cc: Start using raster/eviction iterators.

cc/layers/picture_layer_impl.cc

Index: cc/layers/picture_layer_impl.cc
diff --git a/cc/layers/picture_layer_impl.cc b/cc/layers/picture_layer_impl.cc
index 481536b1a04d15bc471dc96c85d63818edd8ce53..3f1e467c10b9e20588ac3aafa176d545c0d8ad05 100644
--- a/cc/layers/picture_layer_impl.cc
+++ b/cc/layers/picture_layer_impl.cc
@@ -86,15 +86,6 @@ void PictureLayerImpl::PushPropertiesTo(LayerImpl* base_layer) {
   DoPostCommitInitializationIfNeeded();
   PictureLayerImpl* layer_impl = static_cast<PictureLayerImpl*>(base_layer);
 
-  // We have already synced the important bits from the the active layer, and
-  // we will soon swap out its tilings and use them for recycling. However,
-  // there are now tiles in this layer's tilings that were unref'd and replaced
-  // with new tiles (due to invalidation). This resets all active priorities on
-  // the to-be-recycled tiling to ensure replaced tiles don't linger and take
-  // memory (due to a stale 'active' priority).
-  if (layer_impl->tilings_)
-    layer_impl->tilings_->DidBecomeRecycled();
-
   LayerImpl::PushPropertiesTo(base_layer);
 
   // When the pending tree pushes to the active tree, the pending twin
@@ -221,10 +212,10 @@ void PictureLayerImpl::AppendQuads(
         } else if (mode == ManagedTileState::TileVersion::PICTURE_PILE_MODE) {
           color = DebugColors::PictureTileBorderColor();
           width = DebugColors::PictureTileBorderWidth(layer_tree_impl());
-        } else if (iter->priority(ACTIVE_TREE).resolution == HIGH_RESOLUTION) {
+        } else if (iter.resolution() == HIGH_RESOLUTION) {
           color = DebugColors::HighResTileBorderColor();
           width = DebugColors::HighResTileBorderWidth(layer_tree_impl());
-        } else if (iter->priority(ACTIVE_TREE).resolution == LOW_RESOLUTION) {
+        } else if (iter.resolution() == LOW_RESOLUTION) {
           color = DebugColors::LowResTileBorderColor();
           width = DebugColors::LowResTileBorderWidth(layer_tree_impl());
         } else if (iter->contents_scale() > max_contents_scale) {
@@ -361,7 +352,7 @@ void PictureLayerImpl::AppendQuads(
       continue;
     }
 
-    if (iter->priority(ACTIVE_TREE).resolution != HIGH_RESOLUTION) {
+    if (iter.resolution() != HIGH_RESOLUTION) {
       append_quads_data->approximated_visible_content_area +=
           visible_geometry_rect.width() * visible_geometry_rect.height();
     }
@@ -435,9 +426,6 @@ void PictureLayerImpl::UpdateTiles(
   should_update_tile_priorities_ = true;
 
   UpdateTilePriorities(occlusion_tracker);
-
-  if (layer_tree_impl()->IsPendingTree())
-    MarkVisibleResourcesAsRequired();
 }
 
 void PictureLayerImpl::UpdateTilePriorities(
@@ -600,6 +588,16 @@ int PictureLayerImpl::GetSkewportExtrapolationLimitInContentPixels() const {
       .skewport_extrapolation_limit_in_content_pixels;
 }
 
+bool PictureLayerImpl::RequiresHighResToDraw() const {
+  const PictureLayerImpl* layer = this;
+  if (GetTree() == PENDING_TREE)
+    layer = twin_layer_;
+
+  if (layer)
+    return layer->layer_tree_impl()->RequiresHighResToDraw();
+  return false;
+}
+
 gfx::Size PictureLayerImpl::CalculateTileSize(
     const gfx::Size& content_bounds) const {
   if (is_mask_) {
@@ -749,159 +747,6 @@ ResourceProvider::ResourceId PictureLayerImpl::ContentsResourceId() const {
   return tile_version.get_resource_id();
 }
 
