Move lighttpd into deps because it's 20mb of win and mac specific...

lighttpd/README.OPENSSL

Index: lighttpd/README.OPENSSL
===================================================================
--- lighttpd/README.OPENSSL	(revision 0)
+++ lighttpd/README.OPENSSL	(revision 0)
@@ -0,0 +1,201 @@
+
+ OpenSSL 0.9.8g
+
+ Copyright (c) 1998-2007 The OpenSSL Project
+ Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
+ All rights reserved.
+
+ DESCRIPTION
+ -----------
+
+ The OpenSSL Project is a collaborative effort to develop a robust,
+ commercial-grade, fully featured, and Open Source toolkit implementing the
+ Secure Sockets Layer (SSL v2/v3) and Transport Layer Security (TLS v1)
+ protocols as well as a full-strength general purpose cryptography library.
+ The project is managed by a worldwide community of volunteers that use the
+ Internet to communicate, plan, and develop the OpenSSL toolkit and its
+ related documentation.
+
+ OpenSSL is based on the excellent SSLeay library developed from Eric A. Young
+ and Tim J. Hudson.  The OpenSSL toolkit is licensed under a dual-license (the
+ OpenSSL license plus the SSLeay license) situation, which basically means
+ that you are free to get and use it for commercial and non-commercial
+ purposes as long as you fulfill the conditions of both licenses.
+
+ OVERVIEW
+ --------
+
+ The OpenSSL toolkit includes:
+
+ libssl.a:
+     Implementation of SSLv2, SSLv3, TLSv1 and the required code to support
+     both SSLv2, SSLv3 and TLSv1 in the one server and client.
+
+ libcrypto.a:
+     General encryption and X.509 v1/v3 stuff needed by SSL/TLS but not
+     actually logically part of it. It includes routines for the following:
+
+     Ciphers
+        libdes - EAY's libdes DES encryption package which was floating
+                 around the net for a few years, and was then relicensed by
+                 him as part of SSLeay.  It includes 15 'modes/variations'
+                 of DES (1, 2 and 3 key versions of ecb, cbc, cfb and ofb;
+                 pcbc and a more general form of cfb and ofb) including desx
+                 in cbc mode, a fast crypt(3), and routines to read
+                 passwords from the keyboard.
+        RC4 encryption,
+        RC2 encryption      - 4 different modes, ecb, cbc, cfb and ofb.
+        Blowfish encryption - 4 different modes, ecb, cbc, cfb and ofb.
+        IDEA encryption     - 4 different modes, ecb, cbc, cfb and ofb.
+
+     Digests
+        MD5 and MD2 message digest algorithms, fast implementations,
+        SHA (SHA-0) and SHA-1 message digest algorithms,
+        MDC2 message digest. A DES based hash that is popular on smart cards.
+
+     Public Key
+        RSA encryption/decryption/generation.
+            There is no limit on the number of bits.
+        DSA encryption/decryption/generation.
+            There is no limit on the number of bits.
+        Diffie-Hellman key-exchange/key generation.
+            There is no limit on the number of bits.
+
+     X.509v3 certificates
+        X509 encoding/decoding into/from binary ASN1 and a PEM
+             based ASCII-binary encoding which supports encryption with a
+             private key.  Program to generate RSA and DSA certificate
+             requests and to generate RSA and DSA certificates.
+
+     Systems
+        The normal digital envelope routines and base64 encoding.  Higher
+        level access to ciphers and digests by name.  New ciphers can be
+        loaded at run time.  The BIO io system which is a simple non-blocking
+        IO abstraction.  Current methods supported are file descriptors,
+        sockets, socket accept, socket connect, memory buffer, buffering, SSL
+        client/server, file pointer, encryption, digest, non-blocking testing
+        and null.
+
+     Data structures
+        A dynamically growing hashing system
+        A simple stack.
+        A Configuration loader that uses a format similar to MS .ini files.
+
+ openssl:
+     A command line tool that can be used for:
+        Creation of RSA, DH and DSA key parameters
+        Creation of X.509 certificates, CSRs and CRLs
+        Calculation of Message Digests
+        Encryption and Decryption with Ciphers
+        SSL/TLS Client and Server Tests
+        Handling of S/MIME signed or encrypted mail
+
+
+ PATENTS
+ -------
+
+ Various companies hold various patents for various algorithms in various
+ locations around the world. _YOU_ are responsible for ensuring that your use
+ of any algorithms is legal by checking if there are any patents in your
+ country.  The file contains some of the patents that we know about or are
+ rumored to exist. This is not a definitive list.
