
|
| -** <blockquote>
|
| +** ^(<blockquote>
|
| ** <table border="1">
|
| ** <tr><th> Parameter <th> Output<br>Type <th> Description
|
| **
|
| @@ -4065,17 +4285,17 @@ SQLITE_API void sqlite3_soft_heap_limit(int);
|
| ** <tr><td> 8th <td> int <td> True if column is part of the PRIMARY KEY
|
| ** <tr><td> 9th <td> int <td> True if column is [AUTOINCREMENT]
|
| ** </table>
|
| -** </blockquote>
|
| +** </blockquote>)^
|
| **
|
| -** The memory pointed to by the character pointers returned for the
|
| +** ^The memory pointed to by the character pointers returned for the
|
| ** declaration type and collation sequence is valid only until the next
|
| ** call to any SQLite API function.
|
| **
|
| -** If the specified table is actually a view, an [error code] is returned.
|
| +** ^If the specified table is actually a view, an [error code] is returned.
|
| **
|
| -** If the specified column is "rowid", "oid" or "_rowid_" and an
|
| +** ^If the specified column is "rowid", "oid" or "_rowid_" and an
|
| ** [INTEGER PRIMARY KEY] column has been explicitly declared, then the output
|
| -** parameters are set for the explicitly declared column. If there is no
|
| +** parameters are set for the explicitly declared column. ^(If there is no
|
| ** explicitly declared [INTEGER PRIMARY KEY] column, then the output
|
| ** parameters are set as follows:
|
| **
|
| @@ -4085,14 +4305,14 @@ SQLITE_API void sqlite3_soft_heap_limit(int);
|
| ** not null: 0
|
| ** primary key: 1
|
| ** auto increment: 0
|
| -** </pre>
|
| +** </pre>)^
|
| **
|
| -** This function may load one or more schemas from database files. If an
|
| +** ^(This function may load one or more schemas from database files. If an
|
| ** error occurs during this process, or if the requested table or column
|
| ** cannot be found, an [error code] is returned and an error message left
|
| -** in the [database connection] (to be retrieved using sqlite3_errmsg()).
|
| +** in the [database connection] (to be retrieved using sqlite3_errmsg()).)^
|
| **
|
| -** This API is only available if the library was compiled with the
|
| +** ^This API is only available if the library was compiled with the
|
| ** [SQLITE_ENABLE_COLUMN_METADATA] C-preprocessor symbol defined.
|
| */
|
| SQLITE_API int sqlite3_table_column_metadata(
|
| @@ -4108,30 +4328,29 @@ SQLITE_API int sqlite3_table_column_metadata(
|
| );
|
|
|
| /*
|
| -** CAPI3REF: Load An Extension {H12600} <S20500>
|
| -**
|
| -** This interface loads an SQLite extension library from the named file.
|
| +** CAPI3REF: Load An Extension
|
| **
|
| -** {H12601} The sqlite3_load_extension() interface attempts to load an
|
| -** SQLite extension library contained in the file zFile.
|
| +** ^This interface loads an SQLite extension library from the named file.
|
| **
|
| -** {H12602} The entry point is zProc.
|
| +** ^The sqlite3_load_extension() interface attempts to load an
|
| +** SQLite extension library contained in the file zFile.
|
| **
|
| -** {H12603} zProc may be 0, in which case the name of the entry point
|
| -** defaults to "sqlite3_extension_init".
|
| +** ^The entry point is zProc.
|
| +** ^zProc may be 0, in which case the name of the entry point
|
| +** defaults to "sqlite3_extension_init".
|
| +** ^The sqlite3_load_extension() interface returns
|
| +** [SQLITE_OK] on success and [SQLITE_ERROR] if something goes wrong.
|
| +** ^If an error occurs and pzErrMsg is not 0, then the
|
| +** [sqlite3_load_extension()] interface shall attempt to
|
| +** fill *pzErrMsg with error message text stored in memory
|
| +** obtained from [sqlite3_malloc()]. The calling function
|
| +** should free this memory by calling [sqlite3_free()].
|
| **
|
| -** {H12604} The sqlite3_load_extension() interface shall return
|
| -** [SQLITE_OK] on success and [SQLITE_ERROR] if something goes wrong.
|
| +** ^Extension loading must be enabled using
|
| +** [sqlite3_enable_load_extension()] prior to calling this API,
|
| +** otherwise an error will be returned.
|
| **
|
| -** {H12605} If an error occurs and pzErrMsg is not 0, then the
|
| -** [sqlite3_load_extension()] interface shall attempt to
|
| -** fill *pzErrMsg with error message text stored in memory
|
| -** obtained from [sqlite3_malloc()]. {END} The calling function
|
| -** should free this memory by calling [sqlite3_free()].
|
| -**
|
| -** {H12606} Extension loading must be enabled using
|
| -** [sqlite3_enable_load_extension()] prior to calling this API,
|
| -** otherwise an error will be returned.
|
| +** See also the [load_extension() SQL function].
|
| */
|
| SQLITE_API int sqlite3_load_extension(
|
| sqlite3 *db, /* Load the extension into this database connection */
|
| @@ -4141,67 +4360,66 @@ SQLITE_API int sqlite3_load_extension(
|
| );
|
|
|
| /*
|
| -** CAPI3REF: Enable Or Disable Extension Loading {H12620} <S20500>
|
| +** CAPI3REF: Enable Or Disable Extension Loading
|
| **
|
| -** So as not to open security holes in older applications that are
|
| +** ^So as not to open security holes in older applications that are
|
| ** unprepared to deal with extension loading, and as a means of disabling
|
| ** extension loading while evaluating user-entered SQL, the following API
|
| ** is provided to turn the [sqlite3_load_extension()] mechanism on and off.
|
| **
|
| -** Extension loading is off by default. See ticket #1863.
|
| -**
|
| -** {H12621} Call the sqlite3_enable_load_extension() routine with onoff==1
|
| -** to turn extension loading on and call it with onoff==0 to turn
|
| -** it back off again.
|
| -**
|
| -** {H12622} Extension loading is off by default.
|
| +** ^Extension loading is off by default. See ticket #1863.
|
| +** ^Call the sqlite3_enable_load_extension() routine with onoff==1
|
| +** to turn extension loading on and call it with onoff==0 to turn
|
| +** it back off again.
|
| */
|
| SQLITE_API int sqlite3_enable_load_extension(sqlite3 *db, int onoff);
|
|
|
| /*
|
| -** CAPI3REF: Automatically Load An Extensions {H12640} <S20500>
|
| -**
|
| -** This API can be invoked at program startup in order to register
|
| -** one or more statically linked extensions that will be available
|
| -** to all new [database connections]. {END}
|
| -**
|
| -** This routine stores a pointer to the extension in an array that is
|
| -** obtained from [sqlite3_malloc()]. If you run a memory leak checker
|
| -** on your program and it reports a leak because of this array, invoke
|
| -** [sqlite3_reset_auto_extension()] prior to shutdown to free the memory.
|
| +** CAPI3REF: Automatically Load Statically Linked Extensions
|
| **
|
| -** {H12641} This function registers an extension entry point that is
|
| -** automatically invoked whenever a new [database connection]
|
| -** is opened using [sqlite3_open()], [sqlite3_open16()],
|
| -** or [sqlite3_open_v2()].
|
| +** ^This interface causes the xEntryPoint() function to be invoked for
|
| +** each new [database connection] that is created. The idea here is that
|
| +** xEntryPoint() is the entry point for a statically linked SQLite extension
|
| +** that is to be automatically loaded into all new database connections.
|
| **
|
| -** {H12642} Duplicate extensions are detected so calling this routine
|
| -** multiple times with the same extension is harmless.
|
| +** ^(Even though the function prototype shows that xEntryPoint() takes
|
| +** no arguments and returns void, SQLite invokes xEntryPoint() with three
|
| +** arguments and expects and integer result as if the signature of the
|
| +** entry point where as follows:
|
| **
|
| -** {H12643} This routine stores a pointer to the extension in an array
|
| -** that is obtained from [sqlite3_malloc()].
|
| -**
|
| -** {H12644} Automatic extensions apply across all threads.
|
| +** <blockquote><pre>
|
| +** int xEntryPoint(
|
| +** sqlite3 *db,
|
| +** const char **pzErrMsg,
|
| +** const struct sqlite3_api_routines *pThunk
|
| +** );
|
| +** </pre></blockquote>)^
|
| +**
|
| +** If the xEntryPoint routine encounters an error, it should make *pzErrMsg
|
| +** point to an appropriate error message (obtained from [sqlite3_mprintf()])
|
| +** and return an appropriate [error code]. ^SQLite ensures that *pzErrMsg
|
| +** is NULL before calling the xEntryPoint(). ^SQLite will invoke
|
| +** [sqlite3_free()] on *pzErrMsg after xEntryPoint() returns. ^If any
|
| +** xEntryPoint() returns an error, the [sqlite3_open()], [sqlite3_open16()],
|
| +** or [sqlite3_open_v2()] call that provoked the xEntryPoint() will fail.
|
| +**
|
| +** ^Calling sqlite3_auto_extension(X) with an entry point X that is already
|
| +** on the list of automatic extensions is a harmless no-op. ^No entry point
|
| +** will be called more than once for each database connection that is opened.
|
| +**
|
| +** See also: [sqlite3_reset_auto_extension()].
|
| */
|
| SQLITE_API int sqlite3_auto_extension(void (*xEntryPoint)(void));
|
|
|
| /*
|
| -** CAPI3REF: Reset Automatic Extension Loading {H12660} <S20500>
|
| +** CAPI3REF: Reset Automatic Extension Loading
|
| **
|
| -** This function disables all previously registered automatic
|
| -** extensions. {END} It undoes the effect of all prior
|
| -** [sqlite3_auto_extension()] calls.
|
| -**
|
| -** {H12661} This function disables all previously registered
|
| -** automatic extensions.
|
| -**
|
| -** {H12662} This function disables automatic extensions in all threads.
|
| +** ^This interface disables all automatic extensions previously
|
| +** registered using [sqlite3_auto_extension()].
|
| */
|
| SQLITE_API void sqlite3_reset_auto_extension(void);
|
|
|
| /*
|
| -****** EXPERIMENTAL - subject to change without notice **************
|
| -**
|
| ** The interface to the virtual-table mechanism is currently considered
|
| ** to be experimental. The interface might change in incompatible ways.
|
| ** If this is a problem for you, do not use the interface at this time.
|
| @@ -4219,18 +4437,17 @@ typedef struct sqlite3_vtab_cursor sqlite3_vtab_cursor;
|
| typedef struct sqlite3_module sqlite3_module;
|
|
|
| /*
|
| -** CAPI3REF: Virtual Table Object {H18000} <S20400>
|
| +** CAPI3REF: Virtual Table Object
|
| ** KEYWORDS: sqlite3_module {virtual table module}
|
| -** EXPERIMENTAL
|
| **
|
| ** This structure, sometimes called a a "virtual table module",
|
| ** defines the implementation of a [virtual tables].
|
| ** This structure consists mostly of methods for the module.
|
| **
|
| -** A virtual table module is created by filling in a persistent
|
| +** ^A virtual table module is created by filling in a persistent
|
| ** instance of this structure and passing a pointer to that instance
|
| ** to [sqlite3_create_module()] or [sqlite3_create_module_v2()].
|
| -** The registration remains valid until it is replaced by a different
|
| +** ^The registration remains valid until it is replaced by a different
|
| ** module or until the [database connection] closes. The content
|
| ** of this structure must not change while it is registered with
|
| ** any database connection.
|
| @@ -4266,52 +4483,54 @@ struct sqlite3_module {
|
| };
|
|
|
| /*
|
| -** CAPI3REF: Virtual Table Indexing Information {H18100} <S20400>
|
| +** CAPI3REF: Virtual Table Indexing Information
|
| ** KEYWORDS: sqlite3_index_info
|
| -** EXPERIMENTAL
|
| **
|
| -** The sqlite3_index_info structure and its substructures is used to
|
| +** The sqlite3_index_info structure and its substructures is used as part
|
| +** of the [virtual table] interface to
|
| ** pass information into and receive the reply from the [xBestIndex]
|
| ** method of a [virtual table module]. The fields under **Inputs** are the
|
| ** inputs to xBestIndex and are read-only. xBestIndex inserts its
|
| ** results into the **Outputs** fields.
|
| **
|
| -** The aConstraint[] array records WHERE clause constraints of the form:
|
| +** ^(The aConstraint[] array records WHERE clause constraints of the form:
|
| **
|
| -** <pre>column OP expr</pre>
|
| +** <blockquote>column OP expr</blockquote>
|
| **
|
| -** where OP is =, <, <=, >, or >=. The particular operator is
|
| -** stored in aConstraint[].op. The index of the column is stored in
|
| -** aConstraint[].iColumn. aConstraint[].usable is TRUE if the
|
| +** where OP is =, <, <=, >, or >=.)^ ^(The particular operator is
|
| +** stored in aConstraint[].op using one of the
|
| +** [SQLITE_INDEX_CONSTRAINT_EQ | SQLITE_INDEX_CONSTRAINT_ values].)^
|
| +** ^(The index of the column is stored in
|
| +** aConstraint[].iColumn.)^ ^(aConstraint[].usable is TRUE if the
|
| ** expr on the right-hand side can be evaluated (and thus the constraint
|
| -** is usable) and false if it cannot.
|
| +** is usable) and false if it cannot.)^
|
| **
|
| -** The optimizer automatically inverts terms of the form "expr OP column"
|
| +** ^The optimizer automatically inverts terms of the form "expr OP column"
|
| ** and makes other simplifications to the WHERE clause in an attempt to
|
| ** get as many WHERE clause terms into the form shown above as possible.
|
| -** The aConstraint[] array only reports WHERE clause terms in the correct
|
| -** form that refer to the particular virtual table being queried.
|
| +** ^The aConstraint[] array only reports WHERE clause terms that are
|
| +** relevant to the particular virtual table being queried.
|
| **
|
| -** Information about the ORDER BY clause is stored in aOrderBy[].
|
| -** Each term of aOrderBy records a column of the ORDER BY clause.
|
| +** ^Information about the ORDER BY clause is stored in aOrderBy[].
|
| +** ^Each term of aOrderBy records a column of the ORDER BY clause.
|
| **
|
| ** The [xBestIndex] method must fill aConstraintUsage[] with information
|
| -** about what parameters to pass to xFilter. If argvIndex>0 then
|
| +** about what parameters to pass to xFilter. ^If argvIndex>0 then
|
| ** the right-hand side of the corresponding aConstraint[] is evaluated
|
| -** and becomes the argvIndex-th entry in argv. If aConstraintUsage[].omit
|
| +** and becomes the argvIndex-th entry in argv. ^(If aConstraintUsage[].omit
|
| ** is true, then the constraint is assumed to be fully handled by the
|
| -** virtual table and is not checked again by SQLite.
|
| +** virtual table and is not checked again by SQLite.)^
|
| **
|
| -** The idxNum and idxPtr values are recorded and passed into the
|
| +** ^The idxNum and idxPtr values are recorded and passed into the
|
| ** [xFilter] method.
|
| -** [sqlite3_free()] is used to free idxPtr if and only iff
|
| +** ^[sqlite3_free()] is used to free idxPtr if and only if
|
| ** needToFreeIdxPtr is true.
|
| **
|
| -** The orderByConsumed means that output from [xFilter]/[xNext] will occur in
|
| +** ^The orderByConsumed means that output from [xFilter]/[xNext] will occur in
|
| ** the correct order to satisfy the ORDER BY clause so that no separate
|
| ** sorting step is required.
|
| **
|
| -** The estimatedCost value is an estimate of the cost of doing the
|
| +** ^The estimatedCost value is an estimate of the cost of doing the
|
| ** particular lookup. A full scan of a table with N entries should have
|
| ** a cost of N. A binary search of a table of N entries should have a
|
| ** cost of approximately log(N).
