Contribution of PowerPC port.

src/ppc/assembler-ppc.h

Index: src/ppc/assembler-ppc.h
diff --git a/src/ppc/assembler-ppc.h b/src/ppc/assembler-ppc.h
new file mode 100644
index 0000000000000000000000000000000000000000..0955d6c7f6989bc8d756d7ba4fcff9d8ce48b851
--- /dev/null
+++ b/src/ppc/assembler-ppc.h
@@ -0,0 +1,1497 @@
+// Copyright (c) 1994-2006 Sun Microsystems Inc.
+// All Rights Reserved.
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions
+// are met:
+//
+// - Redistributions of source code must retain the above copyright notice,
+// this list of conditions and the following disclaimer.
+//
+// - Redistribution in binary form must reproduce the above copyright
+// notice, this list of conditions and the following disclaimer in the
+// documentation and/or other materials provided with the
+// distribution.
+//
+// - Neither the name of Sun Microsystems or the names of contributors may
+// be used to endorse or promote products derived from this software without
+// specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+// FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+// COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+// SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+// HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+// OF THE POSSIBILITY OF SUCH DAMAGE.
+
+// The original source code covered by the above license above has been
+// modified significantly by Google Inc.
+// Copyright 2012 the V8 project authors. All rights reserved.
+
+//
+// Copyright IBM Corp. 2012, 2013. All rights reserved.
+//
+
+// A light-weight PPC Assembler
+// Generates user mode instructions for the PPC architecture up
+
+#ifndef V8_PPC_ASSEMBLER_PPC_H_
+#define V8_PPC_ASSEMBLER_PPC_H_
+
+#include <stdio.h>
+#include <vector>
+
+#include "src/assembler.h"
+#include "src/ppc/constants-ppc.h"
+#include "src/serialize.h"
+
+#define ABI_USES_FUNCTION_DESCRIPTORS \
+  (V8_HOST_ARCH_PPC && (V8_OS_AIX ||    \
+                      (V8_TARGET_ARCH_PPC64 && V8_TARGET_BIG_ENDIAN)))
+
+#define ABI_PASSES_HANDLES_IN_REGS \
+  (!V8_HOST_ARCH_PPC || V8_OS_AIX || V8_TARGET_ARCH_PPC64)
+
+#define ABI_RETURNS_HANDLES_IN_REGS \
+  (!V8_HOST_ARCH_PPC || V8_TARGET_LITTLE_ENDIAN)
+
+#define ABI_RETURNS_OBJECT_PAIRS_IN_REGS \
+  (!V8_HOST_ARCH_PPC || V8_TARGET_LITTLE_ENDIAN)
+
+#define ABI_TOC_ADDRESSABILITY_VIA_IP \
+  (V8_HOST_ARCH_PPC && V8_TARGET_ARCH_PPC64 && V8_TARGET_LITTLE_ENDIAN)
+
+#if !V8_HOST_ARCH_PPC || V8_OS_AIX || V8_TARGET_ARCH_PPC64
+#define ABI_TOC_REGISTER kRegister_r2_Code
+#else
+#define ABI_TOC_REGISTER kRegister_r13_Code
+#endif
+
+namespace v8 {
+namespace internal {
+
+// CPU Registers.
+//
+// 1) We would prefer to use an enum, but enum values are assignment-
+// compatible with int, which has caused code-generation bugs.
+//
+// 2) We would prefer to use a class instead of a struct but we don't like
+// the register initialization to depend on the particular initialization
+// order (which appears to be different on OS X, Linux, and Windows for the
+// installed versions of C++ we tried). Using a struct permits C-style
+// "initialization". Also, the Register objects cannot be const as this
+// forces initialization stubs in MSVC, making us dependent on initialization
+// order.
+//
+// 3) By not using an enum, we are possibly preventing the compiler from
+// doing certain constant folds, which may significantly reduce the
+// code generated for some assembly instructions (because they boil down
+// to a few constants). If this is a problem, we could change the code
+// such that we use an enum in optimized mode, and the struct in debug
+// mode. This way we get the compile-time error checking in debug mode
+// and best performance in optimized code.
+
+// Core register
+struct Register {
+  static const int kNumRegisters = 32;
+  static const int kSizeInBytes = kPointerSize;
+
+#if V8_TARGET_LITTLE_ENDIAN
+  static const int kMantissaOffset = 0;
+  static const int kExponentOffset = 4;
+#else
+  static const int kMantissaOffset = 4;
+  static const int kExponentOffset = 0;
+#endif
+
+  static const int kAllocatableLowRangeBegin = 3;
+  static const int kAllocatableLowRangeEnd = 10;
+  static const int kAllocatableHighRangeBegin = 14;
+#if V8_OOL_CONSTANT_POOL
+  static const int kAllocatableHighRangeEnd = 27;
+#else
+  static const int kAllocatableHighRangeEnd = 28;
+#endif
+  static const int kAllocatableContext = 30;
+
+  static const int kNumAllocatableLow =
+      kAllocatableLowRangeEnd - kAllocatableLowRangeBegin + 1;
+  static const int kNumAllocatableHigh =
+      kAllocatableHighRangeEnd - kAllocatableHighRangeBegin + 1;
+  static const int kMaxNumAllocatableRegisters =
+      kNumAllocatableLow + kNumAllocatableHigh + 1;  // cp
+  static int NumAllocatableRegisters() { return kMaxNumAllocatableRegisters; }
+
+  static int ToAllocationIndex(Register reg) {
+    int index;
+    int code = reg.code();
+    if (code == kAllocatableContext) {
+      // Context is the last index
+      index = NumAllocatableRegisters() - 1;
+    } else if (code <= kAllocatableLowRangeEnd) {
+      // low range
+      index = code - kAllocatableLowRangeBegin;
+    } else {
+      // high range
+      index = code - kAllocatableHighRangeBegin + kNumAllocatableLow;
+    }
+    DCHECK(index >= 0 && index < kMaxNumAllocatableRegisters);
+    return index;
+  }
+
+  static Register FromAllocationIndex(int index) {
+    DCHECK(index >= 0 && index < kMaxNumAllocatableRegisters);
+    // Last index is always the 'cp' register.
+    if (index == kMaxNumAllocatableRegisters - 1) {
+      return from_code(kAllocatableContext);
+    }
+    return (index < kNumAllocatableLow)
+               ? from_code(index + kAllocatableLowRangeBegin)
+               : from_code(index - kNumAllocatableLow +
+                           kAllocatableHighRangeBegin);
+  }
+
+  static const char* AllocationIndexToString(int index) {
+    DCHECK(index >= 0 && index < kMaxNumAllocatableRegisters);
+    const char* const names[] = {
+      "r3",
+      "r4",
+      "r5",
+      "r6",
+      "r7",
+      "r8",
+      "r9",
+      "r10",
+      "r14",
+      "r15",
+      "r16",
+      "r17",
+      "r18",
+      "r19",
+      "r20",
+      "r21",
+      "r22",
+      "r23",
+      "r24",
+      "r25",
+      "r26",
+      "r27",
+#if !V8_OOL_CONSTANT_POOL
+      "r28",
+#endif
+      "cp",
+    };
+    return names[index];
+  }
+
+  static Register from_code(int code) {
+    Register r = {code};
+    return r;
+  }
+
+  bool is_valid() const { return 0 <= code_ && code_ < kNumRegisters; }
+  bool is(Register reg) const { return code_ == reg.code_; }
+  int code() const {
+    DCHECK(is_valid());
+    return code_;
+  }
+  int bit() const {
+    DCHECK(is_valid());
+    return 1 << code_;
+  }
+
+  void set_code(int code) {
+    code_ = code;
+    DCHECK(is_valid());
+  }
+
+  // Unfortunately we can't make this private in a struct.
