Check in the pristine copy of ICU 4.6...

icu46/source/i18n/olsontz.h

Index: icu46/source/i18n/olsontz.h
===================================================================
--- icu46/source/i18n/olsontz.h	(revision 0)
+++ icu46/source/i18n/olsontz.h	(revision 0)
@@ -0,0 +1,427 @@
+/*
+**********************************************************************
+* Copyright (c) 2003-2010, International Business Machines
+* Corporation and others.  All Rights Reserved.
+**********************************************************************
+* Author: Alan Liu
+* Created: July 21 2003
+* Since: ICU 2.8
+**********************************************************************
+*/
+#ifndef OLSONTZ_H
+#define OLSONTZ_H
+
+#include "unicode/utypes.h"
+
+#if !UCONFIG_NO_FORMATTING
+
+#include "unicode/basictz.h"
+
+struct UResourceBundle;
+
+U_NAMESPACE_BEGIN
+
+class SimpleTimeZone;
+
+/**
+ * A time zone based on the Olson tz database.  Olson time zones change
+ * behavior over time.  The raw offset, rules, presence or absence of
+ * daylight savings time, and even the daylight savings amount can all
+ * vary.
+ *
+ * This class uses a resource bundle named "zoneinfo".  Zoneinfo is a
+ * table containing different kinds of resources.  In several places,
+ * zones are referred to using integers.  A zone's integer is a number
+ * from 0..n-1, where n is the number of zones, with the zones sorted
+ * in lexicographic order.
+ *
+ * 1. Zones.  These have keys corresponding to the Olson IDs, e.g.,
+ * "Asia/Shanghai".  Each resource describes the behavior of the given
+ * zone.  Zones come in two different formats.
+ *
+ *   a. Zone (table).  A zone is a table resource contains several
+ *   type of resources below:
+ *  
+ *   - typeOffsets:intvector (Required)
+ *  
+ *   Sets of UTC raw/dst offset pairs in seconds.  Entries at
+ *   2n represents raw offset and 2n+1 represents dst offset
+ *   paired with the raw offset at 2n.  The very first pair represents
+ *   the initial zone offset (before the first transition) always.
+ *
+ *   - trans:intvector (Optional) 
+ *  
+ *   List of transition times represented by 32bit seconds from the
+ *   epoch (1970-01-01T00:00Z) in ascending order.
+ *  
+ *   - transPre32/transPost32:intvector (Optional)
+ *  
+ *   List of transition times before/after 32bit minimum seconds.
+ *   Each time is represented by a pair of 32bit integer.
+ * 
+ *   - typeMap:bin (Optional)
+ *  
+ *   Array of bytes representing the mapping between each transition
+ *   time (transPre32/trans/transPost32) and its corresponding offset
+ *   data (typeOffsets).
+ *  
+ *   - finalRule:string (Optional)
+ *  
+ *   If a recurrent transition rule is applicable to a zone forever
+ *   after the final transition time, finalRule represents the rule
+ *   in Rules data.
+ *  
+ *   - finalRaw:int (Optional)
+ *   
+ *   When finalRule is available, finalRaw is required and specifies
+ *   the raw (base) offset of the rule.
+ *   
+ *   - finalYear:int (Optional)
+ *   
+ *   When finalRule is available, finalYear is required and specifies
+ *   the start year of the rule.
+ *   
+ *   - links:intvector (Optional)
+ *   
+ *   When this zone data is shared with other zones, links specifies
+ *   all zones including the zone itself.  Each zone is referenced by
+ *   integer index.
+ * 
+ *  b. Link (int, length 1).  A link zone is an int resource.  The
+ *  integer is the zone number of the target zone.  The key of this
+ *  resource is an alternate name for the target zone.  This data
+ *  is corresponding to Link data in the tz database.
