Check in the pristine copy of ICU 4.6...

icu46/source/data/cldr-icu-readme.txt

+# Copyright (C) 2010, International Business Machines Corporation and others.
+# All Rights Reserved.                  
+#
+# Commands for regenerating ICU4C locale data (.txt files) from CLDR.
+#
+# The process requires local copies of
+#    - CLDR (the source of most of the data, and some Java tools)
+#    - ICU4J  (used by the conversion tools)
+#    - ICU4C  (the destination for the new data, and the source for some of it)
+#
+# For an official CLDR data integration into ICU, these should be clean, freshly
+# checked-out. For released CLDR sources, an alternative to checking out sources
+# for a given version is downloading the zipped sources for the common (core.zip)
+# and tools (tools.zip) directory subtrees from the Data column in
+# [http://cldr.unicode.org/index/downloads].
+#
+# The versions of each of these must match. Included with the release notes for
+# ICU is the version number and/or a CLDR svn tag name for the revision of CLDR
+# that was the source of the data for that release of ICU.
+#
+# Note: Some versions of the OpenJDK will not build the CLDR java utilities.
+#   If you see compilation errors complaining about type incompatibilities with
+#   functions on generic classes, try switching to the Sun JDK.
+#
+# Besides a standard JDK, the process also requires ant
+# (http://ant.apache.org/),
+# plus the xml-apis.jar from the Apache xalan package
+# (http://xml.apache.org/xalan-j/downloads.html).
+#
+# Note: Enough things can (and will) fail in this process that it is best to
+#   run the commands separately from an interactive shell. They should all
+#   copy and paste without problems.
+#
+# It is often useful to save logs of the output of many of the steps in this
+# process. The commands below put log files in /tmp; you may want to put them
+# somewhere else.
+#
+#----
+#
+# There are several environment variables that need to be defined.
+#
+# a) Java- and ant-related variables
+#
+# JAVA_HOME:     Path to JDK (a directory, containing e.g. bin/java, bin/javac,
+#                etc.); on many systems this can be set using
+#                `/usr/libexec/java_home`.
+#
+# XML_APIS_JAR:  Complete path to xml-apis.jar (at the end of the path)
+#
+# ANT_OPTS:      Two important options you may want to set:
+#
+#                -Xmx1024m, to give Java more memory; otherwise it may run out
+#                 of heap.
+#
+#                -DCLDR_DTD_CACHE=/tmp/cldrdtd, to set up a temp directory for
+#                 caching the CLDR xml dtd, to speed up data generation.
+#
+# b) CLDR-related variables
+#
+# CLDR_DIR:      Path to root of CLDR sources, below which are the common and
+#                tools directories. Two other variables will be defined based
+#                on this:
+# CLDR_MAIN, CLDR_JAR are defined relative to CLDR_DIR.
+#
+# c) ICU-related variables:
+#
+# ICU4C_DIR:     Path to root of ICU4C sources, below which is the source dir.
+#
+# ICU4J_ROOT:    Path to root of ICU4J sources, below which is the main dir.
+#                Two other variables will be defined based on this:
+# ICU4J_JAR, UTILITIES_JAR are defined relative to ICU4J_ROOT.
+#
+#----
+#
+# If you are adding or removing locales, or specific kinds of locale data,
+# there are some xml files in the ICU sources that need to be updated (these xml
+# files are used in addition to the CLDR files as inputs to the CLDR data build
+# process for ICU):
+#
+#    icu/trunk/source/data/icu-config.xml - Update <locales> to add or remove
+#                CLDR locales for inclusion in ICU. Update <paths> to prefer
+#                alt forms for certain paths, or to exclude certain paths; note
+#                that <paths> items can only have draft or alt attributes.
+#
+#    icu/trunk/source/data/build.xml - If you are adding or removing break
+#                iterators, you need to update  <fileset id="brkitr" ...> under
+#                <target name="clean" ...> to clean the correct set of files.
+#
+#    icu/trunk/source/data/xml/      - If you are adding a new locale, break
+#                iterator, collattion tailoring, or rule-based number formatter,
+#                you need to add a corresponding xml file in (respectively) the
+#                main/, brkitr/, collation/, or rbnf/ subdirectory here.