+  int code_;
+};
+
+// These constants are used in several locations, including static initializers
+const int kRegister_no_reg_Code = -1;
+const int kRegister_r0_Code = 0;  // general scratch
+const int kRegister_sp_Code = 1;  // stack pointer
+const int kRegister_r2_Code = 2;  // special on PowerPC
+const int kRegister_r3_Code = 3;
+const int kRegister_r4_Code = 4;
+const int kRegister_r5_Code = 5;
+const int kRegister_r6_Code = 6;
+const int kRegister_r7_Code = 7;
+const int kRegister_r8_Code = 8;
+const int kRegister_r9_Code = 9;
+const int kRegister_r10_Code = 10;
+const int kRegister_r11_Code = 11;  // lithium scratch
+const int kRegister_ip_Code = 12;   // ip (general scratch)
+const int kRegister_r13_Code = 13;  // special on PowerPC
+const int kRegister_r14_Code = 14;
+const int kRegister_r15_Code = 15;
+
+const int kRegister_r16_Code = 16;
+const int kRegister_r17_Code = 17;
+const int kRegister_r18_Code = 18;
+const int kRegister_r19_Code = 19;
+const int kRegister_r20_Code = 20;
+const int kRegister_r21_Code = 21;
+const int kRegister_r22_Code = 22;
+const int kRegister_r23_Code = 23;
+const int kRegister_r24_Code = 24;
+const int kRegister_r25_Code = 25;
+const int kRegister_r26_Code = 26;
+const int kRegister_r27_Code = 27;
+const int kRegister_r28_Code = 28;  // constant pool pointer
+const int kRegister_r29_Code = 29;  // roots array pointer
+const int kRegister_r30_Code = 30;  // context pointer
+const int kRegister_fp_Code = 31;   // frame pointer
+
+const Register no_reg = {kRegister_no_reg_Code};
+
+const Register r0 = {kRegister_r0_Code};
+const Register sp = {kRegister_sp_Code};
+const Register r2 = {kRegister_r2_Code};
+const Register r3 = {kRegister_r3_Code};
+const Register r4 = {kRegister_r4_Code};
+const Register r5 = {kRegister_r5_Code};
+const Register r6 = {kRegister_r6_Code};
+const Register r7 = {kRegister_r7_Code};
+const Register r8 = {kRegister_r8_Code};
+const Register r9 = {kRegister_r9_Code};
+const Register r10 = {kRegister_r10_Code};
+const Register r11 = {kRegister_r11_Code};
+const Register ip = {kRegister_ip_Code};
+const Register r13 = {kRegister_r13_Code};
+const Register r14 = {kRegister_r14_Code};
+const Register r15 = {kRegister_r15_Code};
+
+const Register r16 = {kRegister_r16_Code};
+const Register r17 = {kRegister_r17_Code};
+const Register r18 = {kRegister_r18_Code};
+const Register r19 = {kRegister_r19_Code};
+const Register r20 = {kRegister_r20_Code};
+const Register r21 = {kRegister_r21_Code};
+const Register r22 = {kRegister_r22_Code};
+const Register r23 = {kRegister_r23_Code};
+const Register r24 = {kRegister_r24_Code};
+const Register r25 = {kRegister_r25_Code};
+const Register r26 = {kRegister_r26_Code};
+const Register r27 = {kRegister_r27_Code};
+const Register r28 = {kRegister_r28_Code};
+const Register r29 = {kRegister_r29_Code};
+const Register r30 = {kRegister_r30_Code};
+const Register fp = {kRegister_fp_Code};
+
+// Give alias names to registers
+const Register cp = {kRegister_r30_Code};  // JavaScript context pointer
+const Register kRootRegister = {kRegister_r29_Code};  // Roots array pointer.
+#if V8_OOL_CONSTANT_POOL
+const Register kConstantPoolRegister = {kRegister_r28_Code};  // Constant pool
+#endif
+
+// Double word FP register.
+struct DoubleRegister {
+  static const int kNumRegisters = 32;
+  static const int kMaxNumRegisters = kNumRegisters;
+  static const int kNumVolatileRegisters = 14;  // d0-d13
+  static const int kSizeInBytes = 8;
+
+  static const int kAllocatableLowRangeBegin = 1;
+  static const int kAllocatableLowRangeEnd = 12;
+  static const int kAllocatableHighRangeBegin = 15;
+  static const int kAllocatableHighRangeEnd = 31;
+
+  static const int kNumAllocatableLow =
+      kAllocatableLowRangeEnd - kAllocatableLowRangeBegin + 1;
+  static const int kNumAllocatableHigh =
+      kAllocatableHighRangeEnd - kAllocatableHighRangeBegin + 1;
+  static const int kMaxNumAllocatableRegisters =
+      kNumAllocatableLow + kNumAllocatableHigh;
+  static int NumAllocatableRegisters() { return kMaxNumAllocatableRegisters; }
+
+  static int ToAllocationIndex(DoubleRegister reg) {
+    int code = reg.code();
+    int index = (code <= kAllocatableLowRangeEnd)
+                    ? code - kAllocatableLowRangeBegin
+                    : code - kAllocatableHighRangeBegin + kNumAllocatableLow;
+    DCHECK(index < kMaxNumAllocatableRegisters);
+    return index;
+  }
+
+  static DoubleRegister FromAllocationIndex(int index) {
+    DCHECK(index >= 0 && index < kMaxNumAllocatableRegisters);
+    return (index < kNumAllocatableLow)
+               ? from_code(index + kAllocatableLowRangeBegin)
+               : from_code(index - kNumAllocatableLow +
+                           kAllocatableHighRangeBegin);
+  }
+
+  static const char* AllocationIndexToString(int index);
+
+  static DoubleRegister from_code(int code) {
+    DoubleRegister r = {code};
+    return r;
+  }
+
+  bool is_valid() const { return 0 <= code_ && code_ < kMaxNumRegisters; }
+  bool is(DoubleRegister reg) const { return code_ == reg.code_; }
+
+  int code() const {
+    DCHECK(is_valid());
+    return code_;
+  }
+  int bit() const {
+    DCHECK(is_valid());
+    return 1 << code_;
+  }
+  void split_code(int* vm, int* m) const {
+    DCHECK(is_valid());
+    *m = (code_ & 0x10) >> 4;
+    *vm = code_ & 0x0F;
+  }
+
+  int code_;
+};
+
+
+const DoubleRegister no_dreg = {-1};
+const DoubleRegister d0 = {0};
+const DoubleRegister d1 = {1};
+const DoubleRegister d2 = {2};
+const DoubleRegister d3 = {3};
+const DoubleRegister d4 = {4};
+const DoubleRegister d5 = {5};
+const DoubleRegister d6 = {6};
+const DoubleRegister d7 = {7};
+const DoubleRegister d8 = {8};
+const DoubleRegister d9 = {9};
+const DoubleRegister d10 = {10};
+const DoubleRegister d11 = {11};
+const DoubleRegister d12 = {12};
+const DoubleRegister d13 = {13};
+const DoubleRegister d14 = {14};
+const DoubleRegister d15 = {15};
+const DoubleRegister d16 = {16};
+const DoubleRegister d17 = {17};
+const DoubleRegister d18 = {18};
+const DoubleRegister d19 = {19};
+const DoubleRegister d20 = {20};
+const DoubleRegister d21 = {21};
+const DoubleRegister d22 = {22};
+const DoubleRegister d23 = {23};
+const DoubleRegister d24 = {24};
+const DoubleRegister d25 = {25};
+const DoubleRegister d26 = {26};
+const DoubleRegister d27 = {27};
+const DoubleRegister d28 = {28};
+const DoubleRegister d29 = {29};
+const DoubleRegister d30 = {30};
+const DoubleRegister d31 = {31};
+
+// Aliases for double registers.  Defined using #define instead of
+// "static const DoubleRegister&" because Clang complains otherwise when a
+// compilation unit that includes this header doesn't use the variables.