+ *
+ *
+ * 2. Rules.  These have keys corresponding to the Olson rule IDs,
+ * with an underscore prepended, e.g., "_EU".  Each resource describes
+ * the behavior of the given rule using an intvector, containing the
+ * onset list, the cessation list, and the DST savings.  The onset and
+ * cessation lists consist of the month, dowim, dow, time, and time
+ * mode.  The end result is that the 11 integers describing the rule
+ * can be passed directly into the SimpleTimeZone 13-argument
+ * constructor (the other two arguments will be the raw offset, taken
+ * from the complex zone element 5, and the ID string, which is not
+ * used), with the times and the DST savings multiplied by 1000 to
+ * scale from seconds to milliseconds.
+ *
+ * 3. Regions.  An array specifies mapping between zones and regions.
+ * Each item is either a 2-letter ISO country code or "001"
+ * (UN M.49 - World).  This data is generated from "zone.tab"
+ * in the tz database.
+ */
+class U_I18N_API OlsonTimeZone: public BasicTimeZone {
+ public:
+    /**
+     * Construct from a resource bundle.
+     * @param top the top-level zoneinfo resource bundle.  This is used
+     * to lookup the rule that `res' may refer to, if there is one.
+     * @param res the resource bundle of the zone to be constructed
+     * @param ec input-output error code
+     */
+    OlsonTimeZone(const UResourceBundle* top,
+                  const UResourceBundle* res, UErrorCode& ec);
+
+    /**
+     * Copy constructor
+     */
+    OlsonTimeZone(const OlsonTimeZone& other);
+
+    /**
+     * Destructor
+     */
+    virtual ~OlsonTimeZone();
+
+    /**
+     * Assignment operator
+     */
+    OlsonTimeZone& operator=(const OlsonTimeZone& other);
+
+    /**
+     * Returns true if the two TimeZone objects are equal.
+     */
+    virtual UBool operator==(const TimeZone& other) const;
+
+    /**
+     * TimeZone API.
+     */
+    virtual TimeZone* clone() const;
+
+    /**
+     * TimeZone API.
+     */
+    static UClassID U_EXPORT2 getStaticClassID();
+
+    /**
+     * TimeZone API.
+     */
+    virtual UClassID getDynamicClassID() const;
+    
+    /**
+     * TimeZone API.  Do not call this; prefer getOffset(UDate,...).
+     */
+    virtual int32_t getOffset(uint8_t era, int32_t year, int32_t month,
+                              int32_t day, uint8_t dayOfWeek,
+                              int32_t millis, UErrorCode& ec) const;
+
+    /**
+     * TimeZone API.  Do not call this; prefer getOffset(UDate,...).
+     */
+    virtual int32_t getOffset(uint8_t era, int32_t year, int32_t month,
+                              int32_t day, uint8_t dayOfWeek,
+                              int32_t millis, int32_t monthLength,
+                              UErrorCode& ec) const;
+
+    /**
+     * TimeZone API.
+     */
+    virtual void getOffset(UDate date, UBool local, int32_t& rawOffset,
+                   int32_t& dstOffset, UErrorCode& ec) const;
+
+    /**
+     * BasicTimeZone API.
+     */
+    virtual void getOffsetFromLocal(UDate date, int32_t nonExistingTimeOpt, int32_t duplicatedTimeOpt,
+        int32_t& rawoff, int32_t& dstoff, UErrorCode& ec) /*const*/;
+
+    /**
+     * TimeZone API.  This method has no effect since objects of this
+     * class are quasi-immutable (the base class allows the ID to be
+     * changed).
+     */
+    virtual void setRawOffset(int32_t offsetMillis);
+
+    /**
+     * TimeZone API.  For a historical zone, the raw offset can change
+     * over time, so this API is not useful.  In order to approximate
+     * expected behavior, this method returns the raw offset for the
+     * current moment in time.
+     */
+    virtual int32_t getRawOffset() const;
+
+    /**
+     * TimeZone API.  For a historical zone, whether DST is used or
+     * not varies over time.  In order to approximate expected
+     * behavior, this method returns TRUE if DST is observed at any
+     * point in the current year.
+     */
+    virtual UBool useDaylightTime() const;
+
+    /**
+     * TimeZone API.
+     */
+    virtual UBool inDaylightTime(UDate date, UErrorCode& ec) const;
+
+    /**
+     * TimeZone API.
