Add separate scanner only intended for preparsing.

src/prescanner.h

Index: src/prescanner.h
diff --git a/src/prescanner.h b/src/prescanner.h
new file mode 100644
index 0000000000000000000000000000000000000000..7fb8aa5b1dac6ceed038fecbb7f6065d5e902b26
--- /dev/null
+++ b/src/prescanner.h
@@ -0,0 +1,1098 @@
+// Copyright 2010 the V8 project authors. All rights reserved.
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+//     * Redistributions of source code must retain the above copyright
+//       notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+//       copyright notice, this list of conditions and the following
+//       disclaimer in the documentation and/or other materials provided
+//       with the distribution.
+//     * Neither the name of Google Inc. nor the names of its
+//       contributors may be used to endorse or promote products derived
+//       from this software without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+#ifndef V8_PRESCANNER_H_
+#define V8_PRESCANNER_H_
+
+#include "token.h"
+#include "char-predicates-inl.h"
+#include "utils.h"
+#include "scanner-base.h"
+
+namespace v8 {
+namespace preparser {
+
+namespace i = v8::internal;
+
+typedef int uc32;
+
+int HexValue(uc32 c) {
+  int res = c | 0x20;  // Uppercase letters.
+  int is_digit = (c & 0x10) >> 4;  // 0 if non-digit, 1 if digit.
+  // What to add to digits to make them consecutive with 'a'-'f' letters.
+  int kDelta = 'a' - '9' - 1;
+  // What to subtract to digits and letters to get them back to the range 0..15.
+  int kStart = '0' + kDelta;
+  res -= kStart;
+  res += kDelta * is_digit;
+  return res;
+}
+
+
+class PreScannerStackGuard {
+ public:
+  explicit PreScannerStackGuard(int max_size)
+      : limit_(StackPoint().at() - max_size) { }
+  bool has_overflowed() {
+    return StackPoint().at() < limit_;
+  }
+ private:
+  class StackPoint {
+   public:
+    char* at() { return reinterpret_cast<char*>(this); }
+  };
+  char* limit_;
+};
+
+
+// Scanner for preparsing.
+// InputStream is a source of UC16 characters with limited push-back.
+// LiteralsBuffer is a collector of (UTF-8) characters used to capture literals.
+template <typename InputStream, typename LiteralsBuffer>
+class Scanner {
+ public:
+  enum LiteralType {
+    kLiteralNumber,
+    kLiteralIdentifier,
+    kLiteralString,
+    kLiteralRegExp,
+    kLiteralRegExpFlags
+  };
+
+  class LiteralScope {
+   public:
+    explicit LiteralScope(Scanner* self, LiteralType type);
+    ~LiteralScope();
+    void Complete();
+
+   private:
+    Scanner* scanner_;
+    bool complete_;
+  };
+
+  Scanner();
+
+  void Initialize(InputStream* stream);
+
+  // Returns the next token.
+  i::Token::Value Next();
+
+  // Returns the current token again.
+  i::Token::Value current_token() { return current_.token; }
+
+  // One token look-ahead (past the token returned by Next()).
+  i::Token::Value peek() const { return next_.token; }
+
+  // Returns true if there was a line terminator before the peek'ed token.
+  bool has_line_terminator_before_next() const {
+    return has_line_terminator_before_next_;
+  }
+
+  struct Location {
+    Location(int b, int e) : beg_pos(b), end_pos(e) { }
+    Location() : beg_pos(0), end_pos(0) { }
+    int beg_pos;
+    int end_pos;
+  };
+
+  // Returns the location information for the current token
+  // (the token returned by Next()).
+  Location location() const { return current_.location; }
+  // Returns the location information for the look-ahead token
+  // (the token returned by peek()).
+  Location peek_location() const { return next_.location; }
+
+  // Returns the literal string, if any, for the current token (the
+  // token returned by Next()). The string is 0-terminated and in
+  // UTF-8 format; they may contain 0-characters. Literal strings are
+  // collected for identifiers, strings, and numbers.
+  // These functions only give the correct result if the literal
+  // was scanned between calls to StartLiteral() and TerminateLiteral().
+  const char* literal_string() const {
+    return current_.literal_chars;
+  }
+
+  int literal_length() const {
+    // Excluding terminal '\x00' added by TerminateLiteral().
+    return current_.literal_length - 1;
+  }
+
+  i::Vector<const char> literal() const {
+    return i::Vector<const char>(literal_string(), literal_length());
+  }
+
+  // Returns the literal string for the next token (the token that
+  // would be returned if Next() were called).
