Update sqlite to 3.7.3.

third_party/sqlite/src/test/trigger3.test

 # The author disclaims copyright to this source code.  In place of
 # a legal notice, here is a blessing:
 #
 #    May you do good and not evil.
 #    May you find forgiveness for yourself and forgive others.
 #    May you share freely, never taking more than you give.
 #
 #***********************************************************************
 #
 # This file tests the RAISE() function.
@@ skipping 10 matching lines @@
 # The tests in this file were written before SQLite supported recursive }
 # trigger invocation, and some tests depend on that to pass. So disable
 # recursive triggers for this file.
 catchsql { pragma recursive_triggers = off } 
 
 # Test that we can cause ROLLBACK, FAIL and ABORT correctly
 #
 catchsql { CREATE TABLE tbl(a, b ,c) }
 execsql {
     CREATE TRIGGER before_tbl_insert BEFORE INSERT ON tbl BEGIN SELECT CASE 
-        WHEN (new.a = 4) THEN RAISE(IGNORE) END;
+        WHEN (new.a = 4) THEN RAISE(IGNORE) END;
     END;
 
     CREATE TRIGGER after_tbl_insert AFTER INSERT ON tbl BEGIN SELECT CASE 
-        WHEN (new.a = 1) THEN RAISE(ABORT,    'Trigger abort') 
-        WHEN (new.a = 2) THEN RAISE(FAIL,     'Trigger fail') 
-        WHEN (new.a = 3) THEN RAISE(ROLLBACK, 'Trigger rollback') END;
+        WHEN (new.a = 1) THEN RAISE(ABORT,    'Trigger abort') 
+        WHEN (new.a = 2) THEN RAISE(FAIL,     'Trigger fail') 
+        WHEN (new.a = 3) THEN RAISE(ROLLBACK, 'Trigger rollback') END;
     END;
 }
 # ABORT
 do_test trigger3-1.1 {
     catchsql {
-        BEGIN;
+        BEGIN;
         INSERT INTO tbl VALUES (5, 5, 6);
         INSERT INTO tbl VALUES (1, 5, 6);
     }
 } {1 {Trigger abort}}
 do_test trigger3-1.2 {
     execsql {
-        SELECT * FROM tbl;
-        ROLLBACK;
+        SELECT * FROM tbl;
+        ROLLBACK;
     }
 } {5 5 6}
 do_test trigger3-1.3 {
     execsql {SELECT * FROM tbl}
 } {}
 
 # FAIL
 do_test trigger3-2.1 {
     catchsql {
         BEGIN;
         INSERT INTO tbl VALUES (5, 5, 6);
         INSERT INTO tbl VALUES (2, 5, 6);
     }
 } {1 {Trigger fail}}
 do_test trigger3-2.2 {
     execsql {
-        SELECT * FROM tbl;
-        ROLLBACK;
+        SELECT * FROM tbl;
+        ROLLBACK;
     }
 } {5 5 6 2 5 6}
 # ROLLBACK
 do_test trigger3-3.1 {
     catchsql {
-        BEGIN;
+        BEGIN;
         INSERT INTO tbl VALUES (5, 5, 6);
         INSERT INTO tbl VALUES (3, 5, 6);
     }
 } {1 {Trigger rollback}}
 do_test trigger3-3.2 {
     execsql {
-        SELECT * FROM tbl;
+        SELECT * FROM tbl;
     }
 } {}
 
 # Verify that a ROLLBACK trigger works like a FAIL trigger if
 # we are not within a transaction.  Ticket #3035.
 #
 do_test trigger3-3.3 {
     catchsql {COMMIT}
     catchsql {
         INSERT INTO tbl VALUES (3, 9, 10);
     }
 } {1 {Trigger rollback}}
 do_test trigger3-3.4 {
     execsql {SELECT * FROM tbl}
 } {}
 
 # IGNORE
 do_test trigger3-4.1 {
     catchsql {
-        BEGIN;
+        BEGIN;
         INSERT INTO tbl VALUES (5, 5, 6);
         INSERT INTO tbl VALUES (4, 5, 6);
     }
 } {0 {}}
 do_test trigger3-4.2 {
     execsql {
-        SELECT * FROM tbl;
-        ROLLBACK;
+        SELECT * FROM tbl;
+        ROLLBACK;
     }
 } {5 5 6}
 