-void PictureLayerImpl::MarkVisibleResourcesAsRequired() const {
-  DCHECK(layer_tree_impl()->IsPendingTree());
-  DCHECK(ideal_contents_scale_);
-  DCHECK_GT(tilings_->num_tilings(), 0u);
-
-  // The goal of this function is to find the minimum set of tiles that need to
-  // be ready to draw in order to activate without flashing content from a
-  // higher res on the active tree to a lower res on the pending tree.
-
-  // First, early out for layers with no visible content.
-  if (visible_content_rect().IsEmpty())
-    return;
-
-  gfx::Rect rect(visible_content_rect());
-
-  float min_acceptable_scale =
-      std::min(raster_contents_scale_, ideal_contents_scale_);
-
-  if (PictureLayerImpl* twin = twin_layer_) {
-    float twin_min_acceptable_scale =
-        std::min(twin->ideal_contents_scale_, twin->raster_contents_scale_);
-    // Ignore 0 scale in case CalculateContentsScale() has never been
-    // called for active twin.
-    if (twin_min_acceptable_scale != 0.0f) {
-      min_acceptable_scale =
-          std::min(min_acceptable_scale, twin_min_acceptable_scale);
-    }
-  }
-
-  PictureLayerTiling* high_res = NULL;
-  PictureLayerTiling* low_res = NULL;
-
-  // First pass: ready to draw tiles in acceptable but non-ideal tilings are
-  // marked as required for activation so that their textures are not thrown
-  // away; any non-ready tiles are not marked as required.
-  Region missing_region = rect;
-  for (size_t i = 0; i < tilings_->num_tilings(); ++i) {
-    PictureLayerTiling* tiling = tilings_->tiling_at(i);
-    DCHECK(tiling->has_ever_been_updated());
-
-    if (tiling->resolution() == LOW_RESOLUTION) {
-      DCHECK(!low_res) << "There can only be one low res tiling";
-      low_res = tiling;
-    }
-    if (tiling->contents_scale() < min_acceptable_scale)
-      continue;
-    if (tiling->resolution() == HIGH_RESOLUTION) {
-      DCHECK(!high_res) << "There can only be one high res tiling";
-      high_res = tiling;
-      continue;
-    }
-    for (PictureLayerTiling::CoverageIterator iter(tiling,
-                                                   contents_scale_x(),
-                                                   rect);
-         iter;
-         ++iter) {
-      if (!*iter || !iter->IsReadyToDraw())
-        continue;
-
-      missing_region.Subtract(iter.geometry_rect());
-      iter->MarkRequiredForActivation();
-    }
-  }
-  DCHECK(high_res) << "There must be one high res tiling";
-
-  // If these pointers are null (because no twin, no matching tiling, or the
-  // simpification just below), then high res tiles will be required to fill any
-  // holes left by the first pass above.  If the pointers are valid, then this
-  // layer is allowed to skip any tiles that are not ready on its twin.
-  const PictureLayerTiling* twin_high_res = NULL;
-  const PictureLayerTiling* twin_low_res = NULL;
-
-  if (twin_layer_) {
-    // As a simplification, only allow activating to skip twin tiles that the
-    // active layer is also missing when both this layer and its twin have
-    // "simple" sets of tilings: only 2 tilings (high and low) or only 1 high
-    // res tiling. This avoids having to iterate/track coverage of non-ideal
-    // tilings during the last draw call on the active layer.
-    if (tilings_->num_tilings() <= 2 &&
-        twin_layer_->tilings_->num_tilings() <= tilings_->num_tilings()) {
-      twin_low_res = low_res ? GetTwinTiling(low_res) : NULL;
-      twin_high_res = high_res ? GetTwinTiling(high_res) : NULL;
-    }
-
-    // If this layer and its twin have different transforms, then don't compare
-    // them and only allow activating to high res tiles, since tiles on each
-    // layer will be in different places on screen.
-    if (twin_layer_->layer_tree_impl()->RequiresHighResToDraw() ||
-        bounds() != twin_layer_->bounds() ||
-        draw_properties().screen_space_transform !=
-            twin_layer_->draw_properties().screen_space_transform) {
-      twin_high_res = NULL;
-      twin_low_res = NULL;
-    }
-  }
-
-  // As a second pass, mark as required any visible high res tiles not filled in
-  // by acceptable non-ideal tiles from the first pass.
-  if (MarkVisibleTilesAsRequired(
-      high_res, twin_high_res, contents_scale_x(), rect, missing_region)) {
-    // As an optional third pass, if a high res tile was skipped because its
-    // twin was also missing, then fall back to mark low res tiles as required
-    // in case the active twin is substituting those for missing high res
-    // content. Only suitable, when low res is enabled.
-    if (low_res) {
-      MarkVisibleTilesAsRequired(
-          low_res, twin_low_res, contents_scale_x(), rect, missing_region);
-    }
-  }
-}
-
-bool PictureLayerImpl::MarkVisibleTilesAsRequired(
-    PictureLayerTiling* tiling,
-    const PictureLayerTiling* optional_twin_tiling,
-    float contents_scale,
-    const gfx::Rect& rect,
-    const Region& missing_region) const {
-  bool twin_had_missing_tile = false;
-  for (PictureLayerTiling::CoverageIterator iter(tiling,
-                                                 contents_scale,
-                                                 rect);
-       iter;
-       ++iter) {
-    Tile* tile = *iter;
-    // A null tile (i.e. missing recording) can just be skipped.
-    if (!tile)
-      continue;
-
-    // If the tile is occluded, don't mark it as required for activation.
-    if (tile->is_occluded())
-      continue;
-
-    // If the missing region doesn't cover it, this tile is fully
-    // covered by acceptable tiles at other scales.
-    if (!missing_region.Intersects(iter.geometry_rect()))
-      continue;
-
-    // If the twin tile doesn't exist (i.e. missing recording or so far away
-    // that it is outside the visible tile rect) or this tile is shared between
-    // with the twin, then this tile isn't required to prevent flashing.
-    if (optional_twin_tiling) {
-      Tile* twin_tile = optional_twin_tiling->TileAt(iter.i(), iter.j());
-      if (!twin_tile || twin_tile == tile) {
-        twin_had_missing_tile = true;
-        continue;
-      }
-    }
-
-    tile->MarkRequiredForActivation();
-  }
-  return twin_had_missing_tile;
-}
-
 void PictureLayerImpl::DoPostCommitInitialization() {
   DCHECK(needs_post_commit_initialization_);
   DCHECK(layer_tree_impl()->IsPendingTree());