+  const char* next_literal_string() const {
+    return next_.literal_chars;
+  }
+
+
+  // Returns the length of the next token (that would be returned if
+  // Next() were called).
+  int next_literal_length() const {
+    // Excluding terminal '\x00' added by TerminateLiteral().
+    return next_.literal_length - 1;
+  }
+
+  i::Vector<const char> next_literal() const {
+    return i::Vector<const char>(next_literal_string(), next_literal_length());
+  }
+
+  // Scans the input as a regular expression pattern, previous
+  // character(s) must be /(=). Returns true if a pattern is scanned.
+  bool ScanRegExpPattern(bool seen_equal);
+  // Returns true if regexp flags are scanned (always since flags can
+  // be empty).
+  bool ScanRegExpFlags();
+
+  // Seek forward to the given position.  This operation does not
+  // work in general, for instance when there are pushed back
+  // characters, but works for seeking forward until simple delimiter
+  // tokens, which is what it is used for.
+  void SeekForward(int pos);
+
+  bool stack_overflow() { return stack_overflow_; }
+
+  static const int kCharacterLookaheadBufferSize = 1;
+  static const int kNoEndPosition = 1;
+
+ private:
+  // The current and look-ahead token.
+  struct TokenDesc {
+    i::Token::Value token;
+    Location location;
+    const char* literal_chars;
+    int literal_length;
+  };
+
+  // Default stack limit is 128K pointers.
+  static const int kMaxStackSize = 128 * 1024 * sizeof(void*);  // NOLINT.
+
+  void Init(unibrow::CharacterStream* stream);
+
+  // Literal buffer support
+  inline void StartLiteral(LiteralType type);
+  inline void AddLiteralChar(uc32 ch);
+  inline void AddLiteralCharAdvance();
+  inline void TerminateLiteral();
+  // Stops scanning of a literal, e.g., due to an encountered error.
+  inline void DropLiteral();
+
+  // Low-level scanning support.
+  void Advance() { c0_ = source_->Advance(); }
+  void PushBack(uc32 ch) {
+    source_->PushBack(ch);
+    c0_ = ch;
+  }
+
+  bool SkipWhiteSpace();
+
+  i::Token::Value SkipSingleLineComment();
+  i::Token::Value SkipMultiLineComment();
+
+  inline i::Token::Value Select(i::Token::Value tok);
+  inline i::Token::Value Select(uc32 next,
+                                i::Token::Value then,
+                                i::Token::Value else_);
+
+  // Scans a single JavaScript token.
+  void Scan();
+
+  void ScanDecimalDigits();
+  i::Token::Value ScanNumber(bool seen_period);
+  i::Token::Value ScanIdentifier();
+  uc32 ScanHexEscape(uc32 c, int length);
+  uc32 ScanOctalEscape(uc32 c, int length);
+  void ScanEscape();
+  i::Token::Value ScanString();
+
+  // Scans a possible HTML comment -- begins with '<!'.
+  i::Token::Value ScanHtmlComment();
+
+  // Return the current source position.
+  int source_pos() {
+    return source_->pos() - kCharacterLookaheadBufferSize;
+  }
+
+  // Decodes a unicode escape-sequence which is part of an identifier.
+  // If the escape sequence cannot be decoded the result is kBadRune.
+  uc32 ScanIdentifierUnicodeEscape();
+
+  PreScannerStackGuard stack_guard_;
+
+  TokenDesc current_;  // desc for current token (as returned by Next())
+  TokenDesc next_;     // desc for next token (one token look-ahead)
+  bool has_line_terminator_before_next_;
+
+  // Source.
+  InputStream* source_;
+
+  // Buffer to hold literal values (identifiers, strings, numerals, regexps and
+  // regexp flags) using '\x00'-terminated UTF-8 encoding.
+  // Handles allocation internally.
+  // Notice that the '\x00' termination is meaningless for strings and regexps
+  // which may contain the zero-character, but can be used as terminator for
+  // identifiers, numerals and regexp flags.
+  LiteralsBuffer literal_buffer_;
+
+  bool stack_overflow_;
+
+  // One Unicode character look-ahead; c0_ < 0 at the end of the input.
+  uc32 c0_;
+};
+
+
+// ----------------------------------------------------------------------------
+// Scanner::LiteralScope
+
+template <typename InputStream, typename LiteralsBuffer>
+Scanner<InputStream, LiteralsBuffer>::LiteralScope::LiteralScope(
+    Scanner* self, LiteralType type)
+    : scanner_(self), complete_(false) {
+  self->StartLiteral(type);
+}
+
+
+template <typename InputStream, typename LiteralsBuffer>
+Scanner<InputStream, LiteralsBuffer>::LiteralScope::~LiteralScope() {
+  if (!complete_) scanner_->DropLiteral();
+}
+
+template <typename InputStream, typename LiteralsBuffer>
+void Scanner<InputStream, LiteralsBuffer>::LiteralScope::Complete() {
+  scanner_->TerminateLiteral();
+  complete_ = true;
+}
+
+
+// ----------------------------------------------------------------------------
+// Scanner.
