[Arm]: Enable use of extended out-of-line constant pool for Arm.

src/arm/assembler-arm.h

 // Copyright (c) 1994-2006 Sun Microsystems Inc.
 // All Rights Reserved.
 //
 // Redistribution and use in source and binary forms, with or without
 // modification, are permitted provided that the following conditions
 // are met:
 //
 // - Redistributions of source code must retain the above copyright notice,
 // this list of conditions and the following disclaimer.
 //
@@ skipping 500 matching lines @@
     STATIC_ASSERT(kSmiTag == 0 && kSmiTagSize < kDoubleSizeLog2);
     return Operand(key, LSL, kDoubleSizeLog2 - kSmiTagSize);
   }
 
   // rm <shift_op> rs
   explicit Operand(Register rm, ShiftOp shift_op, Register rs);
 
   // Return true if this is a register operand.
   INLINE(bool is_reg() const);
 
-  // Return true if this operand fits in one instruction so that no
-  // 2-instruction solution with a load into the ip register is necessary. If
+  // Return the number of actual instructions required to implement the given
+  // instruction for this particular operand. This can be a single instruction,
+  // if no load into the ip register is necessary, or anything between 2 and 4
+  // instructions when we need to load from the constant pool (depending upon
+  // whether the constant pool entry is in the small or extended section). If
   // the instruction this operand is used for is a MOV or MVN instruction the
   // actual instruction to use is required for this calculation. For other
   // instructions instr is ignored.
-  bool is_single_instruction(const Assembler* assembler,
-                             Instr instr = 0) const;
+  //
+  // The value returned is only valid as long as no entries are added to the
+  // constant pool between this call and the actual instruction being emitted.
+  int instructions_required(const Assembler* assembler, Instr instr = 0) const;
   bool must_output_reloc_info(const Assembler* assembler) const;
 
   inline int32_t immediate() const {
     ASSERT(!rm_.is_valid());
     return imm32_;
   }
 
   Register rm() const { return rm_; }
   Register rs() const { return rs_; }
   ShiftOp shift_op() const { return shift_op_; }
@@ skipping 100 matching lines @@
  private:
   DoubleRegister base_;
   NeonListType type_;
 };
 
 
 // Class used to build a constant pool.
 class ConstantPoolBuilder BASE_EMBEDDED {
  public:
   explicit ConstantPoolBuilder();
-  void AddEntry(Assembler* assm, const RelocInfo& rinfo);
+  ConstantPoolArray::LayoutSection AddEntry(Assembler* assm,
+                                            const RelocInfo& rinfo);
   void Relocate(int pc_delta);
   bool IsEmpty();
   Handle<ConstantPoolArray> New(Isolate* isolate);
   void Populate(Assembler* assm, ConstantPoolArray* constant_pool);
 
-  inline int count_of_64bit() const { return count_of_64bit_; }
-  inline int count_of_code_ptr() const { return count_of_code_ptr_; }
-  inline int count_of_heap_ptr() const { return count_of_heap_ptr_; }
-  inline int count_of_32bit() const { return count_of_32bit_; }
+  inline ConstantPoolArray::LayoutSection current_section() const {
+    return current_section_;
+  }
+
+  inline ConstantPoolArray::NumberOfEntries* number_of_entries(
+      ConstantPoolArray::LayoutSection section) {
+    return &number_of_entries_[section];
+  }
+
+  inline ConstantPoolArray::NumberOfEntries* small_entries() {
+    return number_of_entries(ConstantPoolArray::SMALL_SECTION);
+  }
+
+  inline ConstantPoolArray::NumberOfEntries* extended_entries() {
+    return number_of_entries(ConstantPoolArray::EXTENDED_SECTION);
+  }
 
  private:
-  bool Is64BitEntry(RelocInfo::Mode rmode);
-  bool Is32BitEntry(RelocInfo::Mode rmode);
-  bool IsCodePtrEntry(RelocInfo::Mode rmode);
-  bool IsHeapPtrEntry(RelocInfo::Mode rmode);
+  struct ConstantPoolEntry {
+    ConstantPoolEntry(RelocInfo rinfo, ConstantPoolArray::LayoutSection section,
+                      int merged_index)
+        : rinfo_(rinfo), section_(section), merged_index_(merged_index) {}
 