|
| @@ -4341,6 +4560,15 @@ struct sqlite3_index_info {
|
| int orderByConsumed; /* True if output is already ordered */
|
| double estimatedCost; /* Estimated cost of using this index */
|
| };
|
| +
|
| +/*
|
| +** CAPI3REF: Virtual Table Constraint Operator Codes
|
| +**
|
| +** These macros defined the allowed values for the
|
| +** [sqlite3_index_info].aConstraint[].op field. Each value represents
|
| +** an operator that is part of a constraint term in the wHERE clause of
|
| +** a query that uses a [virtual table].
|
| +*/
|
| #define SQLITE_INDEX_CONSTRAINT_EQ 2
|
| #define SQLITE_INDEX_CONSTRAINT_GT 4
|
| #define SQLITE_INDEX_CONSTRAINT_LE 8
|
| @@ -4349,43 +4577,35 @@ struct sqlite3_index_info {
|
| #define SQLITE_INDEX_CONSTRAINT_MATCH 64
|
|
|
| /*
|
| -** CAPI3REF: Register A Virtual Table Implementation {H18200} <S20400>
|
| -** EXPERIMENTAL
|
| +** CAPI3REF: Register A Virtual Table Implementation
|
| **
|
| -** This routine is used to register a new [virtual table module] name.
|
| -** Module names must be registered before
|
| -** creating a new [virtual table] using the module, or before using a
|
| +** ^These routines are used to register a new [virtual table module] name.
|
| +** ^Module names must be registered before
|
| +** creating a new [virtual table] using the module and before using a
|
| ** preexisting [virtual table] for the module.
|
| **
|
| -** The module name is registered on the [database connection] specified
|
| -** by the first parameter. The name of the module is given by the
|
| -** second parameter. The third parameter is a pointer to
|
| -** the implementation of the [virtual table module]. The fourth
|
| +** ^The module name is registered on the [database connection] specified
|
| +** by the first parameter. ^The name of the module is given by the
|
| +** second parameter. ^The third parameter is a pointer to
|
| +** the implementation of the [virtual table module]. ^The fourth
|
| ** parameter is an arbitrary client data pointer that is passed through
|
| ** into the [xCreate] and [xConnect] methods of the virtual table module
|
| ** when a new virtual table is be being created or reinitialized.
|
| **
|
| -** This interface has exactly the same effect as calling
|
| -** [sqlite3_create_module_v2()] with a NULL client data destructor.
|
| +** ^The sqlite3_create_module_v2() interface has a fifth parameter which
|
| +** is a pointer to a destructor for the pClientData. ^SQLite will
|
| +** invoke the destructor function (if it is not NULL) when SQLite
|
| +** no longer needs the pClientData pointer. ^The sqlite3_create_module()
|
| +** interface is equivalent to sqlite3_create_module_v2() with a NULL
|
| +** destructor.
|
| */
|
| -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_create_module(
|
| +SQLITE_API int sqlite3_create_module(
|
| sqlite3 *db, /* SQLite connection to register module with */
|
| const char *zName, /* Name of the module */
|
| const sqlite3_module *p, /* Methods for the module */
|
| void *pClientData /* Client data for xCreate/xConnect */
|
| );
|
| -
|
| -/*
|
| -** CAPI3REF: Register A Virtual Table Implementation {H18210} <S20400>
|
| -** EXPERIMENTAL
|
| -**
|
| -** This routine is identical to the [sqlite3_create_module()] method,
|
| -** except that it has an extra parameter to specify
|
| -** a destructor function for the client data pointer. SQLite will
|
| -** invoke the destructor function (if it is not NULL) when SQLite
|
| -** no longer needs the pClientData pointer.
|
| -*/
|
| -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_create_module_v2(
|
| +SQLITE_API int sqlite3_create_module_v2(
|
| sqlite3 *db, /* SQLite connection to register module with */
|
| const char *zName, /* Name of the module */
|
| const sqlite3_module *p, /* Methods for the module */
|
| @@ -4394,21 +4614,20 @@ SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_create_module_v2(
|
| );
|
|
|
| /*
|
| -** CAPI3REF: Virtual Table Instance Object {H18010} <S20400>
|
| +** CAPI3REF: Virtual Table Instance Object
|
| ** KEYWORDS: sqlite3_vtab
|
| -** EXPERIMENTAL
|
| **
|
| ** Every [virtual table module] implementation uses a subclass
|
| -** of the following structure to describe a particular instance
|
| +** of this object to describe a particular instance
|
| ** of the [virtual table]. Each subclass will
|
| ** be tailored to the specific needs of the module implementation.
|
| ** The purpose of this superclass is to define certain fields that are
|
| ** common to all module implementations.
|
| **
|
| -** Virtual tables methods can set an error message by assigning a
|
| +** ^Virtual tables methods can set an error message by assigning a
|
| ** string obtained from [sqlite3_mprintf()] to zErrMsg. The method should
|
| ** take care that any prior string is freed by a call to [sqlite3_free()]
|
| -** prior to assigning a new string to zErrMsg. After the error message
|
| +** prior to assigning a new string to zErrMsg. ^After the error message
|
| ** is delivered up to the client application, the string will be automatically
|
| ** freed by sqlite3_free() and the zErrMsg field will be zeroed.
|
| */
|
| @@ -4420,16 +4639,15 @@ struct sqlite3_vtab {
|
| };
|
|
|
| /*
|
| -** CAPI3REF: Virtual Table Cursor Object {H18020} <S20400>
|
| +** CAPI3REF: Virtual Table Cursor Object
|
| ** KEYWORDS: sqlite3_vtab_cursor {virtual table cursor}
|
| -** EXPERIMENTAL
|
| **
|
| ** Every [virtual table module] implementation uses a subclass of the
|
| ** following structure to describe cursors that point into the
|
| ** [virtual table] and are used
|
| ** to loop through the virtual table. Cursors are created using the
|
| ** [sqlite3_module.xOpen | xOpen] method of the module and are destroyed
|
| -** by the [sqlite3_module.xClose | xClose] method. Cussors are used
|
| +** by the [sqlite3_module.xClose | xClose] method. Cursors are used
|
| ** by the [xFilter], [xNext], [xEof], [xColumn], and [xRowid] methods
|
| ** of the module. Each module implementation will define
|
| ** the content of a cursor structure to suit its own needs.
|
| @@ -4443,34 +4661,47 @@ struct sqlite3_vtab_cursor {
|
| };
|
|
|
| /*
|
| -** CAPI3REF: Declare The Schema Of A Virtual Table {H18280} <S20400>
|
| -** EXPERIMENTAL
|
| +** CAPI3REF: Declare The Schema Of A Virtual Table
|
| **
|
| -** The [xCreate] and [xConnect] methods of a
|
| +** ^The [xCreate] and [xConnect] methods of a
|
| ** [virtual table module] call this interface
|
| ** to declare the format (the names and datatypes of the columns) of
|
| ** the virtual tables they implement.
|
| */
|
| -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_declare_vtab(sqlite3*, const char *zSQL);
|
| +SQLITE_API int sqlite3_declare_vtab(sqlite3*, const char *zSQL);
|
|
|
| /*
|
| -** CAPI3REF: Overload A Function For A Virtual Table {H18300} <S20400>
|
| -** EXPERIMENTAL
|
| +** CAPI3REF: Overload A Function For A Virtual Table
|
| **
|
| -** Virtual tables can provide alternative implementations of functions
|
| +** ^(Virtual tables can provide alternative implementations of functions
|
| ** using the [xFindFunction] method of the [virtual table module].
|
| ** But global versions of those functions
|
| -** must exist in order to be overloaded.
|
| +** must exist in order to be overloaded.)^
|
| **
|
| -** This API makes sure a global version of a function with a particular
|
| +** ^(This API makes sure a global version of a function with a particular
|
| ** name and number of parameters exists. If no such function exists
|
| -** before this API is called, a new function is created. The implementation
|
| +** before this API is called, a new function is created.)^ ^The implementation
|
| ** of the new function always causes an exception to be thrown. So
|
| ** the new function is not good for anything by itself. Its only
|
| ** purpose is to be a placeholder function that can be overloaded
|
| ** by a [virtual table].
|
| */
|
| -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_overload_function(sqlite3*, const char *zFuncName, int nArg);
|
| +SQLITE_API int sqlite3_overload_function(sqlite3*, const char *zFuncName, int nArg);
|
| +
|
| +/* Begin preload-cache.patch for Chromium */
|
| +/*
|
| +** Preload the databases into the pager cache, up to the maximum size of the
|
| +** pager cache.
|
| +**
|
| +** For a database to be loaded successfully, the pager must be active. That is,
|
| +** there must be an open statement on that database. See sqlite3pager_loadall
|
| +**
|
| +** There might be many databases attached to the given connection. We iterate
|
| +** them all and try to load them. If none are loadable successfully, we return
|
| +** an error. Otherwise, we return OK.
|
| +*/
|
| +int sqlite3Preload(sqlite3 *db);
|
| +/* End preload-cache.patch for Chromium */
|
|
|
| /*
|
| ** The interface to the virtual-table mechanism defined above (back up
|
| @@ -4480,79 +4711,77 @@ SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_overload_function(sqlite3*, const cha
|
| **
|
| ** When the virtual-table mechanism stabilizes, we will declare the
|
| ** interface fixed, support it indefinitely, and remove this comment.
|
| -**
|
| -****** EXPERIMENTAL - subject to change without notice **************
|
| */
|
|
|
| /*
|
| -** CAPI3REF: A Handle To An Open BLOB {H17800} <S30230>
|
| +** CAPI3REF: A Handle To An Open BLOB
|
| ** KEYWORDS: {BLOB handle} {BLOB handles}
|
| **
|
| ** An instance of this object represents an open BLOB on which
|
| ** [sqlite3_blob_open | incremental BLOB I/O] can be performed.
|
| -** Objects of this type are created by [sqlite3_blob_open()]
|
| +** ^Objects of this type are created by [sqlite3_blob_open()]
|
| ** and destroyed by [sqlite3_blob_close()].
|
| -** The [sqlite3_blob_read()] and [sqlite3_blob_write()] interfaces
|
| +** ^The [sqlite3_blob_read()] and [sqlite3_blob_write()] interfaces
|
| ** can be used to read or write small subsections of the BLOB.
|
| -** The [sqlite3_blob_bytes()] interface returns the size of the BLOB in bytes.
|
| +** ^The [sqlite3_blob_bytes()] interface returns the size of the BLOB in bytes.
|
| */
|
| typedef struct sqlite3_blob sqlite3_blob;
|
|
|
| /*
|
| -** CAPI3REF: Open A BLOB For Incremental I/O {H17810} <S30230>
|
| +** CAPI3REF: Open A BLOB For Incremental I/O
|
| **
|
| -** This interfaces opens a [BLOB handle | handle] to the BLOB located
|
| +** ^(This interfaces opens a [BLOB handle | handle] to the BLOB located
|
| ** in row iRow, column zColumn, table zTable in database zDb;
|
| ** in other words, the same BLOB that would be selected by:
|
| **
|
| ** <pre>
|
| ** SELECT zColumn FROM zDb.zTable WHERE [rowid] = iRow;
|
| -** </pre> {END}
|
| +** </pre>)^
|
| **
|
| -** If the flags parameter is non-zero, then the BLOB is opened for read
|
| -** and write access. If it is zero, the BLOB is opened for read access.
|
| +** ^If the flags parameter is non-zero, then the BLOB is opened for read
|
| +** and write access. ^If it is zero, the BLOB is opened for read access.
|
| +** ^It is not possible to open a column that is part of an index or primary
|
| +** key for writing. ^If [foreign key constraints] are enabled, it is
|
| +** not possible to open a column that is part of a [child key] for writing.
|
| **
|
| -** Note that the database name is not the filename that contains
|
| +** ^Note that the database name is not the filename that contains
|
| ** the database but rather the symbolic name of the database that
|
| -** is assigned when the database is connected using [ATTACH].
|
| -** For the main database file, the database name is "main".
|
| -** For TEMP tables, the database name is "temp".
|
| +** appears after the AS keyword when the database is connected using [ATTACH].
|
| +** ^For the main database file, the database name is "main".
|
| +** ^For TEMP tables, the database name is "temp".
|
| **
|
| -** On success, [SQLITE_OK] is returned and the new [BLOB handle] is written
|
| +** ^(On success, [SQLITE_OK] is returned and the new [BLOB handle] is written
|
| ** to *ppBlob. Otherwise an [error code] is returned and *ppBlob is set
|
| -** to be a null pointer.
|
| -** This function sets the [database connection] error code and message
|
| +** to be a null pointer.)^
|
| +** ^This function sets the [database connection] error code and message
|
| ** accessible via [sqlite3_errcode()] and [sqlite3_errmsg()] and related
|
| -** functions. Note that the *ppBlob variable is always initialized in a
|
| +** functions. ^Note that the *ppBlob variable is always initialized in a
|
| ** way that makes it safe to invoke [sqlite3_blob_close()] on *ppBlob
|
| ** regardless of the success or failure of this routine.
|
| **
|
| -** If the row that a BLOB handle points to is modified by an
|
| +** ^(If the row that a BLOB handle points to is modified by an
|
| ** [UPDATE], [DELETE], or by [ON CONFLICT] side-effects
|
| ** then the BLOB handle is marked as "expired".
|
| ** This is true if any column of the row is changed, even a column
|
| -** other than the one the BLOB handle is open on.
|
| -** Calls to [sqlite3_blob_read()] and [sqlite3_blob_write()] for
|
| +** other than the one the BLOB handle is open on.)^
|
| +** ^Calls to [sqlite3_blob_read()] and [sqlite3_blob_write()] for
|
| ** a expired BLOB handle fail with an return code of [SQLITE_ABORT].
|
| -** Changes written into a BLOB prior to the BLOB expiring are not
|
| -** rollback by the expiration of the BLOB. Such changes will eventually
|
| -** commit if the transaction continues to completion.
|
| +** ^(Changes written into a BLOB prior to the BLOB expiring are not
|
| +** rolled back by the expiration of the BLOB. Such changes will eventually
|
| +** commit if the transaction continues to completion.)^
|
| **
|
| -** Use the [sqlite3_blob_bytes()] interface to determine the size of
|
| -** the opened blob. The size of a blob may not be changed by this
|
| +** ^Use the [sqlite3_blob_bytes()] interface to determine the size of
|
| +** the opened blob. ^The size of a blob may not be changed by this
|
| ** interface. Use the [UPDATE] SQL command to change the size of a
|
| ** blob.
|
| **
|
| -** The [sqlite3_bind_zeroblob()] and [sqlite3_result_zeroblob()] interfaces
|
| +** ^The [sqlite3_bind_zeroblob()] and [sqlite3_result_zeroblob()] interfaces
|
| ** and the built-in [zeroblob] SQL function can be used, if desired,
|
| ** to create an empty, zero-filled blob in which to read or write using
|
| ** this interface.
|
| **
|
| ** To avoid a resource leak, every open [BLOB handle] should eventually
|
| ** be released by a call to [sqlite3_blob_close()].
|
| -**
|
| -** Requirements:
|
| -** [H17813] [H17814] [H17816] [H17819] [H17821] [H17824]
|
| */
|
| SQLITE_API int sqlite3_blob_open(
|
| sqlite3*,
|
| @@ -4565,37 +4794,34 @@ SQLITE_API int sqlite3_blob_open(
|
| );
|
|
|
| /*
|
| -** CAPI3REF: Close A BLOB Handle {H17830} <S30230>
|
| +** CAPI3REF: Close A BLOB Handle
|
| **
|
| -** Closes an open [BLOB handle].