+template <typename InputStream, typename LiteralsBuffer>
+Scanner<InputStream, LiteralsBuffer>::Scanner()
+    : stack_guard_(kMaxStackSize),
+      has_line_terminator_before_next_(false),
+      source_(NULL),
+      stack_overflow_(false) {}
+
+
+template <typename InputStream, typename LiteralsBuffer>
+void Scanner<InputStream, LiteralsBuffer>::Initialize(InputStream* stream) {
+  source_ = stream;
+
+  // Initialize current_ to not refer to a literal.
+  current_.literal_length = 0;
+  // Reset literal buffer.
+  literal_buffer_.Reset();
+
+  // Set c0_ (one character ahead)
+  ASSERT(kCharacterLookaheadBufferSize == 1);
+  Advance();
+
+  // Skip initial whitespace allowing HTML comment ends just like
+  // after a newline and scan first token.
+  has_line_terminator_before_next_ = true;
+  SkipWhiteSpace();
+  Scan();
+}
+
+
+template <typename InputStream, typename LiteralsBuffer>
+i::Token::Value Scanner<InputStream, LiteralsBuffer>::Next() {
+  // BUG 1215673: Find a thread safe way to set a stack limit in
+  // pre-parse mode. Otherwise, we cannot safely pre-parse from other
+  // threads.
+  current_ = next_;
+  // Check for stack-overflow before returning any tokens.
+  if (stack_guard_.has_overflowed()) {
+    stack_overflow_ = true;
+    next_.token = i::Token::ILLEGAL;
+  } else {
+    has_line_terminator_before_next_ = false;
+    Scan();
+  }
+  return current_.token;
+}
+
+
+template <typename InputStream, typename LiteralsBuffer>
+void Scanner<InputStream, LiteralsBuffer>::StartLiteral(LiteralType type) {
+  // Only record string and literal identifiers when preparsing.
+  // Those are the ones that are recorded as symbols. Numbers and
+  // regexps are not recorded.
+  if (type == kLiteralString || type == kLiteralIdentifier) {
+    literal_buffer_.StartLiteral();
+  }
+}
+
+
+template <typename InputStream, typename LiteralsBuffer>
+void Scanner<InputStream, LiteralsBuffer>::AddLiteralChar(uc32 c) {
+  literal_buffer_.AddChar(c);
+}
+
+
+template <typename InputStream, typename LiteralsBuffer>
+void Scanner<InputStream, LiteralsBuffer>::TerminateLiteral() {
+  i::Vector<const char> chars = literal_buffer_.EndLiteral();
+  next_.literal_chars = chars.start();
+  next_.literal_length = chars.length();
+}
+
+
+template <typename InputStream, typename LiteralsBuffer>
+void Scanner<InputStream, LiteralsBuffer>::DropLiteral() {
+  literal_buffer_.DropLiteral();
+}
+
+
+template <typename InputStream, typename LiteralsBuffer>
+void Scanner<InputStream, LiteralsBuffer>::AddLiteralCharAdvance() {
+  AddLiteralChar(c0_);
+  Advance();
+}
+
+
+static inline bool IsByteOrderMark(uc32 c) {
+  // The Unicode value U+FFFE is guaranteed never to be assigned as a
+  // Unicode character; this implies that in a Unicode context the
+  // 0xFF, 0xFE byte pattern can only be interpreted as the U+FEFF
+  // character expressed in little-endian byte order (since it could
+  // not be a U+FFFE character expressed in big-endian byte
+  // order). Nevertheless, we check for it to be compatible with
+  // Spidermonkey.
+  return c == 0xFEFF || c == 0xFFFE;
+}
+
+
+template <typename InputStream, typename LiteralsBuffer>
+bool Scanner<InputStream, LiteralsBuffer>::SkipWhiteSpace() {
+  int start_position = source_pos();
+
+  while (true) {
+    // We treat byte-order marks (BOMs) as whitespace for better
+    // compatibility with Spidermonkey and other JavaScript engines.
+    while (i::ScannerConstants::kIsWhiteSpace.get(c0_)
+           || IsByteOrderMark(c0_)) {
+      // IsWhiteSpace() includes line terminators!