-  // TODO(rmcilroy): This should ideally be a ZoneList, however that would mean
-  // RelocInfo would need to subclass ZoneObject which it currently doesn't.
-  std::vector<RelocInfo> entries_;
-  std::vector<int> merged_indexes_;
-  int count_of_64bit_;
-  int count_of_code_ptr_;
-  int count_of_heap_ptr_;
-  int count_of_32bit_;
+    RelocInfo rinfo_;
+    ConstantPoolArray::LayoutSection section_;
+    int merged_index_;
+  };
+
+  ConstantPoolArray::Type GetConstantPoolType(RelocInfo::Mode rmode);
+
+  std::vector<ConstantPoolEntry> entries_;
+  ConstantPoolArray::LayoutSection current_section_;
+  ConstantPoolArray::NumberOfEntries number_of_entries_[2];
 };
 
 struct VmovIndex {
   unsigned char index;
 };
 const VmovIndex VmovIndexLo = { 0 };
 const VmovIndex VmovIndexHi = { 1 };
 
 class Assembler : public AssemblerBase {
  public:
@@ skipping 33 matching lines @@
   // Note: The same Label can be used for forward and backward branches
   // but it may be bound only once.
 
   void bind(Label* L);  // binds an unbound label L to the current code position
 
   // Returns the branch offset to the given label from the current code position
   // Links the label to the current position if it is still unbound
   // Manages the jump elimination optimization if the second parameter is true.
   int branch_offset(Label* L, bool jump_elimination_allowed);
 
+  // Returns true if the given pc address is the start of a constant pool load
+  // instruction sequence.
+  INLINE(static bool is_constant_pool_load(Address pc));
+
   // Return the address in the constant pool of the code target address used by
   // the branch/call instruction at pc, or the object in a mov.
   INLINE(static Address constant_pool_entry_address(
     Address pc, ConstantPoolArray* constant_pool));
 
   // Read/Modify the code target address in the branch/call instruction at pc.
   INLINE(static Address target_address_at(Address pc,
                                           ConstantPoolArray* constant_pool));
   INLINE(static void set_target_address_at(Address pc,
                                            ConstantPoolArray* constant_pool,
@@ skipping 616 matching lines @@
   static Instr instr_at(byte* pc) { return *reinterpret_cast<Instr*>(pc); }
   static void instr_at_put(byte* pc, Instr instr) {
     *reinterpret_cast<Instr*>(pc) = instr;
   }
   static Condition GetCondition(Instr instr);
   static bool IsBranch(Instr instr);
   static int GetBranchOffset(Instr instr);
   static bool IsLdrRegisterImmediate(Instr instr);
   static bool IsVldrDRegisterImmediate(Instr instr);
   static Instr GetConsantPoolLoadPattern();
+  static Instr GetConsantPoolLoadMask();
+  static bool IsLdrPpRegOffset(Instr instr);
+  static Instr GetLdrPpRegOffsetPattern();
   static bool IsLdrPpImmediateOffset(Instr instr);
   static bool IsVldrDPpImmediateOffset(Instr instr);
   static int GetLdrRegisterImmediateOffset(Instr instr);
   static int GetVldrDRegisterImmediateOffset(Instr instr);
   static Instr SetLdrRegisterImmediateOffset(Instr instr, int offset);
   static Instr SetVldrDRegisterImmediateOffset(Instr instr, int offset);
   static bool IsStrRegisterImmediate(Instr instr);
   static Instr SetStrRegisterImmediateOffset(Instr instr, int offset);
   static bool IsAddRegisterImmediate(Instr instr);
   static Instr SetAddRegisterImmediateOffset(Instr instr, int offset);
@@ skipping 10 matching lines @@
   static bool IsVldrDPcImmediateOffset(Instr instr);
   static bool IsBlxReg(Instr instr);
   static bool IsBlxIp(Instr instr);
   static bool IsTstImmediate(Instr instr);
   static bool IsCmpRegister(Instr instr);
   static bool IsCmpImmediate(Instr instr);
   static Register GetCmpImmediateRegister(Instr instr);
   static int GetCmpImmediateRawImmediate(Instr instr);
   static bool IsNop(Instr instr, int type = NON_MARKING_NOP);
   static bool IsMovT(Instr instr);
+  static Instr GetMovTPattern();
   static bool IsMovW(Instr instr);
+  static Instr GetMovWPattern();
+  static Instr EncodeMovwImmediate(uint32_t immediate);
+  static Instr PatchMovwImmediate(Instr instruction, uint32_t immediate);
 