+#
+#----
+#
+# For an official CLDR data integration into ICU, there are some additional
+# considerations:
+#
+# a) Don't commit anything in ICU sources (and possibly any changes in CLDR
+#    sources, depending on their nature) until you have finished testing and
+#    resolving build issues and test failures for both ICU4C and ICU4J.
+#
+# b) There are version numbers that may need manual updating in CLDR (other
+#    version numbers get updated automatically, based on these):
+#
+#    common/dtd/ldml.dtd                            - update cldrVersion
+#    common/dtd/ldmlBCP47.dtd                       - update cldrVersion
+#    common/dtd/ldmlSupplemental.dtd                - update cldrVersion
+#    tools/java/org/unicode/cldr/util/CLDRFile.java - update GEN_VERSION
+#
+# c) After everything is committed, you will need to tag the CLDR, ICU4J, and
+#    ICU4C sources that ended up being used for the integration; see step 17
+#    below.
+#
+################################################################################
+
+# 1a. Java and ant variables, adjust for your system
+# (here XML_APIS_JAR is set as on Mac OSX).
+
+export JAVA_HOME=`/usr/libexec/java_home`
+export XML_APIS_JAR=/Library/Java/Extensions/xml-apis.jar
+mkdir /tmp/cldrdtd
+export ANT_OPTS="-Xmx1024m -DCLDR_DTD_CACHE=/tmp/cldrdtd"
+
+# 1b. CLDR variables, adjust for your setup; with cygwin it might be e.g.
+# CLDR_DIR=`cygpath -wp /build/cldr`
+
+export CLDR_DIR=$HOME/cldr/trunk
+export CLDR_MAIN=$CLDR_DIR/common/main
+export CLDR_JAR=$CLDR_DIR/tools/java/cldr.jar
+#export CLDR_CLASSES=$CLDR_DIR/tools/java/classes
+
+# 1c. ICU variables
+
+export ICU4C_DIR=$HOME/icu/icu/trunk
+export ICU4J_ROOT=$HOME/icu/icu4j/trunk
+export ICU4J_JAR=$ICU4J_ROOT/icu4j.jar
+export UTILITIES_JAR=$ICU4J_ROOT/out/cldr_util/lib/utilities.jar
+#export ICU4J_CLASSES=$ICU4J_ROOT/out/cldr_util/bin
+
+# 2. Build ICU4J, including the cldr utilities.
+
+cd $ICU4J_ROOT
+ant clean all jar cldrUtil
+
+# 3. Build the CLDR Java tools
+
+cd $CLDR_DIR/tools/java
+ant jar
+
+# 4. Configure ICU4C, build and test without new data first, to verify that
+# there are no pre-existing errors (configure shown here for MacOSX, adjust
+# for your platform).
+
+cd $ICU4C_DIR/source
+./runConfigureICU MacOSX
+make all 2>&1 | tee /tmp/icu4c-oldData-makeAll.txt
+make check 2>&1 | tee /tmp/icu4c-oldData-makeCheck.txt
+
+# 5. Build the new ICU4C data files; these include .txt files and .mk files.
+# These new files will replace whatever was already present in the ICU4C sources.
+# This process uses ant with ICU's data/build.xml and data/icu-config.xml to
+# operate (via CLDR's ant/CLDRConverterTool.java and ant/CLDRBuild.java) the
+# necessary CLDR tools including LDML2ICUConverter, ConvertTransforms, etc.
+# This process will take several minutes (CLDR_DTD_CACHE helps reduce this).
+# Keep a log so you can investigate anything that looks suspicious.
+
+cd $ICU4C_DIR/source/data
+ant clean
+ant all 2>&1 | tee /tmp/cldrNN-buildLog.txt
+
+# 6. Check which data files have modifications, which have been added or removed
+# (if there are no changes, you may not need to proceed further). Make sure the
+# list seems reasonable.
+
+svn status
+
+# 7. Fix any errors, investigate any warnings. Some warnings are expected,
+# including  warnings for missing versions in locale names which specify some
+# collationvariants, e.g.