+      if (i::ScannerConstants::kIsLineTerminator.get(c0_)) {
+        // Ignore line terminators, but remember them. This is necessary
+        // for automatic semicolon insertion.
+        has_line_terminator_before_next_ = true;
+      }
+      Advance();
+    }
+
+    // If there is an HTML comment end '-->' at the beginning of a
+    // line (with only whitespace in front of it), we treat the rest
+    // of the line as a comment. This is in line with the way
+    // SpiderMonkey handles it.
+    if (c0_ == '-' && has_line_terminator_before_next_) {
+      Advance();
+      if (c0_ == '-') {
+        Advance();
+        if (c0_ == '>') {
+          // Treat the rest of the line as a comment.
+          SkipSingleLineComment();
+          // Continue skipping white space after the comment.
+          continue;
+        }
+        PushBack('-');  // undo Advance()
+      }
+      PushBack('-');  // undo Advance()
+    }
+    // Return whether or not we skipped any characters.
+    return source_pos() != start_position;
+  }
+}
+
+
+template <typename InputStream, typename LiteralsBuffer>
+i::Token::Value Scanner<InputStream, LiteralsBuffer>::SkipSingleLineComment() {
+  Advance();
+
+  // The line terminator at the end of the line is not considered
+  // to be part of the single-line comment; it is recognized
+  // separately by the lexical grammar and becomes part of the
+  // stream of input elements for the syntactic grammar (see
+  // ECMA-262, section 7.4, page 12).
+  while (c0_ >= 0 && !i::ScannerConstants::kIsLineTerminator.get(c0_)) {
+    Advance();
+  }
+
+  return i::Token::WHITESPACE;
+}
+
+
+template <typename InputStream, typename LiteralsBuffer>
+i::Token::Value Scanner<InputStream, LiteralsBuffer>::SkipMultiLineComment() {
+  ASSERT(c0_ == '*');
+  Advance();
+
+  while (c0_ >= 0) {
+    char ch = c0_;
+    Advance();
+    // If we have reached the end of the multi-line comment, we
+    // consume the '/' and insert a whitespace. This way all
+    // multi-line comments are treated as whitespace - even the ones
+    // containing line terminators. This contradicts ECMA-262, section
+    // 7.4, page 12, that says that multi-line comments containing
+    // line terminators should be treated as a line terminator, but it
+    // matches the behaviour of SpiderMonkey and KJS.
+    if (ch == '*' && c0_ == '/') {
+      c0_ = ' ';
+      return i::Token::WHITESPACE;
+    }
+  }
+
+  // Unterminated multi-line comment.
+  return i::Token::ILLEGAL;
+}
+
+
+template <typename InputStream, typename LiteralsBuffer>
+i::Token::Value Scanner<InputStream, LiteralsBuffer>::ScanHtmlComment() {
+  // Check for <!-- comments.
+  ASSERT(c0_ == '!');
+  Advance();
+  if (c0_ == '-') {
+    Advance();
+    if (c0_ == '-') return SkipSingleLineComment();
+    PushBack('-');  // undo Advance()
+  }
+  PushBack('!');  // undo Advance()
+  ASSERT(c0_ == '!');
+  return i::Token::LT;
+}
+
+
+template <typename InputStream, typename LiteralsBuffer>
+void Scanner<InputStream, LiteralsBuffer>::Scan() {
+  next_.literal_length = 0;
+  i::Token::Value token;
+  do {
+    // Remember the position of the next token
+    next_.location.beg_pos = source_pos();
+
+    switch (c0_) {
+      case ' ':
+      case '\t':
+        Advance();
+        token = i::Token::WHITESPACE;
+        break;
+
+      case '\n':
+        Advance();
+        has_line_terminator_before_next_ = true;
+        token = i::Token::WHITESPACE;
+        break;
+
+      case '"': case '\'':
+        token = ScanString();
+        break;
+
+      case '<':
+        // < <= << <<= <!--
+        Advance();
+        if (c0_ == '=') {
+          token = Select(i::Token::LTE);
+        } else if (c0_ == '<') {
+          token = Select('=', i::Token::ASSIGN_SHL, i::Token::SHL);
+        } else if (c0_ == '!') {
+          token = ScanHtmlComment();
+        } else {
+          token = i::Token::LT;
+        }
+        break;
+
+      case '>':
+        // > >= >> >>= >>> >>>=
+        Advance();
+        if (c0_ == '=') {
+          token = Select(i::Token::GTE);
+        } else if (c0_ == '>') {
+          // >> >>= >>> >>>=
+          Advance();
+          if (c0_ == '=') {
+            token = Select(i::Token::ASSIGN_SAR);
+          } else if (c0_ == '>') {
+            token = Select('=', i::Token::ASSIGN_SHR, i::Token::SHR);
+          } else {