|
| +** ^Closes an open [BLOB handle].
|
| **
|
| -** Closing a BLOB shall cause the current transaction to commit
|
| +** ^Closing a BLOB shall cause the current transaction to commit
|
| ** if there are no other BLOBs, no pending prepared statements, and the
|
| ** database connection is in [autocommit mode].
|
| -** If any writes were made to the BLOB, they might be held in cache
|
| +** ^If any writes were made to the BLOB, they might be held in cache
|
| ** until the close operation if they will fit.
|
| **
|
| -** Closing the BLOB often forces the changes
|
| +** ^(Closing the BLOB often forces the changes
|
| ** out to disk and so if any I/O errors occur, they will likely occur
|
| ** at the time when the BLOB is closed. Any errors that occur during
|
| -** closing are reported as a non-zero return value.
|
| -**
|
| -** The BLOB is closed unconditionally. Even if this routine returns
|
| -** an error code, the BLOB is still closed.
|
| +** closing are reported as a non-zero return value.)^
|
| **
|
| -** Calling this routine with a null pointer (which as would be returned
|
| -** by failed call to [sqlite3_blob_open()]) is a harmless no-op.
|
| +** ^(The BLOB is closed unconditionally. Even if this routine returns
|
| +** an error code, the BLOB is still closed.)^
|
| **
|
| -** Requirements:
|
| -** [H17833] [H17836] [H17839]
|
| +** ^Calling this routine with a null pointer (such as would be returned
|
| +** by a failed call to [sqlite3_blob_open()]) is a harmless no-op.
|
| */
|
| SQLITE_API int sqlite3_blob_close(sqlite3_blob *);
|
|
|
| /*
|
| -** CAPI3REF: Return The Size Of An Open BLOB {H17840} <S30230>
|
| +** CAPI3REF: Return The Size Of An Open BLOB
|
| **
|
| -** Returns the size in bytes of the BLOB accessible via the
|
| -** successfully opened [BLOB handle] in its only argument. The
|
| +** ^Returns the size in bytes of the BLOB accessible via the
|
| +** successfully opened [BLOB handle] in its only argument. ^The
|
| ** incremental blob I/O routines can only read or overwriting existing
|
| ** blob content; they cannot change the size of a blob.
|
| **
|
| @@ -4603,30 +4829,27 @@ SQLITE_API int sqlite3_blob_close(sqlite3_blob *);
|
| ** by a prior successful call to [sqlite3_blob_open()] and which has not
|
| ** been closed by [sqlite3_blob_close()]. Passing any other pointer in
|
| ** to this routine results in undefined and probably undesirable behavior.
|
| -**
|
| -** Requirements:
|
| -** [H17843]
|
| */
|
| SQLITE_API int sqlite3_blob_bytes(sqlite3_blob *);
|
|
|
| /*
|
| -** CAPI3REF: Read Data From A BLOB Incrementally {H17850} <S30230>
|
| +** CAPI3REF: Read Data From A BLOB Incrementally
|
| **
|
| -** This function is used to read data from an open [BLOB handle] into a
|
| +** ^(This function is used to read data from an open [BLOB handle] into a
|
| ** caller-supplied buffer. N bytes of data are copied into buffer Z
|
| -** from the open BLOB, starting at offset iOffset.
|
| +** from the open BLOB, starting at offset iOffset.)^
|
| **
|
| -** If offset iOffset is less than N bytes from the end of the BLOB,
|
| -** [SQLITE_ERROR] is returned and no data is read. If N or iOffset is
|
| +** ^If offset iOffset is less than N bytes from the end of the BLOB,
|
| +** [SQLITE_ERROR] is returned and no data is read. ^If N or iOffset is
|
| ** less than zero, [SQLITE_ERROR] is returned and no data is read.
|
| -** The size of the blob (and hence the maximum value of N+iOffset)
|
| +** ^The size of the blob (and hence the maximum value of N+iOffset)
|
| ** can be determined using the [sqlite3_blob_bytes()] interface.
|
| **
|
| -** An attempt to read from an expired [BLOB handle] fails with an
|
| +** ^An attempt to read from an expired [BLOB handle] fails with an
|
| ** error code of [SQLITE_ABORT].
|
| **
|
| -** On success, SQLITE_OK is returned.
|
| -** Otherwise, an [error code] or an [extended error code] is returned.
|
| +** ^(On success, sqlite3_blob_read() returns SQLITE_OK.
|
| +** Otherwise, an [error code] or an [extended error code] is returned.)^
|
| **
|
| ** This routine only works on a [BLOB handle] which has been created
|
| ** by a prior successful call to [sqlite3_blob_open()] and which has not
|
| @@ -4634,40 +4857,37 @@ SQLITE_API int sqlite3_blob_bytes(sqlite3_blob *);
|
| ** to this routine results in undefined and probably undesirable behavior.
|
| **
|
| ** See also: [sqlite3_blob_write()].
|
| -**
|
| -** Requirements:
|
| -** [H17853] [H17856] [H17859] [H17862] [H17863] [H17865] [H17868]
|
| */
|
| SQLITE_API int sqlite3_blob_read(sqlite3_blob *, void *Z, int N, int iOffset);
|
|
|
| /*
|
| -** CAPI3REF: Write Data Into A BLOB Incrementally {H17870} <S30230>
|
| +** CAPI3REF: Write Data Into A BLOB Incrementally
|
| **
|
| -** This function is used to write data into an open [BLOB handle] from a
|
| -** caller-supplied buffer. N bytes of data are copied from the buffer Z
|
| +** ^This function is used to write data into an open [BLOB handle] from a
|
| +** caller-supplied buffer. ^N bytes of data are copied from the buffer Z
|
| ** into the open BLOB, starting at offset iOffset.
|
| **
|
| -** If the [BLOB handle] passed as the first argument was not opened for
|
| +** ^If the [BLOB handle] passed as the first argument was not opened for
|
| ** writing (the flags parameter to [sqlite3_blob_open()] was zero),
|
| ** this function returns [SQLITE_READONLY].
|
| **
|
| -** This function may only modify the contents of the BLOB; it is
|
| +** ^This function may only modify the contents of the BLOB; it is
|
| ** not possible to increase the size of a BLOB using this API.
|
| -** If offset iOffset is less than N bytes from the end of the BLOB,
|
| -** [SQLITE_ERROR] is returned and no data is written. If N is
|
| +** ^If offset iOffset is less than N bytes from the end of the BLOB,
|
| +** [SQLITE_ERROR] is returned and no data is written. ^If N is
|
| ** less than zero [SQLITE_ERROR] is returned and no data is written.
|
| ** The size of the BLOB (and hence the maximum value of N+iOffset)
|
| ** can be determined using the [sqlite3_blob_bytes()] interface.
|
| **
|
| -** An attempt to write to an expired [BLOB handle] fails with an
|
| -** error code of [SQLITE_ABORT]. Writes to the BLOB that occurred
|
| +** ^An attempt to write to an expired [BLOB handle] fails with an
|
| +** error code of [SQLITE_ABORT]. ^Writes to the BLOB that occurred
|
| ** before the [BLOB handle] expired are not rolled back by the
|
| ** expiration of the handle, though of course those changes might
|
| ** have been overwritten by the statement that expired the BLOB handle
|
| ** or by other independent statements.
|
| **
|
| -** On success, SQLITE_OK is returned.
|
| -** Otherwise, an [error code] or an [extended error code] is returned.
|
| +** ^(On success, sqlite3_blob_write() returns SQLITE_OK.
|
| +** Otherwise, an [error code] or an [extended error code] is returned.)^
|
| **
|
| ** This routine only works on a [BLOB handle] which has been created
|
| ** by a prior successful call to [sqlite3_blob_open()] and which has not
|
| @@ -4675,30 +4895,11 @@ SQLITE_API int sqlite3_blob_read(sqlite3_blob *, void *Z, int N, int iOffset);
|
| ** to this routine results in undefined and probably undesirable behavior.
|
| **
|
| ** See also: [sqlite3_blob_read()].
|
| -**
|
| -** Requirements:
|
| -** [H17873] [H17874] [H17875] [H17876] [H17877] [H17879] [H17882] [H17885]
|
| -** [H17888]
|
| */
|
| SQLITE_API int sqlite3_blob_write(sqlite3_blob *, const void *z, int n, int iOffset);
|
|
|
| -/* Begin preload-cache.patch for Chromium */
|
| -/*
|
| -** Preload the databases into the pager cache, up to the maximum size of the
|
| -** pager cache.
|
| -**
|
| -** For a database to be loaded successfully, the pager must be active. That is,
|
| -** there must be an open statement on that database. See sqlite3pager_loadall
|
| -**
|
| -** There might be many databases attached to the given connection. We iterate
|
| -** them all and try to load them. If none are loadable successfully, we return
|
| -** an error. Otherwise, we return OK.
|
| -*/
|
| -int sqlite3Preload(sqlite3 *db);
|
| -/* End preload-cache.patch for Chromium */
|
| -
|
| /*
|
| -** CAPI3REF: Virtual File System Objects {H11200} <S20100>
|
| +** CAPI3REF: Virtual File System Objects
|
| **
|
| ** A virtual filesystem (VFS) is an [sqlite3_vfs] object
|
| ** that SQLite uses to interact
|
| @@ -4707,34 +4908,31 @@ int sqlite3Preload(sqlite3 *db);
|
| ** New VFSes can be registered and existing VFSes can be unregistered.
|
| ** The following interfaces are provided.
|
| **
|
| -** The sqlite3_vfs_find() interface returns a pointer to a VFS given its name.
|
| -** Names are case sensitive.
|
| -** Names are zero-terminated UTF-8 strings.
|
| -** If there is no match, a NULL pointer is returned.
|
| -** If zVfsName is NULL then the default VFS is returned.
|
| +** ^The sqlite3_vfs_find() interface returns a pointer to a VFS given its name.
|
| +** ^Names are case sensitive.
|
| +** ^Names are zero-terminated UTF-8 strings.
|
| +** ^If there is no match, a NULL pointer is returned.
|
| +** ^If zVfsName is NULL then the default VFS is returned.
|
| **
|
| -** New VFSes are registered with sqlite3_vfs_register().
|
| -** Each new VFS becomes the default VFS if the makeDflt flag is set.
|
| -** The same VFS can be registered multiple times without injury.
|
| -** To make an existing VFS into the default VFS, register it again
|
| +** ^New VFSes are registered with sqlite3_vfs_register().
|
| +** ^Each new VFS becomes the default VFS if the makeDflt flag is set.
|
| +** ^The same VFS can be registered multiple times without injury.
|
| +** ^To make an existing VFS into the default VFS, register it again
|
| ** with the makeDflt flag set. If two different VFSes with the
|
| ** same name are registered, the behavior is undefined. If a
|
| ** VFS is registered with a name that is NULL or an empty string,
|
| ** then the behavior is undefined.
|
| **
|
| -** Unregister a VFS with the sqlite3_vfs_unregister() interface.
|
| -** If the default VFS is unregistered, another VFS is chosen as
|
| -** the default. The choice for the new VFS is arbitrary.
|
| -**
|
| -** Requirements:
|
| -** [H11203] [H11206] [H11209] [H11212] [H11215] [H11218]
|
| +** ^Unregister a VFS with the sqlite3_vfs_unregister() interface.
|
| +** ^(If the default VFS is unregistered, another VFS is chosen as
|
| +** the default. The choice for the new VFS is arbitrary.)^
|
| */
|
| SQLITE_API sqlite3_vfs *sqlite3_vfs_find(const char *zVfsName);
|
| SQLITE_API int sqlite3_vfs_register(sqlite3_vfs*, int makeDflt);
|
| SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*);
|
|
|
| /*
|
| -** CAPI3REF: Mutexes {H17000} <S20000>
|
| +** CAPI3REF: Mutexes
|
| **
|
| ** The SQLite core uses these routines for thread
|
| ** synchronization. Though they are intended for internal
|
| @@ -4743,7 +4941,7 @@ SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*);
|
| **
|
| ** The SQLite source code contains multiple implementations
|
| ** of these mutex routines. An appropriate implementation
|
| -** is selected automatically at compile-time. The following
|
| +** is selected automatically at compile-time. ^(The following
|
| ** implementations are available in the SQLite core:
|
| **
|
| ** <ul>
|
| @@ -4751,26 +4949,26 @@ SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*);
|
| ** <li> SQLITE_MUTEX_PTHREAD
|
| ** <li> SQLITE_MUTEX_W32
|
| ** <li> SQLITE_MUTEX_NOOP
|
| -** </ul>
|
| +** </ul>)^
|
| **
|
| -** The SQLITE_MUTEX_NOOP implementation is a set of routines
|
| +** ^The SQLITE_MUTEX_NOOP implementation is a set of routines
|
| ** that does no real locking and is appropriate for use in
|
| -** a single-threaded application. The SQLITE_MUTEX_OS2,
|
| +** a single-threaded application. ^The SQLITE_MUTEX_OS2,
|
| ** SQLITE_MUTEX_PTHREAD, and SQLITE_MUTEX_W32 implementations
|
| ** are appropriate for use on OS/2, Unix, and Windows.
|
| **
|
| -** If SQLite is compiled with the SQLITE_MUTEX_APPDEF preprocessor
|
| +** ^(If SQLite is compiled with the SQLITE_MUTEX_APPDEF preprocessor
|
| ** macro defined (with "-DSQLITE_MUTEX_APPDEF=1"), then no mutex
|
| ** implementation is included with the library. In this case the
|
| ** application must supply a custom mutex implementation using the
|
| ** [SQLITE_CONFIG_MUTEX] option of the sqlite3_config() function
|
| ** before calling sqlite3_initialize() or any other public sqlite3_
|
| -** function that calls sqlite3_initialize().
|
| +** function that calls sqlite3_initialize().)^
|
| **
|
| -** {H17011} The sqlite3_mutex_alloc() routine allocates a new
|
| -** mutex and returns a pointer to it. {H17012} If it returns NULL
|
| -** that means that a mutex could not be allocated. {H17013} SQLite
|
| -** will unwind its stack and return an error. {H17014} The argument
|
| +** ^The sqlite3_mutex_alloc() routine allocates a new
|
| +** mutex and returns a pointer to it. ^If it returns NULL
|
| +** that means that a mutex could not be allocated. ^SQLite
|
| +** will unwind its stack and return an error. ^(The argument
|
| ** to sqlite3_mutex_alloc() is one of these integer constants:
|
| **
|
| ** <ul>
|
| @@ -4782,64 +4980,66 @@ SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*);
|
| ** <li> SQLITE_MUTEX_STATIC_PRNG
|
| ** <li> SQLITE_MUTEX_STATIC_LRU
|
| ** <li> SQLITE_MUTEX_STATIC_LRU2
|
| -** </ul>
|
| +** </ul>)^
|
| **
|
| -** {H17015} The first two constants cause sqlite3_mutex_alloc() to create
|
| -** a new mutex. The new mutex is recursive when SQLITE_MUTEX_RECURSIVE
|
| -** is used but not necessarily so when SQLITE_MUTEX_FAST is used. {END}
|
| +** ^The first two constants (SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE)
|
| +** cause sqlite3_mutex_alloc() to create
|
| +** a new mutex. ^The new mutex is recursive when SQLITE_MUTEX_RECURSIVE
|
| +** is used but not necessarily so when SQLITE_MUTEX_FAST is used.
|
| ** The mutex implementation does not need to make a distinction
|
| ** between SQLITE_MUTEX_RECURSIVE and SQLITE_MUTEX_FAST if it does
|
| -** not want to. {H17016} But SQLite will only request a recursive mutex in
|
| -** cases where it really needs one. {END} If a faster non-recursive mutex
|
| +** not want to. ^SQLite will only request a recursive mutex in
|
| +** cases where it really needs one. ^If a faster non-recursive mutex
|
| ** implementation is available on the host platform, the mutex subsystem
|
| ** might return such a mutex in response to SQLITE_MUTEX_FAST.