+#define kFirstCalleeSavedDoubleReg d14
+#define kLastCalleeSavedDoubleReg d31
+#define kDoubleRegZero d14
+#define kScratchDoubleReg d13
+
+Register ToRegister(int num);
+
+// Coprocessor register
+struct CRegister {
+  bool is_valid() const { return 0 <= code_ && code_ < 16; }
+  bool is(CRegister creg) const { return code_ == creg.code_; }
+  int code() const {
+    DCHECK(is_valid());
+    return code_;
+  }
+  int bit() const {
+    DCHECK(is_valid());
+    return 1 << code_;
+  }
+
+  // Unfortunately we can't make this private in a struct.
+  int code_;
+};
+
+
+const CRegister no_creg = {-1};
+
+const CRegister cr0 = {0};
+const CRegister cr1 = {1};
+const CRegister cr2 = {2};
+const CRegister cr3 = {3};
+const CRegister cr4 = {4};
+const CRegister cr5 = {5};
+const CRegister cr6 = {6};
+const CRegister cr7 = {7};
+const CRegister cr8 = {8};
+const CRegister cr9 = {9};
+const CRegister cr10 = {10};
+const CRegister cr11 = {11};
+const CRegister cr12 = {12};
+const CRegister cr13 = {13};
+const CRegister cr14 = {14};
+const CRegister cr15 = {15};
+
+// -----------------------------------------------------------------------------
+// Machine instruction Operands
+
+#if V8_TARGET_ARCH_PPC64
+const RelocInfo::Mode kRelocInfo_NONEPTR = RelocInfo::NONE64;
+#else
+const RelocInfo::Mode kRelocInfo_NONEPTR = RelocInfo::NONE32;
+#endif
+
+// Class Operand represents a shifter operand in data processing instructions
+class Operand BASE_EMBEDDED {
+ public:
+  // immediate
+  INLINE(explicit Operand(intptr_t immediate,
+                          RelocInfo::Mode rmode = kRelocInfo_NONEPTR));
+  INLINE(static Operand Zero()) { return Operand(static_cast<intptr_t>(0)); }
+  INLINE(explicit Operand(const ExternalReference& f));
+  explicit Operand(Handle<Object> handle);
+  INLINE(explicit Operand(Smi* value));
+
+  // rm
+  INLINE(explicit Operand(Register rm));
+
+  // Return true if this is a register operand.
+  INLINE(bool is_reg() const);
+
+  // For mov.  Return the number of actual instructions required to
+  // load the operand into a register.  This can be anywhere from
+  // one (constant pool small section) to five instructions (full
+  // 64-bit sequence).
+  //
+  // The value returned is only valid as long as no entries are added to the
+  // constant pool between this call and the actual instruction being emitted.
+  bool must_output_reloc_info(const Assembler* assembler) const;
+
+  inline intptr_t immediate() const {
+    DCHECK(!rm_.is_valid());
+    return imm_;
+  }
+
+  Register rm() const { return rm_; }
+
+ private:
+  Register rm_;
+  intptr_t imm_;  // valid if rm_ == no_reg
+  RelocInfo::Mode rmode_;
+
+  friend class Assembler;
+  friend class MacroAssembler;
+};
+
+
+// Class MemOperand represents a memory operand in load and store instructions
+// On PowerPC we have base register + 16bit signed value
+// Alternatively we can have a 16bit signed value immediate
+class MemOperand BASE_EMBEDDED {
+ public:
+  explicit MemOperand(Register rn, int32_t offset = 0);
+
+  explicit MemOperand(Register ra, Register rb);
+
+  int32_t offset() const {
+    DCHECK(rb_.is(no_reg));
+    return offset_;
+  }
+
+  // PowerPC - base register
+  Register ra() const {
+    DCHECK(!ra_.is(no_reg));
+    return ra_;
+  }
+
+  Register rb() const {
+    DCHECK(offset_ == 0 && !rb_.is(no_reg));
+    return rb_;
+  }
+
+ private:
+  Register ra_;     // base
+  int32_t offset_;  // offset
+  Register rb_;     // index
+
+  friend class Assembler;
+};
+
+
+#if V8_OOL_CONSTANT_POOL
+// Class used to build a constant pool.
+class ConstantPoolBuilder BASE_EMBEDDED {
+ public:
+  ConstantPoolBuilder();
+  ConstantPoolArray::LayoutSection AddEntry(Assembler* assm,
+                                            const RelocInfo& rinfo);
+  void Relocate(intptr_t pc_delta);
+  bool IsEmpty();
+  Handle<ConstantPoolArray> New(Isolate* isolate);
+  void Populate(Assembler* assm, ConstantPoolArray* constant_pool);
+
+  inline ConstantPoolArray::LayoutSection current_section() const {
+    return current_section_;
+  }
+
+  // Rather than increasing the capacity of the ConstantPoolArray's
+  // small section to match the longer (16-bit) reach of PPC's load
+  // instruction (at the expense of a larger header to describe the
+  // layout), the PPC implementation utilizes the extended section to
+  // satisfy that reach.  I.e. all entries (regardless of their
+  // section) are reachable with a single load instruction.
+  //
+  // This implementation does not support an unlimited constant pool
+  // size (which would require a multi-instruction sequence).  [See
+  // ARM commit e27ab337 for a reference on the changes required to
+  // support the longer instruction sequence.]  Note, however, that
+  // going down that path will necessarily generate that longer
+  // sequence for all extended section accesses since the placement of
+  // a given entry within the section is not known at the time of
+  // code generation.
+  //
+  // TODO(mbrandy): Determine whether there is a benefit to supporting
+  // the longer sequence given that nops could be used for those
+  // entries which are reachable with a single instruction.
+  inline bool is_full() const { return !is_int16(size_); }
+
+  inline ConstantPoolArray::NumberOfEntries* number_of_entries(
+      ConstantPoolArray::LayoutSection section) {
+    return &number_of_entries_[section];
+  }
+
+  inline ConstantPoolArray::NumberOfEntries* small_entries() {
+    return number_of_entries(ConstantPoolArray::SMALL_SECTION);
+  }
+
+  inline ConstantPoolArray::NumberOfEntries* extended_entries() {
+    return number_of_entries(ConstantPoolArray::EXTENDED_SECTION);
+  }
+
+ private:
+  struct ConstantPoolEntry {
+    ConstantPoolEntry(RelocInfo rinfo, ConstantPoolArray::LayoutSection section,
+                      int merged_index)
+        : rinfo_(rinfo), section_(section), merged_index_(merged_index) {}
+
+    RelocInfo rinfo_;
+    ConstantPoolArray::LayoutSection section_;
+    int merged_index_;
+  };
+
+  ConstantPoolArray::Type GetConstantPoolType(RelocInfo::Mode rmode);
+
+  uint32_t size_;
+  std::vector<ConstantPoolEntry> entries_;
+  ConstantPoolArray::LayoutSection current_section_;
+  ConstantPoolArray::NumberOfEntries number_of_entries_[2];
+};
+#endif
+
+
+class Assembler : public AssemblerBase {
+ public:
+  // Create an assembler. Instructions and relocation information are emitted
+  // into a buffer, with the instructions starting from the beginning and the
+  // relocation information starting from the end of the buffer. See CodeDesc
+  // for a detailed comment on the layout (globals.h).
+  //
+  // If the provided buffer is NULL, the assembler allocates and grows its own
+  // buffer, and buffer_size determines the initial buffer size. The buffer is
+  // owned by the assembler and deallocated upon destruction of the assembler.
+  //
+  // If the provided buffer is not NULL, the assembler uses the provided buffer
+  // for code generation and assumes its size to be buffer_size. If the buffer
+  // is too small, a fatal error occurs. No deallocation of the buffer is done
+  // upon destruction of the assembler.
