Roll Linux reference build to official build 30.0.1599.33

chrome_linux/installer/common/rpm.include

+@@include@@variables.include
+
+# Install the repository signing key (see also:
+# http://www.google.com/linuxrepositories/aboutkey.html)
+install_rpm_key() {
+  # Check to see if key already exists.
+  rpm -q gpg-pubkey-7fac5991-4615767f > /dev/null 2>&1
+  if [ "$?" -eq "0" ]; then
+    # Key already exists
+    return 0
+  fi
+  # This is to work around a bug in RPM 4.7.0. (see http://crbug.com/22312)
+  rpm -q gpg-pubkey-7fac5991-45f06f46 > /dev/null 2>&1
+  if [ "$?" -eq "0" ]; then
+    # Key already exists
+    return 0
+  fi
+
+  # RPM on Mandriva 2009 is dumb and does not understand "rpm --import -"
+  TMPKEY=$(mktemp /tmp/google.sig.XXXXXX)
+  if [ -n "$TMPKEY" ]; then
+    cat > "$TMPKEY" <<KEYDATA
+-----BEGIN PGP PUBLIC KEY BLOCK-----
+Version: GnuPG v1.4.2.2 (GNU/Linux)
+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+=Quqp
+-----END PGP PUBLIC KEY BLOCK-----
+KEYDATA
+    rpm --import "$TMPKEY"
+    rc=$?
+    rm -f "$TMPKEY"
+    if [ "$rc" -eq "0" ]; then
+      return 0
+    fi
+  fi
+  return 1
+}
+
+determine_rpm_package_manager() {
+  local RELEASE
+  LSB_RELEASE="$(which lsb_release 2> /dev/null)"
+  if [ -x "$LSB_RELEASE" ]; then
+    RELEASE=$(lsb_release -i 2> /dev/null | sed 's/:\t/:/' | cut -d ':' -f 2-)
+    case $RELEASE in
+    "Fedora")
+      PACKAGEMANAGER=yum
+      ;;
+    "MandrivaLinux")
+      PACKAGEMANAGER=urpmi
+      ;;
+    "SUSE LINUX")
+      PACKAGEMANAGER=yast
+      ;;
+    esac
+  fi
+
+  if [ "$PACKAGEMANAGER" ]; then
+    return
+  fi
+
+  # Fallback methods that are probably unnecessary on modern systems.
+  if [ -f "/etc/lsb-release" ]; then
+    # file missing on Fedora, does not contain DISTRIB_ID on OpenSUSE.
+    eval $(sed -e '/DISTRIB_ID/!d' /etc/lsb-release)
+    case $DISTRIB_ID in
+    MandrivaLinux)
+      PACKAGEMANAGER=urpmi
+      ;;
+    esac
+  fi
+
+  if [ "$PACKAGEMANAGER" ]; then
+    return
+  fi
+
+  if [ -f "/etc/fedora-release" ] || [ -f "/etc/redhat-release" ]; then
+    PACKAGEMANAGER=yum
+  elif [ -f "/etc/SuSE-release" ]; then
+    PACKAGEMANAGER=yast
+  elif [ -f "/etc/mandriva-release" ]; then
+    PACKAGEMANAGER=urpmi
+  fi
+}
+
+DEFAULT_ARCH="@@ARCHITECTURE@@"
+YUM_REPO_FILE="/etc/yum.repos.d/@@PACKAGE@@.repo"
+ZYPPER_REPO_FILE="/etc/zypp/repos.d/@@PACKAGE@@.repo"
+URPMI_REPO_FILE="/etc/urpmi/urpmi.cfg"
+
+install_yum() {
+  install_rpm_key
+
+  if [ ! "$REPOCONFIG" ]; then
+    return 0
+  fi
+
+  if [ -d "/etc/yum.repos.d" ]; then
+cat > "$YUM_REPO_FILE" << REPOCONTENT
+[@@PACKAGE@@]
+name=@@PACKAGE@@
+baseurl=$REPOCONFIG/$DEFAULT_ARCH
+enabled=1
+gpgcheck=1
+REPOCONTENT
+  fi
+}
+
+# This is called by the cron job, rather than in the RPM postinstall.
+# We cannot do this during the install when urpmi is running due to
+# database locking. We also need to enable the repository, and we can
+# only do that while we are online.
+# see: https://qa.mandriva.com/show_bug.cgi?id=31893
+configure_urpmi() {
+  if [ ! "$REPOCONFIG" ]; then
+    return 0
+  fi
+
+  urpmq --list-media | grep -q -s "^@@PACKAGE@@$"
+  if [ "$?" -eq "0" ]; then
+    # Repository already configured
+    return 0
+  fi
+  urpmi.addmedia --update \
+    "@@PACKAGE@@" "$REPOCONFIG/$DEFAULT_ARCH"
+}
+
+install_urpmi() {
+  # urpmi not smart enough to pull media_info/pubkey from the repository?
+  install_rpm_key
+
+  # Defer urpmi.addmedia to configure_urpmi() in the cron job.
+  # See comment there.
+  #
+  # urpmi.addmedia --update \
+  #   "@@PACKAGE@@" "$REPOCONFIG/$DEFAULT_ARCH"
+}
+
+install_yast() {
+  if [ ! "$REPOCONFIG" ]; then
+    return 0
+  fi
+
+  # We defer adding the key to later. See comment in the cron job.
+
+  # Ideally, we would run: zypper addrepo -t YUM -f \
+  # "$REPOCONFIG/$DEFAULT_ARCH" "@@PACKAGE@@"
+  # but that does not work when zypper is running.