+
+ RSA Security holds software patents on the RC5 algorithm.  If you
+ intend to use this cipher, you must contact RSA Security for
+ licensing conditions. Their web page is http://www.rsasecurity.com/.
+
+ RC4 is a trademark of RSA Security, so use of this label should perhaps
+ only be used with RSA Security's permission.
+
+ The IDEA algorithm is patented by Ascom in Austria, France, Germany, Italy,
+ Japan, the Netherlands, Spain, Sweden, Switzerland, UK and the USA.  They
+ should be contacted if that algorithm is to be used; their web page is
+ http://www.ascom.ch/.
+
+ The MDC2 algorithm is patented by IBM.
+
+ NTT and Mitsubishi have patents and pending patents on the Camellia
+ algorithm, but allow use at no charge without requiring an explicit
+ licensing agreement: http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html
+
+ INSTALLATION
+ ------------
+
+ To install this package under a Unix derivative, read the INSTALL file.  For
+ a Win32 platform, read the INSTALL.W32 file.  For OpenVMS systems, read
+ INSTALL.VMS.
+
+ Read the documentation in the doc/ directory.  It is quite rough, but it
+ lists the functions; you will probably have to look at the code to work out
+ how to use them. Look at the example programs.
+
+ PROBLEMS
+ --------
+
+ For some platforms, there are some known problems that may affect the user
+ or application author.  We try to collect those in doc/PROBLEMS, with current
+ thoughts on how they should be solved in a future of OpenSSL.
+
+ SUPPORT
+ -------
+
+ If you have any problems with OpenSSL then please take the following steps
+ first:
+
+    - Download the current snapshot from ftp://ftp.openssl.org/snapshot/
+      to see if the problem has already been addressed
+    - Remove ASM versions of libraries
+    - Remove compiler optimisation flags
+
+ If you wish to report a bug then please include the following information in
+ any bug report:
+
+    - On Unix systems:
+        Self-test report generated by 'make report'
+    - On other systems:
+        OpenSSL version: output of 'openssl version -a'
+        OS Name, Version, Hardware platform
+        Compiler Details (name, version)
+    - Application Details (name, version)
+    - Problem Description (steps that will reproduce the problem, if known)
+    - Stack Traceback (if the application dumps core)
+
+ Report the bug to the OpenSSL project via the Request Tracker
+ (http://www.openssl.org/support/rt2.html) by mail to:
+
+    openssl-bugs@openssl.org
+
+ Note that mail to openssl-bugs@openssl.org is recorded in the publicly
+ readable request tracker database and is forwarded to a public
+ mailing list. Confidential mail may be sent to openssl-security@openssl.org
+ (PGP key available from the key servers).
+
+ HOW TO CONTRIBUTE TO OpenSSL
+ ----------------------------
+
+ Development is coordinated on the openssl-dev mailing list (see
+ http://www.openssl.org for information on subscribing). If you
+ would like to submit a patch, send it to openssl-dev@openssl.org with
+ the string "[PATCH]" in the subject. Please be sure to include a
+ textual explanation of what your patch does.
+
+ Note: For legal reasons, contributions from the US can be accepted only
+ if a TSU notification and a copy of the patch are sent to crypt@bis.doc.gov
+ (formerly BXA) with a copy to the ENC Encryption Request Coordinator;
+ please take some time to look at
+    http://www.bis.doc.gov/Encryption/PubAvailEncSourceCodeNofify.html [sic]
+ and
+    http://w3.access.gpo.gov/bis/ear/pdf/740.pdf (EAR Section 740.13(e))
+ for the details. If "your encryption source code is too large to serve as
+ an email attachment", they are glad to receive it by fax instead; hope you
+ have a cheap long-distance plan.
+
+ Our preferred format for changes is "diff -u" output. You might
+ generate it like this:
+
+ # cd openssl-work
+ # [your changes]
+ # ./Configure dist; make clean
+ # cd ..
+ # diff -ur openssl-orig openssl-work > mydiffs.patch
+