+  Assembler(Isolate* isolate, void* buffer, int buffer_size);
+  virtual ~Assembler() {}
+
+  // GetCode emits any pending (non-emitted) code and fills the descriptor
+  // desc. GetCode() is idempotent; it returns the same result if no other
+  // Assembler functions are invoked in between GetCode() calls.
+  void GetCode(CodeDesc* desc);
+
+  // Label operations & relative jumps (PPUM Appendix D)
+  //
+  // Takes a branch opcode (cc) and a label (L) and generates
+  // either a backward branch or a forward branch and links it
+  // to the label fixup chain. Usage:
+  //
+  // Label L;    // unbound label
+  // j(cc, &L);  // forward branch to unbound label
+  // bind(&L);   // bind label to the current pc
+  // j(cc, &L);  // backward branch to bound label
+  // bind(&L);   // illegal: a label may be bound only once
+  //
+  // Note: The same Label can be used for forward and backward branches
+  // but it may be bound only once.
+
+  void bind(Label* L);  // binds an unbound label L to the current code position
+  // Determines if Label is bound and near enough so that a single
+  // branch instruction can be used to reach it.
+  bool is_near(Label* L, Condition cond);
+
+  // Returns the branch offset to the given label from the current code position
+  // Links the label to the current position if it is still unbound
+  // Manages the jump elimination optimization if the second parameter is true.
+  int branch_offset(Label* L, bool jump_elimination_allowed);
+
+  // Puts a labels target address at the given position.
+  // The high 8 bits are set to zero.
+  void label_at_put(Label* L, int at_offset);
+
+#if V8_OOL_CONSTANT_POOL
+  INLINE(static bool IsConstantPoolLoadStart(Address pc));
+  INLINE(static bool IsConstantPoolLoadEnd(Address pc));
+  INLINE(static int GetConstantPoolOffset(Address pc));
+  INLINE(static void SetConstantPoolOffset(Address pc, int offset));
+
+  // Return the address in the constant pool of the code target address used by
+  // the branch/call instruction at pc, or the object in a mov.
+  INLINE(static Address target_constant_pool_address_at(
+      Address pc, ConstantPoolArray* constant_pool));
+#endif
+
+  // Read/Modify the code target address in the branch/call instruction at pc.
+  INLINE(static Address target_address_at(Address pc,
+                                          ConstantPoolArray* constant_pool));
+  INLINE(static void set_target_address_at(
+      Address pc, ConstantPoolArray* constant_pool, Address target,
+      ICacheFlushMode icache_flush_mode = FLUSH_ICACHE_IF_NEEDED));
+  INLINE(static Address target_address_at(Address pc, Code* code)) {
+    ConstantPoolArray* constant_pool = code ? code->constant_pool() : NULL;
+    return target_address_at(pc, constant_pool);
+  }
+  INLINE(static void set_target_address_at(
+      Address pc, Code* code, Address target,
+      ICacheFlushMode icache_flush_mode = FLUSH_ICACHE_IF_NEEDED)) {
+    ConstantPoolArray* constant_pool = code ? code->constant_pool() : NULL;
+    set_target_address_at(pc, constant_pool, target, icache_flush_mode);
+  }
+
+  // Return the code target address at a call site from the return address
+  // of that call in the instruction stream.
+  inline static Address target_address_from_return_address(Address pc);
+
+  // Given the address of the beginning of a call, return the address
+  // in the instruction stream that the call will return to.
+  INLINE(static Address return_address_from_call_start(Address pc));
+
+  // Return the code target address of the patch debug break slot
+  INLINE(static Address break_address_from_return_address(Address pc));
+
+  // This sets the branch destination.
+  // This is for calls and branches within generated code.
+  inline static void deserialization_set_special_target_at(
+      Address instruction_payload, Code* code, Address target);
+
+  // Size of an instruction.
+  static const int kInstrSize = sizeof(Instr);
+
+  // Here we are patching the address in the LUI/ORI instruction pair.
+  // These values are used in the serialization process and must be zero for
+  // PPC platform, as Code, Embedded Object or External-reference pointers
+  // are split across two consecutive instructions and don't exist separately
+  // in the code, so the serializer should not step forwards in memory after
+  // a target is resolved and written.
+  static const int kSpecialTargetSize = 0;
+
+// Number of instructions to load an address via a mov sequence.
+#if V8_TARGET_ARCH_PPC64
+  static const int kMovInstructionsConstantPool = 2;
+  static const int kMovInstructionsNoConstantPool = 5;
+#else
+  static const int kMovInstructionsConstantPool = 1;
+  static const int kMovInstructionsNoConstantPool = 2;
+#endif
+#if V8_OOL_CONSTANT_POOL
+  static const int kMovInstructions = kMovInstructionsConstantPool;
+#else
+  static const int kMovInstructions = kMovInstructionsNoConstantPool;
+#endif
+
+  // Distance between the instruction referring to the address of the call
+  // target and the return address.
+
+  // Call sequence is a FIXED_SEQUENCE:
+  // mov     r8, @ call address
+  // mtlr    r8
+  // blrl
+  //                      @ return address
+  static const int kCallTargetAddressOffset =
+      (kMovInstructions + 2) * kInstrSize;
+
+  // Distance between start of patched return sequence and the emitted address
+  // to jump to.
+  // Patched return sequence is a FIXED_SEQUENCE:
+  //   mov r0, <address>
+  //   mtlr r0
+  //   blrl
+  static const int kPatchReturnSequenceAddressOffset = 0 * kInstrSize;
+
+  // Distance between start of patched debug break slot and the emitted address
+  // to jump to.
+  // Patched debug break slot code is a FIXED_SEQUENCE:
+  //   mov r0, <address>
+  //   mtlr r0
+  //   blrl
+  static const int kPatchDebugBreakSlotAddressOffset = 0 * kInstrSize;
+
+  // This is the length of the BreakLocationIterator::SetDebugBreakAtReturn()
+  // code patch FIXED_SEQUENCE
+  static const int kJSReturnSequenceInstructions =
+      kMovInstructionsNoConstantPool + 3;
+
+  // This is the length of the code sequence from SetDebugBreakAtSlot()
+  // FIXED_SEQUENCE
+  static const int kDebugBreakSlotInstructions =
+      kMovInstructionsNoConstantPool + 2;
+  static const int kDebugBreakSlotLength =
+      kDebugBreakSlotInstructions * kInstrSize;
+
+  static inline int encode_crbit(const CRegister& cr, enum CRBit crbit) {
+    return ((cr.code() * CRWIDTH) + crbit);
+  }
+
+  // ---------------------------------------------------------------------------
+  // Code generation
+
+  // Insert the smallest number of nop instructions
+  // possible to align the pc offset to a multiple
+  // of m. m must be a power of 2 (>= 4).
+  void Align(int m);
+  // Aligns code to something that's optimal for a jump target for the platform.