+     */
+    virtual int32_t getDSTSavings() const;
+
+    /**
+     * TimeZone API.  Also comare historic transitions.
+     */
+    virtual UBool hasSameRules(const TimeZone& other) const;
+
+    /**
+     * BasicTimeZone API.
+     * Gets the first time zone transition after the base time.
+     * @param base      The base time.
+     * @param inclusive Whether the base time is inclusive or not.
+     * @param result    Receives the first transition after the base time.
+     * @return  TRUE if the transition is found.
+     */
+    virtual UBool getNextTransition(UDate base, UBool inclusive, TimeZoneTransition& result) /*const*/;
+
+    /**
+     * BasicTimeZone API.
+     * Gets the most recent time zone transition before the base time.
+     * @param base      The base time.
+     * @param inclusive Whether the base time is inclusive or not.
+     * @param result    Receives the most recent transition before the base time.
+     * @return  TRUE if the transition is found.
+     */
+    virtual UBool getPreviousTransition(UDate base, UBool inclusive, TimeZoneTransition& result) /*const*/;
+
+    /**
+     * BasicTimeZone API.
+     * Returns the number of <code>TimeZoneRule</code>s which represents time transitions,
+     * for this time zone, that is, all <code>TimeZoneRule</code>s for this time zone except
+     * <code>InitialTimeZoneRule</code>.  The return value range is 0 or any positive value.
+     * @param status    Receives error status code.
+     * @return The number of <code>TimeZoneRule</code>s representing time transitions.
+     */
+    virtual int32_t countTransitionRules(UErrorCode& status) /*const*/;
+
+    /**
+     * Gets the <code>InitialTimeZoneRule</code> and the set of <code>TimeZoneRule</code>
+     * which represent time transitions for this time zone.  On successful return,
+     * the argument initial points to non-NULL <code>InitialTimeZoneRule</code> and
+     * the array trsrules is filled with 0 or multiple <code>TimeZoneRule</code>
+     * instances up to the size specified by trscount.  The results are referencing the
+     * rule instance held by this time zone instance.  Therefore, after this time zone
+     * is destructed, they are no longer available.
+     * @param initial       Receives the initial timezone rule
+     * @param trsrules      Receives the timezone transition rules
+     * @param trscount      On input, specify the size of the array 'transitions' receiving
+     *                      the timezone transition rules.  On output, actual number of
+     *                      rules filled in the array will be set.
+     * @param status        Receives error status code.
+     * @draft ICU 3.8
+     */
+    virtual void getTimeZoneRules(const InitialTimeZoneRule*& initial,
+        const TimeZoneRule* trsrules[], int32_t& trscount, UErrorCode& status) /*const*/;
+
+private:
+    /**
+     * Default constructor.  Creates a time zone with an empty ID and
+     * a fixed GMT offset of zero.
+     */
+    OlsonTimeZone();
+
+private:
+
+    void constructEmpty();
+
+    void getHistoricalOffset(UDate date, UBool local,
+        int32_t NonExistingTimeOpt, int32_t DuplicatedTimeOpt,
+        int32_t& rawoff, int32_t& dstoff) const;
+
+    int16_t transitionCount() const;
+
+    int64_t transitionTimeInSeconds(int16_t transIdx) const;
+    double transitionTime(int16_t transIdx) const;
+
+    /*
+     * Following 3 methods return an offset at the given transition time index.
+     * When the index is negative, return the initial offset.
+     */
+    int32_t zoneOffsetAt(int16_t transIdx) const;
+    int32_t rawOffsetAt(int16_t transIdx) const;
+    int32_t dstOffsetAt(int16_t transIdx) const;
+
+    /*
+     * Following methods return the initial offset.
+     */
+    int32_t initialRawOffset() const;
+    int32_t initialDstOffset() const;
+
+    /**
+     * Number of transitions in each time range
+     */
+    int16_t transitionCountPre32;
+    int16_t transitionCount32;
+    int16_t transitionCountPost32;
+
+    /**
+     * Time of each transition in seconds from 1970 epoch before 32bit second range (<= 1900).
+     * Each transition in this range is represented by a pair of int32_t.
