Adding ath6kl driver support to compat-wireless

chromeos/compat-wireless/drivers/staging/ath6kl/include/hci_transport_api.h

Index: chromeos/compat-wireless/drivers/staging/ath6kl/include/hci_transport_api.h
diff --git a/chromeos/compat-wireless/drivers/staging/ath6kl/include/hci_transport_api.h b/chromeos/compat-wireless/drivers/staging/ath6kl/include/hci_transport_api.h
new file mode 100644
index 0000000000000000000000000000000000000000..b5157ea5d9e9e33c7ee6e4a2c0a51c9e97c26ca3
--- /dev/null
+++ b/chromeos/compat-wireless/drivers/staging/ath6kl/include/hci_transport_api.h
@@ -0,0 +1,259 @@
+//------------------------------------------------------------------------------
+// Copyright (c) 2009-2010 Atheros Corporation.  All rights reserved.
+// 
+//
+// Permission to use, copy, modify, and/or distribute this software for any
+// purpose with or without fee is hereby granted, provided that the above
+// copyright notice and this permission notice appear in all copies.
+//
+// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+//
+//
+//------------------------------------------------------------------------------
+//==============================================================================
+// Author(s): ="Atheros"
+//==============================================================================
+#ifndef _HCI_TRANSPORT_API_H_
+#define _HCI_TRANSPORT_API_H_
+
+    /* Bluetooth HCI packets are stored in HTC packet containers */
+#include "htc_packet.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+typedef void *HCI_TRANSPORT_HANDLE;
+
+typedef HTC_ENDPOINT_ID HCI_TRANSPORT_PACKET_TYPE; 
+
+    /* we map each HCI packet class to a static Endpoint ID */
+#define HCI_COMMAND_TYPE   ENDPOINT_1
+#define HCI_EVENT_TYPE     ENDPOINT_2
+#define HCI_ACL_TYPE       ENDPOINT_3
+#define HCI_PACKET_INVALID ENDPOINT_MAX
+
+#define HCI_GET_PACKET_TYPE(pP)    (pP)->Endpoint
+#define HCI_SET_PACKET_TYPE(pP,s)  (pP)->Endpoint = (s)
+
+/* callback when an HCI packet was completely sent */
+typedef void   (*HCI_TRANSPORT_SEND_PKT_COMPLETE)(void *, HTC_PACKET *);
+/* callback when an HCI packet is received */
+typedef void   (*HCI_TRANSPORT_RECV_PKT)(void *, HTC_PACKET *);
+/* Optional receive buffer re-fill callback,
+ * On some OSes (like Linux) packets are allocated from a global pool and indicated up
+ * to the network stack.  The driver never gets the packets back from the OS.  For these OSes
+ * a refill callback can be used to allocate and re-queue buffers into HTC.
+ * A refill callback is used for the reception of ACL and EVENT packets.  The caller must
+ * set the watermark trigger point to cause a refill.
+ */
+typedef void   (*HCI_TRANSPORT_RECV_REFILL)(void *, HCI_TRANSPORT_PACKET_TYPE Type, int BuffersAvailable);
+/* Optional receive packet refill
+ * On some systems packet buffers are an extremely limited resource.  Rather than
+ * queue largest-possible-sized buffers to the HCI bridge, some systems would rather
+ * allocate a specific size as the packet is received.  The trade off is
+ * slightly more processing (callback invoked for each RX packet)
+ * for the benefit of committing fewer buffer resources into the bridge.
+ *
+ * The callback is provided the length of the pending packet to fetch. This includes the
+ * full transport header, HCI header, plus the length of payload.  The callback can return a pointer to
+ * the allocated HTC packet for immediate use.
+ *
+ * NOTE*** This callback is mutually exclusive with the the refill callback above.