+#   [cldr-build] WARNING (ja_JP_TRADITIONAL): No version #??
+#   [cldr-build] WARNING (zh_TW_STROKE): No version #??
+# and warnings for some empty collation bundles, e.g.
+#   [cldr-build] WARNING (en):  warning: No collations found. Bundle will ...
+#   [cldr-build] WARNING (to):  warning: No collations found. Bundle will ...
+#
+# Fixing may entail modifying CLDR source data or tools - for example,
+# updating the validSubLocales for collation data (file a bug f appropriate).
+# Repeat steps 5-7 until there are no build errors and no unexpected
+# warnings.
+
+# 8. Now rebuild ICU4C with the new data and run make check tests.
+# Again, keep a log so you can investigate the errors.
+
+cd $ICU4C_DIR/source
+make check 2>&1 | tee /tmp/icu4c-newData-makeCheck.txt
+
+# 9. Investigate each test case failure. The first run processing new CLDR data
+# from the Survey Tool can result in thousands of failures (in many cases, one
+# CLDR data fix can resolve hundres of test failures). If the error is caused
+# by bad CLDR data, then file a CLDR bug, fix the data, and regenerate from
+# step 5a. If the data is OK but the testcase needs to be updated because the
+# data has legitimately changed, then update the testcase. You will check in
+# the updated testcases along with the new ICU data at the end of this process.
+# Repeat steps 5-8 until there are no errors.
+
+# 10. Now run the make check tests in exhaustive mode:
+
+cd $ICU4C_DIR/source
+export INTLTEST_OPTS="-e"
+export CINTLTST_OPTS="-e"
+make check 2>&1 | tee /tmp/icu4c-newData-makeCheckEx.txt
+
+# 11. Again, investigate each failure, fixing CLDR data or ICU test cases as
+# appropriate, and repeating steps 5-7 and 10 until there are no errors.
+
+# 12. Now with ICU4J, build and test without new data first, to verify that
+# there are no pre-existing errors (or at least to have the pre-existing errors
+# as a base for comparison):
+
+cd $ICU4J_ROOT
+ant all 2>&1 | tee /tmp/icu4j-oldData-antAll.txt
+ant check 2>&1 | tee /tmp/icu4j-oldData-antCheck.txt
+
+# 13. Now build the new data for ICU4J
+
+cd $ICU4C_DIR/source/data
+make icu4j-data-install
+
+# 14. Now rebuild ICU4J with the new data and run tests:
+# Keep a log so you can investigate the errors.
+
+cd $ICU4J_ROOT
+ant check 2>&1 | tee /tmp/icu4j-newData-antCheck.txt
+
+# 15. Investigate test case failures; fix test cases and repeat from step 14,
+# or fix CLDR data and repeat from step 5, as appropriate, unitl; there are no
+# more failures in ICU4C or ICU4J (except failures that were present before you
+# began testing the new CLDR data).
+
+# 16. Check the file changes; then svn add or svn remove as necessary, and
+# commit the changes.
+
+cd $ICU4C_DIR/source/
+svn status
+# add or remove as necessary, then commit
+
+cd $ICU4J_ROOT
+svn status
+# add or remove as necessary, then commit
+
+# 17. For an official CLDR data integration into ICU, now tag the CLDR, ICU4J,
+# and ICU4C sources with an appropriate CLDR milestone (you can check previous
+# tags for format), e.g.:
+
+svn copy svn+ssh://unicode.org/repos/cldr/trunk \
+svn+ssh://unicode.org/repos/cldr/tags/release-NNN \
+--parents -m "cldrbug nnnn: tag cldr sources for NNN"
+
+svn copy svn+ssh://source.icu-project.org/repos/icu/icu4j/trunk \
+svn+ssh://source.icu-project.org/repos/icu/icu4j/tags/cldr-NNN \
+--parents -m 'ticket:mmmm: tag the version used for integrating CLDR NNN'
+
+svn copy svn+ssh://source.icu-project.org/repos/icu/icu/trunk \
+svn+ssh://source.icu-project.org/repos/icu/icu/tags/cldr-NNN \
+--parents -m 'ticket:mmmm: tag the version used for integrating CLDR NNN'
+