|
| **
|
| -** {H17017} The other allowed parameters to sqlite3_mutex_alloc() each return
|
| -** a pointer to a static preexisting mutex. {END} Six static mutexes are
|
| +** ^The other allowed parameters to sqlite3_mutex_alloc() (anything other
|
| +** than SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE) each return
|
| +** a pointer to a static preexisting mutex. ^Six static mutexes are
|
| ** used by the current version of SQLite. Future versions of SQLite
|
| ** may add additional static mutexes. Static mutexes are for internal
|
| ** use by SQLite only. Applications that use SQLite mutexes should
|
| ** use only the dynamic mutexes returned by SQLITE_MUTEX_FAST or
|
| ** SQLITE_MUTEX_RECURSIVE.
|
| **
|
| -** {H17018} Note that if one of the dynamic mutex parameters (SQLITE_MUTEX_FAST
|
| +** ^Note that if one of the dynamic mutex parameters (SQLITE_MUTEX_FAST
|
| ** or SQLITE_MUTEX_RECURSIVE) is used then sqlite3_mutex_alloc()
|
| -** returns a different mutex on every call. {H17034} But for the static
|
| +** returns a different mutex on every call. ^But for the static
|
| ** mutex types, the same mutex is returned on every call that has
|
| ** the same type number.
|
| **
|
| -** {H17019} The sqlite3_mutex_free() routine deallocates a previously
|
| -** allocated dynamic mutex. {H17020} SQLite is careful to deallocate every
|
| -** dynamic mutex that it allocates. {A17021} The dynamic mutexes must not be in
|
| -** use when they are deallocated. {A17022} Attempting to deallocate a static
|
| -** mutex results in undefined behavior. {H17023} SQLite never deallocates
|
| -** a static mutex. {END}
|
| +** ^The sqlite3_mutex_free() routine deallocates a previously
|
| +** allocated dynamic mutex. ^SQLite is careful to deallocate every
|
| +** dynamic mutex that it allocates. The dynamic mutexes must not be in
|
| +** use when they are deallocated. Attempting to deallocate a static
|
| +** mutex results in undefined behavior. ^SQLite never deallocates
|
| +** a static mutex.
|
| **
|
| -** The sqlite3_mutex_enter() and sqlite3_mutex_try() routines attempt
|
| -** to enter a mutex. {H17024} If another thread is already within the mutex,
|
| +** ^The sqlite3_mutex_enter() and sqlite3_mutex_try() routines attempt
|
| +** to enter a mutex. ^If another thread is already within the mutex,
|
| ** sqlite3_mutex_enter() will block and sqlite3_mutex_try() will return
|
| -** SQLITE_BUSY. {H17025} The sqlite3_mutex_try() interface returns [SQLITE_OK]
|
| -** upon successful entry. {H17026} Mutexes created using
|
| +** SQLITE_BUSY. ^The sqlite3_mutex_try() interface returns [SQLITE_OK]
|
| +** upon successful entry. ^(Mutexes created using
|
| ** SQLITE_MUTEX_RECURSIVE can be entered multiple times by the same thread.
|
| -** {H17027} In such cases the,
|
| +** In such cases the,
|
| ** mutex must be exited an equal number of times before another thread
|
| -** can enter. {A17028} If the same thread tries to enter any other
|
| +** can enter.)^ ^(If the same thread tries to enter any other
|
| ** kind of mutex more than once, the behavior is undefined.
|
| -** {H17029} SQLite will never exhibit
|
| -** such behavior in its own use of mutexes.
|
| +** SQLite will never exhibit
|
| +** such behavior in its own use of mutexes.)^
|
| **
|
| -** Some systems (for example, Windows 95) do not support the operation
|
| +** ^(Some systems (for example, Windows 95) do not support the operation
|
| ** implemented by sqlite3_mutex_try(). On those systems, sqlite3_mutex_try()
|
| -** will always return SQLITE_BUSY. {H17030} The SQLite core only ever uses
|
| -** sqlite3_mutex_try() as an optimization so this is acceptable behavior.
|
| +** will always return SQLITE_BUSY. The SQLite core only ever uses
|
| +** sqlite3_mutex_try() as an optimization so this is acceptable behavior.)^
|
| **
|
| -** {H17031} The sqlite3_mutex_leave() routine exits a mutex that was
|
| -** previously entered by the same thread. {A17032} The behavior
|
| +** ^The sqlite3_mutex_leave() routine exits a mutex that was
|
| +** previously entered by the same thread. ^(The behavior
|
| ** is undefined if the mutex is not currently entered by the
|
| -** calling thread or is not currently allocated. {H17033} SQLite will
|
| -** never do either. {END}
|
| +** calling thread or is not currently allocated. SQLite will
|
| +** never do either.)^
|
| **
|
| -** If the argument to sqlite3_mutex_enter(), sqlite3_mutex_try(), or
|
| +** ^If the argument to sqlite3_mutex_enter(), sqlite3_mutex_try(), or
|
| ** sqlite3_mutex_leave() is a NULL pointer, then all three routines
|
| ** behave as no-ops.
|
| **
|
| @@ -4852,8 +5052,7 @@ SQLITE_API int sqlite3_mutex_try(sqlite3_mutex*);
|
| SQLITE_API void sqlite3_mutex_leave(sqlite3_mutex*);
|
|
|
| /*
|
| -** CAPI3REF: Mutex Methods Object {H17120} <S20130>
|
| -** EXPERIMENTAL
|
| +** CAPI3REF: Mutex Methods Object
|
| **
|
| ** An instance of this structure defines the low-level routines
|
| ** used to allocate and use mutexes.
|
| @@ -4868,19 +5067,19 @@ SQLITE_API void sqlite3_mutex_leave(sqlite3_mutex*);
|
| ** output variable when querying the system for the current mutex
|
| ** implementation, using the [SQLITE_CONFIG_GETMUTEX] option.
|
| **
|
| -** The xMutexInit method defined by this structure is invoked as
|
| +** ^The xMutexInit method defined by this structure is invoked as
|
| ** part of system initialization by the sqlite3_initialize() function.
|
| -** {H17001} The xMutexInit routine shall be called by SQLite once for each
|
| +** ^The xMutexInit routine is called by SQLite exactly once for each
|
| ** effective call to [sqlite3_initialize()].
|
| **
|
| -** The xMutexEnd method defined by this structure is invoked as
|
| +** ^The xMutexEnd method defined by this structure is invoked as
|
| ** part of system shutdown by the sqlite3_shutdown() function. The
|
| ** implementation of this method is expected to release all outstanding
|
| ** resources obtained by the mutex methods implementation, especially
|
| -** those obtained by the xMutexInit method. {H17003} The xMutexEnd()
|
| -** interface shall be invoked once for each call to [sqlite3_shutdown()].
|
| +** those obtained by the xMutexInit method. ^The xMutexEnd()
|
| +** interface is invoked exactly once for each call to [sqlite3_shutdown()].
|
| **
|
| -** The remaining seven methods defined by this structure (xMutexAlloc,
|
| +** ^(The remaining seven methods defined by this structure (xMutexAlloc,
|
| ** xMutexFree, xMutexEnter, xMutexTry, xMutexLeave, xMutexHeld and
|
| ** xMutexNotheld) implement the following interfaces (respectively):
|
| **
|
| @@ -4892,7 +5091,7 @@ SQLITE_API void sqlite3_mutex_leave(sqlite3_mutex*);
|
| ** <li> [sqlite3_mutex_leave()] </li>
|
| ** <li> [sqlite3_mutex_held()] </li>
|
| ** <li> [sqlite3_mutex_notheld()] </li>
|
| -** </ul>
|
| +** </ul>)^
|
| **
|
| ** The only difference is that the public sqlite3_XXX functions enumerated
|
| ** above silently ignore any invocations that pass a NULL pointer instead
|
| @@ -4902,17 +5101,17 @@ SQLITE_API void sqlite3_mutex_leave(sqlite3_mutex*);
|
| ** (i.e. it is acceptable to provide an implementation that segfaults if
|
| ** it is passed a NULL pointer).
|
| **
|
| -** The xMutexInit() method must be threadsafe. It must be harmless to
|
| -** invoke xMutexInit() mutiple times within the same process and without
|
| +** The xMutexInit() method must be threadsafe. ^It must be harmless to
|
| +** invoke xMutexInit() multiple times within the same process and without
|
| ** intervening calls to xMutexEnd(). Second and subsequent calls to
|
| ** xMutexInit() must be no-ops.
|
| **
|
| -** xMutexInit() must not use SQLite memory allocation ([sqlite3_malloc()]
|
| -** and its associates). Similarly, xMutexAlloc() must not use SQLite memory
|
| -** allocation for a static mutex. However xMutexAlloc() may use SQLite
|
| +** ^xMutexInit() must not use SQLite memory allocation ([sqlite3_malloc()]
|
| +** and its associates). ^Similarly, xMutexAlloc() must not use SQLite memory
|
| +** allocation for a static mutex. ^However xMutexAlloc() may use SQLite
|
| ** memory allocation for a fast or recursive mutex.
|
| **
|
| -** SQLite will invoke the xMutexEnd() method when [sqlite3_shutdown()] is
|
| +** ^SQLite will invoke the xMutexEnd() method when [sqlite3_shutdown()] is
|
| ** called, but only if the prior call to xMutexInit returned SQLITE_OK.
|
| ** If xMutexInit fails in any way, it is expected to clean up after itself
|
| ** prior to returning.
|
| @@ -4931,39 +5130,41 @@ struct sqlite3_mutex_methods {
|
| };
|
|
|
| /*
|
| -** CAPI3REF: Mutex Verification Routines {H17080} <S20130> <S30800>
|
| +** CAPI3REF: Mutex Verification Routines
|
| **
|
| ** The sqlite3_mutex_held() and sqlite3_mutex_notheld() routines
|
| -** are intended for use inside assert() statements. {H17081} The SQLite core
|
| +** are intended for use inside assert() statements. ^The SQLite core
|
| ** never uses these routines except inside an assert() and applications
|
| -** are advised to follow the lead of the core. {H17082} The core only
|
| +** are advised to follow the lead of the core. ^The SQLite core only
|
| ** provides implementations for these routines when it is compiled
|
| -** with the SQLITE_DEBUG flag. {A17087} External mutex implementations
|
| +** with the SQLITE_DEBUG flag. ^External mutex implementations
|
| ** are only required to provide these routines if SQLITE_DEBUG is
|
| ** defined and if NDEBUG is not defined.
|
| **
|
| -** {H17083} These routines should return true if the mutex in their argument
|
| +** ^These routines should return true if the mutex in their argument
|
| ** is held or not held, respectively, by the calling thread.
|
| **
|
| -** {X17084} The implementation is not required to provided versions of these
|
| +** ^The implementation is not required to provided versions of these
|
| ** routines that actually work. If the implementation does not provide working
|
| ** versions of these routines, it should at least provide stubs that always
|
| ** return true so that one does not get spurious assertion failures.
|
| **
|
| -** {H17085} If the argument to sqlite3_mutex_held() is a NULL pointer then
|
| -** the routine should return 1. {END} This seems counter-intuitive since
|
| +** ^If the argument to sqlite3_mutex_held() is a NULL pointer then
|
| +** the routine should return 1. This seems counter-intuitive since
|
| ** clearly the mutex cannot be held if it does not exist. But the
|
| ** the reason the mutex does not exist is because the build is not
|
| ** using mutexes. And we do not want the assert() containing the
|
| ** call to sqlite3_mutex_held() to fail, so a non-zero return is
|
| -** the appropriate thing to do. {H17086} The sqlite3_mutex_notheld()
|
| +** the appropriate thing to do. ^The sqlite3_mutex_notheld()
|
| ** interface should also return 1 when given a NULL pointer.
|
| */
|
| +#ifndef NDEBUG
|
| SQLITE_API int sqlite3_mutex_held(sqlite3_mutex*);
|
| SQLITE_API int sqlite3_mutex_notheld(sqlite3_mutex*);
|
| +#endif
|
|
|
| /*
|
| -** CAPI3REF: Mutex Types {H17001} <H17000>
|
| +** CAPI3REF: Mutex Types
|
| **
|
| ** The [sqlite3_mutex_alloc()] interface takes a single argument
|
| ** which is one of these integer constants.
|
| @@ -4983,48 +5184,50 @@ SQLITE_API int sqlite3_mutex_notheld(sqlite3_mutex*);
|
| #define SQLITE_MUTEX_STATIC_LRU2 7 /* lru page list */
|
|
|
| /*
|
| -** CAPI3REF: Retrieve the mutex for a database connection {H17002} <H17000>
|
| +** CAPI3REF: Retrieve the mutex for a database connection
|
| **
|
| -** This interface returns a pointer the [sqlite3_mutex] object that
|
| +** ^This interface returns a pointer the [sqlite3_mutex] object that
|
| ** serializes access to the [database connection] given in the argument
|
| ** when the [threading mode] is Serialized.
|
| -** If the [threading mode] is Single-thread or Multi-thread then this
|
| +** ^If the [threading mode] is Single-thread or Multi-thread then this
|
| ** routine returns a NULL pointer.
|
| */
|
| SQLITE_API sqlite3_mutex *sqlite3_db_mutex(sqlite3*);
|
|
|
| /*
|
| -** CAPI3REF: Low-Level Control Of Database Files {H11300} <S30800>
|
| +** CAPI3REF: Low-Level Control Of Database Files
|
| **
|
| -** {H11301} The [sqlite3_file_control()] interface makes a direct call to the
|
| +** ^The [sqlite3_file_control()] interface makes a direct call to the
|
| ** xFileControl method for the [sqlite3_io_methods] object associated
|
| -** with a particular database identified by the second argument. {H11302} The
|
| -** name of the database is the name assigned to the database by the
|
| -** <a href="lang_attach.html">ATTACH</a> SQL command that opened the
|
| -** database. {H11303} To control the main database file, use the name "main"
|
| -** or a NULL pointer. {H11304} The third and fourth parameters to this routine
|
| +** with a particular database identified by the second argument. ^The
|
| +** name of the database "main" for the main database or "temp" for the
|
| +** TEMP database, or the name that appears after the AS keyword for
|
| +** databases that are added using the [ATTACH] SQL command.
|
| +** ^A NULL pointer can be used in place of "main" to refer to the
|
| +** main database file.
|
| +** ^The third and fourth parameters to this routine
|
| ** are passed directly through to the second and third parameters of
|
| -** the xFileControl method. {H11305} The return value of the xFileControl
|
| +** the xFileControl method. ^The return value of the xFileControl
|
| ** method becomes the return value of this routine.
|
| **
|
| -** {H11306} If the second parameter (zDbName) does not match the name of any
|
| -** open database file, then SQLITE_ERROR is returned. {H11307} This error
|
| +** ^If the second parameter (zDbName) does not match the name of any
|
| +** open database file, then SQLITE_ERROR is returned. ^This error
|
| ** code is not remembered and will not be recalled by [sqlite3_errcode()]
|
| -** or [sqlite3_errmsg()]. {A11308} The underlying xFileControl method might
|
| -** also return SQLITE_ERROR. {A11309} There is no way to distinguish between
|
| +** or [sqlite3_errmsg()]. The underlying xFileControl method might
|
| +** also return SQLITE_ERROR. There is no way to distinguish between
|
| ** an incorrect zDbName and an SQLITE_ERROR return from the underlying
|
| -** xFileControl method. {END}
|
| +** xFileControl method.