 # Check that we can also do RAISE(IGNORE) for UPDATE and DELETE
 execsql {DROP TABLE tbl;}
 execsql {CREATE TABLE tbl (a, b, c);}
 execsql {INSERT INTO tbl VALUES(1, 2, 3);}
 execsql {INSERT INTO tbl VALUES(4, 5, 6);}
 execsql {
     CREATE TRIGGER before_tbl_update BEFORE UPDATE ON tbl BEGIN
-        SELECT CASE WHEN (old.a = 1) THEN RAISE(IGNORE) END;
+        SELECT CASE WHEN (old.a = 1) THEN RAISE(IGNORE) END;
     END;
 
     CREATE TRIGGER before_tbl_delete BEFORE DELETE ON tbl BEGIN
-        SELECT CASE WHEN (old.a = 1) THEN RAISE(IGNORE) END;
+        SELECT CASE WHEN (old.a = 1) THEN RAISE(IGNORE) END;
     END;
 }
 do_test trigger3-5.1 {
     execsql {
-        UPDATE tbl SET c = 10;
-        SELECT * FROM tbl;
+        UPDATE tbl SET c = 10;
+        SELECT * FROM tbl;
     }
 } {1 2 3 4 5 10}
 do_test trigger3-5.2 {
     execsql {
-        DELETE FROM tbl;
-        SELECT * FROM tbl;
+        DELETE FROM tbl;
+        SELECT * FROM tbl;
     }
 } {1 2 3}
 
 # Check that RAISE(IGNORE) works correctly for nested triggers:
 execsql {CREATE TABLE tbl2(a, b, c)}
 execsql {
     CREATE TRIGGER after_tbl2_insert AFTER INSERT ON tbl2 BEGIN
-        UPDATE tbl SET c = 10;
+        UPDATE tbl SET c = 10;
         INSERT INTO tbl2 VALUES (new.a, new.b, new.c);
     END;
 }
 do_test trigger3-6 {
     execsql {
-        INSERT INTO tbl2 VALUES (1, 2, 3);
-        SELECT * FROM tbl2;
-        SELECT * FROM tbl;
+        INSERT INTO tbl2 VALUES (1, 2, 3);
+        SELECT * FROM tbl2;
+        SELECT * FROM tbl;
     }
 } {1 2 3 1 2 3 1 2 3}
 
 # Check that things also work for view-triggers
 
 ifcapable view {
 
 execsql {CREATE VIEW tbl_view AS SELECT * FROM tbl}
 execsql {
     CREATE TRIGGER tbl_view_insert INSTEAD OF INSERT ON tbl_view BEGIN
-        SELECT CASE WHEN (new.a = 1) THEN RAISE(ROLLBACK, 'View rollback')
-                    WHEN (new.a = 2) THEN RAISE(IGNORE) 
-                    WHEN (new.a = 3) THEN RAISE(ABORT, 'View abort') END;
+        SELECT CASE WHEN (new.a = 1) THEN RAISE(ROLLBACK, 'View rollback')
+                    WHEN (new.a = 2) THEN RAISE(IGNORE) 
+                    WHEN (new.a = 3) THEN RAISE(ABORT, 'View abort') END;
     END;
 }
 
 do_test trigger3-7.1 {
     catchsql {
-        INSERT INTO tbl_view VALUES(1, 2, 3);
+        INSERT INTO tbl_view VALUES(1, 2, 3);
     }
 } {1 {View rollback}}
 do_test trigger3-7.2 {
     catchsql {
-        INSERT INTO tbl_view VALUES(2, 2, 3);
+        INSERT INTO tbl_view VALUES(2, 2, 3);
     }
 } {0 {}}
 do_test trigger3-7.3 {
     catchsql {
-        INSERT INTO tbl_view VALUES(3, 2, 3);
+        INSERT INTO tbl_view VALUES(3, 2, 3);
     }
 } {1 {View abort}}
 
 } ;# ifcapable view
 
 integrity_check trigger3-8.1
 
 catchsql { DROP TABLE tbl; } 
 catchsql { DROP TABLE tbl2; } 
 catchsql { DROP VIEW tbl_view; }
 
 finish_test