+  void CodeTargetAlign();
+
+  // Branch instructions
+  void bclr(BOfield bo, LKBit lk);
+  void blr();
+  void bc(int branch_offset, BOfield bo, int condition_bit, LKBit lk = LeaveLK);
+  void b(int branch_offset, LKBit lk);
+
+  void bcctr(BOfield bo, LKBit lk);
+  void bctr();
+
+  // Convenience branch instructions using labels
+  void b(Label* L, LKBit lk = LeaveLK) { b(branch_offset(L, false), lk); }
+
+  void bc_short(Condition cond, Label* L, CRegister cr = cr7,
+                LKBit lk = LeaveLK) {
+    DCHECK(cond != al);
+    DCHECK(cr.code() >= 0 && cr.code() <= 7);
+
+    int b_offset = branch_offset(L, false);
+
+    switch (cond) {
+      case eq:
+        bc(b_offset, BT, encode_crbit(cr, CR_EQ), lk);
+        break;
+      case ne:
+        bc(b_offset, BF, encode_crbit(cr, CR_EQ), lk);
+        break;
+      case gt:
+        bc(b_offset, BT, encode_crbit(cr, CR_GT), lk);
+        break;
+      case le:
+        bc(b_offset, BF, encode_crbit(cr, CR_GT), lk);
+        break;
+      case lt:
+        bc(b_offset, BT, encode_crbit(cr, CR_LT), lk);
+        break;
+      case ge:
+        bc(b_offset, BF, encode_crbit(cr, CR_LT), lk);
+        break;
+      case unordered:
+        bc(b_offset, BT, encode_crbit(cr, CR_FU), lk);
+        break;
+      case ordered:
+        bc(b_offset, BF, encode_crbit(cr, CR_FU), lk);
+        break;
+      case overflow:
+        bc(b_offset, BT, encode_crbit(cr, CR_SO), lk);
+        break;
+      case nooverflow:
+        bc(b_offset, BF, encode_crbit(cr, CR_SO), lk);
+        break;
+      default:
+        UNIMPLEMENTED();
+    }
+  }
+
+  void b(Condition cond, Label* L, CRegister cr = cr7, LKBit lk = LeaveLK) {
+    if (cond == al) {
+      b(L, lk);
+      return;
+    }
+
+    if ((L->is_bound() && is_near(L, cond)) || !is_trampoline_emitted()) {
+      bc_short(cond, L, cr, lk);
+      return;
+    }
+
+    Label skip;
+    Condition neg_cond = NegateCondition(cond);
+    bc_short(neg_cond, &skip, cr);
+    b(L, lk);
+    bind(&skip);
+  }
+
+  void bne(Label* L, CRegister cr = cr7, LKBit lk = LeaveLK) {
+    b(ne, L, cr, lk);
+  }
+  void beq(Label* L, CRegister cr = cr7, LKBit lk = LeaveLK) {
+    b(eq, L, cr, lk);
+  }
+  void blt(Label* L, CRegister cr = cr7, LKBit lk = LeaveLK) {
+    b(lt, L, cr, lk);
+  }
+  void bge(Label* L, CRegister cr = cr7, LKBit lk = LeaveLK) {
+    b(ge, L, cr, lk);
+  }
+  void ble(Label* L, CRegister cr = cr7, LKBit lk = LeaveLK) {
+    b(le, L, cr, lk);
+  }
+  void bgt(Label* L, CRegister cr = cr7, LKBit lk = LeaveLK) {
+    b(gt, L, cr, lk);
+  }
+  void bunordered(Label* L, CRegister cr = cr7, LKBit lk = LeaveLK) {
+    b(unordered, L, cr, lk);
+  }
+  void bordered(Label* L, CRegister cr = cr7, LKBit lk = LeaveLK) {
+    b(ordered, L, cr, lk);
+  }
+  void boverflow(Label* L, CRegister cr = cr0, LKBit lk = LeaveLK) {
+    b(overflow, L, cr, lk);
+  }
+  void bnooverflow(Label* L, CRegister cr = cr0, LKBit lk = LeaveLK) {
+    b(nooverflow, L, cr, lk);
+  }
+
+  // Decrement CTR; branch if CTR != 0
+  void bdnz(Label* L, LKBit lk = LeaveLK) {
+    bc(branch_offset(L, false), DCBNZ, 0, lk);
+  }
+
+  // Data-processing instructions
+
+  void sub(Register dst, Register src1, Register src2, OEBit s = LeaveOE,
+           RCBit r = LeaveRC);
+
+  void subfic(Register dst, Register src, const Operand& imm);
+
+  void subfc(Register dst, Register src1, Register src2, OEBit s = LeaveOE,
+             RCBit r = LeaveRC);
+
+  void add(Register dst, Register src1, Register src2, OEBit s = LeaveOE,
+           RCBit r = LeaveRC);
+
+  void addc(Register dst, Register src1, Register src2, OEBit o = LeaveOE,
+            RCBit r = LeaveRC);
+
+  void addze(Register dst, Register src1, OEBit o, RCBit r);
+
+  void mullw(Register dst, Register src1, Register src2, OEBit o = LeaveOE,
+             RCBit r = LeaveRC);
+
+  void mulhw(Register dst, Register src1, Register src2, OEBit o = LeaveOE,
+             RCBit r = LeaveRC);
+
+  void divw(Register dst, Register src1, Register src2, OEBit o = LeaveOE,
+            RCBit r = LeaveRC);
+
+  void addi(Register dst, Register src, const Operand& imm);
+  void addis(Register dst, Register src, const Operand& imm);
+  void addic(Register dst, Register src, const Operand& imm);
+
+  void and_(Register dst, Register src1, Register src2, RCBit rc = LeaveRC);
+  void andc(Register dst, Register src1, Register src2, RCBit rc = LeaveRC);
+  void andi(Register ra, Register rs, const Operand& imm);
+  void andis(Register ra, Register rs, const Operand& imm);
+  void nor(Register dst, Register src1, Register src2, RCBit r = LeaveRC);
+  void notx(Register dst, Register src, RCBit r = LeaveRC);
+  void ori(Register dst, Register src, const Operand& imm);
+  void oris(Register dst, Register src, const Operand& imm);
+  void orx(Register dst, Register src1, Register src2, RCBit rc = LeaveRC);
+  void xori(Register dst, Register src, const Operand& imm);
+  void xoris(Register ra, Register rs, const Operand& imm);
+  void xor_(Register dst, Register src1, Register src2, RCBit rc = LeaveRC);
+  void cmpi(Register src1, const Operand& src2, CRegister cr = cr7);
+  void cmpli(Register src1, const Operand& src2, CRegister cr = cr7);
+  void cmpwi(Register src1, const Operand& src2, CRegister cr = cr7);
+  void cmplwi(Register src1, const Operand& src2, CRegister cr = cr7);
+  void li(Register dst, const Operand& src);
+  void lis(Register dst, const Operand& imm);
+  void mr(Register dst, Register src);
+
+  void lbz(Register dst, const MemOperand& src);
+  void lbzx(Register dst, const MemOperand& src);
+  void lbzux(Register dst, const MemOperand& src);
+  void lhz(Register dst, const MemOperand& src);
+  void lhzx(Register dst, const MemOperand& src);
+  void lhzux(Register dst, const MemOperand& src);
+  void lwz(Register dst, const MemOperand& src);
+  void lwzu(Register dst, const MemOperand& src);
+  void lwzx(Register dst, const MemOperand& src);
+  void lwzux(Register dst, const MemOperand& src);
+  void lwa(Register dst, const MemOperand& src);
+  void stb(Register dst, const MemOperand& src);
+  void stbx(Register dst, const MemOperand& src);
+  void stbux(Register dst, const MemOperand& src);
+  void sth(Register dst, const MemOperand& src);
+  void sthx(Register dst, const MemOperand& src);
+  void sthux(Register dst, const MemOperand& src);
+  void stw(Register dst, const MemOperand& src);
+  void stwu(Register dst, const MemOperand& src);
+  void stwx(Register rs, const MemOperand& src);
+  void stwux(Register rs, const MemOperand& src);
+
+  void extsb(Register rs, Register ra, RCBit r = LeaveRC);
+  void extsh(Register rs, Register ra, RCBit r = LeaveRC);
+
+  void neg(Register rt, Register ra, OEBit o = LeaveOE, RCBit c = LeaveRC);
+
+#if V8_TARGET_ARCH_PPC64
+  void ld(Register rd, const MemOperand& src);
+  void ldx(Register rd, const MemOperand& src);
+  void ldu(Register rd, const MemOperand& src);
+  void ldux(Register rd, const MemOperand& src);
+  void std(Register rs, const MemOperand& src);
+  void stdx(Register rs, const MemOperand& src);
+  void stdu(Register rs, const MemOperand& src);
+  void stdux(Register rs, const MemOperand& src);
+  void rldic(Register dst, Register src, int sh, int mb, RCBit r = LeaveRC);
+  void rldicl(Register dst, Register src, int sh, int mb, RCBit r = LeaveRC);
+  void rldcl(Register ra, Register rs, Register rb, int mb, RCBit r = LeaveRC);
+  void rldicr(Register dst, Register src, int sh, int me, RCBit r = LeaveRC);
+  void rldimi(Register dst, Register src, int sh, int mb, RCBit r = LeaveRC);
+  void sldi(Register dst, Register src, const Operand& val, RCBit rc = LeaveRC);
+  void srdi(Register dst, Register src, const Operand& val, RCBit rc = LeaveRC);