+            token = i::Token::SAR;
+          }
+        } else {
+          token = i::Token::GT;
+        }
+        break;
+
+      case '=':
+        // = == ===
+        Advance();
+        if (c0_ == '=') {
+          token = Select('=', i::Token::EQ_STRICT, i::Token::EQ);
+        } else {
+          token = i::Token::ASSIGN;
+        }
+        break;
+
+      case '!':
+        // ! != !==
+        Advance();
+        if (c0_ == '=') {
+          token = Select('=', i::Token::NE_STRICT, i::Token::NE);
+        } else {
+          token = i::Token::NOT;
+        }
+        break;
+
+      case '+':
+        // + ++ +=
+        Advance();
+        if (c0_ == '+') {
+          token = Select(i::Token::INC);
+        } else if (c0_ == '=') {
+          token = Select(i::Token::ASSIGN_ADD);
+        } else {
+          token = i::Token::ADD;
+        }
+        break;
+
+      case '-':
+        // - -- --> -=
+        Advance();
+        if (c0_ == '-') {
+          Advance();
+          if (c0_ == '>' && has_line_terminator_before_next_) {
+            // For compatibility with SpiderMonkey, we skip lines that
+            // start with an HTML comment end '-->'.
+            token = SkipSingleLineComment();
+          } else {
+            token = i::Token::DEC;
+          }
+        } else if (c0_ == '=') {
+          token = Select(i::Token::ASSIGN_SUB);
+        } else {
+          token = i::Token::SUB;
+        }
+        break;
+
+      case '*':
+        // * *=
+        token = Select('=', i::Token::ASSIGN_MUL, i::Token::MUL);
+        break;
+
+      case '%':
+        // % %=
+        token = Select('=', i::Token::ASSIGN_MOD, i::Token::MOD);
+        break;
+
+      case '/':
+        // /  // /* /=
+        Advance();
+        if (c0_ == '/') {
+          token = SkipSingleLineComment();
+        } else if (c0_ == '*') {
+          token = SkipMultiLineComment();
+        } else if (c0_ == '=') {
+          token = Select(i::Token::ASSIGN_DIV);
+        } else {
+          token = i::Token::DIV;
+        }
+        break;
+
+      case '&':
+        // & && &=
+        Advance();
+        if (c0_ == '&') {
+          token = Select(i::Token::AND);
+        } else if (c0_ == '=') {
+          token = Select(i::Token::ASSIGN_BIT_AND);
+        } else {
+          token = i::Token::BIT_AND;
+        }
+        break;
+
+      case '|':
+        // | || |=
+        Advance();
+        if (c0_ == '|') {
+          token = Select(i::Token::OR);
+        } else if (c0_ == '=') {
+          token = Select(i::Token::ASSIGN_BIT_OR);
+        } else {
+          token = i::Token::BIT_OR;
+        }
+        break;
+
+      case '^':
+        // ^ ^=
+        token = Select('=', i::Token::ASSIGN_BIT_XOR, i::Token::BIT_XOR);
+        break;
+
+      case '.':
+        // . Number
+        Advance();
+        if (i::IsDecimalDigit(c0_)) {
+          token = ScanNumber(true);
+        } else {
+          token = i::Token::PERIOD;
+        }
+        break;
+
+      case ':':
+        token = Select(i::Token::COLON);
+        break;
+
+      case ';':
+        token = Select(i::Token::SEMICOLON);
+        break;
+
+      case ',':
+        token = Select(i::Token::COMMA);
+        break;
+
+      case '(':
+        token = Select(i::Token::LPAREN);
+        break;
+
+      case ')':
+        token = Select(i::Token::RPAREN);
+        break;
+
+      case '[':
+        token = Select(i::Token::LBRACK);
+        break;
+
+      case ']':
+        token = Select(i::Token::RBRACK);
+        break;
+
+      case '{':
+        token = Select(i::Token::LBRACE);
+        break;
+
+      case '}':
+        token = Select(i::Token::RBRACE);
+        break;
+
+      case '?':
+        token = Select(i::Token::CONDITIONAL);
+        break;
+
+      case '~':
+        token = Select(i::Token::BIT_NOT);
+        break;
+
+      default:
+        if (i::ScannerConstants::kIsIdentifierStart.get(c0_)) {
+          token = ScanIdentifier();
+        } else if (i::IsDecimalDigit(c0_)) {
+          token = ScanNumber(false);
+        } else if (SkipWhiteSpace()) {
+          token = i::Token::WHITESPACE;
+        } else if (c0_ < 0) {
+          token = i::Token::EOS;
+        } else {
+          token = Select(i::Token::ILLEGAL);
+        }
+        break;
+    }
+
+    // Continue scanning for tokens as long as we're just skipping
+    // whitespace.
