Add ExceptionPorts and its test

util/mach/exception_ports.h

+// Copyright 2014 The Crashpad Authors. All rights reserved.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#ifndef CRASHPAD_UTIL_MACH_EXCEPTION_PORTS_H_
+#define CRASHPAD_UTIL_MACH_EXCEPTION_PORTS_H_
+
+#include <mach/mach.h>
+
+#include <vector>
+
+#include "base/basictypes.h"
+
+namespace crashpad {
+
+//! \brief A better interface to `*_get_exception_ports()` and
+//!     `*_set_exception_ports()`.
+//!
+//! The same generic interface can be used to operate on host, task, and thread
+//! exception ports. The “get” interface is superior to the system’s native
+//! interface because it keeps related data about a single exception handler
+//! together in one struct, rather than separating it into four parallel arrays.
+class ExceptionPorts {
+ public:
+  //! \brief Various entities which can have their own exception ports set.
+  enum TargetType {
+    //! \brief The host exception target.
+    //!
+    //! `host_get_exception_ports()` and `host_set_exception_ports()` will be
+    //! used. If no target port is explicitly provided, `mach_host_self()` will
+    //! be used as the target port. `mach_host_self()` is the only target port
+    //! for this type that is expected to function properly.
+    //!
+    //! \note Operations on this target type are not expected to succeed as
+    //!     non-root, because `mach_host_self()` doesn’t return the privileged
+    //!     `host_priv` port to non-root users, and this is the target port
+    //!     that’s required for `host_get_exception_ports()` and
+    //!     `host_set_exception_ports()`.
+    kTargetTypeHost = 0,
+
+    //! \brief A task exception target.
+    //!
+    //! `task_get_exception_ports()` and `task_set_exception_ports()` will be
+    //! used. If no target port is explicitly provided, `mach_task_self()` will
+    //! be used as the target port.
+    kTargetTypeTask,
+
+    //! \brief A thread exception target.
+    //!
+    //! `thread_get_exception_ports()` and `thread_set_exception_ports()` will
+    //! be used. If no target port is explicitly provided, `mach_thread_self()`
+    //! will be used as the target port.
+    kTargetTypeThread,
+  };
+
+  //! \brief Information about a registered exception handler.
+  struct ExceptionHandler {
+    //! \brief A mask specifying the exception types to direct to \a port,
+    //!     containing `EXC_MASK_*` values.
+    exception_mask_t mask;
+
+    //! \brief A send right to a Mach port that will handle exceptions of the
+    //!     types indicated in \a mask.
+    exception_handler_t port;
+
+    //! \brief The “behavior” that the exception handler at \a port implements:
+    //!     `EXCEPTION_DEFAULT`, `EXCEPTION_STATE`, or
+    //!     `EXCEPTION_STATE_IDENTITY`, possibly combined with
+    //!     `MACH_EXCEPTION_CODES`.
+    exception_behavior_t behavior;
+
+    //! \brief The thread state flavor that the exception handler at \a port
+    //!     will receive and possibly modify. This member has no effect for \a
+    //!     \a behavior values that indicate a “default” behavior.
+    thread_state_flavor_t flavor;
+  };
+
+  //! \brief Constructs an interface object to get or set exception ports on a
+  //!     host, task, or thread port.
+  //!
+  //! \param[in] target_type The type of target on which the exception ports are
+  //!     to be get or set: #kTargetTypeHost, #kTargetTypeTask, or or
+  //!     #kTargetTypeThread. The correct functions for
+  //!     `*_get_exception_ports()` and `*_set_exception_ports()` will be used.
+  //! \param[in] target_port The target on which to call
+  //!     `*_get_exception_ports()` or `*_set_exception_ports()`. The target

[Robert Sesek, 2014/09/16 17:38:09]

Does this pass ownership?

+  //!     port must be a send right to a port of the type specified in \a
+  //!     target_type. \a target_port may also be `MACH_PORT_NULL`, in which
+  //!     case `mach_host_self()`, `mach_task_self()`, or `mach_thread_self()`
+  //!     will be used as the target port depending on the value of \a
+  //!     target_type.
+  ExceptionPorts(TargetType target_type, mach_port_t target_port);
+
+  ~ExceptionPorts();
+
+  //! \brief Calls `*_get_exception_ports()` on the target.
+  //!
+  //! \param[in] mask The exception mask, containing the `EXC_MASK_*` values to
+  //!     be looked up and returned in \a handlers.
+  //! \param[out] handlers The exception handlers registered for \a target_port
+  //!     to handle exceptions indicated in \a mask. On failure, this argument
+  //!     is untouched.
+  //!
+  //! \return The return value of `*_get_exception_ports()`.
+  kern_return_t GetExceptionPorts(
+      exception_mask_t mask,
+      std::vector<ExceptionHandler>* handlers) const;
+
+  //! \brief Calls `*_set_exception_ports()` on the target.
+  //!
+  //! \param[in] mask A mask specifying the exception types to direct to \a
+  //!     port, containing `EXC_MASK_*` values.
+  //! \param[in] port A send right to a Mach port that will handle exceptions

[Robert Sesek, 2014/09/16 17:38:09]

Is the right consumed?

+  //!     sustained by \a target_port of the types indicated in \a mask.
+  //! \param[in] behavior The “behavior” that the exception handler at \a port
+  //!     implements: `EXCEPTION_DEFAULT`, `EXCEPTION_STATE`, or
+  //!     `EXCEPTION_STATE_IDENTITY`, possibly combined with
+  //!     `MACH_EXCEPTION_CODES`.
+  //! \param[in] flavor The thread state flavor that the exception handler at \a
+  //!     port expects to receive and possibly modify. This argument has no
+  //!     effect for \a behavior values that indicate a “default” behavior.
+  //!
+  //! \return The return value of `*_set_exception_ports()`.
+  kern_return_t SetExceptionPort(exception_mask_t mask,
+                                 exception_handler_t port,
+                                 exception_behavior_t behavior,
+                                 thread_state_flavor_t flavor) const;
+
+  //! \brief Returns a string identifying the target type.
+  //!
+  //! \return `"host"`, `"task"`, or `"thread"`, as appropriate.
+  const char* TargetTypeName() const;
+
+ private:
+  typedef kern_return_t (*GetExceptionPortsType)(mach_port_t,
+                                                 exception_mask_t,
+                                                 exception_mask_array_t,
+                                                 mach_msg_type_number_t*,
+                                                 exception_handler_array_t,
+                                                 exception_behavior_array_t,
+                                                 exception_flavor_array_t);
+
+  typedef kern_return_t (*SetExceptionPortsType)(mach_port_t,
+                                                 exception_mask_t,
+                                                 exception_handler_t,
+                                                 exception_behavior_t,
+                                                 thread_state_flavor_t);
+
+  GetExceptionPortsType get_exception_ports_;
+  SetExceptionPortsType set_exception_ports_;
+  const char* target_name_;
+  mach_port_t target_port_;
+
+  // If true, target_port_ will be deallocated in the destructor. This will
+  // always be false when the user provides a non-MACH_PORT_NULL target_port to
+  // the constructor. It will also be false when target_type is kTargetTypeTask,
+  // even with a MACH_PORT_NULL target_port, because it is incorrect to
+  // deallocate the result of mach_task_self().
+  bool dealloc_target_port_;
+
+  DISALLOW_COPY_AND_ASSIGN(ExceptionPorts);
+};
+
+}  // namespace crashpad
+
+#endif  // CRASHPAD_UTIL_MACH_EXCEPTION_PORTS_H_