+  void clrrdi(Register dst, Register src, const Operand& val,
+              RCBit rc = LeaveRC);
+  void clrldi(Register dst, Register src, const Operand& val,
+              RCBit rc = LeaveRC);
+  void sradi(Register ra, Register rs, int sh, RCBit r = LeaveRC);
+  void srd(Register dst, Register src1, Register src2, RCBit r = LeaveRC);
+  void sld(Register dst, Register src1, Register src2, RCBit r = LeaveRC);
+  void srad(Register dst, Register src1, Register src2, RCBit r = LeaveRC);
+  void rotld(Register ra, Register rs, Register rb, RCBit r = LeaveRC);
+  void rotldi(Register ra, Register rs, int sh, RCBit r = LeaveRC);
+  void rotrdi(Register ra, Register rs, int sh, RCBit r = LeaveRC);
+  void cntlzd_(Register dst, Register src, RCBit rc = LeaveRC);
+  void extsw(Register rs, Register ra, RCBit r = LeaveRC);
+  void mulld(Register dst, Register src1, Register src2, OEBit o = LeaveOE,
+             RCBit r = LeaveRC);
+  void divd(Register dst, Register src1, Register src2, OEBit o = LeaveOE,
+            RCBit r = LeaveRC);
+#endif
+
+  void rlwinm(Register ra, Register rs, int sh, int mb, int me,
+              RCBit rc = LeaveRC);
+  void rlwimi(Register ra, Register rs, int sh, int mb, int me,
+              RCBit rc = LeaveRC);
+  void rlwnm(Register ra, Register rs, Register rb, int mb, int me,
+             RCBit rc = LeaveRC);
+  void slwi(Register dst, Register src, const Operand& val, RCBit rc = LeaveRC);
+  void srwi(Register dst, Register src, const Operand& val, RCBit rc = LeaveRC);
+  void clrrwi(Register dst, Register src, const Operand& val,
+              RCBit rc = LeaveRC);
+  void clrlwi(Register dst, Register src, const Operand& val,
+              RCBit rc = LeaveRC);
+  void srawi(Register ra, Register rs, int sh, RCBit r = LeaveRC);
+  void srw(Register dst, Register src1, Register src2, RCBit r = LeaveRC);
+  void slw(Register dst, Register src1, Register src2, RCBit r = LeaveRC);
+  void sraw(Register dst, Register src1, Register src2, RCBit r = LeaveRC);
+  void rotlw(Register ra, Register rs, Register rb, RCBit r = LeaveRC);
+  void rotlwi(Register ra, Register rs, int sh, RCBit r = LeaveRC);
+  void rotrwi(Register ra, Register rs, int sh, RCBit r = LeaveRC);
+
+  void cntlzw_(Register dst, Register src, RCBit rc = LeaveRC);
+
+  void subi(Register dst, Register src1, const Operand& src2);
+
+  void cmp(Register src1, Register src2, CRegister cr = cr7);
+  void cmpl(Register src1, Register src2, CRegister cr = cr7);
+  void cmpw(Register src1, Register src2, CRegister cr = cr7);
+  void cmplw(Register src1, Register src2, CRegister cr = cr7);
+
+  void mov(Register dst, const Operand& src);
+
+  // Load the position of the label relative to the generated code object
+  // pointer in a register.
+  void mov_label_offset(Register dst, Label* label);
+
+  // Multiply instructions
+  void mul(Register dst, Register src1, Register src2, OEBit s = LeaveOE,
+           RCBit r = LeaveRC);
+
+  // Miscellaneous arithmetic instructions
+
+  // Special register access
+  void crxor(int bt, int ba, int bb);
+  void crclr(int bt) { crxor(bt, bt, bt); }
+  void creqv(int bt, int ba, int bb);
+  void crset(int bt) { creqv(bt, bt, bt); }
+  void mflr(Register dst);
+  void mtlr(Register src);
+  void mtctr(Register src);
+  void mtxer(Register src);
+  void mcrfs(int bf, int bfa);
+  void mfcr(Register dst);
+#if V8_TARGET_ARCH_PPC64
+  void mffprd(Register dst, DoubleRegister src);
+  void mffprwz(Register dst, DoubleRegister src);
+  void mtfprd(DoubleRegister dst, Register src);
+  void mtfprwz(DoubleRegister dst, Register src);
+  void mtfprwa(DoubleRegister dst, Register src);
+#endif
+
+  void fake_asm(enum FAKE_OPCODE_T fopcode);
+  void marker_asm(int mcode);
+  void function_descriptor();
+
+  // Exception-generating instructions and debugging support
+  void stop(const char* msg, Condition cond = al,
+            int32_t code = kDefaultStopCode, CRegister cr = cr7);
+
+  void bkpt(uint32_t imm16);  // v5 and above
+
+  // Informational messages when simulating
+  void info(const char* msg, Condition cond = al,
+            int32_t code = kDefaultStopCode, CRegister cr = cr7);
+
+  void dcbf(Register ra, Register rb);
+  void sync();
+  void icbi(Register ra, Register rb);
+  void isync();
+
+  // Support for floating point
+  void lfd(const DoubleRegister frt, const MemOperand& src);
+  void lfdu(const DoubleRegister frt, const MemOperand& src);
+  void lfdx(const DoubleRegister frt, const MemOperand& src);
+  void lfdux(const DoubleRegister frt, const MemOperand& src);
+  void lfs(const DoubleRegister frt, const MemOperand& src);
+  void lfsu(const DoubleRegister frt, const MemOperand& src);
+  void lfsx(const DoubleRegister frt, const MemOperand& src);
+  void lfsux(const DoubleRegister frt, const MemOperand& src);
+  void stfd(const DoubleRegister frs, const MemOperand& src);
+  void stfdu(const DoubleRegister frs, const MemOperand& src);
+  void stfdx(const DoubleRegister frs, const MemOperand& src);
+  void stfdux(const DoubleRegister frs, const MemOperand& src);
+  void stfs(const DoubleRegister frs, const MemOperand& src);
+  void stfsu(const DoubleRegister frs, const MemOperand& src);
+  void stfsx(const DoubleRegister frs, const MemOperand& src);
+  void stfsux(const DoubleRegister frs, const MemOperand& src);
+
+  void fadd(const DoubleRegister frt, const DoubleRegister fra,
+            const DoubleRegister frb, RCBit rc = LeaveRC);
+  void fsub(const DoubleRegister frt, const DoubleRegister fra,
+            const DoubleRegister frb, RCBit rc = LeaveRC);
+  void fdiv(const DoubleRegister frt, const DoubleRegister fra,
+            const DoubleRegister frb, RCBit rc = LeaveRC);
+  void fmul(const DoubleRegister frt, const DoubleRegister fra,
+            const DoubleRegister frc, RCBit rc = LeaveRC);
+  void fcmpu(const DoubleRegister fra, const DoubleRegister frb,
+             CRegister cr = cr7);
+  void fmr(const DoubleRegister frt, const DoubleRegister frb,
+           RCBit rc = LeaveRC);
+  void fctiwz(const DoubleRegister frt, const DoubleRegister frb);
+  void fctiw(const DoubleRegister frt, const DoubleRegister frb);
+  void frim(const DoubleRegister frt, const DoubleRegister frb);
+  void frsp(const DoubleRegister frt, const DoubleRegister frb,
+            RCBit rc = LeaveRC);
+  void fcfid(const DoubleRegister frt, const DoubleRegister frb,
+             RCBit rc = LeaveRC);
+  void fctid(const DoubleRegister frt, const DoubleRegister frb,
+             RCBit rc = LeaveRC);
+  void fctidz(const DoubleRegister frt, const DoubleRegister frb,
+              RCBit rc = LeaveRC);
+  void fsel(const DoubleRegister frt, const DoubleRegister fra,
+            const DoubleRegister frc, const DoubleRegister frb,
+            RCBit rc = LeaveRC);
+  void fneg(const DoubleRegister frt, const DoubleRegister frb,
+            RCBit rc = LeaveRC);
+  void mtfsfi(int bf, int immediate, RCBit rc = LeaveRC);
+  void mffs(const DoubleRegister frt, RCBit rc = LeaveRC);
+  void mtfsf(const DoubleRegister frb, bool L = 1, int FLM = 0, bool W = 0,
+             RCBit rc = LeaveRC);
+  void fsqrt(const DoubleRegister frt, const DoubleRegister frb,
+             RCBit rc = LeaveRC);
+  void fabs(const DoubleRegister frt, const DoubleRegister frb,
+            RCBit rc = LeaveRC);
+  void fmadd(const DoubleRegister frt, const DoubleRegister fra,
+             const DoubleRegister frc, const DoubleRegister frb,
+             RCBit rc = LeaveRC);
+  void fmsub(const DoubleRegister frt, const DoubleRegister fra,
+             const DoubleRegister frc, const DoubleRegister frb,
+             RCBit rc = LeaveRC);
+
+  // Pseudo instructions
+
+  // Different nop operations are used by the code generator to detect certain
+  // states of the generated code.