+  } while (token == i::Token::WHITESPACE);
+
+  next_.location.end_pos = source_pos();
+  next_.token = token;
+}
+
+
+template <typename InputStream, typename LiteralsBuffer>
+void Scanner<InputStream, LiteralsBuffer>::SeekForward(int pos) {
+  source_->SeekForward(pos - 1);
+  Advance();
+  // This function is only called to seek to the location
+  // of the end of a function (at the "}" token). It doesn't matter
+  // whether there was a line terminator in the part we skip.
+  has_line_terminator_before_next_ = false;
+  Scan();
+}
+
+
+template <typename InputStream, typename LiteralsBuffer>
+uc32 Scanner<InputStream, LiteralsBuffer>::ScanHexEscape(uc32 c, int length) {
+  ASSERT(length <= 4);  // prevent overflow
+
+  uc32 digits[4];
+  uc32 x = 0;
+  for (int i = 0; i < length; i++) {
+    digits[i] = c0_;
+    int d = HexValue(c0_);
+    if (d < 0) {
+      // According to ECMA-262, 3rd, 7.8.4, page 18, these hex escapes
+      // should be illegal, but other JS VMs just return the
+      // non-escaped version of the original character.
+
+      // Push back digits read, except the last one (in c0_).
+      for (int j = i-1; j >= 0; j--) {
+        PushBack(digits[j]);
+      }
+      // Notice: No handling of error - treat it as "\u"->"u".
+      return c;
+    }
+    x = x * 16 + d;
+    Advance();
+  }
+
+  return x;
+}
+
+
+// Octal escapes of the forms '\0xx' and '\xxx' are not a part of
+// ECMA-262. Other JS VMs support them.
+template <typename InputStream, typename LiteralsBuffer>
+uc32 Scanner<InputStream, LiteralsBuffer>::ScanOctalEscape(
+    uc32 c, int length) {
+  uc32 x = c - '0';
+  for (int i = 0; i < length; i++) {
+    int d = c0_ - '0';
+    if (d < 0 || d > 7) break;
+    int nx = x * 8 + d;
+    if (nx >= 256) break;
+    x = nx;
+    Advance();
+  }
+  return x;
+}
+
+
+template <typename InputStream, typename LiteralsBuffer>
+void Scanner<InputStream, LiteralsBuffer>::ScanEscape() {
+  uc32 c = c0_;
+  Advance();
+
+  // Skip escaped newlines.
+  if (i::ScannerConstants::kIsLineTerminator.get(c)) {
+    // Allow CR+LF newlines in multiline string literals.
+    if (i::IsCarriageReturn(c) && i::IsLineFeed(c0_)) Advance();
+    // Allow LF+CR newlines in multiline string literals.
+    if (i::IsLineFeed(c) && i::IsCarriageReturn(c0_)) Advance();
+    return;
+  }
+
+  switch (c) {
+    case '\'':  // fall through
+    case '"' :  // fall through
+    case '\\': break;
+    case 'b' : c = '\b'; break;
+    case 'f' : c = '\f'; break;
+    case 'n' : c = '\n'; break;
+    case 'r' : c = '\r'; break;
+    case 't' : c = '\t'; break;
+    case 'u' : c = ScanHexEscape(c, 4); break;
+    case 'v' : c = '\v'; break;
+    case 'x' : c = ScanHexEscape(c, 2); break;
+    case '0' :  // fall through
+    case '1' :  // fall through
+    case '2' :  // fall through
+    case '3' :  // fall through
+    case '4' :  // fall through
+    case '5' :  // fall through
+    case '6' :  // fall through
+    case '7' : c = ScanOctalEscape(c, 2); break;
+  }
+
+  // According to ECMA-262, 3rd, 7.8.4 (p 18ff) these
+  // should be illegal, but they are commonly handled
+  // as non-escaped characters by JS VMs.