|
| **
|
| ** See also: [SQLITE_FCNTL_LOCKSTATE]
|
| */
|
| SQLITE_API int sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*);
|
|
|
| /*
|
| -** CAPI3REF: Testing Interface {H11400} <S30800>
|
| +** CAPI3REF: Testing Interface
|
| **
|
| -** The sqlite3_test_control() interface is used to read out internal
|
| +** ^The sqlite3_test_control() interface is used to read out internal
|
| ** state of SQLite and to inject faults into SQLite for testing
|
| -** purposes. The first parameter is an operation code that determines
|
| +** purposes. ^The first parameter is an operation code that determines
|
| ** the number, meaning, and operation of all subsequent parameters.
|
| **
|
| ** This interface is not for use by applications. It exists solely
|
| @@ -5039,7 +5242,7 @@ SQLITE_API int sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*
|
| SQLITE_API int sqlite3_test_control(int op, ...);
|
|
|
| /*
|
| -** CAPI3REF: Testing Interface Operation Codes {H11410} <H11400>
|
| +** CAPI3REF: Testing Interface Operation Codes
|
| **
|
| ** These constants are the valid operation code parameters used
|
| ** as the first argument to [sqlite3_test_control()].
|
| @@ -5049,6 +5252,7 @@ SQLITE_API int sqlite3_test_control(int op, ...);
|
| ** Applications should not use any of these parameters or the
|
| ** [sqlite3_test_control()] interface.
|
| */
|
| +#define SQLITE_TESTCTRL_FIRST 5
|
| #define SQLITE_TESTCTRL_PRNG_SAVE 5
|
| #define SQLITE_TESTCTRL_PRNG_RESTORE 6
|
| #define SQLITE_TESTCTRL_PRNG_RESET 7
|
| @@ -5059,27 +5263,31 @@ SQLITE_API int sqlite3_test_control(int op, ...);
|
| #define SQLITE_TESTCTRL_ASSERT 12
|
| #define SQLITE_TESTCTRL_ALWAYS 13
|
| #define SQLITE_TESTCTRL_RESERVE 14
|
| -
|
| -/*
|
| -** CAPI3REF: SQLite Runtime Status {H17200} <S60200>
|
| -** EXPERIMENTAL
|
| -**
|
| -** This interface is used to retrieve runtime status information
|
| -** about the preformance of SQLite, and optionally to reset various
|
| -** highwater marks. The first argument is an integer code for
|
| -** the specific parameter to measure. Recognized integer codes
|
| -** are of the form [SQLITE_STATUS_MEMORY_USED | SQLITE_STATUS_...].
|
| -** The current value of the parameter is returned into *pCurrent.
|
| -** The highest recorded value is returned in *pHighwater. If the
|
| +#define SQLITE_TESTCTRL_OPTIMIZATIONS 15
|
| +#define SQLITE_TESTCTRL_ISKEYWORD 16
|
| +#define SQLITE_TESTCTRL_PGHDRSZ 17
|
| +#define SQLITE_TESTCTRL_SCRATCHMALLOC 18
|
| +#define SQLITE_TESTCTRL_LAST 18
|
| +
|
| +/*
|
| +** CAPI3REF: SQLite Runtime Status
|
| +**
|
| +** ^This interface is used to retrieve runtime status information
|
| +** about the performance of SQLite, and optionally to reset various
|
| +** highwater marks. ^The first argument is an integer code for
|
| +** the specific parameter to measure. ^(Recognized integer codes
|
| +** are of the form [SQLITE_STATUS_MEMORY_USED | SQLITE_STATUS_...].)^
|
| +** ^The current value of the parameter is returned into *pCurrent.
|
| +** ^The highest recorded value is returned in *pHighwater. ^If the
|
| ** resetFlag is true, then the highest record value is reset after
|
| -** *pHighwater is written. Some parameters do not record the highest
|
| +** *pHighwater is written. ^(Some parameters do not record the highest
|
| ** value. For those parameters
|
| -** nothing is written into *pHighwater and the resetFlag is ignored.
|
| -** Other parameters record only the highwater mark and not the current
|
| -** value. For these latter parameters nothing is written into *pCurrent.
|
| +** nothing is written into *pHighwater and the resetFlag is ignored.)^
|
| +** ^(Other parameters record only the highwater mark and not the current
|
| +** value. For these latter parameters nothing is written into *pCurrent.)^
|
| **
|
| -** This routine returns SQLITE_OK on success and a non-zero
|
| -** [error code] on failure.
|
| +** ^The sqlite3_status() routine returns SQLITE_OK on success and a
|
| +** non-zero [error code] on failure.
|
| **
|
| ** This routine is threadsafe but is not atomic. This routine can be
|
| ** called while other threads are running the same or different SQLite
|
| @@ -5090,18 +5298,17 @@ SQLITE_API int sqlite3_test_control(int op, ...);
|
| **
|
| ** See also: [sqlite3_db_status()]
|
| */
|
| -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag);
|
| +SQLITE_API int sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag);
|
|
|
|
|
| /*
|
| -** CAPI3REF: Status Parameters {H17250} <H17200>
|
| -** EXPERIMENTAL
|
| +** CAPI3REF: Status Parameters
|
| **
|
| ** These integer constants designate various run-time status parameters
|
| ** that can be returned by [sqlite3_status()].
|
| **
|
| ** <dl>
|
| -** <dt>SQLITE_STATUS_MEMORY_USED</dt>
|
| +** ^(<dt>SQLITE_STATUS_MEMORY_USED</dt>
|
| ** <dd>This parameter is the current amount of memory checked out
|
| ** using [sqlite3_malloc()], either directly or indirectly. The
|
| ** figure includes calls made to [sqlite3_malloc()] by the application
|
| @@ -5109,63 +5316,66 @@ SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_status(int op, int *pCurrent, int *pH
|
| ** controlled by [SQLITE_CONFIG_SCRATCH] and auxiliary page-cache
|
| ** memory controlled by [SQLITE_CONFIG_PAGECACHE] is not included in
|
| ** this parameter. The amount returned is the sum of the allocation
|
| -** sizes as reported by the xSize method in [sqlite3_mem_methods].</dd>
|
| +** sizes as reported by the xSize method in [sqlite3_mem_methods].</dd>)^
|
| **
|
| -** <dt>SQLITE_STATUS_MALLOC_SIZE</dt>
|
| +** ^(<dt>SQLITE_STATUS_MALLOC_SIZE</dt>
|
| ** <dd>This parameter records the largest memory allocation request
|
| ** handed to [sqlite3_malloc()] or [sqlite3_realloc()] (or their
|
| ** internal equivalents). Only the value returned in the
|
| ** *pHighwater parameter to [sqlite3_status()] is of interest.
|
| -** The value written into the *pCurrent parameter is undefined.</dd>
|
| +** The value written into the *pCurrent parameter is undefined.</dd>)^
|
| **
|
| -** <dt>SQLITE_STATUS_PAGECACHE_USED</dt>
|
| +** ^(<dt>SQLITE_STATUS_MALLOC_COUNT</dt>
|
| +** <dd>This parameter records the number of separate memory allocations.</dd>)^
|
| +**
|
| +** ^(<dt>SQLITE_STATUS_PAGECACHE_USED</dt>
|
| ** <dd>This parameter returns the number of pages used out of the
|
| ** [pagecache memory allocator] that was configured using
|
| ** [SQLITE_CONFIG_PAGECACHE]. The
|
| -** value returned is in pages, not in bytes.</dd>
|
| +** value returned is in pages, not in bytes.</dd>)^
|
| **
|
| -** <dt>SQLITE_STATUS_PAGECACHE_OVERFLOW</dt>
|
| +** ^(<dt>SQLITE_STATUS_PAGECACHE_OVERFLOW</dt>
|
| ** <dd>This parameter returns the number of bytes of page cache
|
| -** allocation which could not be statisfied by the [SQLITE_CONFIG_PAGECACHE]
|
| +** allocation which could not be satisfied by the [SQLITE_CONFIG_PAGECACHE]
|
| ** buffer and where forced to overflow to [sqlite3_malloc()]. The
|
| ** returned value includes allocations that overflowed because they
|
| ** where too large (they were larger than the "sz" parameter to
|
| ** [SQLITE_CONFIG_PAGECACHE]) and allocations that overflowed because
|
| -** no space was left in the page cache.</dd>
|
| +** no space was left in the page cache.</dd>)^
|
| **
|
| -** <dt>SQLITE_STATUS_PAGECACHE_SIZE</dt>
|
| +** ^(<dt>SQLITE_STATUS_PAGECACHE_SIZE</dt>
|
| ** <dd>This parameter records the largest memory allocation request
|
| ** handed to [pagecache memory allocator]. Only the value returned in the
|
| ** *pHighwater parameter to [sqlite3_status()] is of interest.
|
| -** The value written into the *pCurrent parameter is undefined.</dd>
|
| +** The value written into the *pCurrent parameter is undefined.</dd>)^
|
| **
|
| -** <dt>SQLITE_STATUS_SCRATCH_USED</dt>
|
| +** ^(<dt>SQLITE_STATUS_SCRATCH_USED</dt>
|
| ** <dd>This parameter returns the number of allocations used out of the
|
| ** [scratch memory allocator] configured using
|
| ** [SQLITE_CONFIG_SCRATCH]. The value returned is in allocations, not
|
| ** in bytes. Since a single thread may only have one scratch allocation
|
| ** outstanding at time, this parameter also reports the number of threads
|
| -** using scratch memory at the same time.</dd>
|
| +** using scratch memory at the same time.</dd>)^
|
| **
|
| -** <dt>SQLITE_STATUS_SCRATCH_OVERFLOW</dt>
|
| +** ^(<dt>SQLITE_STATUS_SCRATCH_OVERFLOW</dt>
|
| ** <dd>This parameter returns the number of bytes of scratch memory
|
| -** allocation which could not be statisfied by the [SQLITE_CONFIG_SCRATCH]
|
| +** allocation which could not be satisfied by the [SQLITE_CONFIG_SCRATCH]
|
| ** buffer and where forced to overflow to [sqlite3_malloc()]. The values
|
| ** returned include overflows because the requested allocation was too
|
| ** larger (that is, because the requested allocation was larger than the
|
| ** "sz" parameter to [SQLITE_CONFIG_SCRATCH]) and because no scratch buffer
|
| ** slots were available.
|
| -** </dd>
|
| +** </dd>)^
|
| **
|
| -** <dt>SQLITE_STATUS_SCRATCH_SIZE</dt>
|
| +** ^(<dt>SQLITE_STATUS_SCRATCH_SIZE</dt>
|
| ** <dd>This parameter records the largest memory allocation request
|
| ** handed to [scratch memory allocator]. Only the value returned in the
|
| ** *pHighwater parameter to [sqlite3_status()] is of interest.
|
| -** The value written into the *pCurrent parameter is undefined.</dd>
|
| +** The value written into the *pCurrent parameter is undefined.</dd>)^
|
| **
|
| -** <dt>SQLITE_STATUS_PARSER_STACK</dt>
|
| +** ^(<dt>SQLITE_STATUS_PARSER_STACK</dt>
|
| ** <dd>This parameter records the deepest parser stack. It is only
|
| -** meaningful if SQLite is compiled with [YYTRACKMAXSTACKDEPTH].</dd>
|
| +** meaningful if SQLite is compiled with [YYTRACKMAXSTACKDEPTH].</dd>)^
|
| ** </dl>
|
| **
|
| ** New status parameters may be added from time to time.
|
| @@ -5179,30 +5389,34 @@ SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_status(int op, int *pCurrent, int *pH
|
| #define SQLITE_STATUS_PARSER_STACK 6
|
| #define SQLITE_STATUS_PAGECACHE_SIZE 7
|
| #define SQLITE_STATUS_SCRATCH_SIZE 8
|
| +#define SQLITE_STATUS_MALLOC_COUNT 9
|
|
|
| /*
|
| -** CAPI3REF: Database Connection Status {H17500} <S60200>
|
| -** EXPERIMENTAL
|
| +** CAPI3REF: Database Connection Status
|
| **
|
| -** This interface is used to retrieve runtime status information
|
| -** about a single [database connection]. The first argument is the
|
| -** database connection object to be interrogated. The second argument
|
| -** is the parameter to interrogate. Currently, the only allowed value
|
| -** for the second parameter is [SQLITE_DBSTATUS_LOOKASIDE_USED].
|
| -** Additional options will likely appear in future releases of SQLite.
|
| +** ^This interface is used to retrieve runtime status information
|
| +** about a single [database connection]. ^The first argument is the
|
| +** database connection object to be interrogated. ^The second argument
|
| +** is an integer constant, taken from the set of
|
| +** [SQLITE_DBSTATUS_LOOKASIDE_USED | SQLITE_DBSTATUS_*] macros, that
|
| +** determines the parameter to interrogate. The set of
|
| +** [SQLITE_DBSTATUS_LOOKASIDE_USED | SQLITE_DBSTATUS_*] macros is likely
|
| +** to grow in future releases of SQLite.
|
| **
|
| -** The current value of the requested parameter is written into *pCur
|
| -** and the highest instantaneous value is written into *pHiwtr. If
|
| +** ^The current value of the requested parameter is written into *pCur
|
| +** and the highest instantaneous value is written into *pHiwtr. ^If
|
| ** the resetFlg is true, then the highest instantaneous value is
|
| ** reset back down to the current value.
|
| **
|
| +** ^The sqlite3_db_status() routine returns SQLITE_OK on success and a
|
| +** non-zero [error code] on failure.
|
| +**
|
| ** See also: [sqlite3_status()] and [sqlite3_stmt_status()].
|
| */
|
| -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int resetFlg);
|
| +SQLITE_API int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int resetFlg);
|
|
|
| /*
|
| -** CAPI3REF: Status Parameters for database connections {H17520} <H17500>
|
| -** EXPERIMENTAL
|
| +** CAPI3REF: Status Parameters for database connections
|
| **
|
| ** These constants are the available integer "verbs" that can be passed as
|
| ** the second argument to the [sqlite3_db_status()] interface.
|
| @@ -5214,43 +5428,66 @@ SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_db_status(sqlite3*, int op, int *pCur
|
| ** if a discontinued or unsupported verb is invoked.
|
| **
|
| ** <dl>
|
| -** <dt>SQLITE_DBSTATUS_LOOKASIDE_USED</dt>
|
| +** ^(<dt>SQLITE_DBSTATUS_LOOKASIDE_USED</dt>
|
| ** <dd>This parameter returns the number of lookaside memory slots currently
|
| -** checked out.</dd>
|
| +** checked out.</dd>)^
|
| +**
|
| +** ^(<dt>SQLITE_DBSTATUS_CACHE_USED</dt>
|
| +** <dd>This parameter returns the approximate number of of bytes of heap
|
| +** memory used by all pager caches associated with the database connection.)^
|
| +** ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_USED is always 0.
|
| +**
|
| +** ^(<dt>SQLITE_DBSTATUS_SCHEMA_USED</dt>
|
| +** <dd>This parameter returns the approximate number of of bytes of heap
|
| +** memory used to store the schema for all databases associated
|
| +** with the connection - main, temp, and any [ATTACH]-ed databases.)^
|
| +** ^The full amount of memory used by the schemas is reported, even if the
|
| +** schema memory is shared with other database connections due to
|
| +** [shared cache mode] being enabled.
|
| +** ^The highwater mark associated with SQLITE_DBSTATUS_SCHEMA_USED is always 0.
|
| +**
|
| +** ^(<dt>SQLITE_DBSTATUS_STMT_USED</dt>
|
| +** <dd>This parameter returns the approximate number of of bytes of heap
|
| +** and lookaside memory used by all prepared statements associated with
|
| +** the database connection.)^
|
| +** ^The highwater mark associated with SQLITE_DBSTATUS_STMT_USED is always 0.