+  enum NopMarkerTypes {
+    NON_MARKING_NOP = 0,
+    DEBUG_BREAK_NOP,
+    // IC markers.
+    PROPERTY_ACCESS_INLINED,
+    PROPERTY_ACCESS_INLINED_CONTEXT,
+    PROPERTY_ACCESS_INLINED_CONTEXT_DONT_DELETE,
+    // Helper values.
+    LAST_CODE_MARKER,
+    FIRST_IC_MARKER = PROPERTY_ACCESS_INLINED
+  };
+
+  void nop(int type = 0);  // 0 is the default non-marking type.
+
+  void push(Register src) {
+#if V8_TARGET_ARCH_PPC64
+    stdu(src, MemOperand(sp, -8));
+#else
+    stwu(src, MemOperand(sp, -4));
+#endif
+  }
+
+  void pop(Register dst) {
+#if V8_TARGET_ARCH_PPC64
+    ld(dst, MemOperand(sp));
+    addi(sp, sp, Operand(8));
+#else
+    lwz(dst, MemOperand(sp));
+    addi(sp, sp, Operand(4));
+#endif
+  }
+
+  void pop() { addi(sp, sp, Operand(kPointerSize)); }
+
+  // Jump unconditionally to given label.
+  void jmp(Label* L) { b(L); }
+
+  // Check the code size generated from label to here.
+  int SizeOfCodeGeneratedSince(Label* label) {
+    return pc_offset() - label->pos();
+  }
+
+  // Check the number of instructions generated from label to here.
+  int InstructionsGeneratedSince(Label* label) {
+    return SizeOfCodeGeneratedSince(label) / kInstrSize;
+  }
+
+  // Class for scoping postponing the trampoline pool generation.
+  class BlockTrampolinePoolScope {
+   public:
+    explicit BlockTrampolinePoolScope(Assembler* assem) : assem_(assem) {
+      assem_->StartBlockTrampolinePool();
+    }
+    ~BlockTrampolinePoolScope() { assem_->EndBlockTrampolinePool(); }
+
+   private:
+    Assembler* assem_;
+
+    DISALLOW_IMPLICIT_CONSTRUCTORS(BlockTrampolinePoolScope);
+  };
+
+  // Debugging
+
+  // Mark address of the ExitJSFrame code.
+  void RecordJSReturn();
+
+  // Mark address of a debug break slot.
+  void RecordDebugBreakSlot();
+
+  // Record the AST id of the CallIC being compiled, so that it can be placed
+  // in the relocation information.
+  void SetRecordedAstId(TypeFeedbackId ast_id) {
+    // PPC - this shouldn't be failing roohack
+    // DCHECK(recorded_ast_id_.IsNone());
+    recorded_ast_id_ = ast_id;
+  }
+
+  TypeFeedbackId RecordedAstId() {
+    // roohack - another issue??? DCHECK(!recorded_ast_id_.IsNone());
+    return recorded_ast_id_;
+  }
+
+  void ClearRecordedAstId() { recorded_ast_id_ = TypeFeedbackId::None(); }
+
+  // Record a comment relocation entry that can be used by a disassembler.
+  // Use --code-comments to enable.
+  void RecordComment(const char* msg);
+
+  // Writes a single byte or word of data in the code stream.  Used
+  // for inline tables, e.g., jump-tables.
+  void db(uint8_t data);
+  void dd(uint32_t data);
+  void emit_ptr(uintptr_t data);
+
+  PositionsRecorder* positions_recorder() { return &positions_recorder_; }
+
+  // Read/patch instructions
+  Instr instr_at(int pos) { return *reinterpret_cast<Instr*>(buffer_ + pos); }
+  void instr_at_put(int pos, Instr instr) {
+    *reinterpret_cast<Instr*>(buffer_ + pos) = instr;
+  }
+  static Instr instr_at(byte* pc) { return *reinterpret_cast<Instr*>(pc); }
+  static void instr_at_put(byte* pc, Instr instr) {
+    *reinterpret_cast<Instr*>(pc) = instr;
+  }
+  static Condition GetCondition(Instr instr);
+
+  static bool IsLis(Instr instr);
+  static bool IsLi(Instr instr);
+  static bool IsAddic(Instr instr);
+  static bool IsOri(Instr instr);
+
+  static bool IsBranch(Instr instr);
+  static Register GetRA(Instr instr);
+  static Register GetRB(Instr instr);
+#if V8_TARGET_ARCH_PPC64
+  static bool Is64BitLoadIntoR12(Instr instr1, Instr instr2, Instr instr3,
+                                 Instr instr4, Instr instr5);
+#else
+  static bool Is32BitLoadIntoR12(Instr instr1, Instr instr2);
+#endif
+
+  static bool IsCmpRegister(Instr instr);
+  static bool IsCmpImmediate(Instr instr);
+  static bool IsRlwinm(Instr instr);
+#if V8_TARGET_ARCH_PPC64
+  static bool IsRldicl(Instr instr);
+#endif
+  static bool IsCrSet(Instr instr);
+  static Register GetCmpImmediateRegister(Instr instr);
+  static int GetCmpImmediateRawImmediate(Instr instr);
+  static bool IsNop(Instr instr, int type = NON_MARKING_NOP);
+
+  // Postpone the generation of the trampoline pool for the specified number of
+  // instructions.
+  void BlockTrampolinePoolFor(int instructions);
+  void CheckTrampolinePool();
+
+  int instructions_required_for_mov(const Operand& x) const;
+
+#if V8_OOL_CONSTANT_POOL
+  // Decide between using the constant pool vs. a mov immediate sequence.
+  bool use_constant_pool_for_mov(const Operand& x, bool canOptimize) const;
+
+  // The code currently calls CheckBuffer() too often. This has the side
+  // effect of randomly growing the buffer in the middle of multi-instruction
+  // sequences.
+  // MacroAssembler::LoadConstantPoolPointerRegister() includes a relocation
+  // and multiple instructions. We cannot grow the buffer until the
+  // relocation and all of the instructions are written.