+  if [ -d "/etc/zypp/repos.d" ]; then
+cat > "$ZYPPER_REPO_FILE" << REPOCONTENT
+[@@PACKAGE@@]
+name=@@PACKAGE@@
+enabled=1
+autorefresh=1
+baseurl=$REPOCONFIG/$DEFAULT_ARCH
+type=rpm-md
+keeppackages=0
+REPOCONTENT
+  fi
+}
+
+# Check if the automatic repository configuration is done, so we know when to
+# stop trying.
+verify_install() {
+  # It's probably enough to see that the repo configs have been created. If they
+  # aren't configured properly, update_bad_repo should catch that when it's run.
+  case $1 in
+  "yum")
+    [ -f "$YUM_REPO_FILE" ]
+    ;;
+  "yast")
+    [ -f "$ZYPPER_REPO_FILE" ]
+    ;;
+  "urpmi")
+    urpmq --list-url | grep -q -s "\b@@PACKAGE@@\b"
+    ;;
+  esac
+}
+
+# Update the Google repository if it's not set correctly.
+update_bad_repo() {
+  if [ ! "$REPOCONFIG" ]; then
+    return 0
+  fi
+
+  determine_rpm_package_manager
+
+  case $PACKAGEMANAGER in
+  "yum")
+    update_repo_file "$YUM_REPO_FILE"
+    ;;
+  "yast")
+    update_repo_file "$ZYPPER_REPO_FILE"
+    ;;
+  "urpmi")
+    update_urpmi_cfg
+    ;;
+  esac
+}
+
+update_repo_file() {
+  REPO_FILE="$1"
+
+  # Don't do anything if the file isn't there, since that probably means the
+  # user disabled it.
+  if [ ! -r "$REPO_FILE" ]; then
+    return 0
+  fi
+
+  # Check if the correct repository configuration is in there.
+  REPOMATCH=$(grep "^baseurl=$REPOCONFIG/$DEFAULT_ARCH" "$REPO_FILE" \
+    2>/dev/null)
+  # If it's there, nothing to do
+  if [ "$REPOMATCH" ]; then
+    return 0
+  fi
+
+  # Check if it's there but disabled by commenting out (as opposed to using the
+  # 'enabled' setting).
+  MATCH_DISABLED=$(grep "^[[:space:]]*#.*baseurl=$REPOCONFIG/$DEFAULT_ARCH" \
+    "$REPO_FILE" 2>/dev/null)
+  if [ "$MATCH_DISABLED" ]; then
+    # It's OK for it to be disabled, as long as nothing bogus is enabled in its
+    # place.
+    ACTIVECONFIGS=$(grep "^baseurl=.*" "$REPO_FILE" 2>/dev/null)
+    if [ ! "$ACTIVECONFIGS" ]; then
+      return 0
+    fi
+  fi
+
+  # If we get here, the correct repository wasn't found, or something else is
+  # active, so fix it. This assumes there is a 'baseurl' setting, but if not,
+  # then that's just another way of disabling, so we won't try to add it.
+  sed -i -e "s,^baseurl=.*,baseurl=$REPOCONFIG/$DEFAULT_ARCH," "$REPO_FILE"
+}
+
+update_urpmi_cfg() {
+  REPOCFG=$(urpmq --list-url | grep "\b@@PACKAGE@@\b")
+  if [ ! "$REPOCFG" ]; then
+    # Don't do anything if the repo isn't there, since that probably means the
+    # user deleted it.
+    return 0
+  fi
+
+  # See if it's the right repo URL
+  REPOMATCH=$(echo "$REPOCFG" | grep "\b$REPOCONFIG/$DEFAULT_ARCH\b")
+  # If so, nothing to do
+  if [ "$REPOMATCH" ]; then
+    return 0
+  fi
+
+  # Looks like it's the wrong URL, so recreate it.
+  urpmi.removemedia "@@PACKAGE@@" && \
+    urpmi.addmedia --update "@@PACKAGE@@" "$REPOCONFIG/$DEFAULT_ARCH"
+}
+
+# We only remove the repository configuration during a purge. Since RPM has
+# no equivalent to dpkg --purge, the code below is actually never used. We
+# keep it only for reference purposes, should we ever need it.
+#
+#remove_yum() {
+#  rm -f "$YUM_REPO_FILE"
+#}
+#
+#remove_urpmi() {
+#  # Ideally, we would run: urpmi.removemedia "@@PACKAGE@@"
+#  # but that does not work when urpmi is running.
+#  # Sentinel comment text does not work either because urpmi.update removes
+#  # all comments. So we just delete the entry that matches what we originally
+#  # inserted. If such an entry was added manually, that's tough luck.
+#  if [ -f "$URPMI_REPO_FILE" ]; then
+#    sed -i '\_^@@PACKAGE@@ $REPOCONFIG/$DEFAULT_ARCH {$_,/^}$/d' "$URPMI_REPO_FILE"
+#  fi
+#}
+#
+#remove_yast() {
+#  # Ideally, we would run: zypper removerepo "@@PACKAGE@@"
+#  # but that does not work when zypper is running.
+#  rm -f /etc/zypp/repos.d/@@PACKAGE@@.repo
+#}
+
+DEFAULT_ARCH="@@ARCHITECTURE@@"
+
+get_lib_dir() {
+  if [ "$DEFAULT_ARCH" = "i386" ]; then
+    LIBDIR=lib
+  elif [ "$DEFAULT_ARCH" = "x86_64" ]; then
+    LIBDIR=lib64
+  else
+    echo Unknown CPU Architecture: "$DEFAULT_ARCH"
+    exit 1
+  fi
+}