|
| +** </dd>
|
| ** </dl>
|
| */
|
| #define SQLITE_DBSTATUS_LOOKASIDE_USED 0
|
| +#define SQLITE_DBSTATUS_CACHE_USED 1
|
| +#define SQLITE_DBSTATUS_SCHEMA_USED 2
|
| +#define SQLITE_DBSTATUS_STMT_USED 3
|
| +#define SQLITE_DBSTATUS_MAX 3 /* Largest defined DBSTATUS */
|
|
|
|
|
| /*
|
| -** CAPI3REF: Prepared Statement Status {H17550} <S60200>
|
| -** EXPERIMENTAL
|
| +** CAPI3REF: Prepared Statement Status
|
| **
|
| -** Each prepared statement maintains various
|
| +** ^(Each prepared statement maintains various
|
| ** [SQLITE_STMTSTATUS_SORT | counters] that measure the number
|
| -** of times it has performed specific operations. These counters can
|
| +** of times it has performed specific operations.)^ These counters can
|
| ** be used to monitor the performance characteristics of the prepared
|
| ** statements. For example, if the number of table steps greatly exceeds
|
| ** the number of table searches or result rows, that would tend to indicate
|
| ** that the prepared statement is using a full table scan rather than
|
| ** an index.
|
| **
|
| -** This interface is used to retrieve and reset counter values from
|
| +** ^(This interface is used to retrieve and reset counter values from
|
| ** a [prepared statement]. The first argument is the prepared statement
|
| ** object to be interrogated. The second argument
|
| ** is an integer code for a specific [SQLITE_STMTSTATUS_SORT | counter]
|
| -** to be interrogated.
|
| -** The current value of the requested counter is returned.
|
| -** If the resetFlg is true, then the counter is reset to zero after this
|
| +** to be interrogated.)^
|
| +** ^The current value of the requested counter is returned.
|
| +** ^If the resetFlg is true, then the counter is reset to zero after this
|
| ** interface call returns.
|
| **
|
| ** See also: [sqlite3_status()] and [sqlite3_db_status()].
|
| */
|
| -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg);
|
| +SQLITE_API int sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg);
|
|
|
| /*
|
| -** CAPI3REF: Status Parameters for prepared statements {H17570} <H17550>
|
| -** EXPERIMENTAL
|
| +** CAPI3REF: Status Parameters for prepared statements
|
| **
|
| ** These preprocessor macros define integer codes that name counter
|
| ** values associated with the [sqlite3_stmt_status()] interface.
|
| @@ -5258,24 +5495,31 @@ SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_stmt_status(sqlite3_stmt*, int op,int
|
| **
|
| ** <dl>
|
| ** <dt>SQLITE_STMTSTATUS_FULLSCAN_STEP</dt>
|
| -** <dd>This is the number of times that SQLite has stepped forward in
|
| +** <dd>^This is the number of times that SQLite has stepped forward in
|
| ** a table as part of a full table scan. Large numbers for this counter
|
| ** may indicate opportunities for performance improvement through
|
| ** careful use of indices.</dd>
|
| **
|
| ** <dt>SQLITE_STMTSTATUS_SORT</dt>
|
| -** <dd>This is the number of sort operations that have occurred.
|
| +** <dd>^This is the number of sort operations that have occurred.
|
| ** A non-zero value in this counter may indicate an opportunity to
|
| ** improvement performance through careful use of indices.</dd>
|
| **
|
| +** <dt>SQLITE_STMTSTATUS_AUTOINDEX</dt>
|
| +** <dd>^This is the number of rows inserted into transient indices that
|
| +** were created automatically in order to help joins run faster.
|
| +** A non-zero value in this counter may indicate an opportunity to
|
| +** improvement performance by adding permanent indices that do not
|
| +** need to be reinitialized each time the statement is run.</dd>
|
| +**
|
| ** </dl>
|
| */
|
| #define SQLITE_STMTSTATUS_FULLSCAN_STEP 1
|
| #define SQLITE_STMTSTATUS_SORT 2
|
| +#define SQLITE_STMTSTATUS_AUTOINDEX 3
|
|
|
| /*
|
| ** CAPI3REF: Custom Page Cache Object
|
| -** EXPERIMENTAL
|
| **
|
| ** The sqlite3_pcache type is opaque. It is implemented by
|
| ** the pluggable module. The SQLite core has no knowledge of
|
| @@ -5290,84 +5534,96 @@ typedef struct sqlite3_pcache sqlite3_pcache;
|
| /*
|
| ** CAPI3REF: Application Defined Page Cache.
|
| ** KEYWORDS: {page cache}
|
| -** EXPERIMENTAL
|
| **
|
| -** The [sqlite3_config]([SQLITE_CONFIG_PCACHE], ...) interface can
|
| +** ^(The [sqlite3_config]([SQLITE_CONFIG_PCACHE], ...) interface can
|
| ** register an alternative page cache implementation by passing in an
|
| -** instance of the sqlite3_pcache_methods structure. The majority of the
|
| -** heap memory used by SQLite is used by the page cache to cache data read
|
| -** from, or ready to be written to, the database file. By implementing a
|
| -** custom page cache using this API, an application can control more
|
| -** precisely the amount of memory consumed by SQLite, the way in which
|
| +** instance of the sqlite3_pcache_methods structure.)^
|
| +** In many applications, most of the heap memory allocated by
|
| +** SQLite is used for the page cache.
|
| +** By implementing a
|
| +** custom page cache using this API, an application can better control
|
| +** the amount of memory consumed by SQLite, the way in which
|
| ** that memory is allocated and released, and the policies used to
|
| ** determine exactly which parts of a database file are cached and for
|
| ** how long.
|
| **
|
| -** The contents of the sqlite3_pcache_methods structure are copied to an
|
| +** The alternative page cache mechanism is an
|
| +** extreme measure that is only needed by the most demanding applications.
|
| +** The built-in page cache is recommended for most uses.
|
| +**
|
| +** ^(The contents of the sqlite3_pcache_methods structure are copied to an
|
| ** internal buffer by SQLite within the call to [sqlite3_config]. Hence
|
| ** the application may discard the parameter after the call to
|
| -** [sqlite3_config()] returns.
|
| -**
|
| -** The xInit() method is called once for each call to [sqlite3_initialize()]
|
| -** (usually only once during the lifetime of the process). It is passed
|
| -** a copy of the sqlite3_pcache_methods.pArg value. It can be used to set
|
| -** up global structures and mutexes required by the custom page cache
|
| -** implementation.
|
| -**
|
| -** The xShutdown() method is called from within [sqlite3_shutdown()],
|
| -** if the application invokes this API. It can be used to clean up
|
| +** [sqlite3_config()] returns.)^
|
| +**
|
| +** ^(The xInit() method is called once for each effective
|
| +** call to [sqlite3_initialize()])^
|
| +** (usually only once during the lifetime of the process). ^(The xInit()
|
| +** method is passed a copy of the sqlite3_pcache_methods.pArg value.)^
|
| +** The intent of the xInit() method is to set up global data structures
|
| +** required by the custom page cache implementation.
|
| +** ^(If the xInit() method is NULL, then the
|
| +** built-in default page cache is used instead of the application defined
|
| +** page cache.)^
|
| +**
|
| +** ^The xShutdown() method is called by [sqlite3_shutdown()].
|
| +** It can be used to clean up
|
| ** any outstanding resources before process shutdown, if required.
|
| +** ^The xShutdown() method may be NULL.
|
| **
|
| -** SQLite holds a [SQLITE_MUTEX_RECURSIVE] mutex when it invokes
|
| -** the xInit method, so the xInit method need not be threadsafe. The
|
| +** ^SQLite automatically serializes calls to the xInit method,
|
| +** so the xInit method need not be threadsafe. ^The
|
| ** xShutdown method is only called from [sqlite3_shutdown()] so it does
|
| ** not need to be threadsafe either. All other methods must be threadsafe
|
| ** in multithreaded applications.
|
| **
|
| -** SQLite will never invoke xInit() more than once without an intervening
|
| +** ^SQLite will never invoke xInit() more than once without an intervening
|
| ** call to xShutdown().
|
| **
|
| -** The xCreate() method is used to construct a new cache instance. SQLite
|
| -** will typically create one cache instance for each open database file,
|
| -** though this is not guaranteed. The
|
| +** ^SQLite invokes the xCreate() method to construct a new cache instance.
|
| +** SQLite will typically create one cache instance for each open database file,
|
| +** though this is not guaranteed. ^The
|
| ** first parameter, szPage, is the size in bytes of the pages that must
|
| -** be allocated by the cache. szPage will not be a power of two. szPage
|
| +** be allocated by the cache. ^szPage will not be a power of two. ^szPage
|
| ** will the page size of the database file that is to be cached plus an
|
| ** increment (here called "R") of about 100 or 200. SQLite will use the
|
| ** extra R bytes on each page to store metadata about the underlying
|
| ** database page on disk. The value of R depends
|
| ** on the SQLite version, the target platform, and how SQLite was compiled.
|
| -** R is constant for a particular build of SQLite. The second argument to
|
| +** ^R is constant for a particular build of SQLite. ^The second argument to
|
| ** xCreate(), bPurgeable, is true if the cache being created will
|
| ** be used to cache database pages of a file stored on disk, or
|
| ** false if it is used for an in-memory database. The cache implementation
|
| ** does not have to do anything special based with the value of bPurgeable;
|
| -** it is purely advisory. On a cache where bPurgeable is false, SQLite will
|
| +** it is purely advisory. ^On a cache where bPurgeable is false, SQLite will
|
| ** never invoke xUnpin() except to deliberately delete a page.
|
| -** In other words, a cache created with bPurgeable set to false will
|
| +** ^In other words, calls to xUnpin() on a cache with bPurgeable set to
|
| +** false will always have the "discard" flag set to true.
|
| +** ^Hence, a cache created with bPurgeable false will
|
| ** never contain any unpinned pages.
|
| **
|
| -** The xCachesize() method may be called at any time by SQLite to set the
|
| +** ^(The xCachesize() method may be called at any time by SQLite to set the
|
| ** suggested maximum cache-size (number of pages stored by) the cache
|
| ** instance passed as the first argument. This is the value configured using
|
| -** the SQLite "[PRAGMA cache_size]" command. As with the bPurgeable parameter,
|
| -** the implementation is not required to do anything with this
|
| +** the SQLite "[PRAGMA cache_size]" command.)^ As with the bPurgeable
|
| +** parameter, the implementation is not required to do anything with this
|
| ** value; it is advisory only.
|
| **
|
| -** The xPagecount() method should return the number of pages currently
|
| -** stored in the cache.
|
| +** The xPagecount() method must return the number of pages currently
|
| +** stored in the cache, both pinned and unpinned.
|
| **
|
| -** The xFetch() method is used to fetch a page and return a pointer to it.
|
| -** A 'page', in this context, is a buffer of szPage bytes aligned at an
|
| -** 8-byte boundary. The page to be fetched is determined by the key. The
|
| -** mimimum key value is 1. After it has been retrieved using xFetch, the page
|
| +** The xFetch() method locates a page in the cache and returns a pointer to
|
| +** the page, or a NULL pointer.
|
| +** A "page", in this context, means a buffer of szPage bytes aligned at an
|
| +** 8-byte boundary. The page to be fetched is determined by the key. ^The
|
| +** mimimum key value is 1. After it has been retrieved using xFetch, the page
|
| ** is considered to be "pinned".
|
| **
|
| ** If the requested page is already in the page cache, then the page cache
|
| ** implementation must return a pointer to the page buffer with its content
|
| ** intact. If the requested page is not already in the cache, then the
|
| -** behavior of the cache implementation is determined by the value of the
|
| -** createFlag parameter passed to xFetch, according to the following table:
|
| +** behavior of the cache implementation should use the value of the createFlag
|
| +** parameter to help it determined what action to take:
|
| **
|
| ** <table border=1 width=85% align=center>
|
| ** <tr><th> createFlag <th> Behaviour when page is not already in cache
|
| @@ -5378,29 +5634,28 @@ typedef struct sqlite3_pcache sqlite3_pcache;
|
| ** NULL if allocating a new page is effectively impossible.
|
| ** </table>
|
| **
|
| -** SQLite will normally invoke xFetch() with a createFlag of 0 or 1. If
|
| -** a call to xFetch() with createFlag==1 returns NULL, then SQLite will
|
| +** ^(SQLite will normally invoke xFetch() with a createFlag of 0 or 1. SQLite
|
| +** will only use a createFlag of 2 after a prior call with a createFlag of 1
|
| +** failed.)^ In between the to xFetch() calls, SQLite may
|
| ** attempt to unpin one or more cache pages by spilling the content of
|
| -** pinned pages to disk and synching the operating system disk cache. After
|
| -** attempting to unpin pages, the xFetch() method will be invoked again with
|
| -** a createFlag of 2.
|
| -**
|
| -** xUnpin() is called by SQLite with a pointer to a currently pinned page
|
| -** as its second argument. If the third parameter, discard, is non-zero,
|
| -** then the page should be evicted from the cache. In this case SQLite
|
| -** assumes that the next time the page is retrieved from the cache using
|
| -** the xFetch() method, it will be zeroed. If the discard parameter is
|
| -** zero, then the page is considered to be unpinned. The cache implementation
|
| +** pinned pages to disk and synching the operating system disk cache.
|
| +**
|
| +** ^xUnpin() is called by SQLite with a pointer to a currently pinned page
|
| +** as its second argument. If the third parameter, discard, is non-zero,
|
| +** then the page must be evicted from the cache.
|
| +** ^If the discard parameter is
|
| +** zero, then the page may be discarded or retained at the discretion of
|
| +** page cache implementation. ^The page cache implementation
|
| ** may choose to evict unpinned pages at any time.
|
| **
|
| -** The cache is not required to perform any reference counting. A single
|
| +** The cache must not perform any reference counting. A single
|
| ** call to xUnpin() unpins the page regardless of the number of prior calls
|
| ** to xFetch().
|
| **
|
| ** The xRekey() method is used to change the key value associated with the
|
| -** page passed as the second argument from oldKey to newKey. If the cache
|
| -** previously contains an entry associated with newKey, it should be
|
| -** discarded. Any prior cache entry associated with newKey is guaranteed not
|
| +** page passed as the second argument. If the cache
|
| +** previously contains an entry associated with newKey, it must be
|
| +** discarded. ^Any prior cache entry associated with newKey is guaranteed not
|
| ** to be pinned.
|
| **
|
| ** When SQLite calls the xTruncate() method, the cache must discard all
|
| @@ -5409,8 +5664,8 @@ typedef struct sqlite3_pcache sqlite3_pcache;
|
| ** of these pages are pinned, they are implicitly unpinned, meaning that
|
| ** they can be safely discarded.
|
| **
|
| -** The xDestroy() method is used to delete a cache allocated by xCreate().
|
| -** All resources associated with the specified cache should be freed. After
|
| +** ^The xDestroy() method is used to delete a cache allocated by xCreate().
|
| +** All resources associated with the specified cache should be freed. ^After
|
| ** calling the xDestroy() method, SQLite considers the [sqlite3_pcache*]
|
| ** handle invalid, and will not use it with any other sqlite3_pcache_methods
|
| ** functions.
|
| @@ -5432,10 +5687,9 @@ struct sqlite3_pcache_methods {
|
|
|
| /*
|
| ** CAPI3REF: Online Backup Object
|
| -** EXPERIMENTAL
|
| **
|
| ** The sqlite3_backup object records state information about an ongoing
|
| -** online backup operation. The sqlite3_backup object is created by
|
| +** online backup operation. ^The sqlite3_backup object is created by
|
| ** a call to [sqlite3_backup_init()] and is destroyed by a call to
|
| ** [sqlite3_backup_finish()].
|
| **
|
| @@ -5445,22 +5699,21 @@ typedef struct sqlite3_backup sqlite3_backup;
|
|
|
| /*
|
| ** CAPI3REF: Online Backup API.