   // Constants in pools are accessed via pc relative addressing, which can
   // reach +/-4KB for integer PC-relative loads and +/-1KB for floating-point
   // PC-relative loads, thereby defining a maximum distance between the
   // instruction and the accessed constant.
   static const int kMaxDistToIntPool = 4*KB;
   static const int kMaxDistToFPPool = 1*KB;
   // All relocations could be integer, it therefore acts as the limit.
   static const int kMaxNumPending32RelocInfo = kMaxDistToIntPool/kInstrSize;
   static const int kMaxNumPending64RelocInfo = kMaxDistToFPPool/kInstrSize;
 
   // Postpone the generation of the constant pool for the specified number of
   // instructions.
   void BlockConstPoolFor(int instructions);
 
   // Check if is time to emit a constant pool.
   void CheckConstPool(bool force_emit, bool require_jump);
 
   // Allocate a constant pool of the correct size for the generated code.
   Handle<ConstantPoolArray> NewConstantPool(Isolate* isolate);
 
   // Generate the constant pool for the generated code.
   void PopulateConstantPool(ConstantPoolArray* constant_pool);
 
-  bool can_use_constant_pool() const {
-    return is_constant_pool_available() && !constant_pool_full_;
+  bool is_constant_pool_available() const { return constant_pool_available_; }
+
+  bool use_extended_constant_pool() const {
+    return constant_pool_builder_.current_section() ==
+           ConstantPoolArray::EXTENDED_SECTION;
   }
 
-  void set_constant_pool_full() {
-    constant_pool_full_ = true;
-  }
 
  protected:
   // Relocation for a type-recording IC has the AST id added to it.  This
   // member variable is a way to pass the information from the call site to
   // the relocation info.
   TypeFeedbackId recorded_ast_id_;
 
   int buffer_space() const { return reloc_info_writer.pos() - pc_; }
 
   // Decode branch instruction at pos and return branch target pos
@@ skipping 34 matching lines @@
       //    trigger a check.
       next_buffer_check_ = no_const_pool_before_;
     }
   }
 
   bool is_const_pool_blocked() const {
     return (const_pool_blocked_nesting_ > 0) ||
            (pc_offset() < no_const_pool_before_);
   }
 
-  bool is_constant_pool_available() const {
-    return constant_pool_available_;
-  }
-
   void set_constant_pool_available(bool available) {
     constant_pool_available_ = available;
   }
 
  private:
   int next_buffer_check_;  // pc offset of next buffer check
 
   // Code generation
   // The relocation writer's position is at least kGap bytes below the end of
   // the generated instructions. This is so that multi-instruction sequences do
@@ skipping 49 matching lines @@
   int num_pending_64_bit_reloc_info_;
 
   ConstantPoolBuilder constant_pool_builder_;
 
   // The bound position, before this we cannot do instruction elimination.
   int last_bound_pos_;
 
   // Indicates whether the constant pool can be accessed, which is only possible
   // if the pp register points to the current code object's constant pool.
   bool constant_pool_available_;
-  // Indicates whether the constant pool is too full to accept new entries due
-  // to the ldr instruction's limitted immediate offset range.
-  bool constant_pool_full_;
 
   // Code emission
   inline void CheckBuffer();
   void GrowBuffer();
   inline void emit(Instr x);
 
   // 32-bit immediate values
   void move_32_bit_immediate(Register rd,
                              const Operand& x,
                              Condition cond = al);
@@ skipping 11 matching lines @@
   void next(Label* L);
 
   enum UseConstantPoolMode {
     USE_CONSTANT_POOL,
     DONT_USE_CONSTANT_POOL
   };
 
   // Record reloc info for current pc_
   void RecordRelocInfo(RelocInfo::Mode rmode, intptr_t data = 0);
   void RecordRelocInfo(const RelocInfo& rinfo);
-  void ConstantPoolAddEntry(const RelocInfo& rinfo);
+  ConstantPoolArray::LayoutSection ConstantPoolAddEntry(const RelocInfo& rinfo);
 
   friend class RelocInfo;
   friend class CodePatcher;
   friend class BlockConstPoolScope;
   friend class FrameAndConstantPoolScope;
   friend class ConstantPoolUnavailableScope;
 
   PositionsRecorder positions_recorder_;
   friend class PositionsRecorder;
   friend class EnsureSpace;
 };
 
 
 class EnsureSpace BASE_EMBEDDED {
  public:
   explicit EnsureSpace(Assembler* assembler) {
     assembler->CheckBuffer();
   }
 };
 
 
 } }  // namespace v8::internal
 
 #endif  // V8_ARM_ASSEMBLER_ARM_H_