+     * Length is transitionCount int32_t's.  NULL if no transitions in this range.
+     */
+    const int32_t *transitionTimesPre32; // alias into res; do not delete
+
+    /**
+     * Time of each transition in seconds from 1970 epoch in 32bit second range.
+     * Length is transitionCount int32_t's.  NULL if no transitions in this range.
+     */
+    const int32_t *transitionTimes32; // alias into res; do not delete
+
+    /**
+     * Time of each transition in seconds from 1970 epoch after 32bit second range (>= 2038).
+     * Each transition in this range is represented by a pair of int32_t.
+     * Length is transitionCount int32_t's.  NULL if no transitions in this range.
+     */
+    const int32_t *transitionTimesPost32; // alias into res; do not delete
+
+    /**
+     * Number of types, 1..255
+     */
+    int16_t typeCount;
+
+    /**
+     * Offset from GMT in seconds for each type.
+     * Length is typeCount int32_t's.  At least one type (a pair of int32_t)
+     * is required.
+     */
+    const int32_t *typeOffsets; // alias into res; do not delete
+
+    /**
+     * Type description data, consisting of transitionCount uint8_t
+     * type indices (from 0..typeCount-1).
+     * Length is transitionCount int16_t's.  NULL if no transitions.
+     */
+    const uint8_t *typeMapData; // alias into res; do not delete
+
+    /**
+     * A SimpleTimeZone that governs the behavior for date >= finalMillis.
+     */
+    SimpleTimeZone *finalZone; // owned, may be NULL
+
+    /**
+     * For date >= finalMillis, the finalZone will be used.
+     */
+    double finalStartMillis;
+
+    /**
+     * For year >= finalYear, the finalZone will be used.
+     */
+    int32_t finalStartYear;
+
+    /* BasicTimeZone support */
+    void clearTransitionRules(void);
+    void deleteTransitionRules(void);
+    void initTransitionRules(UErrorCode& status);
+
+    InitialTimeZoneRule *initialRule;
+    TimeZoneTransition  *firstTZTransition;
+    int16_t             firstTZTransitionIdx;
+    TimeZoneTransition  *firstFinalTZTransition;
+    TimeArrayTimeZoneRule   **historicRules;
+    int16_t             historicRuleCount;
+    SimpleTimeZone      *finalZoneWithStartYear; // hack
+    UBool               transitionRulesInitialized;
+};
+
+inline int16_t
+OlsonTimeZone::transitionCount() const {
+    return transitionCountPre32 + transitionCount32 + transitionCountPost32;
+}
+
+inline double
+OlsonTimeZone::transitionTime(int16_t transIdx) const {
+    return (double)transitionTimeInSeconds(transIdx) * U_MILLIS_PER_SECOND;
+}
+
+inline int32_t
+OlsonTimeZone::zoneOffsetAt(int16_t transIdx) const {
+    int16_t typeIdx = (transIdx >= 0 ? typeMapData[transIdx] : 0) << 1;
+    return typeOffsets[typeIdx] + typeOffsets[typeIdx + 1];
+}
+
+inline int32_t
+OlsonTimeZone::rawOffsetAt(int16_t transIdx) const {
+    int16_t typeIdx = (transIdx >= 0 ? typeMapData[transIdx] : 0) << 1;
+    return typeOffsets[typeIdx];
+}
+
+inline int32_t
+OlsonTimeZone::dstOffsetAt(int16_t transIdx) const {
+    int16_t typeIdx = (transIdx >= 0 ? typeMapData[transIdx] : 0) << 1;
+    return typeOffsets[typeIdx + 1];
+}
+
+inline int32_t
+OlsonTimeZone::initialRawOffset() const {
+    return typeOffsets[0];
+}
+
+inline int32_t
+OlsonTimeZone::initialDstOffset() const {
+    return typeOffsets[1];
+}
+
+U_NAMESPACE_END
+
+#endif // !UCONFIG_NO_FORMATTING
+#endif // OLSONTZ_H
+
+//eof
Property changes on: icu46/source/i18n/olsontz.h
___________________________________________________________________
Added: svn:eol-style
   + LF