+ *
+ * */
+typedef HTC_PACKET *(*HCI_TRANSPORT_RECV_ALLOC)(void *, HCI_TRANSPORT_PACKET_TYPE Type, int Length);
+
+typedef enum _HCI_SEND_FULL_ACTION {
+    HCI_SEND_FULL_KEEP = 0,  /* packet that overflowed should be kept in the queue */
+    HCI_SEND_FULL_DROP = 1,  /* packet that overflowed should be dropped */
+} HCI_SEND_FULL_ACTION;
+
+/* callback when an HCI send queue exceeds the caller's MaxSendQueueDepth threshold,
+ * the callback must return the send full action to take (either DROP or KEEP) */
+typedef HCI_SEND_FULL_ACTION  (*HCI_TRANSPORT_SEND_FULL)(void *, HTC_PACKET *);
+
+typedef struct {
+    int    HeadRoom;      /* number of bytes in front of HCI packet for header space */
+    int    TailRoom;      /* number of bytes at the end of the HCI packet for tail space */
+    int    IOBlockPad;    /* I/O block padding required (always a power of 2) */
+} HCI_TRANSPORT_PROPERTIES;
+
+typedef struct _HCI_TRANSPORT_CONFIG_INFO {
+    int      ACLRecvBufferWaterMark;     /* low watermark to trigger recv refill */
+    int      EventRecvBufferWaterMark;   /* low watermark to trigger recv refill */  
+    int      MaxSendQueueDepth;          /* max number of packets in the single send queue */
+    void     *pContext;                  /* context for all callbacks */
+    void     (*TransportFailure)(void *pContext, A_STATUS Status); /* transport failure callback */
+    A_STATUS (*TransportReady)(HCI_TRANSPORT_HANDLE, HCI_TRANSPORT_PROPERTIES *,void *pContext); /* transport is ready */
+    void     (*TransportRemoved)(void *pContext);                  /* transport was removed */
+        /* packet processing callbacks */
+    HCI_TRANSPORT_SEND_PKT_COMPLETE    pHCISendComplete;
+    HCI_TRANSPORT_RECV_PKT             pHCIPktRecv;
+    HCI_TRANSPORT_RECV_REFILL          pHCIPktRecvRefill;
+    HCI_TRANSPORT_RECV_ALLOC           pHCIPktRecvAlloc;
+    HCI_TRANSPORT_SEND_FULL            pHCISendFull;
+} HCI_TRANSPORT_CONFIG_INFO;
+
+/* ------ Function Prototypes ------ */
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Attach to the HCI transport module
+  @function name: HCI_TransportAttach
+  @input:  HTCHandle - HTC handle (see HTC apis)
+           pInfo - initialization information
+  @output:
+  @return: HCI_TRANSPORT_HANDLE on success, NULL on failure
+  @notes:    The HTC module provides HCI transport services.
+  @example:
+  @see also: HCI_TransportDetach
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+HCI_TRANSPORT_HANDLE HCI_TransportAttach(void *HTCHandle, HCI_TRANSPORT_CONFIG_INFO *pInfo);
+
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Detach from the HCI transport module
+  @function name: HCI_TransportDetach
+  @input:  HciTrans - HCI transport handle
+           pInfo - initialization information
+  @output:
+  @return: 
+  @notes:  
+  @example:
+  @see also: 
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+void HCI_TransportDetach(HCI_TRANSPORT_HANDLE HciTrans);
+
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Add receive packets to the HCI transport
+  @function name: HCI_TransportAddReceivePkts
+  @input:  HciTrans - HCI transport handle
+           pQueue - a queue holding one or more packets
+  @output:
+  @return: A_OK on success
+  @notes:  user must supply HTC packets for capturing incomming HCI packets.  The caller
+           must initialize each HTC packet using the SET_HTC_PACKET_INFO_RX_REFILL()
+           macro. Each packet in the queue must be of the same type and length 
+  @example:
+  @see also:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+A_STATUS    HCI_TransportAddReceivePkts(HCI_TRANSPORT_HANDLE HciTrans, HTC_PACKET_QUEUE *pQueue);
+
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Send an HCI packet packet
+  @function name: HCI_TransportSendPkt
+  @input:  HciTrans - HCI transport handle
+           pPacket - packet to send
+           Synchronous - send the packet synchronously (blocking)
+  @output:
+  @return: A_OK
+  @notes:  Caller must initialize packet using SET_HTC_PACKET_INFO_TX() and
+           HCI_SET_PACKET_TYPE() macros to prepare the packet. 