+  //
+  // This function allows outside callers to check and grow the buffer
+  void EnsureSpaceFor(int space_needed);
+#endif
+
+  // Allocate a constant pool of the correct size for the generated code.
+  Handle<ConstantPoolArray> NewConstantPool(Isolate* isolate);
+
+  // Generate the constant pool for the generated code.
+  void PopulateConstantPool(ConstantPoolArray* constant_pool);
+
+#if V8_OOL_CONSTANT_POOL
+  bool is_constant_pool_available() const { return constant_pool_available_; }
+
+  bool is_constant_pool_full() const {
+    return constant_pool_builder_.is_full();
+  }
+
+  bool use_extended_constant_pool() const {
+    return constant_pool_builder_.current_section() ==
+           ConstantPoolArray::EXTENDED_SECTION;
+  }
+#endif
+
+#if ABI_USES_FUNCTION_DESCRIPTORS || V8_OOL_CONSTANT_POOL
+  static void RelocateInternalReference(
+      Address pc, intptr_t delta, Address code_start,
+      ICacheFlushMode icache_flush_mode = FLUSH_ICACHE_IF_NEEDED);
+  static int DecodeInternalReference(Vector<char> buffer, Address pc);
+#endif
+
+ protected:
+  // Relocation for a type-recording IC has the AST id added to it.  This
+  // member variable is a way to pass the information from the call site to
+  // the relocation info.
+  TypeFeedbackId recorded_ast_id_;
+
+  int buffer_space() const { return reloc_info_writer.pos() - pc_; }
+
+  // Decode branch instruction at pos and return branch target pos
+  int target_at(int pos);
+
+  // Patch branch instruction at pos to branch to given branch target pos
+  void target_at_put(int pos, int target_pos);
+
+  // Record reloc info for current pc_
+  void RecordRelocInfo(RelocInfo::Mode rmode, intptr_t data = 0);
+  void RecordRelocInfo(const RelocInfo& rinfo);
+#if V8_OOL_CONSTANT_POOL
+  ConstantPoolArray::LayoutSection ConstantPoolAddEntry(
+      const RelocInfo& rinfo) {
+    return constant_pool_builder_.AddEntry(this, rinfo);
+  }
+#endif
+
+  // Block the emission of the trampoline pool before pc_offset.
+  void BlockTrampolinePoolBefore(int pc_offset) {
+    if (no_trampoline_pool_before_ < pc_offset)
+      no_trampoline_pool_before_ = pc_offset;
+  }
+
+  void StartBlockTrampolinePool() { trampoline_pool_blocked_nesting_++; }
+
+  void EndBlockTrampolinePool() { trampoline_pool_blocked_nesting_--; }
+
+  bool is_trampoline_pool_blocked() const {
+    return trampoline_pool_blocked_nesting_ > 0;
+  }
+
+  bool has_exception() const { return internal_trampoline_exception_; }
+
+  bool is_trampoline_emitted() const { return trampoline_emitted_; }
+
+#if V8_OOL_CONSTANT_POOL
+  void set_constant_pool_available(bool available) {
+    constant_pool_available_ = available;
+  }
+#endif
+
+ private:
+  // Code generation
+  // The relocation writer's position is at least kGap bytes below the end of
+  // the generated instructions. This is so that multi-instruction sequences do
+  // not have to check for overflow. The same is true for writes of large
+  // relocation info entries.
+  static const int kGap = 32;
+
+  // Repeated checking whether the trampoline pool should be emitted is rather
+  // expensive. By default we only check again once a number of instructions
+  // has been generated.
+  int next_buffer_check_;  // pc offset of next buffer check.
+
+  // Emission of the trampoline pool may be blocked in some code sequences.
+  int trampoline_pool_blocked_nesting_;  // Block emission if this is not zero.
+  int no_trampoline_pool_before_;  // Block emission before this pc offset.
+
+  // Relocation info generation
+  // Each relocation is encoded as a variable size value
+  static const int kMaxRelocSize = RelocInfoWriter::kMaxSize;
+  RelocInfoWriter reloc_info_writer;
+
+  // The bound position, before this we cannot do instruction elimination.
+  int last_bound_pos_;
+
+#if V8_OOL_CONSTANT_POOL
+  ConstantPoolBuilder constant_pool_builder_;
+
+  // Indicates whether the constant pool can be accessed, which is only possible
+  // if kConstantPoolRegister points to the current code object's constant pool.
+  bool constant_pool_available_;
+#endif
+
+  // Code emission
+  inline void CheckBuffer();
+  void GrowBuffer();
+  inline void emit(Instr x);
+  inline void CheckTrampolinePoolQuick();
+
+  // Instruction generation
+  void a_form(Instr instr, DoubleRegister frt, DoubleRegister fra,
+              DoubleRegister frb, RCBit r);
+  void d_form(Instr instr, Register rt, Register ra, const intptr_t val,
+              bool signed_disp);
+  void x_form(Instr instr, Register ra, Register rs, Register rb, RCBit r);
+  void xo_form(Instr instr, Register rt, Register ra, Register rb, OEBit o,
+               RCBit r);
+  void md_form(Instr instr, Register ra, Register rs, int shift, int maskbit,
+               RCBit r);
+  void mds_form(Instr instr, Register ra, Register rs, Register rb, int maskbit,
+                RCBit r);
+
+  // Labels
+  void print(Label* L);
+  int max_reach_from(int pos);
+  void bind_to(Label* L, int pos);
+  void next(Label* L);
+
+  class Trampoline {
+   public:
+    Trampoline() {
+      next_slot_ = 0;
+      free_slot_count_ = 0;
+    }
+    Trampoline(int start, int slot_count) {
+      next_slot_ = start;
+      free_slot_count_ = slot_count;
+    }
+    int take_slot() {
+      int trampoline_slot = kInvalidSlotPos;
+      if (free_slot_count_ <= 0) {
+        // We have run out of space on trampolines.
+        // Make sure we fail in debug mode, so we become aware of each case
+        // when this happens.
+        DCHECK(0);
+        // Internal exception will be caught.
+      } else {
+        trampoline_slot = next_slot_;
+        free_slot_count_--;
+        next_slot_ += kTrampolineSlotsSize;
+      }
+      return trampoline_slot;
+    }
+
+   private:
+    int next_slot_;
+    int free_slot_count_;
+  };
+
+  int32_t get_trampoline_entry();
+  int unbound_labels_count_;
+  // If trampoline is emitted, generated code is becoming large. As
+  // this is already a slow case which can possibly break our code
+  // generation for the extreme case, we use this information to
+  // trigger different mode of branch instruction generation, where we
+  // no longer use a single branch instruction.
+  bool trampoline_emitted_;
+  static const int kTrampolineSlotsSize = kInstrSize;
+  static const int kMaxCondBranchReach = (1 << (16 - 1)) - 1;
+  static const int kMaxBlockTrampolineSectionSize = 64 * kInstrSize;
+  static const int kInvalidSlotPos = -1;
+
+  Trampoline trampoline_;
+  bool internal_trampoline_exception_;
+
+  friend class RegExpMacroAssemblerPPC;
+  friend class RelocInfo;
+  friend class CodePatcher;
+  friend class BlockTrampolinePoolScope;
+#if V8_OOL_CONSTANT_POOL
+  friend class FrameAndConstantPoolScope;
+  friend class ConstantPoolUnavailableScope;
+#endif
+
+  PositionsRecorder positions_recorder_;
+  friend class PositionsRecorder;
+  friend class EnsureSpace;
+};
+
+
+class EnsureSpace BASE_EMBEDDED {
+ public:
+  explicit EnsureSpace(Assembler* assembler) { assembler->CheckBuffer(); }
+};
+}
+}  // namespace v8::internal
+
+#endif  // V8_PPC_ASSEMBLER_PPC_H_