+  AddLiteralChar(c);
+}
+
+
+template <typename InputStream, typename LiteralsBuffer>
+i::Token::Value Scanner<InputStream, LiteralsBuffer>::ScanString() {
+  uc32 quote = c0_;
+  Advance();  // consume quote
+
+  LiteralScope literal(this, kLiteralString);
+  while (c0_ != quote && c0_ >= 0
+         && !i::ScannerConstants::kIsLineTerminator.get(c0_)) {
+    uc32 c = c0_;
+    Advance();
+    if (c == '\\') {
+      if (c0_ < 0) return i::Token::ILLEGAL;
+      ScanEscape();
+    } else {
+      AddLiteralChar(c);
+    }
+  }
+  if (c0_ != quote) return i::Token::ILLEGAL;
+  literal.Complete();
+
+  Advance();  // consume quote
+  return i::Token::STRING;
+}
+
+
+template <typename InputStream, typename LiteralsBuffer>
+i::Token::Value Scanner<InputStream, LiteralsBuffer>::Select(
+    i::Token::Value tok) {
+  Advance();
+  return tok;
+}
+
+
+template <typename InputStream, typename LiteralsBuffer>
+i::Token::Value Scanner<InputStream, LiteralsBuffer>::Select(
+    uc32 next,
+    i::Token::Value then,
+    i::Token::Value else_) {
+  Advance();
+  if (c0_ == next) {
+    Advance();
+    return then;
+  } else {
+    return else_;
+  }
+}
+
+
+// Returns true if any decimal digits were scanned, returns false otherwise.
+template <typename InputStream, typename LiteralsBuffer>
+void Scanner<InputStream, LiteralsBuffer>::ScanDecimalDigits() {
+  while (i::IsDecimalDigit(c0_))
+    AddLiteralCharAdvance();
+}
+
+
+template <typename InputStream, typename LiteralsBuffer>
+i::Token::Value Scanner<InputStream, LiteralsBuffer>::ScanNumber(
+    bool seen_period) {
+  // c0_ is the first digit of the number or the fraction.
+  ASSERT(i::IsDecimalDigit(c0_));
+
+  enum { DECIMAL, HEX, OCTAL } kind = DECIMAL;
+
+  LiteralScope literal(this, kLiteralNumber);
+  if (seen_period) {
+    // we have already seen a decimal point of the float
+    AddLiteralChar('.');
+    ScanDecimalDigits();  // we know we have at least one digit
+
+  } else {
+    // if the first character is '0' we must check for octals and hex
+    if (c0_ == '0') {
+      AddLiteralCharAdvance();
+
+      // either 0, 0exxx, 0Exxx, 0.xxx, an octal number, or a hex number
+      if (c0_ == 'x' || c0_ == 'X') {
+        // hex number
+        kind = HEX;
+        AddLiteralCharAdvance();
+        if (!i::IsHexDigit(c0_)) {
+          // we must have at least one hex digit after 'x'/'X'
+          return i::Token::ILLEGAL;
+        }
+        while (i::IsHexDigit(c0_)) {
+          AddLiteralCharAdvance();
+        }
+      } else if ('0' <= c0_ && c0_ <= '7') {
+        // (possible) octal number
+        kind = OCTAL;
+        while (true) {
+          if (c0_ == '8' || c0_ == '9') {
+            kind = DECIMAL;
+            break;
+          }
+          if (c0_  < '0' || '7'  < c0_) break;
+          AddLiteralCharAdvance();
+        }
+      }
+    }
+
+    // Parse decimal digits and allow trailing fractional part.
+    if (kind == DECIMAL) {
+      ScanDecimalDigits();  // optional
+      if (c0_ == '.') {
+        AddLiteralCharAdvance();
+        ScanDecimalDigits();  // optional
+      }
+    }
+  }
+
+  // scan exponent, if any
+  if (c0_ == 'e' || c0_ == 'E') {
+    ASSERT(kind != HEX);  // 'e'/'E' must be scanned as part of the hex number
+    if (kind == OCTAL) return i::Token::ILLEGAL;
+    // scan exponent
+    AddLiteralCharAdvance();
+    if (c0_ == '+' || c0_ == '-')
+      AddLiteralCharAdvance();
+    if (!i::IsDecimalDigit(c0_)) {
+      // we must have at least one decimal digit after 'e'/'E'
+      return i::Token::ILLEGAL;
+    }
+    ScanDecimalDigits();
+  }
+
+  // The source character immediately following a numeric literal must
+  // not be an identifier start or a decimal digit; see ECMA-262
+  // section 7.8.3, page 17 (note that we read only one decimal digit
+  // if the value is 0).
+  if (i::IsDecimalDigit(c0_)
+      || i::ScannerConstants::kIsIdentifierStart.get(c0_))
+    return i::Token::ILLEGAL;
+
+  literal.Complete();
+
+  return i::Token::NUMBER;
+}
+
+
+template <typename InputStream, typename LiteralsBuffer>
+uc32 Scanner<InputStream, LiteralsBuffer>::ScanIdentifierUnicodeEscape() {
+  Advance();
+  if (c0_ != 'u') return unibrow::Utf8::kBadChar;
+  Advance();
+  uc32 c = ScanHexEscape('u', 4);
+  // We do not allow a unicode escape sequence to start another
+  // unicode escape sequence.