+           If Synchronous is set to FALSE the call is fully asynchronous.  On error or completion, 
+           the registered send complete callback will be called.
+           If Synchronous is set to TRUE, the call will block until the packet is sent, if the
+           interface cannot send the packet within a 2 second timeout, the function will return 
+           the failure code : A_EBUSY.
+           
+           Synchronous Mode should only be used at start-up to initialize the HCI device using 
+           custom HCI commands.  It should NOT be mixed with Asynchronous operations.  Mixed synchronous
+           and asynchronous operation behavior is undefined.
+           
+  @example:
+  @see also: 
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+A_STATUS    HCI_TransportSendPkt(HCI_TRANSPORT_HANDLE HciTrans, HTC_PACKET *pPacket, A_BOOL Synchronous);
+
+
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Stop HCI transport
+  @function name: HCI_TransportStop
+  @input:  HciTrans - hci transport handle 
+  @output:
+  @return:
+  @notes: HCI transport communication will be halted.  All receive and pending TX packets will
+          be flushed.
+  @example:
+  @see also:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+void        HCI_TransportStop(HCI_TRANSPORT_HANDLE HciTrans);
+
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Start the HCI transport
+  @function name: HCI_TransportStart
+  @input:  HciTrans - hci transport handle 
+  @output:
+  @return: A_OK on success
+  @notes: HCI transport communication will begin, the caller can expect the arrival
+          of HCI recv packets as soon as this call returns.
+  @example:
+  @see also:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+A_STATUS    HCI_TransportStart(HCI_TRANSPORT_HANDLE HciTrans);
+
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Enable or Disable Asynchronous Recv
+  @function name: HCI_TransportEnableDisableAsyncRecv
+  @input:  HciTrans - hci transport handle 
+           Enable - enable or disable asynchronous recv
+  @output:
+  @return: A_OK on success
+  @notes: This API must be called when HCI recv is handled synchronously
+  @example:
+  @see also:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+A_STATUS    HCI_TransportEnableDisableAsyncRecv(HCI_TRANSPORT_HANDLE HciTrans, A_BOOL Enable);
+
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Receive an event packet from the HCI transport synchronously using polling
+  @function name: HCI_TransportRecvHCIEventSync
+  @input:  HciTrans - hci transport handle 
+           pPacket - HTC packet to hold the recv data
+           MaxPollMS - maximum polling duration in Milliseconds;
+  @output: 
+  @return: A_OK on success
+  @notes: This API should be used only during HCI device initialization, the caller must call
+          HCI_TransportEnableDisableAsyncRecv with Enable=FALSE prior to using this API. 
+          This API will only capture HCI Event packets.
+  @example:
+  @see also: HCI_TransportEnableDisableAsyncRecv
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+A_STATUS    HCI_TransportRecvHCIEventSync(HCI_TRANSPORT_HANDLE HciTrans, 
+                                          HTC_PACKET           *pPacket,
+                                          int                  MaxPollMS);
+
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Set the desired baud rate for the underlying transport layer
+  @function name: HCI_TransportSetBaudRate
+  @input:  HciTrans - hci transport handle 
+           Baud - baud rate in bps
+  @output: 
+  @return: A_OK on success
+  @notes: This API should be used only after HCI device initialization
+  @example:
+  @see also: 
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+A_STATUS    HCI_TransportSetBaudRate(HCI_TRANSPORT_HANDLE HciTrans, A_UINT32 Baud);
+
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Enable/Disable HCI Transport Power Management
+  @function name: HCI_TransportEnablePowerMgmt
+  @input:  HciTrans - hci transport handle 
+           Enable - 1 = Enable, 0 = Disable
+  @output: 
+  @return: A_OK on success
+  @notes: 
+  @example:
+  @see also: 
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+A_STATUS HCI_TransportEnablePowerMgmt(HCI_TRANSPORT_HANDLE HciTrans, A_BOOL Enable);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _HCI_TRANSPORT_API_H_ */