|
| -** EXPERIMENTAL
|
| **
|
| -** This API is used to overwrite the contents of one database with that
|
| -** of another. It is useful either for creating backups of databases or
|
| +** The backup API copies the content of one database into another.
|
| +** It is useful either for creating backups of databases or
|
| ** for copying in-memory databases to or from persistent files.
|
| **
|
| ** See Also: [Using the SQLite Online Backup API]
|
| **
|
| -** Exclusive access is required to the destination database for the
|
| -** duration of the operation. However the source database is only
|
| -** read-locked while it is actually being read, it is not locked
|
| -** continuously for the entire operation. Thus, the backup may be
|
| -** performed on a live database without preventing other users from
|
| -** writing to the database for an extended period of time.
|
| +** ^Exclusive access is required to the destination database for the
|
| +** duration of the operation. ^However the source database is only
|
| +** read-locked while it is actually being read; it is not locked
|
| +** continuously for the entire backup operation. ^Thus, the backup may be
|
| +** performed on a live source database without preventing other users from
|
| +** reading or writing to the source database while the backup is underway.
|
| **
|
| -** To perform a backup operation:
|
| +** ^(To perform a backup operation:
|
| ** <ol>
|
| ** <li><b>sqlite3_backup_init()</b> is called once to initialize the
|
| ** backup,
|
| @@ -5468,143 +5721,152 @@ typedef struct sqlite3_backup sqlite3_backup;
|
| ** the data between the two databases, and finally
|
| ** <li><b>sqlite3_backup_finish()</b> is called to release all resources
|
| ** associated with the backup operation.
|
| -** </ol>
|
| +** </ol>)^
|
| ** There should be exactly one call to sqlite3_backup_finish() for each
|
| ** successful call to sqlite3_backup_init().
|
| **
|
| ** <b>sqlite3_backup_init()</b>
|
| **
|
| -** The first two arguments passed to [sqlite3_backup_init()] are the database
|
| -** handle associated with the destination database and the database name
|
| -** used to attach the destination database to the handle. The database name
|
| -** is "main" for the main database, "temp" for the temporary database, or
|
| -** the name specified as part of the [ATTACH] statement if the destination is
|
| -** an attached database. The third and fourth arguments passed to
|
| -** sqlite3_backup_init() identify the [database connection]
|
| -** and database name used
|
| -** to access the source database. The values passed for the source and
|
| -** destination [database connection] parameters must not be the same.
|
| -**
|
| -** If an error occurs within sqlite3_backup_init(), then NULL is returned
|
| -** and an error code and error message written into the [database connection]
|
| -** passed as the first argument. They may be retrieved using the
|
| -** [sqlite3_errcode()], [sqlite3_errmsg()], and [sqlite3_errmsg16()] functions.
|
| -** Otherwise, if successful, a pointer to an [sqlite3_backup] object is
|
| -** returned. This pointer may be used with the sqlite3_backup_step() and
|
| +** ^The D and N arguments to sqlite3_backup_init(D,N,S,M) are the
|
| +** [database connection] associated with the destination database
|
| +** and the database name, respectively.
|
| +** ^The database name is "main" for the main database, "temp" for the
|
| +** temporary database, or the name specified after the AS keyword in
|
| +** an [ATTACH] statement for an attached database.
|
| +** ^The S and M arguments passed to
|
| +** sqlite3_backup_init(D,N,S,M) identify the [database connection]
|
| +** and database name of the source database, respectively.
|
| +** ^The source and destination [database connections] (parameters S and D)
|
| +** must be different or else sqlite3_backup_init(D,N,S,M) will file with
|
| +** an error.
|
| +**
|
| +** ^If an error occurs within sqlite3_backup_init(D,N,S,M), then NULL is
|
| +** returned and an error code and error message are store3d in the
|
| +** destination [database connection] D.
|
| +** ^The error code and message for the failed call to sqlite3_backup_init()
|
| +** can be retrieved using the [sqlite3_errcode()], [sqlite3_errmsg()], and/or
|
| +** [sqlite3_errmsg16()] functions.
|
| +** ^A successful call to sqlite3_backup_init() returns a pointer to an
|
| +** [sqlite3_backup] object.
|
| +** ^The [sqlite3_backup] object may be used with the sqlite3_backup_step() and
|
| ** sqlite3_backup_finish() functions to perform the specified backup
|
| ** operation.
|
| **
|
| ** <b>sqlite3_backup_step()</b>
|
| **
|
| -** Function [sqlite3_backup_step()] is used to copy up to nPage pages between
|
| -** the source and destination databases, where nPage is the value of the
|
| -** second parameter passed to sqlite3_backup_step(). If nPage is a negative
|
| -** value, all remaining source pages are copied. If the required pages are
|
| -** succesfully copied, but there are still more pages to copy before the
|
| -** backup is complete, it returns [SQLITE_OK]. If no error occured and there
|
| -** are no more pages to copy, then [SQLITE_DONE] is returned. If an error
|
| -** occurs, then an SQLite error code is returned. As well as [SQLITE_OK] and
|
| +** ^Function sqlite3_backup_step(B,N) will copy up to N pages between
|
| +** the source and destination databases specified by [sqlite3_backup] object B.
|
| +** ^If N is negative, all remaining source pages are copied.
|
| +** ^If sqlite3_backup_step(B,N) successfully copies N pages and there
|
| +** are still more pages to be copied, then the function resturns [SQLITE_OK].
|
| +** ^If sqlite3_backup_step(B,N) successfully finishes copying all pages
|
| +** from source to destination, then it returns [SQLITE_DONE].
|
| +** ^If an error occurs while running sqlite3_backup_step(B,N),
|
| +** then an [error code] is returned. ^As well as [SQLITE_OK] and
|
| ** [SQLITE_DONE], a call to sqlite3_backup_step() may return [SQLITE_READONLY],
|
| ** [SQLITE_NOMEM], [SQLITE_BUSY], [SQLITE_LOCKED], or an
|
| ** [SQLITE_IOERR_ACCESS | SQLITE_IOERR_XXX] extended error code.
|
| **
|
| -** As well as the case where the destination database file was opened for
|
| -** read-only access, sqlite3_backup_step() may return [SQLITE_READONLY] if
|
| -** the destination is an in-memory database with a different page size
|
| -** from the source database.
|
| -**
|
| -** If sqlite3_backup_step() cannot obtain a required file-system lock, then
|
| +** ^(The sqlite3_backup_step() might return [SQLITE_READONLY] if
|
| +** <ol>
|
| +** <li> the destination database was opened read-only, or
|
| +** <li> the destination database is using write-ahead-log journaling
|
| +** and the destination and source page sizes differ, or
|
| +** <li> The destination database is an in-memory database and the
|
| +** destination and source page sizes differ.
|
| +** </ol>)^
|
| +**
|
| +** ^If sqlite3_backup_step() cannot obtain a required file-system lock, then
|
| ** the [sqlite3_busy_handler | busy-handler function]
|
| -** is invoked (if one is specified). If the
|
| +** is invoked (if one is specified). ^If the
|
| ** busy-handler returns non-zero before the lock is available, then
|
| -** [SQLITE_BUSY] is returned to the caller. In this case the call to
|
| -** sqlite3_backup_step() can be retried later. If the source
|
| +** [SQLITE_BUSY] is returned to the caller. ^In this case the call to
|
| +** sqlite3_backup_step() can be retried later. ^If the source
|
| ** [database connection]
|
| ** is being used to write to the source database when sqlite3_backup_step()
|
| -** is called, then [SQLITE_LOCKED] is returned immediately. Again, in this
|
| -** case the call to sqlite3_backup_step() can be retried later on. If
|
| +** is called, then [SQLITE_LOCKED] is returned immediately. ^Again, in this
|
| +** case the call to sqlite3_backup_step() can be retried later on. ^(If
|
| ** [SQLITE_IOERR_ACCESS | SQLITE_IOERR_XXX], [SQLITE_NOMEM], or
|
| ** [SQLITE_READONLY] is returned, then
|
| ** there is no point in retrying the call to sqlite3_backup_step(). These
|
| -** errors are considered fatal. At this point the application must accept
|
| +** errors are considered fatal.)^ The application must accept
|
| ** that the backup operation has failed and pass the backup operation handle
|
| ** to the sqlite3_backup_finish() to release associated resources.
|
| **
|
| -** Following the first call to sqlite3_backup_step(), an exclusive lock is
|
| -** obtained on the destination file. It is not released until either
|
| +** ^The first call to sqlite3_backup_step() obtains an exclusive lock
|
| +** on the destination file. ^The exclusive lock is not released until either
|
| ** sqlite3_backup_finish() is called or the backup operation is complete
|
| -** and sqlite3_backup_step() returns [SQLITE_DONE]. Additionally, each time
|
| -** a call to sqlite3_backup_step() is made a [shared lock] is obtained on
|
| -** the source database file. This lock is released before the
|
| -** sqlite3_backup_step() call returns. Because the source database is not
|
| -** locked between calls to sqlite3_backup_step(), it may be modified mid-way
|
| -** through the backup procedure. If the source database is modified by an
|
| +** and sqlite3_backup_step() returns [SQLITE_DONE]. ^Every call to
|
| +** sqlite3_backup_step() obtains a [shared lock] on the source database that
|
| +** lasts for the duration of the sqlite3_backup_step() call.
|
| +** ^Because the source database is not locked between calls to
|
| +** sqlite3_backup_step(), the source database may be modified mid-way
|
| +** through the backup process. ^If the source database is modified by an
|
| ** external process or via a database connection other than the one being
|
| -** used by the backup operation, then the backup will be transparently
|
| -** restarted by the next call to sqlite3_backup_step(). If the source
|
| +** used by the backup operation, then the backup will be automatically
|
| +** restarted by the next call to sqlite3_backup_step(). ^If the source
|
| ** database is modified by the using the same database connection as is used
|
| -** by the backup operation, then the backup database is transparently
|
| +** by the backup operation, then the backup database is automatically
|
| ** updated at the same time.
|
| **
|
| ** <b>sqlite3_backup_finish()</b>
|
| **
|
| -** Once sqlite3_backup_step() has returned [SQLITE_DONE], or when the
|
| -** application wishes to abandon the backup operation, the [sqlite3_backup]
|
| -** object should be passed to sqlite3_backup_finish(). This releases all
|
| -** resources associated with the backup operation. If sqlite3_backup_step()
|
| -** has not yet returned [SQLITE_DONE], then any active write-transaction on the
|
| -** destination database is rolled back. The [sqlite3_backup] object is invalid
|
| +** When sqlite3_backup_step() has returned [SQLITE_DONE], or when the
|
| +** application wishes to abandon the backup operation, the application
|
| +** should destroy the [sqlite3_backup] by passing it to sqlite3_backup_finish().
|
| +** ^The sqlite3_backup_finish() interfaces releases all
|
| +** resources associated with the [sqlite3_backup] object.
|
| +** ^If sqlite3_backup_step() has not yet returned [SQLITE_DONE], then any
|
| +** active write-transaction on the destination database is rolled back.
|
| +** The [sqlite3_backup] object is invalid
|
| ** and may not be used following a call to sqlite3_backup_finish().
|
| **
|
| -** The value returned by sqlite3_backup_finish is [SQLITE_OK] if no error
|
| -** occurred, regardless or whether or not sqlite3_backup_step() was called
|
| -** a sufficient number of times to complete the backup operation. Or, if
|
| -** an out-of-memory condition or IO error occured during a call to
|
| -** sqlite3_backup_step() then [SQLITE_NOMEM] or an
|
| -** [SQLITE_IOERR_ACCESS | SQLITE_IOERR_XXX] error code
|
| -** is returned. In this case the error code and an error message are
|
| -** written to the destination [database connection].
|
| -**
|
| -** A return of [SQLITE_BUSY] or [SQLITE_LOCKED] from sqlite3_backup_step() is
|
| -** not a permanent error and does not affect the return value of
|
| +** ^The value returned by sqlite3_backup_finish is [SQLITE_OK] if no
|
| +** sqlite3_backup_step() errors occurred, regardless or whether or not
|
| +** sqlite3_backup_step() completed.
|
| +** ^If an out-of-memory condition or IO error occurred during any prior
|
| +** sqlite3_backup_step() call on the same [sqlite3_backup] object, then
|
| +** sqlite3_backup_finish() returns the corresponding [error code].
|
| +**
|
| +** ^A return of [SQLITE_BUSY] or [SQLITE_LOCKED] from sqlite3_backup_step()
|
| +** is not a permanent error and does not affect the return value of
|
| ** sqlite3_backup_finish().
|
| **
|
| ** <b>sqlite3_backup_remaining(), sqlite3_backup_pagecount()</b>
|
| **
|
| -** Each call to sqlite3_backup_step() sets two values stored internally
|
| -** by an [sqlite3_backup] object. The number of pages still to be backed
|
| -** up, which may be queried by sqlite3_backup_remaining(), and the total
|
| -** number of pages in the source database file, which may be queried by
|
| -** sqlite3_backup_pagecount().
|
| +** ^Each call to sqlite3_backup_step() sets two values inside
|
| +** the [sqlite3_backup] object: the number of pages still to be backed
|
| +** up and the total number of pages in the source database file.
|
| +** The sqlite3_backup_remaining() and sqlite3_backup_pagecount() interfaces
|
| +** retrieve these two values, respectively.
|
| **
|
| -** The values returned by these functions are only updated by
|
| -** sqlite3_backup_step(). If the source database is modified during a backup
|
| +** ^The values returned by these functions are only updated by
|
| +** sqlite3_backup_step(). ^If the source database is modified during a backup
|
| ** operation, then the values are not updated to account for any extra
|
| ** pages that need to be updated or the size of the source database file
|
| ** changing.
|
| **
|
| ** <b>Concurrent Usage of Database Handles</b>
|
| **
|
| -** The source [database connection] may be used by the application for other
|
| +** ^The source [database connection] may be used by the application for other
|
| ** purposes while a backup operation is underway or being initialized.
|
| -** If SQLite is compiled and configured to support threadsafe database
|
| +** ^If SQLite is compiled and configured to support threadsafe database
|
| ** connections, then the source database connection may be used concurrently
|
| ** from within other threads.
|
| **
|
| -** However, the application must guarantee that the destination database
|
| -** connection handle is not passed to any other API (by any thread) after
|
| +** However, the application must guarantee that the destination
|
| +** [database connection] is not passed to any other API (by any thread) after
|
| ** sqlite3_backup_init() is called and before the corresponding call to
|
| -** sqlite3_backup_finish(). Unfortunately SQLite does not currently check
|
| -** for this, if the application does use the destination [database connection]
|
| -** for some other purpose during a backup operation, things may appear to
|
| -** work correctly but in fact be subtly malfunctioning. Use of the
|
| -** destination database connection while a backup is in progress might
|
| -** also cause a mutex deadlock.
|
| -**
|
| -** Furthermore, if running in [shared cache mode], the application must
|
| +** sqlite3_backup_finish(). SQLite does not currently check to see
|
| +** if the application incorrectly accesses the destination [database connection]
|
| +** and so no error code is reported, but the operations may malfunction
|
| +** nevertheless. Use of the destination database connection while a
|
| +** backup is in progress might also also cause a mutex deadlock.
|
| +**
|
| +** If running in [shared cache mode], the application must
|
| ** guarantee that the shared cache used by the destination database
|
| ** is not accessed while the backup is running. In practice this means
|
| -** that the application must guarantee that the file-system file being
|
| +** that the application must guarantee that the disk file being
|
| ** backed up to is not accessed by any connection within the process,
|
| ** not just the specific connection that was passed to sqlite3_backup_init().