+  if (c == '\\') return unibrow::Utf8::kBadChar;
+  return c;
+}
+
+
+template <typename InputStream, typename LiteralsBuffer>
+i::Token::Value Scanner<InputStream, LiteralsBuffer>::ScanIdentifier() {
+  ASSERT(i::ScannerConstants::kIsIdentifierStart.get(c0_));
+
+  LiteralScope literal(this, kLiteralIdentifier);
+  i::KeywordMatcher keyword_match;
+
+  // Scan identifier start character.
+  if (c0_ == '\\') {
+    uc32 c = ScanIdentifierUnicodeEscape();
+    // Only allow legal identifier start characters.
+    if (!i::ScannerConstants::kIsIdentifierStart.get(c)) {
+      return i::Token::ILLEGAL;
+    }
+    AddLiteralChar(c);
+    keyword_match.Fail();
+  } else {
+    AddLiteralChar(c0_);
+    keyword_match.AddChar(c0_);
+    Advance();
+  }
+
+  // Scan the rest of the identifier characters.
+  while (i::ScannerConstants::kIsIdentifierPart.get(c0_)) {
+    if (c0_ == '\\') {
+      uc32 c = ScanIdentifierUnicodeEscape();
+      // Only allow legal identifier part characters.
+      if (!i::ScannerConstants::kIsIdentifierPart.get(c)) {
+        return i::Token::ILLEGAL;
+      }
+      AddLiteralChar(c);
+      keyword_match.Fail();
+    } else {
+      AddLiteralChar(c0_);
+      keyword_match.AddChar(c0_);
+      Advance();
+    }
+  }
+  literal.Complete();
+
+  return keyword_match.token();
+}
+
+
+template <typename InputStream, typename LiteralsBuffer>
+bool Scanner<InputStream, LiteralsBuffer>::ScanRegExpPattern(bool seen_equal) {
+  // Scan: ('/' | '/=') RegularExpressionBody '/' RegularExpressionFlags
+  bool in_character_class = false;
+
+  // Previous token is either '/' or '/=', in the second case, the
+  // pattern starts at =.
+  next_.location.beg_pos = source_pos() - (seen_equal ? 2 : 1);
+  next_.location.end_pos = source_pos() - (seen_equal ? 1 : 0);
+
+  // Scan regular expression body: According to ECMA-262, 3rd, 7.8.5,
+  // the scanner should pass uninterpreted bodies to the RegExp
+  // constructor.
+  LiteralScope literal(this, kLiteralRegExp);
+  if (seen_equal)
+    AddLiteralChar('=');
+
+  while (c0_ != '/' || in_character_class) {
+    if (i::ScannerConstants::kIsLineTerminator.get(c0_) || c0_ < 0) {
+      return false;
+    }
+    if (c0_ == '\\') {  // escaped character
+      AddLiteralCharAdvance();
+      if (i::ScannerConstants::kIsLineTerminator.get(c0_) || c0_ < 0) {
+        return false;
+      }
+      AddLiteralCharAdvance();
+    } else {  // unescaped character
+      if (c0_ == '[') in_character_class = true;
+      if (c0_ == ']') in_character_class = false;
+      AddLiteralCharAdvance();
+    }
+  }
+  Advance();  // consume '/'
+
+  literal.Complete();
+
+  return true;
+}
+
+template <typename InputStream, typename LiteralsBuffer>
+bool Scanner<InputStream, LiteralsBuffer>::ScanRegExpFlags() {
+  // Scan regular expression flags.
+  LiteralScope literal(this, kLiteralRegExpFlags);
+  while (i::ScannerConstants::kIsIdentifierPart.get(c0_)) {
+    if (c0_ == '\\') {
+      uc32 c = ScanIdentifierUnicodeEscape();
+      if (c != static_cast<uc32>(unibrow::Utf8::kBadChar)) {
+        // We allow any escaped character, unlike the restriction on
+        // IdentifierPart when it is used to build an IdentifierName.
+        AddLiteralChar(c);
+        continue;
+      }
+    }
+    AddLiteralCharAdvance();
+  }
+  literal.Complete();
+
+  next_.location.end_pos = source_pos() - 1;
+  return true;
+}
+
+
+} }  // namespace v8::preparser
+
+#endif  // V8_PRESCANNER_H_