|
| **
|
| @@ -5628,50 +5890,49 @@ SQLITE_API int sqlite3_backup_pagecount(sqlite3_backup *p);
|
|
|
| /*
|
| ** CAPI3REF: Unlock Notification
|
| -** EXPERIMENTAL
|
| **
|
| -** When running in shared-cache mode, a database operation may fail with
|
| +** ^When running in shared-cache mode, a database operation may fail with
|
| ** an [SQLITE_LOCKED] error if the required locks on the shared-cache or
|
| ** individual tables within the shared-cache cannot be obtained. See
|
| ** [SQLite Shared-Cache Mode] for a description of shared-cache locking.
|
| -** This API may be used to register a callback that SQLite will invoke
|
| +** ^This API may be used to register a callback that SQLite will invoke
|
| ** when the connection currently holding the required lock relinquishes it.
|
| -** This API is only available if the library was compiled with the
|
| +** ^This API is only available if the library was compiled with the
|
| ** [SQLITE_ENABLE_UNLOCK_NOTIFY] C-preprocessor symbol defined.
|
| **
|
| ** See Also: [Using the SQLite Unlock Notification Feature].
|
| **
|
| -** Shared-cache locks are released when a database connection concludes
|
| +** ^Shared-cache locks are released when a database connection concludes
|
| ** its current transaction, either by committing it or rolling it back.
|
| **
|
| -** When a connection (known as the blocked connection) fails to obtain a
|
| +** ^When a connection (known as the blocked connection) fails to obtain a
|
| ** shared-cache lock and SQLITE_LOCKED is returned to the caller, the
|
| ** identity of the database connection (the blocking connection) that
|
| -** has locked the required resource is stored internally. After an
|
| +** has locked the required resource is stored internally. ^After an
|
| ** application receives an SQLITE_LOCKED error, it may call the
|
| ** sqlite3_unlock_notify() method with the blocked connection handle as
|
| ** the first argument to register for a callback that will be invoked
|
| -** when the blocking connections current transaction is concluded. The
|
| +** when the blocking connections current transaction is concluded. ^The
|
| ** callback is invoked from within the [sqlite3_step] or [sqlite3_close]
|
| ** call that concludes the blocking connections transaction.
|
| **
|
| -** If sqlite3_unlock_notify() is called in a multi-threaded application,
|
| +** ^(If sqlite3_unlock_notify() is called in a multi-threaded application,
|
| ** there is a chance that the blocking connection will have already
|
| ** concluded its transaction by the time sqlite3_unlock_notify() is invoked.
|
| ** If this happens, then the specified callback is invoked immediately,
|
| -** from within the call to sqlite3_unlock_notify().
|
| +** from within the call to sqlite3_unlock_notify().)^
|
| **
|
| -** If the blocked connection is attempting to obtain a write-lock on a
|
| +** ^If the blocked connection is attempting to obtain a write-lock on a
|
| ** shared-cache table, and more than one other connection currently holds
|
| ** a read-lock on the same table, then SQLite arbitrarily selects one of
|
| ** the other connections to use as the blocking connection.
|
| **
|
| -** There may be at most one unlock-notify callback registered by a
|
| +** ^(There may be at most one unlock-notify callback registered by a
|
| ** blocked connection. If sqlite3_unlock_notify() is called when the
|
| ** blocked connection already has a registered unlock-notify callback,
|
| -** then the new callback replaces the old. If sqlite3_unlock_notify() is
|
| +** then the new callback replaces the old.)^ ^If sqlite3_unlock_notify() is
|
| ** called with a NULL pointer as its second argument, then any existing
|
| -** unlock-notify callback is cancelled. The blocked connections
|
| +** unlock-notify callback is canceled. ^The blocked connections
|
| ** unlock-notify callback may also be canceled by closing the blocked
|
| ** connection using [sqlite3_close()].
|
| **
|
| @@ -5679,7 +5940,7 @@ SQLITE_API int sqlite3_backup_pagecount(sqlite3_backup *p);
|
| ** any sqlite3_xxx API functions from within an unlock-notify callback, a
|
| ** crash or deadlock may be the result.
|
| **
|
| -** Unless deadlock is detected (see below), sqlite3_unlock_notify() always
|
| +** ^Unless deadlock is detected (see below), sqlite3_unlock_notify() always
|
| ** returns SQLITE_OK.
|
| **
|
| ** <b>Callback Invocation Details</b>
|
| @@ -5693,7 +5954,7 @@ SQLITE_API int sqlite3_backup_pagecount(sqlite3_backup *p);
|
| **
|
| ** When a blocking connections transaction is concluded, there may be
|
| ** more than one blocked connection that has registered for an unlock-notify
|
| -** callback. If two or more such blocked connections have specified the
|
| +** callback. ^If two or more such blocked connections have specified the
|
| ** same callback function, then instead of invoking the callback function
|
| ** multiple times, it is invoked once with the set of void* context pointers
|
| ** specified by the blocked connections bundled together into an array.
|
| @@ -5711,16 +5972,16 @@ SQLITE_API int sqlite3_backup_pagecount(sqlite3_backup *p);
|
| ** will proceed and the system may remain deadlocked indefinitely.
|
| **
|
| ** To avoid this scenario, the sqlite3_unlock_notify() performs deadlock
|
| -** detection. If a given call to sqlite3_unlock_notify() would put the
|
| +** detection. ^If a given call to sqlite3_unlock_notify() would put the
|
| ** system in a deadlocked state, then SQLITE_LOCKED is returned and no
|
| ** unlock-notify callback is registered. The system is said to be in
|
| ** a deadlocked state if connection A has registered for an unlock-notify
|
| ** callback on the conclusion of connection B's transaction, and connection
|
| ** B has itself registered for an unlock-notify callback when connection
|
| -** A's transaction is concluded. Indirect deadlock is also detected, so
|
| +** A's transaction is concluded. ^Indirect deadlock is also detected, so
|
| ** the system is also considered to be deadlocked if connection B has
|
| ** registered for an unlock-notify callback on the conclusion of connection
|
| -** C's transaction, where connection C is waiting on connection A. Any
|
| +** C's transaction, where connection C is waiting on connection A. ^Any
|
| ** number of levels of indirection are allowed.
|
| **
|
| ** <b>The "DROP TABLE" Exception</b>
|
| @@ -5736,10 +5997,10 @@ SQLITE_API int sqlite3_backup_pagecount(sqlite3_backup *p);
|
| ** or "DROP INDEX" query, an infinite loop might be the result.
|
| **
|
| ** One way around this problem is to check the extended error code returned
|
| -** by an sqlite3_step() call. If there is a blocking connection, then the
|
| +** by an sqlite3_step() call. ^(If there is a blocking connection, then the
|
| ** extended error code is set to SQLITE_LOCKED_SHAREDCACHE. Otherwise, in
|
| ** the special "DROP TABLE/INDEX" case, the extended error code is just
|
| -** SQLITE_LOCKED.
|
| +** SQLITE_LOCKED.)^
|
| */
|
| SQLITE_API int sqlite3_unlock_notify(
|
| sqlite3 *pBlocked, /* Waiting connection */
|
| @@ -5750,16 +6011,121 @@ SQLITE_API int sqlite3_unlock_notify(
|
|
|
| /*
|
| ** CAPI3REF: String Comparison
|
| -** EXPERIMENTAL
|
| **
|
| -** The [sqlite3_strnicmp()] API allows applications and extensions to
|
| +** ^The [sqlite3_strnicmp()] API allows applications and extensions to
|
| ** compare the contents of two buffers containing UTF-8 strings in a
|
| -** case-indendent fashion, using the same definition of case independence
|
| +** case-independent fashion, using the same definition of case independence
|
| ** that SQLite uses internally when comparing identifiers.
|
| */
|
| SQLITE_API int sqlite3_strnicmp(const char *, const char *, int);
|
|
|
| /*
|
| +** CAPI3REF: Error Logging Interface
|
| +**
|
| +** ^The [sqlite3_log()] interface writes a message into the error log
|
| +** established by the [SQLITE_CONFIG_LOG] option to [sqlite3_config()].
|
| +** ^If logging is enabled, the zFormat string and subsequent arguments are
|
| +** used with [sqlite3_snprintf()] to generate the final output string.
|
| +**
|
| +** The sqlite3_log() interface is intended for use by extensions such as
|
| +** virtual tables, collating functions, and SQL functions. While there is
|
| +** nothing to prevent an application from calling sqlite3_log(), doing so
|
| +** is considered bad form.
|
| +**
|
| +** The zFormat string must not be NULL.
|
| +**
|
| +** To avoid deadlocks and other threading problems, the sqlite3_log() routine
|
| +** will not use dynamically allocated memory. The log message is stored in
|
| +** a fixed-length buffer on the stack. If the log message is longer than
|
| +** a few hundred characters, it will be truncated to the length of the
|
| +** buffer.
|
| +*/
|
| +SQLITE_API void sqlite3_log(int iErrCode, const char *zFormat, ...);
|
| +
|
| +/*
|
| +** CAPI3REF: Write-Ahead Log Commit Hook
|
| +**
|
| +** ^The [sqlite3_wal_hook()] function is used to register a callback that
|
| +** will be invoked each time a database connection commits data to a
|
| +** [write-ahead log] (i.e. whenever a transaction is committed in
|
| +** [journal_mode | journal_mode=WAL mode]).
|
| +**
|
| +** ^The callback is invoked by SQLite after the commit has taken place and
|
| +** the associated write-lock on the database released, so the implementation
|
| +** may read, write or [checkpoint] the database as required.
|
| +**
|
| +** ^The first parameter passed to the callback function when it is invoked
|
| +** is a copy of the third parameter passed to sqlite3_wal_hook() when
|
| +** registering the callback. ^The second is a copy of the database handle.
|
| +** ^The third parameter is the name of the database that was written to -
|
| +** either "main" or the name of an [ATTACH]-ed database. ^The fourth parameter
|
| +** is the number of pages currently in the write-ahead log file,
|
| +** including those that were just committed.
|
| +**
|
| +** The callback function should normally return [SQLITE_OK]. ^If an error
|
| +** code is returned, that error will propagate back up through the
|
| +** SQLite code base to cause the statement that provoked the callback
|
| +** to report an error, though the commit will have still occurred. If the
|
| +** callback returns [SQLITE_ROW] or [SQLITE_DONE], or if it returns a value
|
| +** that does not correspond to any valid SQLite error code, the results
|
| +** are undefined.
|
| +**
|
| +** A single database handle may have at most a single write-ahead log callback
|
| +** registered at one time. ^Calling [sqlite3_wal_hook()] replaces any
|
| +** previously registered write-ahead log callback. ^Note that the
|
| +** [sqlite3_wal_autocheckpoint()] interface and the
|
| +** [wal_autocheckpoint pragma] both invoke [sqlite3_wal_hook()] and will
|
| +** those overwrite any prior [sqlite3_wal_hook()] settings.
|
| +*/
|
| +SQLITE_API void *sqlite3_wal_hook(
|
| + sqlite3*,
|
| + int(*)(void *,sqlite3*,const char*,int),
|
| + void*
|
| +);
|
| +
|
| +/*
|
| +** CAPI3REF: Configure an auto-checkpoint
|
| +**
|
| +** ^The [sqlite3_wal_autocheckpoint(D,N)] is a wrapper around
|
| +** [sqlite3_wal_hook()] that causes any database on [database connection] D
|
| +** to automatically [checkpoint]
|
| +** after committing a transaction if there are N or
|
| +** more frames in the [write-ahead log] file. ^Passing zero or
|
| +** a negative value as the nFrame parameter disables automatic
|
| +** checkpoints entirely.
|
| +**
|
| +** ^The callback registered by this function replaces any existing callback
|
| +** registered using [sqlite3_wal_hook()]. ^Likewise, registering a callback
|
| +** using [sqlite3_wal_hook()] disables the automatic checkpoint mechanism
|
| +** configured by this function.
|
| +**
|
| +** ^The [wal_autocheckpoint pragma] can be used to invoke this interface
|
| +** from SQL.
|
| +**
|
| +** ^Every new [database connection] defaults to having the auto-checkpoint
|
| +** enabled with a threshold of 1000 pages. The use of this interface
|
| +** is only necessary if the default setting is found to be suboptimal
|
| +** for a particular application.
|
| +*/
|
| +SQLITE_API int sqlite3_wal_autocheckpoint(sqlite3 *db, int N);
|
| +
|
| +/*
|
| +** CAPI3REF: Checkpoint a database
|
| +**
|
| +** ^The [sqlite3_wal_checkpoint(D,X)] interface causes database named X
|
| +** on [database connection] D to be [checkpointed]. ^If X is NULL or an
|
| +** empty string, then a checkpoint is run on all databases of
|
| +** connection D. ^If the database connection D is not in
|
| +** [WAL | write-ahead log mode] then this interface is a harmless no-op.
|
| +**
|
| +** ^The [wal_checkpoint pragma] can be used to invoke this interface
|
| +** from SQL. ^The [sqlite3_wal_autocheckpoint()] interface and the
|
| +** [wal_autocheckpoint pragma] can be used to cause this interface to be
|
| +** run whenever the WAL reaches a certain size threshold.
|
| +*/
|
| +SQLITE_API int sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb);
|
| +
|
| +/*
|
| ** Undo the hack that converts floating point types to integer for
|
| ** builds on processors without floating point support.
|
| */
|
| @@ -5772,3 +6138,59 @@ SQLITE_API int sqlite3_strnicmp(const char *, const char *, int);
|
| #endif
|
| #endif
|
|
|
| +/*
|
| +** 2010 August 30
|
| +**
|
| +** The author disclaims copyright to this source code. In place of
|
| +** a legal notice, here is a blessing:
|
| +**
|
| +** May you do good and not evil.
|
| +** May you find forgiveness for yourself and forgive others.
|
| +** May you share freely, never taking more than you give.
|
| +**
|
| +*************************************************************************
|
| +*/
|
| +
|
| +#ifndef _SQLITE3RTREE_H_
|
| +#define _SQLITE3RTREE_H_
|
| +
|
| +
|
| +#ifdef __cplusplus
|
| +extern "C" {
|
| +#endif
|
| +
|
| +typedef struct sqlite3_rtree_geometry sqlite3_rtree_geometry;
|
| +
|
| +/*
|
| +** Register a geometry callback named zGeom that can be used as part of an
|
| +** R-Tree geometry query as follows:
|
| +**
|
| +** SELECT ... FROM <rtree> WHERE <rtree col> MATCH $zGeom(... params ...)
|
| +*/
|
| +SQLITE_API int sqlite3_rtree_geometry_callback(
|
| + sqlite3 *db,
|
| + const char *zGeom,
|
| + int (*xGeom)(sqlite3_rtree_geometry *, int nCoord, double *aCoord, int *pRes),
|
| + void *pContext
|
| +);
|
| +
|
| +
|
| +/*
|
| +** A pointer to a structure of the following type is passed as the first
|
| +** argument to callbacks registered using rtree_geometry_callback().
|
| +*/
|
| +struct sqlite3_rtree_geometry {
|
| + void *pContext; /* Copy of pContext passed to s_r_g_c() */
|
| + int nParam; /* Size of array aParam[] */
|
| + double *aParam; /* Parameters passed to SQL geom function */
|
| + void *pUser; /* Callback implementation user data */
|
| + void (*xDelUser)(void *); /* Called by SQLite to clean up pUser */
|
| +};
|
| +
|
| +
|
| +#ifdef __cplusplus
|
| +} /* end of the 'extern "C"' block */
|
| +#endif
|
| +
|
| +#endif /* ifndef _SQLITE3RTREE_H_ */
|
| +
|
|
|
Chromium Code Reviews
Issue 5626002:
Update sqlite to 3.7.3. (Closed)
Base URL: svn://svn.chromium.org/chrome/trunk/src/third_party/sqlite/src